[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B6A08C587958942AA3002690DD4F8C3D09274C4@cosmail02.lsi.com>
Date: Fri, 18 Jun 2010 15:21:02 -0600
From: "Yang, Bo" <Bo.Yang@....com>
To: Yinghai Lu <yinghai@...nel.org>
CC: "James.Bottomley@...senPartnership.com"
<James.Bottomley@...senpartnership.com>,
"James.Bottomley@...e.de" <James.Bottomley@...e.de>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"akpm@...l.org" <akpm@...l.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 1/12] scsi: megaraid_sas - Online Controller Reset - I:
Enable Online Controller Reset Bit in register related functions
Yinghai,
You need to apply patches 1/12 to 8/12 for this online controller reset (OCR) support.
Regards,
Bo Yang
-----Original Message-----
From: yhlu.kernel@...il.com [mailto:yhlu.kernel@...il.com] On Behalf Of Yinghai Lu
Sent: Friday, June 18, 2010 5:19 PM
To: Yang, Bo
Cc: James.Bottomley@...senPartnership.com; James.Bottomley@...e.de; linux-scsi@...r.kernel.org; akpm@...l.org; linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/12] scsi: megaraid_sas - Online Controller Reset - I: Enable Online Controller Reset Bit in register related functions
On Wed, Jun 9, 2010 at 7:34 PM, Yang, Bo <Bo.Yang@....com> wrote:
> Enable the Online Controller reset bit in the register related functions. This is first part of the Online Controller Reset.
> The driver supports XScle and Gen2 chips. Driver need to read the FW state register to see if there is FW state change
> Happen.
>
> Signed-off-by Bo Yang<bo.yang@....com>
This patch cause kernel hang just after
[ 136.996297] megasas: FW now in Ready state
# lspci -vvxxx -s 01:00.0
01:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 03)
Subsystem: LSI Logic / Symbios Logic MegaRAID SAS 9262-8i
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at 1c00 [size=256]
Region 1: Memory at aaefc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at aae80000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at aae40000 [disabled] [size=256K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range BC, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [d0] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] MSI-X: Enable- Count=15 Masked-
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003800
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [138] Power Budgeting <?>
Kernel driver in use: megaraid_sas
00: 00 10 79 00 47 01 10 00 03 00 04 01 40 00 00 00
10: 01 1c 00 00 04 c0 ef aa 00 00 00 00 04 00 e8 aa
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 62 92
30: 00 00 e4 aa 50 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 68 03 06 08 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 01 00 00 10 d0 02 00 25 80 00 10
70: 17 28 00 00 82 04 00 00 40 00 42 10 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 16 00 00 00
90: 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 05 c0 80 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 11 00 0e 00 01 20 00 00 01 38 00 00 00 00 00 00
d0: 03 a8 ff 1f 82 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
YH
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists