Message-Id: <1276832283-12084-1-git-send-email-alan@signal11.us>
Date:	Thu, 17 Jun 2010 23:38:03 -0400
From:	Alan Ott <alan@...nal11.us>
To:	Randy Dunlap <rdunlap@...otime.net>, Jiri Kosina <jkosina@...e.cz>,
	linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-doc@...r.kernel.org
Cc:	Alan Ott <alan@...nal11.us>
Subject: [PATCH] HID: Documentation for hidraw

Documenation for the hidraw driver.

Signed-off-by: Alan Ott <alan@...nal11.us>
---
 The information in this patch relies on:
  [PATCH v2] HID: Add Support for Setting and Getting Feature  Reports from hidraw
  which has been applied by Jiri Kosina.

 Please provide comments. I'm sure someone here will have a better idea where
 to put this than the root of Documentation/. I didn't see a better place, as
 hidraw is used for both Bluetooth and USB.

 Documentation/hidraw.txt |  283 ++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 283 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/hidraw.txt

diff --git a/Documentation/hidraw.txt b/Documentation/hidraw.txt
new file mode 100644
index 0000000..7153a06
--- /dev/null
+++ b/Documentation/hidraw.txt
@@ -0,0 +1,283 @@
+      HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices 
+     ==================================================================
+
+The hidraw driver provides a raw interface to USB and Bluetooth Human
+Interface Devices (HIDs).  It differs from hiddev in that reports sent and
+received are not parsed by the HID parser, but are sent to and received from
+the device unmodified.
+
+Hidraw should be used if the userspace application knows exactly how to
+communicate with the hardware device, and is able to construct the HID
+reports manually.  This is often the case when making userspace drivers for
+custom HID devices.
+
+Hidraw is also useful for communicating with non-conformant HID devices
+which send and receive data in a way that is inconsistent with their report
+descriptors.  Because hiddev parses reports which are sent and received
+through it and checks them against the device's report descriptor, such
+communication with these non-conformant devices is impossible using hiddev.
+
+Hidraw uses a dynamic major number, meaning that udev should be relied on to
+create hidraw device nodes.  Udev will typically create the device nodes
+directly under /dev (eg: /dev/hidraw0).  As this location is distribution-
+and udev rule-dependent, applications should use libudev to locate hidraw
+devices attached to the system.  There is a tutorial on libudev with a
+working example at:
+	http://www.signal11.us/oss/udev/
+
+The HIDRAW API
+---------------
+
+read()
+-------
+read() will read a queued report received from the HID device. On USB
+devices, the reports read using read() are the reports sent from the device
+on the INTERRUPT IN endpoint.  By default, read() will block until there is
+a report available to be read.  read() can be made non-blocking, by passing
+the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using
+fcntl().
+
+On a device which uses numbered reports, the first byte of the returned data
+will be the report number; the report data follows, beginning in the second
+byte.  For devices which do not use numbered reports, the report data
+will begin at the first byte.
+
+write()
+--------
+The write() function will write a report to the device. For USB devices, if
+the device has an INTERRUPT OUT endpoint, the report will be sent on that
+endpoint. If it does not, the report will be sent over the control endpoint,
+using a SET_REPORT transfer.
+
+The first byte of the buffer passed to write() should be set to the report
+number.  If the device does not use numbered reports, the first byte should
+be set to 0. The report data itself should begin at the second byte.
+
+ioctl()
+--------
+Hidraw supports the following ioctls:
+
+HIDIOCGRDESCSIZE: Get Report Descriptor Size
+This ioctl will get the size of the device's report descriptor.
+
+HIDIOCGRDESC: Get Report Descriptor
+This ioctl returns the device's report descriptor using a
+hidraw_report_descriptor struct.  Make sure to set the size field of the
+hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
+
+HIDIOCGRAWINFO: Get Raw Info
+This ioctl will return a hidraw_devinfo struct containing the bus type, the
+vendor ID (VID), and product ID (PID) of the device. The bus type can be one
+of:
+	BUS_USB
+	BUS_HIL
+	BUS_BLUETOOTH
+	BUS_VIRTUAL
+which are defined in linux/input.h.
+
+HIDIOCGRAWNAME(len): Get Raw Name
+This ioctl returns a string containing the vendor and product strings of
+the device.  The returned string is Unicode, UTF-8 encoded.
+
+HIDIOCGRAWPHYS(len): Get Physical Address
+This ioctl returns a string representing the physical address of the device.
+For USB devices, the string contains the physical path to the device (the
+USB controller, hubs, ports, etc).  For Bluetooth devices, the string
+contains the hardware (MAC) address of the device.
+
+HIDIOCSFEATURE(len): Send a Feature Report
+This ioctl will send a feature report to the device.  Per the HID
+specification, feature reports are always sent using the control endpoint.
+Set the first byte of the supplied buffer to the report number.  For devices
+which do not use numbered reports, set the first byte to 0. The report data
+begins in the second byte. Make sure to set len accordingly, to one more
+than the length of the report (to account for the report number).
+
+HIDIOCGFEATURE(len): Get a Feature Report
+This ioctl will request a feature report from the device using the control
+endpoint.  The first byte of the supplied buffer should be set to the report
+number of the requested report.  For devices which do not use numbered
+reports, set the first byte to 0.  The report will be returned starting at
+the first byte of the buffer (ie: the report number is not returned).
+
+Example
+---------
+The following code shows examples of read() write() and all the ioctls for
+hidraw. The code may be used by anyone for any purpose, and can serve as a
+starting point for developing applications using hidraw.
+
+---- Begin Code ----
+/*******************************
+ Hidraw test
+ (c) Alan Ott
+ May be used for any purpose.
+*******************************/
+
+/* Linux */
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/hidraw.h>
+
+/* Unix */
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+/* C */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+
+const char *bus_str(int bus);
+
+int main(int argc, char **argv)
+{
+	int fd;
+	
+	/* Open the Device with non-blocking reads. In real life,
+	   don't use a hard coded path; use libudev instead. */
+	fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK);
+	
+	if (fd > 0) {
+		int i, res, desc_size = 0;
+		char buf[256];
+		struct hidraw_report_descriptor rpt_desc;
+		struct hidraw_devinfo info;
+
+		memset(&rpt_desc, 0, sizeof(rpt_desc));
+		memset(&info, 0xff, sizeof(info));
+		memset(buf, 0x0, sizeof(buf));
+		
+		/* Get Report Descriptor Size */
+		res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size);
+		if (res < 0)
+			perror("HIDIOCGRDESCSIZE");
+		else {
+			printf("Report Descriptor Size: %d\n", desc_size);
+		}
+		
+		/* Get Report Descriptor */
+		rpt_desc.size = desc_size;
+		res = ioctl(fd, HIDIOCGRDESC, &rpt_desc);
+		if (res < 0)
+			perror("HIDIOCGRDESC");
+		else {
+			printf("Report Descriptor:\n");
+			for (i = 0; i < rpt_desc.size; i++) {
+				printf("%hhx ", rpt_desc.value[i]);
+			}
+			puts("\n");
+		}
+
+		/* Get Raw Name */
+		res = ioctl(fd, HIDIOCGRAWNAME(256), buf);
+		if (res < 0)
+			perror("HIDIOCGRAWNAME");
+		else {
+			printf("Raw Name: %s\n", buf);
+		}
+
+		/* Get Physical Location */
+		res = ioctl(fd, HIDIOCGRAWPHYS(256), buf);
+		if (res < 0)
+			perror("HIDIOCGRAWPHYS");
+		else {
+			printf("Raw Phys: %s\n", buf);
+		}
+
+		/* Get Raw Info */
+		res = ioctl(fd, HIDIOCGRAWINFO, &info);
+		if (res < 0)
+			perror("HIDIOCGRAWINFO");
+		else {
+			printf("Raw Info:\n");
+			printf("\tbustype: %d (%s)\n", info.bustype, bus_str(info.bustype));
+			printf("\tvendor: 0x%04hx\n", info.vendor);
+			printf("\tproduct: 0x%04hx\n", info.product);
+		}
+		
+		/* Set Feature */
+		buf[0] = 0x9; /* Report Number */
+		buf[1] = 0xff;
+		buf[2] = 0xff;
+		buf[3] = 0xff;
+		res = ioctl(fd, HIDIOCSFEATURE(4), buf);
+		if (res < 0)
+			perror("HIDIOCSFEATURE");
+		else {
+			printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
+		}
+
+		/* Get Feature */
+		buf[0] = 0x9; /* Report Number */
+		res = ioctl(fd, HIDIOCGFEATURE(256), buf);
+		if (res < 0)
+			perror("HIDIOCGFEATURE");
+		else {
+			printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
+			printf("Report data (not containing the report number): \n\t");
+			for (i = 0; i < res; i++) {
+				printf("%hhx ", buf[i]);
+			}
+			puts("\n");
+		}
+
+		/* Send a Report to the Device */
+		buf[0] = 0x1; /* Report Number */
+		buf[1] = 0x77;
+		res = write(fd, buf, 2);
+		if (res < 0) {
+			printf("Error: %d\n", errno);
+			perror("write");
+		}
+		else
+			printf("write() wrote %d bytes\n", res);
+	
+		/* Get a report from the device */
+		res = read(fd, buf, 16);
+		if (res < 0) {
+			perror("read");
+		}
+		else {
+			printf("read() read %d bytes:\n\t", res);
+			for (i = 0; i < res; i++) {
+				printf("%hhx ", buf[i]);
+			}
+			puts("\n");
+		}
+		close(fd);
+	}
+	else {
+		perror("Unable to open device");
+	}
+	return 0;
+}
+
+const char *
+bus_str(int bus)
+{
+	switch(bus) {
+	case BUS_USB:
+		return "USB";
+		break;
+	case BUS_HIL:
+		return "HIL";
+		break;
+	case BUS_BLUETOOTH:
+		return "Bluetooth";
+		break;
+	case BUS_VIRTUAL:
+		return "Virtual";
+		break;
+	default:
+		return "Other";
+		break;
+	}
+}
+---- End Code ----
+
+Document by:
+	Alan Ott <alan@...nal11.us>
-- 
1.7.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists