linux-kernel - Re: [ath5k-devel] [PATCH v2] ath5k: disable ASPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <AANLkTilyQB-q8Xf9Mu3F5SnKbRqbBuLjbdx8EcyCt_0v@mail.gmail.com>
Date:	Wed, 23 Jun 2010 09:28:57 -0700
From:	"Luis R. Rodriguez" <mcgrof@...il.com>
To:	Johannes Stezenbach <js@...21.net>
Cc:	Matthew Garrett <mjg59@...f.ucam.org>,
	Jussi Kivilinna <jussi.kivilinna@...et.fi>,
	Maxim Levitsky <maximlevitsky@...il.com>,
	David Quan <David.Quan@...eros.com>,
	Bob Copeland <me@...copeland.com>,
	"Luis R. Rodriguez" <mcgrof@...badil.infradead.org>,
	ath5k-devel@...ema.h4ckr.net, linux-wireless@...r.kernel.org,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Jonathan May <jonathan.may@...eros.com>,
	Tim Gardner <tim.gardner@...onical.com>
Subject: Re: [ath5k-devel] [PATCH v2] ath5k: disable ASPM

On Wed, Jun 23, 2010 at 7:39 AM, Johannes Stezenbach <js@...21.net> wrote:
> On Tue, Jun 22, 2010 at 12:38:03PM -0700, Luis R. Rodriguez wrote:
>> On Tue, Jun 22, 2010 at 12:37 PM, Luis R. Rodriguez <mcgrof@...il.com> wrote:
>> > On Tue, Jun 22, 2010 at 12:31 PM, Johannes Stezenbach <js@...21.net> wrote:
>> >>
>> >> Does CONFIG_PCIEASPM provide a way for the user to modifiy
>> >> the settings at runtime?
>> >
>> > You can tune ASPM settings at runtime, regardless of CONFIG_PCIEASPM. See:
>> >
>> > http://kernel.org/pub/linux/kernel/people/mcgrof/aspm/enable-aspm
>> > http://wireless.kernel.org/en/users/Documentation/ASPM
>> >
>> >> I have a Samsung N130 netbook which has a BIOS setting
>> >> called "CPU Power Saving Mode".  When enabled it activates
>> >> ASPM L1 and L0s for the ethernet chip (Realtek RTL8102e, 100Mbit)
>> >> and the PCIE bridge (with the BIOS setting off it's just L1).
>> >> The result is that the ethernet througput is reduced to 25Mbit/s.
>> >
>> > L0s is not going to buy you much gains, getting at least L1 will
>> > however. L0s is just a further enhancement. I recommend you test by
>> > enabling L1 and L0s, check how longer your battery lasts and then test
>> > again with just L1. Then test without both L1 and L0s.
>>
>> So defaults should always be sane and you should not have to play with
>> this stuff, unless you're a hacker, or are testing something for
>> development purposes. Tweaking ASPM settings is not something a user
>> should have to worry about. Period.
>
> OK, let me put the question another way:
>
> If enabling ASPM comes with a performance penalty (which is not unexpected,
> there is usually a tradeoff between performance and power consumption),
> do you think a boot time option (pcie_aspm=) or compile time option
> (CONFIG_PCIEASPM) is the right user interface?
>
>
> But meanwhile I found that CONFIG_PCIEASPM has a runtime
> interface, /sys/module/pcie_aspm/parameters/policy.
> http://lwn.net/Articles/266585/
>
> I have not tested it on my N130 yet.

Same thing, its to be used by developers not users, damn it we should
just remove this crap.

  Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/