Message-ID: <20100624180726.GK2373@linux.vnet.ibm.com>
Date:	Thu, 24 Jun 2010 11:07:26 -0700
From:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To:	Oleg Nesterov <oleg@...hat.com>
Cc:	Andrew Morton <akpm@...ux-foundation.org>,
	Don Zickus <dzickus@...hat.com>,
	Frederic Weisbecker <fweisbec@...il.com>,
	Ingo Molnar <mingo@...e.hu>,
	Jerome Marchand <jmarchan@...hat.com>,
	Mandeep Singh Baines <msb@...gle.com>,
	Roland McGrath <roland@...hat.com>,
	linux-kernel@...r.kernel.org, stable@...nel.org,
	"Eric W. Biederman" <ebiederm@...ssion.com>
Subject: Re: while_each_thread() under rcu_read_lock() is broken?

On Wed, Jun 23, 2010 at 05:24:21PM +0200, Oleg Nesterov wrote:
> On 06/22, Paul E. McKenney wrote:
> >
> > On Tue, Jun 22, 2010 at 11:23:57PM +0200, Oleg Nesterov wrote:
> > > On 06/21, Paul E. McKenney wrote:
> > > >
> > > > Yeah, would be good to avoid this.  Not sure it can be avoided, though.
> > >
> > > Why? I think next_thread_careful() from
> > > 	http://marc.info/?l=linux-kernel&m=127714242731448
> > > should work.
> > >
> > > If the caller holds tasklist or siglock, this change has no effect.
> > >
> > > If the caller does while_each_thread() under rcu_read_lock(), then
> > > it is OK to break the loop earlier than we do now. The lockless
> > > while_each_thread() works in a "best effort" manner anyway, if it
> > > races with exit_group() or exec() it can miss some/most/all sub-threads
> > > (including the new leader) with or without this change.
> > >
> > > Yes, zap_threads() needs additional fixes. But I think it is better
> > > to complicate a couple of lockless callers (or just change them
> > > to take tasklist) which must not miss an "interesting" thread.
> >
> > Is it the case that creating a new group leader from an existing group
> > always destroys the old group?  It certainly is the case for exec().
> 
> Yes. And only exec() can change the leader.
> 
> > Anyway, if creating a new thread group implies destroying the old one,
> > and if the thread group leader cannot be concurrently creating a new
> > thread group and traversing the old one, then yes, I do believe your
> > code at http://marc.info/?l=linux-kernel&m=127714242731448 will work.
> >
> > Assuming that the call to next_thread_careful(t) in the definition of
> > while_each_thread() is replaced with next_thread_careful(g,t).
> 
> Great.
> 
> > And give or take memory barriers.
> >
> > The implied memory barrier mentioned in the comment in your example code
> > is the spin_lock_irqsave() and spin_unlock_irqrestore()
> 
> Argh. No, no, no. I meant unlock + lock, not lock + unlock. But when
> I look at __change_pid() now I do not see the 2nd lock() after
> unlock(pidmap_lock). I was wrong, thanks.
> 
> And, even if I was correct it is not nice to rely on the internals
> of detach_pid(). If we use next_thread_careful(), __unhash_process()
> needs wmb.
> 
> Thanks!
> 
> > > And. Whatever we do with de_thread(), this can't fix the lockless
> > > while_each_thread(not_a_group_leader, t). I do not know if there is
> > > any user which does this though.
> > > fastpath_timer_check()->thread_group_cputimer() does this, but this
> > > is wrong and we already have the patch which removes it.
> >
> > Indeed.  Suppose that the starting task is the one immediately preceding
> > the task group leader.  You get a pointer to the task in question
> > and traverse to the next task (the task group leader), during which
> > time the thread group leader does exec() and maybe a pthread_create()
> > or two.  Oops!  You are now now traversing the wrong thread group!
> 
> Yes, but there is another more simple and much more feasible race.
> while_each_thread(non_leader, t) will loop forever if non_leader
> simply exits and passes __unhash_process(). After that next_thread(t)
> can never return non_leader.
> 
> > There are ways of fixing this, but all the ones I know of require more
> > fields in the task structure,
> 
> Just in case, I hope that next_thread_careful() handles this case too.
> 
> > so best if we don't need to start somewhere
> > other than a group leader.
> 
> (I assume, you mean the lockless case)
> 
> I am not sure. Because it is not trivial to enforce this rule even if
> we add a fat comment. Please look at check_hung_uninterruptible_tasks().
> It does do_each_thread/while_each_thread and thus it always starts at
> the leader. But in fact this is not true due to rcu_lock_break().
> 
> Or proc_task_readdir(). It finds the leader, does get_task_struct(leader)
> and drops rcu lock. After that first_tid() takes rcu_read_lock() again
> and does the open coded while_each_thread(). At first glance this case
> looks fine, "for (pos = leader; nr > 0; --nr)" can't loop forever.
> But in fact it is not:
> 
> 	- proc_task_readdir() finds the leader L, does get_task_struct()
> 	  and drops rcu lock.
> 
> 	  Suppose that filp->f_pos >= 2.
>           Suppose also that the previous tid cached in filp->f_version
>           is no longer valid.
> 
> 	  The caller is preempted.
> 
> 	- a sub-thread T does exec, and does release_task(L).
> 
> 	  But L->thread_group->next == T, so far everything is good
> 
> 	- T spawns other sub-threads (so that get_nr_threads() > nr)
> 	  and exits.
> 
> 	- grace period passes, T's task_struct is freed/unmapped/reused
> 
> 	- proc_task_readdir() resumes and calls first_tid(L).
> 
> 	  next_thread(L) returns T == nowhere
> 
> It is very possible that I missed something here, my only point is
> that I think it would be safer to assume nothing about the leaderness.

It is past time that I list out my assumptions more carefully.  ;-)

First, what "bad things" can happen to a reader scanning a thread
group?

1.	The thread-group leader might do exec(), destroying the old
	list and forming a new one.  In this case, we want any readers
	to stop scanning.

2.	Some other thread might do exec(), destroying the old list and
	forming a new one.  In this case, we also want any readers to
	stop scanning.

3.	The thread-group leader might do pthread_exit(), removing itself
	from the thread group -- and might do so while the hapless reader
	is referencing that thread.

	But isn't this prohibited?  Or is it really legal to do a
	pthread_create() to create a new thread and then have the
	parent thread call pthread_exit()?  Not something I would
	consider trying in my own code!  Well, I might, just to
	be perverse, but...  ;-)

4.	Some other thread might do pthread_exit(), removing itself
	from the thread group, and again might do so while the hapless
	reader is referencing that thread.  In this case, we want
	the hapless reader to continue scanning the remainder of the
	thread group.

5.	The thread-group leader might do exit(), destroying the old
	list without forming a new one.  In this case, we want any
	readers to stop scanning.

6.	Some other thread might do exit(), destroying the old list
	without forming a new one.  In this case, we also want any
	readers to stop scanning.

Anything else I might be missing?

And proc_task_readdir() does look quite interesting, and I don't claim
to understand it yet.

							Thanx, Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists