| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201006250100.14166.rjw@sisk.pl>
Date: Fri, 25 Jun 2010 01:00:13 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Alan Stern <stern@...land.harvard.edu>
Cc: Florian Mickler <florian@...kler.org>,
"Linux-pm mailing list" <linux-pm@...ts.linux-foundation.org>,
Matthew Garrett <mjg59@...f.ucam.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Arve Hjønnevåg <arve@...roid.com>,
Neil Brown <neilb@...e.de>, mark gross <640e9920@...il.com>
Subject: [update 3] Re: [RFC][PATCH] PM: Avoid losing wakeup events during suspend
On Thursday, June 24, 2010, Alan Stern wrote:
> On Thu, 24 Jun 2010, Rafael J. Wysocki wrote:
>
> > Ah, one piece is missing. Namely, the waiting /sys/power/wakeup_count reader
> > needs to be woken up when events_in_progress goes down to zero.
>
> It also needs to abort immediately if a signal is received.
Right.
So, there it goes.
I decided not to play with memory allocations at this point, because I really
don't expect pm_wakeup_event() to be heavily used initially. If there are more
users and it's called more frequently, we can always switch to using a separate
slab cache.
Hopefully, I haven't overlooked anything vitally important this time.
Please tell me what you think.
Rafael
---
drivers/base/power/Makefile | 2
drivers/base/power/main.c | 1
drivers/base/power/power.h | 3
drivers/base/power/sysfs.c | 9 ++
drivers/base/power/wakeup.c | 143 ++++++++++++++++++++++++++++++++++++++++
drivers/pci/pci-acpi.c | 1
drivers/pci/pci.c | 10 ++
drivers/pci/pci.h | 3
drivers/pci/pcie/pme/pcie_pme.c | 5 +
include/linux/pm.h | 10 ++
kernel/power/hibernate.c | 22 ++++--
kernel/power/main.c | 26 +++++++
kernel/power/power.h | 9 ++
kernel/power/suspend.c | 4 -
14 files changed, 237 insertions(+), 11 deletions(-)
Index: linux-2.6/kernel/power/main.c
===================================================================
--- linux-2.6.orig/kernel/power/main.c
+++ linux-2.6/kernel/power/main.c
@@ -204,6 +204,30 @@ static ssize_t state_store(struct kobjec
power_attr(state);
+static ssize_t wakeup_count_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ unsigned long val;
+
+ return pm_get_wakeup_count(&val) ? sprintf(buf, "%lu\n", val) : -EINTR;
+}
+
+static ssize_t wakeup_count_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned long val;
+
+ if (sscanf(buf, "%lu", &val) == 1) {
+ if (pm_save_wakeup_count(val))
+ return n;
+ }
+ return -EINVAL;
+}
+
+power_attr(wakeup_count);
+
#ifdef CONFIG_PM_TRACE
int pm_trace_enabled;
@@ -236,6 +260,7 @@ static struct attribute * g[] = {
#endif
#ifdef CONFIG_PM_SLEEP
&pm_async_attr.attr,
+ &wakeup_count_attr.attr,
#ifdef CONFIG_PM_DEBUG
&pm_test_attr.attr,
#endif
@@ -266,6 +291,7 @@ static int __init pm_init(void)
int error = pm_start_workqueue();
if (error)
return error;
+ pm_wakeup_events_init();
power_kobj = kobject_create_and_add("power", NULL);
if (!power_kobj)
return -ENOMEM;
Index: linux-2.6/drivers/base/power/wakeup.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/base/power/wakeup.c
@@ -0,0 +1,143 @@
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/capability.h>
+#include <linux/pm.h>
+
+bool events_check_enabled;
+
+static unsigned long event_count;
+static unsigned long saved_event_count;
+static unsigned long events_in_progress;
+static spinlock_t events_lock;
+static DECLARE_WAIT_QUEUE_HEAD(events_wait_queue);
+
+void pm_wakeup_events_init(void)
+{
+ spin_lock_init(&events_lock);
+}
+
+void pm_stay_awake(struct device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (dev)
+ dev->power.wakeup_count++;
+
+ events_in_progress++;
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+
+void pm_relax(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (events_in_progress) {
+ event_count++;
+ if (!--events_in_progress)
+ wake_up_all(&events_wait_queue);
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+
+static void pm_wakeup_work_fn(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+
+ pm_relax();
+ kfree(dwork);
+}
+
+void pm_wakeup_event(struct device *dev, unsigned int msec)
+{
+ unsigned long flags;
+ struct delayed_work *dwork;
+
+ dwork = msec ? kzalloc(sizeof(*dwork), GFP_ATOMIC) : NULL;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (dev)
+ dev->power.wakeup_count++;
+
+ if (dwork) {
+ INIT_DELAYED_WORK(dwork, pm_wakeup_work_fn);
+ schedule_delayed_work(dwork, msecs_to_jiffies(msec));
+
+ events_in_progress++;
+ } else {
+ event_count++;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+
+bool pm_check_wakeup_events(void)
+{
+ unsigned long flags;
+ bool ret = true;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (events_check_enabled) {
+ ret = (event_count == saved_event_count) && !events_in_progress;
+ events_check_enabled = ret;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+ return ret;
+}
+
+unsigned long pm_dev_wakeup_count(struct device *dev)
+{
+ unsigned long flags;
+ unsigned long count;
+
+ spin_lock_irqsave(&events_lock, flags);
+ count = dev->power.wakeup_count;
+ spin_unlock_irqrestore(&events_lock, flags);
+ return count;
+}
+
+bool pm_get_wakeup_count(unsigned long *count)
+{
+ bool ret;
+
+ spin_lock_irq(&events_lock);
+ if (capable(CAP_SYS_ADMIN))
+ events_check_enabled = false;
+
+ if (events_in_progress) {
+ DEFINE_WAIT(wait);
+
+ do {
+ prepare_to_wait(&events_wait_queue, &wait,
+ TASK_INTERRUPTIBLE);
+ if (!events_in_progress)
+ break;
+ spin_unlock_irq(&events_lock);
+
+ schedule();
+
+ spin_lock_irq(&events_lock);
+ } while (!signal_pending(current));
+ finish_wait(&events_wait_queue, &wait);
+ }
+ *count = event_count;
+ ret = !events_in_progress;
+ spin_unlock_irq(&events_lock);
+ return ret;
+}
+
+bool pm_save_wakeup_count(unsigned long count)
+{
+ bool ret = false;
+
+ spin_lock_irq(&events_lock);
+ if (count == event_count && !events_in_progress) {
+ saved_event_count = count;
+ events_check_enabled = true;
+ ret = true;
+ }
+ spin_unlock_irq(&events_lock);
+ return ret;
+}
Index: linux-2.6/include/linux/pm.h
===================================================================
--- linux-2.6.orig/include/linux/pm.h
+++ linux-2.6/include/linux/pm.h
@@ -457,6 +457,7 @@ struct dev_pm_info {
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
struct completion completion;
+ unsigned long wakeup_count;
#endif
#ifdef CONFIG_PM_RUNTIME
struct timer_list suspend_timer;
@@ -552,6 +553,11 @@ extern void __suspend_report_result(cons
} while (0)
extern void device_pm_wait_for_dev(struct device *sub, struct device *dev);
+
+/* drivers/base/power/wakeup.c */
+extern void pm_wakeup_event(struct device *dev, unsigned int msec);
+extern void pm_stay_awake(struct device *dev);
+extern void pm_relax(void);
#else /* !CONFIG_PM_SLEEP */
#define device_pm_lock() do {} while (0)
@@ -565,6 +571,10 @@ static inline int dpm_suspend_start(pm_m
#define suspend_report_result(fn, ret) do {} while (0)
static inline void device_pm_wait_for_dev(struct device *a, struct device *b) {}
+
+static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {}
+static inline void pm_stay_awake(struct device *dev) {}
+static inline void pm_relax(void) {}
#endif /* !CONFIG_PM_SLEEP */
/* How to reorder dpm_list after device_move() */
Index: linux-2.6/drivers/base/power/Makefile
===================================================================
--- linux-2.6.orig/drivers/base/power/Makefile
+++ linux-2.6/drivers/base/power/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_PM) += sysfs.o
-obj-$(CONFIG_PM_SLEEP) += main.o
+obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o
obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_OPS) += generic_ops.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -59,6 +59,7 @@ void device_pm_init(struct device *dev)
{
dev->power.status = DPM_ON;
init_completion(&dev->power.completion);
+ dev->power.wakeup_count = 0;
pm_runtime_init(dev);
}
Index: linux-2.6/kernel/power/power.h
===================================================================
--- linux-2.6.orig/kernel/power/power.h
+++ linux-2.6/kernel/power/power.h
@@ -184,6 +184,15 @@ static inline void suspend_test_finish(c
#ifdef CONFIG_PM_SLEEP
/* kernel/power/main.c */
extern int pm_notifier_call_chain(unsigned long val);
+
+/* drivers/base/power/wakeup.c */
+extern bool events_check_enabled;
+
+extern void pm_wakeup_events_init(void);
+extern bool pm_check_wakeup_events(void);
+extern bool pm_check_wakeup_events_final(void);
+extern bool pm_get_wakeup_count(unsigned long *count);
+extern bool pm_save_wakeup_count(unsigned long count);
#endif
#ifdef CONFIG_HIGHMEM
Index: linux-2.6/kernel/power/suspend.c
===================================================================
--- linux-2.6.orig/kernel/power/suspend.c
+++ linux-2.6/kernel/power/suspend.c
@@ -172,8 +172,10 @@ static int suspend_enter(suspend_state_t
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
- if (!suspend_test(TEST_CORE))
+ if (!suspend_test(TEST_CORE) && pm_check_wakeup_events()) {
error = suspend_ops->enter(state);
+ events_check_enabled = false;
+ }
sysdev_resume();
}
Index: linux-2.6/kernel/power/hibernate.c
===================================================================
--- linux-2.6.orig/kernel/power/hibernate.c
+++ linux-2.6/kernel/power/hibernate.c
@@ -277,7 +277,7 @@ static int create_image(int platform_mod
goto Enable_irqs;
}
- if (hibernation_test(TEST_CORE))
+ if (hibernation_test(TEST_CORE) || !pm_check_wakeup_events())
goto Power_up;
in_suspend = 1;
@@ -288,8 +288,10 @@ static int create_image(int platform_mod
error);
/* Restore control flow magically appears here */
restore_processor_state();
- if (!in_suspend)
+ if (!in_suspend) {
+ events_check_enabled = false;
platform_leave(platform_mode);
+ }
Power_up:
sysdev_resume();
@@ -511,18 +513,24 @@ int hibernation_platform_enter(void)
local_irq_disable();
sysdev_suspend(PMSG_HIBERNATE);
+ if (!pm_check_wakeup_events()) {
+ error = -EAGAIN;
+ goto Power_up;
+ }
+
hibernation_ops->enter();
/* We should never get here */
while (1);
- /*
- * We don't need to reenable the nonboot CPUs or resume consoles, since
- * the system is going to be halted anyway.
- */
+ Power_up:
+ sysdev_resume();
+ local_irq_enable();
+ enable_nonboot_cpus();
+
Platform_finish:
hibernation_ops->finish();
- dpm_suspend_noirq(PMSG_RESTORE);
+ dpm_resume_noirq(PMSG_RESTORE);
Resume_devices:
entering_platform_hibernation = false;
Index: linux-2.6/drivers/pci/pci-acpi.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci-acpi.c
+++ linux-2.6/drivers/pci/pci-acpi.c
@@ -48,6 +48,7 @@ static void pci_acpi_wake_dev(acpi_handl
if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
pci_check_pme_status(pci_dev);
pm_runtime_resume(&pci_dev->dev);
+ pci_wakeup_event(pci_dev);
if (pci_dev->subordinate)
pci_pme_wakeup_bus(pci_dev->subordinate);
}
Index: linux-2.6/drivers/pci/pcie/pme/pcie_pme.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/pme/pcie_pme.c
+++ linux-2.6/drivers/pci/pcie/pme/pcie_pme.c
@@ -154,6 +154,7 @@ static bool pcie_pme_walk_bus(struct pci
/* Skip PCIe devices in case we started from a root port. */
if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
pm_request_resume(&dev->dev);
+ pci_wakeup_event(dev);
ret = true;
}
@@ -254,8 +255,10 @@ static void pcie_pme_handle_request(stru
if (found) {
/* The device is there, but we have to check its PME status. */
found = pci_check_pme_status(dev);
- if (found)
+ if (found) {
pm_request_resume(&dev->dev);
+ pci_wakeup_event(dev);
+ }
pci_dev_put(dev);
} else if (devfn) {
/*
Index: linux-2.6/drivers/base/power/power.h
===================================================================
--- linux-2.6.orig/drivers/base/power/power.h
+++ linux-2.6/drivers/base/power/power.h
@@ -30,6 +30,9 @@ extern void device_pm_move_before(struct
extern void device_pm_move_after(struct device *, struct device *);
extern void device_pm_move_last(struct device *);
+/* drivers/base/power/wakeup.c */
+extern unsigned long pm_dev_wakeup_count(struct device *dev);
+
#else /* !CONFIG_PM_SLEEP */
static inline void device_pm_init(struct device *dev)
Index: linux-2.6/drivers/base/power/sysfs.c
===================================================================
--- linux-2.6.orig/drivers/base/power/sysfs.c
+++ linux-2.6/drivers/base/power/sysfs.c
@@ -144,6 +144,14 @@ wake_store(struct device * dev, struct d
static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+static ssize_t wakeup_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", pm_dev_wakeup_count(dev));
+}
+
+static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
+
#ifdef CONFIG_PM_ADVANCED_DEBUG
#ifdef CONFIG_PM_RUNTIME
@@ -230,6 +238,7 @@ static struct attribute * power_attrs[]
&dev_attr_control.attr,
#endif
&dev_attr_wakeup.attr,
+ &dev_attr_wakeup_count.attr,
#ifdef CONFIG_PM_ADVANCED_DEBUG
&dev_attr_async.attr,
#ifdef CONFIG_PM_RUNTIME
Index: linux-2.6/drivers/pci/pci.h
===================================================================
--- linux-2.6.orig/drivers/pci/pci.h
+++ linux-2.6/drivers/pci/pci.h
@@ -6,6 +6,8 @@
#define PCI_CFG_SPACE_SIZE 256
#define PCI_CFG_SPACE_EXP_SIZE 4096
+#define PCI_WAKEUP_COOLDOWN 100
+
/* Functions internal to the PCI core code */
extern int pci_uevent(struct device *dev, struct kobj_uevent_env *env);
@@ -56,6 +58,7 @@ extern void pci_update_current_state(str
extern void pci_disable_enabled_device(struct pci_dev *dev);
extern bool pci_check_pme_status(struct pci_dev *dev);
extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern void pci_wakeup_event(struct pci_dev *dev);
extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
extern void pci_pme_wakeup_bus(struct pci_bus *bus);
extern void pci_pm_init(struct pci_dev *dev);
Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -1275,6 +1275,12 @@ bool pci_check_pme_status(struct pci_dev
return ret;
}
+void pci_wakeup_event(struct pci_dev *dev)
+{
+ if (device_may_wakeup(&dev->dev))
+ pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN);
+}
+
/**
* pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
* @dev: Device to handle.
@@ -1285,8 +1291,10 @@ bool pci_check_pme_status(struct pci_dev
*/
static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
{
- if (pci_check_pme_status(dev))
+ if (pci_check_pme_status(dev)) {
pm_request_resume(&dev->dev);
+ pci_wakeup_event(dev);
+ }
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists