| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 Jun 2010 17:06:12 +0100
From: Jonathan Cameron <kernel@...23.retrosnub.co.uk>
To: Guenter Roeck <guenter.roeck@...csson.com>
CC: Jean Delvare <khali@...ux-fr.org>,
Hans de Goede <hdegoede@...hat.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-kernel@...r.kernel.org, lm-sensors@...sensors.org
Subject: Re: [lm-sensors] [PATCH v4 1/3] hwmon: Driver for SMM665 Six-Channel
Active DC Output Controller/Monitor
On 06/25/10 15:40, Guenter Roeck wrote:
> This driver adds support for the monitoring features of the Summit
> Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.
>
One out of date comment given you have now added the api you say
might be added in future ;)
Otherwise looks good to me,
> Signed-off-by: Guenter Roeck <guenter.roeck@...csson.com>
Acked-by: Jonathan Cameron <jic23@....ac.uk>
> ---
> drivers/hwmon/Kconfig | 15 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/smm665.c | 748 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 764 insertions(+), 0 deletions(-)
> create mode 100644 drivers/hwmon/smm665.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e19cf8e..c45c17e 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -739,6 +739,21 @@ config SENSORS_SIS5595
> This driver can also be built as a module. If so, the module
> will be called sis5595.
>
> +config SENSORS_SMM665
> + tristate "Summit Microelectronics SMM665"
> + depends on I2C && EXPERIMENTAL
> + default n
> + help
> + If you say yes here you get support for the hardware monitoring
> + features of the Summit Microelectronics SMM665/SMM665B Six-Channel
> + Active DC Output Controller / Monitor.
> +
> + Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
> + Support for those chips is untested.
> +
> + This driver can also be built as a module. If so, the module will
> + be called smm665.
> +
> config SENSORS_DME1737
> tristate "SMSC DME1737, SCH311x and compatibles"
> depends on I2C && EXPERIMENTAL
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 2138ceb..55b0940 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
> obj-$(CONFIG_SENSORS_SHT15) += sht15.o
> obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
> +obj-$(CONFIG_SENSORS_SMM665) += smm665.o
> obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
> obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
> obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
> diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c
> new file mode 100644
> index 0000000..760afba
> --- /dev/null
> +++ b/drivers/hwmon/smm665.c
> @@ -0,0 +1,748 @@
> +/*
> + * Driver for SMM665 Power Controller / Monitor
> + *
> + * Copyright (C) 2010 Ericsson AB.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This driver should also work for SMM465, SMM764, and SMM766, but is untested
> + * for those chips. Only monitoring functionality is implemented.
> + *
> + * Datasheets:
> + * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
> + * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/delay.h>
> +
> +/* Internal reference voltage (VREF, x 1000 */
> +#define SMM665_VREF_ADC_X1000 1250
> +
> +/* module parameters */
> +static int vref = SMM665_VREF_ADC_X1000;
> +module_param(vref, int, 0);
> +MODULE_PARM_DESC(vref, "Reference voltage in mV");
> +
> +enum chips { smm465, smm665, smm665c, smm764, smm766 };
> +
> +/*
> + * ADC channel addresses
> + */
> +#define SMM665_MISC16_ADC_DATA_A 0x00
> +#define SMM665_MISC16_ADC_DATA_B 0x01
> +#define SMM665_MISC16_ADC_DATA_C 0x02
> +#define SMM665_MISC16_ADC_DATA_D 0x03
> +#define SMM665_MISC16_ADC_DATA_E 0x04
> +#define SMM665_MISC16_ADC_DATA_F 0x05
> +#define SMM665_MISC16_ADC_DATA_VDD 0x06
> +#define SMM665_MISC16_ADC_DATA_12V 0x07
> +#define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08
> +#define SMM665_MISC16_ADC_DATA_AIN1 0x09
> +#define SMM665_MISC16_ADC_DATA_AIN2 0x0a
> +
> +/*
> + * Command registers
> + */
> +#define SMM665_MISC8_CMD_STS 0x80
> +#define SMM665_MISC8_STATUS1 0x81
> +#define SMM665_MISC8_STATUSS2 0x82
> +#define SMM665_MISC8_IO_POLARITY 0x83
> +#define SMM665_MISC8_PUP_POLARITY 0x84
> +#define SMM665_MISC8_ADOC_STATUS1 0x85
> +#define SMM665_MISC8_ADOC_STATUS2 0x86
> +#define SMM665_MISC8_WRITE_PROT 0x87
> +#define SMM665_MISC8_STS_TRACK 0x88
> +
> +/*
> + * Configuration registers and register groups
> + */
> +#define SMM665_ADOC_ENABLE 0x0d
> +#define SMM665_LIMIT_BASE 0x80 /* First limit register */
> +
> +/*
> + * Limit register bit masks
> + */
> +#define SMM665_TRIGGER_RST 0x8000
> +#define SMM665_TRIGGER_HEALTHY 0x4000
> +#define SMM665_TRIGGER_POWEROFF 0x2000
> +#define SMM665_TRIGGER_SHUTDOWN 0x1000
> +#define SMM665_ADC_MASK 0x03ff
> +
> +#define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \
> + | SMM665_TRIGGER_POWEROFF \
> + | SMM665_TRIGGER_SHUTDOWN))
> +/*
> + * Fault register bit definitions
> + * Values are merged from status registers 1/2,
> + * with status register 1 providing the upper 8 bits.
> + */
> +#define SMM665_FAULT_A 0x0001
> +#define SMM665_FAULT_B 0x0002
> +#define SMM665_FAULT_C 0x0004
> +#define SMM665_FAULT_D 0x0008
> +#define SMM665_FAULT_E 0x0010
> +#define SMM665_FAULT_F 0x0020
> +#define SMM665_FAULT_VDD 0x0040
> +#define SMM665_FAULT_12V 0x0080
> +#define SMM665_FAULT_TEMP 0x0100
> +#define SMM665_FAULT_AIN1 0x0200
> +#define SMM665_FAULT_AIN2 0x0400
> +
> +/*
> + * I2C Register addresses
> + *
> + * The configuration register needs to be the configured base register.
> + * The command/status register address is derived from it.
> + */
> +#define SMM665_REGMASK 0x78
> +#define SMM665_CMDREG_BASE 0x48
> +#define SMM665_CONFREG_BASE 0x50
> +
> +/*
> + * Equations given by chip manufacturer to calculate voltage/temperature values
> + * vref = Reference voltage on VREF_ADC pin (module parameter)
> + * adc = 10bit ADC value read back from registers
> + */
> +
> +/* Voltage A-F and VDD */
> +#define SMM665_VMON_ADC_TO_VOLTS(adc) ((adc) * vref / 256)
> +
> +/* Voltage 12VIN */
> +#define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256)
> +
> +/* Voltage AIN1, AIN2 */
> +#define SMM665_AIN_ADC_TO_VOLTS(adc) ((adc) * vref / 512)
> +
> +/* Temp Sensor */
> +#define SMM665_TEMP_ADC_TO_CELSIUS(adc) ((adc) <= 511) ? \
> + ((int)(adc) * 1000 / 4) : \
> + (((int)(adc) - 0x400) * 1000 / 4)
> +
> +#define SMM665_NUM_ADC 11
> +
> +/*
> + * Chip dependent ADC conversion time, in uS
> + */
> +#define SMM665_ADC_WAIT_SMM665 70
> +#define SMM665_ADC_WAIT_SMM766 185
> +
> +struct smm665_data {
> + enum chips type;
> + int conversion_time; /* ADC conversion time */
> + struct device *hwmon_dev;
> + struct mutex update_lock;
> + bool valid;
> + unsigned long last_updated; /* in jiffies */
> + u16 adc[SMM665_NUM_ADC]; /* adc values (raw) */
> + u16 faults; /* fault status */
> + /* The following values are in mV */
> + int critical_min_limit[SMM665_NUM_ADC];
> + int alarm_min_limit[SMM665_NUM_ADC];
> + int critical_max_limit[SMM665_NUM_ADC];
> + int alarm_max_limit[SMM665_NUM_ADC];
> + struct i2c_client *cmdreg;
> +};
> +
> +/*
> + * smm665_read16()
> + *
> + * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>.
> + */
> +static int smm665_read16(struct i2c_client *client, int reg)
> +{
> + int rv, val;
> +
> + rv = i2c_smbus_read_byte_data(client, reg);
> + if (rv < 0)
> + return rv;
> + val = rv << 8;
> + rv = i2c_smbus_read_byte_data(client, reg + 1);
> + if (rv < 0)
> + return rv;
> + val |= rv;
> + return val;
> +}
> +
> +/*
> + * Read adc value.
> + */
> +static int smm665_read_adc(struct smm665_data *data, int adc)
> +{
> + struct i2c_client *client = data->cmdreg;
> + int rv;
> + int radc;
> +
> + /*
> + * Algorithm for reading ADC, per SMM665 datasheet
> + *
> + * {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]}
> + * [wait conversion time]
> + * {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]}
> + *
> + * To implement the first part of this exchange,
> + * do a full read transaction and expect a failure/Nack.
> + * This sets up the address pointer on the SMM665
> + * and starts the ADC conversion.
> + * Then do a two-byte read transaction.
> + */
> + rv = i2c_smbus_read_byte_data(client, adc << 3);
> + if (rv != -ENXIO) {
> + /*
> + * We expect ENXIO to reflect NACK
> + * (per Documentation/i2c/fault-codes).
> + * Everything else is an error.
> + */
> + dev_dbg(&client->dev,
> + "Unexpected return code %d when setting ADC index", rv);
> + return (rv < 0) ? rv : -EIO;
> + }
> +
> + udelay(data->conversion_time);
> +
> + /*
> + * Now read two bytes.
> + *
> + * Neither i2c_smbus_read_byte() nor
> + * i2c_smbus_read_block_data() worked here,
> + * so use i2c_smbus_read_word_data() instead.
> + * We could also try to use i2c_master_recv(),
> + * but that is not always supported.
> + */
> + rv = i2c_smbus_read_word_data(client, 0);
> + if (rv < 0) {
> + dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
> + return -1;
> + }
> + /*
> + * Validate/verify readback adc channel (in bit 11..14).
> + * High byte is in lower 8 bit of rv, so only shift by 3.
> + */
> + radc = (rv >> 3) & 0x0f;
> + if (radc != adc) {
> + dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
> + adc, radc);
> + return -EIO;
> + }
> + /*
> + * Chip replies with H/L, while SMBus expects L/H.
> + * Thus, byte order is reversed, and we have to swap
> + * the result.
> + */
> + rv = swab16(rv) & SMM665_ADC_MASK;
> +
> + return rv;
> +}
> +
> +static struct smm665_data *smm665_update_device(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct smm665_data *data = i2c_get_clientdata(client);
> + struct smm665_data *ret = data;
> +
> + mutex_lock(&data->update_lock);
> +
> + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
> + int i, val;
> +
> + /*
> + * read status registers
> + */
> + val = smm665_read16(client, SMM665_MISC8_STATUS1);
> + if (unlikely(val < 0)) {
> + ret = ERR_PTR(val);
> + goto abort;
> + }
> + data->faults = val;
> +
> + /* Read adc registers */
> + for (i = 0; i < SMM665_NUM_ADC; i++) {
> + val = smm665_read_adc(data, i);
> + if (unlikely(val < 0)) {
> + ret = ERR_PTR(val);
> + goto abort;
> + }
> + data->adc[i] = val;
> + }
> + data->last_updated = jiffies;
> + data->valid = 1;
> + }
> +abort:
> + mutex_unlock(&data->update_lock);
> + return ret;
> +}
> +
> +/* Return converted value from given adc */
> +static int smm665_convert(u16 adcval, int index)
> +{
> + int val = 0;
> +
> + switch (index) {
> + case SMM665_MISC16_ADC_DATA_12V:
> + val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
> + break;
> +
> + case SMM665_MISC16_ADC_DATA_VDD:
> + case SMM665_MISC16_ADC_DATA_A:
> + case SMM665_MISC16_ADC_DATA_B:
> + case SMM665_MISC16_ADC_DATA_C:
> + case SMM665_MISC16_ADC_DATA_D:
> + case SMM665_MISC16_ADC_DATA_E:
> + case SMM665_MISC16_ADC_DATA_F:
> + val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
> + break;
> +
> + case SMM665_MISC16_ADC_DATA_AIN1:
> + case SMM665_MISC16_ADC_DATA_AIN2:
> + val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
> + break;
> +
> + case SMM665_MISC16_ADC_DATA_INT_TEMP:
> + val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK);
> + break;
> +
> + default:
> + /* If we get here, the developer messed up */
> + WARN_ON_ONCE(1);
> + break;
> + }
> +
> + return val;
> +}
> +
> +static int smm665_get_min(struct device *dev, int index)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct smm665_data *data = i2c_get_clientdata(client);
> +
> + return data->alarm_min_limit[index];
> +}
> +
> +static int smm665_get_max(struct device *dev, int index)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct smm665_data *data = i2c_get_clientdata(client);
> +
> + return data->alarm_max_limit[index];
> +}
> +
> +static int smm665_get_lcrit(struct device *dev, int index)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct smm665_data *data = i2c_get_clientdata(client);
> +
> + return data->critical_min_limit[index];
> +}
> +
> +static int smm665_get_crit(struct device *dev, int index)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct smm665_data *data = i2c_get_clientdata(client);
> +
> + return data->critical_max_limit[index];
> +}
> +
> +static ssize_t smm665_show_fault(struct device *dev,
> + struct device_attribute *da, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> + struct smm665_data *data = smm665_update_device(dev);
> + int val = 0;
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + if (data->faults & (1 << attr->index))
> + val = 1;
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t smm665_show_input(struct device *dev,
> + struct device_attribute *da, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> + struct smm665_data *data = smm665_update_device(dev);
> + int adc = attr->index;
> + int val;
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + val = smm665_convert(data->adc[adc], adc);
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +#define SMM665_SHOW(what) \
> + static ssize_t smm665_show_##what(struct device *dev, \
> + struct device_attribute *da, char *buf) \
> +{ \
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
> + const int val = smm665_get_##what(dev, attr->index); \
> + return snprintf(buf, PAGE_SIZE, "%d\n", val); \
> +}
> +
> +SMM665_SHOW(min);
> +SMM665_SHOW(max);
> +SMM665_SHOW(lcrit);
> +SMM665_SHOW(crit);
> +
> +/* These macros are used below in constructing device attribute objects
> + * for use with sysfs_create_group() to make a sysfs device file
> + * for each register.
> + */
> +
> +#define SMM665_ATTR(name, type, cmd_idx) \
> + static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \
> + smm665_show_##type, NULL, cmd_idx)
> +
> +/* Construct a sensor_device_attribute structure for each register */
> +
> +/* Input voltages */
> +SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V);
> +SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD);
> +SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A);
> +SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B);
> +SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C);
> +SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D);
> +SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E);
> +SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F);
> +SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1);
> +SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2);
> +
> +/* Input voltages min */
> +SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V);
> +SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD);
> +SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A);
> +SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B);
> +SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C);
> +SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D);
> +SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E);
> +SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F);
> +SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1);
> +SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2);
> +
> +/* Input voltages max */
> +SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V);
> +SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD);
> +SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A);
> +SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B);
> +SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C);
> +SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D);
> +SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E);
> +SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F);
> +SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1);
> +SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2);
> +
> +/* Input voltages lcrit */
> +SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V);
> +SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD);
> +SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A);
> +SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B);
> +SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C);
> +SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D);
> +SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E);
> +SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F);
> +SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1);
> +SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2);
> +
> +/* Input voltages crit */
> +SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V);
> +SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD);
> +SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A);
> +SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B);
> +SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C);
> +SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D);
> +SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E);
> +SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F);
> +SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1);
> +SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2);
> +
> +/* Faults */
> +SMM665_ATTR(in1, fault, SMM665_FAULT_12V);
> +SMM665_ATTR(in2, fault, SMM665_FAULT_VDD);
> +SMM665_ATTR(in3, fault, SMM665_FAULT_A);
> +SMM665_ATTR(in4, fault, SMM665_FAULT_B);
> +SMM665_ATTR(in5, fault, SMM665_FAULT_C);
> +SMM665_ATTR(in6, fault, SMM665_FAULT_D);
> +SMM665_ATTR(in7, fault, SMM665_FAULT_E);
> +SMM665_ATTR(in8, fault, SMM665_FAULT_F);
> +SMM665_ATTR(in9, fault, SMM665_FAULT_AIN1);
> +SMM665_ATTR(in10, fault, SMM665_FAULT_AIN2);
> +
> +/* Temperature */
> +SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP);
> +SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP);
> +SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP);
> +SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP);
> +SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP);
> +SMM665_ATTR(temp1, fault, SMM665_FAULT_TEMP);
> +
> +/*
> + * Finally, construct an array of pointers to members of the above objects,
> + * as required for sysfs_create_group()
> + */
> +static struct attribute *smm665_attributes[] = {
> + &sensor_dev_attr_in1_input.dev_attr.attr,
> + &sensor_dev_attr_in1_min.dev_attr.attr,
> + &sensor_dev_attr_in1_max.dev_attr.attr,
> + &sensor_dev_attr_in1_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in1_crit.dev_attr.attr,
> + &sensor_dev_attr_in1_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in2_input.dev_attr.attr,
> + &sensor_dev_attr_in2_min.dev_attr.attr,
> + &sensor_dev_attr_in2_max.dev_attr.attr,
> + &sensor_dev_attr_in2_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in2_crit.dev_attr.attr,
> + &sensor_dev_attr_in2_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in3_input.dev_attr.attr,
> + &sensor_dev_attr_in3_min.dev_attr.attr,
> + &sensor_dev_attr_in3_max.dev_attr.attr,
> + &sensor_dev_attr_in3_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in3_crit.dev_attr.attr,
> + &sensor_dev_attr_in3_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in4_input.dev_attr.attr,
> + &sensor_dev_attr_in4_min.dev_attr.attr,
> + &sensor_dev_attr_in4_max.dev_attr.attr,
> + &sensor_dev_attr_in4_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in4_crit.dev_attr.attr,
> + &sensor_dev_attr_in4_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in5_input.dev_attr.attr,
> + &sensor_dev_attr_in5_min.dev_attr.attr,
> + &sensor_dev_attr_in5_max.dev_attr.attr,
> + &sensor_dev_attr_in5_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in5_crit.dev_attr.attr,
> + &sensor_dev_attr_in5_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in6_input.dev_attr.attr,
> + &sensor_dev_attr_in6_min.dev_attr.attr,
> + &sensor_dev_attr_in6_max.dev_attr.attr,
> + &sensor_dev_attr_in6_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in6_crit.dev_attr.attr,
> + &sensor_dev_attr_in6_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in7_input.dev_attr.attr,
> + &sensor_dev_attr_in7_min.dev_attr.attr,
> + &sensor_dev_attr_in7_max.dev_attr.attr,
> + &sensor_dev_attr_in7_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in7_crit.dev_attr.attr,
> + &sensor_dev_attr_in7_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in8_input.dev_attr.attr,
> + &sensor_dev_attr_in8_min.dev_attr.attr,
> + &sensor_dev_attr_in8_max.dev_attr.attr,
> + &sensor_dev_attr_in8_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in8_crit.dev_attr.attr,
> + &sensor_dev_attr_in8_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in9_input.dev_attr.attr,
> + &sensor_dev_attr_in9_min.dev_attr.attr,
> + &sensor_dev_attr_in9_max.dev_attr.attr,
> + &sensor_dev_attr_in9_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in9_crit.dev_attr.attr,
> + &sensor_dev_attr_in9_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_in10_input.dev_attr.attr,
> + &sensor_dev_attr_in10_min.dev_attr.attr,
> + &sensor_dev_attr_in10_max.dev_attr.attr,
> + &sensor_dev_attr_in10_lcrit.dev_attr.attr,
> + &sensor_dev_attr_in10_crit.dev_attr.attr,
> + &sensor_dev_attr_in10_fault.dev_attr.attr,
> +
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + &sensor_dev_attr_temp1_min.dev_attr.attr,
> + &sensor_dev_attr_temp1_max.dev_attr.attr,
> + &sensor_dev_attr_temp1_lcrit.dev_attr.attr,
> + &sensor_dev_attr_temp1_crit.dev_attr.attr,
> + &sensor_dev_attr_temp1_fault.dev_attr.attr,
> +
> + NULL,
> +};
> +
> +static const struct attribute_group smm665_group = {
> + .attrs = smm665_attributes,
> +};
> +
> +static int smm665_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct i2c_adapter *adapter = client->adapter;
> + struct smm665_data *data;
> + int i, ret;
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
> + | I2C_FUNC_SMBUS_WORD_DATA))
> + return -ENODEV;
> +
> + if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0)
> + return -ENODEV;
> +
> + ret = -ENOMEM;
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data)
> + goto out_return;
> +
> + i2c_set_clientdata(client, data);
> + mutex_init(&data->update_lock);
> +
> + data->type = id->driver_data;
> + data->cmdreg = i2c_new_dummy(adapter, (client->addr & ~SMM665_REGMASK)
> + | SMM665_CMDREG_BASE);
> + if (!data->cmdreg)
> + goto out_kfree;
> +
> + switch (data->type) {
> + case smm465:
> + case smm665:
> + data->conversion_time = SMM665_ADC_WAIT_SMM665;
> + break;
> + case smm665c:
> + case smm764:
> + case smm766:
> + data->conversion_time = SMM665_ADC_WAIT_SMM766;
> + break;
> + }
> +
> + ret = -ENODEV;
> + if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0)
> + goto out_unregister;
> +
> + /*
> + * Read limits.
> + *
> + * Limit registers start with register SMM665_LIMIT_BASE.
> + * Each channel uses 8 registers, providing four limit values
> + * per channel. Each limit value requires two registers, with the
> + * high byte in the first register and the low byte in the second
> + * register. The first two limits are under limit values, followed
> + * by two over limit values.
> + *
> + * Limit register order matches the ADC register order, so we use
> + * ADC register defines throughout the code to index limit registers.
> + *
> + * We save the first retrieved value both as "critical" and "alarm"
> + * value. The second value overwrites either the critical or the
> + * alarm value, depending on its configuration. This ensures that both
> + * critical and alarm values are initialized, even if both registers are
> + * configured as critical or non-critical.
> + *
> + * Note: Critical values for voltage channels are saved, even though
> + * this information is currently not used by the driver. This is mostly
> + * for consistency, though it might eventually be useful if future APIs
> + * support reporting "critical" voltage values.
Comment is out of date. Looks like you just added the api ;)
> + */
> + for (i = 0; i < SMM665_NUM_ADC; i++) {
> + int val;
> +
> + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8);
> + if (unlikely(val < 0))
> + goto out_unregister;
> + data->critical_min_limit[i] = data->alarm_min_limit[i]
> + = smm665_convert(val, i);
> + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2);
> + if (unlikely(val < 0))
> + goto out_unregister;
> + if (smm665_is_critical(val))
> + data->critical_min_limit[i] = smm665_convert(val, i);
> + else
> + data->alarm_min_limit[i] = smm665_convert(val, i);
> + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4);
> + if (unlikely(val < 0))
> + goto out_unregister;
> + data->critical_max_limit[i] = data->alarm_max_limit[i]
> + = smm665_convert(val, i);
> + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6);
> + if (unlikely(val < 0))
> + goto out_unregister;
> + if (smm665_is_critical(val))
> + data->critical_max_limit[i] = smm665_convert(val, i);
> + else
> + data->alarm_max_limit[i] = smm665_convert(val, i);
> + }
> +
> + /* Register sysfs hooks */
> + ret = sysfs_create_group(&client->dev.kobj, &smm665_group);
> + if (ret)
> + goto out_unregister;
> +
> + data->hwmon_dev = hwmon_device_register(&client->dev);
> + if (IS_ERR(data->hwmon_dev)) {
> + ret = PTR_ERR(data->hwmon_dev);
> + goto out_remove_group;
> + }
> +
> + return 0;
> +
> +out_remove_group:
> + sysfs_remove_group(&client->dev.kobj, &smm665_group);
> +out_unregister:
> + i2c_unregister_device(data->cmdreg);
> +out_kfree:
> + kfree(data);
> +out_return:
> + return ret;
> +}
> +
> +static int smm665_remove(struct i2c_client *client)
> +{
> + struct smm665_data *data = i2c_get_clientdata(client);
> +
> + i2c_unregister_device(data->cmdreg);
> + hwmon_device_unregister(data->hwmon_dev);
> + sysfs_remove_group(&client->dev.kobj, &smm665_group);
> +
> + kfree(data);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id smm665_id[] = {
> + {"smm465", smm465},
> + {"smm665", smm665},
> + {"smm665c", smm665c},
> + {"smm764", smm764},
> + {"smm766", smm766},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, smm665_id);
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver smm665_driver = {
> + .driver = {
> + .name = "smm665",
> + },
> + .probe = smm665_probe,
> + .remove = smm665_remove,
> + .id_table = smm665_id,
> +};
> +
> +static int __init smm665_init(void)
> +{
> + return i2c_add_driver(&smm665_driver);
> +}
> +
> +static void __exit smm665_exit(void)
> +{
> + i2c_del_driver(&smm665_driver);
> +}
> +
> +MODULE_AUTHOR("Guenter Roeck");
> +MODULE_DESCRIPTION("SMM665 driver");
> +MODULE_LICENSE("GPL");
> +
> +module_init(smm665_init);
> +module_exit(smm665_exit);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists