lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AANLkTikJvUIcx744weazBmOfyZzEu8NgYZ4oaLP2TbZ0@mail.gmail.com>
Date:	Tue, 29 Jun 2010 16:20:20 -0700
From:	Chris Li <lkml@...isli.org>
To:	Dan Williams <dan.j.williams@...el.com>
Cc:	linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: BUG in drivers/dma/ioat/dma_v2.c:314

On Mon, Jun 28, 2010 at 5:45 PM, Dan Williams <dan.j.williams@...el.com> wrote:
> Looks like that dev_err() did not make it to the console.  The attached
> patch should get us some more debug information.  This will stop the driver
> from making forward progress (applies to current -git).  I suspect this may
> be triggering from the driver self test, but to be safe you should set
> CONFIG_NET_DMA=n and CONFIG_ASYNC_TX_DMA=n.

OK, with the patch it does not kernel panic any more.

Here is the prink from ioatdma.

ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:0f.0: can't derive routing for PCI INT A
ioatdma 0000:00:0f.0: PCI INT A: no GSI
ioatdma 0000:00:0f.0: setting latency timer to 64
  alloc irq_desc for 57 on node -1
  alloc kstat_irqs on node -1
ioatdma 0000:00:0f.0: irq 57 for MSI/MSI-X
  alloc irq_desc for 58 on node -1
  alloc kstat_irqs on node -1
ioatdma 0000:00:0f.0: irq 58 for MSI/MSI-X
  alloc irq_desc for 59 on node -1
  alloc kstat_irqs on node -1
ioatdma 0000:00:0f.0: irq 59 for MSI/MSI-X
  alloc irq_desc for 60 on node -1
  alloc kstat_irqs on node -1
ioatdma 0000:00:0f.0: irq 60 for MSI/MSI-X
------------[ cut here ]------------
WARNING: at drivers/dma/ioat/dma_v2.c:289 ioat2_timer_event+0xbc/0x225
[ioatdma]()
Hardware name: MacPro3,1
0000:00:0f.0: ioat2_timer_event: Channel halted (10)
Modules linked in: ioatdma(+) dca fuse rfcomm sco bridge stp llc bnep
l2cap autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf
ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 uinput
e1000e snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep
snd_seq i5400_edac snd_seq_device snd_pcm snd_timer snd edac_core
btusb bluetooth rfkill soundcore i5k_amb i2c_i801 shpchp applesmc
snd_page_alloc iTCO_wdt iTCO_vendor_support input_polldev
firewire_ohci firewire_core crc_itu_t radeon ttm drm_kms_helper drm
i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #41
Call Trace:
 <IRQ>  [<ffffffff8104bdac>] warn_slowpath_common+0x85/0x9d
 [<ffffffff8104be67>] warn_slowpath_fmt+0x46/0x48
 [<ffffffff810100a5>] ? sched_clock+0x9/0xd
 [<ffffffffa03ee4ed>] ioat2_timer_event+0xbc/0x225 [ioatdma]
 [<ffffffff81069d76>] ? sched_clock_cpu+0xc3/0xce
 [<ffffffff81058a6a>] run_timer_softirq+0x1d6/0x2a5
 [<ffffffffa03ee431>] ? ioat2_timer_event+0x0/0x225 [ioatdma]
 [<ffffffff8106cc08>] ? ktime_get+0x65/0xbe
 [<ffffffff81051ddb>] __do_softirq+0xe9/0x1ae
 [<ffffffff81070f70>] ? tick_program_event+0x2a/0x2c
 [<ffffffff8100ab1c>] call_softirq+0x1c/0x30
 [<ffffffff8100c18a>] do_softirq+0x46/0x83
 [<ffffffff81051c48>] irq_exit+0x3b/0x7d
 [<ffffffff81433638>] smp_apic_timer_interrupt+0x8d/0x9b
 [<ffffffff8100a5d3>] apic_timer_interrupt+0x13/0x20
 <EOI>  [<ffffffff810115fd>] ? mwait_idle+0x7a/0x87
 [<ffffffff810115af>] ? mwait_idle+0x2c/0x87
 [<ffffffff81008c1f>] cpu_idle+0xaa/0xe4
 [<ffffffff81427eb0>] start_secondary+0x253/0x294---[ end trace
69aa12150c49792c ]---
ioatdma 0000:00:0f.0: Self-test copy timed out, disabling
ioatdma 0000:00:0f.0: Freeing 2 in use descriptors!
ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:0f.0: can't derive routing for PCI INT A


I attach the full dmesg in case you need it. Is it possible that
the Mac Pro is MSI only and ioatdma is not happy about that?

Chris

Download attachment "dmesg" of type "application/octet-stream" (58687 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ