lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <AANLkTimVkG9TFgyOTTnrztBjqT4JoOzFaP268vWLAAm9@mail.gmail.com>
Date:	Fri, 2 Jul 2010 10:56:45 -0700
From:	Mark Knecht <markknecht@...il.com>
To:	Linux Kernel List <linux-kernel@...r.kernel.org>
Subject: Drives missing at boot

Hi,
   I have a newish machine - maybe 3 months old - which unreliably
finds its disk drives at each boot. Probably 40% of the time booting 1
or more drives will be missing.

   So far I've been unable to determine what might be wrong. Sometimes
it finds all 5 drives, sometimes only 4 or 3 drives. It's not always
the same drives that are missing. Shown below are two successive warm
boots. The machien had been running with all 5 drives working. The
first time through it missed both /dev/sdd and /dev/sde while the very
next time it found all 5 drives. Each of the 5 drives has been missing
one or more times at different boots. (I.e. - it's not always drive
sdd for instance.)

   Every time I boot the AMI BIOS screen says all 5 drives are there.
I have found that if I drop into BIOS before going to grub that
selecting each drive one at a time and reading through it's setup
seems to make the boot more reliable, but not 100%. Probably 80%
reliable.

   I don't know what info is required to look at this. I'm running the
newest Gentoo kernel but it's been happening with all kernels I've
tried since I built the machine. I'm attaching the kernel config as
well as dmesg from the last boot which had all the drives. The only
difference in dmesg when the drives don't show up (that I've spotted)
is that the missing drive just isn't in dmesg. (I.e. no error messages
that I could spot.)

   Let me know what I might try or what other info you might want. The
motherboard is an Asus Rampage II Extreme with an i7-980x 6 core/12
thread processor. sda, sdb & sdc are part of a RAID1, sdd & sde are
part of a RAID0.

Thanks,
Mark

mark@...table ~ $ uname -a
Linux c2stable 2.6.34-gentoo-r1 #1 SMP PREEMPT Fri Jul 2 10:04:52 PDT
2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
GNU/Linux
mark@...table ~ $
mark@...table ~ $ ls -la /dev/sd*
brw-rw---- 1 root disk 8,  0 Jul  2  2010 /dev/sda
brw-rw---- 1 root disk 8,  1 Jul  2  2010 /dev/sda1
brw-rw---- 1 root disk 8,  2 Jul  2  2010 /dev/sda2
brw-rw---- 1 root disk 8,  3 Jul  2  2010 /dev/sda3
brw-rw---- 1 root disk 8,  4 Jul  2  2010 /dev/sda4
brw-rw---- 1 root disk 8,  5 Jul  2  2010 /dev/sda5
brw-rw---- 1 root disk 8,  6 Jul  2  2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul  2  2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul  2  2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul  2  2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul  2  2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul  2  2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul  2  2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul  2  2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul  2  2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul  2  2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul  2  2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul  2  2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul  2  2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul  2  2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul  2  2010 /dev/sdc6
mark@...table ~ $

[AFTER A REBOOT]

mark@...table ~ $ ls -la /dev/sd*
brw-rw---- 1 root disk 8,  0 Jul  2  2010 /dev/sda
brw-rw---- 1 root disk 8,  1 Jul  2  2010 /dev/sda1
brw-rw---- 1 root disk 8,  2 Jul  2  2010 /dev/sda2
brw-rw---- 1 root disk 8,  3 Jul  2  2010 /dev/sda3
brw-rw---- 1 root disk 8,  4 Jul  2  2010 /dev/sda4
brw-rw---- 1 root disk 8,  5 Jul  2  2010 /dev/sda5
brw-rw---- 1 root disk 8,  6 Jul  2  2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul  2  2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul  2  2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul  2  2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul  2  2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul  2  2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul  2  2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul  2  2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul  2  2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul  2  2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul  2  2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul  2  2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul  2  2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul  2  2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul  2  2010 /dev/sdc6
brw-rw---- 1 root disk 8, 48 Jul  2  2010 /dev/sdd
brw-rw---- 1 root disk 8, 49 Jul  2  2010 /dev/sdd1
brw-rw---- 1 root disk 8, 64 Jul  2  2010 /dev/sde
brw-rw---- 1 root disk 8, 65 Jul  2  2010 /dev/sde1
mark@...table ~ $
c2stable ~ # lspci -v
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
        Subsystem: ASUSTeK Computer Inc. Device 836b
        Flags: fast devsel
        Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
        Capabilities: [90] Express Root Port (Slot-), MSI 00
        Capabilities: [e0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [150] Access Control Services
        Capabilities: [160] Vendor Specific Information <?>

00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device
836b
        Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Capabilities: [90] Express Root Port (Slot+), MSI 00
        Capabilities: [e0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [150] Access Control Services
        Capabilities: [160] Vendor Specific Information <?>
        Kernel driver in use: pcieport

00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
        Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Capabilities: [90] Express Root Port (Slot+), MSI 00
        Capabilities: [e0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [150] Access Control Services
        Capabilities: [160] Vendor Specific Information <?>
        Kernel driver in use: pcieport

00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fba00000-fbafffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
        Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Capabilities: [90] Express Root Port (Slot+), MSI 00
        Capabilities: [e0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [150] Access Control Services
        Capabilities: [160] Vendor Specific Information <?>
        Kernel driver in use: pcieport

00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers (rev 13) (prog-if 00 [8259])
        Flags: fast devsel
        Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00

00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers (rev 13) (prog-if 00 [8259])
        Flags: fast devsel
        Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00

00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status
and RAS Registers (rev 13) (prog-if 00 [8259])
        Flags: fast devsel
        Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00

00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle
Registers (rev 13) (prog-if 00 [8259])
        Flags: fast devsel

00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 9800 [size=32]
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 9880 [size=32]
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd

00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 9c00 [size=32]
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at fb9ff000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
        Subsystem: ASUSTeK Computer Inc. Device 82ea
        Flags: bus master, fast devsel, latency 0, IRQ 57
        Memory at fb9f8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 1 (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: c0000000-c03fffff
        Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 3 (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fbd00000-fbdfffff
        Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 5 (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fbc00000-fbcfffff
        Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport

00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 6 (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fbb00000-fbbfffff
        Prefetchable memory behind bridge: 00000000c0800000-00000000c09fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at 9080 [size=32]
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 9400 [size=32]
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 9480 [size=32]
        Capabilities: [50] PCI Advanced Features
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at fb9fe000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
(prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fbe00000-fbefffff
        Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4

00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>

00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at 8000 [size=8]
        I/O ports at 7c00 [size=4]
        I/O ports at 7880 [size=8]
        I/O ports at 7800 [size=4]
        I/O ports at 7480 [size=16]
        I/O ports at 7400 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: medium devsel, IRQ 18
        Memory at fb9fd000 (64-bit, non-prefetchable) [size=256]
        I/O ports at 0400 [size=32]
        Kernel modules: i2c-i801

00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Device 82d4
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at 9000 [size=8]
        I/O ports at 8c00 [size=4]
        I/O ports at 8880 [size=8]
        I/O ports at 8800 [size=4]
        I/O ports at 8480 [size=16]
        I/O ports at 8400 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ata_piix

03:00.0 VGA compatible controller: ATI Technologies Inc Device 68b8
(prog-if 00 [VGA controller])
        Subsystem: XFX Pine Group Inc. Device 2991
        Flags: bus master, fast devsel, latency 0, IRQ 30
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fbac0000 (64-bit, non-prefetchable) [size=128K]
        I/O ports at a000 [size=256]
        Expansion ROM at fbaa0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: radeon
        Kernel modules: radeon

03:00.1 Audio device: ATI Technologies Inc Device aa58
        Subsystem: XFX Pine Group Inc. Device aa58
        Flags: bus master, fast devsel, latency 0, IRQ 58
        Memory at fbafc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
        Subsystem: ASUSTeK Computer Inc. Device 81f8
        Flags: bus master, fast devsel, latency 0, IRQ 56
        Memory at fbbfc000 (64-bit, non-prefetchable) [size=16K]
        I/O ports at b800 [size=256]
        Expansion ROM at fbbc0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data
        Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [e0] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Kernel driver in use: sky2
        Kernel modules: sky2

05:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial
ATA Controller (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Device 824f
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

05:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA
Controller (rev 03) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Device 824f
        Flags: fast devsel
        I/O ports at cc00 [disabled] [size=8]
        I/O ports at c880 [disabled] [size=4]
        I/O ports at c800 [disabled] [size=8]
        I/O ports at c480 [disabled] [size=4]
        I/O ports at c400 [disabled] [size=16]
        Capabilities: [68] Power Management version 2

06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
        Subsystem: ASUSTeK Computer Inc. Device 81f8
        Flags: bus master, fast devsel, latency 0, IRQ 55
        Memory at fbdfc000 (64-bit, non-prefetchable) [size=16K]
        I/O ports at d800 [size=256]
        Expansion ROM at fbdc0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data
        Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [e0] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Kernel driver in use: sky2
        Kernel modules: sky2

08:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II
IEEE 1394 OHCI Link Layer Controller (rev c0) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device 81fe
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at fbeff000 (32-bit, non-prefetchable) [size=2K]
        I/O ports at ec00 [size=128]
        Capabilities: [50] Power Management version 2

c2stable ~ #



c2stable ~ # dmesg
Linux version 2.6.34-gentoo-r1 (root@...table) (gcc version 4.4.3
(Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Fri Jul 2 10:04:52 PDT 2010
Command line: root=/dev/md5
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
 BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
 BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
 BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask F00000000 write-back
  2 base 300000000 mask FC0000000 write-back
  3 base 0C0000000 mask FC0000000 uncachable
  4 base 0BF800000 mask FFF800000 uncachable
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf780000
 0000000000 - 0080000000 page 1G
 0080000000 - 00bf600000 page 2M
 00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 12000-15000
init_memory_mapping: 0000000100000000-0000000340000000
 0100000000 - 0340000000 page 1G
kernel direct mapping tables up to 340000000 @ 14000-15000
ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0D2BA (v01  A1088 A1088000 00000000 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG  20100128 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET  20100128 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR  20100128 MSFT 00000097)
ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea000b5fffff] PMD ->
[ffff880002000000-ffff88000c7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00340000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000bf780
    0: 0x00100000 -> 0x00340000
On node 0 totalpages: 3143439
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3927 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 765880 pages, LIFO batch:31
  Normal zone: 32256 pages used for memmap
  Normal zone: 2327040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
16 Processors exceeds NR_CPUS limit of 12
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
early_res array is doubled to 64 at [14000 - 147ff]
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3096847
Kernel command line: root=/dev/md5
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
early_res array is doubled to 128 at [14800 - 157ff]
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Subtract (60 early reservations)
  #1 [0001000000 - 0001771244]   TEXT DATA BSS
  #2 [0001772000 - 0001772298]             BRK
  #3 [00000ff790 - 0000100000]   BIOS reserved
  #4 [00000ff780 - 00000ff790]    MP-table mpf
  #5 [000009fc00 - 00000f1310]   BIOS reserved
  #6 [00000f14fc - 00000ff780]   BIOS reserved
  #7 [00000f1310 - 00000f14fc]    MP-table mpc
  #8 [0000010000 - 0000012000]      TRAMPOLINE
  #9 [0000012000 - 0000014000]         PGTABLE
  #10 [00017722c0 - 00017732c0]         BOOTMEM
  #11 [0001771280 - 0001771880]         BOOTMEM
  #12 [0001f74000 - 0001f75000]         BOOTMEM
  #13 [0001f75000 - 0001f76000]         BOOTMEM
  #14 [0002000000 - 000c800000]        MEMMAP 0
  #15 [0001771880 - 0001771a00]         BOOTMEM
  #16 [00017732c0 - 000178b2c0]         BOOTMEM
  #17 [000178b2c0 - 00017a32c0]         BOOTMEM
  #18 [00017a4000 - 00017a5000]         BOOTMEM
  #19 [0001771a00 - 0001771a41]         BOOTMEM
  #20 [0001771a80 - 0001771b06]         BOOTMEM
  #21 [0001771b40 - 0001771da8]         BOOTMEM
  #22 [0001771dc0 - 0001771e28]         BOOTMEM
  #23 [0001771e40 - 0001771ea8]         BOOTMEM
  #24 [0001771ec0 - 0001771f28]         BOOTMEM
  #25 [0001771f40 - 0001771fa8]         BOOTMEM
  #26 [00017a32c0 - 00017a3328]         BOOTMEM
  #27 [00017a3340 - 00017a33a8]         BOOTMEM
  #28 [00017a33c0 - 00017a3428]         BOOTMEM
  #29 [00017a3440 - 00017a34a8]         BOOTMEM
  #30 [00017a34c0 - 00017a3528]         BOOTMEM
  #31 [00017a3540 - 00017a35a8]         BOOTMEM
  #32 [0001771fc0 - 0001771fce]         BOOTMEM
  #33 [00017a35c0 - 00017a35ce]         BOOTMEM
  #34 [0001800000 - 000181a000]         BOOTMEM
  #35 [0001820000 - 000183a000]         BOOTMEM
  #36 [0001840000 - 000185a000]         BOOTMEM
  #37 [0001860000 - 000187a000]         BOOTMEM
  #38 [0001880000 - 000189a000]         BOOTMEM
  #39 [00018a0000 - 00018ba000]         BOOTMEM
  #40 [00018c0000 - 00018da000]         BOOTMEM
  #41 [00018e0000 - 00018fa000]         BOOTMEM
  #42 [0001900000 - 000191a000]         BOOTMEM
  #43 [0001920000 - 000193a000]         BOOTMEM
  #44 [0001940000 - 000195a000]         BOOTMEM
  #45 [0001960000 - 000197a000]         BOOTMEM
  #46 [00017a3600 - 00017a3608]         BOOTMEM
  #47 [00017a3640 - 00017a3648]         BOOTMEM
  #48 [00017a3680 - 00017a36b0]         BOOTMEM
  #49 [00017a36c0 - 00017a3720]         BOOTMEM
  #50 [00017a3740 - 00017a3850]         BOOTMEM
  #51 [00017a3880 - 00017a38c8]         BOOTMEM
  #52 [00017a3900 - 00017a3948]         BOOTMEM
  #53 [00017a5000 - 00017ad000]         BOOTMEM
  #54 [000c800000 - 000d800000]         BOOTMEM
  #55 [000d800000 - 000e000000]         BOOTMEM
  #56 [000e000000 - 0012000000]         BOOTMEM
  #57 [00017ad000 - 00017cd000]         BOOTMEM
  #58 [000197a000 - 00019ba000]         BOOTMEM
  #59 [0000015800 - 000001d800]         BOOTMEM
Memory: 12302060k/13631488k available (3665k kernel code, 1057732k
absent, 271696k reserved, 2924k data, 476k init)
Experimental preemptable hierarchical RCU implementation.
NR_IRQS:640
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3337.884 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 6675.76 BogoMIPS (lpj=3337884)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20100121
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU       X 980  @ 3.33GHz stepping 02
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
Brought up 12 CPUs
Total of 12 processors activated (81162.38 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0x9800-0x981f]
pci 0000:00:1a.1: reg 20: [io  0x9880-0x989f]
pci 0000:00:1a.2: reg 20: [io  0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x9080-0x909f]
pci 0000:00:1d.1: reg 20: [io  0x9400-0x941f]
pci 0000:00:1d.2: reg 20: [io  0x9480-0x949f]
pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10: [io  0x8000-0x8007]
pci 0000:00:1f.2: reg 14: [io  0x7c00-0x7c03]
pci 0000:00:1f.2: reg 18: [io  0x7880-0x7887]
pci 0000:00:1f.2: reg 1c: [io  0x7800-0x7803]
pci 0000:00:1f.2: reg 20: [io  0x7480-0x748f]
pci 0000:00:1f.2: reg 24: [io  0x7400-0x740f]
pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1f.5: reg 10: [io  0x9000-0x9007]
pci 0000:00:1f.5: reg 14: [io  0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18: [io  0x8880-0x8887]
pci 0000:00:1f.5: reg 1c: [io  0x8800-0x8803]
pci 0000:00:1f.5: reg 20: [io  0x8480-0x848f]
pci 0000:00:1f.5: reg 24: [io  0x8400-0x840f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
pci 0000:03:00.0: reg 20: [io  0xa000-0xa0ff]
pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:07.0:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:07.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [io  0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10: [io  0xcc00-0xcc07]
pci 0000:05:00.1: reg 14: [io  0xc880-0xc883]
pci 0000:05:00.1: reg 18: [io  0xc800-0xc807]
pci 0000:05:00.1: reg 1c: [io  0xc480-0xc483]
pci 0000:05:00.1: reg 20: [io  0xc400-0xc40f]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:04:00.0: reg 18: [io  0xb800-0xb8ff]
pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14: [io  0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff]
(subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:07: [io  0x0290-0x029f] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0500-0x057f] could not be reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem disabled]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem disabled]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:07.0:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:07.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5:   bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
software IO TLB at phys 0xe000000 - 0x12000000
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.13)
msgmni has been set to 24027
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
Non-volatile memory driver v1.3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@...bcfe000 port 0xfbcfe100 irq 16
ata2: SATA max UDMA/133 abar m8192@...bcfe000 port 0xfbcfe180 irq 16
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@...hat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: link resume succeeded after 1 retries
ata5: link resume succeeded after 1 retries
usb 3-2: new full speed USB device using uhci_hcd and address 2
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/133
usb 3-2: New USB device found, idVendor=051d, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
usb 3-2: Manufacturer: American Power Conversion
usb 3-2: SerialNumber: 3B1007X44377
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00
Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB
FW:L1  ] on usb-0000:00:1a.0-2/input0
ata3.00: SATA link down (SStatus 0 SControl 301)
ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access     ATA      WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:1:0: Attached scsi generic sg0 type 0
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1 sda2 sda3 sda4 <
ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
 sda5
ata4.00: configured for UDMA/133
ata4.01: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:1:0: Direct-Access     ATA      WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:1:0: Attached scsi generic sg2 type 0
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
 sdc:
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg3 type 0
 sdd:
scsi 5:0:0:0: Direct-Access     ATA      WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sde: sda6 >
 sde1
sd 5:0:0:0: [sde] Attached SCSI disk
 sdc1
sd 3:0:0:0: [sdb] Write Protect is off
 sdc2 sdc3 sdc4 < sdd1
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 2:0:1:0: [sda] Attached SCSI disk
 sdc5
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sdc6 >
 sdb:
sd 3:0:1:0: [sdc] Attached SCSI disk
 sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 8-2: new low speed USB device using uhci_hcd and address 2
usb 8-2: New USB device found, idVendor=045e, idProduct=0039
usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 8-2: Manufacturer: Microsoft
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse
[Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.2-2/input0
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 6 and added 6 devices.
md: autorun ...
md: considering sdb5 ...
md:  adding sdb5 ...
md: sdb3 has different UUID to sdb5
md:  adding sdc5 ...
md: sdc3 has different UUID to sdb5
md:  adding sda5 ...
md: sda3 has different UUID to sdb5
md: created md5
md: bind<sda5>
md: bind<sdc5>
md: bind<sdb5>
md: running: <sdb5><sdc5><sda5>
raid1: raid set md5 active with 3 out of 3 mirrors
md5: detected capacity change from 0 to 53694496768
md: considering sdb3 ...
md:  adding sdb3 ...
md:  adding sdc3 ...
md:  adding sda3 ...
md: created md3
md: bind<sda3>
md: bind<sdc3>
md: bind<sdb3>
md: running: <sdb3><sdc3><sda3>
raid1: raid set md3 active with 3 out of 3 mirrors
md3: detected capacity change from 0 to 53694562304
md: ... autorun DONE.
 md5: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md5): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
Freeing unused kernel memory: 476k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 412k freed
Freeing unused kernel memory: 224k freed
udev: starting version 149
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI
region SMRG [mem 0x00000400-0x0000040f pref disabled]
ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver
 md3: unknown partition table
sky2: driver version 1.27
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0: irq 55 for MSI/MSI-X
sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:04:00.0: irq 56 for MSI/MSI-X
sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
radeon 0000:03:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[drm] register mmio base: 0xFBAC0000
[drm] register mmio size: 131072
ATOM BIOS: JUNIPER
[drm] Clocks initialized !
[drm] 1 Power State(s)
[drm] State 0 Default (default)
[drm]   16 PCIE Lanes
[drm]   1 Clock Mode(s)
[drm]           0 engine/memory: 850000/1200000
[drm] radeon: power management initialized
radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 6151604 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DisplayPort
[drm]   HPD4
[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   HDMI-A
[drm]   HPD5
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY1
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm]   DVI-I
[drm]   HPD6
[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm]   Encoders:
[drm]     DFP4: INTERNAL_UNIPHY
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
Console: switching to colour frame buffer device 240x67
hda_codec: AD1989B: BIOS auto-probing.
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
HDA Intel 0000:03:00.1: setting latency timer to 64
EXT3-fs (md5): using internal journal
md: md11 stopped.
md: bind<sde1>
md: bind<sdd1>
raid0: looking at sdd1
raid0:   comparing sdd1(104871936)
 with sdd1(104871936)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sde1
raid0:   comparing sde1(104871936)
 with sdd1(104871936)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 209743872 sectors.
******* md11 configuration *********
zone0=[sdd1/sde1/]
        zone offset=0kb device offset=0kb size=104871936kb
**********************************

md11: detected capacity change from 0 to 107388862464
 md11: unknown partition table
md: md6 stopped.
md: bind<sdb6>
md: bind<sdc6>
md: bind<sda6>
raid1: raid set md6 active with 3 out of 3 mirrors
md6: detected capacity change from 0 to 253354939392
 md6: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md11): warning: maximal mount count reached, running e2fsck
is recommended
EXT3-fs (md11): using internal journal
EXT3-fs (md11): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is
recommended
EXT3-fs (md6): using internal journal
EXT3-fs (md6): mounted filesystem with writeback data mode
Adding 4200992k swap on /dev/sda2.  Priority:-1 extents:1 across:4200992k
Adding 4200992k swap on /dev/sdb2.  Priority:-2 extents:1 across:4200992k
Adding 4200992k swap on /dev/sdc2.  Priority:-3 extents:1 across:4200992k
sky2 0000:06:00.0: eth0: enabling interface
sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
/dev/vmmon[4187]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4187]: Initial HV check: anyNotCapable=0 anyUnlocked=0
anyEnabled=1 anyDisabled=0
/dev/vmmon[4187]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1
anyDisabled=0
/dev/vmmon[4187]: Module vmmon: initialized
/dev/vmci[4206]: VMCI: Driver initialized.
/dev/vmci[4206]: Module vmci: registered with major=10 minor=59
/dev/vmci[4206]: Module vmci: initialized
/dev/vmnet: open called by PID 4288 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 4295 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4297 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4300 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4304 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4305 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
c2stable ~ #

Download attachment "i980.2.6.34-gentoo-r1.config" of type "application/octet-stream" (65526 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ