| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1278303018-22069-5-git-send-email-guenter.roeck@ericsson.com> Date: Sun, 4 Jul 2010 21:10:18 -0700 From: Guenter Roeck <guenter.roeck@...csson.com> To: Jean Delvare <khali@...ux-fr.org>, Jonathan Cameron <kernel@...23.retrosnub.co.uk>, Randy Dunlap <rdunlap@...otime.net>, Andrew Morton <akpm@...ux-foundation.org>, "Ira W. Snyder" <iws@...o.caltech.edu>, "Darrick J. Wong" <djwong@...ibm.com>, "Ben Dooks (embedded platforms)" <ben-linux@...ff.org>, Hans de Goede <hdegoede@...hat.com>, Mark Brown <broonie@...nsource.wolfsonmicro.com>, Samuel Ortiz <sameo@...ux.intel.com>, Crane Cai <crane.cai@....com>, Linus Walleij <linus.walleij@...ricsson.com>, Ralf Baechle <ralf@...ux-mips.org> CC: lm-sensors@...sensors.org, linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org, Guenter Roeck <guenter.roeck@...csson.com> Subject: [PATCH/RFC v2 4/4] hwmon: sysfs API updates Signed-off-by: Guenter Roeck <guenter.roeck@...csson.com> --- Documentation/hwmon/sysfs-interface | 37 +++++++++++++++++++++++++++++----- 1 files changed, 31 insertions(+), 6 deletions(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index d4e2917..2dcec0f 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -421,11 +421,12 @@ power[1-*]_accuracy Accuracy of the power meter. Unit: Percent RO -power[1-*]_alarm 1 if the system is drawing more power than the - cap allows; 0 otherwise. A poll notification is - sent to this file when the power use exceeds the - cap. This file only appears if the cap is known - to be enforced by hardware. +power[1-*]_alarm 1 if the system is drawing more power than cap + or max allows; 0 otherwise. A poll notification + is sent to this file when the power use exceeds + the cap or max limit. If only cap is supported, + this file only appears if the cap is known to be + enforced by hardware. RO power[1-*]_cap If power use rises above this limit, the @@ -450,6 +451,18 @@ power[1-*]_cap_min Minimum cap that can be set. Unit: microWatt RO +power[1-*]_max Maximum power. + Unit: microWatt + RW + +power[1-*]_crit Critical maximum power. + If power rises to or above this limit, the + system will take drastic action to reduce power + consumption, such as a system shutdown. At the + very least, a power fault will be generated. + Unit: microWatt + RO + ********** * Energy * ********** @@ -471,8 +484,14 @@ limit-related alarms, not both. The driver should just reflect the hardware implementation. in[0-*]_alarm +in[0-*]_crit_alarm +curr[1-*]_alarm +curr[1-*]_crit_alarm +power[1-*]_alarm +power[1-*]_crit_alarm fan[1-*]_alarm temp[1-*]_alarm +temp[1-*]_crit_alarm Channel alarm 0: no alarm 1: alarm @@ -482,10 +501,17 @@ OR in[0-*]_min_alarm in[0-*]_max_alarm +in[0-*]_lcrit_alarm +in[0-*]_crit_alarm +curr[1-*]_lcrit_alarm +curr[1-*]_crit_alarm +power[1-*]_min_alarm +power[1-*]_max_alarm fan[1-*]_min_alarm fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm +temp[1-*]_lcrit_alarm temp[1-*]_crit_alarm Limit alarm 0: no alarm @@ -497,7 +523,6 @@ to notify open diodes, unconnected fans etc. where the hardware supports it. When this boolean has value 1, the measurement for that channel should not be trusted. -in[0-*]_fault fan[1-*]_fault temp[1-*]_fault Input fault condition -- 1.7.0.87.g0901d -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists