| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1278418937.1949.22.camel@jaunty>
Date: Tue, 06 Jul 2010 22:22:17 +1000
From: Andrew Hendry <andrew.hendry@...il.com>
To: linux-kernel <linux-kernel@...r.kernel.org>
Subject: 2.6.35-rc4 Graphics performance issue and freeing invalid memtype
messages on boot.
Some extra messages when booting with -rc4. Didn't get them in -rc3.
[ 1.387013] swapper:1 freeing invalid memtype bf788000-bf789000
[ 1.387409] swapper:1 freeing invalid memtype bf789000-bf78a000
[ 5.999675] modprobe:548 freeing invalid memtype d0000000-d0040000
[ 6.068347] modprobe:548 freeing invalid memtype d0140000-d0150000
[ 6.068647] modprobe:548 freeing invalid memtype d0150000-d0160000
[ 6.069661] modprobe:548 freeing invalid memtype d0170000-d01f0000
[ 6.085969] modprobe:548 freeing invalid memtype d01f0000-d0200000
[ 6.087673] modprobe:548 freeing invalid memtype d0210000-d0220000
[ 6.087900] modprobe:548 freeing invalid memtype d0220000-d0230000
[ 6.088092] modprobe:548 freeing invalid memtype d0230000-d0240000
[ 6.088317] modprobe:548 freeing invalid memtype d0240000-d0250000
Not sure if its related, but also have a noticeable performance issue with graphics under rc4.
Dragging and resizing windows, screen updates, and jumpy cursor are all slow.
Playing a full screen video under vlc gets only 1-2 frames per second, but plays fine under rc3.
Tested a kernel compile, it was roughly the same.
Userspace is ubunutu 10.04 64bit.
Any hints? Otherwise will start a bisect tomorrow night.
Config attached, lspci, rc3 and rc4 boot messages below:
--- RC4 ---
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-rc4 (ahendry@...nty) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #8 SMP PREEMPT Tue Jul 6 20:49:58 EST 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc4 root=UUID=6b63a9f9-effe-44e3-a29d-95e3d202659a ro libata.force=noncq ramdisk_size=2000000
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
[ 0.000000] BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf770000 (usable)
[ 0.000000] BIOS-e820: 00000000bf770000 - 00000000bf788000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf770 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c800 (usable)
[ 0.000000] modified: 000000000009c800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf770000 (usable)
[ 0.000000] modified: 00000000bf770000 - 00000000bf788000 (ACPI data)
[ 0.000000] modified: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf770000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf770000 page 4k
[ 0.000000] kernel direct mapping tables up to bf770000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ 19000-23000
[ 0.000000] RAMDISK: 372e7000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbb00 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf770100 00064 (v01 032510 XSDT2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf770290 000F4 (v03 032510 FACP2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7704a0 0EDBE (v01 A1513 A1513003 00000003 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf788000 00040
[ 0.000000] ACPI: APIC 00000000bf770390 000CC (v01 032510 APIC2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf770460 0003C (v01 032510 OEMMCFG 20100325 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf788040 00072 (v01 032510 OEMB2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf77f7a0 00038 (v01 032510 OEMHPET 20100325 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf77fa40 00034 (v06 032510 PerfTune 20100325 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf77fa80 000B0 (v01 032510 OEMOSFR 20100325 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf78a960 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880100200000-ffff8801071fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf770
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2094844
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3924 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765864 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1e000 - 1e7ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91072 r8192 d23616 u131072
[ 0.000000] early_res array is doubled to 128 at [1e800 - 1f7ff]
[ 0.000000] pcpu-alloc: s91072 r8192 d23616 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062588
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc4 root=UUID=6b63a9f9-effe-44e3-a29d-95e3d202659a ro libata.force=noncq ramdisk_size=2000000
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (66 early reservations)
[ 0.000000] #1 [0001000000 - 0001c8fe14] TEXT DATA BSS
[ 0.000000] #2 [00372e7000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001c90000 - 0001c902c4] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009c800 - 00000f1310] BIOS reserved
[ 0.000000] #7 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #12 [0000019000 - 000001e000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [0001c90300 - 0001c91300] BOOTMEM
[ 0.000000] #15 [0002091300 - 0002091900] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0107200000] MEMMAP 0
[ 0.000000] #19 [0001c8fe40 - 0001c8ffc0] BOOTMEM
[ 0.000000] #20 [0001c91300 - 0001ca9300] BOOTMEM
[ 0.000000] #21 [0001ca9300 - 0001cc1300] BOOTMEM
[ 0.000000] #22 [0001cc2000 - 0001cc3000] BOOTMEM
[ 0.000000] #23 [0001cc1300 - 0001cc1341] BOOTMEM
[ 0.000000] #24 [0001cc1380 - 0001cc13c3] BOOTMEM
[ 0.000000] #25 [0001cc1400 - 0001cc1668] BOOTMEM
[ 0.000000] #26 [0001cc1680 - 0001cc16e8] BOOTMEM
[ 0.000000] #27 [0001cc1700 - 0001cc1768] BOOTMEM
[ 0.000000] #28 [0001cc1780 - 0001cc17e8] BOOTMEM
[ 0.000000] #29 [0001cc1800 - 0001cc1868] BOOTMEM
[ 0.000000] #30 [0001cc1880 - 0001cc18e8] BOOTMEM
[ 0.000000] #31 [0001cc1900 - 0001cc1968] BOOTMEM
[ 0.000000] #32 [0001cc1980 - 0001cc19e8] BOOTMEM
[ 0.000000] #33 [0001cc1a00 - 0001cc1a68] BOOTMEM
[ 0.000000] #34 [0001cc1a80 - 0001cc1ae8] BOOTMEM
[ 0.000000] #35 [0001cc1b00 - 0001cc1b68] BOOTMEM
[ 0.000000] #36 [0001cc1b80 - 0001cc1bfe] BOOTMEM
[ 0.000000] #37 [0001cc1c00 - 0001cc1c7e] BOOTMEM
[ 0.000000] #38 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #39 [0001e20000 - 0001e3e000] BOOTMEM
[ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM
[ 0.000000] #41 [0001e60000 - 0001e7e000] BOOTMEM
[ 0.000000] #42 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #43 [0001ea0000 - 0001ebe000] BOOTMEM
[ 0.000000] #44 [0001ec0000 - 0001ede000] BOOTMEM
[ 0.000000] #45 [0001ee0000 - 0001efe000] BOOTMEM
[ 0.000000] #46 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #47 [0001f20000 - 0001f3e000] BOOTMEM
[ 0.000000] #48 [0001f40000 - 0001f5e000] BOOTMEM
[ 0.000000] #49 [0001f60000 - 0001f7e000] BOOTMEM
[ 0.000000] #50 [0001f80000 - 0001f9e000] BOOTMEM
[ 0.000000] #51 [0001fa0000 - 0001fbe000] BOOTMEM
[ 0.000000] #52 [0001fc0000 - 0001fde000] BOOTMEM
[ 0.000000] #53 [0001fe0000 - 0001ffe000] BOOTMEM
[ 0.000000] #54 [0001c8ffc0 - 0001c8ffc8] BOOTMEM
[ 0.000000] #55 [0001cc1c80 - 0001cc1c88] BOOTMEM
[ 0.000000] #56 [0001cc1cc0 - 0001cc1d00] BOOTMEM
[ 0.000000] #57 [0001cc1d00 - 0001cc1d80] BOOTMEM
[ 0.000000] #58 [0001cc1d80 - 0001cc1e90] BOOTMEM
[ 0.000000] #59 [0001cc1ec0 - 0001cc1f08] BOOTMEM
[ 0.000000] #60 [0001cc1f40 - 0001cc1f88] BOOTMEM
[ 0.000000] #61 [0001cc3000 - 0001ccb000] BOOTMEM
[ 0.000000] #62 [0002092000 - 0006092000] BOOTMEM
[ 0.000000] #63 [0001ccb000 - 0001ceb000] BOOTMEM
[ 0.000000] #64 [0001ceb000 - 0001d2b000] BOOTMEM
[ 0.000000] #65 [000001f800 - 0000027800] BOOTMEM
[ 0.000000] Memory: 8170276k/9437184k available (5290k kernel code, 1057808k absent, 209100k reserved, 5635k data, 864k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:808
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2808.611 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.22 BogoMIPS (lpj=2808611)
[ 0.000120] pid_max: default: 32768 minimum: 301
[ 0.000310] Security Framework initialized
[ 0.001455] Smack: Initializing.
[ 0.002184] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003883] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004615] Mount-cache hash table entries: 256
[ 0.005557] Initializing cgroup subsys ns
[ 0.005619] Initializing cgroup subsys cpuacct
[ 0.005681] Initializing cgroup subsys memory
[ 0.005815] Initializing cgroup subsys devices
[ 0.005879] Initializing cgroup subsys freezer
[ 0.005939] Initializing cgroup subsys net_cls
[ 0.006079] CPU: Physical Processor ID: 0
[ 0.006135] CPU: Processor Core ID: 0
[ 0.006192] mce: CPU supports 9 MCE banks
[ 0.006259] CPU0: Thermal monitoring enabled (TM1)
[ 0.006320] using mwait in idle threads.
[ 0.006375] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.006549] ... version: 3
[ 0.006604] ... bit width: 48
[ 0.006659] ... generic registers: 4
[ 0.006714] ... value mask: 0000ffffffffffff
[ 0.006771] ... max period: 000000007fffffff
[ 0.006829] ... fixed-purpose events: 3
[ 0.006883] ... event mask: 000000070000000f
[ 0.007650] ACPI: Core revision 20100428
[ 0.239344] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.239406] ftrace: allocating 19705 entries in 78 pages
[ 0.245535] Setting APIC routing to physical flat
[ 0.245975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.256019] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.364039] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
[ 1.011981] Brought up 8 CPUs
[ 1.012084] Total of 8 processors activated (44933.51 BogoMIPS).
[ 1.016118] devtmpfs: initialized
[ 1.017762] regulator: core version 0.5
[ 1.017870] Time: 21:35:28 Date: 07/06/10
[ 1.018185] NET: Registered protocol family 16
[ 1.019301] ACPI: bus type pci registered
[ 1.019737] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.019816] PCI: not using MMCONFIG
[ 1.019875] PCI: Using configuration type 1 for base access
[ 1.028706] bio: create slab <bio-0> at 0
[ 1.032137] ACPI: EC: Look up EC in DSDT
[ 1.036471] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.387013] swapper:1 freeing invalid memtype bf788000-bf789000
[ 1.387409] swapper:1 freeing invalid memtype bf789000-bf78a000
[ 1.387745] ACPI: SSDT 00000000bf7880c0 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.396389] ACPI: Dynamic OEM Table Load:
[ 1.396513] ACPI: SSDT (null) 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.398312] ACPI: SSDT 00000000bf78a300 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.401699] ACPI: Dynamic OEM Table Load:
[ 1.401822] ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.404008] ACPI: Interpreter enabled
[ 1.404064] ACPI: (supports S0 S1 S3 S5)
[ 1.404502] ACPI: Using IOAPIC for interrupt routing
[ 1.404809] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.427771] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.611731] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.613624] ACPI: No dock devices found.
[ 1.613680] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.619027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.622572] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.622640] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.622706] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.622790] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.622872] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.622953] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.623140] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.623143] pci 0000:00:03.0: PME# disabled
[ 1.623488] pci 0000:00:1a.0: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
[ 1.623537] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.623541] pci 0000:00:1a.0: PME# disabled
[ 1.623584] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 1.623627] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.623630] pci 0000:00:1b.0: PME# disabled
[ 1.623708] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.623711] pci 0000:00:1c.0: PME# disabled
[ 1.623804] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.623807] pci 0000:00:1c.5: PME# disabled
[ 1.623890] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.623894] pci 0000:00:1c.6: PME# disabled
[ 1.623975] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.623978] pci 0000:00:1c.7: PME# disabled
[ 1.624031] pci 0000:00:1d.0: reg 10: [mem 0xf7ffd000-0xf7ffd3ff]
[ 1.624081] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.624084] pci 0000:00:1d.0: PME# disabled
[ 1.624279] pci 0000:00:1f.2: reg 10: [io 0xa880-0xa887]
[ 1.624284] pci 0000:00:1f.2: reg 14: [io 0xa800-0xa803]
[ 1.624288] pci 0000:00:1f.2: reg 18: [io 0xa480-0xa487]
[ 1.624293] pci 0000:00:1f.2: reg 1c: [io 0xa400-0xa403]
[ 1.624298] pci 0000:00:1f.2: reg 20: [io 0xa080-0xa09f]
[ 1.624303] pci 0000:00:1f.2: reg 24: [mem 0xf7ff7000-0xf7ff77ff]
[ 1.624331] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.624334] pci 0000:00:1f.2: PME# disabled
[ 1.624374] pci 0000:00:1f.3: reg 10: [mem 0xf7ffc000-0xf7ffc0ff 64bit]
[ 1.624385] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
[ 1.624478] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 1.624486] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.624493] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 1.624498] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 1.624503] pci 0000:01:00.0: reg 30: [mem 0xfb980000-0xfb9fffff pref]
[ 1.624541] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 1.624600] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 1.624603] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb9fffff]
[ 1.624607] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.624698] pci 0000:05:00.0: reg 10: [mem 0xfbbe0000-0xfbbfffff]
[ 1.624759] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.624763] pci 0000:05:00.0: PME# disabled
[ 1.624800] pci 0000:00:1c.0: PCI bridge to [bus 05-0a]
[ 1.624861] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 1.624864] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbdfffff]
[ 1.624869] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.625047] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 1.625051] pci 0000:06:01.0: PME# disabled
[ 1.625176] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
[ 1.625180] pci 0000:06:05.0: PME# disabled
[ 1.625303] pci 0000:06:07.0: PME# supported from D0 D3hot D3cold
[ 1.625306] pci 0000:06:07.0: PME# disabled
[ 1.625429] pci 0000:06:09.0: PME# supported from D0 D3hot D3cold
[ 1.625433] pci 0000:06:09.0: PME# disabled
[ 1.625478] pci 0000:05:00.0: PCI bridge to [bus 06-0a]
[ 1.625540] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
[ 1.625544] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbdfffff]
[ 1.625551] pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.625688] pci 0000:07:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[ 1.625789] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 1.625794] pci 0000:07:00.0: PME# disabled
[ 1.625823] pci 0000:06:01.0: PCI bridge to [bus 07-07]
[ 1.625886] pci 0000:06:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.625890] pci 0000:06:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.625896] pci 0000:06:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626024] pci 0000:08:00.0: reg 10: [io 0xdc00-0xdc07]
[ 1.626032] pci 0000:08:00.0: reg 14: [io 0xd880-0xd883]
[ 1.626039] pci 0000:08:00.0: reg 18: [io 0xd800-0xd807]
[ 1.626047] pci 0000:08:00.0: reg 1c: [io 0xd480-0xd483]
[ 1.626054] pci 0000:08:00.0: reg 20: [io 0xd400-0xd40f]
[ 1.626062] pci 0000:08:00.0: reg 24: [mem 0xfbdff800-0xfbdfffff]
[ 1.626070] pci 0000:08:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
[ 1.626114] pci 0000:08:00.0: PME# supported from D3hot
[ 1.626119] pci 0000:08:00.0: PME# disabled
[ 1.626135] pci 0000:06:05.0: PCI bridge to [bus 08-08]
[ 1.626197] pci 0000:06:05.0: bridge window [io 0xd000-0xdfff]
[ 1.626202] pci 0000:06:05.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.626208] pci 0000:06:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626285] pci 0000:06:07.0: PCI bridge to [bus 09-09]
[ 1.626347] pci 0000:06:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626352] pci 0000:06:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.626358] pci 0000:06:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626435] pci 0000:06:09.0: PCI bridge to [bus 0a-0a]
[ 1.626497] pci 0000:06:09.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626501] pci 0000:06:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.626508] pci 0000:06:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626588] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.626647] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626650] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.626655] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626804] pci 0000:03:00.0: reg 24: [mem 0xfbafe000-0xfbafffff]
[ 1.626851] pci 0000:03:00.0: PME# supported from D3hot
[ 1.626856] pci 0000:03:00.0: PME# disabled
[ 1.626917] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.626926] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
[ 1.626934] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
[ 1.626942] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.626950] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.627007] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 1.627066] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 1.627069] pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.627074] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627127] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 1.627186] pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
[ 1.627190] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.627195] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627269] pci 0000:0b:02.0: reg 10: [io 0xe800-0xe8ff]
[ 1.627275] pci 0000:0b:02.0: reg 14: [mem 0xfbeffc00-0xfbeffcff]
[ 1.627299] pci 0000:0b:02.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 1.627316] pci 0000:0b:02.0: supports D1 D2
[ 1.627317] pci 0000:0b:02.0: PME# supported from D1 D2 D3hot D3cold
[ 1.627321] pci 0000:0b:02.0: PME# disabled
[ 1.627360] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[ 1.627422] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.627425] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.627430] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627441] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.627451] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.627461] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.627471] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.627481] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.627491] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.627531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.635610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 1.638553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 1.639831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 1.641712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 1.643034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 2.042605] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 2.043780] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 2.044680] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 2.045864] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 2.047044] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 2.048319] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 2.049510] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 2.050739] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 2.051919] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.052044] vgaarb: loaded
[ 2.053343] SCSI subsystem initialized
[ 2.053782] libata version 3.00 loaded.
[ 2.054258] usbcore: registered new interface driver usbfs
[ 2.054432] usbcore: registered new interface driver hub
[ 2.054590] usbcore: registered new device driver usb
[ 2.055685] ACPI: WMI: Mapper loaded
[ 2.055740] PCI: Using ACPI for IRQ routing
[ 2.055795] PCI: pci_cache_line_size set to 64 bytes
[ 2.056173] reserve RAM buffer: 000000000009c800 - 000000000009ffff
[ 2.056180] reserve RAM buffer: 00000000bf770000 - 00000000bfffffff
[ 2.056929] NetLabel: Initializing
[ 2.056984] NetLabel: domain hash size = 128
[ 2.057039] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.057184] NetLabel: unlabeled traffic allowed by default
[ 2.057446] alloc irq_desc for 40 on node 0
[ 2.057452] alloc kstat_irqs on node 0
[ 2.057464] alloc irq_desc for 41 on node 0
[ 2.057469] alloc kstat_irqs on node 0
[ 2.057480] alloc irq_desc for 42 on node 0
[ 2.057485] alloc kstat_irqs on node 0
[ 2.057495] alloc irq_desc for 43 on node 0
[ 2.057500] alloc kstat_irqs on node 0
[ 2.057512] alloc irq_desc for 44 on node 0
[ 2.057518] alloc kstat_irqs on node 0
[ 2.057523] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 2.057594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 2.057958] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.061157] hpet: hpet2 irq 40 for MSI
[ 2.062232] hpet: hpet3 irq 41 for MSI
[ 2.063356] hpet: hpet4 irq 42 for MSI
[ 2.064348] hpet: hpet5 irq 43 for MSI
[ 2.065279] hpet: hpet6 irq 44 for MSI
[ 2.067476] Switching to clocksource tsc
[ 2.099997] pnp: PnP ACPI init
[ 2.100109] ACPI: bus type pnp registered
[ 2.127466] pnp: PnP ACPI: found 14 devices
[ 2.127522] ACPI: ACPI bus type pnp unregistered
[ 2.127637] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 2.127708] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 2.127778] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 2.127848] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 2.127942] system 00:06: [io 0x0290-0x029f] has been reserved
[ 2.128035] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 2.128104] system 00:07: [io 0x0800-0x087f] has been reserved
[ 2.128173] system 00:07: [io 0x0500-0x057f] has been reserved
[ 2.128242] system 00:07: [io 0x0600-0x0607] has been reserved
[ 2.128311] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.128381] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.128468] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 2.128566] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 2.128666] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.128738] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.128835] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.129018] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.129091] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 2.129164] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 2.129238] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 2.129312] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 2.135805] pci 0000:00:1c.7: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 2.135868] pci 0000:00:1c.7: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 2.135945] pci 0000:00:1c.7: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.136005] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 2.136063] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 2.136124] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb9fffff]
[ 2.136186] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 2.136264] pci 0000:06:01.0: PCI bridge to [bus 07-07]
[ 2.136321] pci 0000:06:01.0: bridge window [io disabled]
[ 2.136383] pci 0000:06:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 2.136449] pci 0000:06:01.0: bridge window [mem pref disabled]
[ 2.136514] pci 0000:06:05.0: PCI bridge to [bus 08-08]
[ 2.136572] pci 0000:06:05.0: bridge window [io 0xd000-0xdfff]
[ 2.136635] pci 0000:06:05.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 2.136697] pci 0000:06:05.0: bridge window [mem pref disabled]
[ 2.136761] pci 0000:06:07.0: PCI bridge to [bus 09-09]
[ 2.136818] pci 0000:06:07.0: bridge window [io disabled]
[ 2.136879] pci 0000:06:07.0: bridge window [mem disabled]
[ 2.136939] pci 0000:06:07.0: bridge window [mem pref disabled]
[ 2.137003] pci 0000:06:09.0: PCI bridge to [bus 0a-0a]
[ 2.137060] pci 0000:06:09.0: bridge window [io disabled]
[ 2.137121] pci 0000:06:09.0: bridge window [mem disabled]
[ 2.137182] pci 0000:06:09.0: bridge window [mem pref disabled]
[ 2.137245] pci 0000:05:00.0: PCI bridge to [bus 06-0a]
[ 2.137304] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
[ 2.137366] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbdfffff]
[ 2.137428] pci 0000:05:00.0: bridge window [mem pref disabled]
[ 2.137496] pci 0000:00:1c.0: PCI bridge to [bus 05-0a]
[ 2.137554] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 2.137615] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbdfffff]
[ 2.137677] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 2.137739] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 2.137796] pci 0000:00:1c.5: bridge window [io disabled]
[ 2.137856] pci 0000:00:1c.5: bridge window [mem disabled]
[ 2.137916] pci 0000:00:1c.5: bridge window [mem pref disabled]
[ 2.137978] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 2.138036] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 2.138097] pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff]
[ 2.139233] pci 0000:00:1c.6: bridge window [mem pref disabled]
[ 2.139295] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 2.139353] pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
[ 2.139414] pci 0000:00:1c.7: bridge window [mem 0xc0000000-0xc01fffff]
[ 2.139479] pci 0000:00:1c.7: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 2.139558] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[ 2.139616] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 2.139677] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 2.139739] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.139813] alloc irq_desc for 16 on node -1
[ 2.139821] alloc kstat_irqs on node -1
[ 2.139837] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.139899] pci 0000:00:03.0: setting latency timer to 64
[ 2.139912] alloc irq_desc for 17 on node -1
[ 2.139919] alloc kstat_irqs on node -1
[ 2.139935] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.139996] pci 0000:00:1c.0: setting latency timer to 64
[ 2.140004] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.140067] pci 0000:05:00.0: setting latency timer to 64
[ 2.140076] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.140138] pci 0000:06:01.0: setting latency timer to 64
[ 2.140147] pci 0000:06:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.140209] pci 0000:06:05.0: setting latency timer to 64
[ 2.140224] alloc irq_desc for 19 on node -1
[ 2.140232] alloc kstat_irqs on node -1
[ 2.140247] pci 0000:06:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.140310] pci 0000:06:07.0: setting latency timer to 64
[ 2.140318] pci 0000:06:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.140381] pci 0000:06:09.0: setting latency timer to 64
[ 2.140388] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.140453] pci 0000:00:1c.5: setting latency timer to 64
[ 2.140466] alloc irq_desc for 18 on node -1
[ 2.140476] alloc kstat_irqs on node -1
[ 2.140491] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.140553] pci 0000:00:1c.6: setting latency timer to 64
[ 2.140559] pci 0000:00:1c.7: enabling device (0104 -> 0107)
[ 2.140619] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.140680] pci 0000:00:1c.7: setting latency timer to 64
[ 2.140686] pci 0000:00:1e.0: setting latency timer to 64
[ 2.140689] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.140690] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.140692] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.140694] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 2.140695] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 2.140697] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 2.140699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 2.140700] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb9fffff]
[ 2.140702] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 2.140704] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 2.140706] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbdfffff]
[ 2.140707] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 2.140709] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbdfffff]
[ 2.140711] pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 2.140712] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 2.140714] pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 2.140716] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 2.140717] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 2.140719] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 2.140721] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 2.140722] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 2.140724] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
[ 2.140726] pci_bus 0000:0b: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 2.140727] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
[ 2.140729] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
[ 2.140730] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.140732] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000dffff]
[ 2.140734] pci_bus 0000:0b: resource 8 [mem 0xc0000000-0xdfffffff]
[ 2.140735] pci_bus 0000:0b: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 2.140824] NET: Registered protocol family 2
[ 2.141146] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.142530] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.144876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.145201] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.145262] TCP reno registered
[ 2.145350] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.145495] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.146369] NET: Registered protocol family 1
[ 2.146672] pci 0000:01:00.0: Boot video device
[ 2.146788] PCI: CLS 32 bytes, default 64
[ 2.147038] Trying to unpack rootfs image as initramfs...
[ 2.385122] Freeing initrd memory: 13348k freed
[ 2.386915] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.386979] Placing 64MB software IO TLB between ffff880002092000 - ffff880006092000
[ 2.387054] software IO TLB at phys 0x2092000 - 0x6092000
[ 2.392538] Scanning for low memory corruption every 60 seconds
[ 2.392999] audit: initializing netlink socket (disabled)
[ 2.393111] type=2000 audit(1278452129.944:1): initialized
[ 2.399800] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.412662] VFS: Disk quotas dquot_6.5.2
[ 2.412964] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.417599] fuse init (API version 7.14)
[ 2.418378] msgmni has been set to 15983
[ 2.419463] alg: No test for stdrng (krng)
[ 2.419821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.419897] io scheduler noop registered
[ 2.419952] io scheduler deadline registered
[ 2.420239] io scheduler cfq registered (default)
[ 2.421037] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.421073] alloc irq_desc for 45 on node -1
[ 2.421082] alloc kstat_irqs on node -1
[ 2.421113] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
[ 2.421489] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.421531] alloc irq_desc for 46 on node -1
[ 2.421540] alloc kstat_irqs on node -1
[ 2.421554] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
[ 2.421775] pcieport 0000:00:1c.5: setting latency timer to 64
[ 2.421817] alloc irq_desc for 47 on node -1
[ 2.421826] alloc kstat_irqs on node -1
[ 2.421839] pcieport 0000:00:1c.5: irq 47 for MSI/MSI-X
[ 2.422062] pcieport 0000:00:1c.6: setting latency timer to 64
[ 2.422110] alloc irq_desc for 48 on node -1
[ 2.422122] alloc kstat_irqs on node -1
[ 2.422135] pcieport 0000:00:1c.6: irq 48 for MSI/MSI-X
[ 2.422359] pcieport 0000:00:1c.7: setting latency timer to 64
[ 2.422401] alloc irq_desc for 49 on node -1
[ 2.422410] alloc kstat_irqs on node -1
[ 2.422423] pcieport 0000:00:1c.7: irq 49 for MSI/MSI-X
[ 2.422810] pcieport 0000:05:00.0: setting latency timer to 64
[ 2.422866] alloc irq_desc for 50 on node -1
[ 2.422875] alloc kstat_irqs on node -1
[ 2.422891] pcieport 0000:05:00.0: irq 50 for MSI/MSI-X
[ 2.423296] pcieport 0000:06:01.0: setting latency timer to 64
[ 2.423352] alloc irq_desc for 51 on node -1
[ 2.423361] alloc kstat_irqs on node -1
[ 2.423379] pcieport 0000:06:01.0: irq 51 for MSI/MSI-X
[ 2.423778] pcieport 0000:06:05.0: setting latency timer to 64
[ 2.423834] alloc irq_desc for 52 on node -1
[ 2.423843] alloc kstat_irqs on node -1
[ 2.423859] pcieport 0000:06:05.0: irq 52 for MSI/MSI-X
[ 2.424267] pcieport 0000:06:07.0: setting latency timer to 64
[ 2.424323] alloc irq_desc for 53 on node -1
[ 2.424332] alloc kstat_irqs on node -1
[ 2.424348] pcieport 0000:06:07.0: irq 53 for MSI/MSI-X
[ 2.424749] pcieport 0000:06:09.0: setting latency timer to 64
[ 2.424805] alloc irq_desc for 54 on node -1
[ 2.424814] alloc kstat_irqs on node -1
[ 2.424830] pcieport 0000:06:09.0: irq 54 for MSI/MSI-X
[ 2.425317] Firmware did not grant requested _OSC control
[ 2.425319] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.425448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.425580] Firmware did not grant requested _OSC control
[ 2.425735] Firmware did not grant requested _OSC control
[ 2.425785] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.426698] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.426776] ACPI: Power Button [PWRB]
[ 2.427277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.427353] ACPI: Power Button [PWRF]
[ 2.431175] ACPI: acpi_idle registered with cpuidle
[ 2.434055] Monitor-Mwait will be used to enter C-1 state
[ 2.434111] Monitor-Mwait will be used to enter C-2 state
[ 2.434160] Monitor-Mwait will be used to enter C-3 state
[ 2.512624] Linux agpgart interface v0.103
[ 2.512762] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.525333] brd: module loaded
[ 2.530689] loop: module loaded
[ 2.532072] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 2.532137] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.532316] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 2.532337] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 2.535261] Fixed MDIO Bus: probed
[ 2.535575] tun: Universal TUN/TAP device driver, 1.6
[ 2.535632] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
[ 2.536262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.536381] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.536492] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.536495] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.537014] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.537181] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.541119] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 2.541243] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffe000
[ 2.550929] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.552193] hub 1-0:1.0: USB hub found
[ 2.552313] hub 1-0:1.0: 2 ports detected
[ 2.553090] alloc irq_desc for 23 on node -1
[ 2.553099] alloc kstat_irqs on node -1
[ 2.553118] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.553217] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.553220] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.553678] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.553832] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.557756] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 2.557866] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ffd000
[ 2.567896] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.569092] hub 2-0:1.0: USB hub found
[ 2.569212] hub 2-0:1.0: 2 ports detected
[ 2.570050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.570181] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.570786] PNP: No PS/2 controller found. Probing ports directly.
[ 2.574049] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.574123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.574603] mice: PS/2 mouse device common for all mice
[ 2.575129] rtc_cmos 00:03: RTC can wake from S4
[ 2.575561] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.575669] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.576275] device-mapper: uevent: version 1.0.3
[ 2.576650] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@...hat.com
[ 2.577137] device-mapper: multipath: version 1.1.1 loaded
[ 2.577200] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.580868] cpuidle: using governor ladder
[ 2.584691] cpuidle: using governor menu
[ 2.585026] TCP cubic registered
[ 2.585986] NET: Registered protocol family 10
[ 2.587662] lo: Disabled Privacy Extensions
[ 2.588010] NET: Registered protocol family 17
[ 2.683464] kmemleak: Kernel memory leak detector initialized
[ 2.683466] kmemleak: Automatic memory scanning thread started
[ 2.684667] Magic number: 2:713:600
[ 2.685080] rtc_cmos 00:03: setting system clock to 2010-07-06 21:35:29 UTC (1278452129)
[ 2.685157] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.685215] EDD information not available.
[ 2.685870] Freeing unused kernel memory: 864k freed
[ 2.686032] Write protecting the kernel read-only data: 10240k
[ 2.686968] Freeing unused kernel memory: 832k freed
[ 2.687683] Freeing unused kernel memory: 1968k freed
[ 2.747460] udev: starting version 151
[ 2.855363] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.869720] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.869952] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.870325] scsi0 : pata_jmicron
[ 2.871324] scsi1 : pata_jmicron
[ 2.879906] ahci 0000:00:1f.2: version 3.0
[ 2.879931] alloc irq_desc for 21 on node -1
[ 2.879942] alloc kstat_irqs on node -1
[ 2.879964] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 2.880161] alloc irq_desc for 55 on node -1
[ 2.880170] alloc kstat_irqs on node -1
[ 2.880184] ahci 0000:00:1f.2: irq 55 for MSI/MSI-X
[ 2.880266] ahci: SSS flag set, parallel bus scan disabled
[ 2.882864] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.882958] r8169 0000:0b:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.883122] r8169 0000:0b:02.0: (unregistered net_device): no PCI Express capability
[ 2.884475] r8169 0000:0b:02.0: eth0: RTL8169sb/8110sb at 0xffffc9001181cc00, 00:27:19:b2:0e:4b, XID 10000000 IRQ 17
[ 2.888241] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 2.888309] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 2.891419] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.891498] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[ 2.891580] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.904931] scsi2 : ahci
[ 2.905800] scsi3 : ahci
[ 2.906646] scsi4 : ahci
[ 2.907488] scsi5 : ahci
[ 2.908307] scsi6 : ahci
[ 2.909139] scsi7 : ahci
[ 2.914475] ata3: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7100 irq 55
[ 2.914551] ata4: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7180 irq 55
[ 2.914627] ata5: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7200 irq 55
[ 2.914702] ata6: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7280 irq 55
[ 2.914777] ata7: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7300 irq 55
[ 2.914852] ata8: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7380 irq 55
[ 2.915036] ahci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.915300] alloc irq_desc for 56 on node -1
[ 2.915309] alloc kstat_irqs on node -1
[ 2.915350] ahci 0000:08:00.0: irq 56 for MSI/MSI-X
[ 2.915496] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.915574] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.915653] ahci 0000:08:00.0: setting latency timer to 64
[ 2.915673] ahci 0000:08:00.0: The port is not capable of FBS
[ 2.915776] ahci 0000:08:00.0: The port is not capable of FBS
[ 2.916075] scsi8 : ahci
[ 2.916878] scsi9 : ahci
[ 2.917585] ata9: SATA max UDMA/133 abar m2048@...bdff800 port 0xfbdff900 irq 56
[ 2.917661] ata10: SATA max UDMA/133 abar m2048@...bdff800 port 0xfbdff980 irq 56
[ 2.918968] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.930259] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.930447] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.930512] ahci 0000:03:00.0: setting latency timer to 64
[ 2.931016] scsi10 : ahci
[ 2.931882] scsi11 : ahci
[ 2.933996] ata11: SATA max UDMA/133 abar m8192@...bafe000 port 0xfbafe100 irq 18
[ 2.934073] ata12: SATA max UDMA/133 abar m8192@...bafe000 port 0xfbafe180 irq 18
[ 2.972068] hub 1-1:1.0: USB hub found
[ 2.972389] hub 1-1:1.0: 6 ports detected
[ 3.075048] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.204405] hub 2-1:1.0: USB hub found
[ 3.204552] hub 2-1:1.0: 8 ports detected
[ 3.219815] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.225819] ata10: SATA link down (SStatus 0 SControl 370)
[ 3.239848] ata12: SATA link down (SStatus 0 SControl 300)
[ 3.239861] ata11: SATA link down (SStatus 0 SControl 300)
[ 3.376562] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 370)
[ 3.376918] ata9.00: FORCE: horkage modified (noncq)
[ 3.377030] ata9.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 3.377104] ata9.00: 156301488 sectors, multi 1: LBA48 NCQ (not used)
[ 3.377636] ata9.00: configured for UDMA/133
[ 3.480588] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
[ 3.537265] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.592811] usbcore: registered new interface driver hiddev
[ 3.595647] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[ 3.596802] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-1.3/input0
[ 3.600643] generic-usb 0003:046D:C049.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-1.3/input1
[ 3.600860] usbcore: registered new interface driver usbhid
[ 3.600923] usbhid: USB HID core driver
[ 3.635347] usb 2-1.5: new low speed USB device using ehci_hcd and address 4
[ 3.737171] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
[ 3.738363] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input0
[ 3.748931] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input4
[ 3.750192] generic-usb 0003:046D:C30F.0004: input,hidraw3: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input1
[ 3.813099] usb 2-1.6: new high speed USB device using ehci_hcd and address 5
[ 3.899546] hub 2-1.6:1.0: USB hub found
[ 3.899848] hub 2-1.6:1.0: 3 ports detected
[ 4.005497] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.005993] ata5.00: FORCE: horkage modified (noncq)
[ 4.006065] ata5.00: ATAPI: ATAPI iHAS120 6, 7L0E, max UDMA/100
[ 4.007276] ata5.00: configured for UDMA/100
[ 4.020183] scsi 4:0:0:0: CD-ROM ATAPI iHAS120 6 7L0E PQ: 0 ANSI: 5
[ 4.026667] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.026750] Uniform CD-ROM driver Revision: 3.20
[ 4.029053] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.029870] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 4.174469] usb 2-1.6.1: new high speed USB device using ehci_hcd and address 6
[ 4.261021] hub 2-1.6.1:1.0: USB hub found
[ 4.261286] hub 2-1.6.1:1.0: 3 ports detected
[ 4.334988] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.535814] usb 2-1.6.1.1: new high speed USB device using ehci_hcd and address 7
[ 4.650455] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.965888] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.977607] scsi 8:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 4.978814] sd 8:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.979391] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 4.979571] sd 8:0:0:0: [sda] Write Protect is off
[ 4.979633] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.979949] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.981505] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 4.987364] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5.052727] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.296235] Adding 1986556k swap on /dev/sda6. Priority:-1 extents:1 across:1986556k SSD
[ 5.311612] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 5.356893] udev: starting version 151
[ 5.501727] [drm] Initialized drm 1.1.0 20060810
[ 5.515402] ATK0110 ATK0110:00: EC enabled
[ 5.703197] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.703203] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.709329] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0300b1)
[ 5.714921] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
[ 5.714924] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 5.714926] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 5.788982] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 5.788986] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.788989] [drm] nouveau 0000:01:00.0: Bios version 62.00.59.00
[ 5.788991] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 5.788994] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 5.788997] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028
[ 5.789000] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00020030
[ 5.789002] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
[ 5.789004] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 5.789006] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c023
[ 5.789009] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 5.789011] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 5.789014] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 5.789016] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 5.789019] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 5.789021] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 5.789024] [drm] nouveau 0000:01:00.0: 5: 0x00000360: type 0x60 idx 5 tag 0xff
[ 5.789032] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD113
[ 5.808604] alloc irq_desc for 22 on node -1
[ 5.808614] alloc kstat_irqs on node -1
[ 5.808639] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.808747] alloc irq_desc for 57 on node -1
[ 5.808756] alloc kstat_irqs on node -1
[ 5.808771] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 5.808897] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.821206] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD53E
[ 5.825571] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9DB
[ 5.825579] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAB8
[ 5.827533] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB8A
[ 5.827536] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBEF
[ 5.849833] [drm] nouveau 0000:01:00.0: 0xEBEF: Condition still not met after 20ms, skipping following opcodes
[ 5.849842] [drm] nouveau 0000:01:00.0: 0xC0A4: parsing output script 0
[ 5.849847] [drm] nouveau 0000:01:00.0: 0xC0A4: parsing output script 0
[ 5.849850] [drm] nouveau 0000:01:00.0: 0xA642: parsing output script 0
[ 5.849860] [drm] nouveau 0000:01:00.0: Detected 896MiB VRAM
[ 5.852999] r8169 0000:0b:02.0: eth0: link down
[ 5.853784] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.963154] r8169 0000:0b:02.0: eth0: link up
[ 5.963726] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.999209] [TTM] Zone kernel: Available graphics memory: 4093644 kiB.
[ 5.999211] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 5.999213] [TTM] Initializing pool allocator.
[ 5.999675] modprobe:548 freeing invalid memtype d0000000-d0040000
[ 6.068037] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 6.068071] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.068347] modprobe:548 freeing invalid memtype d0140000-d0150000
[ 6.068647] modprobe:548 freeing invalid memtype d0150000-d0160000
[ 6.068890] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 6.069661] modprobe:548 freeing invalid memtype d0170000-d01f0000
[ 6.085378] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 6.085969] modprobe:548 freeing invalid memtype d01f0000-d0200000
[ 6.087673] modprobe:548 freeing invalid memtype d0210000-d0220000
[ 6.087900] modprobe:548 freeing invalid memtype d0220000-d0230000
[ 6.088092] modprobe:548 freeing invalid memtype d0230000-d0240000
[ 6.088317] modprobe:548 freeing invalid memtype d0240000-d0250000
[ 6.088448] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 6.088467] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 6.088483] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 6.088498] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 6.088510] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 6.088512] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 6.089005] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 6.089561] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 6.089579] [drm] nouveau 0000:01:00.0: no encoders, ignoring
[ 6.089587] [drm] nouveau 0000:01:00.0: Detected a HDMI connector
[ 6.089618] [drm] nouveau 0000:01:00.0: no encoders, ignoring
[ 6.269539] [drm] nouveau 0000:01:00.0: allocated 2560x1600 fb: 0x40250000, bo ffff88023131fc00
[ 6.270242] fb0: nouveaufb frame buffer device
[ 6.270244] drm: registered panic notifier
[ 6.270247] Slow work thread pool: Starting up
[ 6.270463] Slow work thread pool: Ready
[ 6.270480] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 6.295084] [drm] nouveau 0000:01:00.0: 0xC0A8: parsing output script 1
[ 6.295094] [drm] nouveau 0000:01:00.0: 0xC0A9: parsing output script 2
[ 6.295114] [drm] nouveau 0000:01:00.0: 0xC066: parsing clock script 0
[ 6.295429] [drm] nouveau 0000:01:00.0: 0xB913: parsing clock script 1
[ 6.299516] Console: switching to colour frame buffer device 320x100
--- RC3 ---
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-rc3 (ahendry@...nty) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #6 SMP PREEMPT Tue Jun 22 09:53:25 EST 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3 root=UUID=6b63a9f9-effe-44e3-a29d-95e3d202659a ro libata.force=noncq ramdisk_size=2000000
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
[ 0.000000] BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf770000 (usable)
[ 0.000000] BIOS-e820: 00000000bf770000 - 00000000bf788000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf770 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c800 (usable)
[ 0.000000] modified: 000000000009c800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf770000 (usable)
[ 0.000000] modified: 00000000bf770000 - 00000000bf788000 (ACPI data)
[ 0.000000] modified: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf770000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf770000 page 4k
[ 0.000000] kernel direct mapping tables up to bf770000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ 19000-23000
[ 0.000000] RAMDISK: 372e7000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbb00 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf770100 00064 (v01 032510 XSDT2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf770290 000F4 (v03 032510 FACP2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7704a0 0EDBE (v01 A1513 A1513003 00000003 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf788000 00040
[ 0.000000] ACPI: APIC 00000000bf770390 000CC (v01 032510 APIC2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf770460 0003C (v01 032510 OEMMCFG 20100325 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf788040 00072 (v01 032510 OEMB2140 20100325 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf77f7a0 00038 (v01 032510 OEMHPET 20100325 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf77fa40 00034 (v06 032510 PerfTune 20100325 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf77fa80 000B0 (v01 032510 OEMOSFR 20100325 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf78a960 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880100200000-ffff8801071fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf770
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2094844
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3924 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765864 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1e000 - 1e7ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91072 r8192 d23616 u131072
[ 0.000000] early_res array is doubled to 128 at [1e800 - 1f7ff]
[ 0.000000] pcpu-alloc: s91072 r8192 d23616 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062588
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3 root=UUID=6b63a9f9-effe-44e3-a29d-95e3d202659a ro libata.force=noncq ramdisk_size=2000000
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (66 early reservations)
[ 0.000000] #1 [0001000000 - 0001c8fe14] TEXT DATA BSS
[ 0.000000] #2 [00372e7000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001c90000 - 0001c902c4] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009c800 - 00000f1310] BIOS reserved
[ 0.000000] #7 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #12 [0000019000 - 000001e000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [0001c90300 - 0001c91300] BOOTMEM
[ 0.000000] #15 [0002091300 - 0002091900] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0107200000] MEMMAP 0
[ 0.000000] #19 [0001c8fe40 - 0001c8ffc0] BOOTMEM
[ 0.000000] #20 [0001c91300 - 0001ca9300] BOOTMEM
[ 0.000000] #21 [0001ca9300 - 0001cc1300] BOOTMEM
[ 0.000000] #22 [0001cc2000 - 0001cc3000] BOOTMEM
[ 0.000000] #23 [0001cc1300 - 0001cc1341] BOOTMEM
[ 0.000000] #24 [0001cc1380 - 0001cc13c3] BOOTMEM
[ 0.000000] #25 [0001cc1400 - 0001cc1668] BOOTMEM
[ 0.000000] #26 [0001cc1680 - 0001cc16e8] BOOTMEM
[ 0.000000] #27 [0001cc1700 - 0001cc1768] BOOTMEM
[ 0.000000] #28 [0001cc1780 - 0001cc17e8] BOOTMEM
[ 0.000000] #29 [0001cc1800 - 0001cc1868] BOOTMEM
[ 0.000000] #30 [0001cc1880 - 0001cc18e8] BOOTMEM
[ 0.000000] #31 [0001cc1900 - 0001cc1968] BOOTMEM
[ 0.000000] #32 [0001cc1980 - 0001cc19e8] BOOTMEM
[ 0.000000] #33 [0001cc1a00 - 0001cc1a68] BOOTMEM
[ 0.000000] #34 [0001cc1a80 - 0001cc1ae8] BOOTMEM
[ 0.000000] #35 [0001cc1b00 - 0001cc1b68] BOOTMEM
[ 0.000000] #36 [0001cc1b80 - 0001cc1bfe] BOOTMEM
[ 0.000000] #37 [0001cc1c00 - 0001cc1c7e] BOOTMEM
[ 0.000000] #38 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #39 [0001e20000 - 0001e3e000] BOOTMEM
[ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM
[ 0.000000] #41 [0001e60000 - 0001e7e000] BOOTMEM
[ 0.000000] #42 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #43 [0001ea0000 - 0001ebe000] BOOTMEM
[ 0.000000] #44 [0001ec0000 - 0001ede000] BOOTMEM
[ 0.000000] #45 [0001ee0000 - 0001efe000] BOOTMEM
[ 0.000000] #46 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #47 [0001f20000 - 0001f3e000] BOOTMEM
[ 0.000000] #48 [0001f40000 - 0001f5e000] BOOTMEM
[ 0.000000] #49 [0001f60000 - 0001f7e000] BOOTMEM
[ 0.000000] #50 [0001f80000 - 0001f9e000] BOOTMEM
[ 0.000000] #51 [0001fa0000 - 0001fbe000] BOOTMEM
[ 0.000000] #52 [0001fc0000 - 0001fde000] BOOTMEM
[ 0.000000] #53 [0001fe0000 - 0001ffe000] BOOTMEM
[ 0.000000] #54 [0001c8ffc0 - 0001c8ffc8] BOOTMEM
[ 0.000000] #55 [0001cc1c80 - 0001cc1c88] BOOTMEM
[ 0.000000] #56 [0001cc1cc0 - 0001cc1d00] BOOTMEM
[ 0.000000] #57 [0001cc1d00 - 0001cc1d80] BOOTMEM
[ 0.000000] #58 [0001cc1d80 - 0001cc1e90] BOOTMEM
[ 0.000000] #59 [0001cc1ec0 - 0001cc1f08] BOOTMEM
[ 0.000000] #60 [0001cc1f40 - 0001cc1f88] BOOTMEM
[ 0.000000] #61 [0001cc3000 - 0001ccb000] BOOTMEM
[ 0.000000] #62 [0002092000 - 0006092000] BOOTMEM
[ 0.000000] #63 [0001ccb000 - 0001ceb000] BOOTMEM
[ 0.000000] #64 [0001ceb000 - 0001d2b000] BOOTMEM
[ 0.000000] #65 [000001f800 - 0000027800] BOOTMEM
[ 0.000000] Memory: 8170276k/9437184k available (5288k kernel code, 1057808k absent, 209100k reserved, 5636k data, 864k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:808
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2808.675 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.35 BogoMIPS (lpj=2808675)
[ 0.000120] pid_max: default: 32768 minimum: 301
[ 0.000310] Security Framework initialized
[ 0.001602] Smack: Initializing.
[ 0.002376] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004070] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004806] Mount-cache hash table entries: 256
[ 0.005749] Initializing cgroup subsys ns
[ 0.005810] Initializing cgroup subsys cpuacct
[ 0.005872] Initializing cgroup subsys memory
[ 0.006006] Initializing cgroup subsys devices
[ 0.006070] Initializing cgroup subsys freezer
[ 0.006130] Initializing cgroup subsys net_cls
[ 0.006271] CPU: Physical Processor ID: 0
[ 0.006326] CPU: Processor Core ID: 0
[ 0.006384] mce: CPU supports 9 MCE banks
[ 0.006450] CPU0: Thermal monitoring enabled (TM1)
[ 0.006520] using mwait in idle threads.
[ 0.006575] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.006741] ... version: 3
[ 0.006795] ... bit width: 48
[ 0.006850] ... generic registers: 4
[ 0.006906] ... value mask: 0000ffffffffffff
[ 0.006963] ... max period: 000000007fffffff
[ 0.007020] ... fixed-purpose events: 3
[ 0.007075] ... event mask: 000000070000000f
[ 0.007841] ACPI: Core revision 20100428
[ 0.238993] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.239054] ftrace: allocating 19694 entries in 78 pages
[ 0.245186] Setting APIC routing to physical flat
[ 0.245626] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.255997] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.363042] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
[ 1.010985] Brought up 8 CPUs
[ 1.011088] Total of 8 processors activated (44933.64 BogoMIPS).
[ 1.015124] devtmpfs: initialized
[ 1.016774] regulator: core version 0.5
[ 1.016882] Time: 21:37:21 Date: 07/06/10
[ 1.017197] NET: Registered protocol family 16
[ 1.018317] ACPI: bus type pci registered
[ 1.018754] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.018836] PCI: not using MMCONFIG
[ 1.018892] PCI: Using configuration type 1 for base access
[ 1.027730] bio: create slab <bio-0> at 0
[ 1.031216] ACPI: EC: Look up EC in DSDT
[ 1.035596] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.387938] ACPI: SSDT 00000000bf7880c0 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.396627] ACPI: Dynamic OEM Table Load:
[ 1.396751] ACPI: SSDT (null) 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.398559] ACPI: SSDT 00000000bf78a300 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.401976] ACPI: Dynamic OEM Table Load:
[ 1.402100] ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.404318] ACPI: Interpreter enabled
[ 1.404374] ACPI: (supports S0 S1 S3 S5)
[ 1.404811] ACPI: Using IOAPIC for interrupt routing
[ 1.405119] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.428230] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.612048] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.613948] ACPI: No dock devices found.
[ 1.614005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.619325] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.622844] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.622927] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.622995] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.623077] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.623159] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.623241] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.623433] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.623435] pci 0000:00:03.0: PME# disabled
[ 1.623797] pci 0000:00:1a.0: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
[ 1.623858] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.623862] pci 0000:00:1a.0: PME# disabled
[ 1.623907] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 1.623953] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.623956] pci 0000:00:1b.0: PME# disabled
[ 1.624036] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.624039] pci 0000:00:1c.0: PME# disabled
[ 1.624122] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.624125] pci 0000:00:1c.5: PME# disabled
[ 1.624205] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.624208] pci 0000:00:1c.6: PME# disabled
[ 1.624289] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.624292] pci 0000:00:1c.7: PME# disabled
[ 1.624344] pci 0000:00:1d.0: reg 10: [mem 0xf7ffd000-0xf7ffd3ff]
[ 1.624394] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.624397] pci 0000:00:1d.0: PME# disabled
[ 1.624593] pci 0000:00:1f.2: reg 10: [io 0xa880-0xa887]
[ 1.624598] pci 0000:00:1f.2: reg 14: [io 0xa800-0xa803]
[ 1.624602] pci 0000:00:1f.2: reg 18: [io 0xa480-0xa487]
[ 1.624607] pci 0000:00:1f.2: reg 1c: [io 0xa400-0xa403]
[ 1.624612] pci 0000:00:1f.2: reg 20: [io 0xa080-0xa09f]
[ 1.624616] pci 0000:00:1f.2: reg 24: [mem 0xf7ff7000-0xf7ff77ff]
[ 1.624644] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.624647] pci 0000:00:1f.2: PME# disabled
[ 1.624686] pci 0000:00:1f.3: reg 10: [mem 0xf7ffc000-0xf7ffc0ff 64bit]
[ 1.624698] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
[ 1.624790] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 1.624797] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.624805] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 1.624809] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 1.624814] pci 0000:01:00.0: reg 30: [mem 0xfb980000-0xfb9fffff pref]
[ 1.624852] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 1.624912] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 1.624915] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb9fffff]
[ 1.624919] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.625011] pci 0000:05:00.0: reg 10: [mem 0xfbbe0000-0xfbbfffff]
[ 1.625072] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.625075] pci 0000:05:00.0: PME# disabled
[ 1.625102] pci 0000:00:1c.0: PCI bridge to [bus 05-0a]
[ 1.625161] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 1.625164] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbdfffff]
[ 1.625169] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.625346] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 1.625350] pci 0000:06:01.0: PME# disabled
[ 1.625476] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
[ 1.625480] pci 0000:06:05.0: PME# disabled
[ 1.625603] pci 0000:06:07.0: PME# supported from D0 D3hot D3cold
[ 1.625606] pci 0000:06:07.0: PME# disabled
[ 1.625731] pci 0000:06:09.0: PME# supported from D0 D3hot D3cold
[ 1.625735] pci 0000:06:09.0: PME# disabled
[ 1.625780] pci 0000:05:00.0: PCI bridge to [bus 06-0a]
[ 1.625844] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
[ 1.625848] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbdfffff]
[ 1.625855] pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.625994] pci 0000:07:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[ 1.626083] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 1.626088] pci 0000:07:00.0: PME# disabled
[ 1.626116] pci 0000:06:01.0: PCI bridge to [bus 07-07]
[ 1.626178] pci 0000:06:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626182] pci 0000:06:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.626189] pci 0000:06:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626314] pci 0000:08:00.0: reg 10: [io 0xdc00-0xdc07]
[ 1.626322] pci 0000:08:00.0: reg 14: [io 0xd880-0xd883]
[ 1.626329] pci 0000:08:00.0: reg 18: [io 0xd800-0xd807]
[ 1.626337] pci 0000:08:00.0: reg 1c: [io 0xd480-0xd483]
[ 1.626344] pci 0000:08:00.0: reg 20: [io 0xd400-0xd40f]
[ 1.626352] pci 0000:08:00.0: reg 24: [mem 0xfbdff800-0xfbdfffff]
[ 1.626359] pci 0000:08:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
[ 1.626404] pci 0000:08:00.0: PME# supported from D3hot
[ 1.626408] pci 0000:08:00.0: PME# disabled
[ 1.626424] pci 0000:06:05.0: PCI bridge to [bus 08-08]
[ 1.626487] pci 0000:06:05.0: bridge window [io 0xd000-0xdfff]
[ 1.626491] pci 0000:06:05.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.626497] pci 0000:06:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626574] pci 0000:06:07.0: PCI bridge to [bus 09-09]
[ 1.626637] pci 0000:06:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626641] pci 0000:06:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.626647] pci 0000:06:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626725] pci 0000:06:09.0: PCI bridge to [bus 0a-0a]
[ 1.626787] pci 0000:06:09.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626791] pci 0000:06:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.626798] pci 0000:06:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.626879] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.626939] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 1.626942] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.626947] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627086] pci 0000:03:00.0: reg 24: [mem 0xfbafe000-0xfbafffff]
[ 1.627131] pci 0000:03:00.0: PME# supported from D3hot
[ 1.627136] pci 0000:03:00.0: PME# disabled
[ 1.627197] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.627205] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
[ 1.627213] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
[ 1.627221] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.627229] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.627286] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 1.627345] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 1.627348] pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.627353] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627406] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 1.627465] pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
[ 1.627468] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.627473] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627548] pci 0000:0b:02.0: reg 10: [io 0xe800-0xe8ff]
[ 1.627554] pci 0000:0b:02.0: reg 14: [mem 0xfbeffc00-0xfbeffcff]
[ 1.627577] pci 0000:0b:02.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 1.627595] pci 0000:0b:02.0: supports D1 D2
[ 1.627596] pci 0000:0b:02.0: PME# supported from D1 D2 D3hot D3cold
[ 1.627600] pci 0000:0b:02.0: PME# disabled
[ 1.627639] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[ 1.627701] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.627704] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.627709] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.627719] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.627730] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.627740] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.627749] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.627759] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.627770] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.627810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.636142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 1.638955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 1.640215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 1.642241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 1.643577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 2.045761] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 2.046953] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 2.047856] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 2.049033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 2.050228] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 2.051542] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 2.052725] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 2.053920] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 2.055144] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.055271] vgaarb: loaded
[ 2.056424] SCSI subsystem initialized
[ 2.056866] libata version 3.00 loaded.
[ 2.057356] usbcore: registered new interface driver usbfs
[ 2.057530] usbcore: registered new interface driver hub
[ 2.057689] usbcore: registered new device driver usb
[ 2.058796] ACPI: WMI: Mapper loaded
[ 2.058851] PCI: Using ACPI for IRQ routing
[ 2.058906] PCI: pci_cache_line_size set to 64 bytes
[ 2.059302] reserve RAM buffer: 000000000009c800 - 000000000009ffff
[ 2.059309] reserve RAM buffer: 00000000bf770000 - 00000000bfffffff
[ 2.060067] NetLabel: Initializing
[ 2.060121] NetLabel: domain hash size = 128
[ 2.060186] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.060328] NetLabel: unlabeled traffic allowed by default
[ 2.060591] alloc irq_desc for 40 on node 0
[ 2.060596] alloc kstat_irqs on node 0
[ 2.060609] alloc irq_desc for 41 on node 0
[ 2.060614] alloc kstat_irqs on node 0
[ 2.060625] alloc irq_desc for 42 on node 0
[ 2.060630] alloc kstat_irqs on node 0
[ 2.060640] alloc irq_desc for 43 on node 0
[ 2.060645] alloc kstat_irqs on node 0
[ 2.060656] alloc irq_desc for 44 on node 0
[ 2.060661] alloc kstat_irqs on node 0
[ 2.060667] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 2.060737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 2.061101] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.064152] hpet: hpet2 irq 40 for MSI
[ 2.065228] hpet: hpet3 irq 41 for MSI
[ 2.066327] hpet: hpet4 irq 42 for MSI
[ 2.067344] hpet: hpet5 irq 43 for MSI
[ 2.068247] hpet: hpet6 irq 44 for MSI
[ 2.071414] Switching to clocksource tsc
[ 2.103974] pnp: PnP ACPI init
[ 2.104089] ACPI: bus type pnp registered
[ 2.131544] pnp: PnP ACPI: found 14 devices
[ 2.131600] ACPI: ACPI bus type pnp unregistered
[ 2.131713] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 2.131783] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 2.131855] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 2.131926] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 2.132020] system 00:06: [io 0x0290-0x029f] has been reserved
[ 2.132112] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 2.132181] system 00:07: [io 0x0800-0x087f] has been reserved
[ 2.132250] system 00:07: [io 0x0500-0x057f] has been reserved
[ 2.132319] system 00:07: [io 0x0600-0x0607] has been reserved
[ 2.132388] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.132458] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.132546] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 2.132648] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 2.132747] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.132820] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.132917] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.133100] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.133173] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 2.133247] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 2.133321] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 2.133395] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 2.139890] pci 0000:00:1c.7: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 2.139954] pci 0000:00:1c.7: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 2.140031] pci 0000:00:1c.7: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.140092] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 2.140150] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 2.140210] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb9fffff]
[ 2.140272] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 2.140350] pci 0000:06:01.0: PCI bridge to [bus 07-07]
[ 2.140407] pci 0000:06:01.0: bridge window [io disabled]
[ 2.140473] pci 0000:06:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 2.140536] pci 0000:06:01.0: bridge window [mem pref disabled]
[ 2.140600] pci 0000:06:05.0: PCI bridge to [bus 08-08]
[ 2.140658] pci 0000:06:05.0: bridge window [io 0xd000-0xdfff]
[ 2.140721] pci 0000:06:05.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 2.140783] pci 0000:06:05.0: bridge window [mem pref disabled]
[ 2.140847] pci 0000:06:07.0: PCI bridge to [bus 09-09]
[ 2.140903] pci 0000:06:07.0: bridge window [io disabled]
[ 2.140965] pci 0000:06:07.0: bridge window [mem disabled]
[ 2.141025] pci 0000:06:07.0: bridge window [mem pref disabled]
[ 2.141089] pci 0000:06:09.0: PCI bridge to [bus 0a-0a]
[ 2.141146] pci 0000:06:09.0: bridge window [io disabled]
[ 2.141207] pci 0000:06:09.0: bridge window [mem disabled]
[ 2.141267] pci 0000:06:09.0: bridge window [mem pref disabled]
[ 2.141331] pci 0000:05:00.0: PCI bridge to [bus 06-0a]
[ 2.141389] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
[ 2.141452] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbdfffff]
[ 2.141517] pci 0000:05:00.0: bridge window [mem pref disabled]
[ 2.141581] pci 0000:00:1c.0: PCI bridge to [bus 05-0a]
[ 2.141639] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 2.141701] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbdfffff]
[ 2.141762] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 2.141824] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 2.141881] pci 0000:00:1c.5: bridge window [io disabled]
[ 2.141941] pci 0000:00:1c.5: bridge window [mem disabled]
[ 2.142001] pci 0000:00:1c.5: bridge window [mem pref disabled]
[ 2.142063] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 2.142121] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 2.142182] pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff]
[ 2.142244] pci 0000:00:1c.6: bridge window [mem pref disabled]
[ 2.142306] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 2.143438] pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
[ 2.143503] pci 0000:00:1c.7: bridge window [mem 0xc0000000-0xc01fffff]
[ 2.143565] pci 0000:00:1c.7: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 2.143643] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[ 2.143702] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 2.143763] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 2.143825] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.143899] alloc irq_desc for 16 on node -1
[ 2.143907] alloc kstat_irqs on node -1
[ 2.143923] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.143985] pci 0000:00:03.0: setting latency timer to 64
[ 2.143997] alloc irq_desc for 17 on node -1
[ 2.144005] alloc kstat_irqs on node -1
[ 2.144020] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.144082] pci 0000:00:1c.0: setting latency timer to 64
[ 2.144090] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.144152] pci 0000:05:00.0: setting latency timer to 64
[ 2.144161] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.144224] pci 0000:06:01.0: setting latency timer to 64
[ 2.144232] pci 0000:06:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.144294] pci 0000:06:05.0: setting latency timer to 64
[ 2.144309] alloc irq_desc for 19 on node -1
[ 2.144317] alloc kstat_irqs on node -1
[ 2.144333] pci 0000:06:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.144395] pci 0000:06:07.0: setting latency timer to 64
[ 2.144404] pci 0000:06:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.144470] pci 0000:06:09.0: setting latency timer to 64
[ 2.144477] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.144539] pci 0000:00:1c.5: setting latency timer to 64
[ 2.144552] alloc irq_desc for 18 on node -1
[ 2.144560] alloc kstat_irqs on node -1
[ 2.144575] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.144636] pci 0000:00:1c.6: setting latency timer to 64
[ 2.144643] pci 0000:00:1c.7: enabling device (0104 -> 0107)
[ 2.144702] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.144764] pci 0000:00:1c.7: setting latency timer to 64
[ 2.144769] pci 0000:00:1e.0: setting latency timer to 64
[ 2.144772] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.144773] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.144775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.144777] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 2.144778] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 2.144780] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 2.144782] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 2.144783] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb9fffff]
[ 2.144785] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 2.144787] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 2.144788] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbdfffff]
[ 2.144790] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 2.144792] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbdfffff]
[ 2.144793] pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 2.144795] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 2.144796] pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 2.144798] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 2.144800] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 2.144801] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 2.144803] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 2.144805] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 2.144806] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
[ 2.144808] pci_bus 0000:0b: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 2.144810] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
[ 2.144811] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
[ 2.144813] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.144815] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000dffff]
[ 2.144816] pci_bus 0000:0b: resource 8 [mem 0xc0000000-0xdfffffff]
[ 2.144818] pci_bus 0000:0b: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 2.144909] NET: Registered protocol family 2
[ 2.145231] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.146614] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.148964] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.149289] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.149350] TCP reno registered
[ 2.149439] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.149585] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.150464] NET: Registered protocol family 1
[ 2.150762] pci 0000:01:00.0: Boot video device
[ 2.150877] PCI: CLS 32 bytes, default 64
[ 2.151135] Trying to unpack rootfs image as initramfs...
[ 2.389261] Freeing initrd memory: 13348k freed
[ 2.391051] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.391114] Placing 64MB software IO TLB between ffff880002092000 - ffff880006092000
[ 2.391194] software IO TLB at phys 0x2092000 - 0x6092000
[ 2.396695] Scanning for low memory corruption every 60 seconds
[ 2.397163] audit: initializing netlink socket (disabled)
[ 2.397279] type=2000 audit(1278452242.210:1): initialized
[ 2.403884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.416712] VFS: Disk quotas dquot_6.5.2
[ 2.417014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.421592] fuse init (API version 7.14)
[ 2.422409] msgmni has been set to 15983
[ 2.423526] alg: No test for stdrng (krng)
[ 2.423885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.423961] io scheduler noop registered
[ 2.424016] io scheduler deadline registered
[ 2.424300] io scheduler cfq registered (default)
[ 2.425111] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.425151] alloc irq_desc for 45 on node -1
[ 2.425161] alloc kstat_irqs on node -1
[ 2.425175] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
[ 2.425514] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.425554] alloc irq_desc for 46 on node -1
[ 2.425564] alloc kstat_irqs on node -1
[ 2.425576] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
[ 2.425777] pcieport 0000:00:1c.5: setting latency timer to 64
[ 2.425819] alloc irq_desc for 47 on node -1
[ 2.425827] alloc kstat_irqs on node -1
[ 2.425839] pcieport 0000:00:1c.5: irq 47 for MSI/MSI-X
[ 2.426039] pcieport 0000:00:1c.6: setting latency timer to 64
[ 2.426080] alloc irq_desc for 48 on node -1
[ 2.426089] alloc kstat_irqs on node -1
[ 2.426101] pcieport 0000:00:1c.6: irq 48 for MSI/MSI-X
[ 2.426338] pcieport 0000:00:1c.7: setting latency timer to 64
[ 2.426380] alloc irq_desc for 49 on node -1
[ 2.426389] alloc kstat_irqs on node -1
[ 2.426403] pcieport 0000:00:1c.7: irq 49 for MSI/MSI-X
[ 2.426793] pcieport 0000:05:00.0: setting latency timer to 64
[ 2.426849] alloc irq_desc for 50 on node -1
[ 2.426858] alloc kstat_irqs on node -1
[ 2.426874] pcieport 0000:05:00.0: irq 50 for MSI/MSI-X
[ 2.427282] pcieport 0000:06:01.0: setting latency timer to 64
[ 2.427338] alloc irq_desc for 51 on node -1
[ 2.427347] alloc kstat_irqs on node -1
[ 2.427363] pcieport 0000:06:01.0: irq 51 for MSI/MSI-X
[ 2.427766] pcieport 0000:06:05.0: setting latency timer to 64
[ 2.427822] alloc irq_desc for 52 on node -1
[ 2.427831] alloc kstat_irqs on node -1
[ 2.427847] pcieport 0000:06:05.0: irq 52 for MSI/MSI-X
[ 2.428256] pcieport 0000:06:07.0: setting latency timer to 64
[ 2.428311] alloc irq_desc for 53 on node -1
[ 2.428321] alloc kstat_irqs on node -1
[ 2.428337] pcieport 0000:06:07.0: irq 53 for MSI/MSI-X
[ 2.428740] pcieport 0000:06:09.0: setting latency timer to 64
[ 2.428795] alloc irq_desc for 54 on node -1
[ 2.428804] alloc kstat_irqs on node -1
[ 2.428820] pcieport 0000:06:09.0: irq 54 for MSI/MSI-X
[ 2.429309] Firmware did not grant requested _OSC control
[ 2.429311] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.429410] pcieport 0000:00:03.0: Requesting control of PCIe PME from ACPI BIOS
[ 2.429495] Firmware did not grant requested _OSC control
[ 2.429496] pcieport 0000:00:03.0: Failed to receive control of PCIe PME service: no _OSC support
[ 2.429579] pcie_pme: probe of 0000:00:03.0:pcie01 failed with error -13
[ 2.429664] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[ 2.429748] Firmware did not grant requested _OSC control
[ 2.429749] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
[ 2.429831] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[ 2.429916] pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
[ 2.430000] Firmware did not grant requested _OSC control
[ 2.430001] pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
[ 2.430083] pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
[ 2.430172] pcieport 0000:00:1c.6: Requesting control of PCIe PME from ACPI BIOS
[ 2.430256] Firmware did not grant requested _OSC control
[ 2.430258] pcieport 0000:00:1c.6: Failed to receive control of PCIe PME service: no _OSC support
[ 2.430340] pcie_pme: probe of 0000:00:1c.6:pcie01 failed with error -13
[ 2.430425] pcieport 0000:00:1c.7: Requesting control of PCIe PME from ACPI BIOS
[ 2.430508] Firmware did not grant requested _OSC control
[ 2.430510] pcieport 0000:00:1c.7: Failed to receive control of PCIe PME service: no _OSC support
[ 2.430592] pcie_pme: probe of 0000:00:1c.7:pcie01 failed with error -13
[ 2.430777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.430909] Firmware did not grant requested _OSC control
[ 2.431065] Firmware did not grant requested _OSC control
[ 2.431116] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.432030] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.432109] ACPI: Power Button [PWRB]
[ 2.432611] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.432687] ACPI: Power Button [PWRF]
[ 2.436529] ACPI: acpi_idle registered with cpuidle
[ 2.439411] Monitor-Mwait will be used to enter C-1 state
[ 2.439461] Monitor-Mwait will be used to enter C-2 state
[ 2.439510] Monitor-Mwait will be used to enter C-3 state
[ 2.518245] Linux agpgart interface v0.103
[ 2.518383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.530603] brd: module loaded
[ 2.535979] loop: module loaded
[ 2.537362] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 2.537427] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.537605] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 2.537626] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 2.540569] Fixed MDIO Bus: probed
[ 2.540883] tun: Universal TUN/TAP device driver, 1.6
[ 2.540940] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
[ 2.541569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.541688] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.541797] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.541800] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.542316] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.542481] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.546409] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 2.546534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffe000
[ 2.555936] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.557198] hub 1-0:1.0: USB hub found
[ 2.557318] hub 1-0:1.0: 2 ports detected
[ 2.558102] alloc irq_desc for 23 on node -1
[ 2.558111] alloc kstat_irqs on node -1
[ 2.558130] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.558230] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.558232] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.558689] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.558844] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.562771] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 2.562880] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ffd000
[ 2.572903] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.574101] hub 2-0:1.0: USB hub found
[ 2.574221] hub 2-0:1.0: 2 ports detected
[ 2.575062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.575193] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.575799] PNP: No PS/2 controller found. Probing ports directly.
[ 2.578476] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.578549] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.579084] mice: PS/2 mouse device common for all mice
[ 2.579657] rtc_cmos 00:03: RTC can wake from S4
[ 2.580142] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.580253] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.580919] device-mapper: uevent: version 1.0.3
[ 2.581291] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@...hat.com
[ 2.581770] device-mapper: multipath: version 1.1.1 loaded
[ 2.581834] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.585470] cpuidle: using governor ladder
[ 2.589569] cpuidle: using governor menu
[ 2.589916] TCP cubic registered
[ 2.590948] NET: Registered protocol family 10
[ 2.592622] lo: Disabled Privacy Extensions
[ 2.592971] NET: Registered protocol family 17
[ 2.687552] kmemleak: Kernel memory leak detector initialized
[ 2.687554] kmemleak: Automatic memory scanning thread started
[ 2.688737] Magic number: 2:266:651
[ 2.688821] processor LNXCPU:04: hash matches
[ 2.689165] rtc_cmos 00:03: setting system clock to 2010-07-06 21:37:23 UTC (1278452243)
[ 2.689242] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.689300] EDD information not available.
[ 2.689854] Freeing unused kernel memory: 864k freed
[ 2.690014] Write protecting the kernel read-only data: 10240k
[ 2.691268] Freeing unused kernel memory: 836k freed
[ 2.692124] Freeing unused kernel memory: 1968k freed
[ 2.753270] udev: starting version 151
[ 2.858361] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.878704] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.878904] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.879281] scsi0 : pata_jmicron
[ 2.880312] scsi1 : pata_jmicron
[ 2.889717] ahci 0000:00:1f.2: version 3.0
[ 2.889748] alloc irq_desc for 21 on node -1
[ 2.889761] alloc kstat_irqs on node -1
[ 2.889792] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 2.890059] alloc irq_desc for 55 on node -1
[ 2.890073] alloc kstat_irqs on node -1
[ 2.890095] ahci 0000:00:1f.2: irq 55 for MSI/MSI-X
[ 2.890219] ahci: SSS flag set, parallel bus scan disabled
[ 2.895181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.895276] r8169 0000:0b:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.895469] r8169 0000:0b:02.0: (unregistered net_device): no PCI Express capability
[ 2.897385] r8169 0000:0b:02.0: eth0: RTL8169sb/8110sb at 0xffffc9001181cc00, 00:27:19:b2:0e:4b, XID 10000000 IRQ 17
[ 2.900439] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 2.900501] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 2.901314] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.901481] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[ 2.901561] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.911864] scsi2 : ahci
[ 2.912856] scsi3 : ahci
[ 2.913722] scsi4 : ahci
[ 2.914649] scsi5 : ahci
[ 2.915651] scsi6 : ahci
[ 2.916640] scsi7 : ahci
[ 2.921811] ata3: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7100 irq 55
[ 2.923009] ata4: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7180 irq 55
[ 2.923084] ata5: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7200 irq 55
[ 2.923161] ata6: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7280 irq 55
[ 2.923264] ata7: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7300 irq 55
[ 2.923409] ata8: SATA max UDMA/133 abar m2048@...7ff7000 port 0xf7ff7380 irq 55
[ 2.923590] ahci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.924070] alloc irq_desc for 56 on node -1
[ 2.924079] alloc kstat_irqs on node -1
[ 2.924096] ahci 0000:08:00.0: irq 56 for MSI/MSI-X
[ 2.924204] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.924365] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.924445] ahci 0000:08:00.0: setting latency timer to 64
[ 2.924465] ahci 0000:08:00.0: The port is not capable of FBS
[ 2.924567] ahci 0000:08:00.0: The port is not capable of FBS
[ 2.924916] scsi8 : ahci
[ 2.925778] scsi9 : ahci
[ 2.926489] ata9: SATA max UDMA/133 abar m2048@...bdff800 port 0xfbdff900 irq 56
[ 2.926566] ata10: SATA max UDMA/133 abar m2048@...bdff800 port 0xfbdff980 irq 56
[ 2.926714] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.937385] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.937469] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.937533] ahci 0000:03:00.0: setting latency timer to 64
[ 2.938017] scsi10 : ahci
[ 2.938996] scsi11 : ahci
[ 2.941134] ata11: SATA max UDMA/133 abar m8192@...bafe000 port 0xfbafe100 irq 18
[ 2.941216] ata12: SATA max UDMA/133 abar m8192@...bafe000 port 0xfbafe180 irq 18
[ 2.976183] hub 1-1:1.0: USB hub found
[ 2.976392] hub 1-1:1.0: 6 ports detected
[ 3.080003] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.195557] hub 2-1:1.0: USB hub found
[ 3.195742] hub 2-1:1.0: 8 ports detected
[ 3.227987] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.230852] ata10: SATA link down (SStatus 0 SControl 370)
[ 3.244903] ata11: SATA link down (SStatus 0 SControl 300)
[ 3.245902] ata12: SATA link down (SStatus 0 SControl 300)
[ 3.383588] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 370)
[ 3.383925] ata9.00: FORCE: horkage modified (noncq)
[ 3.384039] ata9.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 3.384111] ata9.00: 156301488 sectors, multi 1: LBA48 NCQ (not used)
[ 3.384564] ata9.00: configured for UDMA/133
[ 3.474508] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
[ 3.543230] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.583809] usbcore: registered new interface driver hiddev
[ 3.586494] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[ 3.587844] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-1.3/input0
[ 3.591770] generic-usb 0003:046D:C049.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-1.3/input1
[ 3.591947] usbcore: registered new interface driver usbhid
[ 3.592010] usbhid: USB HID core driver
[ 3.638391] usb 2-1.5: new low speed USB device using ehci_hcd and address 4
[ 3.741328] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
[ 3.742505] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input0
[ 3.752753] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input4
[ 3.753936] generic-usb 0003:046D:C30F.0004: input,hidraw3: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input1
[ 3.826979] usb 2-1.6: new high speed USB device using ehci_hcd and address 5
[ 3.914438] hub 2-1.6:1.0: USB hub found
[ 3.914750] hub 2-1.6:1.0: 3 ports detected
[ 4.011479] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.011825] ata5.00: FORCE: horkage modified (noncq)
[ 4.011900] ata5.00: ATAPI: ATAPI iHAS120 6, 7L0E, max UDMA/100
[ 4.012967] ata5.00: configured for UDMA/100
[ 4.026085] scsi 4:0:0:0: CD-ROM ATAPI iHAS120 6 7L0E PQ: 0 ANSI: 5
[ 4.032552] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.032630] Uniform CD-ROM driver Revision: 3.20
[ 4.033989] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.034632] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 4.190429] usb 2-1.6.1: new high speed USB device using ehci_hcd and address 6
[ 4.279003] hub 2-1.6.1:1.0: USB hub found
[ 4.279307] hub 2-1.6.1:1.0: 3 ports detected
[ 4.339948] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.554836] usb 2-1.6.1.1: new high speed USB device using ehci_hcd and address 7
[ 4.655444] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.971144] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.982574] scsi 8:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 4.983822] sd 8:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.984247] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 4.984522] sd 8:0:0:0: [sda] Write Protect is off
[ 4.984584] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.984923] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.986509] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 4.991388] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5.054755] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.290561] Adding 1986556k swap on /dev/sda6. Priority:-1 extents:1 across:1986556k SSD
[ 5.386863] udev: starting version 151
[ 5.541974] ATK0110 ATK0110:00: EC enabled
[ 5.550346] [drm] Initialized drm 1.1.0 20060810
[ 5.849238] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.849243] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.849948] alloc irq_desc for 22 on node -1
[ 5.849959] alloc kstat_irqs on node -1
[ 5.849979] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.850107] alloc irq_desc for 57 on node -1
[ 5.850116] alloc kstat_irqs on node -1
[ 5.850131] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 5.850259] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.855784] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0300b1)
[ 5.861009] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
[ 5.861012] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 5.861014] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 5.951522] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 5.951526] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.951528] [drm] nouveau 0000:01:00.0: Bios version 62.00.59.00
[ 5.951531] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 5.951533] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 5.951536] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028
[ 5.951538] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00020030
[ 5.951541] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
[ 5.951543] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 5.951545] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c023
[ 5.951548] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 5.951551] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 5.951554] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 5.951556] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 5.951559] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 5.951561] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 5.951564] [drm] nouveau 0000:01:00.0: 5: 0x00000360: type 0x60 idx 5 tag 0xff
[ 5.951571] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD113
[ 5.985103] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD53E
[ 5.989407] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9DB
[ 5.989414] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAB8
[ 5.991393] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB8A
[ 5.991395] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBEF
[ 6.012335] [drm] nouveau 0000:01:00.0: 0xEBEF: Condition still not met after 20ms, skipping following opcodes
[ 6.012342] [drm] nouveau 0000:01:00.0: 0xC0A4: parsing output script 0
[ 6.012345] [drm] nouveau 0000:01:00.0: 0xC0A4: parsing output script 0
[ 6.012347] [drm] nouveau 0000:01:00.0: 0xA642: parsing output script 0
[ 6.012356] [drm] nouveau 0000:01:00.0: Detected 896MiB VRAM
[ 6.159703] [TTM] Zone kernel: Available graphics memory: 4093646 kiB.
[ 6.159705] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 6.159707] [TTM] Initializing pool allocator.
[ 6.228304] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 6.228331] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.229318] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 6.245907] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 6.249298] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 6.249309] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 6.249318] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 6.249327] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 6.249337] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 6.249338] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 6.249917] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 6.250342] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 6.250357] [drm] nouveau 0000:01:00.0: no encoders, ignoring
[ 6.250362] [drm] nouveau 0000:01:00.0: Detected a HDMI connector
[ 6.250381] [drm] nouveau 0000:01:00.0: no encoders, ignoring
[ 6.436005] [drm] nouveau 0000:01:00.0: allocated 2560x1600 fb: 0x40250000, bo ffff8802326e3800
[ 6.436642] fb0: nouveaufb frame buffer device
[ 6.436644] drm: registered panic notifier
[ 6.436647] Slow work thread pool: Starting up
[ 6.436873] Slow work thread pool: Ready
[ 6.436889] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 6.482309] [drm] nouveau 0000:01:00.0: 0xC0A8: parsing output script 1
[ 6.482318] [drm] nouveau 0000:01:00.0: 0xC0A9: parsing output script 2
[ 6.482335] [drm] nouveau 0000:01:00.0: 0xC066: parsing clock script 0
[ 6.482638] [drm] nouveau 0000:01:00.0: 0xB913: parsing clock script 1
[ 6.487104] Console: switching to colour frame buffer device 320x100
[ 25.191004] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
-- lspci --
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f8000000-fb9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40a1
Masking: 00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 83d0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 57
Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee00000 Data: 408a
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=0a, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbb00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40a9
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40b1
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fba00000-fbafffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #7, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40b9
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 87, PowerLimit 25.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40c1
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7ffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 8383
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 55
Region 0: I/O ports at a880 [size=8]
Region 1: I/O ports at a800 [size=4]
Region 2: I/O ports at a480 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a080 [size=32]
Region 5: Memory at f7ff7000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee04000 Data: 406a
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 15
Region 0: Memory at f7ffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ffe0 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 275] (rev a1)
Subsystem: CardExpert Technology Device 0401
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
Expansion ROM at fb980000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device 824f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 5: Memory at fbafe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 824f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron
05:00.0 PCI bridge: PLX Technology, Inc. Device 8608 (rev ba)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Region 0: Memory at fbbe0000 (32-bit, non-prefetchable) [size=128K]
Bus: primary=05, secondary=06, subordinate=0a, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbc00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee00000 Data: 40c9
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Upstream Port, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-SlotPowerLimit 0.000000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8608
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [138] Power Budgeting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [448] Vendor Specific Information <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
06:01.0 PCI bridge: PLX Technology, Inc. Device 8608 (rev ba)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee00000 Data: 40d1
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 71, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8608
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Controls <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
06:05.0 PCI bridge: PLX Technology, Inc. Device 8608 (rev ba)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee00000 Data: 40d9
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 75, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8608
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Controls <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
06:07.0 PCI bridge: PLX Technology, Inc. Device 8608 (rev ba)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee00000 Data: 40e1
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #7, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 77, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8608
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Controls <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
06:09.0 PCI bridge: PLX Technology, Inc. Device 8608 (rev ba)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=06, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable+
Address: 00000000fee00000 Data: 40e9
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #9, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 79, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8608
Capabilities: [100] Device Serial Number 00-0e-df-b5-10-01-86-ba
Capabilities: [fb4] Advanced Error Reporting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Controls <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
07:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device 8413
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fbcfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
08:00.0 SATA controller: Device 1b4b:9123 (rev 10) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device 8400
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 56
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at fbdff800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fbde0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee03000 Data: 4092
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: ahci
Kernel modules: ahci
0b:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbeffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
Kernel modules: r8169
Download attachment "config.gz" of type "application/x-gzip" (20565 bytes)
Powered by blists - more mailing lists