| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <e2d14d0a730dde4b716c0e086761ef65ba9afda8.1278619472.git.m.nazarewicz@samsung.com>
Date: Thu, 08 Jul 2010 22:52:26 +0200
From: Michal Nazarewicz <m.nazarewicz@...sung.com>
To: m.nazarewicz@...sung.com
Cc: mina86@...a86.com, Alan Stern <stern@...land.harvard.edu>,
Greg KH <greg@...ah.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
linux-kernel@...r.kernel.org,
Dries Van Puymbroeck <Dries.VanPuymbroeck@...imo.com>,
David Brownell <dbrownell@...rs.sourceforge.net>,
stable <stable@...nel.org>
Subject: [PATCHv3 1/3] USB: gadget: mass/file storage: set serial number
This commit adds iSerialNumber to all gadgets that use the Mass
Storage Function. It appears that Windows has problems when
it is not set.
Not to copy the same code all over again, a fsg_string_serial_fill()
macro has been added to the storage_common.c file which is now also
used in the File Storage Gadget.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
Reported-by: Dries Van Puymbroeck <Dries.VanPuymbroeck@...imo.com>
Tested-by: Dries Van Puymbroeck <Dries.VanPuymbroeck@...imo.com>
Cc: stable <stable@...nel.org>
---
> On Thu, Jul 01, 2010 at 03:42:19PM +0200, Michal Nazarewicz wrote:
> This patch conflicts with the patch in my tree:
> Subject: USB: Add a serial number parameter to g_file_storage module
>
> So, could you fix the above patch up to play nice with your change so
> that I can accept it?
Sending all 3 patches. The first and last are identical to v2 (only
updated offsets and some such).
The second has been modified as it stopped applying after applying the
first plus there was a bug: the fsg_string_serial was never filled if
CONFIG_USB_FILE_STORAGE_TEST was not defined.
Please also note that David has some concerns about this patch (if I
understood everything correctly). However, I wasn't sure what was the
issue here...
The delta for the second patch is:
> --- drivers/usb/gadget/file_storage.c 2010-07-08 22:19:21.428413976 +0200
> +++ /home/mina86/file_storage.c 2010-07-08 22:17:23.792913751 +0200
> @@ -3315,20 +3315,13 @@
> fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial_parm;
> } else {
> fill_serial:
> - /* Serial number not specified or invalid, make our own.
> - * We just encode it from the driver version string,
> - * 12 characters to comply with both CB[I] and BBB spec.
> - * Warning : Two devices running the same kernel will have
> - * the same fallback serial number. */
> - for (i = 0; i < 12; i += 2) {
> - unsigned char c = DRIVER_VERSION[i / 2];
> -
> - if (!c)
> - break;
> - sprintf(&fsg_string_serial[i], "%02X", c);
> - }
> + fsg_string_serial_fill(fsg_string_serial, DRIVER_VERSION);
> }
>
> +#else /* !CONFIG_USB_FILE_STORAGE_TEST */
> +
> + fsg_string_serial_fill(fsg_string_serial, DRIVER_VERSION);
> +
> #endif /* CONFIG_USB_FILE_STORAGE_TEST */
>
> return 0;
On Thu, 08 Jul 2010 21:03:28 +0200, Greg KH <greg@...ah.com> wrote:
> Note, Monday I'll be somewhere in Europe so my email access might be a
> bit limited for that week.
We do have pretty good Internet here you know... ;) Any way, come visit
Warsaw then! :P
At any rate, I think there is no rush, no rush at all.
drivers/usb/gadget/file_storage.c | 10 +---------
drivers/usb/gadget/mass_storage.c | 31 +++++++++++++++++++------------
drivers/usb/gadget/multi.c | 12 ++++++++++++
drivers/usb/gadget/storage_common.c | 12 ++++++++++++
4 files changed, 44 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b49d86e..f1e6956 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3447,15 +3447,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
init_utsname()->sysname, init_utsname()->release,
gadget->name);
- /* On a real device, serial[] would be loaded from permanent
- * storage. We just encode it from the driver version string. */
- for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) {
- unsigned char c = DRIVER_VERSION[i / 2];
-
- if (!c)
- break;
- sprintf(&fsg_string_serial[i], "%02X", c);
- }
+ fsg_string_serial_fill(fsg_string_serial, DRIVER_VERSION);
fsg->thread_task = kthread_create(fsg_main_thread, fsg,
"file-storage-gadget");
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 705cc1f..16e0d4b 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -72,21 +72,16 @@ static struct usb_device_descriptor msg_device_desc = {
.bcdUSB = cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_PER_INTERFACE,
- /* Vendor and product id can be overridden by module parameters. */
.idVendor = cpu_to_le16(FSG_VENDOR_ID),
.idProduct = cpu_to_le16(FSG_PRODUCT_ID),
- /* .bcdDevice = f(hardware) */
- /* .iManufacturer = DYNAMIC */
- /* .iProduct = DYNAMIC */
- /* NO SERIAL NUMBER */
- .bNumConfigurations = 1,
};
static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- /* REVISIT SRP-only hardware is possible, although
+ /*
+ * REVISIT SRP-only hardware is possible, although
* it would not be called "OTG" ...
*/
.bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
@@ -100,16 +95,21 @@ static const struct usb_descriptor_header *otg_desc[] = {
/* string IDs are assigned dynamically */
-#define STRING_MANUFACTURER_IDX 0
-#define STRING_PRODUCT_IDX 1
-#define STRING_CONFIGURATION_IDX 2
+enum {
+ STRING_MANUFACTURER_IDX,
+ STRING_PRODUCT_IDX,
+ STRING_CONFIGURATION_IDX,
+ STRING_SERIAL_IDX
+};
static char manufacturer[50];
+static char serial[13];
static struct usb_string strings_dev[] = {
[STRING_MANUFACTURER_IDX].s = manufacturer,
[STRING_PRODUCT_IDX].s = DRIVER_DESC,
[STRING_CONFIGURATION_IDX].s = "Self Powered",
+ [STRING_SERIAL_IDX].s = serial,
{ } /* end of list */
};
@@ -167,7 +167,6 @@ static struct usb_configuration msg_config_driver = {
.label = "Linux File-Backed Storage",
.bind = msg_do_config,
.bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
@@ -181,7 +180,8 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
struct usb_gadget *gadget = cdev->gadget;
int status;
- /* Allocate string descriptor numbers ... note that string
+ /*
+ * Allocate string descriptor numbers ... note that string
* contents can be overridden by the composite_dev glue.
*/
@@ -201,6 +201,13 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
strings_dev[STRING_PRODUCT_IDX].id = status;
msg_device_desc.iProduct = status;
+ fsg_string_serial_fill(serial, DRIVER_VERSION);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ return status;
+ strings_dev[STRING_SERIAL_IDX].id = status;
+ msg_device_desc.iSerialNumber = status;
+
status = usb_string_id(cdev);
if (status < 0)
return status;
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index a930d7f..6f7447b 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -120,12 +120,15 @@ static const struct usb_descriptor_header *otg_desc[] = {
#define STRING_MANUFACTURER_IDX 0
#define STRING_PRODUCT_IDX 1
+#define STRING_SERIAL_IDX 2
static char manufacturer[50];
+static char serial[13];
static struct usb_string strings_dev[] = {
[STRING_MANUFACTURER_IDX].s = manufacturer,
[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+ [STRING_SERIAL_IDX].s = serial,
{ } /* end of list */
};
@@ -281,6 +284,9 @@ static int __init multi_bind(struct usb_composite_dev *cdev)
snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
+
+ fsg_string_serial_fill(serial, DRIVER_VERSION);
+
status = usb_string_id(cdev);
if (status < 0)
goto fail2;
@@ -293,6 +299,12 @@ static int __init multi_bind(struct usb_composite_dev *cdev)
strings_dev[STRING_PRODUCT_IDX].id = status;
device_desc.iProduct = status;
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail2;
+ strings_dev[STRING_SERIAL_IDX].id = status;
+ device_desc.iSerialNumber = status;
+
#ifdef USB_ETH_RNDIS
/* register our first configuration */
status = usb_add_config(cdev, &rndis_config_driver);
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 04c462f..00acae1 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -545,6 +545,18 @@ static struct usb_gadget_strings fsg_stringtab = {
};
+#define fsg_string_serial_fill_n(serial, n, version) do { \
+ unsigned char *c = version; \
+ unsigned i = ((n) + 1) / 2; \
+ char *s = serial; \
+ for (; *c && --i; s += 2, ++c) \
+ sprintf(s, "%02X", *c); \
+ } while (0)
+
+#define fsg_string_serial_fill(serial, version) \
+ fsg_string_serial_fill_n(serial, ARRAY_SIZE(serial), version)
+
+
/*-------------------------------------------------------------------------*/
/* If the next two routines are called while the gadget is registered,
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists