| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.SOC.1.00.1007090121300.27187@math.ut.ee> Date: Fri, 9 Jul 2010 01:24:03 +0300 (EEST) From: Meelis Roos <mroos@...ux.ee> To: Yinghai Lu <yinghai@...nel.org> cc: Linux Kernel list <linux-kernel@...r.kernel.org>, Ingo Molnar <mingo@...e.hu>, "Eric W. Biederman" <ebiederm@...ssion.com>, Thomas Gleixner <tglx@...utronix.de>, "H. Peter Anvin" <hpa@...or.com> Subject: Re: 2.6.35-rc* regression: ERROR: Unable to locate IOAPIC for GSI * > Do you have bootlog for 2.6.34 with "debug apic=debug"? Below. > Meelis do you have a boot trace from 2.6.34? Meelis can you confirm > that you don't come up in XT_PIC mode in 2.6.34? Now that was a good question. It's XT-PIC in 2.6.34 too, just the ERROR: lines are not there. [ 0.000000] Linux version 2.6.34 (mroos@rhn) (gcc version 4.4.4 (Debian 4.4.4-1) ) #274 PREEMPT Mon May 17 19:43:06 EEST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable) [ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1ffc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FFFF00000 write-back [ 0.000000] 2 base 020000000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 512MB, range: 1MB, type WB [ 0.000000] reg 2, base: 512MB, range: 1MB, type UC [ 0.000000] total RAM covered: 512M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 1 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffc0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ffc0000 page 4k [ 0.000000] kernel direct mapping tables up to 1ffc0000 @ 7000-c000 [ 0.000000] ACPI: RSDP 000ff980 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 1fff0000 0002C (v01 D815EA D815EEA2 20021106 MSFT 00001011) [ 0.000000] ACPI: FACP 1fff1000 00074 (v01 D815EA EA81510A 20021106 MSFT 00001011) [ 0.000000] ACPI: DSDT 1ffe0000 030E4 (v01 D815E2 EA81520A 00000023 MSFT 0100000B) [ 0.000000] ACPI: FACS 1fff8000 00040 [ 0.000000] ACPI: SSDT 1ffe30e4 00035 (v01 D815EA EA81510A 00000015 MSFT 0100000B) [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ffc0000 [ 0.000000] low ram: 0 - 1ffc0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ffc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffc0 [ 0.000000] On node 0 totalpages: 130910 [ 0.000000] free_area_init_node: node 0, pgdat c134abbc, node_mem_map c13e0160 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125920 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] Found and enabled local APIC! [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfb80000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129886 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34 root=/dev/sda3 ro debug apic=debug [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (23 early reservations) [ 0.000000] #0 [0001000000 - 00013d9428] TEXT DATA BSS [ 0.000000] #1 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #2 [00013da000 - 00013e0140] BRK [ 0.000000] #3 [0000007000 - 0000008000] PGTABLE [ 0.000000] #4 [00013e0140 - 00017e0140] BOOTMEM [ 0.000000] #5 [00013d9440 - 00013d9444] BOOTMEM [ 0.000000] #6 [00013d9460 - 00013d94e0] BOOTMEM [ 0.000000] #7 [00013d94e0 - 00013d9510] BOOTMEM [ 0.000000] #8 [00017e0140 - 00017e1140] BOOTMEM [ 0.000000] #9 [00013d9520 - 00013d961c] BOOTMEM [ 0.000000] #10 [00013d9620 - 00013d9660] BOOTMEM [ 0.000000] #11 [00013d9660 - 00013d96a0] BOOTMEM [ 0.000000] #12 [00013d96a0 - 00013d96e0] BOOTMEM [ 0.000000] #13 [00013d96e0 - 00013d9720] BOOTMEM [ 0.000000] #14 [00013d9720 - 00013d9760] BOOTMEM [ 0.000000] #15 [00013d9760 - 00013d97a0] BOOTMEM [ 0.000000] #16 [00013d97a0 - 00013d97e0] BOOTMEM [ 0.000000] #17 [00013d97e0 - 00013d9820] BOOTMEM [ 0.000000] #18 [00013d9820 - 00013d9863] BOOTMEM [ 0.000000] #19 [00013d9880 - 00013d98c3] BOOTMEM [ 0.000000] #20 [00017e1140 - 00017e3140] BOOTMEM [ 0.000000] #21 [00017e3140 - 0001823140] BOOTMEM [ 0.000000] #22 [0001823140 - 0001843140] BOOTMEM [ 0.000000] Memory: 515172k/524032k available (2086k kernel code, 8468k reserved, 1297k data, 272k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) [ 0.000000] vmalloc : 0xe07c0000 - 0xfffa2000 ( 503 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB) [ 0.000000] .init : 0xc134e000 - 0xc1392000 ( 272 kB) [ 0.000000] .data : 0xc120993f - 0xc134df28 (1297 kB) [ 0.000000] .text : 0xc1000000 - 0xc120993f (2086 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=c1319000 soft=c131a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 897.166 MHz processor. [ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1794.33 BogoMIPS (lpj=3588664) [ 0.008449] Mount-cache hash table entries: 512 [ 0.008932] mce: CPU supports 5 MCE banks [ 0.009127] Performance Events: p6 PMU driver. [ 0.009297] ... version: 0 [ 0.009438] ... bit width: 32 [ 0.009577] ... generic registers: 2 [ 0.009717] ... value mask: 00000000ffffffff [ 0.009859] ... max period: 000000007fffffff [ 0.010001] ... fixed-purpose events: 0 [ 0.010142] ... event mask: 0000000000000003 [ 0.010284] CPU: Intel Celeron (Coppermine) stepping 0a [ 0.010475] Checking 'hlt' instruction... OK. [ 0.024596] ACPI: Core revision 20100121 [ 0.034084] ACPI: setting ELCR to 0200 (from 0e00) [ 0.035590] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.035739] Getting VERSION: 40011 [ 0.035877] Getting VERSION: 40011 [ 0.036013] Getting ID: 0 [ 0.036150] Getting ID: f000000 [ 0.036289] Getting LVT0: 700 [ 0.036426] Getting LVT1: 400 [ 0.036571] enabled ExtINT on CPU#0 [ 0.036715] Using local APIC timer interrupts. [ 0.036718] calibrating APIC timer ... [ 0.040000] ... lapic delta = 623014 [ 0.040000] ... PM-Timer delta = 357975 [ 0.040000] ... PM-Timer result ok [ 0.040000] ..... delta 623014 [ 0.040000] ..... mult: 26756575 [ 0.040000] ..... calibration result: 398728 [ 0.040000] ..... CPU clock speed is 897.0562 MHz. [ 0.040000] ..... host bus clock speed is 99.2728 MHz. [ 0.040000] NET: Registered protocol family 16 [ 0.040000] ACPI: bus type pci registered [ 0.040000] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 [ 0.040000] PCI: Using configuration type 1 for base access [ 0.047286] bio: create slab <bio-0> at 0 [ 0.049119] ACPI: EC: Look up EC in DSDT [ 0.051176] ACPI: Executed 1 blocks of module-level executable AML code [ 0.060800] ACPI: Interpreter enabled [ 0.060956] ACPI: (supports S0 S5) [ 0.061148] ACPI: Using PIC for interrupt routing [ 0.083148] ACPI: Power Resource [FDDP] (off) [ 0.083399] ACPI: Power Resource [URP1] (off) [ 0.083627] ACPI: Power Resource [URP2] (off) [ 0.083857] ACPI: Power Resource [LPTP] (off) [ 0.084516] ACPI: No dock devices found. [ 0.084672] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.085686] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.087351] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.087630] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.087897] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffefffff] (ignored) [ 0.088058] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.088430] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO [ 0.088701] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH4 GPIO [ 0.092059] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.092273] pci 0000:00:1f.2: reg 20: [io 0xef40-0xef5f] [ 0.092483] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefaf] [ 0.092694] pci 0000:00:1f.4: reg 20: [io 0xef80-0xef9f] [ 0.092886] pci 0000:00:1f.5: reg 10: [io 0xe800-0xe8ff] [ 0.093040] pci 0000:00:1f.5: reg 14: [io 0xef00-0xef3f] [ 0.093273] pci 0000:02:00.0: reg 10: [mem 0xf2000000-0xf3ffffff pref] [ 0.093428] pci 0000:02:00.0: reg 14: [mem 0xfeafc000-0xfeafffff] [ 0.093581] pci 0000:02:00.0: reg 18: [mem 0xfe000000-0xfe7fffff] [ 0.093746] pci 0000:02:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref] [ 0.093963] pci 0000:00:01.0: PCI bridge to [bus 02-02] [ 0.094112] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.094264] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfeafffff] [ 0.094416] pci 0000:00:01.0: bridge window [mem 0xf1700000-0xf57fffff pref] [ 0.094740] pci 0000:01:08.0: reg 10: [mem 0xfd9f5000-0xfd9f5fff] [ 0.094894] pci 0000:01:08.0: reg 14: [io 0xdf00-0xdf3f] [ 0.095083] pci 0000:01:08.0: supports D1 D2 [ 0.095227] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.095379] pci 0000:01:08.0: PME# disabled [ 0.095548] pci 0000:01:09.0: reg 10: [io 0xdf40-0xdf5f] [ 0.096013] pci 0000:01:09.0: reg 14: [mem 0xfd9f7800-0xfd9f781f] [ 0.096187] pci 0000:01:09.0: reg 30: [mem 0xfd9a0000-0xfd9affff pref] [ 0.096372] pci 0000:01:0d.0: reg 10: [io 0xdf80-0xdf9f] [ 0.096522] pci 0000:01:0d.0: reg 14: [mem 0xfd9f7c00-0xfd9f7c1f] [ 0.096694] pci 0000:01:0d.0: reg 30: [mem 0xfd9e0000-0xfd9effff pref] [ 0.096876] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.097026] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.097174] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.097324] pci 0000:00:1e.0: bridge window [mem 0xf1600000-0xf16fffff pref] [ 0.097588] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.097858] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.098144] pci_bus 0000:00: on NUMA node 0 [ 0.098303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.098818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.105490] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.106010] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12) [ 0.106509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.107151] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.107650] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.108270] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.108784] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.109433] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12) [ 0.110418] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.110697] vgaarb: loaded [ 0.111519] SCSI subsystem initialized [ 0.111780] libata version 3.00 loaded. [ 0.112559] PCI: Using ACPI for IRQ routing [ 0.112715] PCI: pci_cache_line_size set to 32 bytes [ 0.112956] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.112987] reserve RAM buffer: 000000001ffc0000 - 000000001fffffff [ 0.113686] [ 0.113690] printing PIC contents [ 0.114095] ... PIC IMR: fdfa [ 0.114234] ... PIC IRR: 0c00 [ 0.114377] ... PIC ISR: 0000 [ 0.114517] ... PIC ELCR: 0200 [ 0.114659] printing local APIC contents on CPU#0/0: [ 0.114803] ... APIC ID: 00000000 (0) [ 0.114942] ... APIC VERSION: 00040011 [ 0.115083] ... APIC TASKPRI: 00000000 (00) [ 0.115224] ... APIC ARBPRI: 00000000 (00) [ 0.115363] ... APIC PROCPRI: 00000000 [ 0.115503] ... APIC LDR: 01000000 [ 0.115642] ... APIC DFR: ffffffff [ 0.115780] ... APIC SPIV: 000001ff [ 0.115920] ... APIC ISR field: [ 0.116000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.116000] ... APIC TMR field: [ 0.116000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.116000] ... APIC IRR field: [ 0.116000] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.116000] ... APIC ESR: 00000000 [ 0.116000] ... APIC ICR: 000c461f [ 0.116000] ... APIC ICR2: 00000000 [ 0.116000] ... APIC LVTT: 000200ef [ 0.116000] ... APIC LVTPC: 00000400 [ 0.116000] ... APIC LVT0: 00000700 [ 0.116000] ... APIC LVT1: 00000400 [ 0.116000] ... APIC LVTERR: 000000fe [ 0.116000] ... APIC TMICT: 00006158 [ 0.116000] ... APIC TMCCT: 000028ac [ 0.116000] ... APIC TDCR: 00000003 [ 0.116000] [ 0.116011] number of MP IRQ sources: 0. [ 0.116153] testing the IO APIC....................... [ 0.116296] IRQ to pin mappings: [ 0.116493] .................................... done. [ 0.116672] Switching to clocksource tsc [ 0.116912] pnp: PnP ACPI init [ 0.117094] ACPI: bus type pnp registered [ 0.128095] pnp: PnP ACPI: found 13 devices [ 0.128249] ACPI: ACPI bus type pnp unregistered [ 0.128464] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.128617] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.128767] system 00:0c: [mem 0x00100000-0x1fffffff] could not be reserved [ 0.165504] pci 0000:00:01.0: PCI bridge to [bus 02-02] [ 0.165660] pci 0000:00:01.0: bridge window [io disabled] [ 0.165812] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfeafffff] [ 0.165963] pci 0000:00:01.0: bridge window [mem 0xf1700000-0xf57fffff pref] [ 0.166237] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.166384] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.166536] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.166688] pci 0000:00:1e.0: bridge window [mem 0xf1600000-0xf16fffff pref] [ 0.166981] pci 0000:00:1e.0: setting latency timer to 64 [ 0.167131] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.167277] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.167426] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfeafffff] [ 0.167574] pci_bus 0000:02: resource 2 [mem 0xf1700000-0xf57fffff pref] [ 0.167724] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.167870] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff] [ 0.168018] pci_bus 0000:01: resource 2 [mem 0xf1600000-0xf16fffff pref] [ 0.168166] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.168312] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff] [ 0.168566] NET: Registered protocol family 2 [ 0.168813] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.169244] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.169945] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.170411] TCP: Hash tables configured (established 16384 bind 16384) [ 0.170567] TCP reno registered [ 0.170721] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.170893] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.171339] NET: Registered protocol family 1 [ 0.171614] pci 0000:02:00.0: Boot video device [ 0.171798] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 0.172084] PCI: CLS 32 bytes, default 32 [ 0.174615] VFS: Disk quotas dquot_6.5.2 [ 0.174830] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.175203] msgmni has been set to 1006 [ 0.176123] alg: No test for stdrng (krng) [ 0.176314] io scheduler noop registered [ 0.176530] io scheduler cfq registered (default) [ 0.190905] Non-volatile memory driver v1.3 [ 0.191064] Linux agpgart interface v0.103 [ 0.191263] agpgart-intel 0000:00:00.0: Intel i815 Chipset [ 0.197385] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 0.197705] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 0.197979] Hangcheck: Using get_cycles(). [ 0.198309] [drm] Initialized drm 1.1.0 20060810 [ 0.198462] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.452519] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.708506] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.710109] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.710855] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.711878] Floppy drive(s): fd0 is 1.44M [ 0.731806] FDC 0 is a post-1991 82077 [ 0.733658] ata_piix 0000:00:1f.1: version 2.13 [ 0.733970] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.734399] scsi0 : ata_piix [ 0.735081] scsi1 : ata_piix [ 0.738297] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.738460] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.738953] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.739107] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.739744] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 0.739898] PCI: setting IRQ 11 as level-triggered [ 0.740047] e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 0.763932] e100 0000:01:08.0: PME# disabled [ 0.764746] ata2: port disabled. ignoring. [ 0.765053] e100: eth0: e100_probe: addr 0xfd9f5000, irq 11, MAC addr 00:03:47:a4:64:d5 [ 0.765570] console [netcon0] enabled [ 0.765715] netconsole: network logging started [ 0.766252] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.769816] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.769977] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.771023] mice: PS/2 mouse device common for all mice [ 0.775007] cpuidle: using governor ladder [ 0.775160] cpuidle: using governor menu [ 0.775823] TCP cubic registered [ 0.775977] NET: Registered protocol family 17 [ 0.776151] Using IPI Shortcut mode [ 0.798273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.984900] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100 [ 0.985055] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.000810] ata1.00: configured for UDMA/100 [ 1.001943] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5 [ 1.003389] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.003831] sd 0:0:0:0: [sda] Write Protect is off [ 1.003980] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.004191] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.004918] sda: sda1 sda2 sda3 sda4 [ 1.034248] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.727855] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 1.752996] EXT3-fs (sda3): mounted filesystem with writeback data mode [ 1.753213] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 1.753386] Freeing unused kernel memory: 272k freed [ 1.754584] Write protecting the kernel text: 2088k [ 1.754780] Write protecting the kernel read-only data: 1076k [ 1.755227] kjournald starting. Commit interval 5 seconds [ 5.073675] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 5.073979] ACPI: Power Button [PBTN] [ 5.074365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.074642] ACPI: Power Button [PWRF] [ 5.529403] usbcore: registered new interface driver usbfs [ 5.530706] usbcore: registered new interface driver hub [ 5.543156] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 5.543318] PCI: setting IRQ 9 as level-triggered [ 5.543468] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 5.549240] usbcore: registered new device driver usb [ 5.702226] tms380tr.c: v1.10 30/12/2002 by Christoph Goos, Adam Fritzler [ 5.737960] parport_pc 00:0a: reported by Plug and Play ACPI [ 5.738172] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 5.822314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.961422] uhci_hcd: USB Universal Host Controller Interface driver [ 5.962138] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 5.962300] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 5.962590] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 5.962740] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 5.962909] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 5.963228] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ef40 [ 5.963502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.963655] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.963924] usb usb1: Product: UHCI Host Controller [ 5.964126] usb usb1: Manufacturer: Linux 2.6.34 uhci_hcd [ 5.964274] usb usb1: SerialNumber: 0000:00:1f.2 [ 5.967581] hub 1-0:1.0: USB hub found [ 5.967764] hub 1-0:1.0: 2 ports detected [ 5.968576] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 5.968735] PCI: setting IRQ 10 as level-triggered [ 5.968886] uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 5.969174] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 5.969323] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 5.969491] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 5.976587] uhci_hcd 0000:00:1f.4: irq 10, io base 0x0000ef80 [ 5.976887] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.977039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.977308] usb usb2: Product: UHCI Host Controller [ 5.977452] usb usb2: Manufacturer: Linux 2.6.34 uhci_hcd [ 5.977598] usb usb2: SerialNumber: 0000:00:1f.4 [ 5.978540] hub 2-0:1.0: USB hub found [ 5.978712] hub 2-0:1.0: 2 ports detected [ 5.985995] rtc_cmos 00:02: RTC can wake from S4 [ 5.988918] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 5.989124] rtc0: alarms up to one month, 114 bytes nvram [ 6.008990] tmspci.c: v1.02 23/11/2000 by Adam Fritzler [ 6.009614] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 [ 6.009770] tmspci 0000:01:09.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 [ 6.010658] tr%d: 3Com Token Link Velocity [ 6.010817] tr%d: IO: 0xdf40 IRQ: 11 [ 6.010969] tr%d: Ring Station Address: 00:a0:24:61:c4:df [ 6.011852] tmspci 0000:01:0d.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 [ 6.012271] tr%d: 3Com Token Link Velocity [ 6.012419] tr%d: IO: 0xdf80 IRQ: 11 [ 6.012570] tr%d: Ring Station Address: 00:a0:24:61:bd:96 [ 6.012741] ------------[ cut here ]------------ [ 6.012899] WARNING: at fs/proc/generic.c:598 proc_register+0x14a/0x18b() [ 6.013047] Hardware name: [ 6.013187] proc_dir_entry '11/tr%d' already registered [ 6.013331] Modules linked in: tmspci(+) rtc_cmos uhci_hcd ehci_hcd soundcore parport_pc tms380tr rtc_core rtc_lib tr parport snd_page_alloc evdev i2c_i801 usbcore button processor [ 6.013955] Pid: 462, comm: modprobe Not tainted 2.6.34 #274 [ 6.014101] Call Trace: [ 6.014261] [<c101ccde>] warn_slowpath_common+0x65/0x7c [ 6.014410] [<c10a0bcb>] ? proc_register+0x14a/0x18b [ 6.014558] [<c101cd29>] warn_slowpath_fmt+0x24/0x27 [ 6.014704] [<c10a0bcb>] proc_register+0x14a/0x18b [ 6.014852] [<c10a0d8b>] proc_mkdir_mode+0x2f/0x43 [ 6.014996] [<c10a0dae>] proc_mkdir+0xf/0x11 [ 6.015145] [<c104188c>] register_handler_proc+0xd5/0xf5 [ 6.015311] [<c103ffae>] __setup_irq+0x224/0x2cb [ 6.015460] [<c104040a>] request_threaded_irq+0xd2/0x128 [ 6.015618] [<e08f21ef>] ? tms380tr_interrupt+0x0/0xeb1 [tms380tr] [ 6.015776] [<e0989291>] tms_pci_attach+0x1c5/0x232 [tmspci] [ 6.015934] [<c10f5062>] local_pci_probe+0xe/0x10 [ 6.016110] [<c10f522b>] pci_device_probe+0x43/0x66 [ 6.016267] [<c11512b8>] driver_probe_device+0x77/0xea [ 6.016416] [<c115136e>] __driver_attach+0x43/0x5f [ 6.016564] [<c1150cba>] bus_for_each_dev+0x3d/0x67 [ 6.016710] [<c1151193>] driver_attach+0x14/0x16 [ 6.016856] [<c115132b>] ? __driver_attach+0x0/0x5f [ 6.017131] [<c1150765>] bus_add_driver+0x94/0x1c4 [ 6.017285] [<c115159e>] driver_register+0x7c/0xe3 [ 6.017436] [<c10f5409>] __pci_register_driver+0x31/0x8e [ 6.017590] [<e098c000>] ? tms_pci_init+0x0/0x19 [tmspci] [ 6.017740] [<e098c017>] tms_pci_init+0x17/0x19 [tmspci] [ 6.017891] [<c100104b>] do_one_initcall+0x4b/0x130 [ 6.018042] [<c103e6f1>] sys_init_module+0xa7/0x1de [ 6.018191] [<c1002717>] sysenter_do_call+0x12/0x26 [ 6.018339] ---[ end trace 1c1db93f909cde7e ]--- [ 7.525915] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 7.526235] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.148055] intel8x0_measure_ac97_clock: measured 55810 usecs (3126 samples) [ 8.148224] intel8x0: clocking to 41134 [ 9.336125] Adding 1004056k swap on /dev/sda2. Priority:-1 extents:1 across:1004056k [ 9.638829] EXT3-fs (sda3): using internal journal [ 9.886421] NTFS driver 2.1.29 [Flags: R/W MODULE]. [ 10.083811] usbcore: registered new interface driver libusual [ 10.119234] Initializing USB Mass Storage driver... [ 10.120574] usbcore: registered new interface driver usb-storage [ 10.120738] USB Mass Storage support registered. [ 10.187632] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x [ 10.187819] ACPI: resource smsc47m1 [io 0x0804] conflicts with ACPI region RNT3 [??? 0x00000804 flags 0x33] [ 10.188134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.069245] kjournald starting. Commit interval 5 seconds [ 11.069593] EXT3-fs (sda4): using internal journal [ 11.069765] EXT3-fs (sda4): mounted filesystem with writeback data mode [ 13.004194] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 18.625138] NET: Registered protocol family 10 [ 18.625732] lo: Disabled Privacy Extensions [ 20.957755] RPC: Registered udp transport module. [ 20.958036] RPC: Registered tcp transport module. [ 20.958178] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.261975] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de). [ 22.049717] fuse init (API version 7.13) [ 23.045741] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input4 [ 24.067823] svc: failed to register lockdv1 RPC service (errno 97). [ 24.075639] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 24.105691] NFSD: starting 90-second grace period [ 29.548031] eth0: no IPv6 routers present [ 31.462646] lp0: using parport0 (interrupt-driven). [ 31.498984] ppdev: user-space parallel port driver [ 39.808185] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 39.808207] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 39.815022] [drm] Initialized mga 3.2.1 20051102 for 0000:02:00.0 on minor 0 [ 39.817031] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 39.817075] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode [ 39.817113] pci 0000:02:00.0: putting AGP V2 device into 2x mode [ 39.880149] [drm] Initialized card for AGP DMA. [ 39.949998] platform mga_warp.0: firmware: requesting matrox/g400_warp.fw [ 51.797834] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 51.797878] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode [ 51.797915] pci 0000:02:00.0: putting AGP V2 device into 2x mode [ 51.860952] [drm] Initialized card for AGP DMA. [ 51.865590] platform mga_warp.0: firmware: requesting matrox/g400_warp.fw -- Meelis Roos (mroos@...ux.ee) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists