| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 09 Jul 2010 14:28:02 -0700
From: Dan Williams <dan.j.williams@...el.com>
To: Chris Li <lkml@...isli.org>
CC: David Woodhouse <dwmw2@...radead.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: BUG in drivers/dma/ioat/dma_v2.c:314
On 7/7/2010 2:56 PM, Chris Li wrote:
> No problem. Is this what you are expecting? No crash when modprobe ioatdma.
Not really, I was expecting the BIOS misconfiguration to be caught...
On 7/6/2010 8:40 PM, David Woodhouse wrote:
> (I'm still only checking for include_all rather than checking for
> !cap_write_drain() because that _really_ ought to work; looking at
> Chris' latest dmesg it _is_ being assigned to the catch-all unit.)
It doesn't appear to from the dmesg below. I agree, I would prefer to
do a topology based check like this rather than cheating with
!cap_write_drain(), but it looks like cheating is the reliable option.
> ioatdma 0000:00:0f.0: failed to start channel chanerr: 0x10
> ioatdma 0000:00:0f.0: Freeing 1 in use descriptors!
> ioatdma 0000:00:0f.0: selftest cannot allocate chan resource
> ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
> ioatdma 0000:00:0f.0: can't derive routing for PCI INT A
Same as the original result, ioatdma blocked from accessing memory, no
report about BIOS borkage.
--
Dan
>
> The full dmesg follows.
>
> Chris
>
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.35-rc3+ () (gcc version 4.4.4 20100503 (Red Hat
> 4.4.4-2) (GCC) ) #46 SMP Wed Jul 7 14:17:31 PDT 2010
> Command line: root=UUID=e953c66f-e484-4e5b-8b21-93fe8a024879 ro
> nomodeset noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16
> KEYBOARDTYPE=pc KEYTABLE=us
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f67e000 (usable)
> BIOS-e820: 000000007f67e000 - 000000007f6ec000 (ACPI NVS)
> BIOS-e820: 000000007f6ec000 - 000000007f6ed000 (ACPI data)
> BIOS-e820: 000000007f6ed000 - 000000007f6f5000 (ACPI NVS)
> BIOS-e820: 000000007f6f5000 - 000000007f991000 (ACPI data)
> BIOS-e820: 000000007f991000 - 000000007f995000 (reserved)
> BIOS-e820: 000000007f995000 - 000000007fc00000 (ACPI data)
> BIOS-e820: 000000007fc00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
> NX (Execute Disable) protection: active
> DMI 2.4 present.
> e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
> e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> No AGP bridge found
> last_pfn = 0x280000 max_arch_pfn = 0x400000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
> 00000-9FFFF write-back
> A0000-FFFFF uncachable
> MTRR variable ranges enabled:
> 0 base 0080000000 mask 3F80000000 uncachable
> 1 base 007FC00000 mask 3FFFC00000 uncachable
> 2 base 0000000000 mask 3000000000 write-back
> 3 disabled
> 4 disabled
> 5 disabled
> 6 disabled
> 7 disabled
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> original variable MTRRs
> reg 0, base: 2GB, range: 2GB, type UC
> reg 1, base: 2044MB, range: 4MB, type UC
> reg 2, base: 0GB, range: 64GB, type WB
> total RAM covered: 63484M
> Found optimal setting for mtrr clean up
> gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
> New variable MTRRs
> reg 0, base: 0GB, range: 2GB, type WB
> reg 1, base: 2044MB, range: 4MB, type UC
> reg 2, base: 4GB, range: 4GB, type WB
> reg 3, base: 8GB, range: 8GB, type WB
> reg 4, base: 16GB, range: 16GB, type WB
> reg 5, base: 32GB, range: 32GB, type WB
> e820 update range: 000000007fc00000 - 0000000100000000 (usable) ==> (reserved)
> last_pfn = 0x7f67e max_arch_pfn = 0x400000000
> initial memory mapped : 0 - 20000000
> found SMP MP-table at [ffff8800000fec60] fec60
> init_memory_mapping: 0000000000000000-000000007f67e000
> 0000000000 - 007f600000 page 2M
> 007f600000 - 007f67e000 page 4k
> kernel direct mapping tables up to 7f67e000 @ 8000-c000
> init_memory_mapping: 0000000100000000-0000000280000000
> 0100000000 - 0280000000 page 2M
> kernel direct mapping tables up to 280000000 @ a000-15000
> RAMDISK: 3736a000 - 37ff0000
> ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
> ACPI: XSDT 000000007f7441c0 000F4 (v01 APPLE Apple00 0000006C 01000013)
> ACPI: FACP 000000007f740000 000F4 (v04 APPLE Apple00 0000006C Loki 0000005F)
> ACPI: DSDT 000000007f737000 049CC (v01 APPLE Apple00 00010001 Loki 0000005F)
> ACPI: FACS 000000007f68b000 00040
> ACPI: ECDT 000000007f742000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
> ACPI: HPET 000000007f73f000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
> ACPI: APIC 000000007f73d000 000BC (v02 APPLE Apple00 00000000 Loki 0000005F)
> ACPI: MCFG 000000007f73c000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
> ACPI: SSDT 000000007f736000 00146 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
> ACPI: SSDT 000000007f735000 0034B (v01 CPUPST Cpu0Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f734000 00047 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f733000 00337 (v01 CPUPST Cpu1Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f732000 00047 (v01 PmRef Cpu2Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f731000 00337 (v01 CPUPST Cpu2Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f730000 00047 (v01 PmRef Cpu3Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f72f000 00337 (v01 CPUPST Cpu3Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f72e000 00047 (v01 PmRef Cpu4Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f72d000 00337 (v01 CPUPST Cpu4Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f72c000 00047 (v01 PmRef Cpu5Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f72b000 00337 (v01 CPUPST Cpu5Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f72a000 00047 (v01 PmRef Cpu6Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f729000 00337 (v01 CPUPST Cpu6Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f728000 00047 (v01 PmRef Cpu7Cst 00003000 INTL 20061109)
> ACPI: SSDT 000000007f727000 00337 (v01 CPUPST Cpu7Ist 00000012 INTL 20061109)
> ACPI: SSDT 000000007f726000 0003D (v01 PmRef CpuPm 00003000 INTL 20061109)
> ACPI: SSDT 000000007f71d000 004BE (v01 PCIRef Pci8844 00001000 INTL 20061109)
> ACPI: DMAR 000000007f71a000 00088 (v01 APPLE Apple00 00000001 Loki 0000005F)
> ACPI: SSDT 000000007f724000 00892 (v01 SataRe SataPri 00001000 INTL 20061109)
> ACPI: SSDT 000000007f723000 005F4 (v01 SataRe SataSec 00001000 INTL 20061109)
> ACPI: Local APIC address 0xfee00000
> No NUMA configuration found
> Faking a node at 0000000000000000-0000000280000000
> Initmem setup node 0 0000000000000000-0000000280000000
> NODE_DATA [0000000100000000 - 0000000100013fff]
> [ffffea0000000000-ffffea0008bfffff] PMD ->
> [ffff880100200000-ffff8801071fffff] on node 0
> Zone PFN ranges:
> DMA 0x00000001 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00280000
> Movable zone start PFN for each node
> early_node_map[3] active PFN ranges
> 0: 0x00000001 -> 0x0000009f
> 0: 0x00000100 -> 0x0007f67e
> 0: 0x00100000 -> 0x00280000
> On node 0 totalpages: 2094620
> DMA zone: 56 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 3942 pages, LIFO batch:0
> DMA32 zone: 14280 pages used for memmap
> DMA32 zone: 503478 pages, LIFO batch:31
> Normal zone: 21504 pages used for memmap
> Normal zone: 1551360 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x07] enabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> SMP: Allowing 8 CPUs, 0 hotplug CPUs
> nr_irqs_gsi: 40
> early_res array is doubled to 64 at [7000 - 77ff]
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> PM: Registered nosave memory: 000000007f67e000 - 000000007f6ec000
> PM: Registered nosave memory: 000000007f6ec000 - 000000007f6ed000
> PM: Registered nosave memory: 000000007f6ed000 - 000000007f6f5000
> PM: Registered nosave memory: 000000007f6f5000 - 000000007f991000
> PM: Registered nosave memory: 000000007f991000 - 000000007f995000
> PM: Registered nosave memory: 000000007f995000 - 000000007fc00000
> PM: Registered nosave memory: 000000007fc00000 - 0000000080000000
> PM: Registered nosave memory: 0000000080000000 - 00000000ffe00000
> PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
> Allocating PCI resources starting at 80000000 (gap: 80000000:7fe00000)
> Booting paravirtualized kernel on bare hardware
> setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
> PERCPU: Embedded 30 pages/cpu @ffff880002200000 s90304 r8192 d24384 u262144
> pcpu-alloc: s90304 r8192 d24384 u262144 alloc=1*2097152
> pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> early_res array is doubled to 128 at [10000 - 10fff]
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058780
> Policy zone: Normal
> Kernel command line: root=UUID=e953c66f-e484-4e5b-8b21-93fe8a024879 ro
> nomodeset noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16
> KEYBOARDTYPE=pc KEYTABLE=us
> PID hash table entries: 4096 (order: 3, 32768 bytes)
> Checking aperture...
> No AGP bridge found
> Calgary: detecting Calgary via BIOS EBDA area
> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> Subtract (62 early reservations)
> #1 [0001000000 - 0001deed10] TEXT DATA BSS
> #2 [003736a000 - 0037ff0000] RAMDISK
> #3 [0001def000 - 0001def1f1] BRK
> #4 [000009fc00 - 00000fec60] BIOS reserved
> #5 [00000fec60 - 00000fec70] MP-table mpf
> #6 [00000feea4 - 0000100000] BIOS reserved
> #7 [00000fec70 - 00000feea4] MP-table mpc
> #8 [0000001000 - 0000003000] TRAMPOLINE
> #9 [0000003000 - 0000007000] ACPI WAKEUP
> #10 [0000008000 - 000000a000] PGTABLE
> #11 [000000a000 - 0000010000] PGTABLE
> #12 [0100000000 - 0100014000] NODE_DATA
> #13 [0001def200 - 0001df0200] BOOTMEM
> #14 [00021f0200 - 00021f0800] BOOTMEM
> #15 [0100014000 - 0100015000] BOOTMEM
> #16 [0100015000 - 0100016000] BOOTMEM
> #17 [0100200000 - 0107200000] MEMMAP 0
> #18 [0001deed40 - 0001deeec0] BOOTMEM
> #19 [0001df0200 - 0001e08200] BOOTMEM
> #20 [0001e08200 - 0001e20200] BOOTMEM
> #21 [0001e21000 - 0001e22000] BOOTMEM
> #22 [0001deeec0 - 0001deef01] BOOTMEM
> #23 [0001deef40 - 0001deef83] BOOTMEM
> #24 [0001e20200 - 0001e20510] BOOTMEM
> #25 [0001e20540 - 0001e205a8] BOOTMEM
> #26 [0001e205c0 - 0001e20628] BOOTMEM
> #27 [0001e20640 - 0001e206a8] BOOTMEM
> #28 [0001e206c0 - 0001e20728] BOOTMEM
> #29 [0001e20740 - 0001e207a8] BOOTMEM
> #30 [0001e207c0 - 0001e20828] BOOTMEM
> #31 [0001e20840 - 0001e208a8] BOOTMEM
> #32 [0001e208c0 - 0001e20928] BOOTMEM
> #33 [0001e20940 - 0001e209a8] BOOTMEM
> #34 [0001e209c0 - 0001e20a28] BOOTMEM
> #35 [0001e20a40 - 0001e20aa8] BOOTMEM
> #36 [0001e20ac0 - 0001e20b28] BOOTMEM
> #37 [0001e20b40 - 0001e20ba8] BOOTMEM
> #38 [0001deefc0 - 0001deefe0] BOOTMEM
> #39 [0001e20bc0 - 0001e20be0] BOOTMEM
> #40 [0001e20c00 - 0001e20c8b] BOOTMEM
> #41 [0001e20cc0 - 0001e20d4b] BOOTMEM
> #42 [0002200000 - 000221e000] BOOTMEM
> #43 [0002240000 - 000225e000] BOOTMEM
> #44 [0002280000 - 000229e000] BOOTMEM
> #45 [00022c0000 - 00022de000] BOOTMEM
> #46 [0002300000 - 000231e000] BOOTMEM
> #47 [0002340000 - 000235e000] BOOTMEM
> #48 [0002380000 - 000239e000] BOOTMEM
> #49 [00023c0000 - 00023de000] BOOTMEM
> #50 [0001e20d80 - 0001e20d88] BOOTMEM
> #51 [0001e20dc0 - 0001e20dc8] BOOTMEM
> #52 [0001e20e00 - 0001e20e20] BOOTMEM
> #53 [0001e20e40 - 0001e20e80] BOOTMEM
> #54 [0001e20e80 - 0001e20fa0] BOOTMEM
> #55 [0001e24000 - 0001e24048] BOOTMEM
> #56 [0001e24080 - 0001e240c8] BOOTMEM
> #57 [0001e24100 - 0001e2c100] BOOTMEM
> #58 [00023de000 - 00063de000] BOOTMEM
> #59 [0001e2c100 - 0001e4c100] BOOTMEM
> #60 [0001e4c100 - 0001e8c100] BOOTMEM
> #61 [0000011000 - 0000019000] BOOTMEM
> Memory: 8169400k/10485760k available (4310k kernel code, 2107280k
> absent, 209080k reserved, 6881k data, 1508k init)
> SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> Hierarchical RCU implementation.
> RCU-based detection of stalled CPUs is disabled.
> Verbose stalled-CPUs detection is disabled.
> NR_IRQS:16640 nr_irqs:744
> Extended CMOS year: 2000
> Console: colour VGA+ 80x25
> console [tty0] enabled
> allocated 83886080 bytes of page_cgroup
> please try 'cgroup_disable=memory' option if you don't want memory cgroups
> hpet clockevent registered
> Fast TSC calibration using PIT
> Detected 2793.018 MHz processor.
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 5586.03 BogoMIPS (lpj=2793018)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> mce: CPU supports 6 MCE banks
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
> ... version: 2
> ... bit width: 40
> ... generic registers: 2
> ... value mask: 000000ffffffffff
> ... max period: 000000007fffffff
> ... fixed-purpose events: 3
> ... event mask: 0000000700000003
> ACPI: Core revision 20100428
> ftrace: converting mcount calls to 0f 1f 44 00 00
> ftrace: allocating 20113 entries in 79 pages
> DMAR: Host address width 38
> DMAR: DRHD base: 0x000000fe710000 flags: 0x0
> IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900000c2f0462 ecap e01
> DMAR: DRHD base: 0x000000fe714000 flags: 0x0
> IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900000c2f0462 ecap e01
> DMAR: DRHD base: 0x000000fe719000 flags: 0x0
> IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900000c2f0462 ecap e01
> DMAR: DRHD base: 0x000000fe718000 flags: 0x1
> IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900000c2f0462 ecap e01
> DMAR: No RMRR found
> DMAR: No ATSR found
> Setting APIC routing to flat
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Xeon(R) CPU E5462 @ 2.80GHz stepping 06
> Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
> Brought up 8 CPUs
> Total of 8 processors activated (44687.76 BogoMIPS).
> regulator: core version 0.5
> Time: 14:21:29 Date: 07/07/10
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: not using MMCONFIG
> PCI: Using configuration type 1 for base access
> bio: create slab<bio-0> at 0
> ACPI: EC: EC description table is found, configuring boot EC
> ACPI: BIOS _OSI(Linux) query ignored
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI: BIOS offers _GTS
> ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@...r.kernel.org
> ACPI: Using IOAPIC for interrupt routing
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
> motherboard resources
> ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> ACPI: No dock devices found.
> PCI: Using host bridge windows from ACPI; if necessary, use
> "pci=nocrs" and report a bug
> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
> pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
> pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
> pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
> pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfe000000]
> pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:00.0: PME# disabled
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:01.0: PME# disabled
> pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:05.0: PME# disabled
> pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:09.0: PME# disabled
> pci 0000:00:0f.0: reg 10: [mem 0x90b00000-0x90b03fff 64bit]
> pci 0000:00:1b.0: reg 10: [mem 0x90b04000-0x90b07fff 64bit]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PME# disabled
> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.2: PME# disabled
> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.3: PME# disabled
> pci 0000:00:1d.0: reg 20: [io 0x30a0-0x30bf]
> pci 0000:00:1d.1: reg 20: [io 0x3080-0x309f]
> pci 0000:00:1d.2: reg 20: [io 0x3060-0x307f]
> pci 0000:00:1d.3: reg 20: [io 0x3040-0x305f]
> pci 0000:00:1d.7: reg 10: [mem 0x90b08400-0x90b087ff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.1: reg 10: [io 0x30e8-0x30ef]
> pci 0000:00:1f.1: reg 14: [io 0x30fc-0x30ff]
> pci 0000:00:1f.1: reg 18: [io 0x30e0-0x30e7]
> pci 0000:00:1f.1: reg 1c: [io 0x30f8-0x30fb]
> pci 0000:00:1f.1: reg 20: [io 0x30c0-0x30cf]
> pci 0000:00:1f.2: reg 10: [io 0x30d8-0x30df]
> pci 0000:00:1f.2: reg 14: [io 0x30f4-0x30f7]
> pci 0000:00:1f.2: reg 18: [io 0x30d0-0x30d7]
> pci 0000:00:1f.2: reg 1c: [io 0x30f0-0x30f3]
> pci 0000:00:1f.2: reg 20: [io 0x3020-0x302f]
> pci 0000:00:1f.2: reg 24: [mem 0x90b08000-0x90b083ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
> pci 0000:00:01.0: PCI bridge to [bus 01-01]
> pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:02:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
> pci 0000:02:00.0: reg 18: [mem 0x90a20000-0x90a2ffff 64bit]
> pci 0000:02:00.0: reg 20: [io 0x2000-0x20ff]
> pci 0000:02:00.0: reg 30: [mem 0x90a00000-0x90a1ffff pref]
> pci 0000:02:00.0: supports D1 D2
> pci 0000:00:05.0: PCI bridge to [bus 02-02]
> pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
> pci 0000:00:05.0: bridge window [mem 0x90a00000-0x90afffff]
> pci 0000:00:05.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
> pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:03:00.0: PME# disabled
> pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
> pci 0000:03:00.3: PME# disabled
> pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can
> enable it with 'pcie_aspm=force'
> pci 0000:00:09.0: PCI bridge to [bus 03-08]
> pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
> pci 0000:00:09.0: bridge window [mem 0x90000000-0x908fffff]
> pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:04:00.0: PME# disabled
> pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can
> enable it with 'pcie_aspm=force'
> pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:04:01.0: PME# disabled
> pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can
> enable it with 'pcie_aspm=force'
> pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
> pci 0000:04:02.0: PME# disabled
> pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can
> enable it with 'pcie_aspm=force'
> pci 0000:03:00.0: PCI bridge to [bus 04-07]
> pci 0000:03:00.0: bridge window [io 0x1000-0x1fff]
> pci 0000:03:00.0: bridge window [mem 0x90000000-0x908fffff]
> pci 0000:03:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:04:00.0: PCI bridge to [bus 05-05]
> pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:04:01.0: PCI bridge to [bus 06-06]
> pci 0000:04:01.0: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:04:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:04:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:07:00.0: reg 10: [mem 0x90820000-0x9083ffff]
> pci 0000:07:00.0: reg 14: [mem 0x90400000-0x907fffff]
> pci 0000:07:00.0: reg 18: [io 0x1020-0x103f]
> pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:07:00.0: PME# disabled
> pci 0000:07:00.1: reg 10: [mem 0x90800000-0x9081ffff]
> pci 0000:07:00.1: reg 14: [mem 0x90000000-0x903fffff]
> pci 0000:07:00.1: reg 18: [io 0x1000-0x101f]
> pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
> pci 0000:07:00.1: PME# disabled
> pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can
> enable it with 'pcie_aspm=force'
> pci 0000:04:02.0: PCI bridge to [bus 07-07]
> pci 0000:04:02.0: bridge window [io 0x1000-0x1fff]
> pci 0000:04:02.0: bridge window [mem 0x90000000-0x908fffff]
> pci 0000:04:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:03:00.3: PCI bridge to [bus 08-08]
> pci 0000:03:00.3: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:03:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:03:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1c.0: PCI bridge to [bus 09-09]
> pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1c.1: PCI bridge to [bus 0a-0a]
> pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:0b:00.0: supports D1 D2
> pci 0000:00:1c.2: PCI bridge to [bus 0b-0c]
> pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:00:1c.2: bridge window [mem 0x90900000-0x909fffff]
> pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:0c:00.0: reg 10: [mem 0x90904000-0x909047ff]
> pci 0000:0c:00.0: reg 14: [mem 0x90900000-0x90903fff]
> pci 0000:0c:00.0: supports D1 D2
> pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:0c:00.0: PME# disabled
> pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
> pci 0000:0b:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
> pci 0000:0b:00.0: bridge window [mem 0x90900000-0x909fffff]
> pci 0000:0b:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1c.3: PCI bridge to [bus 0d-0d]
> pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
> pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
> pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
> (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff]
> (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfe000000]
> (subtractive decode)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2.P2P5._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2.P2P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2.P2P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NRP5._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NRP1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 9 10 *11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 9 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 9 *10 11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 9 10 11) *3
> ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 9 10 11)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 9 10 *11)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 9 *10 11)
> vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: pci_cache_line_size set to 64 bytes
> reserve RAM buffer: 000000000009fc00 - 000000000009ffff
> reserve RAM buffer: 000000007f67e000 - 000000007fffffff
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> Switching to clocksource tsc
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 10 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
> system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
> system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
> system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
> system 00:01: [mem 0xfe700000-0xfe7003ff] has been reserved
> system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved
> system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
> system 00:08: [io 0x0320-0x037f] has been reserved
> system 00:08: [io 0x0400-0x047f] has been reserved
> system 00:08: [io 0x0500-0x053f] has been reserved
> system 00:08: [io 0x0872-0x0875] has been reserved
> pci 0000:00:1c.0: BAR 14: assigned [mem 0x90c00000-0x90dfffff]
> pci 0000:00:1c.0: BAR 15: assigned [mem 0x90e00000-0x90ffffff 64bit pref]
> pci 0000:00:1c.1: BAR 14: assigned [mem 0x91000000-0x911fffff]
> pci 0000:00:1c.1: BAR 15: assigned [mem 0x91200000-0x913fffff 64bit pref]
> pci 0000:00:1c.2: BAR 15: assigned [mem 0x91400000-0x915fffff 64bit pref]
> pci 0000:00:1c.3: BAR 14: assigned [mem 0x91600000-0x917fffff]
> pci 0000:00:1c.3: BAR 15: assigned [mem 0x91800000-0x919fffff 64bit pref]
> pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
> pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
> pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
> pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
> pci 0000:00:01.0: PCI bridge to [bus 01-01]
> pci 0000:00:01.0: bridge window [io disabled]
> pci 0000:00:01.0: bridge window [mem disabled]
> pci 0000:00:01.0: bridge window [mem pref disabled]
> pci 0000:00:05.0: PCI bridge to [bus 02-02]
> pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
> pci 0000:00:05.0: bridge window [mem 0x90a00000-0x90afffff]
> pci 0000:00:05.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
> pci 0000:04:00.0: PCI bridge to [bus 05-05]
> pci 0000:04:00.0: bridge window [io disabled]
> pci 0000:04:00.0: bridge window [mem disabled]
> pci 0000:04:00.0: bridge window [mem pref disabled]
> pci 0000:04:01.0: PCI bridge to [bus 06-06]
> pci 0000:04:01.0: bridge window [io disabled]
> pci 0000:04:01.0: bridge window [mem disabled]
> pci 0000:04:01.0: bridge window [mem pref disabled]
> pci 0000:04:02.0: PCI bridge to [bus 07-07]
> pci 0000:04:02.0: bridge window [io 0x1000-0x1fff]
> pci 0000:04:02.0: bridge window [mem 0x90000000-0x908fffff]
> pci 0000:04:02.0: bridge window [mem pref disabled]
> pci 0000:03:00.0: PCI bridge to [bus 04-07]
> pci 0000:03:00.0: bridge window [io 0x1000-0x1fff]
> pci 0000:03:00.0: bridge window [mem 0x90000000-0x908fffff]
> pci 0000:03:00.0: bridge window [mem pref disabled]
> pci 0000:03:00.3: PCI bridge to [bus 08-08]
> pci 0000:03:00.3: bridge window [io disabled]
> pci 0000:03:00.3: bridge window [mem disabled]
> pci 0000:03:00.3: bridge window [mem pref disabled]
> pci 0000:00:09.0: PCI bridge to [bus 03-08]
> pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
> pci 0000:00:09.0: bridge window [mem 0x90000000-0x908fffff]
> pci 0000:00:09.0: bridge window [mem pref disabled]
> pci 0000:00:1c.0: PCI bridge to [bus 09-09]
> pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
> pci 0000:00:1c.0: bridge window [mem 0x90c00000-0x90dfffff]
> pci 0000:00:1c.0: bridge window [mem 0x90e00000-0x90ffffff 64bit pref]
> pci 0000:00:1c.1: PCI bridge to [bus 0a-0a]
> pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
> pci 0000:00:1c.1: bridge window [mem 0x91000000-0x911fffff]
> pci 0000:00:1c.1: bridge window [mem 0x91200000-0x913fffff 64bit pref]
> pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
> pci 0000:0b:00.0: bridge window [io disabled]
> pci 0000:0b:00.0: bridge window [mem 0x90900000-0x909fffff]
> pci 0000:0b:00.0: bridge window [mem pref disabled]
> pci 0000:00:1c.2: PCI bridge to [bus 0b-0c]
> pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
> pci 0000:00:1c.2: bridge window [mem 0x90900000-0x909fffff]
> pci 0000:00:1c.2: bridge window [mem 0x91400000-0x915fffff 64bit pref]
> pci 0000:00:1c.3: PCI bridge to [bus 0d-0d]
> pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
> pci 0000:00:1c.3: bridge window [mem 0x91600000-0x917fffff]
> pci 0000:00:1c.3: bridge window [mem 0x91800000-0x919fffff 64bit pref]
> pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
> pci 0000:00:1e.0: bridge window [io disabled]
> pci 0000:00:1e.0: bridge window [mem disabled]
> pci 0000:00:1e.0: bridge window [mem pref disabled]
> alloc irq_desc for 16 on node -1
> alloc kstat_irqs on node -1
> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:01.0: setting latency timer to 64
> pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:05.0: setting latency timer to 64
> pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:09.0: setting latency timer to 64
> pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:03:00.0: setting latency timer to 64
> pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:04:00.0: setting latency timer to 64
> alloc irq_desc for 17 on node -1
> alloc kstat_irqs on node -1
> pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:04:01.0: setting latency timer to 64
> alloc irq_desc for 18 on node -1
> alloc kstat_irqs on node -1
> pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> pci 0000:04:02.0: setting latency timer to 64
> pci 0000:03:00.3: setting latency timer to 64
> pci 0000:00:1c.0: enabling device (0000 -> 0003)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.1: enabling device (0000 -> 0003)
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:0b:00.0: setting latency timer to 64
> pci 0000:00:1c.3: enabling device (0000 -> 0003)
> alloc irq_desc for 19 on node -1
> alloc kstat_irqs on node -1
> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> pci 0000:00:1c.3: setting latency timer to 64
> pci 0000:00:1e.0: power state changed by ACPI to D0
> pci 0000:00:1e.0: power state changed by ACPI to D0
> pci 0000:00:1e.0: setting latency timer to 64
> pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
> pci_bus 0000:00: resource 8 [mem 0x80000000-0xfe000000]
> pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
> pci_bus 0000:02: resource 1 [mem 0x90a00000-0x90afffff]
> pci_bus 0000:02: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
> pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
> pci_bus 0000:03: resource 1 [mem 0x90000000-0x908fffff]
> pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
> pci_bus 0000:04: resource 1 [mem 0x90000000-0x908fffff]
> pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
> pci_bus 0000:07: resource 1 [mem 0x90000000-0x908fffff]
> pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
> pci_bus 0000:09: resource 1 [mem 0x90c00000-0x90dfffff]
> pci_bus 0000:09: resource 2 [mem 0x90e00000-0x90ffffff 64bit pref]
> pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
> pci_bus 0000:0a: resource 1 [mem 0x91000000-0x911fffff]
> pci_bus 0000:0a: resource 2 [mem 0x91200000-0x913fffff 64bit pref]
> pci_bus 0000:0b: resource 0 [io 0x6000-0x6fff]
> pci_bus 0000:0b: resource 1 [mem 0x90900000-0x909fffff]
> pci_bus 0000:0b: resource 2 [mem 0x91400000-0x915fffff 64bit pref]
> pci_bus 0000:0c: resource 1 [mem 0x90900000-0x909fffff]
> pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff]
> pci_bus 0000:0d: resource 1 [mem 0x91600000-0x917fffff]
> pci_bus 0000:0d: resource 2 [mem 0x91800000-0x919fffff 64bit pref]
> pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
> pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
> pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:0e: resource 7 [mem 0x000d8000-0x000dbfff]
> pci_bus 0000:0e: resource 8 [mem 0x80000000-0xfe000000]
> NET: Registered protocol family 2
> IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
> TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> UDP hash table entries: 4096 (order: 5, 131072 bytes)
> UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> NET: Registered protocol family 1
> pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
> pci 0000:02:00.0: Boot video device
> PCI: CLS mismatch (256 != 64), using 64 bytes
> Trying to unpack rootfs image as initramfs...
> Freeing initrd memory: 12824k freed
> IOMMU 2 0xfe719000: using Register based invalidation
> IOMMU 1 0xfe714000: using Register based invalidation
> IOMMU 0 0xfe710000: using Register based invalidation
> IOMMU 3 0xfe718000: using Register based invalidation
> IOMMU: Setting RMRR:
> IOMMU: Prepare 0-16MiB unity mapping for LPC
> IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
> alloc irq_desc for 40 on node 0
> alloc kstat_irqs on node 0
> alloc irq_desc for 41 on node 0
> alloc kstat_irqs on node 0
> alloc irq_desc for 42 on node 0
> alloc kstat_irqs on node 0
> alloc irq_desc for 43 on node 0
> alloc kstat_irqs on node 0
> PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
> audit: initializing netlink socket (disabled)
> type=2000 audit(1278512489.009:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 16109
> SELinux: Registering netfilter hooks
> alg: No test for stdrng (krng)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pcieport 0000:00:01.0: setting latency timer to 64
> alloc irq_desc for 44 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:01.0: irq 44 for MSI/MSI-X
> pcieport 0000:00:05.0: setting latency timer to 64
> alloc irq_desc for 45 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:05.0: irq 45 for MSI/MSI-X
> pcieport 0000:00:09.0: setting latency timer to 64
> alloc irq_desc for 46 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:09.0: irq 46 for MSI/MSI-X
> pcieport 0000:00:1c.0: setting latency timer to 64
> alloc irq_desc for 47 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:1c.0: irq 47 for MSI/MSI-X
> pcieport 0000:00:1c.1: setting latency timer to 64
> alloc irq_desc for 48 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:1c.1: irq 48 for MSI/MSI-X
> pcieport 0000:00:1c.2: setting latency timer to 64
> alloc irq_desc for 49 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:1c.2: irq 49 for MSI/MSI-X
> pcieport 0000:00:1c.3: setting latency timer to 64
> alloc irq_desc for 50 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:00:1c.3: irq 50 for MSI/MSI-X
> pcieport 0000:03:00.0: setting latency timer to 64
> pcieport 0000:04:00.0: setting latency timer to 64
> alloc irq_desc for 51 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:04:00.0: irq 51 for MSI/MSI-X
> pcieport 0000:04:01.0: setting latency timer to 64
> alloc irq_desc for 52 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:04:01.0: irq 52 for MSI/MSI-X
> pcieport 0000:04:02.0: setting latency timer to 64
> alloc irq_desc for 53 on node -1
> alloc kstat_irqs on node -1
> pcieport 0000:04:02.0: irq 53 for MSI/MSI-X
> aer 0000:00:01.0:pcie02: service driver aer loaded
> aer 0000:00:05.0:pcie02: service driver aer loaded
> aer 0000:00:09.0:pcie02: service driver aer loaded
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> pci-stub: invalid id string ""
> input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> ACPI: Power Button [PWRB]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> ACPI: Power Button [PWRF]
> ACPI: acpi_idle registered with cpuidle
> Monitor-Mwait will be used to enter C-1 state
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> brd: module loaded
> loop: module loaded
> ata_piix 0000:00:1f.1: version 2.13
> alloc irq_desc for 20 on node -1
> alloc kstat_irqs on node -1
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> ata_piix 0000:00:1f.1: setting latency timer to 64
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/100 cmd 0x30e8 ctl 0x30fc bmdma 0x30c0 irq 20
> ata2: PATA max UDMA/100 cmd 0x30e0 ctl 0x30f8 bmdma 0x30c8 irq 20
> alloc irq_desc for 21 on node -1
> alloc kstat_irqs on node -1
> ata_piix 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> ata_piix 0000:00:1f.2: setting latency timer to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 21
> ata4: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 21
> Fixed MDIO Bus: probed
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
> ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90b08400
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.35-rc3+ ehci_hcd
> usb usb1: SerialNumber: 0000:00:1d.7
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: irq 19, io base 0x000030a0
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd
> usb usb2: SerialNumber: 0000:00:1d.0
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003080
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd
> usb usb3: SerialNumber: 0000:00:1d.1
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003060
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd
> usb usb4: SerialNumber: 0000:00:1d.2
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> alloc irq_desc for 22 on node -1
> alloc kstat_irqs on node -1
> uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
> uhci_hcd 0000:00:1d.3: setting latency timer to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.3
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> rtc_cmos 00:07: RTC can wake from S4
> rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@...hat.com
> cpuidle: using governor ladder
> cpuidle: using governor menu
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
> nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> NET: Registered protocol family 17
> PM: Resume from disk failed.
> registered taskstats version 1
> IMA: No TPM chip found, activating TPM-bypass!
> Magic number: 2:837:383
> usb usb1: hash matches
> rtc_cmos 00:07: setting system clock to 2010-07-07 14:21:29 UTC (1278512489)
> Initalizing network drop monitor service
> ata1.00: ATAPI: PIONEER DVD-RW DVR-112D, BC14, max UDMA/66
> ata3.00: ATA-8: ST3750330AS, SD15, max UDMA/133
> ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata1.00: configured for UDMA/66
> scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D BC14 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 0:0:0:0: Attached scsi CD-ROM sr0
> sr 0:0:0:0: Attached scsi generic sg0 type 5
> ata3.01: ATA-7: ST3320820AS_P, 3.BQE, max UDMA/133
> ata3.01: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32)
> ata4.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133
> ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata3.00: configured for UDMA/133
> ata3.01: configured for UDMA/133
> scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1
> scsi 2:0:1:0: Direct-Access ATA ST3320820AS_P 3.BQ PQ: 0 ANSI: 5
> sd 2:0:1:0: Attached scsi generic sg2 type 0
> sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> sd 2:0:1:0: [sdb] Write Protect is off
> sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>
> sdb:
> sd 2:0:0:0: [sda] Attached SCSI disk
> ata4.00: configured for UDMA/133
> scsi 3:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5
> sd 3:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
> sd 3:0:0:0: Attached scsi generic sg3 type 0
> sd 3:0:0:0: [sdc] Write Protect is off
> sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sdc: sdb1 sdb2
> sd 2:0:1:0: [sdb] Attached SCSI disk
> sdc1 sdc2 sdc3 sdc4 sdc5
> sd 3:0:0:0: [sdc] Attached SCSI disk
> Freeing unused kernel memory: 1508k freed
> Write protecting the kernel read-only data: 10240k
> Freeing unused kernel memory: 1816k freed
> Freeing unused kernel memory: 1968k freed
> dracut: dracut-005-3.fc13
> udev: starting version 151
> [drm] Initialized drm 1.1.0 20060810
> [drm] VGACON disable radeon kernel modesetting.
> pci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> pci 0000:02:00.0: setting latency timer to 64
> [drm] Initialized radeon 1.33.0 20080528 for 0000:02:00.0 on minor 0
> dracut: Starting plymouth daemon
> firewire_ohci 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> usb 2-1: new full speed USB device using uhci_hcd and address 2
> firewire_ohci: Added fw-ohci device 0000:0c:00.0, OHCI v1.10, 8 IR + 8
> IT contexts, quirks 0x2
> usb 2-1: New USB device found, idVendor=05a4, idProduct=9835
> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-1: Product: USB Keyboard Hub
> usb 2-1: Manufacturer: ORTEK
> hub 2-1:1.0: USB hub found
> hub 2-1:1.0: 3 ports detected
> usb 4-2: new full speed USB device using uhci_hcd and address 2
> firewire_core: created device fw0: GUID 001ff3fffe8908b0, S800
> firewire_core: phy config: card 0, new root=ffc1, gap_count=5
> usb 4-2: New USB device found, idVendor=05ac, idProduct=1000
> usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
> input: HID 05ac:1000 as
> /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
> generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard
> [HID 05ac:1000] on usb-0000:00:1d.2-2/input0
> dracut: Mounted root filesystem /dev/sdc2
> input: HID 05ac:1000 as
> /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input3
> generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse
> [HID 05ac:1000] on usb-0000:00:1d.2-2/input1
> dracut: Loading SELinux policy
> usb 2-1.3: new full speed USB device using uhci_hcd and address 3
> usb 2-1.3: New USB device found, idVendor=05a4, idProduct=9860
> usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-1.3: Product: USB Keyboard Hub
> usb 2-1.3: Manufacturer: ORTEK
> input: ORTEK USB Keyboard Hub as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4
> generic-usb 0003:05A4:9860.0003: input,hidraw2: USB HID v1.10 Keyboard
> [ORTEK USB Keyboard Hub] on usb-0000:00:1d.0-1.3/input0
> input: ORTEK USB Keyboard Hub as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input5
> generic-usb 0003:05A4:9860.0004: input,hidraw3: USB HID v1.10 Device
> [ORTEK USB Keyboard Hub] on usb-0000:00:1d.0-1.3/input1
> SELinux: 2048 avtab hash slots, 196346 rules.
> SELinux: 2048 avtab hash slots, 196346 rules.
> SELinux: 9 users, 13 roles, 3270 types, 159 bools, 1 sens, 1024 cats
> SELinux: 77 classes, 196346 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev sdc2, type ext4), uses xattr
> type=1403 audit(1278512491.340:2): policy loaded auid=4294967295 ses=4294967295
> dracut: Switching root
> readahead: starting
> udev: starting version 151
> usb 4-2: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
> usb 4-2: USB disconnect, address 2
> iTCO_vendor_support: vendor-support=0
> i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> ACPI: resource 0000:00:1f.3 [io 0x3000-0x301f] conflicts with ACPI
> region SMBI [mem 0x00003000-0x0000300f window]
> ACPI: If an ACPI driver is available for this device, you should use
> it instead of the native driver
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
> iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it
> usb 4-2: new full speed USB device using uhci_hcd and address 3
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> applesmc: Apple MacPro3 detected:
> applesmc: - Model without accelerometer
> applesmc: - Model without light sensors and backlight
> applesmc: - Model with 40 temperature sensors
> applesmc: device successfully initialized.
> applesmc: 4 fans found.
> applesmc: driver successfully loaded.
> usb 4-2: New USB device found, idVendor=05ac, idProduct=8206
> usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> i5k_amb: probe of i5k_amb.0 failed with error -16
> type=1400 audit(1278537694.813:3): avc: denied { mmap_zero } for
> pid=754 comm="vbetool"
> scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023
> tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
> EDAC MC: Ver: 2.1.0 Jun 29 2010
> EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0
> EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC
> PCI controller': DEV '0000:00:10.0' (POLLED)
> Bluetooth: Core ver 2.15
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: Generic Bluetooth USB driver ver 0.6
> usbcore: registered new interface driver btusb
> alloc irq_desc for 23 on node -1
> alloc kstat_irqs on node -1
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> alloc irq_desc for 54 on node -1
> alloc kstat_irqs on node -1
> HDA Intel 0000:00:1b.0: irq 54 for MSI/MSI-X
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
> e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
> e1000e 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> e1000e 0000:07:00.0: setting latency timer to 64
> alloc irq_desc for 55 on node -1
> alloc kstat_irqs on node -1
> e1000e 0000:07:00.0: irq 55 for MSI/MSI-X
> e1000e 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:1f:5b:39:85:28
> e1000e 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection
> e1000e 0000:07:00.0: eth0: MAC: 5, PHY: 5, PBA No: 3070ff-0ff
> e1000e 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> e1000e 0000:07:00.1: setting latency timer to 64
> alloc irq_desc for 56 on node -1
> alloc kstat_irqs on node -1
> e1000e 0000:07:00.1: irq 56 for MSI/MSI-X
> hda_codec: ALC889A: SKU not ready 0x400000f0
> input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
> e1000e 0000:07:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:1f:5b:39:85:29
> e1000e 0000:07:00.1: eth1: Intel(R) PRO/1000 Network Connection
> e1000e 0000:07:00.1: eth1: MAC: 5, PHY: 5, PBA No: 3070ff-0ff
> EXT4-fs (sdc2): re-mounted. Opts: (null)
> EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
> SELinux: initialized (dev sdc1, type ext4), uses xattr
> EXT3-fs: barriers not enabled
> kjournald starting. Commit interval 5 seconds
> EXT3-fs (sdc5): using internal journal
> EXT3-fs (sdc5): mounted filesystem with ordered data mode
> SELinux: initialized (dev sdc5, type ext3), uses xattr
> Adding 9215996k swap on /dev/sdc4. Priority:-1 extents:1 across:9215996k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> e1000e 0000:07:00.0: irq 55 for MSI/MSI-X
> e1000e 0000:07:00.0: irq 55 for MSI/MSI-X
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> Bluetooth: L2CAP ver 2.14
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bridge firewalling registered
> Bluetooth: SCO (Voice Link) ver 0.6
> Bluetooth: SCO socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM ver 1.11
> fuse init (API version 7.14)
> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
> dca service started, version 1.12.1
> ioatdma: Intel(R) QuickData Technology Driver 4.00
> ioatdma 0000:00:0f.0: can't derive routing for PCI INT A
> ioatdma 0000:00:0f.0: PCI INT A: no GSI
> ioatdma 0000:00:0f.0: setting latency timer to 64
> alloc irq_desc for 57 on node -1
> alloc kstat_irqs on node -1
> ioatdma 0000:00:0f.0: irq 57 for MSI/MSI-X
> alloc irq_desc for 58 on node -1
> alloc kstat_irqs on node -1
> ioatdma 0000:00:0f.0: irq 58 for MSI/MSI-X
> alloc irq_desc for 59 on node -1
> alloc kstat_irqs on node -1
> ioatdma 0000:00:0f.0: irq 59 for MSI/MSI-X
> alloc irq_desc for 60 on node -1
> alloc kstat_irqs on node -1
> ioatdma 0000:00:0f.0: irq 60 for MSI/MSI-X
> ioatdma 0000:00:0f.0: failed to start channel chanerr: 0x10
> ioatdma 0000:00:0f.0: Freeing 1 in use descriptors!
> ioatdma 0000:00:0f.0: selftest cannot allocate chan resource
> ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
> ioatdma 0000:00:0f.0: can't derive routing for PCI INT A
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists