| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 12 Jul 2010 17:15:44 +0200
From: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
To: linux-kernel@...r.kernel.org
Cc: trivial@...nel.org
Subject: [PATCH 1/3] trivial: fix typos concerning "empty"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
---
Documentation/scsi/ChangeLog.lpfc | 2 +-
arch/arm/plat-mxc/dma-mx1-mx2.c | 2 +-
drivers/scsi/aic7xxx_old/aic7xxx.seq | 2 +-
drivers/serial/nwpserial.c | 2 +-
sound/usb/pcm.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index e759e92..337c924 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -807,7 +807,7 @@ Changes from 20040908 to 20040920
lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
remove checking of list emptiness before calling lpfc_disc_done,
- it handles the emtpy list case just fine and the additional
+ it handles the empty list case just fine and the additional
instructions cost less then the bustlocked spinlock operations.
* Integrated patch from Christoph Hellwig: This adds a new 64bit
counter instead, brd_no isn't reused anymore. Also some tiny
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 3765ac0..68988af 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -310,7 +310,7 @@ imx_dma_setup_sg(int channel,
imxdma->resbytes = dma_length;
if (!sg || !sgcount) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
channel);
return -EINVAL;
}
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index f6fc4b7..5997e7c 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -615,7 +615,7 @@ ultra2_dmafifoflush:
* went empty and the next bit of data is copied from
* the SCSI fifo into the PCI fifo. It should only
* come on when both FIFOs (meaning the entire FIFO
- * chain) are emtpy. Since it can take up to 4 cycles
+ * chain) are empty. Since it can take up to 4 cycles
* for new data to be copied from the SCSI fifo into
* the PCI fifo, testing for FIFOEMP status for 4
* extra times gives the needed time for any
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa9..e65b0d9 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
- /* wait for transmitter to become emtpy */
+ /* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
cpu_relax();
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 4568298..3634ced 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -636,7 +636,7 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params,
min_datainterval = min(min_datainterval, fp->datainterval);
}
if (min_datainterval == 0xff) {
- hwc_debug(" --> get emtpy\n");
+ hwc_debug(" --> get empty\n");
it->empty = 1;
return -EINVAL;
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists