| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.00.1007121803000.18654@p34.internal.lan>
Date: Mon, 12 Jul 2010 18:03:59 -0400 (EDT)
From: Justin Piszcz <jpiszcz@...idpixels.com>
To: linux-kernel@...r.kernel.org
cc: linux-scsi@...r.kernel.org
Subject: Re: 2.6.34.1: link online but device misclassifed / input/output
error
Hi,
The marvell controller was set to IDE mode and not RAID, after it was set
to AHCI, the smart status returned OK.
Still kind of annoying though the marvell 88SE6145 does not support port
multipliers.
Justin.
On Mon, 12 Jul 2010, Justin Piszcz wrote:
> Hello,
>
> I have two thermaltake docks with two 150GB velociraptors.
>
> It happens on both drives, each on a separate thermaltake dock.
>
> When I run smartctl -a, it hangs when it tries to read the self-test log:
>
> # smartctl -a /dev/sdd
> smartctl 5.40 2010-03-16 r3077 [x86_64-unknown-linux-gnu] (local build)
> Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital VelociRaptor family
> Device Model: WDC WD1500HLFS-01G6U3
> Serial Number: --------------
> Firmware Version: 04.04V05
> User Capacity: 150,039,945,216 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 8
> ATA Standard is: Exact ATA specification draft version not indicated
> Local Time is: Mon Jul 12 16:33:13 2010 EDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> Error SMART Thresholds Read failed: Input/output error
> Smartctl: SMART Read Thresholds failed.
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x80) Offline data collection activity
> was never started.
> Auto Offline Data Collection:
> Enabled.
> Self-test execution status: ( 0) The previous self-test routine
> completed
> without error or no self-test has
> ever
> been run.
> Total time to complete Offline data collection: (2400)
> seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off
> support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 32) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x303f) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 100 253 --- Pre-fail Always
> - 0
> 3 Spin_Up_Time 0x0003 200 200 --- Pre-fail Always
> - 2991
> 4 Start_Stop_Count 0x0032 100 100 --- Old_age Always
> - 10
> 5 Reallocated_Sector_Ct 0x0033 200 200 --- Pre-fail Always
> - 0
> 7 Seek_Error_Rate 0x000e 100 253 --- Old_age Always
> - 0
> 9 Power_On_Hours 0x0032 100 100 --- Old_age Always
> - 0
> 10 Spin_Retry_Count 0x0012 100 253 --- Old_age Always
> - 0
> 11 Calibration_Retry_Count 0x0012 100 253 --- Old_age Always
> - 0
> 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always
> - 10
> 192 Power-Off_Retract_Count 0x0032 200 200 --- Old_age Always
> - 9
> 193 Load_Cycle_Count 0x0032 200 200 --- Old_age Always
> - 10
> 194 Temperature_Celsius 0x0022 122 116 --- Old_age Always
> - 25
> 196 Reallocated_Event_Count 0x0032 200 200 --- Old_age Always
> - 0
> 197 Current_Pending_Sector 0x0012 200 200 --- Old_age Always
> - 0
> 198 Offline_Uncorrectable 0x0010 100 253 --- Old_age Offline
> - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 --- Old_age Offline
> - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
>
> Error SMART Read Selective Self-Test Log failed: Input/output error
> Smartctl: SMART Selective Self Test Log Read Failed
> p34:~#
>
> --
>
> [ 112.535712] ata10: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe
> frozen
> [ 112.535717] ata10: irq_stat 0x02400000, PHY RDY changed
> [ 112.535725] ata10: hard resetting link
> [ 116.981140] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 116.990551] ata10.00: ATA-8: WDC WD1500HLFS-01G6U1, 04.04V02, max UDMA/133
> [ 116.990557] ata10.00: 293046768 sectors, multi 0: LBA48 [ 116.994261]
> ata10.00: configured for UDMA/133
> [ 116.994265] ata10: EH complete
> [ 116.994389] scsi 11:0:0:0: Direct-Access ATA WDC WD1500HLFS-0
> 04.0 PQ: 0 ANSI: 5
> [ 116.994493] sd 11:0:0:0: [sdc] 293046768 512-byte logical blocks: (150
> GB/139 GiB)
> [ 116.994513] sd 11:0:0:0: [sdc] Write Protect is off
> [ 116.994514] sd 11:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 116.994523] sd 11:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 116.994579] sdc: unknown partition table
> [ 117.003178] sd 11:0:0:0: [sdc] Attached SCSI disk
> [ 154.893776] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> frozen
> [ 154.893783] ata10.00: failed command: SMART
> [ 154.893792] ata10.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio
> 512 in
> [ 154.893794] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
> (timeout)
> [ 154.893797] ata10.00: status: { DRDY }
> [ 154.893803] ata10: hard resetting link
> [ 155.198680] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 155.198691] ata10.00: link online but device misclassifed
> [ 155.206089] ata10.00: configured for UDMA/133
> [ 155.206108] ata10: EH complete
> [ 176.286644] ata9: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
> [ 176.286649] ata9: irq_stat 0x02400000, PHY RDY changed
> [ 176.286657] ata9: hard resetting link
> [ 178.889785] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> frozen
> [ 178.889791] ata10.00: failed command: SMART
> [ 178.889800] ata10.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio
> 512 in
> [ 178.889802] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
> (timeout)
> [ 178.889806] ata10.00: status: { DRDY }
> [ 178.889810] ata10: hard resetting link
> [ 179.194749] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 179.194761] ata10.00: link online but device misclassifed
> [ 179.202676] ata10.00: configured for UDMA/133
> [ 179.202691] ata10: EH complete
> [ 181.853312] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 181.864114] ata9.00: ATA-8: WDC WD1500HLFS-01G6U3, 04.04V05, max UDMA/133
> [ 181.864119] ata9.00: 293046768 sectors, multi 0: LBA48 [ 181.867582]
> ata9.00: configured for UDMA/133
> [ 181.867590] ata9: EH complete
> [ 181.867747] scsi 10:0:0:0: Direct-Access ATA WDC WD1500HLFS-0
> 04.0 PQ: 0 ANSI: 5
> [ 181.867908] sd 10:0:0:0: [sdd] 293046768 512-byte logical blocks: (150
> GB/139 GiB)
> [ 181.867927] sd 10:0:0:0: [sdd] Write Protect is off
> [ 181.867928] sd 10:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 181.867936] sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 181.867990] sdd: unknown partition table
> [ 181.870859] sd 10:0:0:0: [sdd] Attached SCSI disk
> [ 203.888696] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> frozen
> [ 203.888705] ata9.00: failed command: SMART
> [ 203.888717] ata9.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512
> in
> [ 203.888719] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
> (timeout)
> [ 203.888725] ata9.00: status: { DRDY }
> [ 203.888733] ata9: hard resetting link
> [ 204.193579] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 204.193590] ata9.00: link online but device misclassifed
> [ 204.200938] ata9.00: configured for UDMA/133
> [ 204.200956] ata9: EH complete
>
> Justin.
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists