| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1278926979-15070-1-git-send-email-revent82@gmail.com>
Date: Mon, 12 Jul 2010 15:29:39 +0600
From: Gorskin Ilya <revent82@...il.com>
To: gregkh@...e.de
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Gorskin Ilya <revent82@...il.com>,
Ilya Gorskin <Revent82@...il.com>
Subject: [PATCH] Staging:dt3155: fix code style generated by checkpatch.pl in dt3155_drv.c.
This is a patch to the dt3155_drv.c file that fixes up a warning & errors
found by the checkpatch.pl tool.
Signed-off-by: Ilya Gorskin <Revent82@...il.com>
---
drivers/staging/dt3155/dt3155_drv.c | 952 ++++++++++++++++-------------------
1 files changed, 445 insertions(+), 507 deletions(-)
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index 40ef97f..d23f013 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -1,7 +1,7 @@
/*
Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
- Jason Lapenta, Scott Smedley, Greg Sharp
+ Jason Lapenta, Scott Smedley, Greg Sharp
This file is part of the DT3155 Device Driver.
@@ -27,14 +27,14 @@ MA 02111-1307 USA
03-Jul-2000 JML n/a
10-Oct-2001 SS port to 2.4 kernel
02-Apr-2002 SS Mods to use allocator as a standalone module;
- Merged John Roll's changes (john@....harvard.edu)
- to make work with multiple boards.
+ Merged John Roll's changes (john@....harvard.edu)
+ to make work with multiple boards.
02-Jul-2002 SS Merged James Rose's chages (rosejr@...due.edu) to:
- * fix successive interrupt-driven captures
- * add select/poll support.
+ * fix successive interrupt-driven captures
+ * add select/poll support.
10-Jul-2002 GCS Add error check when ndevices > MAXBOARDS.
02-Aug-2002 GCS Fix field mode so that odd (lower) field is stored
- in lower half of buffer.
+ in lower half of buffer.
05-Aug-2005 SS port to 2.6 kernel.
26-Oct-2009 SS port to 2.6.30 kernel.
@@ -65,8 +65,8 @@ extern void printques(int);
#include <linux/sched.h>
#include <linux/smp_lock.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include "dt3155.h"
#include "dt3155_drv.h"
@@ -89,16 +89,16 @@ int dt3155_errno = 0;
#define MAXPCI 16
#ifdef DT_DEBUG
-#define DT_3155_DEBUG_MSG(x,y) printk(x,y)
+#define DT_3155_DEBUG_MSG(x, y) printk(x, y)
#else
-#define DT_3155_DEBUG_MSG(x,y)
+#define DT_3155_DEBUG_MSG(x, y)
#endif
/* wait queue for interrupts */
wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
#define DT_3155_SUCCESS 0
-#define DT_3155_FAILURE -EIO
+#define DT_3155_FAILURE (-EIO)
/* set to dynamicaly allocate, but it is tunable: */
/* insmod DT_3155 dt3155 dt3155_major=XX */
@@ -138,9 +138,9 @@ u32 unique_tag = 0;;
* to idle. I don't know why this works and the other way doesn't.
* (James Rose)
*/
-static void quick_stop (int minor)
+static void quick_stop(int minor)
{
- // TODO: scott was here
+ /* TODO: scott was here */
#if 1
ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* disable interrupts */
@@ -170,247 +170,220 @@ static void quick_stop (int minor)
*****************************************************/
static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
{
- int minor = -1;
- int index;
- unsigned long flags;
- u32 buffer_addr;
+ int minor = -1;
+ int index;
+ unsigned long flags;
+ u32 buffer_addr;
/* find out who issued the interrupt */
- for (index = 0; index < ndevices; index++) {
- if(dev_id == (void*) &dt3155_status[index])
- {
- minor = index;
- break;
- }
- }
+ for (index = 0; index < ndevices; index++) {
+ if (dev_id == (void *) &dt3155_status[index]) {
+ minor = index;
+ break;
+ }
+ }
/* hopefully we should not get here */
- if (minor < 0 || minor >= MAXBOARDS) {
- printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
- return;
- }
+ if (minor < 0 || minor >= MAXBOARDS) {
+ printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
+ return;
+ }
/* Check for corruption and set a flag if so */
- ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
-
- if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD))
- {
- /* TODO: this should probably stop acquisition */
- /* and set some flags so that dt3155_read */
- /* returns an error next time it is called */
- dt3155_errno = DT_ERR_CORRUPT;
- printk("dt3155: corrupt field\n");
- return;
+ ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
+
+ if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD)) {
+ /* TODO: this should probably stop acquisition */
+ /* and set some flags so that dt3155_read */
+ /* returns an error next time it is called */
+ dt3155_errno = DT_ERR_CORRUPT;
+ printk("dt3155: corrupt field\n");
+ return;
}
- ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+ ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
- /* Handle the even field ... */
- if (int_csr_r.fld.FLD_END_EVE)
- {
- if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- dt3155_fbuffer[minor]->frame_count++;
+ /* Handle the even field ... */
+ if (int_csr_r.fld.FLD_END_EVE) {
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD) {
+ dt3155_fbuffer[minor]->frame_count++;
}
- ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
+ ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
- /* Clear the interrupt? */
- int_csr_r.fld.FLD_END_EVE = 1;
+ /* Clear the interrupt? */
+ int_csr_r.fld.FLD_END_EVE = 1;
- /* disable the interrupt if last field */
- if (dt3155_fbuffer[minor]->stop_acquire)
- {
- printk("dt3155: even stopped.\n");
- dt3155_fbuffer[minor]->even_stopped = 1;
- if (i2c_even_csr.fld.SNGL_EVE)
- {
- int_csr_r.fld.FLD_END_EVE_EN = 0;
- }
- else
- {
- i2c_even_csr.fld.SNGL_EVE = 1;
- }
- }
+ /* disable the interrupt if last field */
+ if (dt3155_fbuffer[minor]->stop_acquire) {
+ printk("dt3155: even stopped.\n");
+ dt3155_fbuffer[minor]->even_stopped = 1;
- WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+ if (i2c_even_csr.fld.SNGL_EVE)
+ int_csr_r.fld.FLD_END_EVE_EN = 0;
+ else
+ i2c_even_csr.fld.SNGL_EVE = 1;
+ }
- /* Set up next DMA if we are doing FIELDS */
- if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
- into the lower half of the buffer */
- const u32 stride = dt3155_status[minor].config.cols;
- buffer_addr = dt3155_fbuffer[minor]->
- frame_info[dt3155_fbuffer[minor]->active_buf].addr
- + (DT3155_MAX_ROWS / 2) * stride;
- local_save_flags(flags);
- local_irq_disable();
- wake_up_interruptible(&dt3155_read_wait_queue[minor]);
-
- /* Set up the DMA address for the next field */
- local_irq_restore(flags);
- WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+
+ /* Set up next DMA if we are doing FIELDS */
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE)
+ == DT3155_STATE_FLD) {
+ /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
+ into the lower half of the buffer */
+ const u32 stride = dt3155_status[minor].config.cols;
+ buffer_addr = dt3155_fbuffer[minor]->
+ frame_info[dt3155_fbuffer[minor]->active_buf].addr
+ + (DT3155_MAX_ROWS / 2) * stride;
+ local_save_flags(flags);
+ local_irq_disable();
+ wake_up_interruptible(&dt3155_read_wait_queue[minor]);
+ /* Set up the DMA address for the next field */
+ local_irq_restore(flags);
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
}
/* Check for errors. */
- i2c_even_csr.fld.DONE_EVE = 1;
- if (i2c_even_csr.fld.ERROR_EVE)
- dt3155_errno = DT_ERR_OVERRUN;
-
- WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
-
- /* Note that we actually saw an even field meaning */
- /* that subsequent odd field complete the frame */
- dt3155_fbuffer[minor]->even_happened = 1;
-
- /* recording the time that the even field finished, this should be */
- /* about time in the middle of the frame */
- do_gettimeofday(&(dt3155_fbuffer[minor]->
- frame_info[dt3155_fbuffer[minor]->
- active_buf].time));
- return;
+ i2c_even_csr.fld.DONE_EVE = 1;
+ if (i2c_even_csr.fld.ERROR_EVE)
+ dt3155_errno = DT_ERR_OVERRUN;
+
+ WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
+
+ /* Note that we actually saw an even field meaning */
+ /* that subsequent odd field complete the frame */
+ dt3155_fbuffer[minor]->even_happened = 1;
+
+ /* recording the time that the even field finished, this should be */
+ /* about time in the middle of the frame */
+ do_gettimeofday(&(dt3155_fbuffer[minor]->
+ frame_info[dt3155_fbuffer[minor]->
+ active_buf].time));
+ return;
}
/* ... now handle the odd field */
- if (int_csr_r.fld.FLD_END_ODD)
- {
- ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
+ if (int_csr_r.fld.FLD_END_ODD) {
+ ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
- /* Clear the interrupt? */
- int_csr_r.fld.FLD_END_ODD = 1;
+ /* Clear the interrupt? */
+ int_csr_r.fld.FLD_END_ODD = 1;
- if (dt3155_fbuffer[minor]->even_happened ||
- (dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- dt3155_fbuffer[minor]->frame_count++;
+ if (dt3155_fbuffer[minor]->even_happened ||
+ (dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD) {
+ dt3155_fbuffer[minor]->frame_count++;
}
- if (dt3155_fbuffer[minor]->stop_acquire &&
- dt3155_fbuffer[minor]->even_stopped)
- {
- printk(KERN_DEBUG "dt3155: stopping odd..\n");
- if (i2c_odd_csr.fld.SNGL_ODD)
- {
- /* disable interrupts */
- int_csr_r.fld.FLD_END_ODD_EN = 0;
- dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
-
- /* mark the system stopped: */
- dt3155_status[minor].state |= DT3155_STATE_IDLE;
- dt3155_fbuffer[minor]->stop_acquire = 0;
- dt3155_fbuffer[minor]->even_stopped = 0;
-
- printk(KERN_DEBUG "dt3155: state is now %x\n",
- dt3155_status[minor].state);
- }
- else
- {
- i2c_odd_csr.fld.SNGL_ODD = 1;
- }
+ if (dt3155_fbuffer[minor]->stop_acquire &&
+ dt3155_fbuffer[minor]->even_stopped) {
+ printk(KERN_DEBUG "dt3155: stopping odd..\n");
+ if (i2c_odd_csr.fld.SNGL_ODD) {
+ /* disable interrupts */
+ int_csr_r.fld.FLD_END_ODD_EN = 0;
+ dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
+
+ /* mark the system stopped: */
+ dt3155_status[minor].state |= DT3155_STATE_IDLE;
+ dt3155_fbuffer[minor]->stop_acquire = 0;
+ dt3155_fbuffer[minor]->even_stopped = 0;
+
+ printk(KERN_DEBUG "dt3155: state is now %x\n",
+ dt3155_status[minor].state);
+ } else {
+ i2c_odd_csr.fld.SNGL_ODD = 1;
+ }
}
- WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* if the odd field has been acquired, then */
/* change the next dma location for both fields */
/* and wake up the process if sleeping */
- if (dt3155_fbuffer[minor]->even_happened ||
- (dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
+ if (dt3155_fbuffer[minor]->even_happened ||
+ (dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD) {
- local_save_flags(flags);
- local_irq_disable();
+ local_save_flags(flags);
+ local_irq_disable();
#ifdef DEBUG_QUES_B
- printques(minor);
+ printques(minor);
#endif
- if (dt3155_fbuffer[minor]->nbuffers > 2)
- {
- if (!are_empty_buffers(minor))
- {
- /* The number of active + locked buffers is
- * at most 2, and since there are none empty, there
- * must be at least nbuffers-2 ready buffers.
- * This is where we 'drop frames', oldest first. */
- push_empty(pop_ready(minor), minor);
+ if (dt3155_fbuffer[minor]->nbuffers > 2) {
+ if (!are_empty_buffers(minor)) {
+ /* The number of active + locked buffers is
+ * at most 2, and since there are none empty, there
+ * must be at least nbuffers-2 ready buffers.
+ * This is where we 'drop frames', oldest first. */
+ push_empty(pop_ready(minor), minor);
}
- /* The ready_que can't be full, since we know
- * there is one active buffer right now, so it's safe
- * to push the active buf on the ready_que. */
- push_ready(minor, dt3155_fbuffer[minor]->active_buf);
- /* There's at least 1 empty -- make it active */
- dt3155_fbuffer[minor]->active_buf = pop_empty(minor);
- dt3155_fbuffer[minor]->
+ /* The ready_que can't be full, since we know
+ * there is one active buffer right now, so it's safe
+ * to push the active buf on the ready_que. */
+ push_ready(minor, dt3155_fbuffer[minor]->active_buf);
+ /* There's at least 1 empty -- make it active */
+ dt3155_fbuffer[minor]->active_buf = pop_empty(minor);
+ dt3155_fbuffer[minor]->
frame_info[dt3155_fbuffer[minor]->
- active_buf].tag = ++unique_tag;
- }
- else /* nbuffers == 2, special case */
- { /* There is 1 active buffer.
- * If there is a locked buffer, keep the active buffer
- * the same -- that means we drop a frame.
- */
- if (dt3155_fbuffer[minor]->locked_buf < 0)
- {
- push_ready(minor,
- dt3155_fbuffer[minor]->active_buf);
- if (are_empty_buffers(minor))
- {
- dt3155_fbuffer[minor]->active_buf =
- pop_empty(minor);
- }
- else
- { /* no empty or locked buffers, so use a readybuf */
- dt3155_fbuffer[minor]->active_buf =
- pop_ready(minor);
+ active_buf].tag = ++unique_tag;
+ } else { /* nbuffers == 2, special case */
+ /* There is 1 active buffer.
+ * If there is a locked buffer, keep the active buffer
+ * the same -- that means we drop a frame. */
+ if (dt3155_fbuffer[minor]->locked_buf < 0) {
+ push_ready(minor,
+ dt3155_fbuffer[minor]->active_buf);
+ if (are_empty_buffers(minor)) {
+ dt3155_fbuffer[minor]->active_buf =
+ pop_empty(minor);
+ } else {
+ /* no empty or locked buffers, so use a readybuf */
+ dt3155_fbuffer[minor]->active_buf =
+ pop_ready(minor);
+ }
}
}
- }
#ifdef DEBUG_QUES_B
- printques(minor);
+ printques(minor);
#endif
- dt3155_fbuffer[minor]->even_happened = 0;
+ dt3155_fbuffer[minor]->even_happened = 0;
- wake_up_interruptible(&dt3155_read_wait_queue[minor]);
+ wake_up_interruptible(&dt3155_read_wait_queue[minor]);
- local_irq_restore(flags);
+ local_irq_restore(flags);
}
/* Set up the DMA address for the next frame/field */
buffer_addr = dt3155_fbuffer[minor]->
frame_info[dt3155_fbuffer[minor]->active_buf].addr;
- if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
- }
- else
- {
- WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD) {
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
+ } else {
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
- WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
+ dt3155_status[minor].config.cols);
- }
+ }
/* Do error checking */
i2c_odd_csr.fld.DONE_ODD = 1;
- if (i2c_odd_csr.fld.ERROR_ODD)
+ if (i2c_odd_csr.fld.ERROR_ODD)
dt3155_errno = DT_ERR_OVERRUN;
- WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
+ WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
return;
}
/* If we get here, the Odd Field wasn't it either... */
- printk("neither even nor odd. shared perhaps?\n");
+ printk("neither even nor odd. shared perhaps?\n");
}
/*****************************************************
@@ -423,8 +396,7 @@ static void dt3155_init_isr(int minor)
{
const u32 stride = dt3155_status[minor].config.cols;
- switch (dt3155_status[minor].state & DT3155_STATE_MODE)
- {
+ switch (dt3155_status[minor].state & DT3155_STATE_MODE) {
case DT3155_STATE_FLD:
{
even_dma_start_r = dt3155_status[minor].
@@ -487,7 +459,7 @@ static void dt3155_init_isr(int minor)
csr1_r.fld.FLD_CRPT_EVE = 1; /* writing a 1 clears flags */
csr1_r.fld.FLD_CRPT_ODD = 1;
- WriteMReg((dt3155_lbase[minor] + CSR1),csr1_r.reg);
+ WriteMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
/* Enable interrupts at the end of each field */
@@ -522,102 +494,95 @@ static int dt3155_ioctl(struct inode *inode,
{
int minor = MINOR(inode->i_rdev); /* What device are we ioctl()'ing? */
- if (minor >= MAXBOARDS || minor < 0)
- return -ENODEV;
+ if (minor >= MAXBOARDS || minor < 0)
+ return -ENODEV;
/* make sure it is valid command */
- if (_IOC_NR(cmd) > DT3155_IOC_MAXNR)
- {
- printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
- printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
- (unsigned int)DT3155_GET_CONFIG,
- (unsigned int)DT3155_SET_CONFIG,
- (unsigned int)DT3155_START,
- (unsigned int)DT3155_STOP,
- (unsigned int)DT3155_FLUSH);
- return -EINVAL;
+ if (_IOC_NR(cmd) > DT3155_IOC_MAXNR) {
+ printk("DT3155: invalid IOCTL(0x%x)\n", cmd);
+ printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
+ (unsigned int)DT3155_GET_CONFIG,
+ (unsigned int)DT3155_SET_CONFIG,
+ (unsigned int)DT3155_START,
+ (unsigned int)DT3155_STOP,
+ (unsigned int)DT3155_FLUSH);
+ return -EINVAL;
}
- switch (cmd)
- {
+ switch (cmd) {
case DT3155_SET_CONFIG:
- {
+ {
if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- return -EBUSY;
+ return -EBUSY;
{
- struct dt3155_config tmp;
- if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
- return -EFAULT;
- /* check for valid settings */
- if (tmp.rows > DT3155_MAX_ROWS ||
- tmp.cols > DT3155_MAX_COLS ||
- (tmp.acq_mode != DT3155_MODE_FRAME &&
- tmp.acq_mode != DT3155_MODE_FIELD) ||
- (tmp.continuous != DT3155_SNAP &&
- tmp.continuous != DT3155_ACQ))
- {
- return -EINVAL;
+ struct dt3155_config tmp;
+ if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
+ return -EFAULT;
+ /* check for valid settings */
+ if (tmp.rows > DT3155_MAX_ROWS ||
+ tmp.cols > DT3155_MAX_COLS ||
+ (tmp.acq_mode != DT3155_MODE_FRAME &&
+ tmp.acq_mode != DT3155_MODE_FIELD) ||
+ (tmp.continuous != DT3155_SNAP &&
+ tmp.continuous != DT3155_ACQ)) {
+ return -EINVAL;
}
- dt3155_status[minor].config = tmp;
+ dt3155_status[minor].config = tmp;
}
return 0;
}
case DT3155_GET_CONFIG:
{
if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
- sizeof(struct dt3155_status)))
- return -EFAULT;
+ sizeof(struct dt3155_status)))
+ return -EFAULT;
return 0;
}
case DT3155_FLUSH: /* Flushes the buffers -- ensures fresh data */
{
if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- return -EBUSY;
+ return -EBUSY;
return dt3155_flush(minor);
}
case DT3155_STOP:
{
if (dt3155_status[minor].state & DT3155_STATE_STOP ||
dt3155_status[minor].fbuffer.stop_acquire)
- return -EBUSY;
+ return -EBUSY;
if (dt3155_status[minor].state == DT3155_STATE_IDLE)
- return 0;
+ return 0;
quick_stop(minor);
if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
- sizeof(struct dt3155_status)))
- return -EFAULT;
+ sizeof(struct dt3155_status)))
+ return -EFAULT;
return 0;
}
case DT3155_START:
{
if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- return -EBUSY;
+ return -EBUSY;
dt3155_status[minor].fbuffer.stop_acquire = 0;
dt3155_status[minor].fbuffer.frame_count = 0;
/* Set the MODE in the status -- we default to FRAME */
if (dt3155_status[minor].config.acq_mode == DT3155_MODE_FIELD)
- {
- dt3155_status[minor].state = DT3155_STATE_FLD;
- }
+ dt3155_status[minor].state = DT3155_STATE_FLD;
else
- {
- dt3155_status[minor].state = DT3155_STATE_FRAME;
- }
+ dt3155_status[minor].state = DT3155_STATE_FRAME;
dt3155_init_isr(minor);
if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
- sizeof(struct dt3155_status)))
- return -EFAULT;
+ sizeof(struct dt3155_status)))
+ return -EFAULT;
return 0;
}
default:
{
- printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
+ printk("DT3155: invalid IOCTL(0x%x)\n", cmd);
printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
(unsigned int)DT3155_GET_CONFIG,
(unsigned int)DT3155_SET_CONFIG,
@@ -637,38 +602,35 @@ static int dt3155_ioctl(struct inode *inode,
* It *looks* like it should work but since I'm not
* sure how to use it, I'm not actually sure. (NJC? ditto by SS)
*****************************************************/
-static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
+static int dt3155_mmap(struct file *file, struct vm_area_struct *vma)
{
/* which device are we mmapping? */
- int minor = MINOR(file->f_dentry->d_inode->i_rdev);
- unsigned long offset;
- offset = vma->vm_pgoff << PAGE_SHIFT;
+ int minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ unsigned long offset;
+ offset = vma->vm_pgoff << PAGE_SHIFT;
- if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
- vma->vm_flags |= VM_IO;
+ if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
+ vma->vm_flags |= VM_IO;
/* Don't try to swap out physical pages.. */
- vma->vm_flags |= VM_RESERVED;
+ vma->vm_flags |= VM_RESERVED;
/* they are mapping the registers or the buffer */
- if ((offset == dt3155_status[minor].reg_addr &&
- vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
- (offset == dt3155_status[minor].mem_addr &&
- vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size))
- {
- if (remap_pfn_range(vma,
- vma->vm_start,
- offset >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot)) {
- printk("DT3155: remap_page_range() failed.\n");
- return -EAGAIN;
+ if ((offset == dt3155_status[minor].reg_addr &&
+ vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
+ (offset == dt3155_status[minor].mem_addr &&
+ vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size)) {
+ if (remap_pfn_range(vma,
+ vma->vm_start,
+ offset >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot)) {
+ printk("DT3155: remap_page_range() failed.\n");
+ return -EAGAIN;
}
- }
- else
- {
- printk("DT3155: dt3155_mmap() bad call.\n");
- return -ENXIO;
+} else {
+ printk("DT3155: dt3155_mmap() bad call.\n");
+ return -ENXIO;
}
return 0;
@@ -682,40 +644,39 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
* MOD_INC_USE_COUNT make sure that the driver memory is not freed
* while the device is in use.
*****************************************************/
-static int dt3155_open(struct inode* inode, struct file* filep)
+static int dt3155_open(struct inode *inode, struct file *filep)
{
int minor = MINOR(inode->i_rdev); /* what device are we opening? */
- if (dt3155_dev_open[minor]) {
- printk ("DT3155: Already opened by another process.\n");
- return -EBUSY;
- }
+ if (dt3155_dev_open[minor]) {
+ printk("DT3155: Already opened by another process.\n");
+ return -EBUSY;
+ }
- if (dt3155_status[minor].device_installed==0)
- {
- printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
- minor);
- return -EIO;
+ if (dt3155_status[minor].device_installed == 0) {
+ printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
+ minor);
+ return -EIO;
}
- if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
- printk ("DT3155: Not in idle state (state = %x)\n",
- dt3155_status[minor].state);
- return -EBUSY;
- }
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
+ printk("DT3155: Not in idle state (state = %x)\n",
+ dt3155_status[minor].state);
+ return -EBUSY;
+ }
- printk("DT3155: Device opened.\n");
+ printk("DT3155: Device opened.\n");
- dt3155_dev_open[minor] = 1 ;
+ dt3155_dev_open[minor] = 1 ;
- dt3155_flush(minor);
+ dt3155_flush(minor);
- /* Disable ALL interrupts */
- int_csr_r.reg = 0;
- WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+ /* Disable ALL interrupts */
+ int_csr_r.reg = 0;
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
- init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
+ init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
- return 0;
+ return 0;
}
@@ -727,23 +688,18 @@ static int dt3155_open(struct inode* inode, struct file* filep)
*****************************************************/
static int dt3155_close(struct inode *inode, struct file *filep)
{
- int minor;
+ int minor;
- minor = MINOR(inode->i_rdev); /* which device are we closing */
- if (!dt3155_dev_open[minor])
- {
- printk("DT3155: attempt to CLOSE a not OPEN device\n");
- }
- else
- {
- dt3155_dev_open[minor] = 0;
+ minor = MINOR(inode->i_rdev); /* which device are we closing */
+ if (!dt3155_dev_open[minor]) {
+ printk("DT3155: attempt to CLOSE a not OPEN device\n");
+ } else {
+ dt3155_dev_open[minor] = 0;
- if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- {
- quick_stop(minor);
- }
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE)
+ quick_stop(minor);
}
- return 0;
+ return 0;
}
/*****************************************************
@@ -753,87 +709,82 @@ static int dt3155_close(struct inode *inode, struct file *filep)
static ssize_t dt3155_read(struct file *filep, char __user *buf,
size_t count, loff_t *ppos)
{
- /* which device are we reading from? */
- int minor = MINOR(filep->f_dentry->d_inode->i_rdev);
- u32 offset;
- int frame_index;
- struct frame_info *frame_info;
-
- /* TODO: this should check the error flag and */
- /* return an error on hardware failures */
- if (count != sizeof(struct dt3155_read))
- {
- printk("DT3155 ERROR (NJC): count is not right\n");
- return -EINVAL;
+ /* which device are we reading from? */
+ int minor = MINOR(filep->f_dentry->d_inode->i_rdev);
+ u32 offset;
+ int frame_index;
+ struct frame_info *frame_info;
+
+ /* TODO: this should check the error flag and */
+ /* return an error on hardware failures */
+ if (count != sizeof(struct dt3155_read)) {
+ printk("DT3155 ERROR (NJC): count is not right\n");
+ return -EINVAL;
}
- /* Hack here -- I'm going to allow reading even when idle.
- * this is so that the frames can be read after STOP has
- * been called. Leaving it here, commented out, as a reminder
- * for a short while to make sure there are no problems.
- * Note that if the driver is not opened in non_blocking mode,
- * and the device is idle, then it could sit here forever! */
+ /* Hack here -- I'm going to allow reading even when idle.
+ * this is so that the frames can be read after STOP has
+ * been called. Leaving it here, commented out, as a reminder
+ * for a short while to make sure there are no problems.
+ * Note that if the driver is not opened in non_blocking mode,
+ * and the device is idle, then it could sit here forever! */
- /* if (dt3155_status[minor].state == DT3155_STATE_IDLE)*/
- /* return -EBUSY;*/
+ /* if (dt3155_status[minor].state == DT3155_STATE_IDLE)*/
+ /* return -EBUSY;*/
- /* non-blocking reads should return if no data */
- if (filep->f_flags & O_NDELAY)
- {
- if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
- /*printk("dt3155: no buffers available (?)\n");*/
- /* printques(minor); */
- return -EAGAIN;
- }
- }
- else
- {
- /*
- * sleep till data arrives , or we get interrupted.
- * Note that wait_event_interruptible() does not actually
- * sleep/wait if it's condition evaluates to true upon entry.
- */
- wait_event_interruptible(dt3155_read_wait_queue[minor],
- (frame_index = dt3155_get_ready_buffer(minor))
- >= 0);
-
- if (frame_index < 0)
- {
- printk ("DT3155: read: interrupted\n");
- quick_stop (minor);
- printques(minor);
- return -EINTR;
+ /* non-blocking reads should return if no data */
+ if (filep->f_flags & O_NDELAY) {
+ if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
+ /*printk("dt3155: no buffers available (?)\n");*/
+ /* printques(minor); */
+ return -EAGAIN;
+ }
+ } else {
+ /*
+ * sleep till data arrives , or we get interrupted.
+ * Note that wait_event_interruptible() does not actually
+ * sleep/wait if it's condition evaluates to true upon entry.
+ */
+ wait_event_interruptible(dt3155_read_wait_queue[minor],
+ (frame_index = dt3155_get_ready_buffer(minor))
+ >= 0);
+
+ if (frame_index < 0) {
+ printk("DT3155: read: interrupted\n");
+ quick_stop(minor);
+ printques(minor);
+ return -EINTR;
}
}
- frame_info = &dt3155_status[minor].fbuffer.frame_info[frame_index];
+ frame_info = &dt3155_status[minor].fbuffer.frame_info[frame_index];
- /* make this an offset */
- offset = frame_info->addr - dt3155_status[minor].mem_addr;
+ /* make this an offset */
+ offset = frame_info->addr - dt3155_status[minor].mem_addr;
- put_user(offset, (unsigned int *) buf);
- buf += sizeof(u32);
- put_user(dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
- buf += sizeof(u32);
- put_user(dt3155_status[minor].state, (unsigned int *) buf);
- buf += sizeof(u32);
- if (copy_to_user(buf, frame_info, sizeof(*frame_info)))
- return -EFAULT;
+ put_user(offset, (unsigned int *) buf);
+ buf += sizeof(u32);
+ put_user(dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
+ buf += sizeof(u32);
+ put_user(dt3155_status[minor].state, (unsigned int *) buf);
+ buf += sizeof(u32);
+ if (copy_to_user(buf, frame_info, sizeof(*frame_info)))
+ return -EFAULT;
- return sizeof(struct dt3155_read);
+ return sizeof(struct dt3155_read);
}
-static unsigned int dt3155_poll (struct file * filp, poll_table *wait)
+static unsigned int dt3155_poll(struct file *filp, poll_table *wait)
{
- int minor = MINOR(filp->f_dentry->d_inode->i_rdev);
+ int minor = MINOR(filp->f_dentry->d_inode->i_rdev);
- if (!is_ready_buf_empty(minor))
- return POLLIN | POLLRDNORM;
+ if (!is_ready_buf_empty(minor))
+ return POLLIN | POLLRDNORM;
- poll_wait (filp, &dt3155_read_wait_queue[minor], wait);
+ poll_wait(filp, &dt3155_read_wait_queue[minor], wait);
- return 0;
+ return 0;
}
static long
@@ -868,72 +819,68 @@ static struct file_operations dt3155_fops = {
*
* PCI has been totally reworked in 2.1..
*****************************************************/
-static int find_PCI (void)
+static int find_PCI(void)
{
- struct pci_dev *pci_dev = NULL;
- int error, pci_index = 0;
- unsigned short rev_device;
- unsigned long base;
- unsigned char irq;
-
- while ((pci_dev = pci_get_device
- (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL)
- {
- pci_index ++;
-
- /* Is it really there? */
- if ((error =
- pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device)))
- continue;
-
- /* Found a board */
- DT_3155_DEBUG_MSG("DT3155: Device number %d \n", pci_index);
-
- /* Make sure the driver was compiled with enough buffers to handle
- this many boards */
- if (pci_index > MAXBOARDS) {
- printk("DT3155: ERROR - found %d devices, but driver only configured "
- "for %d devices\n"
- "DT3155: Please change MAXBOARDS in dt3155.h\n",
- pci_index, MAXBOARDS);
- goto err;
- }
+ struct pci_dev *pci_dev = NULL;
+ int error, pci_index = 0;
+ unsigned short rev_device;
+ unsigned long base;
+ unsigned char irq;
+
+ while ((pci_dev = pci_get_device
+ (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL) {
+ pci_index++;
+
+ /* Is it really there? */
+ if ((error =
+ pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device)))
+ continue;
+
+ /* Found a board */
+ DT_3155_DEBUG_MSG("DT3155: Device number %d\n", pci_index);
+
+ /* Make sure the driver was compiled with enough buffers to handle
+ this many boards */
+ if (pci_index > MAXBOARDS) {
+ printk("DT3155: ERROR - found %d devices, but driver "
+ "only configured for %d devices\n"
+ "DT3155: Please change MAXBOARDS in dt3155.h\n",
+ pci_index, MAXBOARDS);
+ goto err;
+ }
/* Now, just go out and make sure that this/these device(s) is/are
actually mapped into the kernel address space */
- if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
- (u32 *) &base)))
- {
- printk("DT3155: Was not able to find device \n");
- goto err;
+ if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
+ (u32 *) &base))) {
+ printk("DT3155: Was not able to find device\n");
+ goto err;
}
- DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx \n", base);
- dt3155_status[pci_index-1].reg_addr = base;
+ DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx\n", base);
+ dt3155_status[pci_index-1].reg_addr = base;
- /* Remap the base address to a logical address through which we
- * can access it. */
- dt3155_lbase[pci_index - 1] = ioremap(base,PCI_PAGE_SIZE);
- dt3155_status[pci_index - 1].reg_addr = base;
- DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
+ /* Remap the base address to a logical address through which we
+ * can access it. */
+ dt3155_lbase[pci_index - 1] = ioremap(base, PCI_PAGE_SIZE);
+ dt3155_status[pci_index - 1].reg_addr = base;
+ DT_3155_DEBUG_MSG("DT3155: New logical address is %p\n",
dt3155_lbase[pci_index-1]);
- if (!dt3155_lbase[pci_index-1])
- {
- printk("DT3155: Unable to remap control registers\n");
- goto err;
+ if (!dt3155_lbase[pci_index-1]) {
+ printk("DT3155: Unable to remap control registers\n");
+ goto err;
}
- if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq)))
- {
- printk("DT3155: Was not able to find device \n");
- goto err;
+ if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq))) {
+ printk("DT3155: Was not able to find device\n");
+ goto err;
}
- DT_3155_DEBUG_MSG("DT3155: IRQ is %d \n",irq);
- dt3155_status[pci_index-1].irq = irq;
- /* Set flag: kth device found! */
- dt3155_status[pci_index-1].device_installed = 1;
- printk("DT3155: Installing device %d w/irq %d and address %p\n",
+ DT_3155_DEBUG_MSG("DT3155: IRQ is %d\n", irq);
+ dt3155_status[pci_index-1].irq = irq;
+ /* Set flag: kth device found! */
+ dt3155_status[pci_index-1].device_installed = 1;
+ printk("DT3155: Installing device %d w/irq %d and address %p\n",
pci_index,
dt3155_status[pci_index-1].irq,
dt3155_lbase[pci_index-1]);
@@ -955,78 +902,73 @@ u32 allocatorAddr = 0;
*****************************************************/
int init_module(void)
{
- int index;
- int rcode = 0;
- char *devname[MAXBOARDS];
+ int index;
+ int rcode = 0;
+ char *devname[MAXBOARDS];
- devname[0] = "dt3155a";
+ devname[0] = "dt3155a";
#if MAXBOARDS == 2
- devname[1] = "dt3155b";
+ devname[1] = "dt3155b";
#endif
- printk("DT3155: Loading module...\n");
+ printk("DT3155: Loading module...\n");
- /* Register the device driver */
- rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
- if(rcode < 0)
- {
- printk(KERN_INFO "DT3155: register_chrdev failed \n");
- return rcode;
+ /* Register the device driver */
+ rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
+ if (rcode < 0) {
+ printk(KERN_INFO "DT3155: register_chrdev failed\n");
+ return rcode;
}
- if(dt3155_major == 0)
- dt3155_major = rcode; /* dynamic */
-
-
- /* init the status variables. */
- /* DMA memory is taken care of in setup_buffers() */
- for (index = 0; index < MAXBOARDS; index++)
- {
- dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
- dt3155_status[index].config.continuous = DT3155_ACQ;
- dt3155_status[index].config.cols = DT3155_MAX_COLS;
- dt3155_status[index].config.rows = DT3155_MAX_ROWS;
- dt3155_status[index].state = DT3155_STATE_IDLE;
-
- /* find_PCI() will check if devices are installed; */
- /* first assume they're not: */
- dt3155_status[index].mem_addr = 0;
- dt3155_status[index].mem_size = 0;
- dt3155_status[index].state = DT3155_STATE_IDLE;
- dt3155_status[index].device_installed = 0;
+ if (dt3155_major == 0)
+ dt3155_major = rcode; /* dynamic */
+
+
+ /* init the status variables. */
+ /* DMA memory is taken care of in setup_buffers() */
+ for (index = 0; index < MAXBOARDS; index++) {
+ dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
+ dt3155_status[index].config.continuous = DT3155_ACQ;
+ dt3155_status[index].config.cols = DT3155_MAX_COLS;
+ dt3155_status[index].config.rows = DT3155_MAX_ROWS;
+ dt3155_status[index].state = DT3155_STATE_IDLE;
+
+ /* find_PCI() will check if devices are installed; */
+ /* first assume they're not: */
+ dt3155_status[index].mem_addr = 0;
+ dt3155_status[index].mem_size = 0;
+ dt3155_status[index].state = DT3155_STATE_IDLE;
+ dt3155_status[index].device_installed = 0;
}
- /* Now let's find the hardware. find_PCI() will set ndevices to the
- * number of cards found in this machine. */
+ /* Now let's find the hardware. find_PCI() will set ndevices to the
+ * number of cards found in this machine. */
{
- if ((rcode = find_PCI()) != DT_3155_SUCCESS)
- {
- printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
- unregister_chrdev(dt3155_major, "dt3155");
- return rcode;
- }
+ if ((rcode = find_PCI()) != DT_3155_SUCCESS) {
+ printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
+ unregister_chrdev(dt3155_major, "dt3155");
+ return rcode;
+ }
}
- /* Ok, time to setup the frame buffers */
- if((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0)
- {
- printk("DT3155: Error: setting up buffer not large enough.");
- unregister_chrdev(dt3155_major, "dt3155");
- return rcode;
+ /* Ok, time to setup the frame buffers */
+ if ((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0) {
+ printk("DT3155: Error: setting up buffer not large enough.");
+ unregister_chrdev(dt3155_major, "dt3155");
+ return rcode;
}
/* If we are this far, then there is enough RAM */
/* for the buffers: Print the configuration. */
- for( index = 0; index < ndevices; index++)
- {
- printk("DT3155: Device = %d; acq_mode = %d; "
+ for (index = 0; index < ndevices; index++) {
+ printk("DT3155: Device = %d; acq_mode = %d; "
"continuous = %d; cols = %d; rows = %d;\n",
- index ,
+ index,
dt3155_status[index].config.acq_mode,
dt3155_status[index].config.continuous,
dt3155_status[index].config.cols,
dt3155_status[index].config.rows);
- printk("DT3155: m_addr = 0x%x; m_size = %ld; "
+ printk("DT3155: m_addr = 0x%x; m_size = %ld; "
"state = %d; device_installed = %d\n",
dt3155_status[index].mem_addr,
(long int)dt3155_status[index].mem_size,
@@ -1034,30 +976,27 @@ int init_module(void)
dt3155_status[index].device_installed);
}
- /* Disable ALL interrupts */
- int_csr_r.reg = 0;
- for( index = 0; index < ndevices; index++)
- {
- WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
- if(dt3155_status[index].device_installed)
- {
- /*
- * This driver *looks* like it can handle sharing interrupts,
- * but I can't actually test myself. I've had reports that it
- * DOES work so I'll enable it for now. This comment will remain
- * as a reminder in case any problems arise. (SS)
- */
- /* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
- rcode = request_irq(dt3155_status[index].irq, (void *)dt3155_isr,
- IRQF_SHARED | IRQF_DISABLED, devname[index],
- (void*) &dt3155_status[index]);
- if(rcode < 0)
- {
- printk("DT3155: minor %d request_irq failed for IRQ %d\n",
- index, dt3155_status[index].irq);
- unregister_chrdev(dt3155_major, "dt3155");
- return rcode;
- }
+ /* Disable ALL interrupts */
+ int_csr_r.reg = 0;
+ for (index = 0; index < ndevices; index++) {
+ WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
+ if (dt3155_status[index].device_installed) {
+ /*
+ * This driver *looks* like it can handle sharing interrupts,
+ * but I can't actually test myself. I've had reports that it
+ * DOES work so I'll enable it for now. This comment will remain
+ * as a reminder in case any problems arise. (SS)
+ */
+ /* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
+ rcode = request_irq(dt3155_status[index].irq,
+ (void *)dt3155_isr, IRQF_SHARED | IRQF_DISABLED, devname[index],
+ (void *) &dt3155_status[index]);
+ if (rcode < 0) {
+ printk("DT3155: minor %d request_irq failed for"
+ "IRQ %d\n", index, dt3155_status[index].irq);
+ unregister_chrdev(dt3155_major, "dt3155");
+ return rcode;
+ }
}
}
@@ -1072,27 +1011,26 @@ int init_module(void)
*****************************************************/
void cleanup_module(void)
{
- int index;
+ int index;
- printk("DT3155: cleanup_module called\n");
+ printk("DT3155: cleanup_module called\n");
/* removed DMA allocated with the allocator */
#ifdef STANDALONE_ALLOCATOR
- if (allocatorAddr != 0)
- allocator_free_dma(allocatorAddr);
+ if (allocatorAddr != 0)
+ allocator_free_dma(allocatorAddr);
#else
- allocator_cleanup();
+ allocator_cleanup();
#endif
- unregister_chrdev(dt3155_major, "dt3155");
+ unregister_chrdev(dt3155_major, "dt3155");
- for(index = 0; index < ndevices; index++)
- {
- if(dt3155_status[index].device_installed == 1)
- {
- printk("DT3155: Freeing irq %d for device %d\n",
- dt3155_status[index].irq, index);
- free_irq(dt3155_status[index].irq, (void*)&dt3155_status[index]);
+ for (index = 0; index < ndevices; index++) {
+ if (dt3155_status[index].device_installed == 1) {
+ printk("DT3155: Freeing irq %d for device %d\n",
+ dt3155_status[index].irq, index);
+ free_irq(dt3155_status[index].irq,
+ (void *)&dt3155_status[index]);
}
}
}
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists