Linux version 2.6.35-rc4-git5 (valette@pink-floyd2) (gcc version 4.4.4 (Debian 4.4.4-7) ) #144 SMP PREEMPT Thu Jul 15 16:41:12 CEST 2010 Command line: BOOT_IMAGE=linux ro root=812 video=intelfb BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000098000 (usable) BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bbab1000 (usable) BIOS-e820: 00000000bbab1000 - 00000000bbab7000 (reserved) BIOS-e820: 00000000bbab7000 - 00000000bbbc2000 (usable) BIOS-e820: 00000000bbbc2000 - 00000000bbc0f000 (reserved) BIOS-e820: 00000000bbc0f000 - 00000000bbd08000 (usable) BIOS-e820: 00000000bbd08000 - 00000000bbf0f000 (reserved) BIOS-e820: 00000000bbf0f000 - 00000000bbf18000 (usable) BIOS-e820: 00000000bbf18000 - 00000000bbf1f000 (reserved) BIOS-e820: 00000000bbf1f000 - 00000000bbf54000 (usable) BIOS-e820: 00000000bbf54000 - 00000000bbf9f000 (ACPI NVS) BIOS-e820: 00000000bbf9f000 - 00000000bbfe3000 (usable) BIOS-e820: 00000000bbfe3000 - 00000000bbffd000 (ACPI data) BIOS-e820: 00000000bbffd000 - 00000000bc000000 (usable) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 0BE000000 mask FFE000000 uncachable 2 base 000000000 mask F00000000 write-back 3 base 100000000 mask FC0000000 write-back 4 base 0BDE00000 mask FFFE00000 uncachable 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 2M kernel direct mapping tables up to bc000000 @ 8000-c000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ a000-10000 ACPI: RSDP 00000000000f7560 00024 (v02 PTLTD ) ACPI: XSDT 00000000bbff4b0e 00074 (v01 FSC PC 06040000 LTP 00000000) ACPI: FACP 00000000bbfe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 00000000bbfe8000 07FF8 (v02 FIC XY680 06040000 INTL 20050624) ACPI: FACS 00000000bbf9efc0 00040 ACPI: HPET 00000000bbffcd86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 00000000bbffcdbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: SLIC 00000000bbffcdfa 00176 (v01 FSC PC 06040000 LOHR 0000005A) ACPI: APIC 00000000bbffcf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000bbffcfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SSDT 00000000bbff4baa 0007C (v01 BrtRef DD01BRT 00001000 INTL 20050624) ACPI: SSDT 00000000bbfe6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT 00000000bbfe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 00000000bbfe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002200000-ffff8800059fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[9] active PFN ranges 0: 0x00000001 -> 0x00000098 0: 0x00000100 -> 0x000bbab1 0: 0x000bbab7 -> 0x000bbbc2 0: 0x000bbc0f -> 0x000bbd08 0: 0x000bbf0f -> 0x000bbf18 0: 0x000bbf1f -> 0x000bbf54 0: 0x000bbf9f -> 0x000bbfe3 0: 0x000bbffd -> 0x000bc000 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1031377 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3935 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 750962 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [7000 - 77ff] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000 PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000 PM: Registered nosave memory: 00000000000d8000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000bbab1000 - 00000000bbab7000 PM: Registered nosave memory: 00000000bbbc2000 - 00000000bbc0f000 PM: Registered nosave memory: 00000000bbd08000 - 00000000bbf0f000 PM: Registered nosave memory: 00000000bbf18000 - 00000000bbf1f000 PM: Registered nosave memory: 00000000bbf54000 - 00000000bbf9f000 PM: Registered nosave memory: 00000000bbfe3000 - 00000000bbffd000 PM: Registered nosave memory: 00000000bc000000 - 0000000100000000 Allocating PCI resources starting at bc000000 (gap: bc000000:44000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s77504 r8192 d20800 u1048576 early_res array is doubled to 128 at [b000 - bfff] pcpu-alloc: s77504 r8192 d20800 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013457 Kernel command line: BOOT_IMAGE=linux ro root=812 video=intelfb PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Subtract (64 early reservations) #1 [0001000000 - 00019197b4] TEXT DATA BSS #2 [0000098000 - 0000100000] BIOS reserved #3 [000191a000 - 000191a168] BRK #4 [0000001000 - 0000003000] TRAMPOLINE #5 [0000003000 - 0000007000] ACPI WAKEUP #6 [0000008000 - 000000a000] PGTABLE #7 [000000a000 - 000000b000] PGTABLE #8 [000191a180 - 000191b180] BOOTMEM #9 [00019197c0 - 0001919ac0] BOOTMEM #10 [000211c000 - 000211d000] BOOTMEM #11 [000211d000 - 000211e000] BOOTMEM #12 [0002200000 - 0005a00000] MEMMAP 0 #13 [0001919ac0 - 0001919c40] BOOTMEM #14 [000191b180 - 0001933180] BOOTMEM #15 [0001933180 - 0001939180] BOOTMEM #16 [000193a000 - 000193b000] BOOTMEM #17 [0001919c40 - 0001919c81] BOOTMEM #18 [0001919cc0 - 0001919d03] BOOTMEM #19 [0001939180 - 00019395a8] BOOTMEM #20 [0001919d40 - 0001919da8] BOOTMEM #21 [0001919dc0 - 0001919e28] BOOTMEM #22 [0001919e40 - 0001919ea8] BOOTMEM #23 [0001919ec0 - 0001919f28] BOOTMEM #24 [0001919f40 - 0001919fa8] BOOTMEM #25 [00019395c0 - 0001939628] BOOTMEM #26 [0001939640 - 00019396a8] BOOTMEM #27 [00019396c0 - 0001939728] BOOTMEM #28 [0001939740 - 00019397a8] BOOTMEM #29 [00019397c0 - 0001939828] BOOTMEM #30 [0001939840 - 00019398a8] BOOTMEM #31 [00019398c0 - 0001939928] BOOTMEM #32 [0001939940 - 00019399a8] BOOTMEM #33 [00019399c0 - 0001939a28] BOOTMEM #34 [0001939a40 - 0001939aa8] BOOTMEM #35 [0001939ac0 - 0001939b28] BOOTMEM #36 [0001939b40 - 0001939ba8] BOOTMEM #37 [0001939bc0 - 0001939c28] BOOTMEM #38 [0001919fc0 - 0001919fe0] BOOTMEM #39 [0001939c40 - 0001939c60] BOOTMEM #40 [0001939c80 - 0001939ca0] BOOTMEM #41 [0001939cc0 - 0001939ce0] BOOTMEM #42 [0001939d00 - 0001939d20] BOOTMEM #43 [0001939d40 - 0001939d60] BOOTMEM #44 [0001939d80 - 0001939da0] BOOTMEM #45 [0001939dc0 - 0001939de0] BOOTMEM #46 [0001939e00 - 0001939e2b] BOOTMEM #47 [0001939e40 - 0001939e6b] BOOTMEM #48 [0001a00000 - 0001a1a000] BOOTMEM #49 [0001b00000 - 0001b1a000] BOOTMEM #50 [0001939e80 - 0001939e88] BOOTMEM #51 [0001939ec0 - 0001939ec8] BOOTMEM #52 [0001939f00 - 0001939f08] BOOTMEM #53 [0001939f40 - 0001939f50] BOOTMEM #54 [000193d000 - 000193d140] BOOTMEM #55 [0001939f80 - 0001939fe0] BOOTMEM #56 [000193d140 - 000193d1a0] BOOTMEM #57 [000193d1c0 - 00019451c0] BOOTMEM #58 [0001b1a000 - 0001f1a000] BOOTMEM #59 [0001f1a000 - 000211a000] BOOTMEM #60 [0005a00000 - 0009a00000] BOOTMEM #61 [00019451c0 - 00019651c0] BOOTMEM #62 [00019651c0 - 00019a51c0] BOOTMEM #63 [000000c000 - 0000014000] BOOTMEM Memory: 3986328k/5242880k available (5359k kernel code, 1117372k absent, 139180k reserved, 2931k data, 484k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:320 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2527.437 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.87 BogoMIPS (lpj=2527437) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 Booting Node 0, Processors #1 Ok. CPU1: Thermal monitoring handled by SMI Brought up 2 CPUs Total of 2 processors activated (10108.60 BogoMIPS). Time: 16:50:44 Date: 07/15/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000bbf1ac20 0028A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0028A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000bbf18620 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: SSDT 00000000bbf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 00000000bbf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] DMAR: Forcing write-buffer flush capability DMAR: Disabling IOMMU for graphics on this chipset pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xf3000000-0xf33fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] pci 0000:00:19.0: reg 10: [mem 0xf3800000-0xf381ffff] pci 0000:00:19.0: reg 14: [mem 0xf3824000-0xf3824fff] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1840-0x185f] pci 0000:00:1a.1: reg 20: [io 0x1860-0x187f] pci 0000:00:1a.2: reg 20: [io 0x1880-0x189f] pci 0000:00:1a.7: reg 10: [mem 0xf3825800-0xf3825bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf3820000-0xf3823fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff] pci 0000:00:1d.7: reg 10: [mem 0xf3825c00-0xf3825fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] pci 0000:00:1f.2: reg 20: [io 0x1c00-0x1c1f] pci 0000:00:1f.2: reg 24: [mem 0xf3825000-0xf38257ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref] pci 0000:04:00.0: reg 10: [mem 0xf3400000-0xf3401fff 64bit] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 04-04] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:04.0: reg 10: [mem 0xf3500000-0xf3500fff] pci 0000:05:04.0: supports D1 D2 pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:04.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xf3500000-0xf35fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: WMI: Mapper loaded Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 0000000000098000 - 000000000009ffff reserve RAM buffer: 00000000bbab1000 - 00000000bbffffff reserve RAM buffer: 00000000bbbc2000 - 00000000bbffffff reserve RAM buffer: 00000000bbd08000 - 00000000bbffffff reserve RAM buffer: 00000000bbf18000 - 00000000bbffffff reserve RAM buffer: 00000000bbf54000 - 00000000bbffffff reserve RAM buffer: 00000000bbfe3000 - 00000000bbffffff cfg80211: Calling CRDA to update world regulatory domain NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0480-0x048f] has been reserved system 00:05: [io 0x0900-0x0903] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x1000-0x107f] has been reserved system 00:05: [io 0x1180-0x11ff] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:05: [io 0xfe00] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved pci 0000:00:1c.1: BAR 9: assigned [mem 0xf3600000-0xf37fffff 64bit pref] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff] pci 0000:00:1f.3: BAR 0: assigned [mem 0xf3826000-0xf38260ff 64bit] pci 0000:00:1f.3: BAR 0: set to [mem 0xf3826000-0xf38260ff 64bit] (PCI address [0xf3826000-0xf38260ff] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 04-04] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf37fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05-05] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xf3500000-0xf35fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff] pci_bus 0000:02: resource 2 [mem 0xf6000000-0xf7ffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] pci_bus 0000:04: resource 1 [mem 0xf3400000-0xf34fffff] pci_bus 0000:04: resource 2 [mem 0xf3600000-0xf37fffff 64bit pref] pci_bus 0000:05: resource 1 [mem 0xf3500000-0xf35fffff] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000e3fff] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b pci 0000:00:1a.0: Performing full reset pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1a.1: Performing full reset pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1a.2: Performing full reset pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.2: Performing full reset PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000 software IO TLB at phys 0x5a00000 - 0x9a00000 Simple Boot Flag at 0x36 set to 0x1 microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c microcode: Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages Slow work thread pool: Starting up Slow work thread pool: Ready fuse init (API version 7.14) msgmni has been set to 7785 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X ACPI: AC Adapter [ACAD] (off-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (57 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel GM45 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory ACPI: Battery Slot [BAT0] (battery present) agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] set up 31M of stolen space Console: switching to colour frame buffer device 240x67 fb0: inteldrmfb frame buffer device drm: registered panic notifier [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function acpi device:02: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4 ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) acpi device:05: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 VGA switcheroo: detected DSM switching method \_SB_.PCI0.GFX0 handle nouveau 0000:01:00.0: enabling device (0004 -> 0007) nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096480a1) vga_switcheroo: enabled [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 62.94.66.00 [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02032342 00020010 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [drm] nouveau 0000:01:00.0: Adaptor not initialised [drm] nouveau 0000:01:00.0: Running VBIOS init tables [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD463 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD8E0 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE8A9 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE9CA [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC47 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xECAC [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [drm] nouveau 0000:01:00.0: 0xC108: parsing output script 0 [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [TTM] Zone kernel: Available graphics memory: 1993164 kiB. [TTM] Initializing pool allocator. [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Detected a LVDS output [drm] nouveau 0000:01:00.0: Detected a DAC output [drm] nouveau 0000:01:00.0: Detected a TMDS output [drm] nouveau 0000:01:00.0: Detected a LVDS connector [drm] nouveau 0000:01:00.0: LVDS present in DCB table, but couldn't determine its native mode. Disabling. [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a HDMI connector No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x40250000, bo ffff88013e39c400 fb1: nouveaufb frame buffer device [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 44 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf3825000 port 0xf3825100 irq 44 ata2: SATA max UDMA/133 abar m2048@0xf3825000 port 0xf3825180 irq 44 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf3825000 port 0xf3825300 irq 44 ata6: SATA max UDMA/133 abar m2048@0xf3825000 port 0xf3825380 irq 44 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 45 for MSI/MSI-X e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:14:0b:4f:78:46 e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 46 for MSI/MSI-X usbcore: registered new interface driver ar9170usb console [netcon0] enabled netconsole: network logging started firewire_ohci 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 firewire_ohci: Added fw-ohci device 0000:05:04.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file 'devices' /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: supports USB remote wakeup ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf3825800 ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35-rc4-git5 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3825c00 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35-rc4-git5 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: detected 2 ports uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.0: Performing full reset uhci_hcd 0000:00:1a.0: supports USB remote wakeup uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 usb usb3: default language 0x0409 usb usb3: udev 1, busnum 3, minor = 256 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35-rc4-git5 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA uhci_hcd 0000:00:1a.1: detected 2 ports uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.1: Performing full reset uhci_hcd 0000:00:1a.1: supports USB remote wakeup ata1.00: configured for UDMA/100 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 usb usb4: default language 0x0409 usb usb4: udev 1, busnum 4, minor = 384 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.35-rc4-git5 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: detected 2 ports uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.2: Performing full reset uhci_hcd 0000:00:1a.2: supports USB remote wakeup uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880 usb usb5: default language 0x0409 usb usb5: udev 1, busnum 5, minor = 512 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35-rc4-git5 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '006' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: detected 2 ports scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 23, io base 0x000018a0 usb usb6: default language 0x0409 usb usb6: udev 1, busnum 6, minor = 640 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.35-rc4-git5 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3: status 0501 change 0001 ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 4: status 0501 change 0001 usb usb6: usb_probe_device usb usb6: configuration #1 chosen from 1 choice usb usb6: adding 6-0:1.0 (config #1, interface 0) hub 6-0:1.0: usb_probe_interface hub 6-0:1.0: usb_probe_interface - got id hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected hub 6-0:1.0: standalone hub hub 6-0:1.0: no power switching (usb 1.0) hub 6-0:1.0: individual port over-current protection hub 6-0:1.0: power on to power good time: 2ms hub 6-0:1.0: local power source is good hub 6-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '007' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018c0 usb usb7: default language 0x0409 usb usb7: udev 1, busnum 7, minor = 768 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.35-rc4-git5 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: usb_probe_device usb usb7: configuration #1 chosen from 1 choice usb usb7: adding 7-0:1.0 (config #1, interface 0) sda: hub 7-0:1.0: usb_probe_interface hub 7-0:1.0: usb_probe_interface - got id hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected hub 7-0:1.0: standalone hub hub 7-0:1.0: no power switching (usb 1.0) hub 7-0:1.0: individual port over-current protection hub 7-0:1.0: power on to power good time: 2ms hub 7-0:1.0: local power source is good hub 7-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '008' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb8: default language 0x0409 usb usb8: udev 1, busnum 8, minor = 896 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 usb usb8: Manufacturer: Linux 2.6.35-rc4-git5 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: usb_probe_device usb usb8: configuration #1 chosen from 1 choice usb usb8: adding 8-0:1.0 (config #1, interface 0) hub 8-0:1.0: usb_probe_interface hub 8-0:1.0: usb_probe_interface - got id hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected hub 8-0:1.0: standalone hub hub 8-0:1.0: no power switching (usb 1.0) hub 8-0:1.0: individual port over-current protection hub 8-0:1.0: power on to power good time: 2ms hub 8-0:1.0: local power source is good hub 8-0:1.0: trying to enable port power on non-switchable hub /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: resource 0000:00:1f.3 [io 0x1c20-0x1c3f] conflicts with ACPI region SMBI [io 0x1c20-0x1c2f disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized Linux video capture interface: v2.00 sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49 usbcore: registered new interface driver sn9c102 gspca: main v2.9.0 registered uhci_hcd 0000:00:1a.2: port 1 portsc 0082,00 usbcore: registered new interface driver spca508 spca508: registered usbcore: registered new interface driver spca561 spca561: registered usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) md: raid0 personality registered for level 0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu No iBFT detected. hub 1-0:1.0: state 7 ports 6 chg 0018 evt 0000 hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver fujitsu-laptop: driver 0.6.0 successfully loaded. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC888: SKU not ready 0x598301f0 hda_codec: ALC888: BIOS auto-probing. ALSA device list: #0: HDA Intel at 0xf3820000 irq 47 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' PM: Resume from disk failed. Magic number: 2:617:843 ehci_hcd 0000:00:1a.7: port 3 high speed ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT usb 1-3: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:1a.7: port 3 high speed ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT usb 1-3: default language 0x0409 usb 1-3: udev 2, busnum 1, minor = 1 usb 1-3: New USB device found, idVendor=0bda, idProduct=0167 firewire_core: created device fw0: GUID 0040ca01470026ef, S400 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: USB2.0-CRW usb 1-3: Manufacturer: Generic usb 1-3: SerialNumber: 20070818000000000 usb 1-3: usb_probe_device usb 1-3: configuration #1 chosen from 1 choice usb 1-3: adding 1-3:1.0 (config #1, interface 0) usb-storage 1-3:1.0: usb_probe_interface usb-storage 1-3:1.0: usb_probe_interface - got id scsi6 : usb-storage 1-3:1.0 /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '002' hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1a.7: port 4 full speed --> companion ehci_hcd 0000:00:1a.7: GetStatus port 4 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 4 not reset yet, waiting 50ms ehci_hcd 0000:00:1a.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb 4-2: new full speed USB device using uhci_hcd and address 2 ata2.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100 ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 usb 4-2: ep0 maxpacket = 16 sdb6 usb 4-2: uhci_result_common: failed with status 440000 sdb7 sdb8 sdb9 sda1 sda2 < sdb10 > sd 1:0:0:0: [sdb] Attached SCSI disk sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk usb usb3: suspend_rh (auto-stop) usb usb6: suspend_rh (auto-stop) usb 4-2: uhci_result_common: failed with status 440000 usb 4-2: uhci_result_common: failed with status 440000 usb 4-2: default language 0x0409 usb 4-2: udev 2, busnum 4, minor = 385 usb 4-2: New USB device found, idVendor=1934, idProduct=0702 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-2: Product: eHome Infrared Transceiver usb 4-2: Manufacturer: FINTEK usb 4-2: SerialNumber: 88636562727801 usb 4-2: usb_probe_device usb 4-2: configuration #1 chosen from 1 choice usb 4-2: adding 4-2:1.0 (config #1, interface 0) /usr/src/linux-2.6.29.1/drivers/usb/core/inode.c: creating file '002' hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 usb usb7: suspend_rh (auto-stop) usb usb5: suspend_rh (auto-stop) usb usb8: suspend_rh (auto-stop) scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdc] Attached SCSI removable disk ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATAPI: HL-DT-ST BDDVDRW CT10N, WK03, max UDMA/133 ata5.00: configured for UDMA/133 scsi 4:0:0:0: CD-ROM HL-DT-ST BDDVDRW CT10N WK03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg3 type 5 ata6: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb2): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:18. Freeing unused kernel memory: 484k freed hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh hub 6-0:1.0: hub_suspend usb usb6: bus auto-suspend usb usb6: suspend_rh hub 7-0:1.0: hub_suspend usb usb7: bus auto-suspend usb usb7: suspend_rh hub 8-0:1.0: hub_suspend usb usb8: bus auto-suspend usb usb8: suspend_rh hub 5-0:1.0: hub_suspend usb usb5: bus auto-suspend usb usb5: suspend_rh iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 phy0: Selected rate control algorithm 'iwl-agn-rs' Adding 1951860k swap on /dev/sdb1. Priority:-1 extents:1 across:1951860k EXT3-fs (sdb2): using internal journal EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb9): using internal journal EXT3-fs (sdb9): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb5): using internal journal EXT3-fs (sdb5): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb6): using internal journal EXT3-fs (sdb6): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb7): using internal journal EXT3-fs (sdb7): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb8): using internal journal EXT3-fs (sdb8): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb10): using internal journal EXT3-fs (sdb10): mounted filesystem with writeback data mode e1000e 0000:00:19.0: irq 45 for MSI/MSI-X e1000e 0000:00:19.0: irq 45 for MSI/MSI-X wlan0: authenticate with 00:1d:6a:57:d3:5e (try 1) wlan0: authenticated wlan0: associate with 00:1d:6a:57:d3:5e (try 1) wlan0: RX AssocResp from 00:1d:6a:57:d3:5e (capab=0x431 status=0 aid=1) wlan0: associated cfg80211: Calling CRDA for country: FR vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem iwlagn 0000:04:00.0: Fail finding valid aggregation tid: 0 CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold ata1.00: configured for UDMA/100 ata1: EH complete ata2.00: configured for UDMA/100 ata2: EH complete iwlagn 0000:04:00.0: Fail finding valid aggregation tid: 0 iwlagn 0000:04:00.0: Fail finding valid aggregation tid: 0 iwlagn 0000:04:00.0: Fail finding valid aggregation tid: 0 iwlagn 0000:04:00.0: Fail finding valid aggregation tid: 0 iwlagn 0000:04:00.0: iwlagn_tx_agg_start on ra = 00:1d:6a:57:d3:5e tid = 0