| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100719154321.11535.39055.stgit@localhost6.localdomain6>
Date: Mon, 19 Jul 2010 09:45:34 -0600
From: Alex Williamson <alex.williamson@...hat.com>
To: linux-pci@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, alex.williamson@...hat.com,
chrisw@...hat.com, ddutile@...hat.com, bjorn.helgaas@...com,
eike-kernel@...tec.de
Subject: [PATCH v2] pci: Allow read/write access to sysfs I/O port resources
PCI sysfs resource files currently only allow mmap'ing. On x86 this
works fine for memory backed BARs, but doesn't work at all for I/O
port backed BARs. Add read/write to I/O port PCI sysfs resource
files to allow userspace access to these device regions.
Signed-off-by: Alex Williamson <alex.williamson@...hat.com>
---
v2: hopefully better commit log, remove unneeded cast, use bool
Documentation/filesystems/sysfs-pci.txt | 7 ++-
drivers/pci/pci-sysfs.c | 68 +++++++++++++++++++++++++++++++
2 files changed, 73 insertions(+), 2 deletions(-)
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 85354b3..74eaac2 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -39,7 +39,7 @@ files, each with their own function.
local_cpus nearby CPU mask (cpumask, ro)
remove remove device from kernel's list (ascii, wo)
resource PCI resource host addresses (ascii, ro)
- resource0..N PCI resource N, if present (binary, mmap)
+ resource0..N PCI resource N, if present (binary, mmap, rw[1])
resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
@@ -54,13 +54,16 @@ files, each with their own function.
binary - file contains binary data
cpumask - file contains a cpumask type
+[1] rw for RESOURCE_IO (I/O port) regions only
+
The read only files are informational, writes to them will be ignored, with
the exception of the 'rom' file. Writable files can be used to perform
actions on the device (e.g. changing config space, detaching a device).
mmapable files are available via an mmap of the file at offset 0 and can be
used to do actual device programming from userspace. Note that some platforms
don't support mmapping of certain resources, so be sure to check the return
-value from any attempted mmap.
+value from any attempted mmap. The most notable of these are I/O port
+resources, which also provide read/write access.
The 'enable' file provides a counter that indicates how many times the device
has been enabled. If the 'enable' file currently returns '4', and a '1' is
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 5935b85..f7692dc 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -778,6 +778,70 @@ pci_mmap_resource_wc(struct file *filp, struct kobject *kobj,
return pci_mmap_resource(kobj, attr, vma, 1);
}
+static ssize_t
+pci_resource_io(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count, bool write)
+{
+ struct pci_dev *pdev = to_pci_dev(container_of(kobj,
+ struct device, kobj));
+ struct resource *res = attr->private;
+ unsigned long port = off;
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if (res == &pdev->resource[i])
+ break;
+ if (i >= PCI_ROM_RESOURCE)
+ return -ENODEV;
+
+ port += pci_resource_start(pdev, i);
+
+ if (port > pci_resource_end(pdev, i))
+ return 0;
+
+ if (port + count - 1 > pci_resource_end(pdev, i))
+ return -EINVAL;
+
+ switch (count) {
+ case 1:
+ if (write)
+ outb(*(u8 *)buf, port);
+ else
+ *(u8 *)buf = inb(port);
+ return 1;
+ case 2:
+ if (write)
+ outw(*(u16 *)buf, port);
+ else
+ *(u16 *)buf = inw(port);
+ return 2;
+ case 4:
+ if (write)
+ outl(*(u32 *)buf, port);
+ else
+ *(u32 *)buf = inl(port);
+ return 4;
+ }
+ return -EINVAL;
+}
+
+static ssize_t
+pci_read_resource_io(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
+{
+ return pci_resource_io(filp, kobj, attr, buf, off, count, false);
+}
+
+static ssize_t
+pci_write_resource_io(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
+{
+ return pci_resource_io(filp, kobj, attr, buf, off, count, true);
+}
+
/**
* pci_remove_resource_files - cleanup resource files
* @pdev: dev to cleanup
@@ -828,6 +892,10 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
sprintf(res_attr_name, "resource%d", num);
res_attr->mmap = pci_mmap_resource_uc;
}
+ if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
+ res_attr->read = pci_read_resource_io;
+ res_attr->write = pci_write_resource_io;
+ }
res_attr->attr.name = res_attr_name;
res_attr->attr.mode = S_IRUSR | S_IWUSR;
res_attr->size = pci_resource_len(pdev, num);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists