Linux version 2.6.32.16-default (root@454pc) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #9 SMP Fri Jul 23 14:37:59 MEST 2010 Command line: root=/dev/md1 idebus=66 udev KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff40000 (usable) BIOS-e820: 00000000cff40000 - 00000000cff4e000 (ACPI data) BIOS-e820: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS) BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI 2.4 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x230000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0D0000000 mask FF0000000 uncachable 1 base 0E0000000 mask FE0000000 uncachable 2 base 000000000 mask E00000000 write-back 3 base 200000000 mask FE0000000 write-back 4 base 220000000 mask FF0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcff40 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cff40000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cff40000 page 4k kernel direct mapping tables up to cff40000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ 14000-1e000 ACPI: RSDP 00000000000fb140 00024 (v02 ACPIAM) ACPI: XSDT 00000000cff40100 0004C (v01 A_M_I_ OEMXSDT 02000822 MSFT 00000097) ACPI: FACP 00000000cff40290 000F4 (v03 A_M_I_ OEMFACP 02000822 MSFT 00000097) ACPI: DSDT 00000000cff405d0 08586 (v01 A0754 A0754001 00000001 INTL 20060113) ACPI: FACS 00000000cff4e000 00040 ACPI: APIC 00000000cff40390 00078 (v01 A_M_I_ OEMAPIC 02000822 MSFT 00000097) ACPI: MCFG 00000000cff40410 0003C (v01 A_M_I_ OEMMCFG 02000822 MSFT 00000097) ACPI: OEMB 00000000cff4e040 00081 (v01 A_M_I_ AMI_OEM 02000822 MSFT 00000097) ACPI: HPET 00000000cff48b60 00038 (v01 A_M_I_ OEMHPET 02000822 MSFT 00000097) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00018bade0] TEXT DATA BSS ==> [0001000000 - 00018bade0] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #4 [00018bb000 - 00018bb28c] BRK ==> [00018bb000 - 00018bb28c] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000cff40 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2096846 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3817 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833400 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 255, address 0xfec10000, GSI 24-279 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 280 Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 24 pages/cpu @ffff880028200000 s68632 r8192 d21480 u524288 pcpu-alloc: s68632 r8192 d21480 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065377 Kernel command line: root=/dev/md1 idebus=66 udev PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 8181896k/9175040k available (4745k kernel code, 787656k absent, 204604k reserved, 3092k data, 484k init) Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2504.732 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5009.46 BogoMIPS (lpj=10018928) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Freeing SMP alternatives: 40k freed ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM2) CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (20037.11 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 9308.000 MB/sec xor: using function: generic_sse (9308.000 MB/sec) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.12.1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI Warning: Incorrect checksum in table [OEMB] - 82, should be 81 (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfffc00-0xfbffffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbfff800-0xfbfffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07] pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883] pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807] pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa41f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbffe800-0xfbffefff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbfff400-0xfbfff4ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfe7fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] pci 0000:04:00.0: supports D1 pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: reg 10 64bit mmio: [0xfeaffc00-0xfeaffc7f] pci 0000:04:00.1: supports D1 pci 0000:04:00.1: PME# supported from D0 D1 D3hot D3cold pci 0000:04:00.1: PME# disabled pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfae00000-0xfaefffff] pci 0000:04:00.1: bridge 64bit mmio pref: [0xfae00000-0xfaefffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:03:00.0: reg 18 io port: [0xd800-0xd8ff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:08:07.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] pci 0000:08:07.0: reg 14 io port: [0xec00-0xec7f] pci 0000:08:07.0: supports D2 pci 0000:08:07.0: PME# supported from D2 D3hot D3cold pci 0000:08:07.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2093 MB/s raid6: int64x2 2307 MB/s raid6: int64x4 1934 MB/s raid6: int64x8 1437 MB/s raid6: sse2x1 4583 MB/s raid6: sse2x2 4801 MB/s raid6: sse2x4 7415 MB/s raid6: using algorithm sse2x4 (7415 MB/s) PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:06: ioport range 0x290-0x297 has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x480-0x4bf has been reserved system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved system 00:07: iomem range 0xffa00000-0xffafffff has been reserved system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved system 00:07: iomem range 0xffe00000-0xffefffff has been reserved system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xfc000000-0xfe7fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff pci 0000:04:00.0: PCI bridge, secondary bus 0000:06 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: disabled pci 0000:04:00.0: PREFETCH window: disabled pci 0000:04:00.1: PCI bridge, secondary bus 0000:05 pci 0000:04:00.1: IO window: disabled pci 0000:04:00.1: MEM window: disabled pci 0000:04:00.1: PREFETCH window: 0x000000fae00000-0x000000faefffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x2000-0x2fff pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.2: PREFETCH window: 0x000000fae00000-0x000000faefffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:1c.3: PREFETCH window: 0x000000f0400000-0x000000f05fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.4: PREFETCH window: 0x000000f0600000-0x000000f07fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0106 -> 0107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:04:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:04:00.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfe7fffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff] pci_bus 0000:07: resource 1 mem: [0xf0000000-0xf03fffff] pci_bus 0000:07: resource 2 pref mem [0xfaf00000-0xfaffffff] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff] pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff] pci_bus 0000:04: resource 2 pref mem [0xfae00000-0xfaefffff] pci_bus 0000:05: resource 2 pref mem [0xfae00000-0xfaefffff] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:02: resource 2 pref mem [0xf0600000-0xf07fffff] pci_bus 0000:08: resource 0 io: [0xe000-0xefff] pci_bus 0000:08: resource 1 mem: [0xfeb00000-0xfebfffff] pci_bus 0000:08: resource 3 io: [0x00-0xffff] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703 microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703 microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703 microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703 Microcode Update Driver: v2.00 , Peter Oruba Intel AES-NI instructions are not detected. HugeTLB registered 2 MB page size, pre-allocated 0 pages DLM (built Jul 21 2010 11:46:32) installed Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.13) msgmni has been set to 15982 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for ghash (ghash-generic) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 280 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 281 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.2: irq 282 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.3: irq 283 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.4: irq 284 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de01d3 nvidiafb: CRTC0 analog found nvidiafb: CRTC1 analog not found i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. nvidiafb: EDID found from BUS1 nvidiafb: EDID found from BUS2 nvidiafb: CRTC 0 appears to have a CRT attached nvidiafb: Using CRT on CRTC 0 mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining nvidiafb: unable to setup MTRR Console: switching to colour frame buffer device 160x64 nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xD0000000) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: SSDT 00000000cff4e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 00000000cff4e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) processor LNXCPU:01: registered as cooling_device1 ACPI: SSDT 00000000cff4e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) processor LNXCPU:02: registered as cooling_device2 ACPI: SSDT 00000000cff4e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) processor LNXCPU:03: registered as cooling_device3 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:1f.2: irq 285 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe900 irq 285 ata2: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe980 irq 285 ata3: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea00 irq 285 ata4: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea80 irq 285 ata5: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb00 irq 285 ata6: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb80 irq 285 Generic platform RAM MTD, (c) 2004 Simtec Electronics PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.16-default ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.16-default ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.16-default uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.16-default uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.16-default uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.16-default uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.16-default uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32.16-default uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder ioatdma: Intel(R) QuickData Technology Driver 4.00 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 hda_codec: ALC888: BIOS auto-probing. ALSA device list: #0: HDA Intel at 0xfbff8000 irq 22 Netfilter messages via NETLINK v0.30. IPv4 over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 33 RxRPC: Registered security type 2 'rxkad' SCTP: Hash tables configured (established 65536 bind 65536) rtc_cmos 00:03: setting system clock to 2010-07-23 15:39:14 UTC (1279899554) BIOS EDD facility v0.16 2004-Jun-25, 3 devices found usb 1-5: new high speed USB device using ehci_hcd and address 2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133 usb 1-5: New USB device found, idVendor=058f, idProduct=6362 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: Mass Storage Device usb 1-5: Manufacturer: Generic usb 1-5: SerialNumber: 058F312D81B1 usb 1-5: configuration #1 chosen from 1 choice ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 8-1: new low speed USB device using uhci_hcd and address 2 usb 8-1: New USB device found, idVendor=0458, idProduct=003a usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-1: Product: Optical Mouse usb 8-1: Manufacturer: Genius usb 8-1: configuration #1 chosen from 1 choice input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4 generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.2-1/input0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: Attached scsi generic sg1 type 0 sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100 ata5.00: configured for UDMA/100 scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg3 type 5 ata6: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md1: detected capacity change from 0 to 479681773568 md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md0: detected capacity change from 0 to 3232432128 md: ... autorun DONE. md1: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 9:1. Freeing unused kernel memory: 484k freed scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg4 type 0 scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdd] Attached SCSI removable disk sd 6:0:0:1: Attached scsi generic sg5 type 0 scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 6:0:0:1: [sde] Attached SCSI removable disk sd 6:0:0:2: Attached scsi generic sg6 type 0 scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 6:0:0:3: Attached scsi generic sg7 type 0 sd 6:0:0:2: [sdf] Attached SCSI removable disk sd 6:0:0:3: [sdg] Attached SCSI removable disk usb-storage: device scan complete udev: starting version 160 md0: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver sky2 driver version 1.25 sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC chip revision 2 sky2 0000:03:00.0: irq 286 for MSI/MSI-X sky2 eth0: addr 00:1d:60:60:74:a1 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 sky2 0000:02:00.0: irq 287 for MSI/MSI-X sky2 eth1: addr 00:1d:60:60:70:92 unknown partition table ohci1394 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: Node added: ID:BUS[0-00:1023] GUID[00e018000305e5fc] ieee1394: Node added: ID:BUS[0-01:1023] GUID[001b8c8000000105] ieee1394: Host added: ID:BUS[0-02:1023] GUID[0011d80001762a80] scsi7 : SBP-2 IEEE-1394 EXT3 FS on md1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with writeback data mode. ieee1394: sbp2: Error logging into SBP-2 device - failed sbp2: probe of 001b8c8000000105-0 failed with error -16 BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: [] sbp2_update+0x1c/0x1f1 [sbp2] PGD 22e926067 PUD 22e6d5067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/bus/ieee1394/drivers/sbp2/uevent CPU 0 Modules linked in: sbp2 firewire_net firewire_ohci firewire_core ohci1394 ieee1394 sky2 i2c_i801 Pid: 1397, comm: knodemgrd_0 Not tainted 2.6.32.16-default #9 System Product Name RIP: 0010:[] [] sbp2_update+0x1c/0x1f1 [sbp2] RSP: 0018:ffff88022d101ca0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88022fab2ed0 RDX: 0000000000000000 RSI: 0000000000000020 RDI: ffff88022f925048 RBP: ffff88022d101cc0 R08: ffff88022d100000 R09: ffff880028210340 R10: 0000000000000400 R11: 00000000000005fe R12: ffff88022f925000 R13: ffff88022f9250a8 R14: ffff88022e693340 R15: ffff88022e687400 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000000000e0 CR3: 000000022eadc000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process knodemgrd_0 (pid: 1397, threadinfo ffff88022d100000, task ffff88022d1e6050) Stack: ffff88022d101cc0 ffffffff8104f5c3 ffffffffa005d628 ffff88022f925000 <0> ffff88022d101cf0 ffffffffa001d385 ffff88022e6d1800 ffffffffa001d339 <0> ffff88022d101d10 ffff88022e693340 ffff88022d101d50 ffffffff812ae68a Call Trace: [] ? down+0x33/0x38 [] update_pdrv+0x4c/0x79 [ieee1394] [] ? update_pdrv+0x0/0x79 [ieee1394] [] class_for_each_device+0x6e/0x99 [] ? hpsb_free_packet+0x2c/0x2e [ieee1394] [] node_probe+0x286/0x304 [ieee1394] [] ? node_probe+0x0/0x304 [ieee1394] [] class_for_each_device+0x6e/0x99 [] ? csr1212_destroy_csr+0x51/0x59 [ieee1394] [] nodemgr_host_thread+0x729/0x8bc [ieee1394] [] ? nodemgr_host_thread+0x0/0x8bc [ieee1394] [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 Code: 31 c0 48 83 c4 20 5b 41 5c 41 5d 41 5e c9 c3 55 48 83 c7 48 48 89 e5 41 54 53 48 83 ec 10 e8 30 29 25 e1 be 20 00 00 00 48 89 c3 <4c> 8b a0 e0 00 00 00 48 8b 40 50 c7 00 00 00 00 00 48 8b 43 50 RIP [] sbp2_update+0x1c/0x1f1 [sbp2] RSP CR2: 00000000000000e0 ---[ end trace 5f2aa54eef767b34 ]--- sky2 eth0: enabling interface Adding 16787916k swap on /dev/sda2. Priority:-1 extents:1 across:16787916k Adding 16787916k swap on /dev/sdb2. Priority:-2 extents:1 across:16787916k sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max)