Linux version 2.6.35-rc6-default (root@454pc) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #1 SMP Fri Jul 23 15:29:50 MEST 2010 Command line: root=/dev/md1 idebus=66 udev BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff40000 (usable) BIOS-e820: 00000000cff40000 - 00000000cff4e000 (ACPI data) BIOS-e820: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS) BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x230000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0D0000000 mask FF0000000 uncachable 1 base 0E0000000 mask FE0000000 uncachable 2 base 000000000 mask E00000000 write-back 3 base 200000000 mask FE0000000 write-back 4 base 220000000 mask FF0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcff40 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 init_memory_mapping: 0000000000000000-00000000cff40000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cff40000 page 4k kernel direct mapping tables up to cff40000 @ 12000-18000 init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ 16000-20000 ACPI: RSDP 00000000000fb140 00024 (v02 ACPIAM) ACPI: XSDT 00000000cff40100 0004C (v01 A_M_I_ OEMXSDT 02000822 MSFT 00000097) ACPI: FACP 00000000cff40290 000F4 (v03 A_M_I_ OEMFACP 02000822 MSFT 00000097) ACPI: DSDT 00000000cff405d0 08586 (v01 A0754 A0754001 00000001 INTL 20060113) ACPI: FACS 00000000cff4e000 00040 ACPI: APIC 00000000cff40390 00078 (v01 A_M_I_ OEMAPIC 02000822 MSFT 00000097) ACPI: MCFG 00000000cff40410 0003C (v01 A_M_I_ OEMMCFG 02000822 MSFT 00000097) ACPI: OEMB 00000000cff4e040 00081 (v01 A_M_I_ AMI_OEM 02000822 MSFT 00000097) ACPI: HPET 00000000cff48b60 00038 (v01 A_M_I_ OEMHPET 02000822 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880002200000-ffff8800093fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000cff40 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2096846 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3926 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833400 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 255, address 0xfec10000, GSI 24-279 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 296 early_res array is doubled to 64 at [1b000 - 1b7ff] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s76352 r8192 d21952 u524288 pcpu-alloc: s76352 r8192 d21952 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065486 Kernel command line: root=/dev/md1 idebus=66 udev PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Subtract (53 early reservations) #1 [0001000000 - 000190b790] TEXT DATA BSS #2 [000190c000 - 000190c28c] BRK #3 [00000ff790 - 0000100000] BIOS reserved #4 [00000ff780 - 00000ff790] MP-table mpf #5 [000009ec00 - 00000f1540] BIOS reserved #6 [00000f16fc - 00000ff780] BIOS reserved #7 [00000f1540 - 00000f16fc] MP-table mpc #8 [0000010000 - 0000012000] TRAMPOLINE #9 [0000012000 - 0000016000] PGTABLE #10 [0000016000 - 000001b000] PGTABLE #11 [000190c2c0 - 000190d2c0] BOOTMEM #12 [000190b7c0 - 000190bdc0] BOOTMEM #13 [000210e000 - 000210f000] BOOTMEM #14 [000210f000 - 0002110000] BOOTMEM #15 [0002200000 - 0009400000] MEMMAP 0 #16 [000190bdc0 - 000190bf40] BOOTMEM #17 [000190d2c0 - 00019252c0] BOOTMEM #18 [00019252c0 - 000193d2c0] BOOTMEM #19 [000193e000 - 000193f000] BOOTMEM #20 [000190bf40 - 000190bf81] BOOTMEM #21 [000193d2c0 - 000193d346] BOOTMEM #22 [000193d380 - 000193d5e8] BOOTMEM #23 [000193d600 - 000193d668] BOOTMEM #24 [000193d680 - 000193d6e8] BOOTMEM #25 [000193d700 - 000193d768] BOOTMEM #26 [000193d780 - 000193d7e8] BOOTMEM #27 [000193d800 - 000193d868] BOOTMEM #28 [000193d880 - 000193d8e8] BOOTMEM #29 [000193d900 - 000193d968] BOOTMEM #30 [000193d980 - 000193d9e8] BOOTMEM #31 [000193da00 - 000193da68] BOOTMEM #32 [000193da80 - 000193dae8] BOOTMEM #33 [000190bfc0 - 000190bfdd] BOOTMEM #34 [000193db00 - 000193db1d] BOOTMEM #35 [0001a00000 - 0001a1a000] BOOTMEM #36 [0001a80000 - 0001a9a000] BOOTMEM #37 [0001b00000 - 0001b1a000] BOOTMEM #38 [0001b80000 - 0001b9a000] BOOTMEM #39 [000193db40 - 000193db48] BOOTMEM #40 [000193db80 - 000193db88] BOOTMEM #41 [000193dbc0 - 000193dbd0] BOOTMEM #42 [000193dc00 - 000193dc20] BOOTMEM #43 [000193dc40 - 000193dd70] BOOTMEM #44 [000193dd80 - 000193ddd0] BOOTMEM #45 [000193de00 - 000193de50] BOOTMEM #46 [000193f000 - 0001947000] BOOTMEM #47 [0009400000 - 0009c00000] BOOTMEM #48 [0001b9a000 - 0001f9a000] BOOTMEM #49 [0009c00000 - 000dc00000] BOOTMEM #50 [0001947000 - 0001967000] BOOTMEM #51 [0001967000 - 00019a7000] BOOTMEM #52 [000001b800 - 0000023800] BOOTMEM Memory: 8182436k/9175040k available (4900k kernel code, 787656k absent, 204948k reserved, 3249k data, 508k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2504.906 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5009.81 BogoMIPS (lpj=10019624) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 Freeing SMP alternatives: 24k freed ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 Booting Node 0, Processors #1 #2 #3 Ok. Brought up 4 CPUs Total of 4 processors activated (20037.47 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 9290.000 MB/sec xor: using function: generic_sse (9290.000 MB/sec) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 00000000cff4e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) ACPI: SSDT 00000000cff4e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) ACPI: SSDT 00000000cff4e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) ACPI: SSDT 00000000cff4e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f] pci 0000:00:1a.7: reg 10: [mem 0xfbfffc00-0xfbffffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f] pci 0000:00:1d.7: reg 10: [mem 0xfbfff800-0xfbfffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07] pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883] pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807] pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483] pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f] pci 0000:00:1f.2: reg 24: [mem 0xfbffe800-0xfbffefff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xfbfff400-0xfbfff4ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe7fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 07-07] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] pci 0000:04:00.0: supports D1 pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: reg 10: [mem 0xfeaffc00-0xfeaffc7f 64bit] pci 0000:04:00.1: supports D1 pci 0000:04:00.1: PME# supported from D0 D1 D3hot D3cold pci 0000:04:00.1: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 04-06] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.2: bridge window [mem 0xfae00000-0xfaefffff 64bit pref] pci 0000:04:00.0: PCI bridge to [bus 06-06] pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.1: PCI bridge to [bus 05-05] pci 0000:04:00.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:04:00.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:04:00.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] pci 0000:03:00.0: reg 18: [io 0xd800-0xd8ff] pci 0000:03:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff] pci 0000:02:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.4: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:08:07.0: reg 10: [mem 0xfebff800-0xfebfffff] pci 0000:08:07.0: reg 14: [io 0xec00-0xec7f] pci 0000:08:07.0: supports D2 pci 0000:08:07.0: PME# supported from D2 D3hot D3cold pci 0000:08:07.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2092 MB/s raid6: int64x2 2307 MB/s raid6: int64x4 1928 MB/s raid6: int64x8 1390 MB/s raid6: sse2x1 4583 MB/s raid6: sse2x2 4853 MB/s raid6: sse2x4 7329 MB/s raid6: using algorithm sse2x4 (7329 MB/s) Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009ec00 - 000000000009ffff reserve RAM buffer: 00000000cff40000 - 00000000cfffffff HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:06: [io 0x0290-0x0297] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x0800-0x087f] has been reserved system 00:07: [io 0x0480-0x04bf] has been reserved system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved system 00:07: [mem 0xffa00000-0xffafffff] has been reserved system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved system 00:07: [mem 0xffe00000-0xffefffff] has been reserved system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0000000-0xf03fffff] pci 0000:00:1c.3: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref] pci 0000:00:1c.4: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:01:00.0: BAR 6: assigned [mem 0xfe000000-0xfe01ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe7fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 07-07] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] pci 0000:04:00.0: PCI bridge to [bus 06-06] pci 0000:04:00.0: bridge window [io disabled] pci 0000:04:00.0: bridge window [mem disabled] pci 0000:04:00.0: bridge window [mem pref disabled] pci 0000:04:00.1: PCI bridge to [bus 05-05] pci 0000:04:00.1: bridge window [io disabled] pci 0000:04:00.1: bridge window [mem disabled] pci 0000:04:00.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-06] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.2: bridge window [mem 0xfae00000-0xfaefffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.4: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 08-08] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0106 -> 0107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:04:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:04:00.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe7fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf03fffff] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:04: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref] pci_bus 0000:05: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] pci_bus 0000:08: resource 0 [io 0xe000-0xefff] pci_bus 0000:08: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:08: resource 8 [mem 0xd0000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880009c00000 - ffff88000dc00000 software IO TLB at phys 0x9c00000 - 0xdc00000 microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703 microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703 microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703 microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703 microcode: Microcode Update Driver: v2.00 , Peter Oruba Intel AES-NI instructions are not detected. HugeTLB registered 2 MB page size, pre-allocated 0 pages DLM (built Jul 23 2010 15:21:25) installed Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.14) msgmni has been set to 15981 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for fips(ansi_cprng) (fips_ansi_cprng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 296 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 297 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 298 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 299 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 300 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de01d3 nvidiafb: CRTC0 analog found nvidiafb: CRTC1 analog not found i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. nvidiafb: EDID found from BUS1 nvidiafb: EDID found from BUS2 nvidiafb: CRTC 0 appears to have a CRT attached nvidiafb: Using CRT on CRTC 0 mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining nvidiafb: unable to setup MTRR Console: switching to colour frame buffer device 160x64 nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xD0000000) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Non-volatile memory driver v1.3 Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:1f.2: irq 301 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe900 irq 301 ata2: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe980 irq 301 ata3: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea00 irq 301 ata4: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea80 irq 301 ata5: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb00 irq 301 ata6: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb80 irq 301 mtdoops: mtd device (mtddev=name/number) must be supplied Generic platform RAM MTD, (c) 2004 Simtec Electronics PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35-rc6-default ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35-rc6-default ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.35-rc6-default uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder ioatdma: Intel(R) QuickData Technology Driver 4.00 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 302 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 hda_codec: ALC888: BIOS auto-probing. ALSA device list: #0: HDA Intel at 0xfbff8000 irq 302 Netfilter messages via NETLINK v0.30. IPv4 over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 33 RxRPC: Registered security type 2 'rxkad' SCTP: Hash tables configured (established 65536 bind 65536) rtc_cmos 00:03: setting system clock to 2010-07-23 21:53:54 UTC (1279922034) BIOS EDD facility v0.16 2004-Jun-25, 3 devices found usb 1-5: new high speed USB device using ehci_hcd and address 2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 usb 1-5: New USB device found, idVendor=058f, idProduct=6362 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: Mass Storage Device usb 1-5: Manufacturer: Generic usb 1-5: SerialNumber: 058F312D81B1 scsi6 : usb-storage 1-5:1.0 scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 8-1: new low speed USB device using uhci_hcd and address 2 usb 8-1: New USB device found, idVendor=0458, idProduct=003a usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-1: Product: Optical Mouse usb 8-1: Manufacturer: Genius input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4 generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.2-1/input0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg2 type 0 scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdc] Attached SCSI removable disk scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 6:0:0:2: Attached scsi generic sg4 type 0 sd 6:0:0:1: [sdd] Attached SCSI removable disk scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 6:0:0:3: Attached scsi generic sg5 type 0 sd 6:0:0:2: [sde] Attached SCSI removable disk sd 6:0:0:3: [sdf] Attached SCSI removable disk ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: Attached scsi generic sg6 type 0 sd 2:0:0:0: [sdg] Write Protect is off sd 2:0:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sd 2:0:0:0: [sdg] Attached SCSI disk ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100 ata5.00: configured for UDMA/100 scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg7 type 5 ata6: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: md/raid1:md1: active with 2 out of 2 mirrors md1: detected capacity change from 0 to 479681773568 md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md/raid1:md0: active with 2 out of 2 mirrors md0: detected capacity change from 0 to 3232432128 md: ... autorun DONE. md1: detected capacity change from 0 to 479681773568 md1: unknown partition table EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (md1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 9:1. Freeing unused kernel memory: 508k freed udev: starting version 160 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [irq 1024-1039 pref] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver firewire_ohci 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 firewire_ohci: Added fw-ohci device 0000:08:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1 md0: unknown partition table sky2: driver version 1.28 sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC chip revision 2 sky2 0000:03:00.0: irq 303 for MSI/MSI-X sky2 0000:03:00.0: eth0: addr 00:1d:60:60:74:a1 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 sky2 0000:02:00.0: irq 304 for MSI/MSI-X sky2 0000:02:00.0: eth1: addr 00:1d:60:60:70:92 firewire_core: created device fw0: GUID 0011d80001762a80, S400 firewire_core: created device fw1: GUID 001b8c8000000105, S400 firewire_core: created device fw2: GUID 00e018000305e5fc, S400 firewire_core: phy config: card 0, new root=ffc2, gap_count=7 scsi7 : SBP-2 IEEE-1394 firewire_core: refreshed device fw0 firewire_core: phy config: card 0, new root=ffc2, gap_count=7 firewire_net: firewire0: IPv4 over FireWire on device 0011d80001762a80 EXT3-fs (md1): using internal journal sky2 0000:03:00.0: eth0: enabling interface Adding 16787920k swap on /dev/sda2. Priority:-1 extents:1 across:16787920k Adding 16787920k swap on /dev/sdb2. Priority:-2 extents:1 across:16787920k sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 firewire_sbp2: fw1.0: failed to login to LUN 0000 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 firewire_sbp2: released fw1.0, target 7:0:0 firewire_core: phy config: card 0, new root=ffc2, gap_count=7 firewire_core: phy config: card 0, new root=ffc2, gap_count=7 scsi8 : SBP-2 IEEE-1394 firewire_core: created device fw1: GUID 001b8c8000000105, S400 firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries) scsi 8:0:0:0: Direct-Access-RBC JMicron HDD PQ: 0 ANSI: 4 sd 8:0:0:0: Attached scsi generic sg8 type 14 sd 8:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 8:0:0:0: [sdh] Write Protect is off sd 8:0:0:0: [sdh] Mode Sense: 10 00 00 00 sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 firewire_sbp2: fw1.0: sbp2_scsi_abort firewire_sbp2: fw1.0: sbp2_scsi_abort sd 8:0:0:0: Device offlined - not ready after error recovery sd 8:0:0:0: rejecting I/O to offline device sd 8:0:0:0: rejecting I/O to offline device sd 8:0:0:0: rejecting I/O to offline device sd 8:0:0:0: rejecting I/O to offline device sd 8:0:0:0: [sdh] READ CAPACITY failed sd 8:0:0:0: [sdh] Result: hostbyte=0x01 driverbyte=0x00 sd 8:0:0:0: [sdh] Sense not available. sd 8:0:0:0: rejecting I/O to offline device sd 8:0:0:0: rejecting I/O to offline device sd 8:0:0:0: [sdh] Asking for cache data failed sd 8:0:0:0: [sdh] Assuming drive cache: write through sd 8:0:0:0: [sdh] Attached SCSI disk firewire_core: phy config: card 0, new root=ffc1, gap_count=5 sd 8:0:0:0: [sdh] Stopping disk sd 8:0:0:0: [sdh] START_STOP FAILED sd 8:0:0:0: [sdh] Result: hostbyte=0x02 driverbyte=0x00 firewire_sbp2: released fw1.0, target 8:0:0