[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4C51AB6A.4030105@oracle.com>
Date: Thu, 29 Jul 2010 09:25:14 -0700
From: Randy Dunlap <randy.dunlap@...cle.com>
To: Janne Grunau <j@...nau.net>
CC: Jarod Wilson <jarod@...sonet.com>,
Stephen Rothwell <sfr@...b.auug.org.au>,
lirc-list@...ts.sourceforge.net, linux-next@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>,
Maxim Levitsky <maximlevitsky@...il.com>,
linux-media@...r.kernel.org,
Mauro Carvalho Chehab <mchehab@...hat.com>
Subject: Re: linux-next: Tree for July 28 (lirc #2)
On 07/29/10 05:39, Janne Grunau wrote:
> On Thu, Jul 29, 2010 at 12:27:01AM -0400, Jarod Wilson wrote:
>> On Wed, Jul 28, 2010 at 6:27 PM, Jarod Wilson <jarod@...sonet.com> wrote:
>>> On Wed, Jul 28, 2010 at 6:16 PM, Randy Dunlap <randy.dunlap@...cle.com> wrote:
>>>> On 07/28/10 15:04, Janne Grunau wrote:
>>>>> On Wed, Jul 28, 2010 at 10:24:17AM -0700, Randy Dunlap wrote:
>>>>>> On Wed, 28 Jul 2010 16:28:55 +1000 Stephen Rothwell wrote:
>>>>>>
>>>>>>> Hi all,
>>>>>>>
>>>>>>> Changes since 20100727:
>>>>>>
>>>>>>
>>>>>> When USB_SUPPORT is not enabled and MEDIA_SUPPORT is not enabled:
>>>>>>
>>>>>
>>>>> following patch should fix it
>>>>>
>>>>> Janne
>>>>
>>>> Acked-by: Randy Dunlap <randy.dunlap@...cle.com>
>>>>
>>>> Thanks.
>>>
>>> Acked-by: Jarod Wilson <jarod@...hat.com>
>>>
>>> Indeed, thanks much, Janne!
>>
>> D'oh, I should have looked a bit closer... What if instead of making
>> all the drivers depend on both LIRC && LIRC_STAGING, LIRC_STAGING just
>> depends on LIRC?
>
> I started adding LIRC to each driver by one. Adding LIRC as LIRC_STAGING
> dependency is simpler. See updated patch.
>
>> And there are a few depends lines with duplicate
>> USB's in them and LIRC_IMON should have USB added to it (technically,
>
> D'oh, I've must have stopped reading after LIRC_STAG...
>
> fixed and added additional dependencies
>
> Janne
Yes, this one works also. Thanks for the update.
>
> From 45d384de90e3709a986700db14888eff77bb7e1f Mon Sep 17 00:00:00 2001
> From: Janne Grunau <j@...nau.net>
> Date: Wed, 28 Jul 2010 23:53:35 +0200
> Subject: [PATCH 1/2] V4L/DVB: staging/lirc: fix Kconfig dependencies
>
> Signed-off-by: Janne Grunau <j@...nau.net>
> ---
> drivers/staging/lirc/Kconfig | 19 ++++++++++---------
> 1 files changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
> index 968c2ade..ab30a09 100644
> --- a/drivers/staging/lirc/Kconfig
> +++ b/drivers/staging/lirc/Kconfig
> @@ -3,6 +3,7 @@
> #
> menuconfig LIRC_STAGING
> bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
> + depends on LIRC
> help
> Say Y here, and all supported Linux Infrared Remote Control IR and
> RF receiver and transmitter drivers will be displayed. When paired
> @@ -13,13 +14,13 @@ if LIRC_STAGING
>
> config LIRC_BT829
> tristate "BT829 based hardware"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && PCI
> help
> Driver for the IR interface on BT829-based hardware
>
> config LIRC_ENE0100
> tristate "ENE KB3924/ENE0100 CIR Port Reciever"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && PNP
> help
> This is a driver for CIR port handled by ENE KB3924 embedded
> controller found on some notebooks.
> @@ -27,7 +28,7 @@ config LIRC_ENE0100
>
> config LIRC_I2C
> tristate "I2C Based IR Receivers"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && I2C
> help
> Driver for I2C-based IR receivers, such as those commonly
> found onboard Hauppauge PVR-150/250/350 video capture cards
> @@ -40,7 +41,7 @@ config LIRC_IGORPLUGUSB
>
> config LIRC_IMON
> tristate "Legacy SoundGraph iMON Receiver and Display"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && USB
> help
> Driver for the original SoundGraph iMON IR Receiver and Display
>
> @@ -48,7 +49,7 @@ config LIRC_IMON
>
> config LIRC_IT87
> tristate "ITE IT87XX CIR Port Receiver"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && PNP
> help
> Driver for the ITE IT87xx IR Receiver
>
> @@ -60,13 +61,13 @@ config LIRC_ITE8709
>
> config LIRC_PARALLEL
> tristate "Homebrew Parallel Port Receiver"
> - depends on LIRC_STAGING && !SMP
> + depends on LIRC_STAGING && PARPORT && !SMP
> help
> Driver for Homebrew Parallel Port Receivers
>
> config LIRC_SASEM
> tristate "Sasem USB IR Remote"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && USB
> help
> Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
>
> @@ -91,7 +92,7 @@ config LIRC_SIR
>
> config LIRC_STREAMZAP
> tristate "Streamzap PC Receiver"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && USB
> help
> Driver for the Streamzap PC Receiver
>
> @@ -103,7 +104,7 @@ config LIRC_TTUSBIR
>
> config LIRC_ZILOG
> tristate "Zilog/Hauppauge IR Transmitter"
> - depends on LIRC_STAGING
> + depends on LIRC_STAGING && I2C
> help
> Driver for the Zilog/Hauppauge IR Transmitter, found on
> PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists