g unused kernel memory: 456k freed [ 5.136990] Write protecting the kernel text: 2632k [ 5.137063] Write protecting the kernel read-only data: 900k [ 5.195608] udev: starting version 158 [ 5.305722] acpi device:05: registered as cooling_device2 [ 5.305918] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input4 [ 5.305926] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 5.325995] uhci_hcd: USB Universal Host Controller Interface driver [ 5.326260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.326263] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 5.326375] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5.326640] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5.326651] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.326661] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.326665] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.326730] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 5.326773] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 5.326820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.326823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.326826] usb usb1: Product: UHCI Host Controller [ 5.326829] usb usb1: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd [ 5.326831] usb usb1: SerialNumber: 0000:00:1d.0 [ 5.326940] hub 1-0:1.0: USB hub found [ 5.326946] hub 1-0:1.0: 2 ports detected [ 5.327182] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 5.327347] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 5.327359] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.327375] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.327380] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.327420] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.327439] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 5.327452] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.331327] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 5.331343] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 [ 5.336651] Linux agpgart interface v0.103 [ 5.339991] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 5.339994] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 5.340095] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.340120] e1000e 0000:02:00.0: setting latency timer to 64 [ 5.340309] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 5.340699] e1000e 0000:02:00.0: Disabling ASPM L0s [ 5.344102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.344105] libata version 3.00 loaded. [ 5.344138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.344142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.344145] usb usb2: Product: EHCI Host Controller [ 5.344148] usb usb2: Manufacturer: Linux 2.6.34.1-zgws1 ehci_hcd [ 5.344150] usb usb2: SerialNumber: 0000:00:1d.7 [ 5.344357] hub 2-0:1.0: USB hub found [ 5.344364] hub 2-0:1.0: 8 ports detected [ 5.344482] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.344490] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.344495] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.344535] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.344577] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 5.344615] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.344618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.344621] usb usb3: Product: UHCI Host Controller [ 5.344623] usb usb3: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd [ 5.344626] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.344720] hub 3-0:1.0: USB hub found [ 5.344725] hub 3-0:1.0: 2 ports detected [ 5.347870] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 5.348150] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 5.348161] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.348169] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.348174] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.348225] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.348262] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 5.348306] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.348309] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.348312] usb usb4: Product: UHCI Host Controller [ 5.348314] usb usb4: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd [ 5.348317] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.348420] hub 4-0:1.0: USB hub found [ 5.348425] hub 4-0:1.0: 2 ports detected [ 5.348500] ata_piix 0000:00:1f.1: version 2.13 [ 5.348510] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 5.348554] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 5.348648] scsi0 : ata_piix [ 5.348747] scsi1 : ata_piix [ 5.349523] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 5.349527] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 5.349577] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.349585] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.349589] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.349640] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.349669] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 5.349711] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.349714] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.349717] usb usb5: Product: UHCI Host Controller [ 5.349720] usb usb5: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd [ 5.349723] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.349830] hub 5-0:1.0: USB hub found [ 5.349836] hub 5-0:1.0: 2 ports detected [ 5.350121] ata2: port disabled. ignoring. [ 5.431411] ahci 0000:00:1f.2: version 3.0 [ 5.431430] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 5.431485] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 5.431560] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 5.431564] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 5.431570] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.431727] scsi2 : ahci [ 5.431804] scsi3 : ahci [ 5.431867] scsi4 : ahci [ 5.431940] scsi5 : ahci [ 5.432058] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 30 [ 5.432061] ata4: DUMMY [ 5.432062] ata5: DUMMY [ 5.432064] ata6: DUMMY [ 5.457464] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:da:7d:6b [ 5.457468] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 5.457606] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 [ 5.512573] ata1.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33 [ 5.528495] ata1.00: configured for UDMA/33 [ 5.530345] scsi 0:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5 [ 5.657080] usb 2-5: new high speed USB device using ehci_hcd and address 2 [ 5.748096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.749280] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5.749285] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5.749289] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5.750372] ata3.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133 [ 5.750375] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.751707] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5.751712] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5.751716] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5.752839] ata3.00: configured for UDMA/133 [ 5.770575] ata3.00: configured for UDMA/133 [ 5.770578] ata3: EH complete [ 5.770658] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 [ 5.779704] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.779774] sd 2:0:0:0: [sda] Write Protect is off [ 5.779777] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.779806] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.779969] sda: [ 5.790425] usb 2-5: New USB device found, idVendor=14cd, idProduct=121c [ 5.790432] usb 2-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 5.790438] usb 2-5: Product: Mass Storage Device [ 5.790443] usb 2-5: Manufacturer: Generic [ 5.790448] usb 2-5: SerialNumber: 812320090519 [ 5.798461] Initializing USB Mass Storage driver... [ 5.798567] scsi6 : usb-storage 2-5:1.0 [ 5.798660] usbcore: registered new interface driver usb-storage [ 5.798663] USB Mass Storage support registered. [ 5.900051] usb 2-6: new high speed USB device using ehci_hcd and address 3 [ 6.032419] usb 2-6: New USB device found, idVendor=04b3, idProduct=4485 [ 6.032422] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.032816] hub 2-6:1.0: USB hub found [ 6.032905] hub 2-6:1.0: 4 ports detected [ 6.116519] sda1 [ 6.116789] sd 2:0:0:0: [sda] Attached SCSI disk [ 6.122759] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.122763] Uniform CD-ROM driver Revision: 3.20 [ 6.122859] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.127582] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 6.127624] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.333225] [drm] Initialized drm 1.1.0 20060810 [ 6.370123] [drm] radeon kernel modesetting enabled. [ 6.370243] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 6.370290] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 6.370306] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.370325] radeon 0000:01:00.0: setting latency timer to 64 [ 6.372102] [drm] initializing kernel modesetting (RV515 0x1002:0x7145). [ 6.381089] [drm] register mmio base: 0xEE100000 [ 6.381092] [drm] register mmio size: 65536 [ 6.381258] ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP [ 6.381493] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [ 6.381506] [drm] 5 Power State(s) [ 6.381509] [drm] State 0 Battery [ 6.381511] [drm] 1 PCIE Lanes [ 6.381512] [drm] 1 Clock Mode(s) [ 6.381514] [drm] 0 engine/memory: 129000/135000 [ 6.381517] [drm] State 1 Battery [ 6.381518] [drm] 1 PCIE Lanes [ 6.381520] [drm] 1 Clock Mode(s) [ 6.381522] [drm] 0 engine/memory: 210000/135000 [ 6.381525] [drm] State 2 Powersave [ 6.381526] [drm] 1 PCIE Lanes [ 6.381528] [drm] 1 Clock Mode(s) [ 6.381530] [drm] 0 engine/memory: 324000/135000 [ 6.381533] [drm] State 3 Default [ 6.381534] [drm] 16 PCIE Lanes [ 6.381536] [drm] 1 Clock Mode(s) [ 6.381538] [drm] 0 engine/memory: 342000/350000 [ 6.381540] [drm] State 4 Default (default) [ 6.381542] [drm] 16 PCIE Lanes [ 6.381544] [drm] 1 Clock Mode(s) [ 6.381546] [drm] 0 engine/memory: 392000/350000 [ 6.381555] [drm] radeon: power management initialized [ 6.381565] [drm] Generation 2 PCI interface, using max accessible memory [ 6.381575] radeon 0000:01:00.0: VRAM: 128M 0x00000000 - 0x07FFFFFF (128M used) [ 6.381579] radeon 0000:01:00.0: GTT: 512M 0x08000000 - 0x27FFFFFF [ 6.381765] radeon 0000:01:00.0: irq 31 for MSI/MSI-X [ 6.381777] [drm] radeon: using MSI. [ 6.381829] [drm] radeon: irq initialized. [ 6.382609] [drm] Detected VRAM RAM=128M, BAR=128M [ 6.382612] [drm] RAM width 128bits DDR [ 6.382728] [TTM] Zone kernel: Available graphics memory: 439548 kiB. [ 6.382731] [TTM] Zone highmem: Available graphics memory: 1557152 kiB. [ 6.382749] [drm] radeon: 128M of VRAM memory ready [ 6.382752] [drm] radeon: 512M of GTT memory ready. [ 6.382773] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.385802] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140) [ 6.385838] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 6.387136] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 6.387162] [drm] radeon: cp idle (0x10000C03) [ 6.387201] [drm] Loading R500 Microcode [ 6.387205] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin [ 6.390354] [drm] radeon: ring at 0x0000000008000000 [ 6.390413] [drm] ring test succeeded in 4 usecs [ 6.390598] [drm] radeon: ib pool ready. [ 6.390699] [drm] ib test succeeded in 0 usecs [ 6.390728] [drm] Unknown TV standard; defaulting to NTSC [ 6.390899] [drm] Radeon Display Connectors [ 6.390901] [drm] Connector 0: [ 6.390903] [drm] VGA [ 6.390906] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 6.390908] [drm] Encoders: [ 6.390910] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.390912] [drm] Connector 1: [ 6.390914] [drm] LVDS [ 6.390916] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 6.390919] [drm] Encoders: [ 6.390921] [drm] LCD1: INTERNAL_LVTM1 [ 6.390923] [drm] Connector 2: [ 6.390924] [drm] DVI-I [ 6.390926] [drm] HPD1 [ 6.390929] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 6.390931] [drm] Encoders: [ 6.390933] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 6.496045] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 6.663730] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 6.663734] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.663737] usb 5-1: Product: BCM2045B [ 6.663740] usb 5-1: Manufacturer: Broadcom Corp [ 6.664949] [drm] fb mappable at 0xD80C0000 [ 6.664952] [drm] vram apper at 0xD8000000 [ 6.664954] [drm] size 7680000 [ 6.664955] [drm] fb depth is 24 [ 6.664957] [drm] pitch is 6400 [ 6.720466] Console: switching to colour frame buffer device 175x65 [ 6.727852] fb0: radeondrmfb frame buffer device [ 6.727855] registered panic notifier [ 6.727860] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0 [ 6.797816] scsi 6:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS [ 6.798745] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 6.799280] sd 6:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [ 6.799778] sd 6:0:0:0: [sdb] Write Protect is off [ 6.799782] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 6.799785] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.803028] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.803093] sdb: sdb4 [ 6.806035] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.806104] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 6.908037] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 6.909069] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 7.080708] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 7.080712] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.080716] usb 5-2: Product: Biometric Coprocessor [ 7.080718] usb 5-2: Manufacturer: STMicroelectronics [ 7.156174] usb 2-6.2: new low speed USB device using ehci_hcd and address 6 [ 7.252631] usb 2-6.2: New USB device found, idVendor=1bcf, idProduct=0007 [ 7.252636] usb 2-6.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7.252639] usb 2-6.2: Product: USB Optical Mouse [ 7.261671] usbcore: registered new interface driver hiddev [ 7.264938] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input5 [ 7.265271] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-6.2/input0 [ 7.265417] usbcore: registered new interface driver usbhid [ 7.265420] usbhid: USB HID core driver [ 7.615658] md: raid1 personality registered for level 1 [ 7.684070] raid6: int32x1 571 MB/s [ 7.752038] raid6: int32x2 697 MB/s [ 7.820149] raid6: int32x4 576 MB/s [ 7.888098] raid6: int32x8 472 MB/s [ 7.956028] raid6: mmxx1 1813 MB/s [ 8.024031] raid6: mmxx2 2075 MB/s [ 8.092034] raid6: sse1x1 1376 MB/s [ 8.160034] raid6: sse1x2 1852 MB/s [ 8.228010] raid6: sse2x1 2106 MB/s [ 8.296030] raid6: sse2x2 2336 MB/s [ 8.296033] raid6: using algorithm sse2x2 (2336 MB/s) [ 8.297410] xor: automatically using best checksumming function: pIII_sse [ 8.316009] pIII_sse : 4994.000 MB/sec [ 8.316011] xor: using function: pIII_sse (4994.000 MB/sec) [ 8.321750] md: raid6 personality registered for level 6 [ 8.321753] md: raid5 personality registered for level 5 [ 8.321755] md: raid4 personality registered for level 4 [ 10.474844] PM: Starting manual resume from disk [ 10.490588] EXT3-fs (dm-12): recovery required on readonly filesystem [ 10.490593] EXT3-fs (dm-12): write access will be enabled during recovery [ 10.515959] EXT3-fs (dm-12): recovery complete [ 10.515984] kjournald starting. Commit interval 5 seconds [ 10.524577] EXT3-fs (dm-12): mounted filesystem with writeback data mode [ 12.234536] udev: starting version 158 [ 12.603415] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 12.688053] Bluetooth: Core ver 2.15 [ 12.688298] NET: Registered protocol family 31 [ 12.688301] Bluetooth: HCI device and connection manager initialized [ 12.688304] Bluetooth: HCI socket layer initialized [ 12.712827] Non-volatile memory driver v1.3 [ 12.713683] intel_rng: FWH not detected [ 12.714101] rtc_cmos 00:07: RTC can wake from S4 [ 12.714154] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 12.714191] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 12.838929] cfg80211: Calling CRDA to update world regulatory domain [ 12.852309] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 12.852786] usbcore: registered new interface driver btusb [ 12.868136] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012] [ 13.000907] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 13.000913] yenta_cardbus 0000:15:00.0: Socket status: 30000007 [ 13.000922] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff] [ 13.000926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff: excluding 0xa000-0xa0ff 0xa400-0xa4ff [ 13.050121] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff] [ 13.050126] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff [ 13.050143] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 13.050146] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff [ 13.050165] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7] [ 13.050169] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0xcf7: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 0x800-0x80f [ 13.056877] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff] [ 13.056881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd00-0xffff: excluding 0x1000-0x107f 0x1180-0x11bf 0x15e0-0x15ef 0x1600-0x1607 0x1610-0x161f 0x1648-0x165f 0x1680-0x169f 0x1800-0x188f 0x18a8-0x18cf 0x18e0-0x18ff 0x2000-0xa0ff 0xa400-0xa4ff [ 13.107526] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff] [ 13.107531] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding 0xa0000-0xbffff [ 13.107546] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff] [ 13.107550] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean. [ 13.107555] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff] [ 13.107559] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean. [ 13.107564] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xfebfffff] [ 13.107568] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xfebfffff: excluding 0xc0000000-0xc07fffff 0xc4000000-0xc7ffffff 0xd8000000-0xe47fffff 0xe8000000-0xee7fffff 0xf0000000-0xf3ffffff 0xfe800000-0xfeffffff [ 13.107687] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xfed40000-0xfed40fff] [ 13.107690] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfed40000-0xfed40fff: excluding 0xfed40000-0xfed41fff [ 13.126470] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 13.126473] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 13.126476] thinkpad_acpi: ThinkPad BIOS 79ETE6WW (2.26 ), EC 79HT50WW-1.07 [ 13.126478] thinkpad_acpi: Lenovo ThinkPad T60, model 2007VC8 [ 13.127070] thinkpad_acpi: radio switch found; radios are enabled [ 13.127182] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 13.127185] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 13.134783] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 13.135263] Registered led device: tpacpi::thinklight [ 13.135504] Registered led device: tpacpi::power [ 13.135525] Registered led device: tpacpi::standby [ 13.135541] Registered led device: tpacpi::thinkvantage [ 13.138101] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 13.138192] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 13.140903] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 13.352454] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0 [ 13.352459] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 13.394122] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 13.452301] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 13.452305] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 13.452439] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.452454] iwl3945 0000:03:00.0: setting latency timer to 64 [ 13.460945] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 [ 13.465882] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f [ 13.467416] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff [ 13.469061] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff [ 13.469129] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 13.469194] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 13.469264] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 13.508754] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 13.508758] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 13.508903] iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X [ 13.590288] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 13.689824] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.689829] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 13.689898] HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X [ 13.689935] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.771713] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 14.272085] EXT3-fs (dm-12): using internal journal [ 18.863934] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 19.096023] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 20.805639] usb 2-5: USB disconnect, address 2 [ 22.247194] Adding 3145208k swap on /dev/mapper/swap0. Priority:-1 extents:1 across:3145208k [ 33.161570] kjournald starting. Commit interval 5 seconds [ 33.178321] EXT3-fs (dm-14): using internal journal [ 33.178327] EXT3-fs (dm-14): mounted filesystem with writeback data mode [ 33.209284] kjournald starting. Commit interval 5 seconds [ 33.236197] EXT3-fs (dm-17): using internal journal [ 33.236204] EXT3-fs (dm-17): mounted filesystem with writeback data mode [ 33.328798] kjournald starting. Commit interval 5 seconds [ 33.329055] EXT3-fs (dm-15): using internal journal [ 33.329060] EXT3-fs (dm-15): mounted filesystem with writeback data mode [ 33.381481] kjournald starting. Commit interval 5 seconds [ 33.381722] EXT3-fs (dm-16): using internal journal [ 33.381726] EXT3-fs (dm-16): mounted filesystem with writeback data mode [ 33.455836] kjournald starting. Commit interval 5 seconds [ 33.456067] EXT3-fs (dm-18): using internal journal [ 33.456071] EXT3-fs (dm-18): mounted filesystem with writeback data mode [ 33.488303] kjournald starting. Commit interval 5 seconds [ 33.488541] EXT3-fs (dm-20): using internal journal [ 33.488546] EXT3-fs (dm-20): mounted filesystem with writeback data mode [ 33.532337] kjournald starting. Commit interval 5 seconds [ 33.532595] EXT3-fs (dm-19): using internal journal [ 33.532600] EXT3-fs (dm-19): mounted filesystem with writeback data mode [ 37.140935] NET: Registered protocol family 10 [ 37.141485] lo: Disabled Privacy Extensions [ 37.448469] Bridge firewalling registered [ 38.784920] 802.1Q VLAN Support v1.8 Ben Greear [ 38.784924] All bugs added by David S. Miller [ 39.849498] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 39.904216] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 39.904760] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.191010] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 40.238930] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 40.325080] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 41.822705] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 41.822709] 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 41.822986] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.017500] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 42.017504] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 42.017506] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 42.017508] vboxdrv: the usage of hardware performance counters by [ 42.017509] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 42.017514] vboxdrv: Found 2 processor cores. [ 42.017598] vboxdrv: fAsync=1 offMin=0x8a9e4 offMax=0x8a9e4 [ 42.017661] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 42.017663] vboxdrv: Successfully loaded version 3.2.6_OSE (interface 0x00140001). [ 44.069208] ip_tables: (C) 2000-2006 Netfilter Core Team [ 44.123908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 44.124123] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 44.124126] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 44.124128] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 46.810862] Bluetooth: L2CAP ver 2.14 [ 46.810865] Bluetooth: L2CAP socket layer initialized [ 47.187334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.187338] Bluetooth: BNEP filters: protocol multicast [ 47.207756] Bluetooth: SCO (Voice Link) ver 0.6 [ 47.207759] Bluetooth: SCO socket layer initialized [ 47.552041] br0: no IPv6 routers present [ 47.668350] Bluetooth: RFCOMM TTY layer initialized [ 47.668356] Bluetooth: RFCOMM socket layer initialized [ 47.668359] Bluetooth: RFCOMM ver 1.11 [ 49.332627] lp: driver loaded but no devices found [ 49.552630] ppdev: user-space parallel port driver [ 51.984045] eth0: no IPv6 routers present [ 52.433070] device eth0 entered promiscuous mode [ 68.095028] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 83.852628] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 84.117958] device eth0 left promiscuous mode [ 84.137558] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 84.192247] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 84.192961] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 84.414159] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 86.818732] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 86.818739] 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 86.819230] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 89.373315] wlan0: authenticate with 00:24:fe:01:97:12 (try 1) [ 89.378150] wlan0: authenticated [ 89.378747] wlan0: associate with 00:24:fe:01:97:12 (try 1) [ 89.381931] wlan0: RX AssocResp from 00:24:fe:01:97:12 (capab=0x431 status=0 aid=3) [ 89.381938] wlan0: associated [ 89.383699] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 97.496054] eth0: no IPv6 routers present [ 100.108053] wlan0: no IPv6 routers present [ 365.914822] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 365.916906] input: Logitech Elite Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:11/input10 [ 365.917244] generic-bluetooth 0005:046D:B301.0002: input,hidraw1: BLUETOOTH HID v23.02 Keyboard [Logitech Elite Keyboard] on 00:16:CF:E2:32:E8 [ 428.014455] input: Logitech MX900 Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:12/input11 [ 428.014650] generic-bluetooth 0005:046D:B001.0003: input,hidraw2: BLUETOOTH HID v22.00 Mouse [Logitech MX900 Mouse] on 00:16:CF:E2:32:E8 [ 481.548066] wlan0: deauthenticating from 00:24:fe:01:97:12 by local choice (reason=3) [ 481.596063] cfg80211: Calling CRDA to update world regulatory domain [ 481.693087] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 482.016409] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 482.074538] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 482.075276] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 482.272438] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 482.332208] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 482.332878] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 484.382698] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 484.382703] 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 484.382982] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 495.340033] eth0: no IPv6 routers present [ 670.979820] tun: Universal TUN/TAP device driver, 1.6 [ 670.979827] tun: (C) 1999-2004 Max Krasnyansky [ 670.980928] tun0: Disabled Privacy Extensions