| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201007312255.51139.linux@rainbow-software.org>
Date: Sat, 31 Jul 2010 22:55:49 +0200
From: Ondrej Zary <linux@...nbow-software.org>
To: "Russell King - ARM Linux" <linux@....linux.org.uk>
Cc: linux-fbdev@...r.kernel.org,
Kernel development list <linux-kernel@...r.kernel.org>
Subject: [PATCH 3/3] cyber2000fb: add I2C support
Add I2C support for the DDC bus to cyber2000fb driver. This is only bus
support, driver does not use EDID.
Tested on two different CyberPro 2000 cards with i2cdetect and decode-edid.
Signed-off-by: Ondrej Zary <linux@...nbow-software.org>
diff -urp linux-2.6.35-rc3-/drivers/video/cyber2000fb.c linux-2.6.35-rc3/drivers/video/cyber2000fb.c
--- linux-2.6.35-rc3-/drivers/video/cyber2000fb.c 2010-07-31 21:58:35.000000000 +0200
+++ linux-2.6.35-rc3/drivers/video/cyber2000fb.c 2010-07-31 22:49:55.000000000 +0200
@@ -48,6 +48,10 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/i2c-algo-bit.h>
+
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -88,6 +92,11 @@ struct cfb_info {
u_char ramdac_powerdown;
u32 pseudo_palette[16];
+#ifdef CONFIG_FB_CYBER2000_I2C
+ bool i2c_registered;
+ struct i2c_adapter i2c_adapter;
+ struct i2c_algo_bit_data i2c_algo;
+#endif
};
static char *default_font = "Acorn8x8";
@@ -1145,6 +1154,95 @@ void cyber2000fb_detach(int idx)
}
EXPORT_SYMBOL(cyber2000fb_detach);
+#ifdef CONFIG_FB_CYBER2000_I2C
+
+#define DDC_REG 0xb0
+#define DDC_SCL_OUT (1 << 0)
+#define DDC_SDA_OUT (1 << 4)
+#define DDC_SCL_IN (1 << 2)
+#define DDC_SDA_IN (1 << 6)
+
+static void cyber2000fb_enable_ddc(char enable, struct cfb_info *cfb)
+{
+ cyber2000fb_writew(((enable & 0x01) << 8) | 0xbf, 0x3ce, cfb);
+}
+
+static void cyber2000fb_setscl(void *data, int val)
+{
+ struct cfb_info *cfb = data;
+ unsigned char reg;
+
+ cyber2000fb_enable_ddc(1, cfb);
+ reg = cyber2000_grphr(DDC_REG, cfb);
+ if (!val) /* bit is inverted */
+ reg |= DDC_SCL_OUT;
+ else
+ reg &= ~DDC_SCL_OUT;
+ cyber2000_grphw(DDC_REG, reg, cfb);
+ cyber2000fb_enable_ddc(0, cfb);
+}
+
+static void cyber2000fb_setsda(void *data, int val)
+{
+ struct cfb_info *cfb = data;
+ unsigned char reg;
+
+ cyber2000fb_enable_ddc(1, cfb);
+ reg = cyber2000_grphr(DDC_REG, cfb);
+ if (!val) /* bit is inverted */
+ reg |= DDC_SDA_OUT;
+ else
+ reg &= ~DDC_SDA_OUT;
+ cyber2000_grphw(DDC_REG, reg, cfb);
+ cyber2000fb_enable_ddc(0, cfb);
+}
+
+static int cyber2000fb_getscl(void *data)
+{
+ struct cfb_info *cfb = data;
+ int retval;
+
+ cyber2000fb_enable_ddc(1, cfb);
+ retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN);
+ cyber2000fb_enable_ddc(0, cfb);
+
+ return retval;
+}
+
+static int cyber2000fb_getsda(void *data)
+{
+ struct cfb_info *cfb = data;
+ int retval;
+
+ cyber2000fb_enable_ddc(1, cfb);
+ retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN);
+ cyber2000fb_enable_ddc(0, cfb);
+
+ return retval;
+}
+
+static int __devinit cyber2000fb_setup_ddc_bus(struct cfb_info *cfb)
+{
+ strlcpy(cfb->i2c_adapter.name, cfb->fb.fix.id,
+ sizeof(cfb->i2c_adapter.name));
+ cfb->i2c_adapter.owner = THIS_MODULE;
+ cfb->i2c_adapter.class = I2C_CLASS_DDC;
+ cfb->i2c_adapter.algo_data = &cfb->i2c_algo;
+ cfb->i2c_adapter.dev.parent = &cfb->dev->dev;
+ cfb->i2c_algo.setsda = cyber2000fb_setsda;
+ cfb->i2c_algo.setscl = cyber2000fb_setscl;
+ cfb->i2c_algo.getsda = cyber2000fb_getsda;
+ cfb->i2c_algo.getscl = cyber2000fb_getscl;
+ cfb->i2c_algo.udelay = 10;
+ cfb->i2c_algo.timeout = 20;
+ cfb->i2c_algo.data = cfb;
+
+ i2c_set_adapdata(&cfb->i2c_adapter, cfb);
+
+ return i2c_bit_add_bus(&cfb->i2c_adapter);
+}
+#endif /* CONFIG_FB_CYBER2000_I2C */
+
/*
* These parameters give
* 640x480, hsync 31.5kHz, vsync 60Hz
@@ -1373,6 +1471,11 @@ static int __devinit cyberpro_common_pro
cfb->fb.fix.mmio_len = MMIO_SIZE;
cfb->fb.screen_base = cfb->region;
+#ifdef CONFIG_FB_CYBER2000_I2C
+ if (cyber2000fb_setup_ddc_bus(cfb) == 0)
+ cfb->i2c_registered = true;
+#endif
+
err = -EINVAL;
if (!fb_find_mode(&cfb->fb.var, &cfb->fb, mode_option, NULL, 0,
&cyber2000fb_default_mode, 8)) {
@@ -1410,6 +1513,10 @@ static int __devinit cyberpro_common_pro
err = register_framebuffer(&cfb->fb);
failed:
+#ifdef CONFIG_FB_CYBER2000_I2C
+ if (err && cfb->i2c_registered)
+ i2c_del_adapter(&cfb->i2c_adapter);
+#endif
return err;
}
@@ -1661,6 +1768,10 @@ static void __devexit cyberpro_pci_remov
printk(KERN_WARNING "%s: danger Will Robinson, "
"danger danger! Oopsen imminent!\n",
cfb->fb.fix.id);
+#ifdef CONFIG_FB_CYBER2000_I2C
+ if (cfb->i2c_registered)
+ i2c_del_adapter(&cfb->i2c_adapter);
+#endif
iounmap(cfb->region);
cyberpro_free_fb_info(cfb);
diff -urp linux-2.6.35-rc3-/drivers/video/Kconfig linux-2.6.35-rc3/drivers/video/Kconfig
--- linux-2.6.35-rc3-/drivers/video/Kconfig 2010-07-31 22:00:23.000000000 +0200
+++ linux-2.6.35-rc3/drivers/video/Kconfig 2010-07-31 22:52:11.000000000 +0200
@@ -422,6 +422,15 @@ config FB_CYBER2000
Say Y if you have a NetWinder or a graphics card containing this
device, otherwise say N.
+config FB_CYBER2000_I2C
+ bool "DDC/I2C for CyberPro support"
+ depends on FB_CYBER2000
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC support for your CyberPro graphics
+ card. This is only I2C bus support, driver does not use EDID.
+
config FB_APOLLO
bool
depends on (FB = y) && APOLLO
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists