[ 0.000000] Linux version 2.6.35-cableguy (root@cableguy) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Mon Aug 2 18:51:28 CEST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003eff0000 (usable) [ 0.000000] BIOS-e820: 000000003eff0000 - 000000003eff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003eff3000 - 000000003f000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3eff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03F000000 mask FFF000000 uncachable [ 0.000000] 2 base 0E4000000 mask FFC000000 write-combining [ 0.000000] 3 base 0E8000000 mask FFF000000 write-combining [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003eff0000 (usable) [ 0.000000] modified: 000000003eff0000 - 000000003eff3000 (ACPI NVS) [ 0.000000] modified: 000000003eff3000 - 000000003f000000 (ACPI data) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] ACPI: RSDP 000f6a20 00014 (v00 CLE266) [ 0.000000] ACPI: RSDT 3eff3000 00028 (v01 CLE266 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3eff3040 00074 (v01 CLE266 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3eff30c0 0407B (v01 CLE266 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3eff0000 00040 [ 0.000000] 119MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003eff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003eff0 [ 0.000000] On node 0 totalpages: 257919 [ 0.000000] free_area_init_node: node 0, pgdat c153a724, node_mem_map c15e4200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 240 pages used for memmap [ 0.000000] HighMem zone: 30466 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 3f000000 (gap: 3f000000:c0ff0000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255903 [ 0.000000] Kernel command line: root=/dev/sda1 libata.force=2.00:udma4,2.01:udma2 fastboot profile=2 panic=30 [ 0.000000] kernel profiling enabled (shift: 2) [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (25 early reservations) [ 0.000000] #0 [0001000000 - 00015dbeb4] TEXT DATA BSS [ 0.000000] #1 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #2 [00015dc000 - 00015e208a] BRK [ 0.000000] #3 [0000010000 - 0000011000] PGTABLE [ 0.000000] #4 [00015e3000 - 00015e4000] BOOTMEM [ 0.000000] #5 [00015e4000 - 0001dc4000] BOOTMEM [ 0.000000] #6 [00015dbec0 - 00015dbec4] BOOTMEM [ 0.000000] #7 [00015dbf00 - 00015dbf80] BOOTMEM [ 0.000000] #8 [00015dbf80 - 00015dbfd4] BOOTMEM [ 0.000000] #9 [0001dc4000 - 0001dc6000] BOOTMEM [ 0.000000] #10 [00015e20c0 - 00015e20cc] BOOTMEM [ 0.000000] #11 [00015e2100 - 00015e2500] BOOTMEM [ 0.000000] #12 [00015e2500 - 00015e25e0] BOOTMEM [ 0.000000] #13 [00015e2600 - 00015e2640] BOOTMEM [ 0.000000] #14 [00015e2640 - 00015e2680] BOOTMEM [ 0.000000] #15 [00015e2680 - 00015e26c0] BOOTMEM [ 0.000000] #16 [00015e26c0 - 00015e2700] BOOTMEM [ 0.000000] #17 [00015e2700 - 00015e2740] BOOTMEM [ 0.000000] #18 [00015e2740 - 00015e2780] BOOTMEM [ 0.000000] #19 [00015e2780 - 00015e27c0] BOOTMEM [ 0.000000] #20 [00015e27c0 - 00015e280e] BOOTMEM [ 0.000000] #21 [00015e2840 - 00015e288e] BOOTMEM [ 0.000000] #22 [0001dc6000 - 0001dca000] BOOTMEM [ 0.000000] #23 [0001dca000 - 0001e4a000] BOOTMEM [ 0.000000] #24 [0001e4a000 - 0001e8a000] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0003eff0) [ 0.000000] Memory: 1016784k/1032128k available (3725k kernel code, 14892k reserved, 1662k data, 312k init, 122824k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1544000 - 0xc1592000 ( 312 kB) [ 0.000000] .data : 0xc13a37e8 - 0xc15432b4 (1662 kB) [ 0.000000] .text : 0xc1000000 - 0xc13a37e8 (3725 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:288 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1002.234 MHz processor. [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2004.46 BogoMIPS (lpj=4008936) [ 0.008318] pid_max: default: 32768 minimum: 301 [ 0.008515] Security Framework initialized [ 0.008703] Mount-cache hash table entries: 512 [ 0.009262] Performance Events: [ 0.009310] CPU: Centaur VIA Nehemiah stepping 08 [ 0.012836] ACPI: Core revision 20100428 [ 0.022392] ACPI: setting ELCR to 0200 (from 0ea0) [ 0.025329] NET: Registered protocol family 16 [ 0.026245] ACPI: bus type pci registered [ 0.032808] PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=3 [ 0.032965] PCI: Using configuration type 1 for base access [ 0.051052] bio: create slab at 0 [ 0.053185] ACPI: EC: Look up EC in DSDT [ 0.065052] ACPI: Interpreter enabled [ 0.065213] ACPI: (supports S0 S5) [ 0.065459] ACPI: Using PIC for interrupt routing [ 0.078679] ACPI: No dock devices found. [ 0.078846] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.079421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.080316] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.080329] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.080341] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.080353] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.080366] pci_root PNP0A03:00: host bridge window [mem 0x3f000000-0xffefffff] (ignored) [ 0.080415] pci 0000:00:00.0: reg 10: [mem 0xe4000000-0xe7ffffff pref] [ 0.080537] pci 0000:00:01.0: supports D1 [ 0.080588] pci 0000:00:08.0: reg 10: [io 0xd000-0xd0ff] [ 0.080604] pci 0000:00:08.0: reg 14: [mem 0xee01f000-0xee01f0ff] [ 0.080638] pci 0000:00:08.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.080666] pci 0000:00:08.0: supports D1 D2 [ 0.080675] pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold [ 0.080686] pci 0000:00:08.0: PME# disabled [ 0.080729] pci 0000:00:09.0: reg 10: [io 0xd100-0xd1ff] [ 0.080745] pci 0000:00:09.0: reg 14: [mem 0xee010000-0xee0100ff] [ 0.080779] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.080806] pci 0000:00:09.0: supports D1 D2 [ 0.080815] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold [ 0.080826] pci 0000:00:09.0: PME# disabled [ 0.080869] pci 0000:00:0a.0: reg 10: [io 0xd200-0xd2ff] [ 0.080885] pci 0000:00:0a.0: reg 14: [mem 0xee011000-0xee0110ff] [ 0.080919] pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.080946] pci 0000:00:0a.0: supports D1 D2 [ 0.080954] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold [ 0.080965] pci 0000:00:0a.0: PME# disabled [ 0.081008] pci 0000:00:0b.0: reg 10: [io 0xd300-0xd3ff] [ 0.081024] pci 0000:00:0b.0: reg 14: [mem 0xee012000-0xee0120ff] [ 0.081058] pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.081085] pci 0000:00:0b.0: supports D1 D2 [ 0.081094] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.081104] pci 0000:00:0b.0: PME# disabled [ 0.081153] pci 0000:00:0c.0: reg 10: [mem 0xee013000-0xee013fff] [ 0.081180] pci 0000:00:0c.0: supports D1 D2 [ 0.081189] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081200] pci 0000:00:0c.0: PME# disabled [ 0.081243] pci 0000:00:0c.1: reg 10: [mem 0xee018000-0xee018fff] [ 0.081270] pci 0000:00:0c.1: supports D1 D2 [ 0.081279] pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081290] pci 0000:00:0c.1: PME# disabled [ 0.081335] pci 0000:00:0d.0: reg 10: [mem 0xee01d000-0xee01d1ff] [ 0.081431] pci 0000:00:10.0: reg 20: [io 0xdc00-0xdc1f] [ 0.081466] pci 0000:00:10.0: supports D1 D2 [ 0.081475] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081486] pci 0000:00:10.0: PME# disabled [ 0.081547] pci 0000:00:10.1: reg 20: [io 0xdd00-0xdd1f] [ 0.081582] pci 0000:00:10.1: supports D1 D2 [ 0.081591] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081602] pci 0000:00:10.1: PME# disabled [ 0.081663] pci 0000:00:10.2: reg 20: [io 0xde00-0xde1f] [ 0.081698] pci 0000:00:10.2: supports D1 D2 [ 0.081707] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081718] pci 0000:00:10.2: PME# disabled [ 0.081762] pci 0000:00:10.3: reg 10: [mem 0xee01e000-0xee01e0ff] [ 0.081816] pci 0000:00:10.3: supports D1 D2 [ 0.081825] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081836] pci 0000:00:10.3: PME# disabled [ 0.081922] pci 0000:00:11.0: quirk: [io 0x4000-0x407f] claimed by vt8235 PM [ 0.082088] pci 0000:00:11.0: quirk: [io 0x5000-0x500f] claimed by vt8235 SMB [ 0.082418] pci 0000:00:11.1: reg 20: [io 0xdf00-0xdf0f] [ 0.082498] pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff] [ 0.082553] pci 0000:00:11.5: supports D1 D2 [ 0.082648] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xebffffff pref] [ 0.082663] pci 0000:01:00.0: reg 14: [mem 0xec000000-0xecffffff] [ 0.082692] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.082718] pci 0000:01:00.0: supports D1 D2 [ 0.082764] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.082921] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.082935] pci 0000:00:01.0: bridge window [mem 0xec000000-0xedffffff] [ 0.082949] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xebffffff pref] [ 0.083045] pci_bus 0000:00: on NUMA node 0 [ 0.083062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.153426] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *7 10 11 12) [ 0.154354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 [ 0.155312] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) [ 0.156278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12) [ 0.157299] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.157561] vgaarb: loaded [ 0.158133] SCSI subsystem initialized [ 0.158385] libata version 3.00 loaded. [ 0.158658] usbcore: registered new interface driver usbfs [ 0.158909] usbcore: registered new interface driver hub [ 0.159163] usbcore: registered new device driver usb [ 0.159874] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.160154] PCI: Using ACPI for IRQ routing [ 0.160350] PCI: pci_cache_line_size set to 32 bytes [ 0.160481] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.160493] reserve RAM buffer: 000000003eff0000 - 000000003fffffff [ 0.160917] Switching to clocksource tsc [ 0.161137] pnp: PnP ACPI init [ 0.161306] ACPI: bus type pnp registered [ 0.163906] ERROR: Unable to locate IOAPIC for GSI 8 [ 0.164373] ERROR: Unable to locate IOAPIC for GSI 13 [ 0.165815] ERROR: Unable to locate IOAPIC for GSI 4 [ 0.168086] pnp: PnP ACPI: found 9 devices [ 0.168240] ACPI: ACPI bus type pnp unregistered [ 0.168427] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.168589] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.168749] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.168908] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.169069] system 00:00: [mem 0x3eff0000-0x3effffff] could not be reserved [ 0.169231] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 0.169391] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.169552] system 00:00: [mem 0x00100000-0x3efeffff] could not be reserved [ 0.169712] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.169872] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.170045] system 00:02: [io 0x4000-0x407f] has been reserved [ 0.170203] system 00:02: [io 0x5000-0x500f] has been reserved [ 0.170371] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.206308] pci 0000:00:0c.0: BAR 9: assigned [mem 0x40000000-0x43ffffff pref] [ 0.206578] pci 0000:00:0c.0: BAR 10: assigned [mem 0x44000000-0x47ffffff] [ 0.206740] pci 0000:00:0c.1: BAR 9: assigned [mem 0x48000000-0x4bffffff pref] [ 0.207016] pci 0000:00:0c.1: BAR 10: assigned [mem 0x4c000000-0x4fffffff] [ 0.207178] pci 0000:00:08.0: BAR 6: assigned [mem 0x50000000-0x5000ffff pref] [ 0.207440] pci 0000:00:09.0: BAR 6: assigned [mem 0x50010000-0x5001ffff pref] [ 0.207703] pci 0000:00:0a.0: BAR 6: assigned [mem 0x50020000-0x5002ffff pref] [ 0.207966] pci 0000:00:0b.0: BAR 6: assigned [mem 0x50030000-0x5003ffff pref] [ 0.208228] pci 0000:00:0c.0: BAR 7: assigned [io 0x1000-0x10ff] [ 0.208386] pci 0000:00:0c.0: BAR 8: assigned [io 0x1400-0x14ff] [ 0.208544] pci 0000:00:0c.1: BAR 7: assigned [io 0x1800-0x18ff] [ 0.208703] pci 0000:00:0c.1: BAR 8: assigned [io 0x1c00-0x1cff] [ 0.211657] pci 0000:01:00.0: BAR 6: assigned [mem 0xed000000-0xed00ffff pref] [ 0.211917] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.212070] pci 0000:00:01.0: bridge window [io disabled] [ 0.212229] pci 0000:00:01.0: bridge window [mem 0xec000000-0xedffffff] [ 0.212390] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xebffffff pref] [ 0.212653] pci 0000:00:0c.0: CardBus bridge to [bus 02-05] [ 0.212809] pci 0000:00:0c.0: bridge window [io 0x1000-0x10ff] [ 0.212967] pci 0000:00:0c.0: bridge window [io 0x1400-0x14ff] [ 0.213126] pci 0000:00:0c.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 0.213387] pci 0000:00:0c.0: bridge window [mem 0x44000000-0x47ffffff] [ 0.213547] pci 0000:00:0c.1: CardBus bridge to [bus 06-09] [ 0.213702] pci 0000:00:0c.1: bridge window [io 0x1800-0x18ff] [ 0.213859] pci 0000:00:0c.1: bridge window [io 0x1c00-0x1cff] [ 0.214017] pci 0000:00:0c.1: bridge window [mem 0x48000000-0x4bffffff pref] [ 0.214278] pci 0000:00:0c.1: bridge window [mem 0x4c000000-0x4fffffff] [ 0.214452] pci 0000:00:01.0: setting latency timer to 64 [ 0.215543] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 [ 0.215698] PCI: setting IRQ 7 as level-triggered [ 0.215715] pci 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 0.216891] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.217044] PCI: setting IRQ 11 as level-triggered [ 0.217060] pci 0000:00:0c.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.217328] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.217339] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.217352] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff] [ 0.217364] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xebffffff pref] [ 0.217376] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff] [ 0.217387] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff] [ 0.217398] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref] [ 0.217410] pci_bus 0000:02: resource 3 [mem 0x44000000-0x47ffffff] [ 0.217421] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff] [ 0.217432] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff] [ 0.217443] pci_bus 0000:06: resource 2 [mem 0x48000000-0x4bffffff pref] [ 0.217455] pci_bus 0000:06: resource 3 [mem 0x4c000000-0x4fffffff] [ 0.217569] NET: Registered protocol family 2 [ 0.217901] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.219290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.224980] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.226468] TCP: Hash tables configured (established 131072 bind 65536) [ 0.226629] TCP reno registered [ 0.226784] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.227003] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.227363] NET: Registered protocol family 1 [ 0.227739] RPC: Registered udp transport module. [ 0.227890] RPC: Registered tcp transport module. [ 0.228042] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.228226] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.228541] pci 0000:01:00.0: Boot video device [ 0.228551] PCI: CLS 32 bytes, default 32 [ 0.229332] Scanning for low memory corruption every 60 seconds [ 0.230410] highmem bounce pool size: 64 pages [ 0.241823] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.242965] Slow work thread pool: Starting up [ 0.243195] Slow work thread pool: Ready [ 0.243344] NTFS driver 2.1.29 [Flags: R/W]. [ 0.244033] msgmni has been set to 1746 [ 0.244589] alg: No test for cipher_null (cipher_null-generic) [ 0.244791] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.244987] alg: No test for digest_null (digest_null-generic) [ 0.245179] alg: No test for compress_null (compress_null-generic) [ 0.253983] alg: No test for stdrng (krng) [ 0.254199] io scheduler noop registered [ 0.254349] io scheduler deadline registered [ 0.254627] io scheduler cfq registered (default) [ 0.255224] vt8623fb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 0.291065] vt8623fb 0000:01:00.0: memory size detection failed (0 10), suppose 16 MB [ 0.291631] fb0: VIA VT8623 on 0000:01:00.0, 16 MB RAM [ 0.292662] input: Power Button as /class/input/input0 [ 0.292821] ACPI: Power Button [PWRB] [ 0.293232] input: Sleep Button as /class/input/input1 [ 0.293394] ACPI: Sleep Button [SLPB] [ 0.293835] input: Power Button as /class/input/input2 [ 0.293989] ACPI: Power Button [PWRF] [ 0.294224] ACPI: acpi_idle registered with cpuidle [ 0.294361] Marking TSC unstable due to TSC halts in idle [ 0.294664] Switching to clocksource acpi_pm [ 0.397089] Real Time Clock Driver v1.12b [ 0.397446] Non-volatile memory driver v1.3 [ 0.397597] VIA RNG detected [ 0.397920] Linux agpgart interface v0.103 [ 0.398108] agpgart: Detected VIA CLE266 chipset [ 0.403074] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe4000000 [ 0.403494] [drm] Initialized drm 1.1.0 20060810 [ 0.404534] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 0.404735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.405165] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.408289] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.411370] loop: module loaded [ 0.412207] pata_via 0000:00:11.1: version 0.3.4 [ 0.412255] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 0.412525] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 7 [ 0.413030] scsi0 : pata_via [ 0.413541] scsi1 : pata_via [ 0.420719] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdf00 irq 14 [ 0.420884] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdf08 irq 15 [ 0.421549] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 0.421858] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.422050] 8139too 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 0.423336] 8139too 0000:00:08.0: eth0: RealTek RTL8139 at 0xf801e000, 00:40:48:b2:40:3f, IRQ 7 [ 0.423649] 8139too 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.424990] 8139too 0000:00:09.0: eth1: RealTek RTL8139 at 0xf8022000, 00:40:48:b2:40:3e, IRQ 11 [ 0.426367] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.426525] PCI: setting IRQ 10 as level-triggered [ 0.426542] 8139too 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.427948] 8139too 0000:00:0a.0: eth2: RealTek RTL8139 at 0xf8026000, 00:40:48:b2:40:3d, IRQ 10 [ 0.429394] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.429557] 8139too 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.431004] 8139too 0000:00:0b.0: eth3: RealTek RTL8139 at 0xf802a000, 00:40:48:b2:40:3c, IRQ 11 [ 0.431394] tun: Universal TUN/TAP device driver, 1.6 [ 0.431546] tun: (C) 1999-2004 Max Krasnyansky [ 0.432289] yenta_cardbus 0000:00:0c.0: CardBus bridge found [3412:7856] [ 0.764419] ata2.00: CFA: TRANSCEND, 20091215, max UDMA/66 [ 0.764580] ata2.00: 31293360 sectors, multi 0: LBA [ 0.807808] ata2.01: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100 [ 0.807968] ata2.01: 625142448 sectors, multi 16: LBA48 [ 0.808202] ata2.00: FORCE: xfer_mask set to udma4 [ 0.808355] ata2.01: FORCE: xfer_mask set to udma2 [ 0.824325] ata2.00: configured for UDMA/66 [ 0.840853] ata2.01: configured for UDMA/33 [ 0.848328] ata2.00: FORCE: xfer_mask set to udma4 [ 0.848482] ata2.01: FORCE: xfer_mask set to udma2 [ 0.856316] ata2.00: configured for UDMA/66 [ 0.864870] ata2.01: configured for UDMA/33 [ 0.865022] ata2: EH complete [ 0.865418] scsi 1:0:0:0: Direct-Access ATA TRANSCEND 2009 PQ: 0 ANSI: 5 [ 0.866243] sd 1:0:0:0: [sda] 31293360 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 0.866601] sd 1:0:0:0: [sda] Write Protect is off [ 0.866757] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.866806] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 0.867358] sda: sda1 [ 0.868594] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 0.868977] scsi 1:0:1:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5 [ 0.870221] sd 1:0:0:0: [sda] Attached SCSI disk [ 0.870435] sd 1:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.870779] sd 1:0:1:0: [sdb] Write Protect is off [ 0.870935] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.870981] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.871525] sdb: [ 0.872302] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 0.879797] sdb1 sdb2 sdb3 sdb4 [ 0.881191] sd 1:0:1:0: [sdb] Attached SCSI disk [ 1.008710] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0008, PCI irq 7 [ 1.008869] yenta_cardbus 0000:00:0c.0: Socket status: 30000006 [ 1.009474] yenta_cardbus 0000:00:0c.1: CardBus bridge found [3412:7856] [ 1.136602] yenta_cardbus 0000:00:0c.1: ISA IRQ mask 0x0008, PCI irq 11 [ 1.136761] yenta_cardbus 0000:00:0c.1: Socket status: 30000006 [ 1.137330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.137554] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.137846] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 1.138048] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 1.138414] ehci_hcd 0000:00:10.3: irq 11, io mem 0xee01e000 [ 1.148041] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 1.148996] hub 1-0:1.0: USB hub found [ 1.149159] hub 1-0:1.0: 6 ports detected [ 1.149528] uhci_hcd: USB Universal Host Controller Interface driver [ 1.149852] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 1.150129] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.150304] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.150600] uhci_hcd 0000:00:10.0: irq 7, io base 0x0000dc00 [ 1.151622] hub 2-0:1.0: USB hub found [ 1.151787] hub 2-0:1.0: 2 ports detected [ 1.152148] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.152414] uhci_hcd 0000:00:10.1: VIA VLink IRQ fixup, from 5 to 11 [ 1.152597] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.152785] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.153079] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000dd00 [ 1.154061] hub 3-0:1.0: USB hub found [ 1.154225] hub 3-0:1.0: 2 ports detected [ 1.154524] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 1.154801] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.154972] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.158122] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000de00 [ 1.159099] hub 4-0:1.0: USB hub found [ 1.159260] hub 4-0:1.0: 2 ports detected [ 1.159630] Initializing USB Mass Storage driver... [ 1.159959] usbcore: registered new interface driver usb-storage [ 1.160177] USB Mass Storage support registered. [ 1.160679] PNP: No PS/2 controller found. Probing ports directly. [ 1.161365] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.161527] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.162592] mice: PS/2 mouse device common for all mice [ 1.163344] input: PC Speaker as /class/input/input3 [ 1.163577] i2c /dev entries driver [ 1.164128] ACPI: resource vt596_smbus [io 0x5000-0x5007] conflicts with ACPI region SM06 [??? 0x00005006 flags 0x36] [ 1.164397] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.164821] Linux video capture interface: v2.00 [ 1.165060] vt1211: Found VT1211 chip at 0x6000, revision 2 [ 1.166022] cpuidle: using governor ladder [ 1.166596] cpuidle: using governor menu [ 1.169515] usbcore: registered new interface driver hiddev [ 1.169772] usbcore: registered new interface driver usbhid [ 1.169925] usbhid: USB HID core driver [ 1.171441] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 1.171862] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 1.693036] ALSA device list: [ 1.693197] #0: VIA 8235 with VIA1612A at 0xe000, irq 10 [ 1.693352] oprofile: using timer interrupt. [ 1.693794] GACT probability on [ 1.693947] Mirror/redirect action on [ 1.694096] Simple TC action Loaded [ 1.695173] netem: version 1.2 [ 1.695324] u32 classifier [ 1.695469] Performance counters on [ 1.695616] input device check on [ 1.695763] Actions configured [ 1.695916] Netfilter messages via NETLINK v0.30. [ 1.696237] nf_conntrack version 0.5.0 (15887 buckets, 63548 max) [ 1.697023] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1.697289] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1.697547] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1.697914] ctnetlink v0.93: registering with nfnetlink. [ 1.698154] xt_time: kernel timezone is -0000 [ 1.699351] IPv4 over IPv4 tunneling driver [ 1.700759] GRE over IPv4 tunneling driver [ 1.703214] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.703537] arp_tables: (C) 2002 David S. Miller [ 1.703724] TCP cubic registered [ 1.703872] Initializing XFRM netlink socket [ 1.705131] NET: Registered protocol family 10 [ 1.707071] lo: Disabled Privacy Extensions [ 1.713413] tunl0: Disabled Privacy Extensions [ 1.716662] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.717088] IPv6 over IPv4 tunneling driver [ 1.719084] sit0: Disabled Privacy Extensions [ 1.722551] ip6tnl0: Disabled Privacy Extensions [ 1.724252] NET: Registered protocol family 17 [ 1.724441] NET: Registered protocol family 15 [ 1.724861] Bridge firewalling registered [ 1.725018] Ebtables v2.0 registered [ 1.725230] Using IPI Shortcut mode [ 1.726314] registered taskstats version 1 [ 1.728788] EXT3-fs: barriers not enabled [ 1.729292] kjournald starting. Commit interval 5 seconds [ 1.729489] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 1.729738] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 1.729941] Freeing unused kernel memory: 312k freed [ 4.418536] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xf0000-0xfffff [ 4.419159] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 4.419561] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean. [ 4.421045] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xf0000-0xfffff [ 4.421561] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 4.421960] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 8.295883] saa7146: register extension 'budget_av'. [ 8.296161] budget_av 0000:00:0d.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 8.296507] saa7146: found saa7146 @ mem fc156000 (revision 1, irq 11) (0x153b,0x1156). [ 8.296819] saa7146 (0): dma buffer size 1347584 [ 8.296970] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C) [ 8.334430] adapter failed MAC signature check [ 8.334593] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 8.600496] KNC1-0: MAC addr = 00:0a:ac:01:da:a5 [ 8.740807] TDA10021: i2c-addr = 0x0c, id = 0x7c [ 8.740980] DVB: registering adapter 0 frontend 0 (Philips TDA10021 DVB-C)... [ 8.742865] budget-av: ci interface initialised. [ 10.119653] EXT3-fs (sda1): using internal journal [ 11.163519] padlock: Using VIA PadLock ACE for AES algorithm. [ 12.590730] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 12.647574] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 12.712643] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 12.785653] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 13.572581] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 18.031150] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 23.976042] eth0: no IPv6 routers present