| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201008052158.36385.rjw@sisk.pl>
Date: Thu, 5 Aug 2010 21:58:36 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Tejun Heo <htejun@...il.com>
Cc: Stephan Diestelhorst <stephan.diestelhorst@...il.com>,
linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
linux-pm@...ts.osdl.org, stephan.diestelhorst@....com
Subject: Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM
On Thursday, August 05, 2010, Tejun Heo wrote:
> Hello, Rafael.
>
> Can you please try the following patch and see whether the problem
> goes away?
I'm going to LinuxCon shortly and I'm afraid I won't be able to test it until
I get back home. However, it seems that Stephan could reproduce the issue
more easily, so parhaps he'll be able to test it earlier.
Thanks,
Rafael
> drivers/ata/ahci.c | 3
> drivers/ata/ahci.h | 1
> drivers/ata/ahci_platform.c | 3
> drivers/ata/ata_piix.c | 24 +++
> drivers/ata/libahci.c | 161 +++++++-------------------
> drivers/ata/libata-core.c | 269 ++++++++++----------------------------------
> drivers/ata/libata-eh.c | 176 +++++++++++++++++++++++++---
> drivers/ata/libata-pmp.c | 49 +++++++-
> drivers/ata/libata-scsi.c | 74 ++++--------
> drivers/ata/libata.h | 12 +
> include/linux/libata.h | 40 +++---
> 11 files changed, 393 insertions(+), 419 deletions(-)
>
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index f252253..cfdc22b 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -1190,9 +1190,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> ata_port_pbar_desc(ap, AHCI_PCI_BAR,
> 0x100 + ap->port_no * 0x80, "port");
>
> - /* set initial link pm policy */
> - ap->pm_policy = NOT_AVAILABLE;
> -
> /* set enclosure management message type */
> if (ap->flags & ATA_FLAG_EM)
> ap->em_message_type = hpriv->em_msg_type;
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index 7113c57..6d07948 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -201,7 +201,6 @@ enum {
> AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
> AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
> AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
> - AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
> AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
> AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
> AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 5e11b16..0f69afe 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -120,9 +120,6 @@ static int __init ahci_probe(struct platform_device *pdev)
> ata_port_desc(ap, "mmio %pR", mem);
> ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
>
> - /* set initial link pm policy */
> - ap->pm_policy = NOT_AVAILABLE;
> -
> /* set enclosure management message type */
> if (ap->flags & ATA_FLAG_EM)
> ap->em_message_type = hpriv->em_msg_type;
> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
> index 7409f98..0df0477 100644
> --- a/drivers/ata/ata_piix.c
> +++ b/drivers/ata/ata_piix.c
> @@ -174,6 +174,8 @@ static int piix_sidpr_scr_read(struct ata_link *link,
> unsigned int reg, u32 *val);
> static int piix_sidpr_scr_write(struct ata_link *link,
> unsigned int reg, u32 val);
> +static int piix_sidpr_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned hints);
> static bool piix_irq_check(struct ata_port *ap);
> #ifdef CONFIG_PM
> static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
> @@ -343,11 +345,22 @@ static struct ata_port_operations ich_pata_ops = {
> .set_dmamode = ich_set_dmamode,
> };
>
> +static struct device_attribute *piix_sidpr_shost_attrs[] = {
> + &dev_attr_link_power_management_policy,
> + NULL
> +};
> +
> +static struct scsi_host_template piix_sidpr_sht = {
> + ATA_BMDMA_SHT(DRV_NAME),
> + .shost_attrs = piix_sidpr_shost_attrs,
> +};
> +
> static struct ata_port_operations piix_sidpr_sata_ops = {
> .inherits = &piix_sata_ops,
> .hardreset = sata_std_hardreset,
> .scr_read = piix_sidpr_scr_read,
> .scr_write = piix_sidpr_scr_write,
> + .set_ipm = piix_sidpr_set_ipm,
> };
>
> static const struct piix_map_db ich5_map_db = {
> @@ -973,6 +986,12 @@ static int piix_sidpr_scr_write(struct ata_link *link,
> return 0;
> }
>
> +static int piix_sidpr_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned hints)
> +{
> + return sata_link_scr_ipm(link, policy, false);
> +}
> +
> static bool piix_irq_check(struct ata_port *ap)
> {
> if (unlikely(!ap->ioaddr.bmdma_addr))
> @@ -1532,6 +1551,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
> struct device *dev = &pdev->dev;
> struct ata_port_info port_info[2];
> const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
> + struct scsi_host_template *sht = &piix_sht;
> unsigned long port_flags;
> struct ata_host *host;
> struct piix_host_priv *hpriv;
> @@ -1600,6 +1620,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
> rc = piix_init_sidpr(host);
> if (rc)
> return rc;
> + if (host->ports[0]->ops == &piix_sidpr_sata_ops)
> + sht = &piix_sidpr_sht;
> }
>
> /* apply IOCFG bit18 quirk */
> @@ -1626,7 +1648,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
> host->flags |= ATA_HOST_PARALLEL_SCAN;
>
> pci_set_master(pdev);
> - return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht);
> + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
> }
>
> static void piix_remove_one(struct pci_dev *pdev)
> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index 81e772a..2c5f3df 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -56,9 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)
> module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
> MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
>
> -static int ahci_enable_alpm(struct ata_port *ap,
> - enum link_pm policy);
> -static void ahci_disable_alpm(struct ata_port *ap);
> +static int ahci_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned hints);
> static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
> static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
> size_t size);
> @@ -172,8 +171,7 @@ struct ata_port_operations ahci_ops = {
> .pmp_attach = ahci_pmp_attach,
> .pmp_detach = ahci_pmp_detach,
>
> - .enable_pm = ahci_enable_alpm,
> - .disable_pm = ahci_disable_alpm,
> + .set_ipm = ahci_set_ipm,
> .em_show = ahci_led_show,
> .em_store = ahci_led_store,
> .sw_activity_show = ahci_activity_show,
> @@ -644,127 +642,59 @@ static void ahci_power_up(struct ata_port *ap)
> writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
> }
>
> -static void ahci_disable_alpm(struct ata_port *ap)
> +static int ahci_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned int hints)
> {
> + struct ata_port *ap = link->ap;
> struct ahci_host_priv *hpriv = ap->host->private_data;
> - void __iomem *port_mmio = ahci_port_base(ap);
> - u32 cmd;
> struct ahci_port_priv *pp = ap->private_data;
> -
> - /* IPM bits should be disabled by libata-core */
> - /* get the existing command bits */
> - cmd = readl(port_mmio + PORT_CMD);
> -
> - /* disable ALPM and ASP */
> - cmd &= ~PORT_CMD_ASP;
> - cmd &= ~PORT_CMD_ALPE;
> -
> - /* force the interface back to active */
> - cmd |= PORT_CMD_ICC_ACTIVE;
> -
> - /* write out new cmd value */
> - writel(cmd, port_mmio + PORT_CMD);
> - cmd = readl(port_mmio + PORT_CMD);
> -
> - /* wait 10ms to be sure we've come out of any low power state */
> - msleep(10);
> -
> - /* clear out any PhyRdy stuff from interrupt status */
> - writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
> -
> - /* go ahead and clean out PhyRdy Change from Serror too */
> - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
> -
> - /*
> - * Clear flag to indicate that we should ignore all PhyRdy
> - * state changes
> - */
> - hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
> -
> - /*
> - * Enable interrupts on Phy Ready.
> - */
> - pp->intr_mask |= PORT_IRQ_PHYRDY;
> - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
> -
> - /*
> - * don't change the link pm policy - we can be called
> - * just to turn of link pm temporarily
> - */
> -}
> -
> -static int ahci_enable_alpm(struct ata_port *ap,
> - enum link_pm policy)
> -{
> - struct ahci_host_priv *hpriv = ap->host->private_data;
> void __iomem *port_mmio = ahci_port_base(ap);
> - u32 cmd;
> - struct ahci_port_priv *pp = ap->private_data;
> - u32 asp;
>
> - /* Make sure the host is capable of link power management */
> - if (!(hpriv->cap & HOST_CAP_ALPM))
> - return -EINVAL;
> + ata_link_printk(link, KERN_INFO, "XXX ahci_set_ipm: pol=%d hints=%x\n",
> + policy, hints);
>
> - switch (policy) {
> - case MAX_PERFORMANCE:
> - case NOT_AVAILABLE:
> + if (policy != ATA_IPM_MAX_POWER) {
> /*
> - * if we came here with NOT_AVAILABLE,
> - * it just means this is the first time we
> - * have tried to enable - default to max performance,
> - * and let the user go to lower power modes on request.
> + * Disable interrupts on Phy Ready. This keeps us from
> + * getting woken up due to spurious phy ready
> + * interrupts.
> */
> - ahci_disable_alpm(ap);
> - return 0;
> - case MIN_POWER:
> - /* configure HBA to enter SLUMBER */
> - asp = PORT_CMD_ASP;
> - break;
> - case MEDIUM_POWER:
> - /* configure HBA to enter PARTIAL */
> - asp = 0;
> - break;
> - default:
> - return -EINVAL;
> + pp->intr_mask &= ~PORT_IRQ_PHYRDY;
> + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
> +
> + sata_link_scr_ipm(link, policy, false);
> }
>
> - /*
> - * Disable interrupts on Phy Ready. This keeps us from
> - * getting woken up due to spurious phy ready interrupts
> - * TBD - Hot plug should be done via polling now, is
> - * that even supported?
> - */
> - pp->intr_mask &= ~PORT_IRQ_PHYRDY;
> - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
> + if (hpriv->cap & HOST_CAP_ALPM) {
> + u32 cmd = readl(port_mmio + PORT_CMD);
>
> - /*
> - * Set a flag to indicate that we should ignore all PhyRdy
> - * state changes since these can happen now whenever we
> - * change link state
> - */
> - hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
> + if (policy == ATA_IPM_MAX_POWER || !(hints & ATA_IPM_HIPM)) {
> + cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
> + cmd |= PORT_CMD_ICC_ACTIVE;
>
> - /* get the existing command bits */
> - cmd = readl(port_mmio + PORT_CMD);
> + writel(cmd, port_mmio + PORT_CMD);
> + readl(port_mmio + PORT_CMD);
>
> - /*
> - * Set ASP based on Policy
> - */
> - cmd |= asp;
> + /* wait 10ms to be sure we've come out of IPM state */
> + msleep(10);
> + } else {
> + cmd |= PORT_CMD_ALPE;
> + if (policy == ATA_IPM_MIN_POWER)
> + cmd |= PORT_CMD_ASP;
>
> - /*
> - * Setting this bit will instruct the HBA to aggressively
> - * enter a lower power link state when it's appropriate and
> - * based on the value set above for ASP
> - */
> - cmd |= PORT_CMD_ALPE;
> + /* write out new cmd value */
> + writel(cmd, port_mmio + PORT_CMD);
> + }
> + }
>
> - /* write out new cmd value */
> - writel(cmd, port_mmio + PORT_CMD);
> - cmd = readl(port_mmio + PORT_CMD);
> + if (policy == ATA_IPM_MAX_POWER) {
> + sata_link_scr_ipm(link, policy, false);
> +
> + /* turn PHYRDY IRQ back on */
> + pp->intr_mask |= PORT_IRQ_PHYRDY;
> + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
> + }
>
> - /* IPM bits should be set by libata-core */
> return 0;
> }
>
> @@ -1662,15 +1592,10 @@ static void ahci_port_intr(struct ata_port *ap)
> if (unlikely(resetting))
> status &= ~PORT_IRQ_BAD_PMP;
>
> - /* If we are getting PhyRdy, this is
> - * just a power state change, we should
> - * clear out this, plus the PhyRdy/Comm
> - * Wake bits from Serror
> - */
> - if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
> - (status & PORT_IRQ_PHYRDY)) {
> + /* if IPM is enabled, PHYRDY doesn't mean anything */
> + if (ap->link.ipm_policy > ATA_IPM_MAX_POWER) {
> status &= ~PORT_IRQ_PHYRDY;
> - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
> + ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
> }
>
> if (unlikely(status & PORT_IRQ_ERROR)) {
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index ddf8e48..5d1eeb1 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -91,8 +91,6 @@ const struct ata_port_operations sata_port_ops = {
> static unsigned int ata_dev_init_params(struct ata_device *dev,
> u16 heads, u16 sectors);
> static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
> -static unsigned int ata_dev_set_feature(struct ata_device *dev,
> - u8 enable, u8 feature);
> static void ata_dev_xfermask(struct ata_device *dev);
> static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
>
> @@ -1032,182 +1030,6 @@ static const char *sata_spd_string(unsigned int spd)
> return spd_str[spd - 1];
> }
>
> -static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
> -{
> - struct ata_link *link = dev->link;
> - struct ata_port *ap = link->ap;
> - u32 scontrol;
> - unsigned int err_mask;
> - int rc;
> -
> - /*
> - * disallow DIPM for drivers which haven't set
> - * ATA_FLAG_IPM. This is because when DIPM is enabled,
> - * phy ready will be set in the interrupt status on
> - * state changes, which will cause some drivers to
> - * think there are errors - additionally drivers will
> - * need to disable hot plug.
> - */
> - if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) {
> - ap->pm_policy = NOT_AVAILABLE;
> - return -EINVAL;
> - }
> -
> - /*
> - * For DIPM, we will only enable it for the
> - * min_power setting.
> - *
> - * Why? Because Disks are too stupid to know that
> - * If the host rejects a request to go to SLUMBER
> - * they should retry at PARTIAL, and instead it
> - * just would give up. So, for medium_power to
> - * work at all, we need to only allow HIPM.
> - */
> - rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
> - if (rc)
> - return rc;
> -
> - switch (policy) {
> - case MIN_POWER:
> - /* no restrictions on IPM transitions */
> - scontrol &= ~(0x3 << 8);
> - rc = sata_scr_write(link, SCR_CONTROL, scontrol);
> - if (rc)
> - return rc;
> -
> - /* enable DIPM */
> - if (dev->flags & ATA_DFLAG_DIPM)
> - err_mask = ata_dev_set_feature(dev,
> - SETFEATURES_SATA_ENABLE, SATA_DIPM);
> - break;
> - case MEDIUM_POWER:
> - /* allow IPM to PARTIAL */
> - scontrol &= ~(0x1 << 8);
> - scontrol |= (0x2 << 8);
> - rc = sata_scr_write(link, SCR_CONTROL, scontrol);
> - if (rc)
> - return rc;
> -
> - /*
> - * we don't have to disable DIPM since IPM flags
> - * disallow transitions to SLUMBER, which effectively
> - * disable DIPM if it does not support PARTIAL
> - */
> - break;
> - case NOT_AVAILABLE:
> - case MAX_PERFORMANCE:
> - /* disable all IPM transitions */
> - scontrol |= (0x3 << 8);
> - rc = sata_scr_write(link, SCR_CONTROL, scontrol);
> - if (rc)
> - return rc;
> -
> - /*
> - * we don't have to disable DIPM since IPM flags
> - * disallow all transitions which effectively
> - * disable DIPM anyway.
> - */
> - break;
> - }
> -
> - /* FIXME: handle SET FEATURES failure */
> - (void) err_mask;
> -
> - return 0;
> -}
> -
> -/**
> - * ata_dev_enable_pm - enable SATA interface power management
> - * @dev: device to enable power management
> - * @policy: the link power management policy
> - *
> - * Enable SATA Interface power management. This will enable
> - * Device Interface Power Management (DIPM) for min_power
> - * policy, and then call driver specific callbacks for
> - * enabling Host Initiated Power management.
> - *
> - * Locking: Caller.
> - * Returns: -EINVAL if IPM is not supported, 0 otherwise.
> - */
> -void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy)
> -{
> - int rc = 0;
> - struct ata_port *ap = dev->link->ap;
> -
> - /* set HIPM first, then DIPM */
> - if (ap->ops->enable_pm)
> - rc = ap->ops->enable_pm(ap, policy);
> - if (rc)
> - goto enable_pm_out;
> - rc = ata_dev_set_dipm(dev, policy);
> -
> -enable_pm_out:
> - if (rc)
> - ap->pm_policy = MAX_PERFORMANCE;
> - else
> - ap->pm_policy = policy;
> - return /* rc */; /* hopefully we can use 'rc' eventually */
> -}
> -
> -#ifdef CONFIG_PM
> -/**
> - * ata_dev_disable_pm - disable SATA interface power management
> - * @dev: device to disable power management
> - *
> - * Disable SATA Interface power management. This will disable
> - * Device Interface Power Management (DIPM) without changing
> - * policy, call driver specific callbacks for disabling Host
> - * Initiated Power management.
> - *
> - * Locking: Caller.
> - * Returns: void
> - */
> -static void ata_dev_disable_pm(struct ata_device *dev)
> -{
> - struct ata_port *ap = dev->link->ap;
> -
> - ata_dev_set_dipm(dev, MAX_PERFORMANCE);
> - if (ap->ops->disable_pm)
> - ap->ops->disable_pm(ap);
> -}
> -#endif /* CONFIG_PM */
> -
> -void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
> -{
> - ap->pm_policy = policy;
> - ap->link.eh_info.action |= ATA_EH_LPM;
> - ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
> - ata_port_schedule_eh(ap);
> -}
> -
> -#ifdef CONFIG_PM
> -static void ata_lpm_enable(struct ata_host *host)
> -{
> - struct ata_link *link;
> - struct ata_port *ap;
> - struct ata_device *dev;
> - int i;
> -
> - for (i = 0; i < host->n_ports; i++) {
> - ap = host->ports[i];
> - ata_for_each_link(link, ap, EDGE) {
> - ata_for_each_dev(dev, link, ALL)
> - ata_dev_disable_pm(dev);
> - }
> - }
> -}
> -
> -static void ata_lpm_disable(struct ata_host *host)
> -{
> - int i;
> -
> - for (i = 0; i < host->n_ports; i++) {
> - struct ata_port *ap = host->ports[i];
> - ata_lpm_schedule(ap, ap->pm_policy);
> - }
> -}
> -#endif /* CONFIG_PM */
> -
> /**
> * ata_dev_classify - determine device type based on ATA-spec signature
> * @tf: ATA taskfile register set for device to be identified
> @@ -2566,13 +2388,6 @@ int ata_dev_configure(struct ata_device *dev)
> if (dev->flags & ATA_DFLAG_LBA48)
> dev->max_sectors = ATA_MAX_SECTORS_LBA48;
>
> - if (!(dev->horkage & ATA_HORKAGE_IPM)) {
> - if (ata_id_has_hipm(dev->id))
> - dev->flags |= ATA_DFLAG_HIPM;
> - if (ata_id_has_dipm(dev->id))
> - dev->flags |= ATA_DFLAG_DIPM;
> - }
> -
> /* Limit PATA drive on SATA cable bridge transfers to udma5,
> 200 sectors */
> if (ata_dev_knobble(dev)) {
> @@ -2593,13 +2408,6 @@ int ata_dev_configure(struct ata_device *dev)
> dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
> dev->max_sectors);
>
> - if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) {
> - dev->horkage |= ATA_HORKAGE_IPM;
> -
> - /* reset link pm_policy for this port to no pm */
> - ap->pm_policy = MAX_PERFORMANCE;
> - }
> -
> if (ap->ops->dev_config)
> ap->ops->dev_config(dev);
>
> @@ -3630,7 +3438,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
> * @params: timing parameters { interval, duratinon, timeout } in msec
> * @deadline: deadline jiffies for the operation
> *
> -* Make sure SStatus of @link reaches stable state, determined by
> + * Make sure SStatus of @link reaches stable state, determined by
> * holding the same value where DET is not 1 for @duration polled
> * every @interval, before @timeout. Timeout constraints the
> * beginning of the stable state. Because DET gets stuck at 1 on
> @@ -3761,6 +3569,65 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
> return rc != -EINVAL ? rc : 0;
> }
>
> +int sata_link_scr_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + bool spm_wakeup)
> +{
> + struct ata_eh_context *ehc = &link->eh_context;
> + bool woken_up = false;
> + u32 scontrol;
> + int rc;
> +
> + ata_link_printk(link, KERN_INFO,
> + "XXX sata_link_scr_ipm: pol=%d spm_wakeup=%d\n",
> + policy, spm_wakeup);
> + rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
> + if (rc)
> + return rc;
> +
> + switch (policy) {
> + case ATA_IPM_MAX_POWER:
> + /* disable all IPM transitions */
> + scontrol |= (0x3 << 8);
> + /* initiate transition to active state */
> + if (spm_wakeup) {
> + scontrol |= (0x4 << 12);
> + woken_up = true;
> + }
> + break;
> + case ATA_IPM_MED_POWER:
> + /* allow IPM to PARTIAL */
> + scontrol &= ~(0x1 << 8);
> + scontrol |= (0x2 << 8);
> + break;
> + case ATA_IPM_MIN_POWER:
> + /* no restrictions on IPM transitions */
> + scontrol &= ~(0x3 << 8);
> + break;
> + default:
> + WARN_ON(1);
> + }
> +
> + ata_link_printk(link, KERN_INFO,
> + "XXX sata_link_scr_ipm: updating sctl to %x\n",
> + scontrol);
> + rc = sata_scr_write(link, SCR_CONTROL, scontrol);
> + if (rc)
> + return rc;
> +
> + /* give the link time to transit out of IPM state */
> + if (woken_up) {
> + msleep(10);
> + ata_link_printk(link, KERN_INFO,
> + "XXX sata_link_scr_ipm: sleeping 10msec\n");
> + }
> +
> + /* clear PHYRDY_CHG from SError */
> + ata_link_printk(link, KERN_INFO,
> + "XXX sata_link_scr_ipm: clearing serr\n");
> + ehc->i.serror &= ~SERR_PHYRDY_CHG;
> + return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
> +}
> +
> /**
> * ata_std_prereset - prepare for reset
> * @link: ATA link to be reset
> @@ -4570,6 +4437,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
> DPRINTK("EXIT, err_mask=%x\n", err_mask);
> return err_mask;
> }
> +
> /**
> * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
> * @dev: Device to which command will be sent
> @@ -4585,8 +4453,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
> * RETURNS:
> * 0 on success, AC_ERR_* mask otherwise.
> */
> -static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable,
> - u8 feature)
> +unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature)
> {
> struct ata_taskfile tf;
> unsigned int err_mask;
> @@ -5436,12 +5303,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
> {
> int rc;
>
> - /*
> - * disable link pm on all ports before requesting
> - * any pm activity
> - */
> - ata_lpm_enable(host);
> -
> rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
> if (rc == 0)
> host->dev->power.power_state = mesg;
> @@ -5464,9 +5325,6 @@ void ata_host_resume(struct ata_host *host)
> ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
> ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
> host->dev->power.power_state = PMSG_ON;
> -
> - /* reenable link pm */
> - ata_lpm_disable(host);
> }
> #endif
>
> @@ -6025,7 +5883,7 @@ static void async_port_probe(void *data, async_cookie_t cookie)
> spin_lock_irqsave(ap->lock, flags);
>
> ehi->probe_mask |= ATA_ALL_DEVICES;
> - ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
> + ehi->action |= ATA_EH_RESET;
> ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
>
> ap->pflags &= ~ATA_PFLAG_INITIALIZING;
> @@ -6698,6 +6556,7 @@ EXPORT_SYMBOL_GPL(sata_set_spd);
> EXPORT_SYMBOL_GPL(ata_wait_after_reset);
> EXPORT_SYMBOL_GPL(sata_link_debounce);
> EXPORT_SYMBOL_GPL(sata_link_resume);
> +EXPORT_SYMBOL_GPL(sata_link_scr_ipm);
> EXPORT_SYMBOL_GPL(ata_std_prereset);
> EXPORT_SYMBOL_GPL(sata_link_hardreset);
> EXPORT_SYMBOL_GPL(sata_std_hardreset);
> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
> index f77a673..bd77d94 100644
> --- a/drivers/ata/libata-eh.c
> +++ b/drivers/ata/libata-eh.c
> @@ -1568,14 +1568,15 @@ static void ata_eh_analyze_serror(struct ata_link *link)
> action |= ATA_EH_RESET;
> }
>
> - /* Determine whether a hotplug event has occurred. Both
> + /*
> + * Determine whether a hotplug event has occurred. Both
> * SError.N/X are considered hotplug events for enabled or
> * host links. For disabled PMP links, only N bit is
> * considered as X bit is left at 1 for link plugging.
> */
> - hotplug_mask = 0;
> -
> - if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
> + if (link->ipm_policy != ATA_IPM_MAX_POWER)
> + hotplug_mask = 0; /* hotplug doesn't work w/ IPM */
> + else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
> hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
> else
> hotplug_mask = SERR_PHYRDY_CHG;
> @@ -2776,8 +2777,9 @@ int ata_eh_reset(struct ata_link *link, int classify,
> ata_eh_done(link, NULL, ATA_EH_RESET);
> if (slave)
> ata_eh_done(slave, NULL, ATA_EH_RESET);
> - ehc->last_reset = jiffies; /* update to completion time */
> + ehc->last_reset = jiffies; /* update to completion time */
> ehc->i.action |= ATA_EH_REVALIDATE;
> + link->ipm_policy = ATA_IPM_UNKNOWN; /* reset IPM state */
>
> rc = 0;
> out:
> @@ -3203,6 +3205,124 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
> return rc;
> }
>
> +/**
> + * ata_eh_set_ipm - configure SATA interface power management
> + * @link: link to configure power management
> + * @policy: the link power management policy
> + * @r_failed_dev: out parameter for failed device
> + *
> + * Enable SATA Interface power management. This will enable
> + * Device Interface Power Management (DIPM) for min_power
> + * policy, and then call driver specific callbacks for
> + * enabling Host Initiated Power management.
> + *
> + * LOCKING:
> + * EH context.
> + *
> + * RETURNS:
> + * 0 on success, -errno on failure.
> + */
> +static int ata_eh_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + struct ata_device **r_failed_dev)
> +{
> + struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
> + struct ata_eh_context *ehc = &link->eh_context;
> + struct ata_device *dev, *link_dev = NULL, *ipm_dev = NULL;
> + unsigned int hints = ATA_IPM_EMPTY | ATA_IPM_HIPM;
> + unsigned int err_mask;
> + int rc;
> +
> + /* if the link or host doesn't do IPM, noop */
> + if ((link->flags & ATA_LFLAG_NO_IPM) || (ap && !ap->ops->set_ipm))
> + return 0;
> +
> + /*
> + * DIPM is enabled only for MIN_POWER as some devices
> + * misbehave when the host NACKs transition to SLUMBER. Order
> + * device and link configurations such that the host always
> + * allows DIPM requests.
> + */
> + ata_for_each_dev(dev, link, ENABLED) {
> + bool hipm = ata_id_has_hipm(dev->id);
> + bool dipm = ata_id_has_dipm(dev->id);
> +
> + /* find the first enabled and IPM enabled devices */
> + if (!link_dev)
> + link_dev = dev;
> +
> + if (!ipm_dev && (hipm || dipm))
> + ipm_dev = dev;
> +
> + hints &= ~ATA_IPM_EMPTY;
> + if (!hipm)
> + hints &= ~ATA_IPM_HIPM;
> +
> + /* disable DIPM before changing link config */
> + if (policy != ATA_IPM_MIN_POWER && dipm) {
> + ata_dev_printk(dev, KERN_INFO, "XXX ata_eh_set_ipm: disabling DIPM\n");
> + err_mask = ata_dev_set_feature(dev,
> + SETFEATURES_SATA_DISABLE, SATA_DIPM);
> + if (err_mask && err_mask != AC_ERR_DEV) {
> + ata_dev_printk(dev, KERN_WARNING,
> + "error while disabling DIPM\n");
> + rc = -EIO;
> + goto fail;
> + }
> + }
> + }
> +
> + if (ap) {
> + rc = ap->ops->set_ipm(link, policy, hints);
> + if (!rc && ap->slave_link)
> + rc = ap->ops->set_ipm(ap->slave_link, policy, hints);
> + } else
> + rc = sata_pmp_set_ipm(link, policy, hints);
> +
> + /*
> + * Attribute link config failure to the first (IPM) enabled
> + * device on the link.
> + */
> + if (rc) {
> + if (rc == -EOPNOTSUPP) {
> + link->flags |= ATA_LFLAG_NO_IPM;
> + return 0;
> + }
> + dev = ipm_dev ? ipm_dev : link_dev;
> + goto fail;
> + }
> +
> + /* host config updated, enable DIPM if transitioning to MIN_POWER */
> + ata_for_each_dev(dev, link, ENABLED) {
> + if (policy == ATA_IPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
> + ata_dev_printk(dev, KERN_INFO, "XXX ata_eh_set_ipm: enabling DIPM\n");
> + err_mask = ata_dev_set_feature(dev,
> + SETFEATURES_SATA_ENABLE, SATA_DIPM);
> + if (err_mask && err_mask != AC_ERR_DEV) {
> + ata_dev_printk(dev, KERN_WARNING,
> + "error while enabling DIPM\n");
> + rc = -EIO;
> + goto fail;
> + }
> + }
> + }
> +
> + link->ipm_policy = policy;
> + if (ap && ap->slave_link)
> + ap->slave_link->ipm_policy = policy;
> + return 0;
> +
> +fail:
> + /* if no device or the last chance for the device, disable IPM */
> + if (!dev || ehc->tries[dev->devno] == 1) {
> + ata_link_printk(link, KERN_WARNING,
> + "disabling IPM on the link\n");
> + link->flags |= ATA_LFLAG_NO_IPM;
> + }
> + if (r_failed_dev)
> + *r_failed_dev = dev;
> + return rc;
> +}
> +
> static int ata_link_nr_enabled(struct ata_link *link)
> {
> struct ata_device *dev;
> @@ -3283,6 +3403,16 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
> ehc->saved_xfer_mode[dev->devno] = 0;
> ehc->saved_ncq_enabled &= ~(1 << dev->devno);
>
> + /* the link maybe in a deep sleep, wake it up */
> + if (link->ipm_policy > ATA_IPM_MAX_POWER) {
> + if (ata_is_host_link(link))
> + link->ap->ops->set_ipm(link, ATA_IPM_MAX_POWER,
> + ATA_IPM_EMPTY);
> + else
> + sata_pmp_set_ipm(link, ATA_IPM_MAX_POWER,
> + ATA_IPM_EMPTY);
> + }
> +
> /* Record and count probe trials on the ering. The specific
> * error mask used is irrelevant. Because a successful device
> * detection clears the ering, this count accumulates only if
> @@ -3384,8 +3514,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
> {
> struct ata_link *link;
> struct ata_device *dev;
> - int nr_failed_devs;
> - int rc;
> + int rc, nr_fails;
> unsigned long flags, deadline;
>
> DPRINTK("ENTER\n");
> @@ -3426,7 +3555,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
>
> retry:
> rc = 0;
> - nr_failed_devs = 0;
>
> /* if UNLOADING, finish immediately */
> if (ap->pflags & ATA_PFLAG_UNLOADING)
> @@ -3511,13 +3639,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
> }
>
> /* the rest */
> - ata_for_each_link(link, ap, EDGE) {
> + nr_fails = 0;
> + ata_for_each_link(link, ap, PMP_FIRST) {
> struct ata_eh_context *ehc = &link->eh_context;
>
> + if (sata_pmp_attached(ap) && ata_is_host_link(link))
> + goto config_ipm;
> +
> /* revalidate existing devices and attach new ones */
> rc = ata_eh_revalidate_and_attach(link, &dev);
> if (rc)
> - goto dev_fail;
> + goto rest_fail;
>
> /* if PMP got attached, return, pmp EH will take care of it */
> if (link->device->class == ATA_DEV_PMP) {
> @@ -3529,7 +3661,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
> if (ehc->i.flags & ATA_EHI_SETMODE) {
> rc = ata_set_mode(link, &dev);
> if (rc)
> - goto dev_fail;
> + goto rest_fail;
> ehc->i.flags &= ~ATA_EHI_SETMODE;
> }
>
> @@ -3542,7 +3674,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
> continue;
> rc = atapi_eh_clear_ua(dev);
> if (rc)
> - goto dev_fail;
> + goto rest_fail;
> }
> }
>
> @@ -3552,21 +3684,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
> continue;
> rc = ata_eh_maybe_retry_flush(dev);
> if (rc)
> - goto dev_fail;
> + goto rest_fail;
> }
>
> + config_ipm:
> /* configure link power saving */
> - if (ehc->i.action & ATA_EH_LPM)
> - ata_for_each_dev(dev, link, ALL)
> - ata_dev_enable_pm(dev, ap->pm_policy);
> + if (link->ipm_policy != ap->target_ipm_policy) {
> + rc = ata_eh_set_ipm(link, ap->target_ipm_policy, &dev);
> + if (rc)
> + goto rest_fail;
> + }
>
> /* this link is okay now */
> ehc->i.flags = 0;
> continue;
>
> -dev_fail:
> - nr_failed_devs++;
> - ata_eh_handle_dev_fail(dev, rc);
> + rest_fail:
> + nr_fails++;
> + if (dev)
> + ata_eh_handle_dev_fail(dev, rc);
>
> if (ap->pflags & ATA_PFLAG_FROZEN) {
> /* PMP reset requires working host port.
> @@ -3578,7 +3714,7 @@ dev_fail:
> }
> }
>
> - if (nr_failed_devs)
> + if (nr_fails)
> goto retry;
>
> out:
> diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
> index 224faab..06a66ca 100644
> --- a/drivers/ata/libata-pmp.c
> +++ b/drivers/ata/libata-pmp.c
> @@ -185,6 +185,27 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
> }
>
> /**
> + * sata_pmp_set_ipm - configure IPM for a PMP link
> + * @link: PMP link to configure IPM for
> + * @policy: target IPM policy
> + * @hints: IPM hints
> + *
> + * Configure IPM for @link. This function will contain any PMP
> + * specific workarounds if necessary.
> + *
> + * LOCKING:
> + * EH context.
> + *
> + * RETURNS:
> + * 0 on success, -errno on failure.
> + */
> +int sata_pmp_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned hints)
> +{
> + return sata_link_scr_ipm(link, policy, true);
> +}
> +
> +/**
> * sata_pmp_read_gscr - read GSCR block of SATA PMP
> * @dev: PMP device
> * @gscr: buffer to read GSCR block into
> @@ -351,6 +372,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
> if (vendor == 0x1095 && devid == 0x3726) {
> /* sil3726 quirks */
> ata_for_each_link(link, ap, EDGE) {
> + /* link reports offline after IPM */
> + link->flags |= ATA_LFLAG_NO_IPM;
> +
> /* Class code report is unreliable and SRST
> * times out under certain configurations.
> */
> @@ -366,6 +390,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
> } else if (vendor == 0x1095 && devid == 0x4723) {
> /* sil4723 quirks */
> ata_for_each_link(link, ap, EDGE) {
> + /* link reports offline after IPM */
> + link->flags |= ATA_LFLAG_NO_IPM;
> +
> /* class code report is unreliable */
> if (link->pmp < 2)
> link->flags |= ATA_LFLAG_ASSUME_ATA;
> @@ -378,6 +405,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
> } else if (vendor == 0x1095 && devid == 0x4726) {
> /* sil4726 quirks */
> ata_for_each_link(link, ap, EDGE) {
> + /* link reports offline after IPM */
> + link->flags |= ATA_LFLAG_NO_IPM;
> +
> /* Class code report is unreliable and SRST
> * times out under certain configurations.
> * Config device can be at port 0 or 5 and
> @@ -938,15 +968,26 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
> if (rc)
> goto link_fail;
>
> - /* Connection status might have changed while resetting other
> - * links, check SATA_PMP_GSCR_ERROR before returning.
> - */
> -
> +
> /* clear SNotification */
> rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
> if (rc == 0)
> sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
>
> + /*
> + * If IPM is active on any fan-out port, hotplug wouldn't
> + * work. Return w/ PHY event notification disabled.
> + */
> + ata_for_each_link(link, ap, EDGE)
> + if (link->ipm_policy > ATA_IPM_MAX_POWER)
> + return 0;
> +
> + /*
> + * Connection status might have changed while resetting other
> + * links, enable notification and check SATA_PMP_GSCR_ERROR
> + * before returning.
> + */
> +
> /* enable notification */
> if (pmp_dev->flags & ATA_DFLAG_AN) {
> gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index a54273d..8801342 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -116,73 +116,55 @@ static struct scsi_transport_template ata_scsi_transport_template = {
> .user_scan = ata_scsi_user_scan,
> };
>
> -
> -static const struct {
> - enum link_pm value;
> - const char *name;
> -} link_pm_policy[] = {
> - { NOT_AVAILABLE, "max_performance" },
> - { MIN_POWER, "min_power" },
> - { MAX_PERFORMANCE, "max_performance" },
> - { MEDIUM_POWER, "medium_power" },
> +static const char *ata_ipm_policy_names[] = {
> + [ATA_IPM_UNKNOWN] = "max_performance",
> + [ATA_IPM_MAX_POWER] = "max_performance",
> + [ATA_IPM_MED_POWER] = "medium_power",
> + [ATA_IPM_MIN_POWER] = "min_power",
> };
>
> -static const char *ata_scsi_lpm_get(enum link_pm policy)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++)
> - if (link_pm_policy[i].value == policy)
> - return link_pm_policy[i].name;
> -
> - return NULL;
> -}
> -
> -static ssize_t ata_scsi_lpm_put(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t count)
> +static ssize_t ata_scsi_ipm_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> {
> struct Scsi_Host *shost = class_to_shost(dev);
> struct ata_port *ap = ata_shost_to_port(shost);
> - enum link_pm policy = 0;
> - int i;
> + enum ata_ipm_policy policy;
> + unsigned long flags;
>
> - /*
> - * we are skipping array location 0 on purpose - this
> - * is because a value of NOT_AVAILABLE is displayed
> - * to the user as max_performance, but when the user
> - * writes "max_performance", they actually want the
> - * value to match MAX_PERFORMANCE.
> - */
> - for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
> - const int len = strlen(link_pm_policy[i].name);
> - if (strncmp(link_pm_policy[i].name, buf, len) == 0) {
> - policy = link_pm_policy[i].value;
> + /* UNKNOWN is internal state, iterate from MAX_POWER */
> + for (policy = ATA_IPM_MAX_POWER;
> + policy < ARRAY_SIZE(ata_ipm_policy_names); policy++) {
> + const char *name = ata_ipm_policy_names[policy];
> +
> + if (strncmp(name, buf, strlen(name)) == 0)
> break;
> - }
> }
> - if (!policy)
> + if (policy == ARRAY_SIZE(ata_ipm_policy_names))
> return -EINVAL;
>
> - ata_lpm_schedule(ap, policy);
> + spin_lock_irqsave(ap->lock, flags);
> + ap->target_ipm_policy = policy;
> + ata_port_schedule_eh(ap);
> + spin_unlock_irqrestore(ap->lock, flags);
> +
> return count;
> }
>
> -static ssize_t
> -ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf)
> +static ssize_t ata_scsi_ipm_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> {
> struct Scsi_Host *shost = class_to_shost(dev);
> struct ata_port *ap = ata_shost_to_port(shost);
> - const char *policy =
> - ata_scsi_lpm_get(ap->pm_policy);
>
> - if (!policy)
> + if (ap->target_ipm_policy >= ARRAY_SIZE(ata_ipm_policy_names))
> return -EINVAL;
>
> - return snprintf(buf, 23, "%s\n", policy);
> + return snprintf(buf, PAGE_SIZE, "%s\n",
> + ata_ipm_policy_names[ap->target_ipm_policy]);
> }
> DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
> - ata_scsi_lpm_show, ata_scsi_lpm_put);
> + ata_scsi_ipm_show, ata_scsi_ipm_store);
> EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
>
> static ssize_t ata_scsi_park_show(struct device *device,
> diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
> index 4b84ed6..2dd0dfe 100644
> --- a/drivers/ata/libata.h
> +++ b/drivers/ata/libata.h
> @@ -87,6 +87,8 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
> extern int ata_dev_configure(struct ata_device *dev);
> extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
> extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
> +extern unsigned int ata_dev_set_feature(struct ata_device *dev,
> + u8 enable, u8 feature);
> extern void ata_sg_clean(struct ata_queued_cmd *qc);
> extern void ata_qc_free(struct ata_queued_cmd *qc);
> extern void ata_qc_issue(struct ata_queued_cmd *qc);
> @@ -101,8 +103,6 @@ extern int sata_link_init_spd(struct ata_link *link);
> extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
> extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
> extern struct ata_port *ata_port_alloc(struct ata_host *host);
> -extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
> -extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
>
> /* libata-acpi.c */
> #ifdef CONFIG_ATA_ACPI
> @@ -170,6 +170,8 @@ extern void ata_eh_finish(struct ata_port *ap);
> #ifdef CONFIG_SATA_PMP
> extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
> extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
> +extern int sata_pmp_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned hints);
> extern int sata_pmp_attach(struct ata_device *dev);
> #else /* CONFIG_SATA_PMP */
> static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val)
> @@ -182,6 +184,12 @@ static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
> return -EINVAL;
> }
>
> +static inline int sata_pmp_set_ipm(struct ata_link *link,
> + enum ata_ipm_policy policy, unsigned hints)
> +{
> + return -EINVAL;
> +}
> +
> static inline int sata_pmp_attach(struct ata_device *dev)
> {
> return -EINVAL;
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index b85f3ff..1f90dc5 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -172,6 +172,7 @@ enum {
> ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */
> ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */
> ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */
> + ATA_LFLAG_NO_IPM = (1 << 8), /* disable IPM on this link */
>
> /* struct ata_port flags */
> ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
> @@ -324,12 +325,11 @@ enum {
> ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */
> ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
> ATA_EH_ENABLE_LINK = (1 << 3),
> - ATA_EH_LPM = (1 << 4), /* link power management action */
> ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */
>
> ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK,
> ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET |
> - ATA_EH_ENABLE_LINK | ATA_EH_LPM,
> + ATA_EH_ENABLE_LINK,
>
> /* ata_eh_info->flags */
> ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
> @@ -376,7 +376,6 @@ enum {
> ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
> ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */
> ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
> - ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
> ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
> ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */
> ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
> @@ -463,6 +462,22 @@ enum ata_completion_errors {
> AC_ERR_NCQ = (1 << 10), /* marker for offending NCQ qc */
> };
>
> +/*
> + * Link pm policy: If you alter this, you also need to alter
> + * libata-scsi.c (for the ascii descriptions)
> + */
> +enum ata_ipm_policy {
> + ATA_IPM_UNKNOWN,
> + ATA_IPM_MAX_POWER,
> + ATA_IPM_MED_POWER,
> + ATA_IPM_MIN_POWER,
> +};
> +
> +enum ata_ipm_hints {
> + ATA_IPM_EMPTY = (1 << 0), /* port empty/probing */
> + ATA_IPM_HIPM = (1 << 1), /* may use HIPM */
> +};
> +
> /* forward declarations */
> struct scsi_device;
> struct ata_port_operations;
> @@ -477,16 +492,6 @@ typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
> unsigned long deadline);
> typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
>
> -/*
> - * host pm policy: If you alter this, you also need to alter libata-scsi.c
> - * (for the ascii descriptions)
> - */
> -enum link_pm {
> - NOT_AVAILABLE,
> - MIN_POWER,
> - MAX_PERFORMANCE,
> - MEDIUM_POWER,
> -};
> extern struct device_attribute dev_attr_link_power_management_policy;
> extern struct device_attribute dev_attr_unload_heads;
> extern struct device_attribute dev_attr_em_message_type;
> @@ -698,6 +703,7 @@ struct ata_link {
> unsigned int hw_sata_spd_limit;
> unsigned int sata_spd_limit;
> unsigned int sata_spd; /* current SATA PHY speed */
> + enum ata_ipm_policy ipm_policy;
>
> /* record runtime error info, protected by host_set lock */
> struct ata_eh_info eh_info;
> @@ -764,7 +770,7 @@ struct ata_port {
>
> pm_message_t pm_mesg;
> int *pm_result;
> - enum link_pm pm_policy;
> + enum ata_ipm_policy target_ipm_policy;
>
> struct timer_list fastdrain_timer;
> unsigned long fastdrain_cnt;
> @@ -830,8 +836,8 @@ struct ata_port_operations {
> int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
> void (*pmp_attach)(struct ata_port *ap);
> void (*pmp_detach)(struct ata_port *ap);
> - int (*enable_pm)(struct ata_port *ap, enum link_pm policy);
> - void (*disable_pm)(struct ata_port *ap);
> + int (*set_ipm)(struct ata_link *link, enum ata_ipm_policy policy,
> + unsigned hints);
>
> /*
> * Start, stop, suspend and resume
> @@ -943,6 +949,8 @@ extern int sata_link_debounce(struct ata_link *link,
> const unsigned long *params, unsigned long deadline);
> extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
> unsigned long deadline);
> +extern int sata_link_scr_ipm(struct ata_link *link, enum ata_ipm_policy policy,
> + bool spm_wakeup);
> extern int sata_link_hardreset(struct ata_link *link,
> const unsigned long *timing, unsigned long deadline,
> bool *online, int (*check_ready)(struct ata_link *));
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists