| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100806090018.GC23778@atomide.com>
Date: Fri, 6 Aug 2010 12:00:19 +0300
From: Tony Lindgren <tony@...mide.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-omap@...r.kernel.org
Subject: [GIT PULL] omap updates for 2.6.36 merge window
Hi Linus,
Please pull omap updates from:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
Regards,
Tony
The following changes since commit be82ae0238b0453afcf4a76f0512b7dde34ba500:
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm (2010-08-03 14:31:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
Anand Gadiyar (3):
OMAP3: wait on IDLEST after enabling USBTLL fclk
OMAP3630: Add ES1.1 and ES1.2 detection
omap: 3630: disable TLL SAR on 3630 ES1
Artem Bityutskiy (1):
omap: device: improve errors handling
Benoit Cousson (1):
OMAP2&3: hwmod: Remove _hwmod prefix in name string
Christoph Egger (8):
Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
Removing dead OMAP_IR
Removing dead OMAP_DSP
Removing dead OMAP_STI
Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
Removing dead APM
Removing dead MACH_OMAP_H4_OTG
Removing dead MACH_OMAP2_H4_USB1
Cory Maccarrone (1):
omap1: omap7xx clocks, mux, serial fixes
David Anders (1):
omap4: Add OMAP4 Panda Support
Deepak K (1):
omap2/3/4: serial: errata i202: fix for MDR1 access
Felipe Contreras (13):
omap: mailbox: trivial cleanups
omap: mailbox: reorganize structures
omap: mailbox: 2420 should be detected at run-time
omap: mailbox: use correct config for omap1
omap: mailbox: update omap1 probing
omap: mailbox: don't export unecessary symbols
omap: mailbox: remove unecessary fields
omap: mailbox: add IRQ names
omap: mailbox: reorganize registering
omap: mailbox: simplify omap_mbox_register()
omap: mailbox: only compile for configured archs
omap: mailbox: standarize on 'omap-mailbox'
omap: mailbox: reorganize headers
Fernando Guzman Lugo (4):
Mailbox: free mailbox interrupt before freeing blk queue
Mailbox: flush pending deferred works before freeing blk queue
Mailbox: Check valid registered callback before calling
Mailbox: disable mailbox interrupt when request queue
Govindraj R (1):
omap3: serial: Add context save and restore for mcr
Grazvydas Ignotas (3):
omap3: pandora: update gpio-keys data
omap3: pandora: add NAND and wifi support
omap: mux: fix multipath gpio handling
Hemanth V (1):
OMAP4: Add GPIO LED support for SDP board
Hiroshi DOYU (6):
omap iommu: Introduce iopgd_is_table MACRO
omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr
omap iommu: move iommu_disable at fault to the above layer
omap iommu: Make omap-iommu.o built-in
Mailbox: new mutext lock for h/w mailbox configuration
omap mailbox: Set a device in logical mbox instance for traceability
Jarkko Nikula (4):
omap: rx51: Set regulator V28 always on
omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber
omap: rx51: Use REGULATOR_SUPPLY macro when initializingregulator consumers
omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier
Jason Wang (1):
omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable
Kan-Ru Chen (5):
OMAP2: Devkit8000: Enable DVI-D output
OMAP2: Devkit8000: Setup LCD reset
omap: Add new interface omap_get_die_id
omap: Use omap_get_die_id() to get the DIE ids
omap: Devkit8000: Use DIE id to initialize dm9000 MAC address
Kanigeri, Hari (3):
omap iommu: update irq mask to be specific about twl and tlb
omap iommu: add functionality to get TLB miss interrupt
omap iommu: update ducati mmu irq define name
Kevin Hilman (8):
OMAP24xx: CM: fix mask used for checking IDLEST status
OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
OMAP: hwmod: add non-locking versions of enable and idle functions
OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
OMAP: PM: create omap_devices for MPU, DSP, L3
OMAP: hwmod data: add class for IVA hwmods
OMAP2&3: hwmod: Replace l3 -> l3_main
OMAP3: hwmod data: add data for OMAP3 IVA2
Mathias Nyman (1):
omap: tsl2563 ALS support for Nokia N900
Mike Rapoport (1):
omap3: introduce omap3_map_io
Nishanth Menon (4):
omap2/3/4: serial: remove initialization sparse warnings
omap2/3/4: serial: kill dev_attr_sleep_timeout sparse warn
omap2/3/4: serial: introduce errata handling
omap2/3: id: fix sparse warning
Ohad Ben-Cohen (6):
omap: zoom2: wlan board muxing
omap: zoom3: wlan board muxing
omap: mailbox: convert rwlocks to spinlock
omap: mailbox cleanup: split MODULE_AUTHOR line
omap: mailbox: remove (un)likely macros from cold paths
omap: mailbox: convert block api to kfifo
Paul Walmsley (9):
OMAP: clock: add kerneldoc for structures; move flags closer to structs
OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator)
OMAP1: clock: some cleanup
OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup()
OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
OMAP2+: hwmod/device: update documentation and copyright
OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat()
OMAP: PM constraints: add omap_pm_set_min_clk_rate()
Rajendra Nayak (2):
OMAP4: hwmod: Enable omap_device build for OMAP4
omap4: suspend: Add basic system suspend support
Samu Onkalo (1):
omap: dma: Support for prefetch in destination synchronizedtransfer
Santosh Shilimkar (3):
omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp
omap4: Add smc API to read AuxCoreBoot0 register
omap4: hotplug: Add basic CPU hotplug support
Sergio Aguirre (1):
omap3: Unify omap2_set_globals_3[43,6x]x functions
Shubhrajyoti Datta (1):
omap4: Board changes for 4430sdp tmp105 temperature sensor
Steve Sakoman (1):
omap: Overo: Fix support for second ethernet port
Sukumar Ghorai (8):
omap3 gpmc: functionality enhancement
omap3 nand: cleanup virtual address usages
omap3 nand: fix issue in board file to detect nand
omap3 flash: rename board-sdp-flash.c to be use by other boards
omap3: add support for NAND on zoom2 board
omap3: add support for NAND on zoom3 board
omap-3630-sdp : Add support for Flash
omap3: add support for NAND on LDP board
Thomas Weber (10):
OMAP2: Devkit8000: Cleanup for power supplies
OMAP2: Devkit8000: change panel to generic panel
OMAP2: Devkit8000: Remove unneeded VDVI supply
OMAP2: Devkit8000: Remove non existing vsim supply
OMAP2: Devkit8000: Remove en-/disable for tv panel
OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
OMAP2: Devkit8000: Using gpio_is_valid macro
OMAP2: Devkit8000: Remove unused omap_board_config
OMAP2: Devkit8000: Fix regulator for power supply
OMAP2: powerdomain: Add break in switch statement
Tony Lindgren (33):
Merge branch 'v2.6.35-rc3-iommu-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus
omap: Separate out omap2 FS USB platform init functions
omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
omap: Enable interface clock for omap2 FS USB
omap: Move omap1 USB platform init code into mach-omap1/usb.c
omap: mux: Fix omap_mux_init_gpio for omap24xx
omap: mux: Renumber package defines to make room for older 24xx packages
omap: mux: Allow compiling in new mux code on all mach-omap2 systems
omap: mux: Remove unncessary parens from mux34xx.c
omap: mux: Add data for 2420
omap: mux: Add data for 2430
omap: mux: Select SIP package for H4
omap: mux: Select POP package for Apollon
omap: mux: Select POP package for N8X0
omap: mux: Select POP package for 2430SDP
omap: mux: Make omap2 FS USB code use new mux functions
omap: mux: Do keypad muxing in board-*.c files
omap: mux: Mux Apollon LCD power in board-apollon.c
omap: mux: Mux 2430 USB0HS_STP in board-2430.c
omap: mux: Convert 2420 platform init code to use new mux code
omap: mux: Remove old mux code
ARM: Disable VGA console for ARM in most cases
omap: Use 32KiHZ timer by default
omap: Make omap specific features appear under Kconfig menu
omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
omap2/3/4: Select all omaps and boards by default
omap2/3/4: Add Kconfig option to compile in typical omap features
omap: Add back UART MDR1 check into uncompress.h
omap2: Fix GPIO numbers and smc91x for 2430sdp
Merge branch 'devel-misc' into omap-for-linus
Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linus
Merge branch 'devel-map-io' into omap-for-linus
Merge branch 'v2.6.35-omap-mailbox-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus
Vincent Sanders (1):
Remove ARM default configurations which duplicate omap3_defconfig
stanley.miao (1):
OMAP3: AM3505/3517 do not have IO wakeup capability
arch/arm/configs/am3517_evm_defconfig | 127 ----
arch/arm/configs/cm_t35_defconfig | 157 ----
arch/arm/configs/devkit8000_defconfig | 184 -----
arch/arm/configs/igep0020_defconfig | 179 -----
arch/arm/configs/omap3_beagle_defconfig | 134 ----
arch/arm/configs/omap3_evm_defconfig | 160 ----
arch/arm/configs/omap3_pandora_defconfig | 158 ----
arch/arm/configs/omap3_stalker_lks_defconfig | 150 ----
arch/arm/configs/omap3_touchbook_defconfig | 621 ---------------
arch/arm/configs/omap_2430sdp_defconfig | 136 ----
arch/arm/configs/omap_3430sdp_defconfig | 178 -----
arch/arm/configs/omap_3630sdp_defconfig | 154 ----
arch/arm/configs/omap_apollon_2420_defconfig | 92 ---
arch/arm/configs/omap_h4_2420_defconfig | 107 ---
arch/arm/configs/omap_ldp_defconfig | 135 ----
arch/arm/configs/omap_zoom2_defconfig | 143 ----
arch/arm/configs/omap_zoom3_defconfig | 155 ----
arch/arm/configs/overo_defconfig | 275 -------
arch/arm/configs/rx51_defconfig | 222 ------
arch/arm/mach-omap1/Kconfig | 13 +
arch/arm/mach-omap1/Makefile | 3 +
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-fsample.c | 12 +
arch/arm/mach-omap1/board-generic.c | 4 +-
arch/arm/mach-omap1/board-h2.c | 31 +-
arch/arm/mach-omap1/board-h3.c | 15 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 4 +-
arch/arm/mach-omap1/board-nokia770.c | 136 +----
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 86 +---
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-perseus2.c | 12 +
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/board-voiceblue.c | 2 +-
arch/arm/mach-omap1/clock.c | 22 +-
arch/arm/mach-omap1/clock.h | 2 +-
arch/arm/mach-omap1/clock_data.c | 149 +++-
arch/arm/mach-omap1/devices.c | 72 --
arch/arm/mach-omap1/include/mach/debug-macro.S | 10 +-
arch/arm/mach-omap1/mailbox.c | 55 +-
arch/arm/mach-omap1/mcbsp.c | 3 -
arch/arm/mach-omap1/mux.c | 6 +-
arch/arm/mach-omap1/serial.c | 7 +
arch/arm/mach-omap1/usb.c | 530 +++++++++++++
arch/arm/mach-omap2/Kconfig | 89 +++
arch/arm/mach-omap2/Makefile | 23 +-
arch/arm/mach-omap2/board-2430sdp.c | 23 +-
arch/arm/mach-omap2/board-3430sdp.c | 24 +-
arch/arm/mach-omap2/board-3630sdp.c | 129 +++-
arch/arm/mach-omap2/board-4430sdp.c | 70 ++-
arch/arm/mach-omap2/board-am3517evm.c | 8 +-
arch/arm/mach-omap2/board-apollon.c | 30 +-
arch/arm/mach-omap2/board-cm-t35.c | 28 +-
arch/arm/mach-omap2/board-devkit8000.c | 169 ++---
.../{board-sdp-flash.c => board-flash.c} | 93 +--
arch/arm/mach-omap2/board-generic.c | 1 -
arch/arm/mach-omap2/board-h4.c | 60 +-
arch/arm/mach-omap2/board-igep0020.c | 8 +-
arch/arm/mach-omap2/board-ldp.c | 43 +-
arch/arm/mach-omap2/board-n8x0.c | 11 +
arch/arm/mach-omap2/board-omap3beagle.c | 32 +-
arch/arm/mach-omap2/board-omap3evm.c | 8 +-
arch/arm/mach-omap2/board-omap3pandora.c | 156 ++++-
arch/arm/mach-omap2/board-omap3stalker.c | 8 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 33 +-
arch/arm/mach-omap2/board-omap4panda.c | 304 ++++++++
arch/arm/mach-omap2/board-overo.c | 74 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 78 ++-
arch/arm/mach-omap2/board-rx51-video.c | 1 -
arch/arm/mach-omap2/board-rx51.c | 2 +-
arch/arm/mach-omap2/board-zoom2.c | 64 ++-
arch/arm/mach-omap2/board-zoom3.c | 64 ++-
arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
arch/arm/mach-omap2/cm.c | 6 +-
arch/arm/mach-omap2/devices.c | 88 +--
arch/arm/mach-omap2/gpmc-nand.c | 37 +-
arch/arm/mach-omap2/gpmc.c | 284 +++++++-
arch/arm/mach-omap2/i2c.c | 27 +-
arch/arm/mach-omap2/id.c | 64 ++-
.../include/mach/{board-sdp.h => board-flash.h} | 9 +-
arch/arm/mach-omap2/include/mach/board-zoom.h | 6 +
arch/arm/mach-omap2/include/mach/debug-macro.S | 29 +-
arch/arm/mach-omap2/include/mach/id.h | 22 +
arch/arm/mach-omap2/include/mach/omap4-common.h | 7 +
arch/arm/mach-omap2/io.c | 13 +-
arch/arm/mach-omap2/iommu2.c | 44 +-
arch/arm/mach-omap2/mailbox.c | 182 ++---
arch/arm/mach-omap2/mcbsp.c | 13 +-
arch/arm/mach-omap2/mux.c | 338 +--------
arch/arm/mach-omap2/mux.h | 28 +-
arch/arm/mach-omap2/mux2420.c | 688 +++++++++++++++++
arch/arm/mach-omap2/mux2420.h | 282 +++++++
arch/arm/mach-omap2/mux2430.c | 791 ++++++++++++++++++++
arch/arm/mach-omap2/mux2430.h | 370 +++++++++
arch/arm/mach-omap2/mux34xx.c | 8 +-
arch/arm/mach-omap2/omap-headsmp.S | 16 -
arch/arm/mach-omap2/omap-hotplug.c | 79 ++
arch/arm/mach-omap2/omap-iommu.c | 2 +-
arch/arm/mach-omap2/omap-smp.c | 3 +-
arch/arm/mach-omap2/omap44xx-smc.S | 25 +
arch/arm/mach-omap2/omap_hwmod.c | 106 ++-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 ++-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 ++-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 ++-
arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
arch/arm/mach-omap2/pm.c | 84 ++
arch/arm/mach-omap2/pm24xx.c | 1 -
arch/arm/mach-omap2/pm34xx.c | 7 +-
arch/arm/mach-omap2/pm44xx.c | 135 ++++
arch/arm/mach-omap2/powerdomain.c | 1 +
arch/arm/mach-omap2/powerdomains34xx.h | 12 +-
arch/arm/mach-omap2/serial.c | 80 ++-
arch/arm/mach-omap2/usb-ehci.c | 1 -
arch/arm/mach-omap2/usb-fs.c | 359 +++++++++
arch/arm/mach-omap2/usb-musb.c | 1 -
arch/arm/mach-omap2/usb-tusb6010.c | 14 +-
arch/arm/plat-omap/Kconfig | 33 +-
arch/arm/plat-omap/Makefile | 1 +
arch/arm/plat-omap/common.c | 10 +-
arch/arm/plat-omap/debug-leds.c | 2 +-
arch/arm/plat-omap/devices.c | 124 ---
arch/arm/plat-omap/dma.c | 11 +-
arch/arm/plat-omap/gpio.c | 4 +-
arch/arm/plat-omap/i2c.c | 12 +-
arch/arm/plat-omap/include/plat/board.h | 8 +
arch/arm/plat-omap/include/plat/clock.h | 130 +++-
arch/arm/plat-omap/include/plat/common.h | 9 +-
arch/arm/plat-omap/include/plat/cpu.h | 17 +-
arch/arm/plat-omap/include/plat/dma.h | 1 +
arch/arm/plat-omap/include/plat/dsp_common.h | 40 -
arch/arm/plat-omap/include/plat/gpmc.h | 42 +-
arch/arm/plat-omap/include/plat/iommu.h | 2 +
arch/arm/plat-omap/include/plat/mailbox.h | 20 +-
arch/arm/plat-omap/include/plat/mux.h | 224 +------
arch/arm/plat-omap/include/plat/nand.h | 6 +-
arch/arm/plat-omap/include/plat/omap-pm.h | 130 +++-
arch/arm/plat-omap/include/plat/omap_device.h | 2 +
arch/arm/plat-omap/include/plat/omap_hwmod.h | 14 +-
arch/arm/plat-omap/include/plat/smp.h | 1 +
arch/arm/plat-omap/include/plat/uncompress.h | 6 +
arch/arm/plat-omap/include/plat/usb.h | 49 ++-
arch/arm/plat-omap/iommu.c | 27 +-
arch/arm/plat-omap/iopgtable.h | 8 +-
arch/arm/plat-omap/mailbox.c | 248 +++----
arch/arm/plat-omap/mux.c | 2 +-
arch/arm/plat-omap/omap-pm-noop.c | 61 ++-
arch/arm/plat-omap/omap_device.c | 37 +-
arch/arm/plat-omap/usb.c | 644 +----------------
drivers/mtd/nand/omap2.c | 218 ++----
drivers/video/console/Kconfig | 2 +-
drivers/video/omap/lcd_apollon.c | 3 -
154 files changed, 6420 insertions(+), 6534 deletions(-)
delete mode 100644 arch/arm/configs/am3517_evm_defconfig
delete mode 100644 arch/arm/configs/cm_t35_defconfig
delete mode 100644 arch/arm/configs/devkit8000_defconfig
delete mode 100644 arch/arm/configs/igep0020_defconfig
delete mode 100644 arch/arm/configs/omap3_beagle_defconfig
delete mode 100644 arch/arm/configs/omap3_evm_defconfig
delete mode 100644 arch/arm/configs/omap3_pandora_defconfig
delete mode 100644 arch/arm/configs/omap3_stalker_lks_defconfig
delete mode 100644 arch/arm/configs/omap3_touchbook_defconfig
delete mode 100644 arch/arm/configs/omap_2430sdp_defconfig
delete mode 100644 arch/arm/configs/omap_3430sdp_defconfig
delete mode 100644 arch/arm/configs/omap_3630sdp_defconfig
delete mode 100644 arch/arm/configs/omap_apollon_2420_defconfig
delete mode 100644 arch/arm/configs/omap_h4_2420_defconfig
delete mode 100644 arch/arm/configs/omap_ldp_defconfig
delete mode 100644 arch/arm/configs/omap_zoom2_defconfig
delete mode 100644 arch/arm/configs/omap_zoom3_defconfig
delete mode 100644 arch/arm/configs/overo_defconfig
delete mode 100644 arch/arm/configs/rx51_defconfig
create mode 100644 arch/arm/mach-omap1/usb.c
rename arch/arm/mach-omap2/{board-sdp-flash.c => board-flash.c} (66%)
create mode 100644 arch/arm/mach-omap2/board-omap4panda.c
rename arch/arm/mach-omap2/include/mach/{board-sdp.h => board-flash.h} (71%)
create mode 100644 arch/arm/mach-omap2/include/mach/id.h
create mode 100644 arch/arm/mach-omap2/mux2420.c
create mode 100644 arch/arm/mach-omap2/mux2420.h
create mode 100644 arch/arm/mach-omap2/mux2430.c
create mode 100644 arch/arm/mach-omap2/mux2430.h
create mode 100644 arch/arm/mach-omap2/omap-hotplug.c
create mode 100644 arch/arm/mach-omap2/pm.c
create mode 100644 arch/arm/mach-omap2/pm44xx.c
create mode 100644 arch/arm/mach-omap2/usb-fs.c
delete mode 100644 arch/arm/plat-omap/include/plat/dsp_common.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists