| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20100806192117.341144731@clark.site>
Date: Fri, 06 Aug 2010 12:20:13 -0700
From: Greg KH <gregkh@...e.de>
To: linux-kernel@...r.kernel.org, stable@...nel.org
Cc: stable-review@...nel.org, torvalds@...ux-foundation.org,
akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
Larry Finger <Larry.Finger@...inger.net>,
Ben Hutchings <ben@...adent.org.uk>
Subject: [32/36] Revert "ssb: Handle Netbook devices where the SPROM address is changed"
2.6.34-stable review patch. If anyone has any objections, please let us know.
------------------
From: Greg Kroah-Hartman <gregkh@...e.de>
Turns out this isn't the best way to resolve this issue. The
individual patches will be applied instead.
Cc: Larry Finger <Larry.Finger@...inger.net>
Cc: Ben Hutchings <ben@...adent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/ssb/driver_chipcommon.c | 3 -
drivers/ssb/driver_chipcommon_pmu.c | 17 ++++++-----
drivers/ssb/pci.c | 46 +++---------------------------
drivers/ssb/sprom.c | 15 ---------
include/linux/ssb/ssb.h | 1
include/linux/ssb/ssb_driver_chipcommon.h | 2 -
include/linux/ssb/ssb_regs.h | 3 -
7 files changed, 17 insertions(+), 70 deletions(-)
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -233,9 +233,6 @@ void ssb_chipcommon_init(struct ssb_chip
{
if (!cc->dev)
return; /* We don't have a ChipCommon */
- if (cc->dev->id.revision >= 11)
- cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -502,9 +502,9 @@ static void ssb_pmu_resources_init(struc
chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
}
-/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
void ssb_pmu_init(struct ssb_chipcommon *cc)
{
+ struct ssb_bus *bus = cc->dev->bus;
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
@@ -516,12 +516,15 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
- if (cc->pmu.rev == 1)
- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
- ~SSB_CHIPCO_PMU_CTL_NOILPONW);
- else
- chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
- SSB_CHIPCO_PMU_CTL_NOILPONW);
+ if (cc->pmu.rev >= 1) {
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+ } else {
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+ SSB_CHIPCO_PMU_CTL_NOILPONW);
+ }
+ }
ssb_pmu_pll_init(cc);
ssb_pmu_resources_init(cc);
}
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -23,7 +23,6 @@
#include "ssb_private.h"
-bool ssb_is_sprom_available(struct ssb_bus *bus);
/* Define the following to 1 to enable a printk on each coreswitch. */
#define SSB_VERBOSE_PCICORESWITCH_DEBUG 0
@@ -169,7 +168,7 @@ err_pci:
}
/* Get the word-offset for a SSB_SPROM_XXX define. */
-#define SPOFF(offset) ((offset) / sizeof(u16))
+#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
#define SPEX16(_outvar, _offset, _mask, _shift) \
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
@@ -254,13 +253,8 @@ static int sprom_do_read(struct ssb_bus
{
int i;
- /* Check if SPROM can be read */
- if (ioread16(bus->mmio + bus->sprom_offset) == 0xFFFF) {
- ssb_printk(KERN_ERR PFX "Unable to read SPROM\n");
- return -ENODEV;
- }
for (i = 0; i < bus->sprom_size; i++)
- sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+ sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
return 0;
}
@@ -291,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
ssb_printk("75%%");
else if (i % 2)
ssb_printk(".");
- writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
mmiowb();
msleep(20);
}
@@ -627,49 +621,21 @@ static int ssb_pci_sprom_get(struct ssb_
int err = -ENOMEM;
u16 *buf;
- if (!ssb_is_sprom_available(bus)) {
- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
- return -ENODEV;
- }
- if (bus->chipco.dev) { /* can be unavailible! */
- /*
- * get SPROM offset: SSB_SPROM_BASE1 except for
- * chipcommon rev >= 31 or chip ID is 0x4312 and
- * chipcommon status & 3 == 2
- */
- if (bus->chipco.dev->id.revision >= 31)
- bus->sprom_offset = SSB_SPROM_BASE31;
- else if (bus->chip_id == 0x4312 &&
- (bus->chipco.status & 0x03) == 2)
- bus->sprom_offset = SSB_SPROM_BASE31;
- else
- bus->sprom_offset = SSB_SPROM_BASE1;
- } else {
- bus->sprom_offset = SSB_SPROM_BASE1;
- }
- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
-
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
goto out;
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
- err = sprom_do_read(bus, buf);
- if (err)
- goto out_free;
+ sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
if (err) {
/* try for a 440 byte SPROM - revision 4 and higher */
kfree(buf);
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
- if (!buf) {
- err = -ENOMEM;
+ if (!buf)
goto out;
- }
bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
- err = sprom_do_read(bus, buf);
- if (err)
- goto out_free;
+ sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
if (err) {
/* All CRC attempts failed.
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -176,18 +176,3 @@ const struct ssb_sprom *ssb_get_fallback
{
return fallback_sprom;
}
-
-/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
-bool ssb_is_sprom_available(struct ssb_bus *bus)
-{
- /* status register only exists on chipcomon rev >= 11 and we need check
- for >= 31 only */
- /* this routine differs from specs as we do not access SPROM directly
- on PCMCIA */
- if (bus->bustype == SSB_BUSTYPE_PCI &&
- bus->chipco.dev && /* can be unavailible! */
- bus->chipco.dev->id.revision >= 31)
- return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
-
- return true;
-}
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -306,7 +306,6 @@ struct ssb_bus {
u16 chip_id;
u16 chip_rev;
u16 sprom_size; /* number of words in sprom */
- u16 sprom_offset;
u8 chip_package;
/* List of devices (cores) on the backplane. */
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -46,7 +46,6 @@
#define SSB_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
#define SSB_CHIPCO_CAP_PCTL 0x00040000 /* Power Control */
#define SSB_CHIPCO_CAP_OTPS 0x00380000 /* OTP size */
-#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
#define SSB_CHIPCO_CAP_OTPS_SHIFT 19
#define SSB_CHIPCO_CAP_OTPS_BASE 5
#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
@@ -565,7 +564,6 @@ struct ssb_chipcommon_pmu {
struct ssb_chipcommon {
struct ssb_device *dev;
u32 capabilities;
- u32 status;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct ssb_chipcommon_pmu pmu;
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -170,8 +170,7 @@
#define SSB_SPROMSIZE_WORDS_R4 220
#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-#define SSB_SPROM_BASE1 0x1000
-#define SSB_SPROM_BASE31 0x0800
+#define SSB_SPROM_BASE 0x1000
#define SSB_SPROM_REVISION 0x107E
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists