linux-kernel - [18/36] ath9k: fix TSF after reset on AR913x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20100806192116.015078921@clark.site>
Date:	Fri, 06 Aug 2010 12:19:59 -0700
From:	Greg KH <gregkh@...e.de>
To:	linux-kernel@...r.kernel.org, stable@...nel.org
Cc:	stable-review@...nel.org, torvalds@...ux-foundation.org,
	akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
	Felix Fietkau <nbd@...nwrt.org>,
	"John W. Linville" <linville@...driver.com>
Subject: [18/36] ath9k: fix TSF after reset on AR913x

2.6.34-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Felix Fietkau <nbd@...nwrt.org>

commit f860d526eb2939a1c37128900b5af2b6f3ff7f20 upstream.

When issuing a reset, the TSF value is lost in the hardware because of
the 913x specific cold reset. As with some AR9280 cards, the TSF needs
to be preserved in software here.

Additionally, there's an issue that frequently prevents a successful
TSF write directly after the chip reset. In this case, repeating the
TSF write after the initval-writes usually works.

This patch detects failed TSF writes and recovers from them, taking
into account the delay caused by the initval writes.

Signed-off-by: Felix Fietkau <nbd@...nwrt.org>
Reported-by: Björn Smedman <bjorn.smedman@...atech.se>
Signed-off-by: John W. Linville <linville@...driver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>

---
 drivers/net/wireless/ath/ath9k/hw.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1956,7 +1956,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
 	macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
 
 	/* For chips on which RTC reset is done, save TSF before it gets cleared */
-	if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+	if (AR_SREV_9100(ah) ||
+	    (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)))
 		tsf = ath9k_hw_gettsf64(ah);
 
 	saveLedState = REG_READ(ah, AR_CFG_LED) &
@@ -1986,7 +1987,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
 	}
 
 	/* Restore TSF */
-	if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+	if (tsf)
 		ath9k_hw_settsf64(ah, tsf);
 
 	if (AR_SREV_9280_10_OR_LATER(ah))
@@ -2006,6 +2007,17 @@ int ath9k_hw_reset(struct ath_hw *ah, st
 	if (r)
 		return r;
 
+	/*
+	 * Some AR91xx SoC devices frequently fail to accept TSF writes
+	 * right after the chip reset. When that happens, write a new
+	 * value after the initvals have been applied, with an offset
+	 * based on measured time difference
+	 */
+	if (AR_SREV_9100(ah) && (ath9k_hw_gettsf64(ah) < tsf)) {
+		tsf += 1500;
+		ath9k_hw_settsf64(ah, tsf);
+	}
+
 	/* Setup MFP options for CCMP */
 	if (AR_SREV_9280_20_OR_LATER(ah)) {
 		/* Mask Retry(b11), PwrMgt(b12), MoreData(b13) to 0 in mgmt


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/