[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100809161200.GC3026@linux.vnet.ibm.com>
Date: Mon, 9 Aug 2010 09:12:00 -0700
From: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To: Subrata Modak <subrata@...ux.vnet.ibm.com>
Cc: linux-kernel <linux-kernel@...r.kernel.org>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Li Zefan <lizf@...fujitsu.com>,
Linuxppc-dev <Linuxppc-dev@...abs.org>,
sachinp <sachinp@...ux.vnet.ibm.com>,
DIVYA PRAKASH <dipraksh@...ux.vnet.ibm.com>
Subject: Re: 2.6.35-stable/ppc64/p7: suspicious rcu_dereference_check()
usage detected during 2.6.35-stable boot
On Mon, Aug 02, 2010 at 02:22:12PM +0530, Subrata Modak wrote:
> Hi,
>
> The following suspicious rcu_dereference_check() usage is detected
> during 2.6.35-stable boot on my ppc64/p7 machine:
>
> ==================================================
> [ INFO: suspicious rcu_dereference_check() usage. ]
> ---------------------------------------------------
> kernel/sched.c:616 invoked rcu_dereference_check() without protection!
> other info that might help us debug this:
>
> rcu_scheduler_active = 1, debug_locks = 0
> 1 lock held by swapper/1:
> #0: (&rq->lock){-.....}, at: [<c0000000007ca2f8>] .init_idle+0x78/0x4a8
> stack backtrace:
> Call Trace:
> [c000000f392bf990] [c000000000014f04] .show_stack+0xb0/0x1a0 (unreliable)
> [c000000f392bfa50] [c0000000007c87b4] .dump_stack+0x28/0x3c
> [c000000f392bfad0] [c000000000103e1c] .lockdep_rcu_dereference+0xbc/0xe4
> [c000000f392bfb70] [c0000000007ca434] .init_idle+0x1b4/0x4a8
> [c000000f392bfc30] [c0000000007cad04] .fork_idle+0xa4/0xd0
> [c000000f392bfe30] [c000000000aefaac] .smp_prepare_cpus+0x23c/0x2f4
> [c000000f392bfed0] [c000000000ae1424] .kernel_init+0xec/0x32c
> [c000000f392bff90] [c000000000033f40] .kernel_thread+0x54/0x70
> ==================================================
>
> Please note that this was reported earlier on 2.6.34-rc6:
> http://marc.info/?l=linux-kernel&m=127313031922395&w=2,
> The issue was fixed with:
> commit 1ce7e4ff24fe338438bc7837e02780f202bf202b
> Author: Li Zefan <lizf@...fujitsu.com>
> Date: Fri Apr 23 10:35:52 2010 +0800
> cgroup: Check task_lock in task_subsys_state()
>
> According to:
> http://lkml.org/lkml/2010/7/1/883,
> commit dc61b1d65e353d638b2445f71fb8e5b5630f2415
> Author: Peter Zijlstra <a.p.zijlstra@...llo.nl>
> Date: Tue Jun 8 11:40:42 2010 +0200
> sched: Fix PROVE_RCU vs cpu_cgroup
> should have fixed this. But this is reproducible on 2.6.35-stable.
>
> Please also see the config file attached.
Hello, Subrata,
Thank you for locating this one! This looks like the same issue that
Ilia Mirkin located. Please see below for my analysis -- no fix yet,
as I need confirmation from cgroups experts. I can easily create a
patch that suppresses the warning, but I don't yet know whether this is
the right thing to do.
Thanx, Paul
------------------------------------------------------------------------
On Thu, Aug 05, 2010 at 01:31:10PM -0400, Ilia Mirkin wrote:
> On Thu, Jul 1, 2010 at 6:18 PM, Paul E. McKenney
> <paulmck@...ux.vnet.ibm.com> wrote:
> > On Thu, Jul 01, 2010 at 08:21:43AM -0400, Miles Lane wrote:
> >> [ INFO: suspicious rcu_dereference_check() usage. ]
> >> ---------------------------------------------------
> >> kernel/sched.c:616 invoked rcu_dereference_check() without protection!
> >>
> >> other info that might help us debug this:
> >>
> >> rcu_scheduler_active = 1, debug_locks = 1
> >> 3 locks held by swapper/1:
> >> #0: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81042914>]
> >> cpu_maps_update_begin+0x12/0x14
> >> #1: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8104294f>]
> >> cpu_hotplug_begin+0x27/0x4e
> >> #2: (&rq->lock){-.-...}, at: [<ffffffff812f8502>] init_idle+0x2b/0x114
> >
> > Hello, Miles!
> >
> > I believe that this one is fixed by commit dc61b1d6 in -tip.
>
> Hi Paul,
>
> Looks like that commit made it into 2.6.35:
>
> git tag -l --contains dc61b1d65e353d638b2445f71fb8e5b5630f2415 v2.6.35*
> v2.6.35
> v2.6.35-rc4
> v2.6.35-rc5
> v2.6.35-rc6
>
> However I still get:
>
> [ 0.051203] CPU0: AMD QEMU Virtual CPU version 0.12.4 stepping 03
> [ 0.052999] lockdep: fixing up alternatives.
> [ 0.054105]
> [ 0.054106] ===================================================
> [ 0.054999] [ INFO: suspicious rcu_dereference_check() usage. ]
> [ 0.054999] ---------------------------------------------------
> [ 0.054999] kernel/sched.c:616 invoked rcu_dereference_check()
> without protection
> !
> [ 0.054999]
> [ 0.054999] other info that might help us debug this:
> [ 0.054999]
> [ 0.054999]
> [ 0.054999] rcu_scheduler_active = 1, debug_locks = 1
> [ 0.054999] 3 locks held by swapper/1:
> [ 0.054999] #0: (cpu_add_remove_lock){+.+.+.}, at:
> [<ffffffff814be933>] cpu_up+
> 0x42/0x6a
> [ 0.054999] #1: (cpu_hotplug.lock){+.+.+.}, at:
> [<ffffffff810400d8>] cpu_hotplu
> g_begin+0x2a/0x51
> [ 0.054999] #2: (&rq->lock){-.-...}, at: [<ffffffff814be2f7>]
> init_idle+0x2f/0x
> 113
> [ 0.054999]
> [ 0.054999] stack backtrace:
> [ 0.054999] Pid: 1, comm: swapper Not tainted 2.6.35 #1
> [ 0.054999] Call Trace:
> [ 0.054999] [<ffffffff81068054>] lockdep_rcu_dereference+0x9b/0xa3
> [ 0.054999] [<ffffffff810325c3>] task_group+0x7b/0x8a
> [ 0.054999] [<ffffffff810325e5>] set_task_rq+0x13/0x40
> [ 0.054999] [<ffffffff814be39a>] init_idle+0xd2/0x113
> [ 0.054999] [<ffffffff814be78a>] fork_idle+0xb8/0xc7
> [ 0.054999] [<ffffffff81068717>] ? mark_held_locks+0x4d/0x6b
> [ 0.054999] [<ffffffff814bcebd>] do_fork_idle+0x17/0x2b
> [ 0.054999] [<ffffffff814bc89b>] native_cpu_up+0x1c1/0x724
> [ 0.054999] [<ffffffff814bcea6>] ? do_fork_idle+0x0/0x2b
> [ 0.054999] [<ffffffff814be876>] _cpu_up+0xac/0x127
> [ 0.054999] [<ffffffff814be946>] cpu_up+0x55/0x6a
> [ 0.054999] [<ffffffff81ab562a>] kernel_init+0xe1/0x1ff
> [ 0.054999] [<ffffffff81003854>] kernel_thread_helper+0x4/0x10
> [ 0.054999] [<ffffffff814c353c>] ? restore_args+0x0/0x30
> [ 0.054999] [<ffffffff81ab5549>] ? kernel_init+0x0/0x1ff
> [ 0.054999] [<ffffffff81003850>] ? kernel_thread_helper+0x0/0x10
> [ 0.056074] Booting Node 0, Processors #1lockdep: fixing up alternatives.
> [ 0.130045] #2lockdep: fixing up alternatives.
> [ 0.203089] #3 Ok.
> [ 0.275286] Brought up 4 CPUs
> [ 0.276005] Total of 4 processors activated (16017.17 BogoMIPS).
This does look like a new one, thank you for reporting it!
Here is my analysis, which should at least provide some humor value to
those who understand the code better than I do. ;-)
So the corresponding rcu_dereference_check() is in
task_subsys_state_check(), and is fetching the cpu_cgroup_subsys_id
element of the newly created task's task->cgroups->subsys[] array.
The "git grep" command finds only three uses of cpu_cgroup_subsys_id,
but no definition.
Now, fork_idle() invokes copy_process(), which invokes cgroup_fork(),
which sets the child process's ->cgroups pointer to that of the parent,
also invoking get_css_set(), which increments the corresponding reference
count, doing both operations under task_lock() protection (->alloc_lock).
Because fork_idle() does not specify any of CLONE_NEWNS, CLONE_NEWUTS,
CLONE_NEWIPC, CLONE_NEWPID, or CLONE_NEWNET, copy_namespaces() should
not create a new namespace, and so there should be no ns_cgroup_clone().
We should thus retain the parent's ->cgroups pointer. And copy_process()
installs the new task in the various lists, so that the task is externally
accessible upon return.
After a non-error return from copy_process(), fork_init() invokes
init_idle_pid(), which does not appear to affect the task's cgroup
state. Next fork_init() invokes init_idle(), which in turn invokes
__set_task_cpu(), which invokes set_task_rq(), which calls task_group()
several times, which calls task_subsys_state_check(), which calls the
rcu_dereference_check() that complained above.
However, the result returns by rcu_dereference_check() is stored into
the task structure:
p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
p->se.parent = task_group(p)->se[cpu];
This means that the corresponding structure must have been tied down with
a reference count or some such. If such a reference has been taken, then
this complaint is a false positive, and could be suppressed by putting
rcu_read_lock() and rcu_read_unlock() around the call to init_idle()
from fork_idle(). However, although, reference to the enclosing ->cgroups
struct css_set is held, it is not clear to me that this reference applies
to the structures pointed to by the ->subsys[] array, especially given
that the cgroup_subsys_state structures referenced by this array have
their own reference count, which does not appear to me to be acquired
by this code path.
Or are the cgroup_subsys_state structures referenced by idle tasks
never freed or some such?
Thanx, Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists