| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4C626CBF.9020609@evidence.eu.com>
Date: Wed, 11 Aug 2010 11:26:23 +0200
From: Claudio Scordino <claudio@...dence.eu.com>
To: Wolfram Sang <w.sang@...gutronix.de>,
Philippe De Muyter <phdm@...qel.be>,
Linux Kernel <linux-kernel@...r.kernel.org>
CC: Nicolas Ferre <nicolas.ferre@...el.com>,
Alan Cox <alan@...rguk.ukuu.org.uk>, hskinnemoen@...el.com,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Rick Bronson <rick@....org>, John Nicholls <john@...nlinx.com>,
Sebastian Heutling <Sebastian.Heutling@...-ing.de>,
Ryan Mallon <ryan@...ewatersys.com>, rmk@....linux.org.uk,
Bernhard Roth <br@...net.de>,
Konrad Mattheis <mattheis@...a.de>,
Elektrolot <elektrolot@...pl>,
Prchal Jiří <jiri.prchal@...ignal.cz>,
gregkh@...e.de, Andrew Morton <akpm@...ux-foundation.org>
Subject: [PATCH] Documentation about RS485 serial communications
Hi all,
some time ago I've been asked (by both Wolfram and Philippe) to
provide some minimal documentation about the usage of the RS485
interface.
Here is the document (updated with the very last changes in the
interface).
Best regards,
Claudio
Documentation about RS485 serial communications.
Signed-off-by: Claudio Scordino <claudio@...dence.eu.com>
---
Documentation/serial/00-INDEX | 2 +
Documentation/serial/serial-rs485.txt | 123 +++++++++++++++++++++++++++++++++
2 files changed, 125 insertions(+), 0 deletions(-)
create mode 100644 Documentation/serial/serial-rs485.txt
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index 07dcdb0..e09468a 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -14,6 +14,8 @@ riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt
- info on the Comtrol RocketPort multiport serial driver.
+serial-rs485.txt
+ - info about RS485 structures and support in the kernel.
specialix.txt
- info on hardware/driver for specialix IO8+ multiport serial card.
stallion.txt
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
new file mode 100644
index 0000000..f594831
--- /dev/null
+++ b/Documentation/serial/serial-rs485.txt
@@ -0,0 +1,123 @@
+ RS485 SERIAL COMMUNICATIONS
+
+1. INTRODUCTION
+
+ EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the
+ electrical characteristics of drivers and receivers for use in balanced
+ digital multipoint systems.
+ This standard is widely used for communications in industrial automation
+ because it can be used effectively over long distances and in electrically
+ noisy environments.
+ Even though the data is transmitted over a 2-wire twisted pair bus, all
+ EIA-485 transceivers interpret the voltage levels of the differential
+ signals with respect to a third common voltage. Without this common
+ reference, a set of transceivers may interpret the differential signals
+ incorrectly.
+ See [1] for more information.
+
+
+2. HARDWARE-RELATED CONSIDERATIONS
+
+ Some CPUs (e.g., Atmel AT91) contain a transceiver capable of working both
+ as RS232 and RS485. For these microcontrollers, the Linux driver should be
+ able of working in both modes, and proper ioctls (see later) should be made
+ available at user-level to allow switching from one mode to the other, and
+ viceversa.
+
+ On some other CPUs (e.g., Freescale imx25) the RS485 transceiver is not
+ integrated inside the microcontroller itself. Therefore, manufacturers who
+ use these microcontrollers to produce embedded boards need to connect an
+ external transceiver to some pin of the CPU.
+ On these architectures, therefore, no assumptions can be done at the
+ CPU-level about the presence of a RS485 transceiver, because the connection
+ (if any) is done outside the microcontroller. Moreover, even in case of
+ RS485 transceiver, the manufacturer is free to choose the CPU pin used for
+ the connection.
+
+
+3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+
+ The Linux kernel provides the serial_rs485 structure (see [2]) to handle
+ RS485 communications. This data structure is used to set and configure RS485
+ parameters in the platform data and in ioctls.
+
+ Any driver for devices capable of working both as RS232 and RS485 should
+ provide at least the following ioctls:
+
+ - TIOCSRS485 (typically associated with number 0x542F). This ioctl is used
+ to enable/disable RS485 mode from user-space
+
+ - TIOCGRS485 (typically associated with number 0x542E). This ioctl is used
+ to get RS485 mode from kernel-space (i.e., driver) to user-space.
+
+ In other words, the serial driver should contain a code similar to the next
+ one:
+
+ static struct uart_ops atmel_pops = {
+ /* ... */
+ .ioctl = handle_ioctl,
+ };
+
+ static int handle_ioctl(struct uart_port *port,
+ unsigned int cmd,
+ unsigned long arg)
+ {
+ struct serial_rs485 rs485conf;
+
+ switch (cmd) {
+ case TIOCSRS485:
+ if (copy_from_user(&rs485conf,
+ (struct serial_rs485 *) arg,
+ sizeof(rs485conf)))
+ return -EFAULT;
+
+ /* ... */
+ break;
+
+ case TIOCGRS485:
+ if (copy_to_user((struct serial_rs485 *) arg,
+ ...,
+ sizeof(rs485conf)))
+ return -EFAULT;
+ /* ... */
+ break;
+
+ /* ... */
+ }
+ }
+
+
+4. USAGE FROM USER-LEVEL
+
+ From user-level, RS485 configuration can be get/set using the previous
+ ioctls. For instance, to set RS485 you can use the following code:
+
+ #include <linux/serial.h>
+
+ /* Driver-specific ioctls: */
+ #define TIOCGRS485 0x542E
+ #define TIOCSRS485 0x542F
+
+ /* Open specific device: */
+ int fd = open ("/dev/mydevice", O_RDWR);
+ struct serial_rs485 rs485conf;
+
+ /* Set RS485 mode: */
+ rs485conf.flags |= SER_RS485_ENABLED;
+
+ /* Set rts delay before send, if needed: */
+ rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
+ rs485conf.delay_rts_before_send = ...;
+
+ /* Set rts delay after send, if needed: */
+ rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+ rs485conf.delay_rts_after_send = ...;
+
+ ioctl (fd, TIOCSRS485, &rs485conf);
+
+ close (fd);
+
+5. REFERENCES
+
+ [1] http://en.wikipedia.org/wiki/Rs485
+ [2] include/linux/serial.h
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists