[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <77A0A4DB5BF2A44283E5522C27234AC6021C82BC@EDPRSRV011.logicpd.com>
Date: Wed, 11 Aug 2010 13:47:24 -0500
From: "Jacob Tanenbaum" <Jacob.Tanenbaum@...icpd.com>
To: <felipe.balbi@...ia.com>
Cc: <linux@....linux.org.uk>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <rmk@....linux.org.uk>,
<tony@...mide.com>
Subject: RE: [PATCH 2/4] Low-level initialization for hsmmc controller on LogicPD's OMAP3 SOM and TORPEDO dev kits
-----Original Message-----
From: Felipe Balbi [mailto:felipe.balbi@...ia.com]
Sent: Wednesday, August 11, 2010 1:26 PM
To: Jacob Tanenbaum
Cc: linux@....linux.org.uk; linux-omap@...r.kernel.org;
linux-kernel@...r.kernel.org; rmk@....linux.org.uk; tony@...mide.com
Subject: Re: [PATCH 2/4] Low-level initialization for hsmmc controller
on LogicPD's OMAP3 SOM and TORPEDO dev kits
Hi,
On Wed, Aug 11, 2010 at 06:31:35PM +0200, ext Jacob Tanenbaum wrote:
>+#define OMAP3_TORPEDO_MMC_GPIO_WP (-EINVAL)
this one isn't used anywhere, why adding it ?
will fix
>+static struct regulator_init_data omap3logic_vmmc1 = {
>+ .constraints = {
>+ .name = "VMMC1",
>+ .min_uV = 1850000,
>+ .max_uV = 3150000,
>+ .valid_modes_mask = REGULATOR_MODE_NORMAL
>+ | REGULATOR_MODE_STANDBY,
>+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
>+ | REGULATOR_CHANGE_MODE
>+ | REGULATOR_CHANGE_STATUS,
>+ },
>+ .num_consumer_supplies = 1,
>+ .consumer_supplies = &omap3logic_vmmc1_supply,
>+};
>+
>+
>+
one blank line only.
Will fix
>+ } else {
>+ printk(KERN_ERR "%s(): unknown machine type\n",
__func__);
>+ return;
indentation is wrong.
Will fix
>+ omap2_hsmmc_init(board_mmc_info);
>+ /* link regulators to MMC adapters */
>+ omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
>+}
>+
>+
>+
one blank line only.
Will fix
> /* Ensure SDRC pins are mux'd for self-refresh */
>-/* omap_cfg_reg(H16_34XX_SDRC_CKE0);
>- omap_cfg_reg(H17_34XX_SDRC_CKE1);
>- omap_cfg_reg(SDRC_CKE0);
>- omap_cfg_reg(SDRC_CKE1); */
this shouldn't even be here in the first place. :-)
I removed this code and made a mistake in the rebase, it is removed in
patch 4 will fix
--
balbi
DefectiveByDesign.org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists