| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1281712686-31308-4-git-send-email-alexandre.bounine@idt.com>
Date: Fri, 13 Aug 2010 11:18:00 -0400
From: Alexandre Bounine <alexandre.bounine@....com>
To: akpm@...ux-foundation.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...abs.org
Cc: Alexandre Bounine <alexandre.bounine@....com>,
Matt Porter <mporter@...nel.crashing.org>,
Li Yang <leoli@...escale.com>,
Kumar Gala <galak@...nel.crashing.org>
Subject: [PATCH 3/9] RapidIO: Add the ingress port number into the RIO switch data structure
A switch ingress port number has to be saved for software assisted error
recovery from the error-stopped state. Saving this information also allows
to remove several register reads from the RIO enumeration process.
Signed-off-by: Alexandre Bounine <alexandre.bounine@....com>
Reviewed-by: Thomas Moll <thomas.moll@...go.com>
Cc: Matt Porter <mporter@...nel.crashing.org>
Cc: Li Yang <leoli@...escale.com>
Cc: Kumar Gala <galak@...nel.crashing.org>
---
drivers/rapidio/rio-scan.c | 38 ++++++++------------------------------
include/linux/rio.h | 4 ++--
2 files changed, 10 insertions(+), 32 deletions(-)
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 1123be8..efe3519 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -389,6 +389,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
int ret = 0;
struct rio_dev *rdev;
struct rio_switch *rswitch = NULL;
+ u32 swpinfo;
int result, rdid;
rdev = kzalloc(sizeof(struct rio_dev), GFP_KERNEL);
@@ -440,7 +441,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
/* If a PE has both switch and other functions, show it as a switch */
if (rio_is_switch(rdev)) {
rio_mport_read_config_32(port, destid, hopcount,
- RIO_SWP_INFO_CAR, &rdev->swpinfo);
+ RIO_SWP_INFO_CAR, &swpinfo);
rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
if (!rswitch)
goto cleanup;
@@ -448,6 +449,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
rswitch->hopcount = hopcount;
rswitch->destid = destid;
rswitch->port_ok = 0;
+ rswitch->inport = (u8)(swpinfo & RIO_SWP_INFO_PORT_NUM_MASK);
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
@@ -719,25 +721,6 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
}
/**
- * rio_get_swpinfo_inport- Gets the ingress port number
- * @mport: Master port to send transaction
- * @destid: Destination ID associated with the switch
- * @hopcount: Number of hops to the device
- *
- * Returns port number being used to access the switch device.
- */
-static u8
-rio_get_swpinfo_inport(struct rio_mport *mport, u16 destid, u8 hopcount)
-{
- u32 result;
-
- rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
- &result);
-
- return (u8) (result & 0xff);
-}
-
-/**
* rio_get_swpinfo_tports- Gets total number of ports on the switch
* @mport: Master port to send transaction
* @destid: Destination ID associated with the switch
@@ -834,8 +817,7 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
if (rio_is_switch(rdev)) {
next_switchid++;
- sw_inport = rio_get_swpinfo_inport(port,
- RIO_ANY_DESTID(port->sys_size), hopcount);
+ sw_inport = rdev->rswitch->inport;
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport, 0);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -989,8 +971,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did, num_ports);
for (port_num = 0; port_num < num_ports; port_num++) {
- if (rio_get_swpinfo_inport(port, destid, hopcount) ==
- port_num)
+ if (rdev->rswitch->inport == port_num)
continue;
if (rio_sport_is_active
@@ -1092,7 +1073,6 @@ static void rio_update_route_tables(struct rio_mport *port)
{
struct rio_dev *rdev;
struct rio_switch *rswitch;
- u8 sport;
u16 destid;
list_for_each_entry(rdev, &rio_devices, global_list) {
@@ -1109,14 +1089,12 @@ static void rio_update_route_tables(struct rio_mport *port)
if (rswitch->destid == destid)
continue;
- sport = rio_get_swpinfo_inport(port,
- rswitch->destid, rswitch->hopcount);
-
if (rswitch->add_entry) {
rio_route_add_entry(port, rswitch,
RIO_GLOBAL_TABLE, destid,
- sport, 0);
- rswitch->route_table[destid] = sport;
+ rswitch->inport, 0);
+ rswitch->route_table[destid] =
+ rswitch->inport;
}
}
}
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 84c9f8c..718075a 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -86,7 +86,6 @@ union rio_pw_msg;
* @asm_rev: Assembly revision
* @efptr: Extended feature pointer
* @pef: Processing element features
- * @swpinfo: Switch port info
* @src_ops: Source operation capabilities
* @dst_ops: Destination operation capabilities
* @comp_tag: RIO component tag
@@ -112,7 +111,6 @@ struct rio_dev {
u16 asm_rev;
u16 efptr;
u32 pef;
- u32 swpinfo; /* Only used for switches */
u32 src_ops;
u32 dst_ops;
u32 comp_tag;
@@ -222,6 +220,7 @@ struct rio_net {
* @switchid: Switch ID that is unique across a network
* @hopcount: Hopcount to this switch
* @destid: Associated destid in the path
+ * @inport: Switch ingress port number
* @route_table: Copy of switch routing table
* @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
* @add_entry: Callback for switch-specific route add function
@@ -237,6 +236,7 @@ struct rio_switch {
u16 switchid;
u16 hopcount;
u16 destid;
+ u8 inport;
u8 *route_table;
u32 port_ok;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
--
1.7.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists