lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 16 Aug 2010 15:19:47 -0400
From:	Mathieu Desnoyers <mathieu.desnoyers@...ymtl.ca>
To:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
Cc:	linux-kernel@...r.kernel.org, mingo@...e.hu, laijs@...fujitsu.com,
	dipankar@...ibm.com, akpm@...ux-foundation.org,
	josh@...htriplett.org, dvhltc@...ibm.com, niv@...ibm.com,
	tglx@...utronix.de, peterz@...radead.org, rostedt@...dmis.org,
	Valdis.Kletnieks@...edu, dhowells@...hat.com,
	eric.dumazet@...il.com
Subject: Re: [PATCH tip/core/rcu 08/10] rcu: Add a TINY_PREEMPT_RCU

* Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> On Mon, Aug 16, 2010 at 11:07:37AM -0400, Mathieu Desnoyers wrote:
> > * Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> > [...]
> > > +
> > > +/*
> > > + * Tiny-preemptible RCU implementation for rcu_read_unlock().
> > > + * Decrement ->rcu_read_lock_nesting.  If the result is zero (outermost
> > > + * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
> > > + * invoke rcu_read_unlock_special() to clean up after a context switch
> > > + * in an RCU read-side critical section and other special cases.
> > > + */
> > > +void __rcu_read_unlock(void)
> > > +{
> > > +	struct task_struct *t = current;
> > > +
> > > +	barrier();  /* needed if we ever invoke rcu_read_unlock in rcutiny.c */
> > > +	if (--t->rcu_read_lock_nesting == 0 &&
> > > +	    unlikely(t->rcu_read_unlock_special))
> 
> First, thank you for looking this over!!!
> 
> > Hrm I think we discussed this in a past life, but would the following
> > sequence be possible and correct ?
> > 
> > CPU 0
> > 
> > read t->rcu_read_unlock_special
> >   interrupt comes in, preempts. sets t->rcu_read_unlock_special
> >   <preempted>
> >   <scheduled back>
> >   iret
> > decrement and read t->rcu_read_lock_nesting
> > test both old "special" value (which we have locally on the stack) and
> > detect that rcu_read_lock_nesting is 0.
> > 
> > We actually missed a reschedule.
> > 
> > I think we might need a barrier() between the t->rcu_read_lock_nesting
> > and t->rcu_read_unlock_special reads.
> 
> You are correct -- I got too aggressive in eliminating synchronization.
> 
> Good catch!!!
> 
> I added an ACCESS_ONCE() to the second term of the "if" condition so
> that it now reads:
> 
> 	if (--t->rcu_read_lock_nesting == 0 &&
> 	    unlikely((ACCESS_ONCE(t->rcu_read_unlock_special)))
> 
> This prevents the compiler from reordering because the ACCESS_ONCE()
> prohibits accessing t->rcu_read_unlock_special unless the value of
> t->rcu_read_lock_nesting is known to be zero.

Hrm, --t->rcu_read_lock_nesting does not have any globally visible
side-effect, so the compiler is free to reorder the memory access across
the rcu_read_unlock_special access. I think we need the ACCESS_ONCE()
around the t->rcu_read_lock_nesting access too.

> 
> >                                       We might need to audit
> > TREE PREEMPT RCU for the same kind of behavior.
> 
> The version of __rcu_read_unlock() in kernel/rcutree_plugin.h is as
> follows:
> 
> void __rcu_read_unlock(void)
> {
> 	struct task_struct *t = current;
> 
> 	barrier();  /* needed if we ever invoke rcu_read_unlock in rcutree.c */
> 	if (--ACCESS_ONCE(t->rcu_read_lock_nesting) == 0 &&
> 	    unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))

This seem to work because we have:

volatile access (read/update t->rcu_read_lock_nesting)
&& (sequence point)
volatile access (t->rcu_read_unlock_special)

The C standard seems to forbid reordering of volatile accesses across
sequence points, so this should be fine. But it would probably be good
to document this implied ordering explicitly.

> 		rcu_read_unlock_special(t);
> #ifdef CONFIG_PROVE_LOCKING
> 	WARN_ON_ONCE(ACCESS_ONCE(t->rcu_read_lock_nesting) < 0);
> #endif /* #ifdef CONFIG_PROVE_LOCKING */
> }
> 
> The ACCESS_ONCE() calls should cover this.  I believe that the first
> ACCESS_ONCE() is redundant, and have checking this more closely on my
> todo list.

I doubt so, see explanation above.

> 
> > But I might be (again ?) missing something. I've got the feeling you
> > already convinced me that this was OK for some reason, but I trip on
> > this every time I read the code.
> > 
> > [...]
> > 
> > > +/*
> > > + * Check for a task exiting while in a preemptible -RCU read-side
> > > + * critical section, clean up if so.  No need to issue warnings,
> > > + * as debug_check_no_locks_held() already does this if lockdep
> > > + * is enabled.
> > > + */
> > > +void exit_rcu(void)
> > > +{
> > > +	struct task_struct *t = current;
> > > +
> > > +	if (t->rcu_read_lock_nesting == 0)
> > > +		return;
> > > +	t->rcu_read_lock_nesting = 1;
> > > +	rcu_read_unlock();
> > > +}
> > > +
> > 
> > The interaction with preemption is unclear here. exit.c disables
> > preemption around the call to exit_rcu(), but if, for some reason,
> > rcu_read_unlock_special was set earlier by preemption, then the
> > rcu_read_unlock() code might block and cause problems.
> 
> But rcu_read_unlock_special() does not block.  In fact, it disables
> interrupts over almost all of its execution.  Or am I missing some
> subtlety here?

I am probably the one who was missing a subtlety about how
rcu_read_unlock_special() works.

> 
> > Maybe we should consider clearing rcu_read_unlock_special here ?
> 
> If the task blocked in an RCU read-side critical section just before
> exit_rcu() was called, we need to remove the task from the ->blkd_tasks
> list.  If we fail to do so, we might get a segfault later on.  Also,
> we do need to handle any RCU_READ_UNLOCK_NEED_QS requests from the RCU
> core.
> 
> So I really do like the current approach of calling rcu_read_unlock()
> to do this sort of cleanup.

It looks good then, I just wanted to ensure that the side-effects of
calling rcu_read_unlock() in this code path were well-thought.

Thanks,

Mathieu

> 
> 							Thanx, Paul
> 
> > Thanks,
> > 
> > Mathieu
> > 
> > -- 
> > Mathieu Desnoyers
> > Operating System Efficiency R&D Consultant
> > EfficiOS Inc.
> > http://www.efficios.com
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/

-- 
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ