| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1282037077-29255-1-git-send-email-mattias.wallin@stericsson.com>
Date: Tue, 17 Aug 2010 11:24:37 +0200
From: Mattias Wallin <mattias.wallin@...ricsson.com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: <linux-kernel@...r.kernel.org>,
Mattias Wallin <mattias.wallin@...ricsson.com>
Subject: [PATCH 1/2] MFD: Align ab8500 with the abx500 interface
This patch makes the ab8500 mixed signal chip expose the same
interface for register access as the ab3100, ab3550 and ab5500 chip.
The ab8500_read() and ab8500_write() is removed and replaced with
abx500_get_register_interruptible() and
abx500_set_register_interruptible().
Signed-off-by: Mattias Wallin <mattias.wallin@...ricsson.com>
---
drivers/mfd/Kconfig | 4 +-
drivers/mfd/ab8500-core.c | 286 ++++++++++++++++++++++++++------------------
drivers/regulator/ab8500.c | 86 ++++++++------
drivers/rtc/rtc-ab8500.c | 103 ++++++++--------
include/linux/mfd/ab8500.h | 28 ++++-
include/linux/mfd/abx500.h | 3 +-
6 files changed, 301 insertions(+), 209 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index db51ea1..c957c3a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -433,7 +433,7 @@ config PCF50633_GPIO
config ABX500_CORE
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
- default y if ARCH_U300
+ default y if ARCH_U300 || ARCH_U8500
help
Say yes here if you have the ABX500 Mixed Signal IC family
chips. This core driver expose register access functions.
@@ -473,7 +473,7 @@ config EZX_PCAP
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on SPI=y && GENERIC_HARDIRQS
+ depends on SPI=y && GENERIC_HARDIRQS && ABX500_CORE
select MFD_CORE
help
Select this option to enable access to AB8500 power management
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index defa786..6548f50 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -4,6 +4,7 @@
* License Terms: GNU General Public License v2
* Author: Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>
* Author: Rabin Vincent <rabin.vincent@...ricsson.com>
+ * Changes: Mattias Wallin <mattias.wallin@...ricsson.com>
*/
#include <linux/kernel.h>
@@ -15,6 +16,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
#include <linux/mfd/ab8500.h>
#include <linux/regulator/ab8500.h>
@@ -22,71 +24,71 @@
* Interrupt register offsets
* Bank : 0x0E
*/
-#define AB8500_IT_SOURCE1_REG 0x0E00
-#define AB8500_IT_SOURCE2_REG 0x0E01
-#define AB8500_IT_SOURCE3_REG 0x0E02
-#define AB8500_IT_SOURCE4_REG 0x0E03
-#define AB8500_IT_SOURCE5_REG 0x0E04
-#define AB8500_IT_SOURCE6_REG 0x0E05
-#define AB8500_IT_SOURCE7_REG 0x0E06
-#define AB8500_IT_SOURCE8_REG 0x0E07
-#define AB8500_IT_SOURCE19_REG 0x0E12
-#define AB8500_IT_SOURCE20_REG 0x0E13
-#define AB8500_IT_SOURCE21_REG 0x0E14
-#define AB8500_IT_SOURCE22_REG 0x0E15
-#define AB8500_IT_SOURCE23_REG 0x0E16
-#define AB8500_IT_SOURCE24_REG 0x0E17
+#define AB8500_IT_SOURCE1_REG 0x00
+#define AB8500_IT_SOURCE2_REG 0x01
+#define AB8500_IT_SOURCE3_REG 0x02
+#define AB8500_IT_SOURCE4_REG 0x03
+#define AB8500_IT_SOURCE5_REG 0x04
+#define AB8500_IT_SOURCE6_REG 0x05
+#define AB8500_IT_SOURCE7_REG 0x06
+#define AB8500_IT_SOURCE8_REG 0x07
+#define AB8500_IT_SOURCE19_REG 0x12
+#define AB8500_IT_SOURCE20_REG 0x13
+#define AB8500_IT_SOURCE21_REG 0x14
+#define AB8500_IT_SOURCE22_REG 0x15
+#define AB8500_IT_SOURCE23_REG 0x16
+#define AB8500_IT_SOURCE24_REG 0x17
/*
* latch registers
*/
-#define AB8500_IT_LATCH1_REG 0x0E20
-#define AB8500_IT_LATCH2_REG 0x0E21
-#define AB8500_IT_LATCH3_REG 0x0E22
-#define AB8500_IT_LATCH4_REG 0x0E23
-#define AB8500_IT_LATCH5_REG 0x0E24
-#define AB8500_IT_LATCH6_REG 0x0E25
-#define AB8500_IT_LATCH7_REG 0x0E26
-#define AB8500_IT_LATCH8_REG 0x0E27
-#define AB8500_IT_LATCH9_REG 0x0E28
-#define AB8500_IT_LATCH10_REG 0x0E29
-#define AB8500_IT_LATCH19_REG 0x0E32
-#define AB8500_IT_LATCH20_REG 0x0E33
-#define AB8500_IT_LATCH21_REG 0x0E34
-#define AB8500_IT_LATCH22_REG 0x0E35
-#define AB8500_IT_LATCH23_REG 0x0E36
-#define AB8500_IT_LATCH24_REG 0x0E37
+#define AB8500_IT_LATCH1_REG 0x20
+#define AB8500_IT_LATCH2_REG 0x21
+#define AB8500_IT_LATCH3_REG 0x22
+#define AB8500_IT_LATCH4_REG 0x23
+#define AB8500_IT_LATCH5_REG 0x24
+#define AB8500_IT_LATCH6_REG 0x25
+#define AB8500_IT_LATCH7_REG 0x26
+#define AB8500_IT_LATCH8_REG 0x27
+#define AB8500_IT_LATCH9_REG 0x28
+#define AB8500_IT_LATCH10_REG 0x29
+#define AB8500_IT_LATCH19_REG 0x32
+#define AB8500_IT_LATCH20_REG 0x33
+#define AB8500_IT_LATCH21_REG 0x34
+#define AB8500_IT_LATCH22_REG 0x35
+#define AB8500_IT_LATCH23_REG 0x36
+#define AB8500_IT_LATCH24_REG 0x37
/*
* mask registers
*/
-#define AB8500_IT_MASK1_REG 0x0E40
-#define AB8500_IT_MASK2_REG 0x0E41
-#define AB8500_IT_MASK3_REG 0x0E42
-#define AB8500_IT_MASK4_REG 0x0E43
-#define AB8500_IT_MASK5_REG 0x0E44
-#define AB8500_IT_MASK6_REG 0x0E45
-#define AB8500_IT_MASK7_REG 0x0E46
-#define AB8500_IT_MASK8_REG 0x0E47
-#define AB8500_IT_MASK9_REG 0x0E48
-#define AB8500_IT_MASK10_REG 0x0E49
-#define AB8500_IT_MASK11_REG 0x0E4A
-#define AB8500_IT_MASK12_REG 0x0E4B
-#define AB8500_IT_MASK13_REG 0x0E4C
-#define AB8500_IT_MASK14_REG 0x0E4D
-#define AB8500_IT_MASK15_REG 0x0E4E
-#define AB8500_IT_MASK16_REG 0x0E4F
-#define AB8500_IT_MASK17_REG 0x0E50
-#define AB8500_IT_MASK18_REG 0x0E51
-#define AB8500_IT_MASK19_REG 0x0E52
-#define AB8500_IT_MASK20_REG 0x0E53
-#define AB8500_IT_MASK21_REG 0x0E54
-#define AB8500_IT_MASK22_REG 0x0E55
-#define AB8500_IT_MASK23_REG 0x0E56
-#define AB8500_IT_MASK24_REG 0x0E57
-
-#define AB8500_REV_REG 0x1080
+#define AB8500_IT_MASK1_REG 0x40
+#define AB8500_IT_MASK2_REG 0x41
+#define AB8500_IT_MASK3_REG 0x42
+#define AB8500_IT_MASK4_REG 0x43
+#define AB8500_IT_MASK5_REG 0x44
+#define AB8500_IT_MASK6_REG 0x45
+#define AB8500_IT_MASK7_REG 0x46
+#define AB8500_IT_MASK8_REG 0x47
+#define AB8500_IT_MASK9_REG 0x48
+#define AB8500_IT_MASK10_REG 0x49
+#define AB8500_IT_MASK11_REG 0x4A
+#define AB8500_IT_MASK12_REG 0x4B
+#define AB8500_IT_MASK13_REG 0x4C
+#define AB8500_IT_MASK14_REG 0x4D
+#define AB8500_IT_MASK15_REG 0x4E
+#define AB8500_IT_MASK16_REG 0x4F
+#define AB8500_IT_MASK17_REG 0x50
+#define AB8500_IT_MASK18_REG 0x51
+#define AB8500_IT_MASK19_REG 0x52
+#define AB8500_IT_MASK20_REG 0x53
+#define AB8500_IT_MASK21_REG 0x54
+#define AB8500_IT_MASK22_REG 0x55
+#define AB8500_IT_MASK23_REG 0x56
+#define AB8500_IT_MASK24_REG 0x57
+
+#define AB8500_REV_REG 0x80
/*
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
@@ -99,96 +101,132 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
};
-static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+static int ab8500_get_chip_id(struct device *dev)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+ return (int)ab8500->chip_id;
+}
+
+static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
+ u8 reg, u8 data)
{
int ret;
+ /*
+ * Put the u8 bank and u8 register together into a an u16.
+ * The bank on higher 8 bits and register in lower 8 bits.
+ * */
+ u16 addr = ((u16)bank) << 8 | reg;
dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
+ ret = mutex_lock_interruptible(&ab8500->lock);
+ if (ret)
+ return ret;
+
ret = ab8500->write(ab8500, addr, data);
if (ret < 0)
dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
addr, ret);
+ mutex_unlock(&ab8500->lock);
return ret;
}
-/**
- * ab8500_write() - write an AB8500 register
- * @ab8500: device to write to
- * @addr: address of the register
- * @data: value to write
- */
-int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+static int ab8500_set_register(struct device *dev, u8 bank,
+ u8 reg, u8 value)
{
- int ret;
-
- mutex_lock(&ab8500->lock);
- ret = __ab8500_write(ab8500, addr, data);
- mutex_unlock(&ab8500->lock);
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
- return ret;
+ return set_register_interruptible(ab8500, bank, reg, value);
}
-EXPORT_SYMBOL_GPL(ab8500_write);
-static int __ab8500_read(struct ab8500 *ab8500, u16 addr)
+static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
+ u8 reg, u8 *value)
{
int ret;
+ /* put the u8 bank and u8 reg together into a an u16.
+ * bank on higher 8 bits and reg in lower */
+ u16 addr = ((u16)bank) << 8 | reg;
+
+ ret = mutex_lock_interruptible(&ab8500->lock);
+ if (ret)
+ return ret;
ret = ab8500->read(ab8500, addr);
if (ret < 0)
dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
addr, ret);
+ else
+ *value = ret;
+ mutex_unlock(&ab8500->lock);
dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
return ret;
}
-/**
- * ab8500_read() - read an AB8500 register
- * @ab8500: device to read from
- * @addr: address of the register
- */
-int ab8500_read(struct ab8500 *ab8500, u16 addr)
+static int ab8500_get_register(struct device *dev, u8 bank,
+ u8 reg, u8 *value)
{
- int ret;
-
- mutex_lock(&ab8500->lock);
- ret = __ab8500_read(ab8500, addr);
- mutex_unlock(&ab8500->lock);
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
- return ret;
+ return get_register_interruptible(ab8500, bank, reg, value);
}
-EXPORT_SYMBOL_GPL(ab8500_read);
-
-/**
- * ab8500_set_bits() - set a bitfield in an AB8500 register
- * @ab8500: device to read from
- * @addr: address of the register
- * @mask: mask of the bitfield to modify
- * @data: value to set to the bitfield
- */
-int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data)
+
+static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
{
int ret;
+ u8 data;
+ /* put the u8 bank and u8 reg together into a an u16.
+ * bank on higher 8 bits and reg in lower */
+ u16 addr = ((u16)bank) << 8 | reg;
- mutex_lock(&ab8500->lock);
+ ret = mutex_lock_interruptible(&ab8500->lock);
+ if (ret)
+ return ret;
- ret = __ab8500_read(ab8500, addr);
- if (ret < 0)
+ ret = ab8500->read(ab8500, addr);
+ if (ret < 0) {
+ dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
+ addr, ret);
goto out;
+ }
- ret &= ~mask;
- ret |= data;
+ data = (u8)ret;
+ data = (~bitmask & data) | (bitmask & bitvalues);
- ret = __ab8500_write(ab8500, addr, ret);
+ ret = ab8500->write(ab8500, addr, data);
+ if (ret < 0)
+ dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
+ addr, ret);
+ dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data);
out:
mutex_unlock(&ab8500->lock);
return ret;
}
-EXPORT_SYMBOL_GPL(ab8500_set_bits);
+
+static int ab8500_mask_and_set_register(struct device *dev,
+ u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+
+ return mask_and_set_register_interruptible(ab8500, bank, reg,
+ bitmask, bitvalues);
+
+}
+
+static struct abx500_ops ab8500_ops = {
+ .get_chip_id = ab8500_get_chip_id,
+ .get_register = ab8500_get_register,
+ .set_register = ab8500_set_register,
+ .get_register_page = NULL,
+ .set_register_page = NULL,
+ .mask_and_set_register = ab8500_mask_and_set_register,
+ .event_registers_startup_state_get = NULL,
+ .startup_irq_enabled = NULL,
+};
static void ab8500_irq_lock(unsigned int irq)
{
@@ -213,7 +251,7 @@ static void ab8500_irq_sync_unlock(unsigned int irq)
ab8500->oldmask[i] = new;
reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
- ab8500_write(ab8500, reg, new);
+ set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new);
}
mutex_unlock(&ab8500->irq_lock);
@@ -257,9 +295,11 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
int regoffset = ab8500_irq_regoffset[i];
int status;
+ u8 value;
- status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset);
- if (status <= 0)
+ status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
+ AB8500_IT_LATCH1_REG + regoffset, &value);
+ if (status < 0 || value == 0)
continue;
do {
@@ -267,8 +307,8 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
int line = i * 8 + bit;
handle_nested_irq(ab8500->irq_base + line);
- status &= ~(1 << bit);
- } while (status);
+ value &= ~(1 << bit);
+ } while (value);
}
return IRQ_HANDLED;
@@ -339,6 +379,11 @@ static struct resource ab8500_rtc_resources[] = {
};
static struct mfd_cell ab8500_devs[] = {
+#ifdef CONFIG_DEBUG_FS
+ {
+ .name = "ab8500-debug",
+ },
+#endif
{
.name = "ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
@@ -361,6 +406,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
int ret;
int i;
+ u8 value;
if (plat)
ab8500->irq_base = plat->irq_base;
@@ -368,7 +414,8 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
mutex_init(&ab8500->lock);
mutex_init(&ab8500->irq_lock);
- ret = ab8500_read(ab8500, AB8500_REV_REG);
+ ret = get_register_interruptible(ab8500, AB8500_MISC,
+ AB8500_REV_REG, &value);
if (ret < 0)
return ret;
@@ -377,28 +424,37 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
* 0x10 - Cut 1.0
* 0x11 - Cut 1.1
*/
- if (ret == 0x0 || ret == 0x10 || ret == 0x11) {
- ab8500->revision = ret;
- dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret);
+ if (value == 0x0 || value == 0x10 || value == 0x11) {
+ ab8500->revision = value;
+ dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
} else {
- dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret);
+ dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value);
return -EINVAL;
}
+ ab8500->chip_id = value;
if (plat && plat->init)
plat->init(ab8500);
/* Clear and mask all interrupts */
for (i = 0; i < 10; i++) {
- ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
- ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+ get_register_interruptible(ab8500, AB8500_INTERRUPT,
+ AB8500_IT_LATCH1_REG + i, &value);
+ set_register_interruptible(ab8500, AB8500_INTERRUPT,
+ AB8500_IT_MASK1_REG + i, 0xff);
}
for (i = 18; i < 24; i++) {
- ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
- ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+ get_register_interruptible(ab8500, AB8500_INTERRUPT,
+ AB8500_IT_LATCH1_REG + i, &value);
+ set_register_interruptible(ab8500, AB8500_INTERRUPT,
+ AB8500_IT_MASK1_REG + i, 0xff);
}
+ ret = abx500_register_ops(ab8500->dev, &ab8500_ops);
+ if (ret)
+ return ret;
+
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index cc7cbaf..86d2e1a 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -21,6 +21,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
@@ -33,9 +34,11 @@
* @max_uV: maximum voltage (for variable voltage supplies)
* @min_uV: minimum voltage (for variable voltage supplies)
* @fixed_uV: typical voltage (for fixed voltage supplies)
+ * @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @mask: mask to enable/disable regulator
* @enable: bits to enable the regulator in normal(high power) mode
+ * @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @supported_voltages: supported voltage table
@@ -49,11 +52,13 @@ struct ab8500_regulator_info {
int max_uV;
int min_uV;
int fixed_uV;
- int update_reg;
- int mask;
- int enable;
- int voltage_reg;
- int voltage_mask;
+ u8 update_bank;
+ u8 update_reg;
+ u8 mask;
+ u8 enable;
+ u8 voltage_bank;
+ u8 voltage_reg;
+ u8 voltage_mask;
int const *supported_voltages;
int voltages_len;
};
@@ -97,8 +102,8 @@ static int ab8500_regulator_enable(struct regulator_dev *rdev)
if (regulator_id >= AB8500_NUM_REGULATORS)
return -EINVAL;
- ret = ab8500_set_bits(info->ab8500, info->update_reg,
- info->mask, info->enable);
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg, info->mask, info->enable);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
@@ -114,8 +119,8 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
if (regulator_id >= AB8500_NUM_REGULATORS)
return -EINVAL;
- ret = ab8500_set_bits(info->ab8500, info->update_reg,
- info->mask, 0x0);
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg, info->mask, 0x0);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
@@ -126,19 +131,21 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
{
int regulator_id, ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 value;
regulator_id = rdev_get_id(rdev);
if (regulator_id >= AB8500_NUM_REGULATORS)
return -EINVAL;
- ret = ab8500_read(info->ab8500, info->update_reg);
+ ret = abx500_get_register_interruptible(info->dev,
+ info->update_bank, info->update_reg, &value);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read 0x%x register\n", info->update_reg);
return ret;
}
- if (ret & info->mask)
+ if (value & info->mask)
return true;
else
return false;
@@ -165,14 +172,16 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
{
- int regulator_id, ret, val;
+ int regulator_id, ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 value;
regulator_id = rdev_get_id(rdev);
if (regulator_id >= AB8500_NUM_REGULATORS)
return -EINVAL;
- ret = ab8500_read(info->ab8500, info->voltage_reg);
+ ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
+ info->voltage_reg, &value);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read voltage reg for regulator\n");
@@ -180,11 +189,11 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
}
/* vintcore has a different layout */
- val = ret & info->voltage_mask;
+ value &= info->voltage_mask;
if (regulator_id == AB8500_LDO_INTCORE)
- ret = info->supported_voltages[val >> 0x3];
+ ret = info->supported_voltages[value >> 0x3];
else
- ret = info->supported_voltages[val];
+ ret = info->supported_voltages[value];
return ret;
}
@@ -224,8 +233,9 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
}
/* set the registers for the request */
- ret = ab8500_set_bits(info->ab8500, info->voltage_reg,
- info->voltage_mask, ret);
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->voltage_bank, info->voltage_reg,
+ info->voltage_mask, (u8)ret);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set voltage reg for regulator\n");
@@ -262,9 +272,9 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
.list_voltage = ab8500_list_voltage,
};
-#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable, \
- volt_reg, volt_mask, voltages, \
- len_volts) \
+#define AB8500_LDO(_id, min, max, bank, reg, reg_mask, \
+ reg_enable, volt_bank, volt_reg, volt_mask, \
+ voltages, len_volts) \
{ \
.desc = { \
.name = "LDO-" #_id, \
@@ -275,9 +285,11 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
}, \
.min_uV = (min) * 1000, \
.max_uV = (max) * 1000, \
+ .update_bank = bank, \
.update_reg = reg, \
.mask = reg_mask, \
.enable = reg_enable, \
+ .voltage_bank = volt_bank, \
.voltage_reg = volt_reg, \
.voltage_mask = volt_mask, \
.supported_voltages = voltages, \
@@ -285,8 +297,8 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
.fixed_uV = 0, \
}
-#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask, \
- reg_enable) \
+#define AB8500_FIXED_LDO(_id, fixed, bank, reg, \
+ reg_mask, reg_enable) \
{ \
.desc = { \
.name = "LDO-" #_id, \
@@ -296,6 +308,7 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
.owner = THIS_MODULE, \
}, \
.fixed_uV = fixed * 1000, \
+ .update_bank = bank, \
.update_reg = reg, \
.mask = reg_mask, \
.enable = reg_enable, \
@@ -304,28 +317,29 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
static struct ab8500_regulator_info ab8500_regulator_info[] = {
/*
* Variable Voltage LDOs
- * name, min uV, max uV, ctrl reg, reg mask, enable mask,
- * volt ctrl reg, volt ctrl mask, volt table, num supported volts
+ * name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask,
+ * volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table,
+ * num supported volts
*/
- AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf,
+ AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf,
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf,
+ AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf,
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf,
+ AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38,
+ AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38,
ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
/*
* Fixed Voltage LDOs
- * name, o/p uV, ctrl reg, enable, disable
+ * name, o/p uV, ctrl bank, ctrl reg, enable, disable
*/
- AB8500_FIXED_LDO(TVOUT, 2000, 0x0380, 0x2, 0x2),
- AB8500_FIXED_LDO(AUDIO, 2000, 0x0383, 0x2, 0x2),
- AB8500_FIXED_LDO(ANAMIC1, 2050, 0x0383, 0x4, 0x4),
- AB8500_FIXED_LDO(ANAMIC2, 2050, 0x0383, 0x8, 0x8),
- AB8500_FIXED_LDO(DMIC, 1800, 0x0383, 0x10, 0x10),
- AB8500_FIXED_LDO(ANA, 1200, 0x0383, 0xc, 0x4),
+ AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x2, 0x2),
+ AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x2, 0x2),
+ AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x4, 0x4),
+ AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x8, 0x8),
+ AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x10, 0x10),
+ AB8500_FIXED_LDO(ANA, 1200, 0x03, 0x83, 0xc, 0x4),
};
static inline struct ab8500_regulator_info *find_regulator_info(int id)
diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c
index 2fda031..e346705 100644
--- a/drivers/rtc/rtc-ab8500.c
+++ b/drivers/rtc/rtc-ab8500.c
@@ -14,26 +14,26 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
+#include <linux/mfd/abx500.h>
#include <linux/mfd/ab8500.h>
#include <linux/delay.h>
-#define AB8500_RTC_SOFF_STAT_REG 0x0F00
-#define AB8500_RTC_CC_CONF_REG 0x0F01
-#define AB8500_RTC_READ_REQ_REG 0x0F02
-#define AB8500_RTC_WATCH_TSECMID_REG 0x0F03
-#define AB8500_RTC_WATCH_TSECHI_REG 0x0F04
-#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x0F05
-#define AB8500_RTC_WATCH_TMIN_MID_REG 0x0F06
-#define AB8500_RTC_WATCH_TMIN_HI_REG 0x0F07
-#define AB8500_RTC_ALRM_MIN_LOW_REG 0x0F08
-#define AB8500_RTC_ALRM_MIN_MID_REG 0x0F09
-#define AB8500_RTC_ALRM_MIN_HI_REG 0x0F0A
-#define AB8500_RTC_STAT_REG 0x0F0B
-#define AB8500_RTC_BKUP_CHG_REG 0x0F0C
-#define AB8500_RTC_FORCE_BKUP_REG 0x0F0D
-#define AB8500_RTC_CALIB_REG 0x0F0E
-#define AB8500_RTC_SWITCH_STAT_REG 0x0F0F
-#define AB8500_REV_REG 0x1080
+#define AB8500_RTC_SOFF_STAT_REG 0x00
+#define AB8500_RTC_CC_CONF_REG 0x01
+#define AB8500_RTC_READ_REQ_REG 0x02
+#define AB8500_RTC_WATCH_TSECMID_REG 0x03
+#define AB8500_RTC_WATCH_TSECHI_REG 0x04
+#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x05
+#define AB8500_RTC_WATCH_TMIN_MID_REG 0x06
+#define AB8500_RTC_WATCH_TMIN_HI_REG 0x07
+#define AB8500_RTC_ALRM_MIN_LOW_REG 0x08
+#define AB8500_RTC_ALRM_MIN_MID_REG 0x09
+#define AB8500_RTC_ALRM_MIN_HI_REG 0x0A
+#define AB8500_RTC_STAT_REG 0x0B
+#define AB8500_RTC_BKUP_CHG_REG 0x0C
+#define AB8500_RTC_FORCE_BKUP_REG 0x0D
+#define AB8500_RTC_CALIB_REG 0x0E
+#define AB8500_RTC_SWITCH_STAT_REG 0x0F
/* RtcReadRequest bits */
#define RTC_READ_REQUEST 0x01
@@ -46,13 +46,13 @@
#define COUNTS_PER_SEC (0xF000 / 60)
#define AB8500_RTC_EPOCH 2000
-static const unsigned long ab8500_rtc_time_regs[] = {
+static const u8 ab8500_rtc_time_regs[] = {
AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
AB8500_RTC_WATCH_TSECMID_REG
};
-static const unsigned long ab8500_rtc_alarm_regs[] = {
+static const u8 ab8500_rtc_alarm_regs[] = {
AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
AB8500_RTC_ALRM_MIN_LOW_REG
};
@@ -76,29 +76,30 @@ static unsigned long get_elapsed_seconds(int year)
static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
unsigned long timeout = jiffies + HZ;
int retval, i;
unsigned long mins, secs;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
+ u8 value;
/* Request a data read */
- retval = ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG,
- RTC_READ_REQUEST);
+ retval = abx500_set_register_interruptible(dev,
+ AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
if (retval < 0)
return retval;
/* Early AB8500 chips will not clear the rtc read request bit */
- if (ab8500->revision == 0) {
+ if (abx500_get_chip_id(dev) == 0) {
msleep(1);
} else {
/* Wait for some cycles after enabling the rtc read in ab8500 */
while (time_before(jiffies, timeout)) {
- retval = ab8500_read(ab8500, AB8500_RTC_READ_REQ_REG);
+ retval = abx500_get_register_interruptible(dev,
+ AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
if (retval < 0)
return retval;
- if (!(retval & RTC_READ_REQUEST))
+ if (!(value & RTC_READ_REQUEST))
break;
msleep(1);
@@ -107,10 +108,11 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
/* Read the Watchtime registers */
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
- retval = ab8500_read(ab8500, ab8500_rtc_time_regs[i]);
+ retval = abx500_get_register_interruptible(dev,
+ AB8500_RTC, ab8500_rtc_time_regs[i], &value);
if (retval < 0)
return retval;
- buf[i] = retval;
+ buf[i] = value;
}
mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
@@ -128,7 +130,6 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
- struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
int retval, i;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
unsigned long no_secs, no_mins, secs = 0;
@@ -162,27 +163,29 @@ static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
buf[0] = (no_mins >> 16) & 0xFF;
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
- retval = ab8500_write(ab8500, ab8500_rtc_time_regs[i], buf[i]);
+ retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+ ab8500_rtc_time_regs[i], buf[i]);
if (retval < 0)
return retval;
}
/* Request a data write */
- return ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
+ return abx500_set_register_interruptible(dev, AB8500_RTC,
+ AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
}
static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
int retval, i;
- int rtc_ctrl;
+ u8 rtc_ctrl, value;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
unsigned long secs, mins;
/* Check if the alarm is enabled or not */
- rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG);
- if (rtc_ctrl < 0)
- return rtc_ctrl;
+ retval = abx500_get_register_interruptible(dev, AB8500_RTC,
+ AB8500_RTC_STAT_REG, &rtc_ctrl);
+ if (retval < 0)
+ return retval;
if (rtc_ctrl & RTC_ALARM_ENA)
alarm->enabled = 1;
@@ -192,10 +195,11 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
alarm->pending = 0;
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
- retval = ab8500_read(ab8500, ab8500_rtc_alarm_regs[i]);
+ retval = abx500_get_register_interruptible(dev, AB8500_RTC,
+ ab8500_rtc_alarm_regs[i], &value);
if (retval < 0)
return retval;
- buf[i] = retval;
+ buf[i] = value;
}
mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
@@ -211,15 +215,13 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
{
- struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
-
- return ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
- enabled ? RTC_ALARM_ENA : 0);
+ return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
+ AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
+ enabled ? RTC_ALARM_ENA : 0);
}
static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
int retval, i;
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
unsigned long mins, secs = 0;
@@ -247,7 +249,8 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
/* Set the alarm time */
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
- retval = ab8500_write(ab8500, ab8500_rtc_alarm_regs[i], buf[i]);
+ retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+ ab8500_rtc_alarm_regs[i], buf[i]);
if (retval < 0)
return retval;
}
@@ -276,10 +279,9 @@ static const struct rtc_class_ops ab8500_rtc_ops = {
static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
{
- struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
int err;
struct rtc_device *rtc;
- int rtc_ctrl;
+ u8 rtc_ctrl;
int irq;
irq = platform_get_irq_byname(pdev, "ALARM");
@@ -287,17 +289,18 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
return irq;
/* For RTC supply test */
- err = ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_STATUS_DATA,
- RTC_STATUS_DATA);
+ err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
+ AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
if (err < 0)
return err;
/* Wait for reset by the PorRtc */
msleep(1);
- rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG);
- if (rtc_ctrl < 0)
- return rtc_ctrl;
+ err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
+ AB8500_RTC_STAT_REG, &rtc_ctrl);
+ if (err < 0)
+ return err;
/* Check if the RTC Supply fails */
if (!(rtc_ctrl & RTC_STATUS_DATA)) {
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index f5cec45..d63b605 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -10,6 +10,29 @@
#include <linux/device.h>
/*
+ * AB8500 bank addresses
+ */
+#define AB8500_SYS_CTRL1_BLOCK 0x1
+#define AB8500_SYS_CTRL2_BLOCK 0x2
+#define AB8500_REGU_CTRL1 0x3
+#define AB8500_REGU_CTRL2 0x4
+#define AB8500_USB 0x5
+#define AB8500_TVOUT 0x6
+#define AB8500_DBI 0x7
+#define AB8500_ECI_AV_ACC 0x8
+#define AB8500_RESERVED 0x9
+#define AB8500_GPADC 0xA
+#define AB8500_CHARGER 0xB
+#define AB8500_GAS_GAUGE 0xC
+#define AB8500_AUDIO 0xD
+#define AB8500_INTERRUPT 0xE
+#define AB8500_RTC 0xF
+#define AB8500_MISC 0x10
+#define AB8500_DEBUG 0x12
+#define AB8500_PROD_TEST 0x13
+#define AB8500_OTP_EMUL 0x15
+
+/*
* Interrupts
*/
@@ -99,6 +122,7 @@ struct ab8500 {
int revision;
int irq_base;
int irq;
+ u8 chip_id;
int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
int (*read) (struct ab8500 *a8500, u16 addr);
@@ -124,10 +148,6 @@ struct ab8500_platform_data {
struct regulator_init_data *regulator[AB8500_NUM_REGULATORS];
};
-extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
-extern int ab8500_read(struct ab8500 *a8500, u16 addr);
-extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
-
extern int __devinit ab8500_init(struct ab8500 *ab8500);
extern int __devexit ab8500_exit(struct ab8500 *ab8500);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 390726f..be7373c 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,8 +6,7 @@
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab3550, ab5500 and possibly comming. It is not used for
- * ab4500 and ab8500 since they are another family of chip.
+ * ab3100, ab3550, ab5500, and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@...ricsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@...ricsson.com>
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists