Linux version 2.6.36-rc1 (root@mithril) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Mon Aug 16 20:21:06 CEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f0e7000 (usable) BIOS-e820: 000000007f0e7000 - 000000007f2e8000 (ACPI NVS) BIOS-e820: 000000007f2e8000 - 000000007febe000 (ACPI data) BIOS-e820: 000000007febe000 - 000000007feef000 (ACPI NVS) BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.4 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7f0e7 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFE00000 mask FFFE00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 07FF00000 mask FFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 02000000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000fe020 00024 (v02 APPLE ) ACPI: XSDT 7fefd1c0 00074 (v01 APPLE Apple00 000000A5 01000013) ACPI: FACP 7fefb000 000F4 (v03 APPLE Apple00 000000A5 Loki 0000005F) ACPI: DSDT 7fef0000 048BD (v01 APPLE MacBookP 00020001 INTL 20050309) ACPI: FACS 7fec0000 00040 ACPI: HPET 7fefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 7fef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 7fef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 7fef7000 000A0 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 7fef6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 7fef5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 7feef000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309) ACPI: SSDT 7febd000 0064F (v01 SataRe SataPri 00001000 INTL 20050309) ACPI: SSDT 7febc000 0069C (v01 SataRe SataSec 00001000 INTL 20050309) ACPI: Local APIC address 0xfee00000 1144MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f0e7 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007f0e7 On node 0 totalpages: 520325 free_area_init_node: node 0, pgdat c1800b80, node_mem_map c1dc9020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2290 pages used for memmap HighMem zone: 290807 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [8000 - 87ff] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @c3000000 s32576 r0 d20672 u2097152 pcpu-alloc: s32576 r0 d20672 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516259 Kernel command line: rootfstype=ext4 resume=/dev/sda4 radeon.dynpm=1 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (48 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0001000000 - 0001dbe0f8] TEXT DATA BSS #3 [000009fc00 - 0000100000] BIOS reserved #4 [0001dbf000 - 0001dc71f9] BRK #5 [0000002000 - 0000003000] TRAMPOLINE #6 [0000003000 - 0000007000] ACPI WAKEUP #7 [0000007000 - 0000008000] PGTABLE #8 [0001dc8000 - 0001dc9000] BOOTMEM #9 [0001dc9000 - 0002db1000] BOOTMEM #10 [0001dbe100 - 0001dbe104] BOOTMEM #11 [0001dbe140 - 0001dbe380] BOOTMEM #12 [0001dbe380 - 0001dbe3d4] BOOTMEM #13 [0002db1000 - 0002dba000] BOOTMEM #14 [0001dbe400 - 0001dbe46c] BOOTMEM #15 [0002dba000 - 0002dcc000] BOOTMEM #16 [0001dbe480 - 0001dbe4a5] BOOTMEM #17 [0001dbe4c0 - 0001dbe4e7] BOOTMEM #18 [0001dbe500 - 0001dbe6c0] BOOTMEM #19 [0001dbe6c0 - 0001dbe700] BOOTMEM #20 [0001dbe700 - 0001dbe740] BOOTMEM #21 [0001dbe740 - 0001dbe780] BOOTMEM #22 [0001dbe780 - 0001dbe7c0] BOOTMEM #23 [0001dbe7c0 - 0001dbe800] BOOTMEM #24 [0001dbe800 - 0001dbe840] BOOTMEM #25 [0001dbe840 - 0001dbe880] BOOTMEM #26 [0001dbe880 - 0001dbe8c0] BOOTMEM #27 [0001dbe8c0 - 0001dbe900] BOOTMEM #28 [0001dbe900 - 0001dbe940] BOOTMEM #29 [0001dbe940 - 0001dbe980] BOOTMEM #30 [0001dbe980 - 0001dbe9c0] BOOTMEM #31 [0001dbe9c0 - 0001dbea00] BOOTMEM #32 [0001dbea00 - 0001dbea40] BOOTMEM #33 [0001dbea40 - 0001dbea80] BOOTMEM #34 [0001dbea80 - 0001dbea90] BOOTMEM #35 [0001dbeac0 - 0001dbeaf0] BOOTMEM #36 [0001dbeb00 - 0001dbeb30] BOOTMEM #37 [0003000000 - 000300d000] BOOTMEM #38 [0003200000 - 000320d000] BOOTMEM #39 [0001dbeb40 - 0001dbeb44] BOOTMEM #40 [0001dbeb80 - 0001dbeb84] BOOTMEM #41 [0001dbebc0 - 0001dbebc8] BOOTMEM #42 [0001dbec00 - 0001dbec08] BOOTMEM #43 [0001dbec40 - 0001dbece8] BOOTMEM #44 [0001dbed00 - 0001dbed68] BOOTMEM #45 [0002dcc000 - 0002dd0000] BOOTMEM #46 [0002dd0000 - 0002e50000] BOOTMEM #47 [0002e50000 - 0002e90000] BOOTMEM Initializing HighMem for node 0 (000377fe:0007f0e7) Memory: 2049872k/2081692k available (5737k kernel code, 31428k reserved, 2488k data, 408k init, 1172388k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1809000 - 0xc186f000 ( 408 kB) .data : 0xc159a6fb - 0xc1808878 (2488 kB) .text : 0xc1000000 - 0xc159a6fb (5737 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptable hierarchical RCU implementation. RCU lockdep checking is enabled. NR_IRQS:320 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3567 kB per task-struct memory footprint: 1152 bytes hpet clockevent registered Fast TSC calibration failed TSC: PIT calibration matches HPET. 1 loops Detected 2327.500 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.00 BogoMIPS (lpj=9310000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100702 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06 NMI watchdog enabled, takes one hw-pmu counter. lockdep: fixing up alternatives. Booting Node 0, Processors #1 Ok. Initializing CPU#1 NMI watchdog enabled, takes one hw-pmu counter. Brought up 2 CPUs Total of 2 processors activated (9309.97 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820 PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 7feb8a90 002F0 (v01 APPLE Cpu0Ist 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002F0 (v01 APPLE Cpu0Ist 00003000 INTL 20050309) ACPI: SSDT 7feb6c10 002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309) ACPI: SSDT 7feb7f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) ACPI: SSDT 7feb6f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:07.0: reg 10: [mem 0x98404000-0x98404fff] pci 0000:00:1b.0: reg 10: [mem 0x98400000-0x98403fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f] pci 0000:00:1d.7: reg 10: [mem 0x98405400-0x984057ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af] pci 0000:00:1f.2: reg 24: [mem 0x98405000-0x984053ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff pref] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff] pci 0000:01:00.0: reg 18: [mem 0x98300000-0x9830ffff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0x98300000-0x983fffff] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:02:00.0: reg 10: [mem 0x98200000-0x98203fff 64bit] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0x98200000-0x982fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0x98100000-0x9810ffff 64bit] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0x98100000-0x981fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x94100000-0x980fffff] pci 0000:00:1c.2: bridge window [mem 0x90000000-0x93ffffff 64bit pref] pci 0000:0c:03.0: reg 10: [mem 0x94004000-0x940047ff] pci 0000:0c:03.0: reg 14: [mem 0x94000000-0x94003fff] pci 0000:0c:03.0: supports D1 D2 pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:0c:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0x94000000-0x940fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007f0e7000 - 000000007fffffff Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:07: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.2 BAR 7 [io 0x1000-0x1fff] pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved system 00:07: [io 0x0680-0x06ef] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x0810-0x0817] has been reserved system 00:07: [io 0x0400-0x047f] has been reserved system 00:07: [io 0x0500-0x053f] has been reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:00:1c.0: BAR 9: assigned [mem 0x98500000-0x986fffff pref] pci 0000:00:1c.1: BAR 9: assigned [mem 0x98700000-0x988fffff 64bit pref] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff] pci 0000:01:00.0: BAR 6: assigned [mem 0x98320000-0x9833ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0x98300000-0x983fffff] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:02:00.0: BAR 6: assigned [mem 0x98500000-0x9851ffff pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0x98200000-0x982fffff] pci 0000:00:1c.0: bridge window [mem 0x98500000-0x986fffff pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0x98100000-0x981fffff] pci 0000:00:1c.1: bridge window [mem 0x98700000-0x988fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x94100000-0x980fffff] pci 0000:00:1c.2: bridge window [mem 0x90000000-0x93ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0x94000000-0x940fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0x98300000-0x983fffff] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0x98200000-0x982fffff] pci_bus 0000:02: resource 2 [mem 0x98500000-0x986fffff pref] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] pci_bus 0000:03: resource 1 [mem 0x98100000-0x981fffff] pci_bus 0000:03: resource 2 [mem 0x98700000-0x988fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] pci_bus 0000:04: resource 1 [mem 0x94100000-0x980fffff] pci_bus 0000:04: resource 2 [mem 0x90000000-0x93ffffff 64bit pref] pci_bus 0000:0c: resource 1 [mem 0x94000000-0x940fffff] pci_bus 0000:0c: resource 4 [io 0x0000-0xffff] pci_bus 0000:0c: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS mismatch (256 != 64), using 64 bytes DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7 microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7 microcode: Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 1713 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 15 ACPI: AC Adapter [ADP1] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet Non-volatile memory driver v1.3 intel_rng: FWH not detected [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (RV530 0x1002:0x71C5). [drm] register mmio base: 0x98300000 [drm] register mmio size: 65536 ATOM BIOS: M56P [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF radeon 0000:01:00.0: irq 44 for MSI/MSI-X [drm] radeon: using MSI. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 438742 kiB. [TTM] Zone highmem: Available graphics memory: 1024936 kiB. [TTM] Initializing pool allocator. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: 1 quad pipes, 2 z pipes initialized. [drm] PCIE GART of 512M enabled (table at 0x00040000). [drm] Loading R500 Microcode [drm] radeon: ring at 0x0000000010000000 [drm] ring test succeeded in 9 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs failed to evaluate ATIF got AE_BAD_PARAMETER [drm] Default TV standard: NTSC [drm] Default TV standard: NTSC [drm] Radeon Display Connectors [drm] Connector 0: [drm] LVDS [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] LCD1: INTERNAL_LVTM1 [drm] Connector 1: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] DFP1: INTERNAL_KLDSCP_TMDS1 ACPI: Battery Slot [BAT0] (battery present) [drm] fb mappable at 0x800C0000 [drm] vram apper at 0x80000000 [drm] size 7258112 [drm] fb depth is 24 [drm] pitch is 6912 Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0 loop: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 sky2: driver version 1.28 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC chip revision 2 sky2 0000:02:00.0: irq 45 for MSI/MSI-X sky2 0000:02:00.0: eth0: addr 00:17:f2:c7:5f:06 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver rndis_host ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ath9k 0000:03:00.0: setting latency timer to 64 ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FAV1, max UDMA/66 ata1.00: configured for UDMA/66 scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 ath: EEPROM regdomain: 0x37 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: AW ath: Regpair used: 0x37 phy0: Selected rate control algorithm 'ath9k_rate_control' cfg80211: Calling CRDA for country: AW Registered led device: ath9k-phy0::radio Registered led device: ath9k-phy0::assoc Registered led device: ath9k-phy0::tx Registered led device: ath9k-phy0::rx phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xf82a0000, irq=17 firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata3.01: ATA-7: Hitachi HTS721010G9SA00, MCZAC13W, max UDMA/133 ata3.01: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ata3.01: configured for UDMA/133 scsi 2:0:1:0: Direct-Access ATA Hitachi HTS72101 MCZA PQ: 0 ANSI: 5 sd 2:0:1:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) sd 2:0:1:0: [sda] Write Protect is off sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: Attached scsi generic sg1 type 0 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98405400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller sda: sda1 sda2 sda3 sda4 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 sd 2:0:1:0: [sda] Attached SCSI disk uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts with ACPI region SMBI [??? 0x0000efa0-0x0000efaf flags 0x49] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lirc_dev: IR Remote Control driver registered, major 251 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR LIRC bridge handler initialized applesmc: Apple MacBook Pro detected: applesmc: - Model with accelerometer applesmc: - Model with light sensors and backlight applesmc: - Model with 12 temperature sensors applesmc: device has already been initialized (0xe0, 0x00). applesmc: device successfully initialized. applesmc: 2 fans found. input: applesmc as /devices/platform/applesmc.768/input/input4 Registered led device: smc::kbd_backlight applesmc: driver successfully loaded. coretemp coretemp.0: TjMax is assumed as 100 C! coretemp coretemp.1: TjMax is assumed as 100 C! iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb cpuidle: using governor ladder cpuidle: using governor menu ioatdma: Intel(R) QuickData Technology Driver 4.00 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: STAC922x, Apple subsys_id=106b1a00 ALSA device list: #0: HDA Intel at 0x98400000 irq 46 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.15 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:08: setting system clock to 2010-08-17 17:04:19 UTC (1282064659) EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 408k freed Write protecting the kernel text: 5740k Write protecting the kernel read-only data: 2084k usb 1-4: new high speed USB device using ehci_hcd and address 3 firewire_core: created device fw0: GUID 0017f2fffe8db89e, S800 usb 2-2: new full speed USB device using uhci_hcd and address 2 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 apple 0003:05AC:021B.0001: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6 apple 0003:05AC:021B.0002: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2 usb 4-2: new full speed USB device using uhci_hcd and address 2 generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0 usb 5-1: new full speed USB device using uhci_hcd and address 2 usbhid 5-1:1.0: couldn't find an input interrupt endpoint Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. appletouch: Geyser mode initialized. input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input7 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usbcore: registered new interface driver appletouch udev: starting version 151 udevd (1947): /proc/1947/oom_adj is deprecated, please use /proc/1947/oom_score_adj instead. usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -75 usb 5-1: USB disconnect, address 2 usb 5-1: new full speed USB device using uhci_hcd and address 3 EXT4-fs (sda3): re-mounted. Opts: nobarrier,auto_da_alloc Adding 4912324k swap on /dev/sda4. Priority:-1 extents:1 across:4912324k microcode: CPU0 updated to revision 0xcc, date = 2007-09-16 microcode: CPU1 updated to revision 0xcc, date = 2007-09-16 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized sky2 0000:02:00.0: eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating from 00:22:6b:ea:c0:85 by local choice (reason=3) wlan0: authenticate with 00:22:6b:ea:c0:85 (try 1) wlan0: authenticated wlan0: associate with 00:22:6b:ea:c0:85 (try 1) wlan0: RX AssocResp from 00:22:6b:ea:c0:85 (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ================================= [ INFO: inconsistent lock state ] 2.6.36-rc1 #1 --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. ip6tables-resto/3098 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&lock->lock)->rlock){+.?...}, at: [] get_counters+0xcc/0x160 {IN-SOFTIRQ-W} state was registered at: [] __lock_acquire+0x9b3/0x1850 [] lock_acquire+0x64/0x80 [] _raw_spin_lock+0x3d/0x50 [] ip6t_do_table+0x5f/0x440 [] ip6table_filter_hook+0x22/0x30 [] nf_iterate+0x71/0x90 [] nf_hook_slow+0xcf/0x120 [] mld_sendpack+0x276/0x4d0 [] mld_ifc_timer_expire+0x258/0x2f0 [] run_timer_softirq+0x130/0x280 [] __do_softirq+0x91/0x130 [] do_softirq+0x5d/0x70 [] irq_exit+0x75/0x80 [] smp_apic_timer_interrupt+0x56/0x90 [] apic_timer_interrupt+0x2f/0x34 [] _raw_spin_lock+0x3d/0x50 [] __d_lookup+0xca/0x160 [] do_lookup+0x3d/0x1c0 [] link_path_walk+0x3a6/0xa40 [] path_walk+0x44/0xa0 [] do_path_lookup+0x51/0x60 [] user_path_at+0x3c/0x80 [] sys_faccessat+0x9a/0x180 [] sys_access+0x20/0x30 [] syscall_call+0x7/0xb irq event stamp: 5463 hardirqs last enabled at (5463): [] local_bh_enable+0x62/0xe0 hardirqs last disabled at (5461): [] local_bh_enable+0x24/0xe0 softirqs last enabled at (5462): [] get_counters+0x7d/0x160 softirqs last disabled at (5460): [] get_counters+0x26/0x160 other info that might help us debug this: 2 locks held by ip6tables-resto/3098: #0: (sk_lock-AF_INET6){+.+.+.}, at: [] ipv6_getsockopt+0x98/0xe0 #1: (&xt[i].mutex){+.+.+.}, at: [] xt_find_table_lock+0x2c/0xe0 stack backtrace: Pid: 3098, comm: ip6tables-resto Not tainted 2.6.36-rc1 #1 Call Trace: [] ? printk+0x18/0x1a [] print_usage_bug+0x15c/0x1a0 [] mark_lock+0x3a5/0x5b0 [] ? check_usage_backwards+0x0/0xe0 [] __lock_acquire+0x9f4/0x1850 [] ? rb_insert_color+0xd3/0x110 [] ? __kmalloc+0x6f/0xf0 [] lock_acquire+0x64/0x80 [] ? get_counters+0xcc/0x160 [] _raw_spin_lock+0x3d/0x50 [] ? get_counters+0xcc/0x160 [] get_counters+0xcc/0x160 [] do_ip6t_get_ctl+0x1ad/0x2d0 [] ? mutex_lock_interruptible_nested+0x23a/0x3c0 [] nf_sockopt+0x105/0x180 [] ? local_bh_enable+0x4a/0xe0 [] nf_getsockopt+0x24/0x30 [] ipv6_getsockopt+0xb3/0xe0 [] rawv6_getsockopt+0x3b/0x170 [] ? might_fault+0x5a/0xb0 [] sock_common_getsockopt+0x22/0x30 [] sys_getsockopt+0x4c/0xa0 [] sys_socketcall+0xfc/0x270 [] sysenter_do_call+0x12/0x36 ACPI: EC: GPE storm detected, transactions will use polling mode applesmc: light sensor data length set to 6 input: Pommed beeper device as /devices/virtual/input/input8 ata3.01: configured for UDMA/133 ata3: EH complete EXT4-fs (sda3): re-mounted. Opts: nobarrier,auto_da_alloc,commit=0 input: mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:46/input9 generic-bluetooth 0005:05AC:030C.0004: input: BLUETOOTH HID v2.00 Mouse [mouse] on 00:17:F2:A4:44:6D