| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AANLkTim4gt-cO1yWa9imh_7TQ2PTm042LJjR2p8wLcZa@mail.gmail.com>
Date: Fri, 20 Aug 2010 17:00:48 -0400
From: T Dent <tdent48227@...il.com>
To: linux-kernel@...r.kernel.org
Cc: greg@...ah.com, bzolnier@...il.com, Larry.Finger@...inger.net,
joe@...ches.com, pshah.mumbai@...il.com
Subject: [PATCH 8/8] Staging: rtl8187se: r8185b_init: fixed alot of
checkpatch.pl issues
>From 8d4d4725e5c1c2d17e715b4e9b083af7174774a1 Mon Sep 17 00:00:00 2001
From: Tracey Dent <Tdent48227@...il.com>
Date: Fri, 20 Aug 2010 16:26:42 -0400
Subject: [PATCH 8/8] Staging: rtl8187se: r8185b_init: fixed alot of
checkpatch.pl issues
Fixed numerous coding style issues using checkpatch.pl
Signed-off-by: Tracey Dent <tdent48227@...il.com>
---
drivers/staging/rtl8187se/r8185b_init.c | 1509 +++++++++++++++----------------
1 files changed, 716 insertions(+), 793 deletions(-)
diff --git a/drivers/staging/rtl8187se/r8185b_init.c
b/drivers/staging/rtl8187se/r8185b_init.c
index a0ece1f..059fa08 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -2,14 +2,14 @@
Copyright (c) Realtek Semiconductor Corp. All rights reserved.
Module Name:
- r8185b_init.c
+ r8185b_init.c
Abstract:
- Hardware Initialization and Hardware IO for RTL8185B
+ Hardware Initialization and Hardware IO for RTL8185B
Major Change History:
- When Who What
- ---------- --------------- -------------------------------
+ When Who What
+ ---------- --------------- -------------------------------
2006-11-15 Xiong Created
Notes:
@@ -29,94 +29,94 @@ Notes:
#include "ieee80211/dot11d.h"
-//#define CONFIG_RTL8180_IO_MAP
+/* #define CONFIG_RTL8180_IO_MAP */
#define TC_3W_POLL_MAX_TRY_CNT 5
-static u8 MAC_REG_TABLE[][2]={
- //PAGA 0:
- // 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL),
0x1E0(ARFR) would set in HwConfigureRTL8185()
- // 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in
InitializeAdapter8185().
- // 0x1F0~0x1F8 set in MacConfig_85BASIC()
- {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
- {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54},
{0x8b, 0xb8}, {0x8c, 0x03},
- {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00},
{0x5b, 0x18}, {0x91, 0x03},
- {0x94, 0x0F}, {0x95, 0x32},
- {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
- {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00},
{0xf3, 0x00}, {0xf4, 0x32},
- {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00},
{0xf8, 0x46}, {0xf9, 0xa4},
- {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96},
{0xfd, 0xa4}, {0xfe, 0x00},
- {0xff, 0x00},
-
- //PAGE 1:
- // For Flextronics system Logo PCIHCT failure:
- // 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1
- {0x5e, 0x01},
- {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04},
{0x5b, 0x00}, {0x60, 0x24},
- {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09},
{0x80, 0x0F}, {0x81, 0xFF},
- {0x82, 0xFF}, {0x83, 0x03},
- {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22},
{0xC7, 0x22}, {0xC8, 0x22}, //lzm add 080826
- {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD,
0x22},//lzm add 080826
- {0xe2, 0x00},
-
-
- //PAGE 2:
- {0x5e, 0x02},
- {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08},
{0x50, 0x05}, {0x51, 0xf5},
- {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff},
{0x55, 0xff}, {0x56, 0xff},
- {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08},
{0x5a, 0x08}, {0x5b, 0x08},
- {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08},
{0x63, 0x08}, {0x64, 0x2f},
- {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
- {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff},
{0xc6, 0xff}, {0xc7, 0xff},
- {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
-
- //PAGA 0:
- {0x5e, 0x00},{0x9f, 0x03}
- };
-
-
-static u8 ZEBRA_AGC[]={
+static u8 MAC_REG_TABLE[][2] = {
+ /*PAGA 0: */
+ /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set
in HwConfigureRTL8185() */
+ /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in
InitializeAdapter8185(). */
+ /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */
+ {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
+ {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
+ {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
+ {0x94, 0x0F}, {0x95, 0x32},
+ {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
+ {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
+ {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
+ {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
+ {0xff, 0x00},
+
+ /*PAGE 1: */
+ /* For Flextronics system Logo PCIHCT failure: */
+ /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space
0x45[7]=1 */
+ {0x5e, 0x01},
+ {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
+ {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
+ {0x82, 0xFF}, {0x83, 0x03},
+ {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8,
0x22}, /* lzm add 080826 */
+ {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD,
0x22},/* lzm add 080826 */
+ {0xe2, 0x00},
+
+
+ /* PAGE 2: */
+ {0x5e, 0x02},
+ {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
+ {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
+ {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
+ {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
+ {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
+ {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
+ {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
+
+ /* PAGA 0: */
+ {0x5e, 0x00}, {0x9f, 0x03}
+ };
+
+
+static u8 ZEBRA_AGC[] = {
0,
- 0x7E,0x7E,0x7E,0x7E,0x7D,0x7C,0x7B,0x7A,0x79,0x78,0x77,0x76,0x75,0x74,0x73,0x72,
- 0x71,0x70,0x6F,0x6E,0x6D,0x6C,0x6B,0x6A,0x69,0x68,0x67,0x66,0x65,0x64,0x63,0x62,
- 0x48,0x47,0x46,0x45,0x44,0x29,0x28,0x27,0x26,0x25,0x24,0x23,0x22,0x21,0x08,0x07,
- 0x06,0x05,0x04,0x03,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x10,0x11,0x12,0x13,0x15,0x16,
- 0x17,0x17,0x18,0x18,0x19,0x1a,0x1a,0x1b,0x1b,0x1c,0x1c,0x1d,0x1d,0x1d,0x1e,0x1e,
- 0x1f,0x1f,0x1f,0x20,0x20,0x20,0x20,0x21,0x21,0x21,0x22,0x22,0x22,0x23,0x23,0x24,
- 0x24,0x25,0x25,0x25,0x26,0x26,0x27,0x27,0x2F,0x2F,0x2F,0x2F,0x2F,0x2F,0x2F,0x2F
+ 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77,
0x76, 0x75, 0x74, 0x73, 0x72,
+ 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67,
0x66, 0x65, 0x64, 0x63, 0x62,
+ 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24,
0x23, 0x22, 0x21, 0x08, 0x07,
+ 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10,
0x11, 0x12, 0x13, 0x15, 0x16,
+ 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c,
0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+ 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22,
0x22, 0x22, 0x23, 0x23, 0x24,
+ 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F,
0x2F, 0x2F, 0x2F, 0x2F, 0x2F
};
-static u32 ZEBRA_RF_RX_GAIN_TABLE[]={
- 0x0096,0x0076,0x0056,0x0036,0x0016,0x01f6,0x01d6,0x01b6,
- 0x0196,0x0176,0x00F7,0x00D7,0x00B7,0x0097,0x0077,0x0057,
- 0x0037,0x00FB,0x00DB,0x00BB,0x00FF,0x00E3,0x00C3,0x00A3,
- 0x0083,0x0063,0x0043,0x0023,0x0003,0x01E3,0x01C3,0x01A3,
- 0x0183,0x0163,0x0143,0x0123,0x0103
+static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
+ 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
+ 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
+ 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
+ 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
+ 0x0183, 0x0163, 0x0143, 0x0123, 0x0103
};
-static u8 OFDM_CONFIG[]={
- // OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX
- // OFDM reg0x3C[4]=1'b1: Enable RX power saving mode
- // ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test
+static u8 OFDM_CONFIG[] = {
+ /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
+ /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
+ /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
- // 0x00
+ /* 0x00 */
0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
- // 0x10
+ /* 0x10 */
0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
- // 0x20
+ /* 0x20 */
0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
- // 0x30
+ /* 0x30 */
0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
0xD8, 0x3C, 0x7B, 0x10, 0x10
};
-/*---------------------------------------------------------------
- * Hardware IO
- * the code is ported from Windows source code
- ----------------------------------------------------------------*/
+/* ---------------------------------------------------------------
+ * Hardware IO
+ * the code is ported from Windows source code
+ ----------------------------------------------------------------*/
void
PlatformIOWrite1Byte(
@@ -126,7 +126,7 @@ PlatformIOWrite1Byte(
)
{
write_nic_byte(dev, offset, data);
- read_nic_byte(dev, offset); // To make sure write operation is
completed, 2005.11.09, by rcnjko.
+ read_nic_byte(dev, offset); /* To make sure write operation is
completed, 2005.11.09, by rcnjko. */
}
@@ -138,7 +138,7 @@ PlatformIOWrite2Byte(
)
{
write_nic_word(dev, offset, data);
- read_nic_word(dev, offset); // To make sure write operation is
completed, 2005.11.09, by rcnjko.
+ read_nic_word(dev, offset); /* To make sure write operation is
completed, 2005.11.09, by rcnjko. */
}
@@ -151,9 +151,9 @@ PlatformIOWrite4Byte(
u32 data
)
{
-//{by amy 080312
-if (offset == PhyAddr)
- {//For Base Band configuration.
+/* {by amy 080312 */
+if (offset == PhyAddr) {
+/* For Base Band configuration. */
unsigned char cmdByte;
unsigned long dataBytes;
unsigned char idx;
@@ -162,37 +162,36 @@ if (offset == PhyAddr)
cmdByte = (u8)(data & 0x000000ff);
dataBytes = data>>8;
- //
- // 071010, rcnjko:
- // The critical section is only BB read/write race condition.
- // Assumption:
- // 1. We assume NO one will access BB at DIRQL, otherwise, system
will crash for
- // acquiring the spinlock in such context.
- // 2. PlatformIOWrite4Byte() MUST NOT be recursive.
- //
-// NdisAcquireSpinLock( &(pDevice->IoSpinLock) );
-
- for(idx = 0; idx < 30; idx++)
- { // Make sure command bit is clear before access it.
+ /*
+ 071010, rcnjko:
+ The critical section is only BB read/write race condition.
+ Assumption:
+ 1. We assume NO one will access BB at DIRQL, otherwise, system
will crash for
+ acquiring the spinlock in such context.
+ 2. PlatformIOWrite4Byte() MUST NOT be recursive.
+ */
+/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
+
+ for (idx = 0; idx < 30; idx++) {
+ /* Make sure command bit is clear before access it. */
u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
- if((u1bTmp & BIT7) == 0)
+ if ((u1bTmp & BIT7) == 0)
break;
else
mdelay(10);
}
- for(idx=0; idx < 3; idx++)
- {
- PlatformIOWrite1Byte(dev,offset+1+idx,((u8*)&dataBytes)[idx] );
- }
+ for (idx = 0; idx < 3; idx++)
+ PlatformIOWrite1Byte(dev, offset+1+idx, ((u8 *)&dataBytes)[idx]);
+
write_nic_byte(dev, offset, cmdByte);
-// NdisReleaseSpinLock( &(pDevice->IoSpinLock) );
+/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
}
-//by amy 080312}
- else{
+/* by amy 080312} */
+ else {
write_nic_dword(dev, offset, data);
- read_nic_dword(dev, offset); // To make sure write operation is
completed, 2005.11.09, by rcnjko.
+ read_nic_dword(dev, offset); /* To make sure write operation is
completed, 2005.11.09, by rcnjko. */
}
}
@@ -256,59 +255,49 @@ HwHSSIThreeWire(
u8 TryCnt;
u8 u1bTmp;
- do
- {
- // Check if WE and RE are cleared.
- for(TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)
- {
+ do {
+ /* Check if WE and RE are cleared. */
+ for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
- if( (u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0 )
- {
+ if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
break;
- }
+
udelay(10);
}
if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
- // RTL8187S HSSI Read/Write Function
+ /* RTL8187S HSSI Read/Write Function */
u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
- if(bSI)
- {
- u1bTmp |= RF_SW_CFG_SI; //reg08[1]=1 Serial Interface(SI)
- }else
- {
- u1bTmp &= ~RF_SW_CFG_SI; //reg08[1]=0 Parallel Interface(PI)
- }
+ if (bSI)
+ u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
+
+ else
+ u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */
+
write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
- if(bSI)
- {
- // jong: HW SI read must set reg84[3]=0.
+ if (bSI) {
+ /* jong: HW SI read must set reg84[3]=0. */
u1bTmp = read_nic_byte(dev, RFPinsSelect);
u1bTmp &= ~BIT3;
- write_nic_byte(dev, RFPinsSelect, u1bTmp );
+ write_nic_byte(dev, RFPinsSelect, u1bTmp);
}
- // Fill up data buffer for write operation.
-
- if(bWrite)
- {
- if(nDataBufBitCnt == 16)
- {
- write_nic_word(dev, SW_3W_DB0, *((u16*)pDataBuf));
- }
- else if(nDataBufBitCnt == 64) // RTL8187S shouldn't enter this case
- {
- write_nic_dword(dev, SW_3W_DB0, *((u32*)pDataBuf));
- write_nic_dword(dev, SW_3W_DB1, *((u32*)(pDataBuf + 4)));
- }
- else
- {
+ /* Fill up data buffer for write operation. */
+
+ if (bWrite) {
+ if (nDataBufBitCnt == 16) {
+ write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
+ } else if (nDataBufBitCnt == 64) {
+ /* RTL8187S shouldn't enter this case */
+ write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
+ write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
+ } else {
int idx;
int ByteCnt = nDataBufBitCnt / 8;
- //printk("%d\n",nDataBufBitCnt);
+ /* printk("%d\n",nDataBufBitCnt); */
if ((nDataBufBitCnt % 8) != 0)
panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
nDataBufBitCnt);
@@ -317,67 +306,53 @@ HwHSSIThreeWire(
panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
nDataBufBitCnt);
- for(idx = 0; idx < ByteCnt; idx++)
- {
+ for (idx = 0; idx < ByteCnt; idx++)
write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
- }
- }
- }
- else //read
- {
- if(bSI)
- {
- // SI - reg274[3:0] : RF register's Address
- write_nic_word(dev, SW_3W_DB0, *((u16*)pDataBuf) );
+
}
- else
- {
- // PI - reg274[15:12] : RF register's Address
- write_nic_word(dev, SW_3W_DB0, (*((u16*)pDataBuf)) << 12);
+ } else { /* read */
+ if (bSI) {
+ /* SI - reg274[3:0] : RF register's Address */
+ write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
+ } else {
+ /* PI - reg274[15:12] : RF register's Address */
+ write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12);
}
}
- // Set up command: WE or RE.
- if(bWrite)
- {
+ /* Set up command: WE or RE. */
+ if (bWrite)
write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
- }
+
else
- {
write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
- }
- // Check if DONE is set.
- for(TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)
- {
+
+ /* Check if DONE is set. */
+ for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
- if( (u1bTmp & SW_3W_CMD1_DONE) != 0 )
- {
+ if ((u1bTmp & SW_3W_CMD1_DONE) != 0)
break;
- }
+
udelay(10);
}
write_nic_byte(dev, SW_3W_CMD1, 0);
- // Read back data for read operation.
- if(bWrite == 0)
- {
- if(bSI)
- {
- //Serial Interface : reg363_362[11:0]
- *((u16*)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
- }
- else
- {
- //Parallel Interface : reg361_360[11:0]
- *((u16*)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
+ /* Read back data for read operation. */
+ if (bWrite == 0) {
+ if (bSI) {
+ /* Serial Interface : reg363_362[11:0] */
+ *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
+ } else {
+ /* Parallel Interface : reg361_360[11:0] */
+ *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
}
- *((u16*)pDataBuf) &= 0x0FFF;
+ *((u16 *)pDataBuf) &= 0x0FFF;
}
- }while(0);
+ } while (0);
return bResult;
}
@@ -410,25 +385,25 @@ u32 RF_ReadReg(struct net_device *dev, u8 offset)
}
-// by Owen on 04/07/14 for writing BB register successfully
+/* by Owen on 04/07/14 for writing BB register successfully */
void
WriteBBPortUchar(
struct net_device *dev,
u32 Data
)
{
- //u8 TimeoutCounter;
+ /* u8 TimeoutCounter; */
u8 RegisterContent;
u8 UCharData;
UCharData = (u8)((Data & 0x0000ff00) >> 8);
PlatformIOWrite4Byte(dev, PhyAddr, Data);
- //for(TimeoutCounter = 10; TimeoutCounter > 0; TimeoutCounter--)
+ /* for(TimeoutCounter = 10; TimeoutCounter > 0; TimeoutCounter--) */
{
PlatformIOWrite4Byte(dev, PhyAddr, Data & 0xffffff7f);
RegisterContent = PlatformIORead1Byte(dev, PhyDataR);
- //if(UCharData == RegisterContent)
- // break;
+ /*if(UCharData == RegisterContent) */
+ /* break; */
}
}
@@ -438,7 +413,7 @@ ReadBBPortUchar(
u32 addr
)
{
- //u8 TimeoutCounter;
+ /*u8 TimeoutCounter; */
u8 RegisterContent;
PlatformIOWrite4Byte(dev, PhyAddr, addr & 0xffffff7f);
@@ -446,93 +421,87 @@ ReadBBPortUchar(
return RegisterContent;
}
-//{by amy 080312
-//
-// Description:
-// Perform Antenna settings with antenna diversity on 87SE.
-// Created by Roger, 2008.01.25.
-//
+/* {by amy 080312 */
+/*
+ Description:
+ Perform Antenna settings with antenna diversity on 87SE.
+ Created by Roger, 2008.01.25.
+*/
bool
SetAntennaConfig87SE(
struct net_device *dev,
- u8 DefaultAnt, // 0: Main, 1: Aux.
- bool bAntDiversity // 1:Enable, 0: Disable.
+ u8 DefaultAnt, /* 0: Main, 1: Aux. */
+ bool bAntDiversity /* 1:Enable, 0: Disable. */
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bAntennaSwitched = true;
- //printk("SetAntennaConfig87SE(): DefaultAnt(%d),
bAntDiversity(%d)\n", DefaultAnt, bAntDiversity);
+ /* printk("SetAntennaConfig87SE(): DefaultAnt(%d),
bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */
- // Threshold for antenna diversity.
- write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
+ /* Threshold for antenna diversity. */
+ write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
- if( bAntDiversity ) // Enable Antenna Diversity.
- {
- if( DefaultAnt == 1 ) // aux antenna
- {
- // Mac register, aux antenna
+ if (bAntDiversity) { /* Enable Antenna Diversity. */
+ if (DefaultAnt == 1) { /* aux antenna */
+
+ /* Mac register, aux antenna */
write_nic_byte(dev, ANTSEL, 0x00);
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb
- write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7
+ /* Config CCK RX antenna. */
+ write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
+ write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0D, 0x54); // Reg0d : 54
- write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2
- }
- else // use main antenna
- {
- // Mac register, main antenna
+ /* Config OFDM RX antenna. */
+ write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
+ write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */
+ } else { /* use main antenna */
+ /* Mac register, main antenna */
write_nic_byte(dev, ANTSEL, 0x03);
- //base band
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b
- write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7
-
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0d, 0x5c); // Reg0d : 5c
- write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2
+ /* base band */
+ /* Config CCK RX antenna. */
+ write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
+ write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
+
+ /* Config OFDM RX antenna. */
+ write_phy_ofdm(dev, 0x0d, 0x5c); /* Reg0d : 5c */
+ write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */
}
- }
- else // Disable Antenna Diversity.
- {
- if( DefaultAnt == 1 ) // aux Antenna
- {
- // Mac register, aux antenna
+ } else {
+ /* Disable Antenna Diversity. */
+ if (DefaultAnt == 1) { /* aux Antenna */
+ /* Mac register, aux antenna */
write_nic_byte(dev, ANTSEL, 0x00);
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb
- write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47
+ /* Config CCK RX antenna. */
+ write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
+ write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0D, 0x54); // Reg0d : 54
- write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32
- }
- else // main Antenna
- {
- // Mac register, main antenna
+ /* Config OFDM RX antenna. */
+ write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
+ write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */
+ } else { /* main Antenna */
+ /* Mac register, main antenna */
write_nic_byte(dev, ANTSEL, 0x03);
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b
- write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47
+ /* Config CCK RX antenna. */
+ write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
+ write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0D, 0x5c); // Reg0d : 5c
- write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32
+ /* Config OFDM RX antenna. */
+ write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
+ write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */
}
}
- priv->CurrAntennaIndex = DefaultAnt; // Update default settings.
+ priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
return bAntennaSwitched;
}
-//by amy 080312
-/*---------------------------------------------------------------
- * Hardware Initialization.
- * the code is ported from Windows source code
- ----------------------------------------------------------------*/
+/* by amy 080312 */
+/*
+---------------------------------------------------------------
+ * Hardware Initialization.
+ * the code is ported from Windows source code
+----------------------------------------------------------------*/
void
ZEBRA_Config_85BASIC_HardCode(
@@ -542,36 +511,38 @@ ZEBRA_Config_85BASIC_HardCode(
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u32 i;
- u32 addr,data;
+ u32 addr, data;
u32 u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24;
- u8 u1b24E;
+ u8 u1b24E;
int d_cut = 0;
- //=============================================================================
- // 87S_PCIE :: RADIOCFG.TXT
- //=============================================================================
+/*
+=============================================================================
+ 87S_PCIE :: RADIOCFG.TXT
+=============================================================================
+*/
- // Page1 : reg16-reg30
- RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); // switch to page1
- u4bRF23= RF_ReadReg(dev, 0x08); mdelay(1);
- u4bRF24= RF_ReadReg(dev, 0x09); mdelay(1);
+ /* Page1 : reg16-reg30 */
+ RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */
+ u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1);
+ u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1);
if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
d_cut = 1;
printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n");
}
- // Page0 : reg0-reg15
+ /* Page0 : reg0-reg15 */
- RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);// 1
+ RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */
RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1);
- RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);// 2
+ RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */
- RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);// 3
+ RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */
RF_WriteReg(dev, 0x04, 0x0975); mdelay(1);
RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1);
@@ -587,7 +558,7 @@ ZEBRA_Config_85BASIC_HardCode(
RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1);
- // Page1 : reg16-reg30
+ /* Page1 : reg16-reg30 */
RF_WriteReg(dev, 0x00, 0x013f); mdelay(1);
RF_WriteReg(dev, 0x03, 0x0806); mdelay(1);
@@ -598,143 +569,142 @@ ZEBRA_Config_85BASIC_HardCode(
RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1);
-// Don't write RF23/RF24 to make a difference between 87S C cut and D
cut. asked by SD3 stevenl.
+/* Don't write RF23/RF24 to make a difference between 87S C cut and D
cut. asked by SD3 stevenl. */
RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1);
if (d_cut) {
RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
- RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); // RX LO buffer
- } else {
+ RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */
+ } else {
RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
- RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); // RX LO buffer
+ RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */
}
RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
- RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1);// 6
+ RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */
RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1);
RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1);
- for(i=0;i<=36;i++)
- {
+ for (i = 0; i <= 36; i++) {
RF_WriteReg(dev, 0x01, i); mdelay(1);
RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
}
- RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /// 203, 343
- RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); // 400
+ RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */
+ RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */
- RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); // switch to
reg16-reg30, and HSSI disable 137
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to
reg16-reg30, and HSSI disable 137 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
- RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); // Z4 synthesizer loop
filter setting, 392
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop
filter setting, 392 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
- RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); // switch to
reg0-reg15, and HSSI disable
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to
reg0-reg15, and HSSI disable */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
- RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); // CBC on, Tx Rx
disable, High gain
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx
disable, High gain */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
- RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); // Z4 setted channel 1
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
- RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); // LC calibration
- mdelay(200); // Deay 200 ms. //0xfd
- mdelay(10); // Deay 10 ms. //0xfd
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */
+ mdelay(200); /* Deay 200 ms. */ /* 0xfd */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ mdelay(10); /* Deay 10 ms. * /* 0xfd */
- RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); // switch to
reg16-reg30 137, and HSSI disable 137
- mdelay(10); // Deay 10 ms. //0xfd
+ RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to
reg16-reg30 137, and HSSI disable 137 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
RF_WriteReg(dev, 0x07, 0x0000); mdelay(1);
RF_WriteReg(dev, 0x07, 0x0180); mdelay(1);
RF_WriteReg(dev, 0x07, 0x0220); mdelay(1);
RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1);
- // DAC calibration off 20070702
+ /* DAC calibration off 20070702 */
RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1);
RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
-//{by amy 080312
- // For crystal calibration, added by Roger, 2007.12.11.
- if( priv->bXtalCalibration ) // reg 30.
- { // enable crystal calibration.
- // RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0].
- // (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
- // (3)RF signal on/off when calibration[13], default: on, set BIT13=0.
- // So we should minus 4 BITs offset.
- RF_WriteReg(dev, 0x0f,
(priv->XtalCal_Xin<<5)|(priv->XtalCal_Xout<<1)|BIT11|BIT9); mdelay(1);
+/* {by amy 080312 */
+ /* For crystal calibration, added by Roger, 2007.12.11. */
+ if (priv->bXtalCalibration) { /* reg 30. */
+ /* enable crystal calibration.
+ RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0].
+ (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
+ (3)RF signal on/off when calibration[13], default: on, set BIT13=0.
+ So we should minus 4 BITs offset. */
+ RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
(priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
- (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11| BIT9);
- }
- else
- { // using default value. Xin=6, Xout=6.
+ (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
+ } else {
+ /* using default value. Xin=6, Xout=6. */
RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
}
-//by amy 080312
-
- RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); // switch to
reg0-reg15, and HSSI enable
- RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); // Rx BB start
calibration, 00c//+edward
- RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); // temperature meter off
- RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); // Rx mode
- mdelay(10); // Deay 10 ms. //0xfe
- mdelay(10); // Deay 10 ms. //0xfe
- mdelay(10); // Deay 10 ms. //0xfe
- RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); // Rx mode//+edward
- RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); // Rx mode//+edward
- RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); // Rx mode//+edward
-
- RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); // Rx mode//+edward
- RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); // Rx mode//+edward
- //power save parameters.
+/* by amy 080312 */
+
+ RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to
reg0-reg15, and HSSI enable */
+ RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start
calibration, 00c//+edward */
+ RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */
+ RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */
+ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
+ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
+ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
+ RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */
+
+ RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */
+ /* power save parameters. */
u1b24E = read_nic_byte(dev, 0x24E);
write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
- //=============================================================================
-
- //=============================================================================
- // CCKCONF.TXT
- //=============================================================================
+ /*=============================================================================
+ =============================================================================
+ CCKCONF.TXT
+ =============================================================================
+ */
/* [POWER SAVE] Power Saving Parameters by jong. 2007-11-27
- CCK reg0x00[7]=1'b1 :power saving for TX (default)
+ CCK reg0x00[7]=1'b1 :power saving for TX (default)
CCK reg0x00[6]=1'b1: power saving for RX (default)
CCK reg0x06[4]=1'b1: turn off channel estimation related circuits
if not doing channel estimation.
CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
*/
- write_phy_cck(dev,0x00,0xc8);
- write_phy_cck(dev,0x06,0x1c);
- write_phy_cck(dev,0x10,0x78);
- write_phy_cck(dev,0x2e,0xd0);
- write_phy_cck(dev,0x2f,0x06);
- write_phy_cck(dev,0x01,0x46);
+ write_phy_cck(dev, 0x00, 0xc8);
+ write_phy_cck(dev, 0x06, 0x1c);
+ write_phy_cck(dev, 0x10, 0x78);
+ write_phy_cck(dev, 0x2e, 0xd0);
+ write_phy_cck(dev, 0x2f, 0x06);
+ write_phy_cck(dev, 0x01, 0x46);
- // power control
+ /* power control */
write_nic_byte(dev, CCK_TXAGC, 0x10);
write_nic_byte(dev, OFDM_TXAGC, 0x1B);
write_nic_byte(dev, ANTSEL, 0x03);
- //=============================================================================
- // AGC.txt
- //=============================================================================
+ /*
+ =============================================================================
+ AGC.txt
+ =============================================================================
+ */
write_phy_ofdm(dev, 0x00, 0x12);
- for (i=0; i<128; i++)
- {
+ for (i = 0; i < 128; i++) {
data = ZEBRA_AGC[i+1];
data = data << 8;
data = data | 0x0000008F;
- addr = i + 0x80; //enable writing AGC table
+ addr = i + 0x80; /* enable writing AGC table */
addr = addr << 8;
addr = addr | 0x0000008E;
@@ -743,18 +713,19 @@ ZEBRA_Config_85BASIC_HardCode(
WriteBBPortUchar(dev, 0x0000008E);
}
- PlatformIOWrite4Byte( dev, PhyAddr, 0x00001080); // Annie, 2006-05-05
+ PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080); /* Annie, 2006-05-05 */
- //=============================================================================
+ /*
+ =============================================================================
- //=============================================================================
- // OFDMCONF.TXT
- //=============================================================================
+ =============================================================================
+ OFDMCONF.TXT
+ =============================================================================
+ */
- for(i=0; i<60; i++)
- {
- u4bRegOffset=i;
- u4bRegValue=OFDM_CONFIG[i];
+ for (i = 0; i < 60; i++) {
+ u4bRegOffset = i;
+ u4bRegValue = OFDM_CONFIG[i];
WriteBBPortUchar(dev,
(0x00000080 |
@@ -762,14 +733,16 @@ ZEBRA_Config_85BASIC_HardCode(
((u4bRegValue & 0xff) << 8)));
}
- //=============================================================================
-//by amy for antenna
- //=============================================================================
-//{by amy 080312
- // Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26.
+ /*
+ =============================================================================
+ by amy for antenna
+ =============================================================================
+ */
+/* {by amy 080312 */
+ /* Config Sw/Hw Combinational Antenna Diversity. Added by Roger,
2008.02.26. */
SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
-//by amy 080312}
-//by amy for antenna
+/* by amy 080312} */
+/* by amy for antenna */
}
@@ -780,13 +753,13 @@ UpdateInitialGain(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- //lzm add 080826
- if(priv->eRFPowerState != eRfOn)
- {
- //Don't access BB/RF under disable PLL situation.
- //RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
pHalData->eRFPowerState!=eRfOn\n"));
- // Back to the original state
- priv->InitialGain= priv->InitialGainBackUp;
+ /* lzm add 080826 */
+ if (priv->eRFPowerState != eRfOn) {
+ /* Don't access BB/RF under disable PLL situation.
+ RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
pHalData->eRFPowerState!=eRfOn\n"));
+ Back to the original state
+ */
+ priv->InitialGain = priv->InitialGainBackUp;
return;
}
@@ -846,11 +819,11 @@ UpdateInitialGain(
break;
}
}
-//
-// Description:
-// Tx Power tracking mechanism routine on 87SE.
-// Created by Roger, 2007.12.11.
-//
+/*
+ Description:
+ Tx Power tracking mechanism routine on 87SE.
+ Created by Roger, 2007.12.11.
+*/
void
InitTxPwrTracking87SE(
struct net_device *dev
@@ -860,7 +833,7 @@ InitTxPwrTracking87SE(
u4bRfReg = RF_ReadReg(dev, 0x02);
- // Enable Thermal meter indication.
+ /* Enable Thermal meter indication. */
RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1);
}
@@ -870,28 +843,27 @@ PhyConfig8185(
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- write_nic_dword(dev, RCR, priv->ReceiveConfig);
+ write_nic_dword(dev, RCR, priv->ReceiveConfig);
priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
/* RF config */
ZEBRA_Config_85BASIC_HardCode(dev);
-//{by amy 080312
- // Set default initial gain state to 4, approved by SD3 DZ, by
Bruce, 2007-06-06.
- if(priv->bDigMechanism)
- {
- if(priv->InitialGain == 0)
+/* {by amy 080312 */
+ /* Set default initial gain state to 4, approved by SD3 DZ, by
Bruce, 2007-06-06. */
+ if (priv->bDigMechanism) {
+ if (priv->InitialGain == 0)
priv->InitialGain = 4;
}
- //
- // Enable thermal meter indication to implement TxPower tracking on 87SE.
- // We initialize thermal meter here to avoid unsuccessful configuration.
- // Added by Roger, 2007.12.11.
- //
- if(priv->bTxPowerTrack)
+ /*
+ Enable thermal meter indication to implement TxPower tracking on 87SE.
+ We initialize thermal meter here to avoid unsuccessful configuration.
+ Added by Roger, 2007.12.11.
+ */
+ if (priv->bTxPowerTrack)
InitTxPwrTracking87SE(dev);
-//by amy 080312}
- priv->InitialGainBackUp= priv->InitialGain;
+/* by amy 080312} */
+ priv->InitialGainBackUp = priv->InitialGain;
UpdateInitialGain(dev);
return;
@@ -902,63 +874,56 @@ HwConfigureRTL8185(
struct net_device *dev
)
{
- //RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control.
- u8 bUNIVERSAL_CONTROL_RL = 0;
+ /* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
+ u8 bUNIVERSAL_CONTROL_RL = 0;
u8 bUNIVERSAL_CONTROL_AGC = 1;
u8 bUNIVERSAL_CONTROL_ANT = 1;
u8 bAUTO_RATE_FALLBACK_CTL = 1;
u8 val8;
- write_nic_word(dev, BRSR, 0x0fff);
- // Retry limit
+ write_nic_word(dev, BRSR, 0x0fff);
+ /* Retry limit */
val8 = read_nic_byte(dev, CW_CONF);
- if(bUNIVERSAL_CONTROL_RL)
+ if (bUNIVERSAL_CONTROL_RL)
val8 = val8 & 0xfd;
else
val8 = val8 | 0x02;
write_nic_byte(dev, CW_CONF, val8);
- // Tx AGC
+ /* Tx AGC */
val8 = read_nic_byte(dev, TXAGC_CTL);
- if(bUNIVERSAL_CONTROL_AGC)
- {
+ if (bUNIVERSAL_CONTROL_AGC) {
write_nic_byte(dev, CCK_TXAGC, 128);
write_nic_byte(dev, OFDM_TXAGC, 128);
val8 = val8 & 0xfe;
- }
- else
- {
+ } else {
val8 = val8 | 0x01 ;
}
write_nic_byte(dev, TXAGC_CTL, val8);
- // Tx Antenna including Feedback control
- val8 = read_nic_byte(dev, TXAGC_CTL );
+ /* Tx Antenna including Feedback control */
+ val8 = read_nic_byte(dev, TXAGC_CTL);
- if(bUNIVERSAL_CONTROL_ANT)
- {
+ if (bUNIVERSAL_CONTROL_ANT) {
write_nic_byte(dev, ANTSEL, 0x00);
val8 = val8 & 0xfd;
- }
- else
- {
- val8 = val8 & (val8|0x02); //xiong-2006-11-15
+ } else {
+ val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */
}
write_nic_byte(dev, TXAGC_CTL, val8);
- // Auto Rate fallback control
+ /* Auto Rate fallback control */
val8 = read_nic_byte(dev, RATE_FALLBACK);
val8 &= 0x7c;
- if( bAUTO_RATE_FALLBACK_CTL )
- {
+ if (bAUTO_RATE_FALLBACK_CTL) {
val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
- // <RJ_TODO_8185B> We shall set up the ARFR according to user's setting.
- PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps.
+ /* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */
+ PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */
}
write_nic_byte(dev, RATE_FALLBACK, val8);
}
@@ -967,32 +932,31 @@ static void
MacConfig_85BASIC_HardCode(
struct net_device *dev)
{
- //============================================================================
- // MACREG.TXT
- //============================================================================
+ /*
+ ============================================================================
+ MACREG.TXT
+ ============================================================================
+ */
int nLinesRead = 0;
- u32 u4bRegOffset, u4bRegValue,u4bPageIndex = 0;
+ u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
int i;
- nLinesRead=sizeof(MAC_REG_TABLE)/2;
+ nLinesRead = sizeof(MAC_REG_TABLE)/2;
+
+ for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
+ u4bRegOffset = MAC_REG_TABLE[i][0];
+ u4bRegValue = MAC_REG_TABLE[i][1];
+
+ if (u4bRegOffset == 0x5e)
+ u4bPageIndex = u4bRegValue;
+
+ else
+ u4bRegOffset |= (u4bPageIndex << 8);
- for(i = 0; i < nLinesRead; i++) //nLinesRead=101
- {
- u4bRegOffset=MAC_REG_TABLE[i][0];
- u4bRegValue=MAC_REG_TABLE[i][1];
-
- if(u4bRegOffset == 0x5e)
- {
- u4bPageIndex = u4bRegValue;
- }
- else
- {
- u4bRegOffset |= (u4bPageIndex << 8);
- }
write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
}
- //============================================================================
+ /* ============================================================================
*/
}
static void
@@ -1000,34 +964,34 @@ MacConfig_85BASIC(
struct net_device *dev)
{
- u8 u1DA;
+ u8 u1DA;
MacConfig_85BASIC_HardCode(dev);
- //============================================================================
+ /* ============================================================================
*/
- // Follow TID_AC_MAP of WMac.
+ /* Follow TID_AC_MAP of WMac. */
write_nic_word(dev, TID_AC_MAP, 0xfa50);
- // Interrupt Migration, Jong suggested we use set 0x0000 first,
2005.12.14, by rcnjko.
+ /* Interrupt Migration, Jong suggested we use set 0x0000 first,
2005.12.14, by rcnjko. */
write_nic_word(dev, IntMig, 0x0000);
- // Prevent TPC to cause CRC error. Added by Annie, 2006-06-10.
+ /* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */
PlatformIOWrite4Byte(dev, 0x1F0, 0x00000000);
PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000);
PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
- // Asked for by SD3 CM Lin, 2006.06.27, by rcnjko.
- // power save parameter based on "87SE power save parameters
20071127.doc", as follow.
+ /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
+ /* power save parameter based on "87SE power save parameters
20071127.doc", as follow. */
- //Enable DA10 TX power saving
+ /* Enable DA10 TX power saving */
u1DA = read_nic_byte(dev, PHYPR);
- write_nic_byte(dev, PHYPR, (u1DA | BIT2) );
+ write_nic_byte(dev, PHYPR, (u1DA | BIT2));
- //POWER:
+ /* POWER: */
write_nic_word(dev, 0x360, 0x1000);
write_nic_word(dev, 0x362, 0x1000);
- // AFE.
+ /* AFE. */
write_nic_word(dev, 0x370, 0x0560);
write_nic_word(dev, 0x372, 0x0560);
write_nic_word(dev, 0x374, 0x0DA4);
@@ -1035,8 +999,8 @@ MacConfig_85BASIC(
write_nic_word(dev, 0x378, 0x0560);
write_nic_word(dev, 0x37A, 0x0560);
write_nic_word(dev, 0x37C, 0x00EC);
- write_nic_word(dev, 0x37E, 0x00EC);//+edward
- write_nic_byte(dev, 0x24E,0x01);
+ write_nic_word(dev, 0x37E, 0x00EC); /*+edward */
+ write_nic_byte(dev, 0x24E, 0x01);
}
u8
@@ -1064,63 +1028,60 @@ ActUpdateChannelAccessSetting(
u8 bFollowLegacySetting = 0;
u8 u1bAIFS;
- //
- // <RJ_TODO_8185B>
- // TODO: We still don't know how to set up these registers, just
follow WMAC to
- // verify 8185B FPAG.
- //
- // <RJ_TODO_8185B>
- // Jong said CWmin/CWmax register are not functional in 8185B,
- // so we shall fill channel access realted register into AC
parameter registers,
- // even in nQBss.
- //
- ChnlAccessSetting->SIFS_Timer = 0x22; // Suggested by Jong, 2005.12.08.
- ChnlAccessSetting->DIFS_Timer = 0x1C; // 2006.06.02, by rcnjko.
- ChnlAccessSetting->SlotTimeTimer = 9; // 2006.06.02, by rcnjko.
- ChnlAccessSetting->EIFS_Timer = 0x5B; // Suggested by wcchu, it is
the default value of EIFS register, 2005.12.08.
- ChnlAccessSetting->CWminIndex = 3; // 2006.06.02, by rcnjko.
- ChnlAccessSetting->CWmaxIndex = 7; // 2006.06.02, by rcnjko.
+ /*
+ <RJ_TODO_8185B>
+ TODO: We still don't know how to set up these registers, just follow WMAC to
+ verify 8185B FPAG.
+
+ <RJ_TODO_8185B>
+ Jong said CWmin/CWmax register are not functional in 8185B,
+ so we shall fill channel access realted register into AC parameter registers,
+ even in nQBss.
+ */
+ ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
+ ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is
the default value of EIFS register, 2005.12.08. */
+ ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
- write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); //
Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie,
2006-03-29.
+ write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /*
Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie,
2006-03-29. */
- u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer );
+ u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer);
write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer);
- write_nic_byte(dev, AckTimeOutReg, 0x5B); // <RJ_EXPR_QOS> Suggested
by wcchu, it is the default value of EIFS register, 2005.12.08.
+ write_nic_byte(dev, AckTimeOutReg, 0x5B); /* <RJ_EXPR_QOS> Suggested
by wcchu, it is the default value of EIFS register, 2005.12.08. */
- { // Legacy 802.11.
+ { /* Legacy 802.11. */
bFollowLegacySetting = 1;
}
- // this setting is copied from rtl8187B. xiong-2006-11-13
- if(bFollowLegacySetting)
- {
-
+ /* this setting is copied from rtl8187B. xiong-2006-11-13 */
+ if (bFollowLegacySetting) {
- //
- // Follow 802.11 seeting to AC parameter, all AC shall use the same
parameter.
- // 2005.12.01, by rcnjko.
- //
+ /*
+ Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
+ 2005.12.01, by rcnjko.
+ */
AcParam.longData = 0;
- AcParam.f.AciAifsn.f.AIFSN = 2; // Follow 802.11 DIFS.
+ AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */
AcParam.f.AciAifsn.f.ACM = 0;
- AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; // Follow
802.11 CWmin.
- AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; // Follow
802.11 CWmax.
+ AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow
802.11 CWmin. */
+ AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow
802.11 CWmax. */
AcParam.f.TXOPLimit = 0;
- //lzm reserved 080826
- // For turbo mode setting. port from 87B by Isaiah 2008-08-01
- if( ieee->current_network.Turbo_Enable == 1 )
+ /* lzm reserved 080826 */
+ /* For turbo mode setting. port from 87B by Isaiah 2008-08-01 */
+ if (ieee->current_network.Turbo_Enable == 1)
AcParam.f.TXOPLimit = 0x01FF;
- // For 87SE with Intel 4965 Ad-Hoc mode have poor throughput (19MB)
+ /* For 87SE with Intel 4965 Ad-Hoc mode have poor throughput (19MB) */
if (ieee->iw_mode == IW_MODE_ADHOC)
AcParam.f.TXOPLimit = 0x0020;
- for(eACI = 0; eACI < AC_MAX; eACI++)
- {
+ for (eACI = 0; eACI < AC_MAX; eACI++) {
AcParam.f.AciAifsn.f.ACI = (u8)eACI;
{
PAC_PARAM pAcParam = (PAC_PARAM)(&AcParam);
@@ -1128,85 +1089,81 @@ ActUpdateChannelAccessSetting(
u8 u1bAIFS;
u32 u4bAcParam;
- // Retrive paramters to udpate.
+ /* Retrive paramters to udpate. */
eACI = pAcParam->f.AciAifsn.f.ACI;
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN *
ChnlAccessSetting->SlotTimeTimer + aSifsTime;
- u4bAcParam = ( (((u32)(pAcParam->f.TXOPLimit)) <<
AC_PARAM_TXOP_LIMIT_OFFSET) |
+ u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) <<
AC_PARAM_TXOP_LIMIT_OFFSET) |
(((u32)(pAcParam->f.Ecw.f.ECWmax)) << AC_PARAM_ECW_MAX_OFFSET) |
(((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET) |
(((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET));
- switch(eACI)
- {
- case AC1_BK:
- //write_nic_dword(dev, AC_BK_PARAM, u4bAcParam);
- break;
+ switch (eACI) {
+ case AC1_BK:
+ /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
+ break;
- case AC0_BE:
- //write_nic_dword(dev, AC_BE_PARAM, u4bAcParam);
- break;
+ case AC0_BE:
+ /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
+ break;
- case AC2_VI:
- //write_nic_dword(dev, AC_VI_PARAM, u4bAcParam);
- break;
+ case AC2_VI:
+ /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
+ break;
- case AC3_VO:
- //write_nic_dword(dev, AC_VO_PARAM, u4bAcParam);
- break;
+ case AC3_VO:
+ /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
+ break;
- default:
- DMESGW( "SetHwReg8185(): invalid ACI: %d !\n", eACI);
- break;
+ default:
+ DMESGW("SetHwReg8185(): invalid ACI: %d !\n", eACI);
+ break;
}
- // Cehck ACM bit.
- // If it is set, immediately set ACM control bit to downgrading
AC for passing WMM testplan. Annie, 2005-12-13.
+ /* Cehck ACM bit. */
+ /* If it is set, immediately set ACM control bit to downgrading
AC for passing WMM testplan. Annie, 2005-12-13. */
{
PACI_AIFSN pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn);
AC_CODING eACI = pAciAifsn->f.ACI;
- //modified Joseph
- //for 8187B AsynIORead issue
+ /*modified Joseph */
+ /*for 8187B AsynIORead issue */
u8 AcmCtrl = 0;
- if( pAciAifsn->f.ACM )
- { // ACM bit is 1.
- switch(eACI)
- {
- case AC0_BE:
- AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); // or 0x21
- break;
-
- case AC2_VI:
- AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); // or 0x42
- break;
-
- case AC3_VO:
- AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); // or 0x84
- break;
-
- default:
- DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed:
eACI is %d\n", eACI );
- break;
+ if (pAciAifsn->f.ACM) {
+ /* ACM bit is 1. */
+ switch (eACI) {
+ case AC0_BE:
+ AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */
+ break;
+
+ case AC2_VI:
+ AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */
+ break;
+
+ case AC3_VO:
+ AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */
+ break;
+
+ default:
+ DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI
is %d\n", eACI);
+ break;
}
- }
- else
- { // ACM bit is 0.
- switch(eACI)
- {
- case AC0_BE:
- AcmCtrl &= ( (~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)
); // and 0xDE
- break;
-
- case AC2_VI:
- AcmCtrl &= ( (~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)
); // and 0xBD
- break;
-
- case AC3_VO:
- AcmCtrl &= ( (~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)
); // and 0x7B
- break;
-
- default:
- break;
+ } else {
+ /* ACM bit is 0. */
+ switch (eACI) {
+ case AC0_BE:
+ AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /*
and 0xDE */
+ break;
+
+ case AC2_VI:
+ AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /*
and 0xBD */
+ break;
+
+ case AC3_VO:
+ AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /*
and 0x7B */
+ break;
+
+ default:
+ break;
}
}
write_nic_byte(dev, ACM_CONTROL, 0);
@@ -1226,33 +1183,26 @@ ActSetWirelessMode8185(
struct ieee80211_device *ieee = priv->ieee80211;
u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
- if( (btWirelessMode & btSupportedWirelessMode) == 0 )
- { // Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko.
+ if ((btWirelessMode & btSupportedWirelessMode) == 0) {
+ /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
btWirelessMode, btSupportedWirelessMode);
return;
}
- // 1. Assign wireless mode to swtich if necessary.
- if (btWirelessMode == WIRELESS_MODE_AUTO)
- {
- if((btSupportedWirelessMode & WIRELESS_MODE_A))
- {
+ /* 1. Assign wireless mode to swtich if necessary. */
+ if (btWirelessMode == WIRELESS_MODE_AUTO) {
+ if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
btWirelessMode = WIRELESS_MODE_A;
- }
- else if((btSupportedWirelessMode & WIRELESS_MODE_G))
- {
- btWirelessMode = WIRELESS_MODE_G;
- }
- else if((btSupportedWirelessMode & WIRELESS_MODE_B))
- {
- btWirelessMode = WIRELESS_MODE_B;
- }
- else
- {
- DMESGW("ActSetWirelessMode8185(): No valid wireless mode
supported, btSupportedWirelessMode(%x)!!!\n",
- btSupportedWirelessMode);
- btWirelessMode = WIRELESS_MODE_B;
+ } else if (btSupportedWirelessMode & WIRELESS_MODE_G)) {
+ btWirelessMode = WIRELESS_MODE_G;
+
+ } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) {
+ btWirelessMode = WIRELESS_MODE_B;
+ } else {
+ DMESGW("ActSetWirelessMode8185(): No valid wireless mode
supported, btSupportedWirelessMode(%x)!!!\n",
+ btSupportedWirelessMode);
+ btWirelessMode = WIRELESS_MODE_B;
}
}
@@ -1262,15 +1212,13 @@ ActSetWirelessMode8185(
* Update current wireless mode if we swtich to specified band
successfully. */
ieee->mode = (WIRELESS_MODE)btWirelessMode;
- // 3. Change related setting.
- if( ieee->mode == WIRELESS_MODE_A ){
+ /* 3. Change related setting. /*
+ if( ieee->mode == WIRELESS_MODE_A ) {
DMESG("WIRELESS_MODE_A\n");
- }
- else if( ieee->mode == WIRELESS_MODE_B ){
- DMESG("WIRELESS_MODE_B\n");
- }
- else if( ieee->mode == WIRELESS_MODE_G ){
- DMESG("WIRELESS_MODE_G\n");
+ } else if( ieee->mode == WIRELESS_MODE_B ) {
+ DMESG("WIRELESS_MODE_B\n");
+ } else if( ieee->mode == WIRELESS_MODE_G ) {
+ DMESG("WIRELESS_MODE_G\n");
}
ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
}
@@ -1282,15 +1230,15 @@ void rtl8185b_irq_enable(struct net_device *dev)
priv->irq_enabled = 1;
write_nic_dword(dev, IMR, priv->IntrMask);
}
-//by amy for power save
+/* by amy for power save */
void
DrvIFIndicateDisassociation(
struct net_device *dev,
u16 reason
)
{
- // nothing is needed after disassociation request.
-}
+ /* nothing is needed after disassociation request. */
+ }
void
MgntDisconnectIBSS(
struct net_device *dev
@@ -1300,17 +1248,21 @@ MgntDisconnectIBSS(
u8 i;
DrvIFIndicateDisassociation(dev, unspec_reason);
- for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x55;
- priv->ieee80211->state = IEEE80211_NOLINK;
+ for (i = 0; i < 6 ; i++)
+ priv->ieee80211->current_network.bssid[i] = 0x55;
- //Stop Beacon.
- // Vista add a Adhoc profile, HW radio off untill OID_DOT11_RESET_REQUEST
- // Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
- // Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn
packet send.
- // Disable Beacon Queue Own bit, suggested by jong
+ priv->ieee80211->state = IEEE80211_NOLINK;
+ /*
+ Stop Beacon.
+
+ Vista add a Adhoc profile, HW radio off untill OID_DOT11_RESET_REQUEST
+ Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
+ Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
+
+ Disable Beacon Queue Own bit, suggested by jong */
ieee80211_stop_send_beacons(priv->ieee80211);
priv->ieee80211->link_change(dev);
@@ -1319,22 +1271,25 @@ MgntDisconnectIBSS(
void
MlmeDisassociateRequest(
struct net_device *dev,
- u8* asSta,
- u8 asRsn
+ u8 *asSta,
+ u8 asRsn
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u8 i;
- SendDisassociation(priv->ieee80211, asSta, asRsn );
+ SendDisassociation(priv->ieee80211, asSta, asRsn);
- if( memcmp(priv->ieee80211->current_network.bssid, asSta, 6 ) == 0 ){
- //ShuChen TODO: change media status.
- //ShuChen TODO: What to do when disassociate.
+ if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
+ /*ShuChen TODO: change media status. */
+ /*ShuChen TODO: What to do when disassociate. */
DrvIFIndicateDisassociation(dev, unspec_reason);
- for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x22;
+
+ for (i = 0; i < 6; i++)
+ priv->ieee80211->current_network.bssid[i] = 0x22;
+
ieee80211_disassociate(priv->ieee80211);
}
@@ -1348,15 +1303,15 @@ MgntDisconnectAP(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-//
-// Commented out by rcnjko, 2005.01.27:
-// I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
-//
-// //2004/09/15, kcwu, the key should be cleared, or the new
handshaking will not success
+ /*
+ Commented out by rcnjko, 2005.01.27:
+ I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
+
+ 2004/09/15, kcwu, the key should be cleared, or the new handshaking
will not success
- // In WPA WPA2 need to Clear all key ... because new key will set
after new handshaking.
- // 2004.10.11, by rcnjko.
- MlmeDisassociateRequest( dev, priv->ieee80211->current_network.bssid, asRsn );
+ In WPA WPA2 need to Clear all key ... because new key will set
after new handshaking.
+ 2004.10.11, by rcnjko. */
+ MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn);
priv->ieee80211->state = IEEE80211_NOLINK;
}
@@ -1367,40 +1322,37 @@ MgntDisconnect(
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- //
- // Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
- //
+ /*
+ Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
+ */
- if(IS_DOT11D_ENABLE(priv->ieee80211))
+ if (IS_DOT11D_ENABLE(priv->ieee80211))
Dot11d_Reset(priv->ieee80211);
- // In adhoc mode, update beacon frame.
- if( priv->ieee80211->state == IEEE80211_LINKED )
- {
- if( priv->ieee80211->iw_mode == IW_MODE_ADHOC )
- {
+ /* In adhoc mode, update beacon frame. */
+ if (priv->ieee80211->state == IEEE80211_LINKED) {
+ if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
MgntDisconnectIBSS(dev);
- }
- if( priv->ieee80211->iw_mode == IW_MODE_INFRA )
- {
- // We clear key here instead of MgntDisconnectAP() because that
- // MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
- // e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
- // used to handle disassociation related things to AP, e.g. send Disassoc
- // frame to AP. 2005.01.27, by rcnjko.
+
+ if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
+ /* We clear key here instead of MgntDisconnectAP() because that
+ MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
+ e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
+ used to handle disassociation related things to AP, e.g. send Disassoc
+ frame to AP. 2005.01.27, by rcnjko. */
MgntDisconnectAP(dev, asRsn);
}
- // Inidicate Disconnect, 2005.02.23, by rcnjko.
+ /* Inidicate Disconnect, 2005.02.23, by rcnjko. */
}
return true;
}
-//
-// Description:
-// Chang RF Power State.
-// Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
-//
-// Assumption:
-// PASSIVE LEVEL.
-//
+/*
+ Description:
+ Chang RF Power State.
+ Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
+
+ Assumption:
+ PASSIVE LEVEL.
+*/
bool
SetRFPowerState(
struct net_device *dev,
@@ -1410,10 +1362,8 @@ SetRFPowerState(
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bResult = false;
- if(eRFPowerState == priv->eRFPowerState)
- {
+ if (eRFPowerState == priv->eRFPowerState)
return bResult;
- }
bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
@@ -1442,83 +1392,70 @@ MgntActSet_RF_State(
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bActionAllowed = false;
bool bConnectBySSID = false;
- RT_RF_POWER_STATE rtState;
+ RT_RF_POWER_STATE rtState;
u16 RFWaitCounter = 0;
unsigned long flag;
- //
- // Prevent the race condition of RF state change. By Bruce, 2007-11-28.
- // Only one thread can change the RF state at one time, and others
should wait to be executed.
- //
- while(true)
- {
- spin_lock_irqsave(&priv->rf_ps_lock,flag);
- if(priv->RFChangeInProgress)
- {
- spin_unlock_irqrestore(&priv->rf_ps_lock,flag);
- // Set RF after the previous action is done.
- while(priv->RFChangeInProgress)
- {
- RFWaitCounter ++;
- udelay(1000); // 1 ms
-
- // Wait too long, return FALSE to avoid to be stuck here.
- if(RFWaitCounter > 1000) // 1sec
- {
+ /*
+ Prevent the race condition of RF state change. By Bruce, 2007-11-28.
+ Only one thread can change the RF state at one time, and others
should wait to be executed.
+ */
+ while (true) {
+ spin_lock_irqsave(&priv->rf_ps_lock, flag);
+ if (priv->RFChangeInProgress) {
+ spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
+ /* Set RF after the previous action is done. */
+ while (priv->RFChangeInProgress) {
+ RFWaitCounter++;
+ udelay(1000); /* 1 ms */
+
+ /* Wait too long, return FALSE to avoid to be stuck here. */
+ if (RFWaitCounter > 1000) { /* 1sec */
printk("MgntActSet_RF_State(): Wait too long to set RF\n");
- // TODO: Reset RF state?
+ /* TODO: Reset RF state? */
return false;
}
}
- }
- else
- {
+ } else {
priv->RFChangeInProgress = true;
- spin_unlock_irqrestore(&priv->rf_ps_lock,flag);
+ spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
break;
}
}
rtState = priv->eRFPowerState;
- switch(StateToSet)
- {
+ switch (StateToSet) {
case eRfOn:
- //
- // Turn On RF no matter the IPS setting because we need to update
the RF state to Ndis under Vista, or
- // the Windows does not allow the driver to perform site survey any
more. By Bruce, 2007-10-02.
- //
+ /*
+ Turn On RF no matter the IPS setting because we need to update the
RF state to Ndis under Vista, or
+ the Windows does not allow the driver to perform site survey any
more. By Bruce, 2007-10-02.
+ */
priv->RfOffReason &= (~ChangeSource);
- if(! priv->RfOffReason)
- {
+ if (!priv->RfOffReason) {
priv->RfOffReason = 0;
bActionAllowed = true;
- if(rtState == eRfOff && ChangeSource >=RF_CHANGE_BY_HW && !priv->bInHctTest)
- {
+ if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW &&
!priv->bInHctTest)
bConnectBySSID = true;
- }
- }
- else
- ;
+
+ } else
+ ;
break;
case eRfOff:
- // 070125, rcnjko: we always keep connected in AP mode.
+ /* 070125, rcnjko: we always keep connected in AP mode. */
- if (priv->RfOffReason > RF_CHANGE_BY_IPS)
- {
- //
- // 060808, Annie:
- // Disconnect to current BSS when radio off. Asked by QuanTa.
- //
-
- //
- // Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
- // because we do NOT need to set ssid to dummy ones.
- //
- MgntDisconnect( dev, disas_lv_ss );
-
- // Clear content of bssDesc[] and bssDesc4Query[] to avoid
reporting old bss to UI.
+ if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
+ /*
+ 060808, Annie:
+ Disconnect to current BSS when radio off. Asked by QuanTa.
+
+ Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
+ because we do NOT need to set ssid to dummy ones.
+ */
+ MgntDisconnect(dev, disas_lv_ss);
+
+ /* Clear content of bssDesc[] and bssDesc4Query[] to avoid
reporting old bss to UI. */
}
priv->RfOffReason |= ChangeSource;
@@ -1532,31 +1469,27 @@ MgntActSet_RF_State(
break;
}
- if(bActionAllowed)
- {
- // Config HW to the specified mode.
+ if (bActionAllowed) {
+ /* Config HW to the specified mode. */
SetRFPowerState(dev, StateToSet);
- // Turn on RF.
- if(StateToSet == eRfOn)
- {
+ /* Turn on RF. */
+ if (StateToSet == eRfOn) {
HalEnableRx8185Dummy(dev);
- if(bConnectBySSID)
- {
- // by amy not supported
- }
+ if (bConnectBySSID)
+ /* by amy not supported */
+
}
- // Turn off RF.
- else if(StateToSet == eRfOff)
- {
+ /* Turn off RF. */
+ else if (StateToSet == eRfOff)
HalDisableRx8185Dummy(dev);
- }
+
}
- // Release RF spinlock
- spin_lock_irqsave(&priv->rf_ps_lock,flag);
+ /* Release RF spinlock */
+ spin_lock_irqsave(&priv->rf_ps_lock, flag);
priv->RFChangeInProgress = false;
- spin_unlock_irqrestore(&priv->rf_ps_lock,flag);
+ spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
return bActionAllowed;
}
void
@@ -1565,28 +1498,28 @@ InactivePowerSave(
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- //
- // This flag "bSwRfProcessing", indicates the status of IPS
procedure, should be set if the IPS workitem
- // is really scheduled.
- // The old code, sets this flag before scheduling the IPS workitem
and however, at the same time the
- // previous IPS workitem did not end yet, fails to schedule the
current workitem. Thus, bSwRfProcessing
- // blocks the IPS procedure of switching RF.
- //
+ /*
+ This flag "bSwRfProcessing", indicates the status of IPS procedure,
should be set if the IPS workitem
+ is really scheduled.
+ The old code, sets this flag before scheduling the IPS workitem and
however, at the same time the
+ previous IPS workitem did not end yet, fails to schedule the
current workitem. Thus, bSwRfProcessing
+ blocks the IPS procedure of switching RF.
+ */
priv->bSwRfProcessing = true;
MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
- //
- // To solve CAM values miss in RF OFF, rewrite CAM values after RF
ON. By Bruce, 2007-09-20.
- //
+ /*
+ To solve CAM values miss in RF OFF, rewrite CAM values after RF ON.
By Bruce, 2007-09-20.
+ */
priv->bSwRfProcessing = false;
}
-//
-// Description:
-// Enter the inactive power save mode. RF will be off
-//
+/*
+ Description:
+ Enter the inactive power save mode. RF will be off
+*/
void
IPSEnter(
struct net_device *dev
@@ -1594,21 +1527,19 @@ IPSEnter(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
- if (priv->bInactivePs)
- {
+ if (priv->bInactivePs) {
rtState = priv->eRFPowerState;
- //
- // Do not enter IPS in the following conditions:
- // (1) RF is already OFF or Sleep
- // (2) bSwRfProcessing (indicates the IPS is still under going)
- // (3) Connectted (only disconnected can trigger IPS)
- // (4) IBSS (send Beacon)
- // (5) AP mode (send Beacon)
- //
+ /*
+ Do not enter IPS in the following conditions:
+ (1) RF is already OFF or Sleep
+ (2) bSwRfProcessing (indicates the IPS is still under going)
+ (3) Connectted (only disconnected can trigger IPS)
+ (4) IBSS (send Beacon)
+ (5) AP mode (send Beacon)
+ */
if (rtState == eRfOn && !priv->bSwRfProcessing
- && (priv->ieee80211->state != IEEE80211_LINKED ))
- {
+ && (priv->ieee80211->state != IEEE80211_LINKED)) {
priv->eInactivePowerState = eRfOff;
InactivePowerSave(dev);
}
@@ -1621,11 +1552,9 @@ IPSLeave(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
- if (priv->bInactivePs)
- {
+ if (priv->bInactivePs) {
rtState = priv->eRFPowerState;
- if ((rtState == eRfOff || rtState == eRfSleep) &&
(!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS)
- {
+ if ((rtState == eRfOff || rtState == eRfSleep) &&
(!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
priv->eInactivePowerState = eRfOn;
InactivePowerSave(dev);
}
@@ -1634,7 +1563,7 @@ IPSLeave(
void rtl8185b_adapter_start(struct net_device *dev)
{
- struct r8180_priv *priv = ieee80211_priv(dev);
+ struct r8180_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
u8 SupportedWirelessMode;
@@ -1645,141 +1574,133 @@ void rtl8185b_adapter_start(struct net_device *dev)
u8 TmpU1b;
u8 btPSR;
- write_nic_byte(dev,0x24e, (BIT5|BIT6|BIT0));
+ write_nic_byte(dev, 0x24e, (BIT5|BIT6|BIT0));
rtl8180_reset(dev);
priv->dma_poll_mask = 0;
priv->dma_poll_stop_mask = 0;
HwConfigureRTL8185(dev);
- write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]);
- write_nic_word(dev, MAC4, ((u32*)dev->dev_addr)[1] & 0xffff );
- write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); // default
network type to 'No Link'
+ write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
+ write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
+ write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default
network type to 'No Link' */
write_nic_word(dev, BcnItv, 100);
write_nic_word(dev, AtimWnd, 2);
PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
write_nic_byte(dev, WPA_CONFIG, 0);
MacConfig_85BASIC(dev);
- // Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko.
- // BT_DEMO_BOARD type
+ /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
+ /* BT_DEMO_BOARD type */
PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
- //-----------------------------------------------------------------------------
- // Set up PHY related.
- //-----------------------------------------------------------------------------
- // Enable Config3.PARAM_En to revise AnaaParm.
- write_nic_byte(dev, CR9346, 0xc0); // enable config register write
+ /*
+ -----------------------------------------------------------------------------
+ Set up PHY related.
+ -----------------------------------------------------------------------------
+ */
+ /* Enable Config3.PARAM_En to revise AnaaParm. */
+ write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
tmpu8 = read_nic_byte(dev, CONFIG3);
- write_nic_byte(dev, CONFIG3, (tmpu8 |CONFIG3_PARM_En) );
- // Turn on Analog power.
- // Asked for by William, otherwise, MAC 3-wire can't work,
2006.06.27, by rcnjko.
+ write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
+ /* Turn on Analog power. */
+ /* Asked for by William, otherwise, MAC 3-wire can't work,
2006.06.27, by rcnjko. */
write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
write_nic_word(dev, ANAPARAM3, 0x0010);
write_nic_byte(dev, CONFIG3, tmpu8);
write_nic_byte(dev, CR9346, 0x00);
- // enable EEM0 and EEM1 in 9346CR
+ /* enable EEM0 and EEM1 in 9346CR */
btCR9346 = read_nic_byte(dev, CR9346);
- write_nic_byte(dev, CR9346, (btCR9346|0xC0) );
+ write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
- // B cut use LED1 to control HW RF on/off
+ /* B cut use LED1 to control HW RF on/off */
TmpU1b = read_nic_byte(dev, CONFIG5);
TmpU1b = TmpU1b & ~BIT3;
- write_nic_byte(dev,CONFIG5, TmpU1b);
+ write_nic_byte(dev, CONFIG5, TmpU1b);
- // disable EEM0 and EEM1 in 9346CR
+ /* disable EEM0 and EEM1 in 9346CR */
btCR9346 &= ~(0xC0);
write_nic_byte(dev, CR9346, btCR9346);
- //Enable Led (suggested by Jong)
- // B-cut RF Radio on/off 5e[3]=0
+ /* Enable Led (suggested by Jong) */
+ /* B-cut RF Radio on/off 5e[3]=0 */
btPSR = read_nic_byte(dev, PSR);
write_nic_byte(dev, PSR, (btPSR | BIT3));
- // setup initial timing for RFE.
+ /* setup initial timing for RFE. */
write_nic_word(dev, RFPinsOutput, 0x0480);
SetOutputEnableOfRfPins(dev);
write_nic_word(dev, RFPinsSelect, 0x2488);
- // PHY config.
+ /* PHY config. */
PhyConfig8185(dev);
- // We assume RegWirelessMode has already been initialized before,
- // however, we has to validate the wireless mode here and provide a
- // reasonable initialized value if necessary. 2005.01.13, by rcnjko.
+ /*
+ We assume RegWirelessMode has already been initialized before,
+ however, we has to validate the wireless mode here and provide a
+ reasonable initialized value if necessary. 2005.01.13, by rcnjko.
+ */
SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
- if( (ieee->mode != WIRELESS_MODE_B) &&
+ if ((ieee->mode != WIRELESS_MODE_B) &&
(ieee->mode != WIRELESS_MODE_G) &&
(ieee->mode != WIRELESS_MODE_A) &&
- (ieee->mode != WIRELESS_MODE_AUTO))
- { // It should be one of B, G, A, or AUTO.
+ (ieee->mode != WIRELESS_MODE_AUTO)) {
+ /* It should be one of B, G, A, or AUTO. */
bInvalidWirelessMode = 1;
- }
- else
- { // One of B, G, A, or AUTO.
- // Check if the wireless mode is supported by RF.
- if( (ieee->mode != WIRELESS_MODE_AUTO) &&
- (ieee->mode & SupportedWirelessMode) == 0 )
- {
+ } else {
+ /* One of B, G, A, or AUTO. */
+ /* Check if the wireless mode is supported by RF. */
+ if ((ieee->mode != WIRELESS_MODE_AUTO) &&
+ (ieee->mode & SupportedWirelessMode) == 0) {
bInvalidWirelessMode = 1;
}
}
- if(bInvalidWirelessMode || ieee->mode==WIRELESS_MODE_AUTO)
- { // Auto or other invalid value.
- // Assigne a wireless mode to initialize.
- if((SupportedWirelessMode & WIRELESS_MODE_A))
- {
+ if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
+ /* Auto or other invalid value. */
+ /* Assigne a wireless mode to initialize. */
+ if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
InitWirelessMode = WIRELESS_MODE_A;
- }
- else if((SupportedWirelessMode & WIRELESS_MODE_G))
- {
+ } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
InitWirelessMode = WIRELESS_MODE_G;
- }
- else if((SupportedWirelessMode & WIRELESS_MODE_B))
- {
+ } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
InitWirelessMode = WIRELESS_MODE_B;
- }
- else
- {
+ } else {
DMESGW("InitializeAdapter8185(): No valid wireless mode supported,
SupportedWirelessMode(%x)!!!\n",
SupportedWirelessMode);
InitWirelessMode = WIRELESS_MODE_B;
}
- // Initialize RegWirelessMode if it is not a valid one.
- if(bInvalidWirelessMode)
- {
+ /* Initialize RegWirelessMode if it is not a valid one. */
+ if (bInvalidWirelessMode)
ieee->mode = (WIRELESS_MODE)InitWirelessMode;
- }
- }
- else
- { // One of B, G, A.
+
+ } else {
+ /* One of B, G, A. */
InitWirelessMode = ieee->mode;
}
-//by amy for power save
+/* by amy for power save */
priv->eRFPowerState = eRfOff;
priv->RfOffReason = 0;
{
MgntActSet_RF_State(dev, eRfOn, 0);
}
- //
- // If inactive power mode is enabled, disable rf while in disconnected state.
- //
+ /*
+ If inactive power mode is enabled, disable rf while in disconnected state.
+ */
if (priv->bInactivePs)
- {
- MgntActSet_RF_State(dev,eRfOff, RF_CHANGE_BY_IPS);
- }
-//by amy for power save
+ MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);
+
+/* by amy for power save */
ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
- //-----------------------------------------------------------------------------
+ /* -----------------------------------------------------------------------------
*/
rtl8185b_irq_enable(dev);
netif_start_queue(dev);
- }
+ }
void rtl8185b_rx_enable(struct net_device *dev)
{
@@ -1787,27 +1708,29 @@ void rtl8185b_rx_enable(struct net_device *dev)
/* for now we accept data, management & ctl frame*/
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- if (dev->flags & IFF_PROMISC) DMESG ("NIC in promisc mode");
- if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
- dev->flags & IFF_PROMISC){
- priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
+ if (dev->flags & IFF_PROMISC)
+ DMESG("NIC in promisc mode");
+
+ if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
+ dev->flags & IFF_PROMISC) {
+ priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
}
- if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){
+ if (priv->ieee80211->iw_mode == IW_MODE_MONITOR)
priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF | RCR_APWRMGT | RCR_AICV;
- }
- if( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
+
+ if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACRC32;
write_nic_dword(dev, RCR, priv->ReceiveConfig);
fix_rx_fifo(dev);
- cmd=read_nic_byte(dev,CMD);
- write_nic_byte(dev,CMD,cmd | (1<<CMD_RX_ENABLE_SHIFT));
+ cmd = read_nic_byte(dev, CMD);
+ write_nic_byte(dev, CMD, cmd | (1<<CMD_RX_ENABLE_SHIFT));
}
@@ -1824,7 +1747,7 @@ void rtl8185b_tx_enable(struct net_device *dev)
fix_tx_fifo(dev);
- cmd=read_nic_byte(dev,CMD);
- write_nic_byte(dev,CMD,cmd | (1<<CMD_TX_ENABLE_SHIFT));
+ cmd = read_nic_byte(dev, CMD);
+ write_nic_byte(dev, CMD, cmd | (1<<CMD_TX_ENABLE_SHIFT));
}
--
1.7.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists