| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Aug 2010 14:29:03 -0400 From: "John W. Linville" <linville@...driver.com> To: Thomas Fjellstrom <thomas@...llstrom.ca> Cc: linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: ath5k problem with 2.6.35 On Sun, Aug 22, 2010 at 01:53:41AM -0600, Thomas Fjellstrom wrote: > On August 22, 2010, Thomas Fjellstrom wrote: > > Hi, I'm running 2.6.35, and my wireless card fails to initialize properly > > on boot. I get the following messages in dmesg: > > Probably important, but I missed a couple lines: > > > [ 0.866525] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > > 17 [ 0.866536] ath5k 0000:02:00.0: setting latency timer to 64 > > [ 0.866571] ath5k 0000:02:00.0: registered as 'phy0' > > [ 1.358241] ath: EEPROM regdomain: 0x67 > > [ 1.358242] ath: EEPROM indicates we should expect a direct regpair map > > [ 1.358245] ath: Country alpha2 being used: 00 > > [ 1.358247] ath: Regpair used: 0x67 > [ 1.360589] phy0: Failed to initialize wep: -2 > > [ 1.372021] ath5k phy0: can't register ieee80211 hw > > [ 1.372080] ath5k 0000:02:00.0: PCI INT A disabled > > [ 1.372084] ath5k: probe of 0000:02:00.0 failed with error -2 Did you enable fips mode? John -- John W. Linville Someday the world will need a hero, and you linville@...driver.com might be all we have. Be ready. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists