linux-kernel - [PATCH 2/2] drivers/serial/bfin_5xx.c: Use pr_<level> and pr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <08a2d7676742798de74d69e34b6c175a17d4f96d.1282589920.git.joe@perches.com>
Date:	Mon, 23 Aug 2010 12:01:37 -0700
From:	Joe Perches <joe@...ches.com>
To:	linux-kernel@...r.kernel.org
Cc:	Sonic Zhang <sonic.zhang@...log.com>,
	uclinux-dist-devel@...ckfin.uclinux.org
Subject: [PATCH 2/2] drivers/serial/bfin_5xx.c: Use pr_<level> and pr_<fmt>

Also fix typo of length.

Signed-off-by: Joe Perches <joe@...ches.com>
---
 drivers/serial/bfin_5xx.c |   29 ++++++++++++++---------------
 1 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4e38f99..4c01ee6 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -8,6 +8,8 @@
  * Licensed under the GPL-2 or later.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
@@ -631,12 +633,12 @@ static int bfin_serial_startup(struct uart_port *port)
 	dma_addr_t dma_handle;
 
 	if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) {
-		printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n");
+		pr_notice("Unable to attach Blackfin UART RX DMA channel\n");
 		return -EBUSY;
 	}
 
 	if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) {
-		printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n");
+		pr_notice("Unable to attach Blackfin UART TX DMA channel\n");
 		free_dma(uart->rx_dma_channel);
 		return -EBUSY;
 	}
@@ -674,14 +676,14 @@ static int bfin_serial_startup(struct uart_port *port)
 # endif
 	if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
 	     "BFIN_UART_RX", uart)) {
-		printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
+		pr_notice("Unable to attach BlackFin UART RX interrupt\n");
 		return -EBUSY;
 	}
 
 	if (request_irq
 	    (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
 	     "BFIN_UART_TX", uart)) {
-		printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
+		pr_notice("Unable to attach BlackFin UART TX interrupt\n");
 		free_irq(uart->port.irq, uart);
 		return -EBUSY;
 	}
@@ -706,14 +708,14 @@ static int bfin_serial_startup(struct uart_port *port)
 
 		if (uart_dma_ch_rx &&
 			request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
-			printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+			pr_notice("Fail to attach UART interrupt\n");
 			free_irq(uart->port.irq, uart);
 			free_irq(uart->port.irq + 1, uart);
 			return -EBUSY;
 		}
 		if (uart_dma_ch_tx &&
 			request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
-			printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+			pr_notice("Fail to attach UART interrupt\n");
 			free_dma(uart_dma_ch_rx);
 			free_irq(uart->port.irq, uart);
 			free_irq(uart->port.irq + 1, uart);
@@ -734,8 +736,7 @@ static int bfin_serial_startup(struct uart_port *port)
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 			IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
 			uart->cts_pin = -1;
-			pr_info("Unable to attach BlackFin UART CTS interrupt. "
-				"So, disable it.\n");
+			pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
 		}
 	}
 	if (uart->rts_pin >= 0) {
@@ -747,8 +748,7 @@ static int bfin_serial_startup(struct uart_port *port)
 	if (request_irq(uart->status_irq,
 		bfin_serial_mctrl_cts_int,
 		IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
-		pr_info("Unable to attach BlackFin UART Modem "
-			"Status interrupt.\n");
+		pr_info("Unable to attach BlackFin UART Modem Status interrupt\n");
 	}
 
 	/* CTS RTS PINs are negative assertive. */
@@ -825,8 +825,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 		lcr = WLS(5);
 		break;
 	default:
-		printk(KERN_ERR "%s: word lengh not supported\n",
-			__func__);
+		pr_err("%s: word length not supported\n", __func__);
 	}
 
 	/* Anomaly notes:
@@ -834,8 +833,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	if (termios->c_cflag & CSTOPB) {
 		if (ANOMALY_05000231)
-			printk(KERN_WARNING "STOP bits other than 1 is not "
-				"supported in case of anomaly 05000231.\n");
+			pr_warning("STOP bits other than 1 is not supported in case of anomaly 05000231\n");
 		else
 			lcr |= STB;
 	}
@@ -1188,7 +1186,8 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
 
 		*baud = get_sclk() / (16*(dll | dlh << 8));
 	}
-	pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
+	pr_debug("%s:baud = %d, parity = %c, bits= %d\n",
+		 __func__, *baud, *parity, *bits);
 }
 
 static struct uart_driver bfin_serial_reg;
-- 
1.7.2.19.g9a302

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/