| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1282672290.24498.8.camel@ank32.eng.vmware.com>
Date: Tue, 24 Aug 2010 10:51:30 -0700
From: Alok Kataria <akataria@...are.com>
To: Borislav Petkov <bp@...64.org>
Cc: "H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...e.hu>,
Thomas Gleixner <tglx@...utronix.de>,
Borislav Petkov <bp@...en8.de>,
the arch/x86 maintainers <x86@...nel.org>,
Greg KH <gregkh@...e.de>, "greg@...ah.com" <greg@...ah.com>,
"ksrinivasan@...ell.com" <ksrinivasan@...ell.com>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH -v2] x86, tsc: Limit CPU frequency calibration on AMD
Hi Borislav,
Thanks for working on this change..
On Tue, 2010-08-24 at 08:53 -0700, Borislav Petkov wrote:
> 6b37f5a20c0e5c334c010a587058354215433e92 introduced the CPU frequency
> calibration code for AMD CPUs whose TSCs didn't increment with the
> core's P0 frequency. From F10h, revB onward, the TSC increment rate is
> denoted by MSRC001_0015[24] and when this bit is set (which is normally
> done by the BIOS,) the TSC increments with the P0 frequency so the
> calibration is not needed and booting can be a couple of mcecs faster on
> those machines.
>
> While at it, make the code work on 32-bit. In addition, use the 4th
> perfctr since using perfctr 0 might clash with perfctr-watchdog.c during
> LAPIC init. Finally, warn about wrongly calibrated value in the most
> seldom cases when the core TSC is not incrementing with P0 frequency.
>
> Signed-off-by: Borislav Petkov <borislav.petkov@....com>
> ---
>
> Here's the new version, had to change quite a lot and check all families
> first.
>
> @Alok, I think in your case you will want to do
>
> x86_cpuinit.calibrate_cpu = NULL;
> since this means no need to recalibrate.
Right, I will send that patch once this is committed.
Alok
>
> Sorry for the delay.
>
>
> arch/x86/include/asm/x86_init.h | 1 +
> arch/x86/kernel/cpu/amd.c | 74 +++++++++++++++++++++++++++++++++++++++
> arch/x86/kernel/tsc.c | 65 ++++------------------------------
> 3 files changed, 83 insertions(+), 57 deletions(-)
>
> diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
> index baa579c..c63ab76 100644
> --- a/arch/x86/include/asm/x86_init.h
> +++ b/arch/x86/include/asm/x86_init.h
> @@ -133,6 +133,7 @@ struct x86_init_ops {
> */
> struct x86_cpuinit_ops {
> void (*setup_percpu_clockev)(void);
> + unsigned long (*calibrate_cpu)(void);
> };
>
> /**
> diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
> index ba5f62f..236bcff 100644
> --- a/arch/x86/kernel/cpu/amd.c
> +++ b/arch/x86/kernel/cpu/amd.c
> @@ -6,6 +6,7 @@
> #include <asm/processor.h>
> #include <asm/apic.h>
> #include <asm/cpu.h>
> +#include <asm/nmi.h>
> #include <asm/pci-direct.h>
>
> #ifdef CONFIG_X86_64
> @@ -381,6 +382,62 @@ static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
> #endif
> }
>
> +/*
> + * This is used on systems with fixed rate TSCs to determine processor frequency
> + * when the TSC on those systems is not incrementing with the P0 frequency.
> + */
> +#define TICK_COUNT 100000000
> +unsigned long __cpuinit amd_calibrate_cpu(void)
> +{
> + u64 evntsel3 = 0, pmc3 = 0, pmcs = 0;
> + int tsc_start, tscs, i, no_ctr_free;
> + unsigned long flags;
> +
> + for (i = 3; i >= -1; i--)
> + if (avail_to_resrv_perfctr_nmi_bit(i))
> + break;
> +
> + no_ctr_free = (i == -1);
> + if (no_ctr_free) {
> + WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
> + "cpu_khz value may be incorrect.\n");
> + i = 3;
> + rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
> + wrmsrl(MSR_K7_EVNTSEL3, 0);
> + rdmsrl(MSR_K7_PERFCTR3, pmc3);
> + } else {
> + reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
> + reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
> + }
> +
> + /* start measuring cycles, incrementing from 0 */
> + local_irq_save(flags);
> + wrmsrl(MSR_K7_PERFCTR0 + i, 0);
> + wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
> + rdtscl(tsc_start);
> + do {
> + rdmsrl(MSR_K7_PERFCTR0 + i, pmcs);
> + tscs = get_cycles();
> + } while ((tscs - tsc_start) < TICK_COUNT);
> + local_irq_restore(flags);
> +
> + if (no_ctr_free) {
> + wrmsrl(MSR_K7_EVNTSEL3, 0);
> + wrmsrl(MSR_K7_PERFCTR3, pmc3);
> + wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
> + } else {
> + release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
> + release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
> + }
> +
> + pmcs *= tsc_khz;
> + tscs -= tsc_start;
> +
> + (void)do_div(pmcs, tscs);
> +
> + return pmcs;
> +}
> +
> static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
> {
> early_init_amd_mc(c);
> @@ -412,6 +469,23 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
> set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
> }
> #endif
> +
> + /* We need to do the following only once */
> + if (c != &boot_cpu_data)
> + return;
> +
> + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
> +
> + if (c->x86 > 0x10 ||
> + (c->x86 == 0x10 && c->x86_model >= 0x2)) {
> + u64 val;
> +
> + rdmsrl(MSR_K7_HWCR, val);
> + if (!(val & BIT(24)))
> + x86_cpuinit.calibrate_cpu = amd_calibrate_cpu;
> + } else
> + x86_cpuinit.calibrate_cpu = amd_calibrate_cpu;
> + }
> }
>
> static void __cpuinit init_amd(struct cpuinfo_x86 *c)
> diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> index ce8e502..6b4f22f 100644
> --- a/arch/x86/kernel/tsc.c
> +++ b/arch/x86/kernel/tsc.c
> @@ -854,60 +854,6 @@ static void __init init_tsc_clocksource(void)
> clocksource_register_khz(&clocksource_tsc, tsc_khz);
> }
>
> -#ifdef CONFIG_X86_64
> -/*
> - * calibrate_cpu is used on systems with fixed rate TSCs to determine
> - * processor frequency
> - */
> -#define TICK_COUNT 100000000
> -static unsigned long __init calibrate_cpu(void)
> -{
> - int tsc_start, tsc_now;
> - int i, no_ctr_free;
> - unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
> - unsigned long flags;
> -
> - for (i = 0; i < 4; i++)
> - if (avail_to_resrv_perfctr_nmi_bit(i))
> - break;
> - no_ctr_free = (i == 4);
> - if (no_ctr_free) {
> - WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
> - "cpu_khz value may be incorrect.\n");
> - i = 3;
> - rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
> - wrmsrl(MSR_K7_EVNTSEL3, 0);
> - rdmsrl(MSR_K7_PERFCTR3, pmc3);
> - } else {
> - reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
> - reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
> - }
> - local_irq_save(flags);
> - /* start measuring cycles, incrementing from 0 */
> - wrmsrl(MSR_K7_PERFCTR0 + i, 0);
> - wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
> - rdtscl(tsc_start);
> - do {
> - rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
> - tsc_now = get_cycles();
> - } while ((tsc_now - tsc_start) < TICK_COUNT);
> -
> - local_irq_restore(flags);
> - if (no_ctr_free) {
> - wrmsrl(MSR_K7_EVNTSEL3, 0);
> - wrmsrl(MSR_K7_PERFCTR3, pmc3);
> - wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
> - } else {
> - release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
> - release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
> - }
> -
> - return pmc_now * tsc_khz / (tsc_now - tsc_start);
> -}
> -#else
> -static inline unsigned long calibrate_cpu(void) { return cpu_khz; }
> -#endif
> -
> void __init tsc_init(void)
> {
> u64 lpj;
> @@ -926,9 +872,14 @@ void __init tsc_init(void)
> return;
> }
>
> - if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
> - (boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
> - cpu_khz = calibrate_cpu();
> + if (x86_cpuinit.calibrate_cpu) {
> + cpu_khz = x86_cpuinit.calibrate_cpu();
> + if (cpu_khz < tsc_khz) {
> + printk(KERN_WARNING "TSC possibly calibrated at non-P0 "
> + "core frequency, fall back to previous value.\n");
> + cpu_khz = tsc_khz;
> + }
> + }
>
> printk("Detected %lu.%03lu MHz processor.\n",
> (unsigned long)cpu_khz / 1000,
> --
> 1.7.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists