Message-Id: <20100825134224.5447.89998.sendpatchset@localhost6.localdomain6>
Date:	Wed, 25 Aug 2010 19:12:24 +0530
From:	Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
To:	Peter Zijlstra <peterz@...radead.org>, Ingo Molnar <mingo@...e.hu>
Cc:	Steven Rostedt <rostedt@...dmis.org>,
	Srikar Dronamraju <srikar@...ux.vnet.ibm.com>,
	Randy Dunlap <rdunlap@...otime.net>,
	Arnaldo Carvalho de Melo <acme@...radead.org>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	Christoph Hellwig <hch@...radead.org>,
	Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>,
	Oleg Nesterov <oleg@...hat.com>,
	Mark Wielaard <mjw@...hat.com>,
	Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Naren A Devaiah <naren.devaiah@...ibm.com>,
	Jim Keniston <jkenisto@...ux.vnet.ibm.com>,
	Frederic Weisbecker <fweisbec@...il.com>,
	"Frank Ch. Eigler" <fche@...hat.com>,
	Ananth N Mavinakayanahalli <ananth@...ibm.com>,
	LKML <linux-kernel@...r.kernel.org>,
	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
Subject: [PATCHv11 2.6.36-rc2-tip 5/15]  5: uprobes: Uprobes (un)registration and exception handling.


The uprobes infrastructure enables a user to dynamically establish
probepoints in user applications and collect information by executing
a handler function when a probepoint is hit.

The user specifies the virtual address and the pid of the process of
interest along with the action to be performed.  Uprobes uses the
execution out of line strategy and follows lazy slot allocation. I.e,
on the first probe hit for that process, a new vma (to hold the probed
instructions for execution out of line) is allocated.  Once allocated,
this vma remains for the life of the process, and is reused as needed
for subsequent probes.  A slot in the vma is allocated for a
probepoint when it is first hit.

A slot is marked for reuse only when the probe gets unregistered and
there are no threads in the vicinity.

In a multithreaded process, a probepoint once registered is active for
all threads of a process. If a thread specific action for a probepoint
is required then the handler should be implemented to do the same.

If a breakpoint already exists at a particular address (irrespective
of who inserted the breakpoint including uprobes), uprobes will refuse
to register any more probes at that address.

You need to follow this up with the uprobes patch for your
architecture.

For more information: please refer to Documentation/uprobes.txt

TODO:
1. Allow multiple probes at a probepoint.
2. Booster probes.
3. Allow probes to be inherited across fork.
4. probing function returns.

Signed-off-by: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@...ibm.com>
---

Changelog from V5:
   - Merged user_bkpt and user_bkpt_xol layers into uprobes.

Changelog from V2:
   - Introduce TIF_UPROBE flag.
   - uprobes hooks now in fork/exec/exit paths instead of tracehooks.
   - uprobe_process is now part of the mm struct and is shared between
     processes that share the mm.
   - per thread information is now allocated on the fly.
     * Hence allocation and freeing of this information is lockless.
   - find_probept() takes the spinlock; unlike previously when it was
     expected that the spinlock was taken before calling it.
   - For now run the handler in task context. The reasons for this
     change being.
     * utask (per task meta data structure is now allocated on the
       fly. Hence first request on the thread and first request for
       the breakpoint have to be anyway allocated in task context.
     * Measurements showed task based handler had negligible
       overhead over interrupt based handlers.
     * Feedback from Oleg and few others.
     * Feedback at LFCS.
     * Simplicity  atleast till uprobes stabilizes.
       (However we introduce interrupt based handlers at a later time.)

Changelog from v1:
	- If fixup might sleep; then do the post singlestep
	   processing in task context.

 arch/Kconfig             |    1 
 fs/exec.c                |    4 
 include/linux/mm_types.h |    4 
 include/linux/sched.h    |    3 
 include/linux/uprobes.h  |  143 ++++++++++
 kernel/fork.c            |   21 +
 kernel/uprobes.c         |  653 ++++++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 826 insertions(+), 3 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 87bd26b..c8c8e3f 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -49,6 +49,7 @@ config OPTPROBES
 
 config UPROBES
 	bool "User-space probes (EXPERIMENTAL)"
+	default n
 	depends on ARCH_SUPPORTS_UPROBES
 	depends on MMU
 	help
diff --git a/fs/exec.c b/fs/exec.c
index 2d94552..d7e64d0 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1053,6 +1053,10 @@ void setup_new_exec(struct linux_binprm * bprm)
 			
 	flush_signal_handlers(current, 0);
 	flush_old_files(current->files);
+#ifdef CONFIG_UPROBES
+	if (unlikely(current->utask))
+		uprobe_free_utask(current);
+#endif
 }
 EXPORT_SYMBOL(setup_new_exec);
 
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index cb57d65..8f79e51 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -12,6 +12,7 @@
 #include <linux/completion.h>
 #include <linux/cpumask.h>
 #include <linux/page-debug-flags.h>
+#include <linux/uprobes.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
 
@@ -310,6 +311,9 @@ struct mm_struct {
 #ifdef CONFIG_MMU_NOTIFIER
 	struct mmu_notifier_mm *mmu_notifier_mm;
 #endif
+#ifdef CONFIG_UPROBES
+	struct uprobe_process *uproc;	/* per mm uprobes info */
+#endif
 };
 
 /* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index e18473f..e237ba2 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1496,6 +1496,9 @@ struct task_struct {
 		unsigned long memsw_bytes; /* uncharged mem+swap usage */
 	} memcg_batch;
 #endif
+#ifdef CONFIG_UPROBES
+	struct uprobe_task *utask;
+#endif
 };
 
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index 84a078c..a85cd36 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -23,6 +23,14 @@
  *	Jim Keniston
  */
 
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/rcupdate.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/spinlock_types.h>
+#include <asm/atomic.h>
+
 #ifdef CONFIG_ARCH_SUPPORTS_UPROBES
 #include <asm/uprobes.h>
 #else
@@ -159,4 +167,139 @@ extern int post_xol(struct task_struct *tsk,
 
 extern struct user_bkpt_arch_info user_bkpt_arch_info;
 
+struct task_struct;
+struct pid;
+struct pt_regs;
+
+/* This is what the user supplies us. */
+struct uprobe {
+	/*
+	 * The pid of the probed process.  Currently, this can be the
+	 * thread ID (task->pid) of any active thread in the process.
+	 */
+	pid_t pid;
+
+	/* Location of the probepoint */
+	unsigned long vaddr;
+
+	/* Handler to run when the probepoint is hit */
+	void (*handler)(struct uprobe*, struct pt_regs*);
+};
+
+/*
+ * uprobe_process -- not a user-visible struct.
+ * A uprobe_process represents a probed process.  A process can have
+ * multiple probepoints (each represented by a uprobe_probept) and
+ * one or more threads (each represented by a uprobe_task).
+ *
+ * All processes/threads that share a mm share the same uprobe_process.
+ */
+struct uprobe_process {
+	/*
+	 * mutex locked for any change to the uprobe_process's
+	 * graph (including uprobe_probept, taking a slot in xol_area) --
+	 * e.g., due to probe [un]registration or special events like exit.
+	 */
+	struct mutex mutex;
+
+	/* Table of uprobe_probepts registered for this process */
+	struct list_head uprobe_list;
+
+	atomic_t refcount;
+
+	/* lock held while traversing/modifying uprobe_list and n_ppts */
+	spinlock_t pptlist_lock;	/* protects uprobe_list */
+
+	/* number of probept allocated for this process */
+	int n_ppts;
+
+	/*
+	 * Manages slots for instruction-copies to be single-stepped
+	 * out of line.
+	 */
+	void *xol_area;
+};
+
+/*
+ * uprobe_probept -- not a user-visible struct.
+ * A uprobe_probept represents a probepoint.
+ * Guarded by uproc->lock.
+ */
+struct uprobe_probept {
+	/* breakpoint/XOL details */
+	struct user_bkpt user_bkpt;
+
+	/*
+	 * ppt goes in the uprobe_process->uprobe_table when registered --
+	 * even before the breakpoint has been inserted.
+	 */
+	struct list_head ut_node;
+
+	atomic_t refcount;
+
+	/* The parent uprobe_process */
+	struct uprobe_process *uproc;
+
+	struct uprobe *uprobe;
+};
+
+enum uprobe_task_state {
+	UTASK_RUNNING,
+	UTASK_BP_HIT,
+	UTASK_SSTEP
+};
+
+/*
+ * uprobe_utask -- not a user-visible struct.
+ * Corresponds to a thread in a probed process.
+ * Guarded by uproc->mutex.
+ */
+struct uprobe_task {
+	struct user_bkpt_task_arch_info arch_info;
+
+	enum uprobe_task_state state;
+
+	struct uprobe_probept *active_ppt;
+};
+
+#ifdef CONFIG_UPROBES
+extern int uprobes_exception_notify(struct notifier_block *self,
+				unsigned long val, void *data);
+extern int uprobe_bkpt_notifier(struct pt_regs *regs);
+extern int uprobe_post_notifier(struct pt_regs *regs);
+extern void uprobe_notify_resume(struct pt_regs *regs);
+extern void arch_uprobe_enable_sstep(struct pt_regs *regs);
+extern void arch_uprobe_disable_sstep(struct pt_regs *regs);
+extern int register_uprobe(struct uprobe *u);
+extern void unregister_uprobe(struct uprobe *u);
+extern void uprobe_free_utask(struct task_struct *tsk);
+extern void uprobe_handle_fork(struct task_struct *child);
+extern void uprobe_put_uprocess(struct mm_struct *mm);
+#else	/* CONFIG_UPROBES */
+
+/*
+ * Only register_uprobe() and unregister_uprobe() are part of
+ * the client API.
+ */
+static inline int register_uprobe(struct uprobe *u)
+{
+	return -ENOSYS;
+}
+static inline void unregister_uprobe(struct uprobe *u)
+{
+}
+static inline void uprobe_free_utask(void)
+{
+}
+static inline void uprobe_handle_fork(struct task_struct *child)
+{
+}
+static inline void uprobe_notify_resume(struct pt_regs *regs)
+{
+}
+static inline void uprobe_put_uprocess(struct mm_struct *mm)
+{
+}
+#endif	/* CONFIG_UPROBES */
 #endif	/* _LINUX_UPROBES_H */
+
diff --git a/kernel/fork.c b/kernel/fork.c
index b7e9d60..d78cf5d 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -187,6 +187,11 @@ void __put_task_struct(struct task_struct *tsk)
 	delayacct_tsk_free(tsk);
 	put_signal_struct(tsk->signal);
 
+#ifdef CONFIG_UPROBES
+	if (unlikely(tsk->utask))
+		uprobe_free_utask(tsk);
+#endif
+
 	if (!profile_handoff_task(tsk))
 		free_task(tsk);
 }
@@ -525,6 +530,10 @@ void __mmdrop(struct mm_struct *mm)
 	mm_free_pgd(mm);
 	destroy_context(mm);
 	mmu_notifier_mm_destroy(mm);
+#ifdef CONFIG_UPROBES
+	if (unlikely(mm->uproc))
+		uprobe_put_uprocess(mm);
+#endif
 	free_mm(mm);
 }
 EXPORT_SYMBOL_GPL(__mmdrop);
@@ -683,6 +692,9 @@ struct mm_struct *dup_mm(struct task_struct *tsk)
 	if (mm->binfmt && !try_module_get(mm->binfmt->module))
 		goto free_pt;
 
+#ifdef CONFIG_UPROBES
+	mm->uproc = NULL;
+#endif
 	return mm;
 
 free_pt:
@@ -1190,6 +1202,9 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	INIT_LIST_HEAD(&p->pi_state_list);
 	p->pi_state_cache = NULL;
 #endif
+#ifdef CONFIG_UPROBES
+	p->utask = NULL;
+#endif
 	/*
 	 * sigaltstack should be cleared when sharing the same VM
 	 */
@@ -1288,6 +1303,12 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	proc_fork_connector(p);
 	cgroup_post_fork(p);
 	perf_event_fork(p);
+#ifdef CONFIG_UPROBES
+	if ((current->mm) && !(clone_flags & CLONE_VM)) {
+		if (unlikely(current->mm->uproc))
+			uprobe_handle_fork(p);
+	}
+#endif
 	return p;
 
 bad_fork_free_pid:
diff --git a/kernel/uprobes.c b/kernel/uprobes.c
index 230adf3..38c7abb 100644
--- a/kernel/uprobes.c
+++ b/kernel/uprobes.c
@@ -21,6 +21,7 @@
  *	Jim Keniston
  */
 #include <linux/kernel.h>
+#include <linux/types.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -36,6 +37,9 @@
 #include <linux/file.h>
 #include <linux/pid.h>
 #include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/kdebug.h>
+
 
 struct user_bkpt_arch_info *arch = &user_bkpt_arch_info;
 
@@ -345,7 +349,7 @@ static int __insert_bkpt(struct task_struct *tsk,
  *	@__insert_bkpt(). @user_bkpt->xol_vaddr must be the
  *	address of an XOL instruction slot that is allocated to this
  *	probepoint at least until after the completion of
- *	@uprobes_post_sstep(), and populated with the contents of
+ *	@post_sstep(), and populated with the contents of
  *	@user_bkpt->insn.
  *	@tskinfo: points to a @user_bkpt_task_arch_info object for @tsk.
  *	@regs: reflects the saved user state of @tsk.  pre_sstep()
@@ -356,7 +360,7 @@ static int __insert_bkpt(struct task_struct *tsk,
  *
  * The client must ensure that the contents of @user_bkpt are not
  * changed during the single-step operation -- i.e., between when
- * @uprobes_pre_sstep() is called and when @uprobes_post_sstep() returns.
+ * @pre_sstep() is called and when @post_sstep() returns.
  */
 static int pre_sstep(struct task_struct *tsk, struct user_bkpt *user_bkpt,
 		struct user_bkpt_task_arch_info *tskinfo, struct pt_regs *regs)
@@ -610,7 +614,7 @@ static unsigned long xol_take_insn_slot(struct uprobes_xol_area *area)
 
 /*
  * xol_get_insn_slot - If user_bkpt  was not allocated a slot, then
- * allocate a slot. If uprobes_insert_bkpt is already called, (i.e
+ * allocate a slot. If insert_bkpt is already called, (i.e
  * user_bkpt.vaddr != 0) then copy the instruction into the slot.
  * @user_bkpt: probepoint information
  * @xol_area refers the unique per process uprobes_xol_area for
@@ -741,6 +745,642 @@ validate_end:
 }
 /* end of slot allocation for XOL */
 
+
+struct notifier_block uprobes_exception_nb = {
+	.notifier_call = uprobes_exception_notify,
+	.priority = 0x7ffffff0,
+};
+
+typedef void (*uprobe_handler_t)(struct uprobe*, struct pt_regs*);
+
+/* Guards lookup, creation, and deletion of uproc. */
+static DEFINE_MUTEX(uprobe_mutex);
+
+static inline void get_probept(struct uprobe_probept *ppt)
+{
+	atomic_inc(&ppt->refcount);
+}
+
+/*
+ * Creates a uprobe_probept and connects it to uprobe and uproc.
+ * Runs with uproc->mutex locked.
+ */
+static struct uprobe_probept *add_probept(struct uprobe *u,
+					struct uprobe_process *uproc)
+{
+	struct uprobe_probept *ppt;
+
+	ppt = kzalloc(sizeof *ppt, GFP_USER);
+	if (unlikely(ppt == NULL))
+		return ERR_PTR(-ENOMEM);
+
+	ppt->user_bkpt.vaddr = u->vaddr;
+	ppt->uprobe = u;
+	ppt->user_bkpt.xol_vaddr = 0;
+
+	ppt->uproc = uproc;
+	INIT_LIST_HEAD(&ppt->ut_node);
+	spin_lock(&uproc->pptlist_lock);
+	list_add(&ppt->ut_node, &uproc->uprobe_list);
+	uproc->n_ppts++;
+	spin_unlock(&uproc->pptlist_lock);
+	atomic_set(&ppt->refcount, 1);
+	return ppt;
+}
+
+static void put_probept(struct uprobe_probept *ppt)
+{
+	struct uprobe_process *uproc;
+
+	uproc = ppt->uproc;
+	if (atomic_dec_and_lock(&ppt->refcount, &uproc->pptlist_lock)) {
+		list_del(&ppt->ut_node);
+		uproc->n_ppts--;
+		xol_free_insn_slot(ppt->user_bkpt.xol_vaddr, uproc->xol_area);
+		spin_unlock(&uproc->pptlist_lock);
+		kfree(ppt);
+	}
+}
+
+/*
+ * In the given uproc's table of probepoints, find the one with the
+ * specified virtual address.
+ * Called with uproc->pptlist_lock acquired.
+ */
+static struct uprobe_probept *find_probept(struct uprobe_process *uproc,
+							unsigned long vaddr)
+{
+	struct uprobe_probept *ppt;
+
+	spin_lock(&uproc->pptlist_lock);
+	list_for_each_entry(ppt, &uproc->uprobe_list, ut_node) {
+		if (ppt->user_bkpt.vaddr == vaddr) {
+			spin_unlock(&uproc->pptlist_lock);
+			return ppt;
+		}
+	}
+	spin_unlock(&uproc->pptlist_lock);
+	return NULL;
+}
+
+/*
+ * Save a copy of the original instruction (so it can be single-stepped
+ * out of line), insert the breakpoint instruction.
+ * Runs with uproc->mutex locked.
+ */
+static int insert_bkpt(struct uprobe_probept *ppt, struct task_struct *tsk)
+{
+	int result;
+
+	if (tsk)
+		result = __insert_bkpt(tsk, &ppt->user_bkpt);
+	else
+		/* No surviving tasks associated with ppt->uproc */
+		result = -ESRCH;
+	return result;
+}
+
+/* Runs with uproc->mutex locked. */
+static void remove_bkpt(struct uprobe_probept *ppt, struct task_struct *tsk)
+{
+	if (!tsk)
+		return;
+
+	if (__remove_bkpt(tsk, &ppt->user_bkpt) != 0) {
+		printk(KERN_ERR "Error removing uprobe at pid %d vaddr %#lx:"
+			" can't restore original instruction\n",
+			tsk->tgid, ppt->user_bkpt.vaddr);
+		/*
+		 * This shouldn't happen, since we were previously able
+		 * to write the breakpoint at that address.  There's not
+		 * much we can do besides let the process die with a
+		 * SIGTRAP the next time the breakpoint is hit.
+		 */
+	}
+}
+
+/* Runs with the uprobe_mutex held. */
+static struct uprobe_process *find_uprocess(struct pid *tg_leader)
+{
+	struct uprobe_process *uproc = NULL;
+	struct task_struct *tsk;
+
+	rcu_read_lock();
+	tsk = pid_task(tg_leader, PIDTYPE_PID);
+	if (!tsk || !tsk->mm)
+		goto end;
+
+	uproc = tsk->mm->uproc;
+	if (uproc)
+		atomic_inc(&uproc->refcount);
+
+end:
+	rcu_read_unlock();
+	return uproc;
+}
+
+/*
+ * uproc's process is exiting or exec-ing.
+ * The last thread of uproc's process is about to die, and its
+ * mm_struct is about to be released.
+ * Hence do the cleanup without holding locks.
+ *
+ * Called with no locks held.
+ */
+static int free_uprocess(struct uprobe_process *uproc)
+{
+	struct uprobe_probept *ppt, *pnode;
+
+	list_for_each_entry_safe(ppt, pnode, &uproc->uprobe_list, ut_node) {
+		put_probept(ppt);
+	}
+	if (uproc->xol_area)
+		xol_free_area(uproc->xol_area);
+
+	kfree(uproc);
+	return 0;
+}
+
+/* Called with no locks held */
+static void put_uprocess(struct uprobe_process *uproc)
+{
+	if (atomic_dec_and_test(&uproc->refcount))
+		free_uprocess(uproc);
+}
+
+/*
+ * Called with no locks held.
+ * Called in context of a exiting or a exec-ing thread.
+ */
+void uprobe_free_utask(struct task_struct *tsk)
+{
+	if (!tsk->utask)
+		return;
+
+	if (tsk->utask->active_ppt)
+		put_probept(tsk->utask->active_ppt);
+	kfree(tsk->utask);
+	tsk->utask = NULL;
+}
+
+/*
+ * Callback from mmput() when mm->users count reduces to zero.
+ */
+void uprobe_put_uprocess(struct mm_struct *mm)
+{
+	put_uprocess(mm->uproc);
+	mm->uproc = NULL;
+}
+
+/*
+ * Allocate a uprobe_task object for the task.
+ * Called with t "got" and uprobe_mutex locked.
+ * Called when the thread hits a breakpoint for the first time.
+ *
+ * Returns:
+ * - pointer to new uprobe_task on success
+ * - negative errno otherwise
+ */
+static struct uprobe_task *add_utask(struct uprobe_process *uproc)
+{
+	struct uprobe_task *utask;
+
+	utask = kzalloc(sizeof *utask, GFP_KERNEL);
+	if (unlikely(utask == NULL))
+		return ERR_PTR(-ENOMEM);
+
+	utask->active_ppt = NULL;
+	current->utask = utask;
+	atomic_inc(&uproc->refcount);
+
+	return utask;
+}
+
+/* Runs with uprobe_mutex held; */
+static struct uprobe_process *create_uprocess(struct pid *tg_leader)
+{
+	struct uprobe_process *uproc = ERR_PTR(-ENOMEM);
+	struct task_struct *tsk;
+	struct mm_struct *mm = NULL;
+
+	tsk = get_pid_task(tg_leader, PIDTYPE_PID);
+	if (tsk)
+		mm = get_task_mm(tsk);
+	if (!mm) {
+		if (tsk)
+			put_task_struct(tsk);
+		return ERR_PTR(-ESRCH);
+	}
+
+	uproc = kzalloc(sizeof *uproc, GFP_KERNEL);
+	if (unlikely(uproc == NULL)) {
+		uproc =  ERR_PTR(-ENOMEM);
+		goto end;
+	}
+
+	/* Initialize fields */
+	mutex_init(&uproc->mutex);
+	spin_lock_init(&uproc->pptlist_lock);
+	atomic_set(&uproc->refcount, 1);
+	INIT_LIST_HEAD(&uproc->uprobe_list);
+
+	BUG_ON(mm->uproc);
+	mm->uproc = uproc;
+
+	/*
+	 * Incrementing the refcount saves us from calling find_uprocess
+	 * in register_uprobe path.
+	 */
+	atomic_inc(&uproc->refcount);
+
+end:
+	put_task_struct(tsk);
+	mmput(mm);
+	return uproc;
+}
+
+/*
+ * Given a numeric thread ID, return a ref-counted struct pid for the
+ * task-group-leader thread.
+ */
+static struct pid *get_tg_leader(pid_t p)
+{
+	struct pid *pid = NULL;
+
+	rcu_read_lock();
+	pid = find_vpid(p);
+	if (pid) {
+		struct task_struct *t = pid_task(pid, PIDTYPE_PID);
+
+		if (!t)
+			pid = NULL;
+		else
+			pid = get_pid(task_tgid(t));
+	}
+	rcu_read_unlock();
+	return pid;
+}
+
+/* See Documentation/uprobes.txt. */
+int register_uprobe(struct uprobe *u)
+{
+	struct uprobe_process *uproc;
+	struct uprobe_probept *ppt;
+	struct pid *p;
+	int ret = 0;
+
+	if (!u || !u->handler)
+		return -EINVAL;
+
+	p = get_tg_leader(u->pid);
+	if (!p)
+		return -ESRCH;
+
+	/* Get the uprobe_process for this pid, or make a new one. */
+	mutex_lock(&uprobe_mutex);
+	uproc = find_uprocess(p);
+
+	if (!uproc) {
+		uproc = create_uprocess(p);
+		if (IS_ERR(uproc)) {
+			ret = (int) PTR_ERR(uproc);
+			mutex_unlock(&uprobe_mutex);
+			goto fail_tsk;
+		}
+	}
+	mutex_unlock(&uprobe_mutex);
+	mutex_lock(&uproc->mutex);
+
+	if (uproc->n_ppts >= MAX_UPROBES_XOL_SLOTS)
+		goto fail_uproc;
+
+	ret = xol_validate_vaddr(p, u->vaddr, uproc->xol_area);
+	if (ret < 0)
+		goto fail_uproc;
+
+	/* See if we already have a probepoint at the vaddr. */
+	ppt = find_probept(uproc, u->vaddr);
+	if (ppt) {
+		/*
+		 * A uprobe already exists at that address.
+		 */
+		ret = -EALREADY;
+		goto fail_uproc;
+	} else {
+		struct task_struct *t;
+
+		ppt = add_probept(u, uproc);
+		if (IS_ERR(ppt)) {
+			ret = (int) PTR_ERR(ppt);
+			goto fail_uproc;
+		}
+
+		t = get_pid_task(p, PIDTYPE_PID);
+		if (!t)
+			goto fail_uproc;
+
+		ret = insert_bkpt(ppt, t);
+		put_task_struct(t);
+		if (ret != 0)
+			goto fail_uproc;
+	}
+
+fail_uproc:
+	mutex_unlock(&uproc->mutex);
+	put_uprocess(uproc);
+
+fail_tsk:
+	put_pid(p);
+	return ret;
+}
+
+/* See Documentation/uprobes.txt. */
+void unregister_uprobe(struct uprobe *u)
+{
+	struct uprobe_process *uproc;
+	struct uprobe_probept *ppt;
+	struct task_struct *t;
+	struct pid *p;
+
+	if (!u)
+		return;
+	p = get_tg_leader(u->pid);
+	if (!p)
+		return;
+
+	/* Get the uprobe_process for this pid. */
+	mutex_lock(&uprobe_mutex);
+	uproc = find_uprocess(p);
+	mutex_unlock(&uprobe_mutex);
+	if (!uproc) {
+		put_pid(p);
+		return;
+	}
+
+	/*
+	 * Lock uproc before walking the graph, in case the process
+	 * we're probing is exiting.
+	 */
+	mutex_lock(&uproc->mutex);
+
+	ppt = find_probept(uproc, u->vaddr);
+	if (!ppt)
+		/*
+		 * This probe was never successfully registered, or
+		 * has already been unregistered.
+		 */
+		goto done;
+
+	if (ppt->uprobe != u)
+		/*
+		 * unregister request doesnt correspond to successful
+		 * register request.
+		 */
+		goto done;
+
+	t = get_pid_task(p, PIDTYPE_PID);
+	if (!t)
+		goto done;
+
+	remove_bkpt(ppt, t);
+	put_task_struct(t);
+
+	/*
+	 * Breakpoint is removed; however a thread could have hit the
+	 * same breakpoint and yet to find its corresponding probepoint.
+	 * Before we remove the probepoint, give the breakpointed thread a
+	 * chance to find the probepoint.
+	 */
+	mutex_unlock(&uproc->mutex);
+	synchronize_sched();
+	mutex_lock(&uproc->mutex);
+	put_probept(ppt);
+
+done:
+	mutex_unlock(&uproc->mutex);
+	put_uprocess(uproc);
+	put_pid(p);
+}
+
+/* Prepare to single-step ppt's probed instruction out of line. */
+static int pre_ssout(struct uprobe_probept *ppt, struct pt_regs *regs)
+{
+	struct uprobe_process *uproc = current->mm->uproc;
+
+	if (unlikely(!ppt->user_bkpt.xol_vaddr)) {
+		mutex_lock(&uproc->mutex);
+		if (unlikely(!uproc->xol_area))
+			uproc->xol_area = xol_alloc_area();
+		if (uproc->xol_area && !ppt->user_bkpt.xol_vaddr)
+			xol_get_insn_slot(&ppt->user_bkpt, uproc->xol_area);
+		if (unlikely(!ppt->user_bkpt.xol_vaddr))
+			goto fail;
+		mutex_unlock(&uproc->mutex);
+	}
+	pre_sstep(current, &ppt->user_bkpt,
+					&current->utask->arch_info, regs);
+	set_ip(regs, ppt->user_bkpt.xol_vaddr);
+	return 0;
+
+/*
+ * We failed to execute out of line.
+ * reset the instruction pointer and remove the breakpoint.
+ */
+fail:
+	remove_bkpt(ppt, current);
+	mutex_unlock(&uproc->mutex);
+	set_ip(regs, ppt->user_bkpt.vaddr);
+	put_probept(ppt);
+	return -1;
+}
+
+/* Prepare to continue execution after single-stepping out of line. */
+static int post_ssout(struct uprobe_probept *ppt, struct pt_regs *regs)
+{
+	return post_sstep(current, &ppt->user_bkpt,
+					&current->utask->arch_info, regs);
+}
+
+/*
+ * Verify from Instruction Pointer if singlestep has indeed occurred.
+ * If Singlestep has occurred, then do post singlestep fix-ups.
+ */
+static bool sstep_complete(struct pt_regs *regs,
+				struct uprobe_probept *ppt)
+{
+	unsigned long vaddr = instruction_pointer(regs);
+
+	/*
+	 * If we have executed out of line, Instruction pointer
+	 * cannot be same as virtual address of XOL slot.
+	 */
+	if (vaddr == ppt->user_bkpt.xol_vaddr)
+		return false;
+	post_ssout(ppt, regs);
+	return true;
+}
+
+/*
+ * Fork callback: The current task has spawned a process.
+ * NOTE: For now, we don't pass on uprobes from the parent to the
+ * child. We now do the necessary clearing of breakpoints in the
+ * child's address space.
+ * This function handles the case where vm is not shared between
+ * the parent and the child.
+ *
+ * TODO:
+ *	- Provide option for child to inherit uprobes.
+ */
+void uprobe_handle_fork(struct task_struct *child)
+{
+	struct uprobe_process *uproc;
+	struct uprobe_probept *ppt;
+	int ret;
+
+	uproc = current->mm->uproc;
+
+	/*
+	 * New process spawned by parent but not sharing the same mm.
+	 * Remove the probepoints in the child's text.
+	 *
+	 * We also hold the uproc->mutex for the parent - so no
+	 * new uprobes will be registered 'til we return.
+	 */
+	mutex_lock(&uproc->mutex);
+	list_for_each_entry(ppt, &uproc->uprobe_list, ut_node) {
+		ret = __remove_bkpt(child, &ppt->user_bkpt);
+		if (ret && ret != -EINVAL) {
+			/* Ratelimit this? */
+			printk(KERN_ERR "Pid %d forked %d; failed to"
+				" remove probepoint at %#lx in child\n",
+				current->pid, child->pid,
+				ppt->user_bkpt.vaddr);
+		}
+	}
+	mutex_unlock(&uproc->mutex);
+}
+
+/*
+ * uprobe_notify_resume gets called in task context just before returning
+ * to userspace.
+ *
+ *  If its the first time the probepoint is hit, slot gets allocated here.
+ *  If its the first time the thread hit a breakpoint, utask gets
+ *  allocated here.
+ */
+void uprobe_notify_resume(struct pt_regs *regs)
+{
+	struct uprobe_process *uproc;
+	struct uprobe_probept *ppt;
+	struct uprobe_task *utask;
+	struct uprobe *u;
+	unsigned long probept;
+
+	utask = current->utask;
+	uproc = current->mm->uproc;
+	if (unlikely(!utask)) {
+		utask = add_utask(uproc);
+
+		/* Failed to allocate utask for the current task. */
+		BUG_ON(!utask);
+		probept = uprobes_get_bkpt_addr(regs);
+		ppt = find_probept(uproc, probept);
+
+		/*
+		 * The probept was refcounted in uprobe_bkpt_notifier;
+		 * Hence it would be mysterious to miss ppt now
+		 */
+		WARN_ON(!ppt);
+		utask->active_ppt = ppt;
+		utask->state = UTASK_BP_HIT;
+	} else
+		ppt = utask->active_ppt;
+
+	if (utask->state == UTASK_BP_HIT) {
+		utask->state = UTASK_SSTEP;
+		u = ppt->uprobe;
+		if (u && u->handler)
+			u->handler(u, regs);
+
+		if (!pre_ssout(ppt, regs))
+			arch_uprobe_enable_sstep(regs);
+	} else if (utask->state == UTASK_SSTEP) {
+		if (sstep_complete(regs, ppt)) {
+			put_probept(ppt);
+			utask->active_ppt = NULL;
+			utask->state = UTASK_RUNNING;
+			arch_uprobe_disable_sstep(regs);
+		}
+	}
+}
+
+/*
+ * uprobe_bkpt_notifier gets called from interrupt context
+ * it gets a reference to the ppt and sets TIF_UPROBE flag,
+ */
+int uprobe_bkpt_notifier(struct pt_regs *regs)
+{
+	struct uprobe_process *uproc;
+	struct uprobe_probept *ppt;
+	struct uprobe_task *utask;
+	unsigned long probept;
+
+	if (!current->mm || !current->mm->uproc)
+		/* task is currently not uprobed */
+		return 0;
+
+	uproc = current->mm->uproc;
+	utask = current->utask;
+	probept = uprobes_get_bkpt_addr(regs);
+	ppt = find_probept(uproc, probept);
+	if (!ppt)
+		return 0;
+	get_probept(ppt);
+	if (utask) {
+		utask->active_ppt = ppt;
+		utask->state = UTASK_BP_HIT;
+	}
+#ifdef CONFIG_ARCH_SUPPORTS_UPROBES
+	set_thread_flag(TIF_UPROBE);
+#endif
+	return 1;
+}
+
+/*
+ * uprobe_post_notifier gets called in interrupt context.
+ * It completes the single step operation.
+ */
+int uprobe_post_notifier(struct pt_regs *regs)
+{
+	struct uprobe_probept *ppt;
+	struct uprobe_task *utask;
+
+	if (!current->mm || !current->mm->uproc || !current->utask)
+		/* task is currently not uprobed */
+		return 0;
+
+	utask = current->utask;
+
+	ppt = utask->active_ppt;
+	if (!ppt)
+		return 0;
+
+	if (uprobes_resume_can_sleep(&ppt->user_bkpt)) {
+#ifdef CONFIG_ARCH_SUPPORTS_UPROBES
+		set_thread_flag(TIF_UPROBE);
+#endif
+		return 1;
+	}
+	if (sstep_complete(regs, ppt)) {
+		put_probept(ppt);
+		arch_uprobe_disable_sstep(regs);
+		utask->active_ppt = NULL;
+		utask->state = UTASK_RUNNING;
+		return 1;
+	}
+	return 0;
+}
+
 static int __init init_uprobes(void)
 {
 	int result = 0;
@@ -752,7 +1392,14 @@ static int __init init_uprobes(void)
 	if (arch->ip_advancement_by_bkpt_insn > arch->max_insn_bytes)
 		result = bad_arch_param("ip_advancement_by_bkpt_insn",
 				arch->ip_advancement_by_bkpt_insn);
+
+	register_die_notifier(&uprobes_exception_nb);
 	return result;
 }
 
+static void __exit exit_uprobes(void)
+{
+}
+
 module_init(init_uprobes);
+module_exit(exit_uprobes);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists