[ 0.000000] Linux version 2.6.36-rc2+ (aschuring@neminis) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) #18 PREEMPT Thu Aug 26 20:33:58 CEST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0D0000000 mask FFC000000 write-combining [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 14000-19000 [ 0.000000] RAMDISK: 37cac000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 00100000 - 00443f87 [ 0.000000] Move RAMDISK from 0000000037cac000 - 0000000037feff86 to 00100000 - 00443f86 [ 0.000000] ACPI: RSDP 000fab70 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 5fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACP 5fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B) [ 0.000000] ACPI: DSDT 5fff0120 032D2 (v01 SiS 746 00000100 INTL 02002024) [ 0.000000] ACPI: FACS 5fff8000 00040 [ 0.000000] ACPI: APIC 5fff00c0 0005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 647MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005fff0 [ 0.000000] On node 0 totalpages: 393087 [ 0.000000] free_area_init_node: node 0, pgdat c142c274, node_mem_map c14f5200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1296 pages used for memmap [ 0.000000] HighMem zone: 164578 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390015 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.36-rc2+ root=UUID=712de211-5c25-4f9f-b83e-f65b60bede92 ro selinux=1 enforcing=0 quiet [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (32 early reservations) [ 0.000000] #1 [0001000000 - 00014ecd1c] TEXT DATA BSS [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #3 [00014ed000 - 00014f30c4] BRK [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE [ 0.000000] #6 [0000100000 - 0000444000] NEW RAMDISK [ 0.000000] #7 [00014f4000 - 00014f5000] BOOTMEM [ 0.000000] #8 [00014f5000 - 00020f5000] BOOTMEM [ 0.000000] #9 [00014ecd40 - 00014ecd44] BOOTMEM [ 0.000000] #10 [00014ecd80 - 00014ece00] BOOTMEM [ 0.000000] #11 [00014ece00 - 00014ece54] BOOTMEM [ 0.000000] #12 [00020f5000 - 00020f7000] BOOTMEM [ 0.000000] #13 [00014ece80 - 00014ecec0] BOOTMEM [ 0.000000] #14 [00020f7000 - 00020f9000] BOOTMEM [ 0.000000] #15 [00014ecec0 - 00014ecee7] BOOTMEM [ 0.000000] #16 [00014f3100 - 00014f3234] BOOTMEM [ 0.000000] #17 [00014ecf00 - 00014ecf40] BOOTMEM [ 0.000000] #18 [00014ecf40 - 00014ecf80] BOOTMEM [ 0.000000] #19 [00014ecf80 - 00014ecfc0] BOOTMEM [ 0.000000] #20 [00014ecfc0 - 00014ed000] BOOTMEM [ 0.000000] #21 [00014f3240 - 00014f3280] BOOTMEM [ 0.000000] #22 [00014f3280 - 00014f32c0] BOOTMEM [ 0.000000] #23 [00014f32c0 - 00014f3300] BOOTMEM [ 0.000000] #24 [00014f3300 - 00014f3340] BOOTMEM [ 0.000000] #25 [00014f3340 - 00014f3380] BOOTMEM [ 0.000000] #26 [00014f3380 - 00014f33c0] BOOTMEM [ 0.000000] #27 [00014f33c0 - 00014f342e] BOOTMEM [ 0.000000] #28 [00014f3440 - 00014f34ae] BOOTMEM [ 0.000000] #29 [00020f9000 - 00020fd000] BOOTMEM [ 0.000000] #30 [00020fd000 - 000217d000] BOOTMEM [ 0.000000] #31 [000217d000 - 00021bd000] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0005fff0) [ 0.000000] Memory: 1550820k/1572800k available (2781k kernel code, 21528k reserved, 1520k data, 296k init, 663496k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1434000 - 0xc147e000 ( 296 kB) [ 0.000000] .data : 0xc12b77e2 - 0xc1433978 (1520 kB) [ 0.000000] .text : 0xc1000000 - 0xc12b77e2 (2781 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=c13f2000 soft=c13f3000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1836.917 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3673.83 BogoMIPS (lpj=7347668) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004044] Security Framework initialized [ 0.004055] SELinux: Initializing. [ 0.004083] SELinux: Starting in permissive mode [ 0.004093] Mount-cache hash table entries: 512 [ 0.004352] mce: CPU supports 4 MCE banks [ 0.004380] Performance Events: AMD PMU driver. [ 0.004391] ... version: 0 [ 0.004393] ... bit width: 48 [ 0.004396] ... generic registers: 4 [ 0.004398] ... value mask: 0000ffffffffffff [ 0.004401] ... max period: 00007fffffffffff [ 0.004404] ... fixed-purpose events: 0 [ 0.004406] ... event mask: 000000000000000f [ 0.004411] CPU: mobile AMD Athlon(tm) XP-M (LV) 2200+ stepping 01 [ 0.008148] ACPI: Core revision 20100702 [ 0.014615] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.014919] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056000] NET: Registered protocol family 16 [ 0.056000] ACPI: bus type pci registered [ 0.056000] PCI: Using configuration type 1 for base access [ 0.057530] bio: create slab at 0 [ 0.058353] ACPI: EC: Look up EC in DSDT [ 0.062969] ACPI: Interpreter enabled [ 0.062975] ACPI: (supports S0 S1 S5) [ 0.062995] ACPI: Using IOAPIC for interrupt routing [ 0.068390] ACPI: Power Resource [URP1] (off) [ 0.068414] ACPI: Power Resource [URP2] (off) [ 0.068436] ACPI: Power Resource [FDDP] (off) [ 0.068457] ACPI: Power Resource [LPTP] (off) [ 0.068692] ACPI: No dock devices found. [ 0.068701] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.069191] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.069456] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.069462] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.069466] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.069471] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored) [ 0.069475] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xffdfffff] (ignored) [ 0.069480] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored) [ 0.069512] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd3ffffff] [ 0.069679] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.069741] pci 0000:00:02.1: reg 20: [io 0x0c00-0x0c1f] [ 0.069828] pci 0000:00:02.5: reg 20: [io 0xff00-0xff0f] [ 0.069877] pci 0000:00:03.0: reg 10: [mem 0xcfffd000-0xcfffdfff] [ 0.069951] pci 0000:00:03.1: reg 10: [mem 0xcfffe000-0xcfffefff] [ 0.070030] pci 0000:00:03.2: reg 10: [mem 0xcffff000-0xcfffffff] [ 0.070094] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.070100] pci 0000:00:03.2: PME# disabled [ 0.070140] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff] [ 0.070152] pci 0000:00:04.0: reg 14: [mem 0xcfffc000-0xcfffcfff] [ 0.070194] pci 0000:00:04.0: reg 30: [mem 0xcffc0000-0xcffdffff pref] [ 0.070214] pci 0000:00:04.0: supports D1 D2 [ 0.070217] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070223] pci 0000:00:04.0: PME# disabled [ 0.070264] pci 0000:00:0c.0: reg 10: [io 0xd800-0xd81f] [ 0.070276] pci 0000:00:0c.0: reg 14: [io 0xd400-0xd40f] [ 0.070287] pci 0000:00:0c.0: reg 18: [io 0xd000-0xd00f] [ 0.070298] pci 0000:00:0c.0: reg 1c: [io 0xcc00-0xcc3f] [ 0.070340] pci 0000:00:0c.0: supports D2 [ 0.070412] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref] [ 0.070422] pci 0000:01:00.0: reg 14: [io 0xa800-0xa8ff] [ 0.070432] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff] [ 0.070459] pci 0000:01:00.0: reg 30: [mem 0xcfec0000-0xcfedffff pref] [ 0.070480] pci 0000:01:00.0: supports D1 D2 [ 0.070511] pci 0000:01:00.1: reg 10: [mem 0xb8000000-0xbfffffff pref] [ 0.070521] pci 0000:01:00.1: reg 14: [mem 0xcfee0000-0xcfeeffff] [ 0.070566] pci 0000:01:00.1: supports D1 D2 [ 0.070607] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.070614] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.070620] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xcfefffff] [ 0.070626] pci 0000:00:01.0: bridge window [mem 0xafa00000-0xcfbfffff pref] [ 0.070637] pci_bus 0000:00: on NUMA node 0 [ 0.070643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.070912] Unable to assume PCIe control: Disabling ASPM [ 0.078903] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.079021] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.079123] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.079225] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.079325] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.079429] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.079532] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.079632] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.079904] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.079909] vgaarb: loaded [ 0.080161] SCSI subsystem initialized [ 0.080204] libata version 3.00 loaded. [ 0.080488] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.080542] PCI: Using ACPI for IRQ routing [ 0.080548] PCI: pci_cache_line_size set to 32 bytes [ 0.080604] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.080609] reserve RAM buffer: 000000005fff0000 - 000000005fffffff [ 0.080849] Switching to clocksource tsc [ 0.082995] pnp: PnP ACPI init [ 0.083032] ACPI: bus type pnp registered [ 0.085003] pnp: PnP ACPI: found 9 devices [ 0.085008] ACPI: ACPI bus type pnp unregistered [ 0.085032] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.085037] system 00:01: [io 0x0295-0x0296] has been reserved [ 0.085042] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.085046] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.085050] system 00:01: [io 0x0c00-0x0c1f] has been reserved [ 0.085057] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.124286] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.124293] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.124302] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xcfefffff] [ 0.124309] pci 0000:00:01.0: bridge window [mem 0xafa00000-0xcfbfffff pref] [ 0.124329] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.124333] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.124338] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.124342] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff] [ 0.124346] pci_bus 0000:01: resource 2 [mem 0xafa00000-0xcfbfffff pref] [ 0.124415] NET: Registered protocol family 2 [ 0.124503] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.125135] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.127757] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.128382] TCP: Hash tables configured (established 131072 bind 65536) [ 0.128387] TCP reno registered [ 0.128393] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.128417] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.128555] NET: Registered protocol family 1 [ 0.179184] pci 0000:01:00.0: Boot video device [ 0.179193] PCI: CLS 32 bytes, default 32 [ 0.179322] Unpacking initramfs... [ 0.298304] Freeing initrd memory: 3344k freed [ 0.305688] audit: initializing netlink socket (disabled) [ 0.305719] type=2000 audit(1282937096.300:1): initialized [ 0.305974] highmem bounce pool size: 64 pages [ 0.309662] VFS: Disk quotas dquot_6.5.2 [ 0.309769] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.310089] msgmni has been set to 1739 [ 0.310243] SELinux: Registering netfilter hooks [ 0.310450] alg: No test for stdrng (krng) [ 0.310616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.310622] io scheduler noop registered [ 0.310638] io scheduler cfq registered (default) [ 0.311502] Linux agpgart interface v0.103 [ 0.311530] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746] [ 0.316743] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [ 0.316940] [drm] Initialized drm 1.1.0 20060810 [ 0.317005] [drm] radeon defaulting to kernel modesetting. [ 0.317008] [drm] radeon kernel modesetting enabled. [ 0.317088] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.323109] [drm] initializing kernel modesetting (RV350 0x1002:0x4153). [ 0.323208] [drm] register mmio base: 0xCFEF0000 [ 0.323212] [drm] register mmio size: 65536 [ 0.323489] agpgart-sis 0000:00:00.0: AGP 3.0 bridge [ 0.323513] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode [ 0.323518] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover [ 0.339195] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode [ 0.339207] radeon 0000:01:00.0: GTT: 64M 0xD0000000 - 0xD3FFFFFF [ 0.339213] [drm] Generation 2 PCI interface, using max accessible memory [ 0.339219] radeon 0000:01:00.0: VRAM: 128M 0xC0000000 - 0xC7FFFFFF (128M used) [ 0.339279] [drm] radeon: irq initialized. [ 0.339446] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.339453] [drm] RAM width 64bits DDR [ 0.339591] [TTM] Zone kernel: Available graphics memory: 445334 kiB. [ 0.339595] [TTM] Zone highmem: Available graphics memory: 777082 kiB. [ 0.339599] [TTM] Initializing pool allocator. [ 0.339654] [drm] radeon: 128M of VRAM memory ready [ 0.339658] [drm] radeon: 64M of GTT memory ready. [ 0.339727] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 0.339890] [drm] Loading R300 Microcode [ 0.341560] [drm] radeon: ring at 0x00000000D0000000 [ 0.341588] [drm] ring test succeeded in 1 usecs [ 0.342100] [drm] radeon: ib pool ready. [ 0.342243] [drm] ib test succeeded in 0 usecs [ 0.342889] [drm] Default TV standard: PAL [ 0.342892] [drm] 27.000000000 MHz TV ref clk [ 0.342898] [drm] DFP table revision: 3 [ 0.343016] [drm] Default TV standard: PAL [ 0.343019] [drm] 27.000000000 MHz TV ref clk [ 0.343136] [drm] Radeon Display Connectors [ 0.343139] [drm] Connector 0: [ 0.343142] [drm] VGA [ 0.343145] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 0.343148] [drm] Encoders: [ 0.343151] [drm] CRT1: INTERNAL_DAC1 [ 0.343154] [drm] Connector 1: [ 0.343156] [drm] DVI-I [ 0.343176] [drm] HPD1 [ 0.343180] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 0.343182] [drm] Encoders: [ 0.343185] [drm] CRT2: INTERNAL_DAC2 [ 0.343187] [drm] DFP1: INTERNAL_TMDS1 [ 0.343190] [drm] Connector 2: [ 0.343192] [drm] S-video [ 0.343194] [drm] Encoders: [ 0.343196] [drm] TV1: INTERNAL_DAC2 [ 0.705495] [drm] fb mappable at 0xC0040000 [ 0.705498] [drm] vram apper at 0xC0000000 [ 0.705501] [drm] size 8294400 [ 0.705503] [drm] fb depth is 24 [ 0.705506] [drm] pitch is 7680 [ 0.857853] Console: switching to colour frame buffer device 160x64 [ 0.881546] fb0: radeondrmfb frame buffer device [ 0.881549] drm: registered panic notifier [ 0.881561] [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0 [ 0.881853] pata_sis 0000:00:02.5: version 0.5.2 [ 0.882054] scsi0 : pata_sis [ 0.882235] scsi1 : pata_sis [ 0.883341] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.883346] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 0.883591] sis900.c: v1.08.10 Apr. 2 2006 [ 0.883622] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.884509] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 0.893297] 0000:00:04.0: Using transceiver found at address 1 as default [ 0.894213] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:0b:6a:56:4f:c2 [ 0.894334] console [netcon0] enabled [ 0.894338] netconsole: network logging started [ 0.894569] PNP: No PS/2 controller found. Probing ports directly. [ 0.927020] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.927315] mice: PS/2 mouse device common for all mice [ 0.927390] cpuidle: using governor ladder [ 0.927395] cpuidle: using governor menu [ 0.927548] ICE1712 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.011326] Consumer PCM code does not work well at the moment --jk [ 1.021052] ALSA device list: [ 1.021056] #0: TerraTec EWS88MT at 0xd800, irq 16 [ 1.021595] TCP cubic registered [ 1.021603] NET: Registered protocol family 17 [ 1.021620] Registering the dns_resolver key type [ 1.021669] Using IPI Shortcut mode [ 1.079468] ata1.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33 [ 1.079572] ata1.01: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/100 [ 1.079577] ata1.01: 312581808 sectors, multi 16: LBA48 [ 1.095476] ata1.00: configured for UDMA/33 [ 1.124260] ata1.01: configured for UDMA/100 [ 1.125739] scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 [ 1.126207] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5 [ 1.126528] sd 0:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.126604] sd 0:0:1:0: [sda] Write Protect is off [ 1.126610] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.126643] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.136597] sda: sda1 sda2 sda3 [ 1.137159] sd 0:0:1:0: [sda] Attached SCSI disk [ 1.296219] ata2.00: ATAPI: LITE-ON LTR-40125S, ZS0N, max UDMA/33 [ 1.296342] ata2.01: ATA-7: ST3200826A, 3.03, max UDMA/100 [ 1.296347] ata2.01: 390721968 sectors, multi 16: LBA48 [ 1.312211] ata2.00: configured for UDMA/33 [ 1.328269] ata2.01: configured for UDMA/100 [ 1.340825] scsi 1:0:0:0: CD-ROM LITE-ON LTR-40125S ZS0N PQ: 0 ANSI: 5 [ 1.341269] scsi 1:0:1:0: Direct-Access ATA ST3200826A 3.03 PQ: 0 ANSI: 5 [ 1.341563] sd 1:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.341637] sd 1:0:1:0: [sdb] Write Protect is off [ 1.341643] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.341675] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.358717] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.359329] sd 1:0:1:0: [sdb] Attached SCSI disk [ 1.359358] Freeing unused kernel memory: 296k freed [ 1.359879] Write protecting the kernel text: 2784k [ 1.359910] Write protecting the kernel read-only data: 1248k [ 1.468363] udevd (505): /proc/505/oom_adj is deprecated, please use /proc/505/oom_score_adj instead. [ 1.765155] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.765165] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.765341] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.774435] Floppy drive(s): fd0 is 1.44M [ 1.792071] FDC 0 is a post-1991 82077 [ 1.847455] sr1: scsi3-mmc drive: 25x/48x writer cd/rw xa/form2 cdda tray [ 1.847693] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 1.853569] usbcore: registered new interface driver usbfs [ 1.853951] usbcore: registered new interface driver hub [ 1.863247] usbcore: registered new device driver usb [ 1.872071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.872158] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.872194] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 1.872208] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 1.872302] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000 [ 1.885987] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 1.886081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.886086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.886090] usb usb1: Product: EHCI Host Controller [ 1.886094] usb usb1: Manufacturer: Linux 2.6.36-rc2+ ehci_hcd [ 1.886097] usb usb1: SerialNumber: 0000:00:03.2 [ 1.886528] hub 1-0:1.0: USB hub found [ 1.886540] hub 1-0:1.0: 6 ports detected [ 1.895339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.895413] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.895463] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 1.895476] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.895522] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000 [ 1.950061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.950070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.950074] usb usb2: Product: OHCI Host Controller [ 1.950077] usb usb2: Manufacturer: Linux 2.6.36-rc2+ ohci_hcd [ 1.950081] usb usb2: SerialNumber: 0000:00:03.0 [ 1.950527] hub 2-0:1.0: USB hub found [ 1.950541] hub 2-0:1.0: 3 ports detected [ 1.950648] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.950705] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.950716] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.950761] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000 [ 2.006100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.006108] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.006112] usb usb3: Product: OHCI Host Controller [ 2.006115] usb usb3: Manufacturer: Linux 2.6.36-rc2+ ohci_hcd [ 2.006119] usb usb3: SerialNumber: 0000:00:03.1 [ 2.007166] hub 3-0:1.0: USB hub found [ 2.007185] hub 3-0:1.0: 3 ports detected [ 2.196053] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.329304] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 2.329312] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.329317] usb 1-2: Product: USB2.0 Hub [ 2.330725] hub 1-2:1.0: USB hub found [ 2.331053] hub 1-2:1.0: 4 ports detected [ 2.444064] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.486650] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.580918] usb 1-4: New USB device found, idVendor=059f, idProduct=100d [ 2.580926] usb 1-4: New USB device strings: Mfr=10, Product=11, SerialNumber=5 [ 2.580930] usb 1-4: Product: Rugged USB [ 2.580933] usb 1-4: Manufacturer: LaCie [ 2.580936] usb 1-4: SerialNumber: 97FBFFFFFFFF [ 2.652291] usb 1-2.1: new low speed USB device using ehci_hcd and address 4 [ 2.751032] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c00b [ 2.751039] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.751044] usb 1-2.1: Product: USB Mouse [ 2.751047] usb 1-2.1: Manufacturer: Logitech [ 2.824295] usb 1-2.4: new low speed USB device using ehci_hcd and address 5 [ 2.931156] usb 1-2.4: New USB device found, idVendor=04d9, idProduct=2013 [ 2.931164] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.931169] usb 1-2.4: Product: USB Keyboard [ 2.931172] usb 1-2.4: Manufacturer: [ 4.052341] udev: starting version 160 [ 5.817203] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.817221] ACPI: Power Button [PWRB] [ 5.817486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.817493] ACPI: Power Button [PWRF] [ 5.827335] rtc_cmos 00:03: RTC can wake from S4 [ 5.827556] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.827589] rtc0: alarms up to one year, 114 bytes nvram [ 5.861730] Initializing USB Mass Storage driver... [ 5.861920] scsi2 : usb-storage 1-4:1.0 [ 5.862197] usbcore: registered new interface driver usb-storage [ 5.862201] USB Mass Storage support registered. [ 5.995664] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 5.995676] ACPI: resource 0000:00:02.1 [io 0x0c00-0x0c1f] conflicts with ACPI region SMRG [??? 0x00000c00-0x00000c1f flags 0x47] [ 5.995680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.996744] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 6.006903] ACPI: acpi_idle registered with cpuidle [ 6.069171] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 6.093189] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.333600] usbcore: registered new interface driver hiddev [ 6.340258] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:03.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input3 [ 6.340948] generic-usb 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.2-2.1/input0 [ 6.349572] input: USB Keyboard as /devices/pci0000:00/0000:00:03.2/usb1/1-2/1-2.4/1-2.4:1.0/input/input4 [ 6.349738] generic-usb 0003:04D9:2013.0002: input,hidraw1: USB HID v1.00 Keyboard [ USB Keyboard] on usb-0000:00:03.2-2.4/input0 [ 6.363286] input: USB Keyboard as /devices/pci0000:00/0000:00:03.2/usb1/1-2/1-2.4/1-2.4:1.1/input/input5 [ 6.363453] generic-usb 0003:04D9:2013.0003: input,hidraw2: USB HID v1.00 Device [ USB Keyboard] on usb-0000:00:03.2-2.4/input1 [ 6.363492] usbcore: registered new interface driver usbhid [ 6.363496] usbhid: USB HID core driver [ 6.416424] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.860833] scsi 2:0:0:0: Direct-Access TOSHIBA MK1637GSX PQ: 0 ANSI: 2 CCS [ 6.863063] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 6.863558] sd 2:0:0:0: [sdc] Write Protect is off [ 6.863565] sd 2:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 6.863570] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 6.865167] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 6.865814] sdc: sdc1 [ 6.867813] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 6.868047] sd 2:0:0:0: [sdc] Attached SCSI disk [ 6.994902] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k [ 7.001797] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 7.411173] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 7.504729] device-mapper: uevent: version 1.0.3 [ 7.505954] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 7.639751] w83627hf: Found W83697HF chip at 0x290 [ 7.668175] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising. [ 7.668206] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec [ 7.668325] w83627hf/thf/hg WDT: initialized. timeout=60 sec (nowayout=0) [ 8.951536] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.978192] XFS mounting filesystem sdb3 [ 9.055290] Ending clean XFS mount for filesystem: sdb3 [ 9.170997] XFS mounting filesystem sdb4 [ 9.270112] Ending clean XFS mount for filesystem: sdb4 [ 9.379242] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 9.404707] XFS mounting filesystem sda3 [ 9.469067] Ending clean XFS mount for filesystem: sda3 [ 11.940854] eth0: Media Link On 100mbps full-duplex [ 12.437070] ------------[ cut here ]------------ [ 12.437090] WARNING: at kernel/softirq.c:143 _local_bh_enable_ip+0x2f/0x7e() [ 12.437094] Hardware name: [ 12.437097] Modules linked in: xfs exportfs w83627hf_wdt w83627hf hwmon_vid dm_crypt dm_mod usbhid 8250_pnp 8250 hid processor pcspkr i2c_sis96x serial_core evdev usb_storage rtc_cmos button rtc_core rtc_lib ext4 jbd2 crc16 ohci_hcd ehci_hcd usbcore thermal thermal_sys floppy nls_base sr_mod cdrom [last unloaded: scsi_wait_scan] [ 12.437148] Pid: 0, comm: swapper Not tainted 2.6.36-rc2+ #18 [ 12.437152] Call Trace: [ 12.437167] [] ? warn_slowpath_common+0x6a/0x7b [ 12.437172] [] ? _local_bh_enable_ip+0x2f/0x7e [ 12.437178] [] ? warn_slowpath_null+0xd/0x10 [ 12.437183] [] ? _local_bh_enable_ip+0x2f/0x7e [ 12.437191] [] ? netpoll_rx+0x71/0x77 [ 12.437195] [] ? netif_rx+0xe/0xf7 [ 12.437204] [] ? sis900_interrupt+0x1c7/0x4ab [ 12.437212] [] ? handle_IRQ_event+0x54/0x102 [ 12.437218] [] ? handle_fasteoi_irq+0x8c/0xdf [ 12.437223] [] ? handle_fasteoi_irq+0x0/0xdf [ 12.437226] [] ? do_IRQ+0x2b/0x7f [ 12.437237] [] ? common_interrupt+0x29/0x30 [ 12.437246] [] ? default_idle+0x39/0x4c [ 12.437250] [] ? cpu_idle+0x35/0xad [ 12.437258] [] ? start_kernel+0x274/0x277 [ 12.437262] ---[ end trace d2278ae4badf238c ]--- [ 13.567728] NET: Registered protocol family 10 [ 13.568383] lo: Disabled Privacy Extensions [ 13.892366] RPC: Registered udp transport module. [ 13.892374] RPC: Registered tcp transport module. [ 13.892377] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.004918] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.575303] fuse init (API version 7.15) [ 31.440083] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID [ 31.572083] [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID [ 31.816083] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID [ 32.200019] i2c i2c-0: readbytes: ack/nak timeout [ 32.200095] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID [ 32.308084] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID