| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1283115995-4734-3-git-send-email-arnd@arndb.de>
Date: Sun, 29 Aug 2010 23:06:32 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Greg KH <gregkh@...e.de>
Cc: linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>
Subject: [PATCH 2/5] tty/vt: move files to drivers/tty/vt/
The virtual terminal is a very special tty driver, so
it deserves its own directory.
Signed-off-by: Armd Bergmann <arnd@...db.de>
---
drivers/char/Kconfig | 84 +-------------------------
drivers/char/Makefile | 33 ----------
drivers/tty/Makefile | 1 +
drivers/tty/vt/Kconfig | 84 ++++++++++++++++++++++++++
drivers/tty/vt/Makefile | 37 +++++++++++
drivers/{char => tty/vt}/consolemap.c | 0
drivers/{char => tty/vt}/cp437.uni | 0
drivers/{char => tty/vt}/defkeymap.c_shipped | 0
drivers/{char => tty/vt}/defkeymap.map | 0
drivers/{char => tty/vt}/keyboard.c | 0
drivers/{char => tty/vt}/selection.c | 0
drivers/{char => tty/vt}/vc_screen.c | 0
drivers/{char => tty/vt}/vt.c | 0
drivers/{char => tty/vt}/vt_ioctl.c | 0
14 files changed, 123 insertions(+), 116 deletions(-)
create mode 100644 drivers/tty/vt/Kconfig
create mode 100644 drivers/tty/vt/Makefile
rename drivers/{char => tty/vt}/consolemap.c (100%)
rename drivers/{char => tty/vt}/cp437.uni (100%)
rename drivers/{char => tty/vt}/defkeymap.c_shipped (100%)
rename drivers/{char => tty/vt}/defkeymap.map (100%)
rename drivers/{char => tty/vt}/keyboard.c (100%)
rename drivers/{char => tty/vt}/selection.c (100%)
rename drivers/{char => tty/vt}/vc_screen.c (100%)
rename drivers/{char => tty/vt}/vt.c (100%)
rename drivers/{char => tty/vt}/vt_ioctl.c (100%)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 7beee39..52fa94d 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -4,89 +4,7 @@
menu "Character devices"
-config VT
- bool "Virtual terminal" if EMBEDDED
- depends on !S390
- select INPUT
- default y
- ---help---
- If you say Y here, you will get support for terminal devices with
- display and keyboard devices. These are called "virtual" because you
- can run several virtual terminals (also called virtual consoles) on
- one physical terminal. This is rather useful, for example one
- virtual terminal can collect system messages and warnings, another
- one can be used for a text-mode user session, and a third could run
- an X session, all in parallel. Switching between virtual terminals
- is done with certain key combinations, usually Alt-<function key>.
-
- The setterm command ("man setterm") can be used to change the
- properties (such as colors or beeping) of a virtual terminal. The
- man page console_codes(4) ("man console_codes") contains the special
- character sequences that can be used to change those properties
- directly. The fonts used on virtual terminals can be changed with
- the setfont ("man setfont") command and the key bindings are defined
- with the loadkeys ("man loadkeys") command.
-
- You need at least one virtual terminal device in order to make use
- of your keyboard and monitor. Therefore, only people configuring an
- embedded system would want to say N here in order to save some
- memory; the only way to log into such a system is then via a serial
- or network connection.
-
- If unsure, say Y, or else you won't be able to do much with your new
- shiny Linux system :-)
-
-config CONSOLE_TRANSLATIONS
- depends on VT
- default y
- bool "Enable character translations in console" if EMBEDDED
- ---help---
- This enables support for font mapping and Unicode translation
- on virtual consoles.
-
-config VT_CONSOLE
- bool "Support for console on virtual terminal" if EMBEDDED
- depends on VT
- default y
- ---help---
- The system console is the device which receives all kernel messages
- and warnings and which allows logins in single user mode. If you
- answer Y here, a virtual terminal (the device used to interact with
- a physical terminal) can be used as system console. This is the most
- common mode of operations, so you should say Y here unless you want
- the kernel messages be output only to a serial port (in which case
- you should say Y to "Console on serial port", below).
-
- If you do say Y here, by default the currently visible virtual
- terminal (/dev/tty0) will be used as system console. You can change
- that with a kernel command line option such as "console=tty3" which
- would use the third virtual terminal as system console. (Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel at boot time.)
-
- If unsure, say Y.
-
-config HW_CONSOLE
- bool
- depends on VT && !S390 && !UML
- default y
-
-config VT_HW_CONSOLE_BINDING
- bool "Support for binding and unbinding console drivers"
- depends on HW_CONSOLE
- default n
- ---help---
- The virtual terminal is the device that interacts with the physical
- terminal through console drivers. On these systems, at least one
- console driver is loaded. In other configurations, additional console
- drivers may be enabled, such as the framebuffer console. If more than
- 1 console driver is enabled, setting this to 'y' will allow you to
- select the console driver that will serve as the backend for the
- virtual terminals.
-
- See <file:Documentation/console/console.txt> for more
- information. For framebuffer console users, please refer to
- <file:Documentation/fb/fbcon.txt>.
+source "drivers/tty/vt/Kconfig"
config DEVKMEM
bool "/dev/kmem virtual device support"
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index b7e6058..f507df7 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -2,18 +2,10 @@
# Makefile for the kernel character device drivers.
#
-#
-# This file contains the font map for the default (hardware) font
-#
-FONTMAPFILE = cp437.uni
-
obj-y += mem.o random.o
obj-y += misc.o
-obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
-obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
-obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
@@ -106,28 +98,3 @@ obj-$(CONFIG_RAMOOPS) += ramoops.o
obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
-
-# Files generated that shall be removed upon make clean
-clean-files := consolemap_deftbl.c defkeymap.c
-
-quiet_cmd_conmk = CONMK $@
- cmd_conmk = scripts/conmakehash $< > $@
-
-$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
- $(call cmd,conmk)
-
-$(obj)/defkeymap.o: $(obj)/defkeymap.c
-
-# Uncomment if you're changing the keymap and have an appropriate
-# loadkeys version for the map. By default, we'll use the shipped
-# versions.
-# GENERATE_KEYMAP := 1
-
-ifdef GENERATE_KEYMAP
-
-$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
- loadkeys --mktable $< > $@...p
- sed -e 's/^static *//' $@...p > $@
- rm $@...p
-
-endif
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 562a96f..5845211 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -12,6 +12,7 @@ obj-y += tty_mutex.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
+obj-$(CONFIG_VT) += vt/
obj-$(CONFIG_AUDIT) += tty_audit.o
obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
diff --git a/drivers/tty/vt/Kconfig b/drivers/tty/vt/Kconfig
new file mode 100644
index 0000000..7373eeb
--- /dev/null
+++ b/drivers/tty/vt/Kconfig
@@ -0,0 +1,84 @@
+config VT
+ bool "Virtual terminal" if EMBEDDED
+ depends on !S390
+ select INPUT
+ default y
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+ depends on VT
+ default y
+ bool "Enable character translations in console" if EMBEDDED
+ ---help---
+ This enables support for font mapping and Unicode translation
+ on virtual consoles.
+
+config VT_CONSOLE
+ bool "Support for console on virtual terminal" if EMBEDDED
+ depends on VT
+ default y
+ ---help---
+ The system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode. If you
+ answer Y here, a virtual terminal (the device used to interact with
+ a physical terminal) can be used as system console. This is the most
+ common mode of operations, so you should say Y here unless you want
+ the kernel messages be output only to a serial port (in which case
+ you should say Y to "Console on serial port", below).
+
+ If you do say Y here, by default the currently visible virtual
+ terminal (/dev/tty0) will be used as system console. You can change
+ that with a kernel command line option such as "console=tty3" which
+ would use the third virtual terminal as system console. (Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel at boot time.)
+
+ If unsure, say Y.
+
+config HW_CONSOLE
+ bool
+ depends on VT && !S390 && !UML
+ default y
+
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
diff --git a/drivers/tty/vt/Makefile b/drivers/tty/vt/Makefile
new file mode 100644
index 0000000..4d6714f
--- /dev/null
+++ b/drivers/tty/vt/Makefile
@@ -0,0 +1,37 @@
+#
+# Makefile for virtual terminal device driver
+#
+
+#
+# This file contains the font map for the default (hardware) font
+#
+FONTMAPFILE = cp437.uni
+
+obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
+obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
+
+# Files generated that shall be removed upon make clean
+clean-files := consolemap_deftbl.c defkeymap.c
+
+quiet_cmd_conmk = CONMK $@
+ cmd_conmk = scripts/conmakehash $< > $@
+
+$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
+ $(call cmd,conmk)
+
+$(obj)/defkeymap.o: $(obj)/defkeymap.c
+
+# Uncomment if you're changing the keymap and have an appropriate
+# loadkeys version for the map. By default, we'll use the shipped
+# versions.
+# GENERATE_KEYMAP := 1
+
+ifdef GENERATE_KEYMAP
+
+$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
+ loadkeys --mktable $< > $@...p
+ sed -e 's/^static *//' $@...p > $@
+ rm $@...p
+
+endif
diff --git a/drivers/char/consolemap.c b/drivers/tty/vt/consolemap.c
similarity index 100%
rename from drivers/char/consolemap.c
rename to drivers/tty/vt/consolemap.c
diff --git a/drivers/char/cp437.uni b/drivers/tty/vt/cp437.uni
similarity index 100%
rename from drivers/char/cp437.uni
rename to drivers/tty/vt/cp437.uni
diff --git a/drivers/char/defkeymap.c_shipped b/drivers/tty/vt/defkeymap.c_shipped
similarity index 100%
rename from drivers/char/defkeymap.c_shipped
rename to drivers/tty/vt/defkeymap.c_shipped
diff --git a/drivers/char/defkeymap.map b/drivers/tty/vt/defkeymap.map
similarity index 100%
rename from drivers/char/defkeymap.map
rename to drivers/tty/vt/defkeymap.map
diff --git a/drivers/char/keyboard.c b/drivers/tty/vt/keyboard.c
similarity index 100%
rename from drivers/char/keyboard.c
rename to drivers/tty/vt/keyboard.c
diff --git a/drivers/char/selection.c b/drivers/tty/vt/selection.c
similarity index 100%
rename from drivers/char/selection.c
rename to drivers/tty/vt/selection.c
diff --git a/drivers/char/vc_screen.c b/drivers/tty/vt/vc_screen.c
similarity index 100%
rename from drivers/char/vc_screen.c
rename to drivers/tty/vt/vc_screen.c
diff --git a/drivers/char/vt.c b/drivers/tty/vt/vt.c
similarity index 100%
rename from drivers/char/vt.c
rename to drivers/tty/vt/vt.c
diff --git a/drivers/char/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
similarity index 100%
rename from drivers/char/vt_ioctl.c
rename to drivers/tty/vt/vt_ioctl.c
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists