| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1283115995-4734-6-git-send-email-arnd@arndb.de>
Date: Sun, 29 Aug 2010 23:06:35 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Greg KH <gregkh@...e.de>
Cc: linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>
Subject: [PATCH 5/5] tty: rearrange Kconfig structure
This makes the layout of Kconfig reflect the
new directory structure for the tty device
drivers.
Most significantly, the tty drivers now have
their own menu below the device drivers menu,
instead of being mixed with the other character
device drivers.
All serial drivers that are still registering
to the tty layer instead of to the serial or
hvc drivers are now in the 'nonstandard serial
port' category.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/cris/Kconfig | 2 ++
drivers/Kconfig | 2 ++
drivers/char/Kconfig | 10 ----------
drivers/tty/Kconfig | 16 ++++++++++++++++
drivers/tty/hw/Kconfig | 36 ++++++++++++++++++------------------
5 files changed, 38 insertions(+), 28 deletions(-)
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index aefe3b1..71fa087 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -682,6 +682,8 @@ source "drivers/rtc/Kconfig"
#
source "drivers/input/Kconfig"
+source "drivers/tty/Kconfig"
+
source "drivers/char/Kconfig"
source "fs/Kconfig"
diff --git a/drivers/Kconfig b/drivers/Kconfig
index a2b902f..f37a125 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -44,6 +44,8 @@ source "drivers/telephony/Kconfig"
source "drivers/input/Kconfig"
+source "drivers/tty/Kconfig"
+
source "drivers/char/Kconfig"
source "drivers/i2c/Kconfig"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 834fb9e..31a0370 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -4,8 +4,6 @@
menu "Character devices"
-source "drivers/tty/vt/Kconfig"
-
config DEVKMEM
bool "/dev/kmem virtual device support"
default y
@@ -15,8 +13,6 @@ config DEVKMEM
kind of kernel debugging operations.
When in doubt, say "N".
-source "drivers/tty/hw/Kconfig"
-
config SGI_SNSC
bool "SGI Altix system controller communication support"
depends on (IA64_SGI_SN2 || IA64_GENERIC)
@@ -39,10 +35,6 @@ config SGI_MBCS
If you have an SGI Altix with an attached SABrick
say Y or M here, otherwise say N.
-source "drivers/serial/Kconfig"
-
-source "drivers/tty/Kconfig"
-
config BRIQ_PANEL
tristate 'Total Impact briQ front panel driver'
depends on PPC_CHRP
@@ -147,8 +139,6 @@ config PPDEV
If unsure, say N.
-source "drivers/tty/hvc/Kconfig"
-
config IBM_BSR
tristate "IBM POWER Barrier Synchronization Register support"
depends on PPC_PSERIES
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index a245618..2bb7262 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -1,3 +1,7 @@
+menu "TTY device drivers"
+
+source "drivers/tty/vt/Kconfig"
+
config UNIX98_PTYS
bool "Unix98 PTY support" if EMBEDDED
default y
@@ -63,6 +67,14 @@ config LEGACY_PTY_COUNT
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
+source "drivers/tty/hvc/Kconfig"
+
+source "drivers/serial/Kconfig"
+
+source "drivers/tty/hw/Kconfig"
+
+menu "Non-standard TTY line disciplines"
+
config R3964
tristate "Siemens R3964 line discipline"
---help---
@@ -94,3 +106,7 @@ config N_GSM
help
This line discipline provides support for the GSM MUX protocol and
presents the mux as a set of 61 individual tty devices.
+
+endmenu
+
+endmenu
diff --git a/drivers/tty/hw/Kconfig b/drivers/tty/hw/Kconfig
index 4328aa4..cffb96b 100644
--- a/drivers/tty/hw/Kconfig
+++ b/drivers/tty/hw/Kconfig
@@ -1,17 +1,4 @@
-config BFIN_JTAG_COMM
- tristate "Blackfin JTAG Communication"
- depends on BLACKFIN
- help
- Add support for emulating a TTY device over the Blackfin JTAG.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
- bool "Console on Blackfin JTAG"
- depends on BFIN_JTAG_COMM=y
-
-config SERIAL_NONSTANDARD
+menuconfig SERIAL_NONSTANDARD
bool "Non-standard serial port support"
depends on HAS_IOMEM
---help---
@@ -28,6 +15,19 @@ config SERIAL_NONSTANDARD
Most people can say N here.
+config BFIN_JTAG_COMM
+ tristate "Blackfin JTAG Communication"
+ depends on BLACKFIN && SERIAL_NONSTANDARD
+ help
+ Add support for emulating a TTY device over the Blackfin JTAG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+ bool "Console on Blackfin JTAG"
+ depends on BFIN_JTAG_COMM=y
+
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -261,7 +261,7 @@ config ISTALLION
config NOZOMI
tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
- depends on PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL && SERIAL_NONSTANDARD
help
If you have a HSDPA driver Broadband Wireless Data Card -
Globe Trotter PCMCIA card, say Y here.
@@ -271,7 +271,7 @@ config NOZOMI
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ZORRO && BROKEN
+ depends on EXPERIMENTAL && ZORRO && BROKEN && SERIAL_NONSTANDARD
---help---
This option supports the 2232 7-port serial card shipped with the
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
@@ -287,7 +287,7 @@ config A2232
config SYNCLINK_CS
tristate "SyncLink PC Card support"
- depends on PCMCIA
+ depends on PCMCIA && SERIAL_NONSTANDARD
help
Enable support for the SyncLink PC Card serial adapter, running
asynchronous and HDLC communications up to 512Kbps. The port is
@@ -300,7 +300,7 @@ config SYNCLINK_CS
config IPWIRELESS
tristate "IPWireless 3G UMTS PCMCIA card support"
- depends on PCMCIA && NETDEVICES
+ depends on PCMCIA && NETDEVICES && SERIAL_NONSTANDARD
select PPP
help
This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists