Linux version 2.6.35-rc3+ (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #33238 PREEMPT Fri Sep 3 18:18:47 CEST 2010 CPU: vendor_id 'AuthenticAMD' unknown, using generic init. CPU: Your system may be unstable. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) bootconsole [earlyser0] enabled debug: ignoring loglevel setting. Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3fff0 max_arch_pfn = 0x100000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000003fff0000 (usable) modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) modified: 000000003fff3000 - 0000000040000000 (ACPI data) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 02800000 init_memory_mapping: 0000000000000000-000000003fff0000 0000000000 - 0000400000 page 4k 0000400000 - 003fc00000 page 2M 003fc00000 - 003fff0000 page 4k kernel direct mapping tables up to 3fff0000 @ 10000-15000 0MB HIGHMEM available. 1023MB LOWMEM available. mapped low ram: 0 - 3fff0000 low ram: 0 - 3fff0000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0003fff0 HighMem empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262015 free_area_init_node: node 0, pgdat 41fe5ac0, node_mem_map 4222a200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 2016 pages used for memmap Normal zone: 256016 pages, LIFO batch:31 Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Booting paravirtualized kernel on bare hardware Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3 sysrq: sysrq always enabled. PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (24 early reservations) #0 [0001000000 - 000221d318] TEXT DATA BSS #1 [000009f800 - 0000100000] BIOS reserved #2 [000221e000 - 0002228149] BRK #3 [0000010000 - 0000011000] PGTABLE #4 [0002229000 - 000222a000] BOOTMEM #5 [000222a000 - 0002a2a000] BOOTMEM #6 [000221d340 - 000221d344] BOOTMEM #7 [000221d380 - 000221d400] BOOTMEM #8 [000221d400 - 000221d460] BOOTMEM #9 [0002a2a000 - 0002a2c000] BOOTMEM #10 [000221d480 - 000221d57c] BOOTMEM #11 [000221d580 - 000221d5c0] BOOTMEM #12 [000221d5c0 - 000221d600] BOOTMEM #13 [000221d600 - 000221d640] BOOTMEM #14 [000221d640 - 000221d680] BOOTMEM #15 [000221d680 - 000221d6c0] BOOTMEM #16 [000221d6c0 - 000221d700] BOOTMEM #17 [000221d700 - 000221d740] BOOTMEM #18 [000221d740 - 000221d780] BOOTMEM #19 [000221d780 - 000221d835] BOOTMEM #20 [000221d840 - 000221d8f5] BOOTMEM #21 [0002a2c000 - 0002a30000] BOOTMEM #22 [0002a30000 - 0002ab0000] BOOTMEM #23 [0002ab0000 - 0002af0000] BOOTMEM Initializing HighMem for node 0 (00000000:00000000) Memory: 1020472k/1048512k available (12632k kernel code, 27588k reserved, 3768k data, 564k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0x807f0000 - 0xff7fe000 (2032 MB) lowmem : 0x40000000 - 0x7fff0000 (1023 MB) .init : 0x42005000 - 0x42092000 ( 564 kB) .data : 0x41c560c7 - 0x42004348 (3768 kB) .text : 0x41000000 - 0x41c560c7 (12632 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 CPU 0 irqstacks, hard=41f5f000 soft=41f61000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Fast TSC calibration using PIT Detected 2010.601 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.20 BogoMIPS (lpj=20106010) pid_max: default: 32768 minimum: 301 Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 512 mce: CPU supports 5 MCE banks MCE: unknown CPU type - not enabling MCE support. Performance Events: CPU: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 calling spawn_ksoftirqd+0x0/0x32 @ 1 initcall spawn_ksoftirqd+0x0/0x32 returned 0 after 0 usecs calling relay_init+0x0/0x7 @ 1 initcall relay_init+0x0/0x7 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x163 @ 1 initcall tracer_alloc_buffers+0x0/0x163 returned 0 after 0 usecs calling init_trace_printk+0x0/0x7 @ 1 initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs calling init_mmap_min_addr+0x0/0x11 @ 1 initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs calling net_ns_init+0x0/0xf3 @ 1 initcall net_ns_init+0x0/0xf3 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x11 @ 1 initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs calling reboot_init+0x0/0x11 @ 1 initcall reboot_init+0x0/0x11 returned 0 after 0 usecs calling sysctl_init+0x0/0x13 @ 1 initcall sysctl_init+0x0/0x13 returned 0 after 0 usecs calling ksysfs_init+0x0/0x74 @ 1 initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs calling async_init+0x0/0x5e @ 1 initcall async_init+0x0/0x5e returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0xf @ 1 initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs calling pm_init+0x0/0x2d @ 1 initcall pm_init+0x0/0x2d returned 0 after 0 usecs calling init_ftrace_syscalls+0x0/0x8c @ 1 initcall init_ftrace_syscalls+0x0/0x8c returned 0 after 9765 usecs calling init_hw_breakpoint+0x0/0x42 @ 1 initcall init_hw_breakpoint+0x0/0x42 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x14 @ 1 initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs calling filelock_init+0x0/0x30 @ 1 initcall filelock_init+0x0/0x30 returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x35 @ 1 initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x11 @ 1 initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x11 @ 1 initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs calling debugfs_init+0x0/0x4a @ 1 initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs calling securityfs_init+0x0/0x41 @ 1 initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs calling random32_init+0x0/0x85 @ 1 initcall random32_init+0x0/0x85 returned 0 after 0 usecs calling test_atomic64+0x0/0x613 @ 1 atomic64 test passed for i586+ platform with CX8 and with SSE initcall test_atomic64+0x0/0x613 returned 0 after 9765 usecs calling regulator_init+0x0/0x2c @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2c returned 0 after 0 usecs calling cpuidle_init+0x0/0x19 @ 1 initcall cpuidle_init+0x0/0x19 returned 0 after 0 usecs calling sock_init+0x0/0x5a @ 1 initcall sock_init+0x0/0x5a returned 0 after 0 usecs calling net_inuse_init+0x0/0x25 @ 1 initcall net_inuse_init+0x0/0x25 returned 0 after 0 usecs calling netpoll_init+0x0/0x25 @ 1 initcall netpoll_init+0x0/0x25 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x19e @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x19e returned 0 after 0 usecs calling olpc_init+0x0/0x151 @ 1 initcall olpc_init+0x0/0x151 returned 0 after 0 usecs calling bdi_class_init+0x0/0x40 @ 1 initcall bdi_class_init+0x0/0x40 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x1e @ 1 initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs calling gpiolib_sysfs_init+0x0/0xa2 @ 1 initcall gpiolib_sysfs_init+0x0/0xa2 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x14 @ 1 initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs calling pci_driver_init+0x0/0xf @ 1 initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs calling lcd_class_init+0x0/0x46 @ 1 initcall lcd_class_init+0x0/0x46 returned 0 after 0 usecs calling backlight_class_init+0x0/0x54 @ 1 initcall backlight_class_init+0x0/0x54 returned 0 after 0 usecs calling video_output_class_init+0x0/0x14 @ 1 initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs calling tty_class_init+0x0/0x2f @ 1 initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc4 @ 1 initcall vtconsole_class_init+0x0/0xc4 returned 0 after 0 usecs calling spi_init+0x0/0x99 @ 1 initcall spi_init+0x0/0x99 returned 0 after 0 usecs calling i2c_init+0x0/0x57 @ 1 i2c-core: driver [dummy] registered initcall i2c_init+0x0/0x57 returned 0 after 0 usecs calling amd_postcore_init+0x0/0x39 @ 1 initcall amd_postcore_init+0x0/0x39 returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x1e @ 1 initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs calling init_pit_clocksource+0x0/0x83 @ 1 initcall init_pit_clocksource+0x0/0x83 returned 0 after 0 usecs calling dmi_id_init+0x0/0x302 @ 1 initcall dmi_id_init+0x0/0x302 returned 0 after 0 usecs calling dma_bus_init+0x0/0x32 @ 1 initcall dma_bus_init+0x0/0x32 returned 0 after 0 usecs calling dma_channel_table_init+0x0/0xe6 @ 1 initcall dma_channel_table_init+0x0/0xe6 returned 0 after 0 usecs calling dca_init+0x0/0x22 @ 1 dca service started, version 1.12.1 initcall dca_init+0x0/0x22 returned 0 after 0 usecs calling pci_arch_init+0x0/0x47 @ 1 PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5 initcall pci_arch_init+0x0/0x47 returned 0 after 9765 usecs calling topology_init+0x0/0x13 @ 1 initcall topology_init+0x0/0x13 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x387 @ 1 initcall param_sysfs_init+0x0/0x387 returned 0 after 0 usecs calling pm_sysrq_init+0x0/0x20 @ 1 initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs calling init_slow_work+0x0/0x2d @ 1 initcall init_slow_work+0x0/0x2d returned 0 after 0 usecs calling default_bdi_init+0x0/0xae @ 1 initcall default_bdi_init+0x0/0xae returned 0 after 0 usecs calling init_bio+0x0/0xe8 @ 1 bio: create slab at 0 initcall init_bio+0x0/0xe8 returned 0 after 0 usecs calling fsnotify_init+0x0/0xf @ 1 initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0xe7 @ 1 initcall fsnotify_notification_init+0x0/0xe7 returned 0 after 0 usecs calling cryptomgr_init+0x0/0xf @ 1 initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs calling blk_settings_init+0x0/0x21 @ 1 initcall blk_settings_init+0x0/0x21 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x30 @ 1 initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs calling blk_softirq_init+0x0/0x2a @ 1 initcall blk_softirq_init+0x0/0x2a returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x2a @ 1 initcall blk_iopoll_setup+0x0/0x2a returned 0 after 0 usecs calling genhd_device_init+0x0/0x50 @ 1 initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x30 @ 1 initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0 usecs calling gpiolib_debugfs_init+0x0/0x2b @ 1 initcall gpiolib_debugfs_init+0x0/0x2b returned 0 after 0 usecs calling max7300_init+0x0/0x11 @ 1 i2c-core: driver [max7300] registered initcall max7300_init+0x0/0x11 returned 0 after 0 usecs calling max7301_init+0x0/0xf @ 1 initcall max7301_init+0x0/0xf returned 0 after 0 usecs calling max732x_init+0x0/0x11 @ 1 i2c-core: driver [max732x] registered initcall max732x_init+0x0/0x11 returned 0 after 0 usecs calling mcp23s08_init+0x0/0xf @ 1 initcall mcp23s08_init+0x0/0xf returned 0 after 0 usecs calling pca953x_init+0x0/0x11 @ 1 i2c-core: driver [pca953x] registered initcall pca953x_init+0x0/0x11 returned 0 after 0 usecs calling wm831x_gpio_init+0x0/0xf @ 1 initcall wm831x_gpio_init+0x0/0xf returned 0 after 0 usecs calling wm8994_gpio_init+0x0/0xf @ 1 initcall wm8994_gpio_init+0x0/0xf returned 0 after 0 usecs calling pci_slot_init+0x0/0x50 @ 1 initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs calling max8925_regulator_init+0x0/0xf @ 1 initcall max8925_regulator_init+0x0/0xf returned 0 after 0 usecs calling wm8350_regulator_init+0x0/0xf @ 1 initcall wm8350_regulator_init+0x0/0xf returned 0 after 0 usecs calling pcf50633_regulator_init+0x0/0xf @ 1 initcall pcf50633_regulator_init+0x0/0xf returned 0 after 0 usecs calling pcap_regulator_init+0x0/0xf @ 1 initcall pcap_regulator_init+0x0/0xf returned 0 after 0 usecs calling tps_65023_init+0x0/0x11 @ 1 i2c-core: driver [tps65023] registered initcall tps_65023_init+0x0/0x11 returned 0 after 9765 usecs calling tps6507x_pmic_init+0x0/0xf @ 1 initcall tps6507x_pmic_init+0x0/0xf returned 0 after 0 usecs calling pm8607_regulator_init+0x0/0xf @ 1 initcall pm8607_regulator_init+0x0/0xf returned 0 after 0 usecs calling misc_init+0x0/0xae @ 1 initcall misc_init+0x0/0xae returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x76 @ 1 vgaarb: loaded initcall vga_arb_device_init+0x0/0x76 returned 0 after 0 usecs calling cn_init+0x0/0x9e @ 1 initcall cn_init+0x0/0x9e returned 0 after 0 usecs calling pm860x_i2c_init+0x0/0x31 @ 1 i2c-core: driver [88PM860x] registered initcall pm860x_i2c_init+0x0/0x31 returned 0 after 0 usecs calling wm831x_i2c_init+0x0/0x31 @ 1 i2c-core: driver [wm831x] registered initcall wm831x_i2c_init+0x0/0x31 returned 0 after 0 usecs calling wm8350_i2c_init+0x0/0x11 @ 1 i2c-core: driver [wm8350] registered initcall wm8350_i2c_init+0x0/0x11 returned 0 after 9765 usecs calling tps6507x_i2c_init+0x0/0x11 @ 1 i2c-core: driver [tps6507x] registered initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 9765 usecs calling mc13783_init+0x0/0xf @ 1 initcall mc13783_init+0x0/0xf returned 0 after 0 usecs calling ezx_pcap_init+0x0/0xf @ 1 initcall ezx_pcap_init+0x0/0xf returned 0 after 0 usecs calling da903x_init+0x0/0x11 @ 1 i2c-core: driver [da903x] registered initcall da903x_init+0x0/0x11 returned 0 after 9765 usecs calling max8925_i2c_init+0x0/0x31 @ 1 i2c-core: driver [max8925] registered initcall max8925_i2c_init+0x0/0x31 returned 0 after 9765 usecs calling pcf50633_init+0x0/0x11 @ 1 i2c-core: driver [pcf50633] registered initcall pcf50633_init+0x0/0x11 returned 0 after 0 usecs calling ab3100_i2c_init+0x0/0x11 @ 1 i2c-core: driver [ab3100] registered initcall ab3100_i2c_init+0x0/0x11 returned 0 after 0 usecs calling ab8500_spi_init+0x0/0xf @ 1 initcall ab8500_spi_init+0x0/0xf returned 0 after 0 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 0 usecs calling ata_init+0x0/0x2bc @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x2bc returned 0 after 0 usecs calling phy_init+0x0/0x2b @ 1 initcall phy_init+0x0/0x2b returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x2d @ 1 initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 usecs calling nop_usb_xceiv_init+0x0/0xf @ 1 initcall nop_usb_xceiv_init+0x0/0xf returned 0 after 0 usecs calling usb_init+0x0/0x143 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x143 returned 0 after 19531 usecs calling serio_init+0x0/0x8d @ 1 initcall serio_init+0x0/0x8d returned 0 after 0 usecs calling gameport_init+0x0/0x8d @ 1 initcall gameport_init+0x0/0x8d returned 0 after 0 usecs calling input_init+0x0/0x128 @ 1 initcall input_init+0x0/0x128 returned 0 after 0 usecs calling tca6416_keypad_init+0x0/0x11 @ 1 i2c-core: driver [tca6416-keypad] registered initcall tca6416_keypad_init+0x0/0x11 returned 0 after 0 usecs calling pps_init+0x0/0xa3 @ 1 LinuxPPS API ver. 1 registered Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti initcall pps_init+0x0/0xa3 returned 0 after 9765 usecs calling power_supply_class_init+0x0/0x39 @ 1 initcall power_supply_class_init+0x0/0x39 returned 0 after 0 usecs calling hwmon_init+0x0/0x101 @ 1 initcall hwmon_init+0x0/0x101 returned 0 after 0 usecs calling md_init+0x0/0xdf @ 1 initcall md_init+0x0/0xdf returned 0 after 0 usecs calling mmc_init+0x0/0x7c @ 1 initcall mmc_init+0x0/0x7c returned 0 after 0 usecs calling leds_init+0x0/0x3d @ 1 initcall leds_init+0x0/0x3d returned 0 after 0 usecs calling init_soundcore+0x0/0x8f @ 1 initcall init_soundcore+0x0/0x8f returned 0 after 0 usecs calling pci_subsys_init+0x0/0x48 @ 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff] pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff] pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff] pci 0000:05:07.0: supports D1 D2 pci 0000:05:07.0: PME# supported from D1 D2 D3hot pci 0000:05:07.0: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci 0000:00:0b.0: PCI bridge to [bus 04-04] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0e.0: PCI bridge to [bus 01-01] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none pci 0000:00:00.0: default IRQ router [10de:005e] PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x48 returned 0 after 332031 usecs calling proto_init+0x0/0xf @ 1 initcall proto_init+0x0/0xf returned 0 after 0 usecs calling net_dev_init+0x0/0x125 @ 1 initcall net_dev_init+0x0/0x125 returned 0 after 0 usecs calling neigh_init+0x0/0x7d @ 1 initcall neigh_init+0x0/0x7d returned 0 after 0 usecs calling pktsched_init+0x0/0xe7 @ 1 initcall pktsched_init+0x0/0xe7 returned 0 after 0 usecs calling tc_filter_init+0x0/0x53 @ 1 initcall tc_filter_init+0x0/0x53 returned 0 after 0 usecs calling tc_action_init+0x0/0x53 @ 1 initcall tc_action_init+0x0/0x53 returned 0 after 0 usecs calling genl_init+0x0/0x80 @ 1 initcall genl_init+0x0/0x80 returned 0 after 0 usecs calling cipso_v4_init+0x0/0x55 @ 1 initcall cipso_v4_init+0x0/0x55 returned 0 after 0 usecs calling wanrouter_init+0x0/0x5c @ 1 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. initcall wanrouter_init+0x0/0x5c returned 0 after 0 usecs calling bt_init+0x0/0x54 @ 1 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x54 returned 0 after 19531 usecs calling atm_init+0x0/0xd9 @ 1 NET: Registered protocol family 8 NET: Registered protocol family 20 initcall atm_init+0x0/0xd9 returned 0 after 9765 usecs calling wireless_nlevent_init+0x0/0xf @ 1 initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs calling netlbl_init+0x0/0x7e @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x7e returned 0 after 9765 usecs calling wpan_phy_class_init+0x0/0x33 @ 1 initcall wpan_phy_class_init+0x0/0x33 returned 0 after 0 usecs calling sysctl_init+0x0/0xa8 @ 1 initcall sysctl_init+0x0/0xa8 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x4f @ 1 Switching to clocksource tsc initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs calling ftrace_init_debugfs+0x0/0x151 @ 1 initcall ftrace_init_debugfs+0x0/0x151 returned 0 after 15 usecs calling rb_init_debugfs+0x0/0x30 @ 1 initcall rb_init_debugfs+0x0/0x30 returned 0 after 1 usecs calling tracer_init_debugfs+0x0/0x2dd @ 1 initcall tracer_init_debugfs+0x0/0x2dd returned 0 after 65 usecs calling init_trace_printk_function_export+0x0/0x34 @ 1 initcall init_trace_printk_function_export+0x0/0x34 returned 0 after 1 usecs calling event_trace_init+0x0/0x19a @ 1 initcall event_trace_init+0x0/0x19a returned 0 after 13361 usecs calling init_pipe_fs+0x0/0x3d @ 1 initcall init_pipe_fs+0x0/0x3d returned 0 after 10 usecs calling eventpoll_init+0x0/0xbe @ 1 initcall eventpoll_init+0x0/0xbe returned 0 after 4 usecs calling anon_inode_init+0x0/0xfa @ 1 initcall anon_inode_init+0x0/0xfa returned 0 after 3 usecs calling fscache_init+0x0/0xa6 @ 1 Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded initcall fscache_init+0x0/0xa6 returned 0 after 7229 usecs calling cachefiles_init+0x0/0x9a @ 1 CacheFiles: Loaded initcall cachefiles_init+0x0/0x9a returned 0 after 1742 usecs calling tomoyo_initerface_init+0x0/0x155 @ 1 initcall tomoyo_initerface_init+0x0/0x155 returned 0 after 23 usecs calling blk_scsi_ioctl_init+0x0/0x288 @ 1 initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs calling chr_dev_init+0x0/0xd0 @ 1 initcall chr_dev_init+0x0/0xd0 returned 0 after 103 usecs calling firmware_class_init+0x0/0x14 @ 1 initcall firmware_class_init+0x0/0x14 returned 0 after 6 usecs calling ieee1394_init+0x0/0x226 @ 1 initcall ieee1394_init+0x0/0x226 returned 0 after 65 usecs calling init_pcmcia_bus+0x0/0x5f @ 1 initcall init_pcmcia_bus+0x0/0x5f returned 0 after 10 usecs calling pcibios_assign_resources+0x0/0x6c @ 1 pci 0000:00:09.0: PCI bridge to [bus 05-05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 04-04] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem disabled] pci 0000:00:0b.0: bridge window [mem pref disabled] pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem disabled] pci 0000:00:0c.0: bridge window [mem pref disabled] pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: bridge window [io disabled] pci 0000:00:0d.0: bridge window [mem disabled] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref] pci 0000:00:0e.0: PCI bridge to [bus 01-01] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] initcall pcibios_assign_resources+0x0/0x6c returned 0 after 157805 usecs calling sysctl_core_init+0x0/0x2d @ 1 initcall sysctl_core_init+0x0/0x2d returned 0 after 6 usecs calling inet_init+0x0/0x26c @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) initcall inet_init+0x0/0x26c returned 0 after 37180 usecs calling af_unix_init+0x0/0x4e @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x4e returned 0 after 2987 usecs calling init_sunrpc+0x0/0x53 @ 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x53 returned 0 after 11714 usecs calling pci_apply_final_quirks+0x0/0x108 @ 1 pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x108 returned 0 after 23315 usecs calling populate_rootfs+0x0/0x267 @ 1 initcall populate_rootfs+0x0/0x267 returned 0 after 60 usecs calling pci_iommu_init+0x0/0x21 @ 1 DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config initcall pci_iommu_init+0x0/0x21 returned 0 after 11984 usecs calling irqfd_module_init+0x0/0x3e @ 1 initcall irqfd_module_init+0x0/0x3e returned 0 after 38 usecs calling i8259A_init_sysfs+0x0/0x1d @ 1 initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 24 usecs calling sbf_init+0x0/0x109 @ 1 initcall sbf_init+0x0/0x109 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x1d @ 1 initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 11 usecs calling add_rtc_cmos+0x0/0x48 @ 1 platform rtc_cmos: registered platform RTC device (no PNP device found) initcall add_rtc_cmos+0x0/0x48 returned 0 after 6222 usecs calling cache_sysfs_init+0x0/0x1f9 @ 1 initcall cache_sysfs_init+0x0/0x1f9 returned 0 after 0 usecs calling mcheck_init_device+0x0/0x1d3 @ 1 initcall mcheck_init_device+0x0/0x1d3 returned -5 after 0 usecs initcall mcheck_init_device+0x0/0x1d3 returned with error code -5 calling inject_init+0x0/0x30 @ 1 Machine check injector initialized initcall inject_init+0x0/0x30 returned 0 after 3089 usecs calling cpuid_init+0x0/0xe9 @ 1 initcall cpuid_init+0x0/0xe9 returned 0 after 30 usecs calling add_pcspkr+0x0/0x2c @ 1 initcall add_pcspkr+0x0/0x2c returned 0 after 12 usecs calling scx200_init+0x0/0x26 @ 1 scx200: NatSemi SCx200 Driver initcall scx200_init+0x0/0x26 returned 0 after 2657 usecs calling start_periodic_check_for_corruption+0x0/0x40 @ 1 Scanning for low memory corruption every 60 seconds initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 4506 usecs calling aes_init+0x0/0xf @ 1 initcall aes_init+0x0/0xf returned 0 after 74 usecs calling init+0x0/0xf @ 1 initcall init+0x0/0xf returned 0 after 14 usecs calling proc_execdomains_init+0x0/0x28 @ 1 initcall proc_execdomains_init+0x0/0x28 returned 0 after 5 usecs calling ioresources_init+0x0/0x45 @ 1 initcall ioresources_init+0x0/0x45 returned 0 after 2 usecs calling uid_cache_init+0x0/0x8a @ 1 initcall uid_cache_init+0x0/0x8a returned 0 after 5 usecs calling init_posix_timers+0x0/0x159 @ 1 initcall init_posix_timers+0x0/0x159 returned 0 after 1 usecs calling init_posix_cpu_timers+0x0/0xb9 @ 1 initcall init_posix_cpu_timers+0x0/0xb9 returned 0 after 0 usecs calling nsproxy_cache_init+0x0/0x33 @ 1 initcall nsproxy_cache_init+0x0/0x33 returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x1d @ 1 initcall timekeeping_init_device+0x0/0x1d returned 0 after 13 usecs calling init_clocksource_sysfs+0x0/0x43 @ 1 initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 13 usecs calling init_timer_list_procfs+0x0/0x31 @ 1 initcall init_timer_list_procfs+0x0/0x31 returned 0 after 1 usecs calling futex_init+0x0/0x53 @ 1 initcall futex_init+0x0/0x53 returned 0 after 5 usecs calling proc_dma_init+0x0/0x28 @ 1 initcall proc_dma_init+0x0/0x28 returned 0 after 1 usecs calling kallsyms_init+0x0/0x2b @ 1 initcall kallsyms_init+0x0/0x2b returned 0 after 0 usecs calling crash_save_vmcoreinfo_init+0x0/0x4b5 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x4b5 returned 0 after 23 usecs calling crash_notes_memory_init+0x0/0x36 @ 1 initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs calling utsname_sysctl_init+0x0/0x11 @ 1 initcall utsname_sysctl_init+0x0/0x11 returned 0 after 3 usecs calling ftrace_nodyn_init+0x0/0x11 @ 1 initcall ftrace_nodyn_init+0x0/0x11 returned 0 after 0 usecs calling init_events+0x0/0x60 @ 1 initcall init_events+0x0/0x60 returned 0 after 5 usecs calling init_sched_switch_trace+0x0/0xf @ 1 initcall init_sched_switch_trace+0x0/0xf returned 0 after 9 usecs calling init_function_trace+0x0/0xf @ 1 initcall init_function_trace+0x0/0xf returned 0 after 1 usecs calling init_irqsoff_tracer+0x0/0x11 @ 1 initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 1 usecs calling init_wakeup_tracer+0x0/0x1d @ 1 initcall init_wakeup_tracer+0x0/0x1d returned 0 after 1 usecs calling init_mmio_trace+0x0/0xf @ 1 initcall init_mmio_trace+0x0/0xf returned 0 after 1 usecs calling init_graph_trace+0x0/0x6b @ 1 initcall init_graph_trace+0x0/0x6b returned 0 after 3 usecs calling init_blk_tracer+0x0/0x57 @ 1 initcall init_blk_tracer+0x0/0x57 returned 0 after 1 usecs calling perf_event_sysfs_init+0x0/0x14 @ 1 initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 2 usecs calling init_per_zone_wmark_min+0x0/0x5b @ 1 initcall init_per_zone_wmark_min+0x0/0x5b returned 0 after 28 usecs calling kswapd_init+0x0/0x13 @ 1 initcall kswapd_init+0x0/0x13 returned 0 after 8 usecs calling setup_vmstat+0x0/0x8b @ 1 initcall setup_vmstat+0x0/0x8b returned 0 after 4 usecs calling mm_sysfs_init+0x0/0x22 @ 1 initcall mm_sysfs_init+0x0/0x22 returned 0 after 2 usecs calling proc_vmalloc_init+0x0/0x2b @ 1 initcall proc_vmalloc_init+0x0/0x2b returned 0 after 1 usecs calling init_emergency_pool+0x0/0x7f @ 1 initcall init_emergency_pool+0x0/0x7f returned 0 after 1 usecs calling ksm_init+0x0/0x1e8 @ 1 initcall ksm_init+0x0/0x1e8 returned 0 after 24 usecs calling fasync_init+0x0/0x30 @ 1 initcall fasync_init+0x0/0x30 returned 0 after 1 usecs calling proc_filesystems_init+0x0/0x28 @ 1 initcall proc_filesystems_init+0x0/0x28 returned 0 after 1 usecs calling dnotify_init+0x0/0x82 @ 1 initcall dnotify_init+0x0/0x82 returned 0 after 1 usecs calling inotify_user_setup+0x0/0x79 @ 1 initcall inotify_user_setup+0x0/0x79 returned 0 after 1 usecs calling aio_setup+0x0/0xad @ 1 initcall aio_setup+0x0/0xad returned 0 after 15 usecs calling proc_locks_init+0x0/0x28 @ 1 initcall proc_locks_init+0x0/0x28 returned 0 after 1 usecs calling init_mbcache+0x0/0x11 @ 1 initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs calling dquot_init+0x0/0x104 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) initcall dquot_init+0x0/0x104 returned 0 after 7676 usecs calling proc_cmdline_init+0x0/0x28 @ 1 initcall proc_cmdline_init+0x0/0x28 returned 0 after 1 usecs calling proc_cpuinfo_init+0x0/0x28 @ 1 initcall proc_cpuinfo_init+0x0/0x28 returned 0 after 1 usecs calling proc_devices_init+0x0/0x28 @ 1 initcall proc_devices_init+0x0/0x28 returned 0 after 1 usecs calling proc_interrupts_init+0x0/0x28 @ 1 initcall proc_interrupts_init+0x0/0x28 returned 0 after 1 usecs calling proc_loadavg_init+0x0/0x28 @ 1 initcall proc_loadavg_init+0x0/0x28 returned 0 after 1 usecs calling proc_meminfo_init+0x0/0x28 @ 1 initcall proc_meminfo_init+0x0/0x28 returned 0 after 1 usecs calling proc_stat_init+0x0/0x28 @ 1 initcall proc_stat_init+0x0/0x28 returned 0 after 1 usecs calling proc_uptime_init+0x0/0x28 @ 1 initcall proc_uptime_init+0x0/0x28 returned 0 after 1 usecs calling proc_version_init+0x0/0x28 @ 1 initcall proc_version_init+0x0/0x28 returned 0 after 1 usecs calling proc_softirqs_init+0x0/0x28 @ 1 initcall proc_softirqs_init+0x0/0x28 returned 0 after 1 usecs calling proc_kmsg_init+0x0/0x2b @ 1 initcall proc_kmsg_init+0x0/0x2b returned 0 after 1 usecs calling proc_page_init+0x0/0x4b @ 1 initcall proc_page_init+0x0/0x4b returned 0 after 2 usecs calling configfs_init+0x0/0xc9 @ 1 initcall configfs_init+0x0/0xc9 returned 0 after 5 usecs calling init_devpts_fs+0x0/0x3d @ 1 initcall init_devpts_fs+0x0/0x3d returned 0 after 9 usecs calling init_ext3_fs+0x0/0x6b @ 1 initcall init_ext3_fs+0x0/0x6b returned 0 after 4 usecs calling journal_init+0x0/0xd6 @ 1 initcall journal_init+0x0/0xd6 returned 0 after 16 usecs calling journal_init+0x0/0xb5 @ 1 initcall journal_init+0x0/0xb5 returned 0 after 3 usecs calling init_ramfs_fs+0x0/0xf @ 1 initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs calling init_fat_fs+0x0/0x4d @ 1 initcall init_fat_fs+0x0/0x4d returned 0 after 1 usecs calling init_vfat_fs+0x0/0xf @ 1 initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs calling init_msdos_fs+0x0/0xf @ 1 initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs calling init_iso9660_fs+0x0/0x6b @ 1 initcall init_iso9660_fs+0x0/0x6b returned 0 after 10 usecs calling init_nfsd+0x0/0xd5 @ 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). initcall init_nfsd+0x0/0xd5 returned 0 after 5040 usecs calling init_nlm+0x0/0x1c @ 1 initcall init_nlm+0x0/0x1c returned 0 after 1 usecs calling init_nls_cp437+0x0/0xf @ 1 initcall init_nls_cp437+0x0/0xf returned 0 after 0 usecs calling init_nls_cp737+0x0/0xf @ 1 initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs calling init_nls_cp852+0x0/0xf @ 1 initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs calling init_nls_cp855+0x0/0xf @ 1 initcall init_nls_cp855+0x0/0xf returned 0 after 0 usecs calling init_nls_cp861+0x0/0xf @ 1 initcall init_nls_cp861+0x0/0xf returned 0 after 0 usecs calling init_nls_cp862+0x0/0xf @ 1 initcall init_nls_cp862+0x0/0xf returned 0 after 0 usecs calling init_nls_cp949+0x0/0xf @ 1 initcall init_nls_cp949+0x0/0xf returned 0 after 0 usecs calling init_nls_cp1251+0x0/0xf @ 1 initcall init_nls_cp1251+0x0/0xf returned 0 after 0 usecs calling init_nls_ascii+0x0/0xf @ 1 initcall init_nls_ascii+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_2+0x0/0xf @ 1 initcall init_nls_iso8859_2+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_4+0x0/0xf @ 1 initcall init_nls_iso8859_4+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_6+0x0/0xf @ 1 initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_7+0x0/0xf @ 1 initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_9+0x0/0xf @ 1 initcall init_nls_iso8859_9+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_14+0x0/0xf @ 1 initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 usecs calling init_nls_iso8859_15+0x0/0xf @ 1 initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs calling init_nls_koi8_r+0x0/0xf @ 1 initcall init_nls_koi8_r+0x0/0xf returned 0 after 0 usecs calling init_nls_koi8_u+0x0/0xf @ 1 initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 usecs calling init_nls_koi8_ru+0x0/0x39 @ 1 initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 usecs calling init_nls_utf8+0x0/0x21 @ 1 initcall init_nls_utf8+0x0/0x21 returned 0 after 0 usecs calling init_ncp_fs+0x0/0x5b @ 1 initcall init_ncp_fs+0x0/0x5b returned 0 after 1 usecs calling init_ntfs_fs+0x0/0x1ca @ 1 NTFS driver 2.1.29 [Flags: R/O]. initcall init_ntfs_fs+0x0/0x1ca returned 0 after 2903 usecs calling init_autofs4_fs+0x0/0x1e @ 1 initcall init_autofs4_fs+0x0/0x1e returned 0 after 17 usecs calling init_jfs_fs+0x0/0x227 @ 1 JFS: nTxBlock = 7972, nTxLock = 63779 initcall init_jfs_fs+0x0/0x227 returned 0 after 6260 usecs calling init_xfs_fs+0x0/0xb3 @ 1 SGI XFS with security attributes, debug enabled SGI XFS Quota Management subsystem initcall init_xfs_fs+0x0/0xb3 returned 0 after 7316 usecs calling init_nilfs_fs+0x0/0xe2 @ 1 NILFS version 2 loaded initcall init_nilfs_fs+0x0/0xe2 returned 0 after 2058 usecs calling ocfs2_init+0x0/0x475 @ 1 OCFS2 1.5.0 initcall ocfs2_init+0x0/0x475 returned 0 after 1150 usecs calling ocfs2_stack_glue_init+0x0/0x80 @ 1 initcall ocfs2_stack_glue_init+0x0/0x80 returned 0 after 9 usecs calling o2cb_stack_init+0x0/0xf @ 1 ocfs2: Registered cluster interface o2cb initcall o2cb_stack_init+0x0/0xf returned 0 after 3574 usecs calling init_dlmfs_fs+0x0/0xd9 @ 1 OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded initcall init_dlmfs_fs+0x0/0xd9 returned 0 after 5053 usecs calling init_o2nm+0x0/0x99 @ 1 OCFS2 Node Manager 1.5.0 initcall init_o2nm+0x0/0x99 returned 0 after 2319 usecs calling dlm_init+0x0/0x3a1 @ 1 OCFS2 DLM 1.5.0 initcall dlm_init+0x0/0x3a1 returned 0 after 1472 usecs calling init_btrfs_fs+0x0/0x8a @ 1 Btrfs loaded initcall init_btrfs_fs+0x0/0x8a returned 0 after 1234 usecs calling init_ceph+0x0/0x178 @ 1 ceph: loaded (mon/mds/osd proto 15/32/24, osdmap 5/5 5/5) initcall init_ceph+0x0/0x178 returned 0 after 5042 usecs calling ipc_init+0x0/0x20 @ 1 msgmni has been set to 1993 initcall ipc_init+0x0/0x20 returned 0 after 2477 usecs calling ipc_sysctl_init+0x0/0x11 @ 1 initcall ipc_sysctl_init+0x0/0x11 returned 0 after 1 usecs calling init_mqueue_fs+0x0/0x96 @ 1 initcall init_mqueue_fs+0x0/0x96 returned 0 after 19 usecs calling key_proc_init+0x0/0x38 @ 1 initcall key_proc_init+0x0/0x38 returned 0 after 1 usecs calling crypto_wq_init+0x0/0x3b @ 1 initcall crypto_wq_init+0x0/0x3b returned 0 after 11 usecs calling crypto_algapi_init+0x0/0xc @ 1 initcall crypto_algapi_init+0x0/0xc returned 0 after 2 usecs calling skcipher_module_init+0x0/0x11 @ 1 initcall skcipher_module_init+0x0/0x11 returned 0 after 0 usecs calling chainiv_module_init+0x0/0xf @ 1 initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs calling eseqiv_module_init+0x0/0xf @ 1 initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs calling seqiv_module_init+0x0/0xf @ 1 initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs calling hmac_module_init+0x0/0xf @ 1 initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs calling md4_mod_init+0x0/0xf @ 1 initcall md4_mod_init+0x0/0xf returned 0 after 62 usecs calling md5_mod_init+0x0/0xf @ 1 initcall md5_mod_init+0x0/0xf returned 0 after 36 usecs calling rmd128_mod_init+0x0/0xf @ 1 initcall rmd128_mod_init+0x0/0xf returned 0 after 47 usecs calling rmd256_mod_init+0x0/0xf @ 1 initcall rmd256_mod_init+0x0/0xf returned 0 after 42 usecs calling rmd320_mod_init+0x0/0xf @ 1 initcall rmd320_mod_init+0x0/0xf returned 0 after 43 usecs calling sha1_generic_mod_init+0x0/0xf @ 1 initcall sha1_generic_mod_init+0x0/0xf returned 0 after 39 usecs calling sha256_generic_mod_init+0x0/0x33 @ 1 initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 66 usecs calling sha512_generic_mod_init+0x0/0x33 @ 1 initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 153 usecs calling wp512_mod_init+0x0/0x59 @ 1 initcall wp512_mod_init+0x0/0x59 returned 0 after 399 usecs calling crypto_ecb_module_init+0x0/0xf @ 1 initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs calling crypto_cbc_module_init+0x0/0xf @ 1 initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs calling crypto_pcbc_module_init+0x0/0xf @ 1 initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs calling crypto_cts_module_init+0x0/0xf @ 1 initcall crypto_cts_module_init+0x0/0xf returned 0 after 0 usecs calling crypto_module_init+0x0/0xf @ 1 initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs calling crypto_ctr_module_init+0x0/0x35 @ 1 initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs calling des_generic_mod_init+0x0/0x33 @ 1 initcall des_generic_mod_init+0x0/0x33 returned 0 after 76 usecs calling fcrypt_mod_init+0x0/0xf @ 1 alg: No test for fcrypt (fcrypt-generic) initcall fcrypt_mod_init+0x0/0xf returned 0 after 3601 usecs calling twofish_mod_init+0x0/0xf @ 1 initcall twofish_mod_init+0x0/0xf returned 0 after 109 usecs calling aes_init+0x0/0xf @ 1 initcall aes_init+0x0/0xf returned 0 after 50 usecs calling camellia_init+0x0/0xf @ 1 initcall camellia_init+0x0/0xf returned 0 after 40 usecs calling cast6_mod_init+0x0/0xf @ 1 initcall cast6_mod_init+0x0/0xf returned 0 after 41 usecs calling arc4_init+0x0/0xf @ 1 initcall arc4_init+0x0/0xf returned 0 after 69 usecs calling salsa20_generic_mod_init+0x0/0xf @ 1 initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 13 usecs calling zlib_mod_init+0x0/0xf @ 1 initcall zlib_mod_init+0x0/0xf returned 0 after 661 usecs calling michael_mic_init+0x0/0xf @ 1 initcall michael_mic_init+0x0/0xf returned 0 after 34 usecs calling crc32c_mod_init+0x0/0xf @ 1 initcall crc32c_mod_init+0x0/0xf returned 0 after 52 usecs calling lzo_mod_init+0x0/0xf @ 1 initcall lzo_mod_init+0x0/0xf returned 0 after 34 usecs calling krng_mod_init+0x0/0xf @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0xf returned 0 after 2744 usecs calling prng_mod_init+0x0/0x1d @ 1 alg: No test for fips(ansi_cprng) (fips_ansi_cprng) initcall prng_mod_init+0x0/0x1d returned 0 after 11543 usecs calling ghash_mod_init+0x0/0xf @ 1 initcall ghash_mod_init+0x0/0xf returned 0 after 40 usecs calling proc_genhd_init+0x0/0x45 @ 1 initcall proc_genhd_init+0x0/0x45 returned 0 after 8 usecs calling bsg_init+0x0/0x11b @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) initcall bsg_init+0x0/0x11b returned 0 after 5971 usecs calling noop_init+0x0/0x11 @ 1 io scheduler noop registered initcall noop_init+0x0/0x11 returned 0 after 2559 usecs calling cfq_init+0x0/0x9f @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0x9f returned 0 after 3331 usecs calling libcrc32c_mod_init+0x0/0x25 @ 1 initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 1 usecs calling init_kmp+0x0/0xf @ 1 initcall init_kmp+0x0/0xf returned 0 after 0 usecs calling init_bm+0x0/0xf @ 1 initcall init_bm+0x0/0xf returned 0 after 0 usecs calling init_fsm+0x0/0xf @ 1 initcall init_fsm+0x0/0xf returned 0 after 0 usecs calling adp5520_gpio_init+0x0/0xf @ 1 initcall adp5520_gpio_init+0x0/0xf returned 0 after 15 usecs calling adp5588_gpio_init+0x0/0x11 @ 1 i2c-core: driver [adp5588-gpio] registered initcall adp5588_gpio_init+0x0/0x11 returned 0 after 3763 usecs calling cs5535_gpio_init+0x0/0x1d3 @ 1 initcall cs5535_gpio_init+0x0/0x1d3 returned -19 after 11 usecs calling rdc321x_gpio_init+0x0/0xf @ 1 initcall rdc321x_gpio_init+0x0/0xf returned 0 after 8 usecs calling pci_proc_init+0x0/0x65 @ 1 initcall pci_proc_init+0x0/0x65 returned 0 after 43 usecs calling pcie_portdrv_init+0x0/0x52 @ 1 pcieport 0000:00:0b.0: setting latency timer to 64 pcieport 0000:00:0c.0: setting latency timer to 64 pcieport 0000:00:0d.0: setting latency timer to 64 pcieport 0000:00:0e.0: setting latency timer to 64 initcall pcie_portdrv_init+0x0/0x52 returned 0 after 17825 usecs calling aer_service_init+0x0/0xa @ 1 initcall aer_service_init+0x0/0xa returned -6 after 0 usecs initcall aer_service_init+0x0/0xa returned with error code -6 calling aer_inject_init+0x0/0xf @ 1 initcall aer_inject_init+0x0/0xf returned 0 after 18 usecs calling l4f00242t03_init+0x0/0xf @ 1 initcall l4f00242t03_init+0x0/0xf returned 0 after 8 usecs calling lms283gf05_init+0x0/0xf @ 1 initcall lms283gf05_init+0x0/0xf returned 0 after 7 usecs calling ltv350qv_init+0x0/0xf @ 1 initcall ltv350qv_init+0x0/0xf returned 0 after 7 usecs calling s6e63m0_init+0x0/0xf @ 1 initcall s6e63m0_init+0x0/0xf returned 0 after 7 usecs calling da903x_backlight_init+0x0/0xf @ 1 initcall da903x_backlight_init+0x0/0xf returned 0 after 9 usecs calling kb3886_init+0x0/0x33 @ 1 initcall kb3886_init+0x0/0x33 returned -19 after 0 usecs calling adp8860_init+0x0/0x11 @ 1 i2c-core: driver [adp8860_bl] registered initcall adp8860_init+0x0/0x11 returned 0 after 3584 usecs calling pcf50633_bl_init+0x0/0xf @ 1 initcall pcf50633_bl_init+0x0/0xf returned 0 after 8 usecs calling regulator_userspace_consumer_init+0x0/0xf @ 1 initcall regulator_userspace_consumer_init+0x0/0xf returned 0 after 9 usecs calling rand_initialize+0x0/0x30 @ 1 initcall rand_initialize+0x0/0x30 returned 0 after 28 usecs calling tty_init+0x0/0x105 @ 1 initcall tty_init+0x0/0x105 returned 0 after 869 usecs calling pty_init+0x0/0x439 @ 1 initcall pty_init+0x0/0x439 returned 0 after 13159 usecs calling sysrq_init+0x0/0x7b @ 1 initcall sysrq_init+0x0/0x7b returned 0 after 4 usecs calling nozomi_init+0x0/0xfc @ 1 Initializing Nozomi driver 2.1d (build date: Sep 3 2010 18:18:05) initcall nozomi_init+0x0/0xfc returned 0 after 5794 usecs calling epca_module_init+0x0/0x3d2 @ 1 DIGI epca driver version 1.3.0.1-LK2.6 loaded. initcall epca_module_init+0x0/0x3d2 returned 0 after 34304 usecs calling mxser_module_init+0x0/0x5b9 @ 1 MOXA Smartio/Industio family driver version 2.0.5 initcall mxser_module_init+0x0/0x5b9 returned 0 after 4354 usecs calling ip2_loadmain+0x0/0x1309 @ 1 Computone IntelliPort Plus multiport driver version 1.2.14 initcall ip2_loadmain+0x0/0x1309 returned 0 after 5121 usecs calling riscom8_init_module+0x0/0x428 @ 1 rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. rc0: RISCom/8 Board at 0x220 not found. rc1: RISCom/8 Board at 0x240 not found. rc2: RISCom/8 Board at 0x250 not found. rc3: RISCom/8 Board at 0x260 not found. rc: No RISCom/8 boards detected. initcall riscom8_init_module+0x0/0x428 returned -5 after 30761 usecs initcall riscom8_init_module+0x0/0x428 returned with error code -5 calling isicom_init+0x0/0x151 @ 1 initcall isicom_init+0x0/0x151 returned 0 after 23 usecs calling synclink_init+0x0/0x235 @ 1 SyncLink serial driver $Revision: 4.38 $ SyncLink serial driver $Revision: 4.38 $, tty major#251 initcall synclink_init+0x0/0x235 returned 0 after 18736 usecs calling slgt_init+0x0/0x186 @ 1 SyncLink GT SyncLink GT, tty major#250 SyncLink GT no devices found initcall slgt_init+0x0/0x186 returned 0 after 6093 usecs calling n_hdlc_init+0x0/0x90 @ 1 HDLC line discipline maxframe=4096 N_HDLC line discipline registered. initcall n_hdlc_init+0x0/0x90 returned 0 after 6126 usecs calling raw_init+0x0/0xdf @ 1 initcall raw_init+0x0/0xdf returned 0 after 54 usecs calling applicom_init+0x0/0x496 @ 1 Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0x496 returned -6 after 13768 usecs initcall applicom_init+0x0/0x496 returned with error code -6 calling sonypi_init+0x0/0x80 @ 1 sonypi: Sony Programmable I/O Controller Driver v1.26. initcall sonypi_init+0x0/0x80 returned -19 after 4758 usecs calling rtc_init+0x0/0x1d5 @ 1 Real Time Clock Driver v1.12b initcall rtc_init+0x0/0x1d5 returned 0 after 2707 usecs calling i8k_init+0x0/0x2df @ 1 initcall i8k_init+0x0/0x2df returned -19 after 3 usecs calling timeriomem_rng_init+0x0/0xf @ 1 initcall timeriomem_rng_init+0x0/0xf returned 0 after 12 usecs calling mod_init+0x0/0x226 @ 1 initcall mod_init+0x0/0x226 returned -19 after 79 usecs calling mod_init+0x0/0xa6 @ 1 initcall mod_init+0x0/0xa6 returned -19 after 15 usecs calling nsc_gpio_init+0x0/0x17 @ 1 nsc_gpio initializing initcall nsc_gpio_init+0x0/0x17 returned 0 after 1965 usecs calling agp_init+0x0/0x30 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x30 returned 0 after 2729 usecs calling agp_ali_init+0x0/0x24 @ 1 initcall agp_ali_init+0x0/0x24 returned 0 after 15 usecs calling agp_ati_init+0x0/0x24 @ 1 initcall agp_ati_init+0x0/0x24 returned 0 after 11 usecs calling agp_amdk7_init+0x0/0x24 @ 1 initcall agp_amdk7_init+0x0/0x24 returned 0 after 11 usecs calling agp_intel_init+0x0/0x24 @ 1 initcall agp_intel_init+0x0/0x24 returned 0 after 15 usecs calling agp_serverworks_init+0x0/0x24 @ 1 initcall agp_serverworks_init+0x0/0x24 returned 0 after 12 usecs calling cm4040_init+0x0/0xbd @ 1 OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte initcall cm4040_init+0x0/0xbd returned 0 after 5534 usecs calling ipmi_init_msghandler_mod+0x0/0xc @ 1 ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 2994 usecs calling init_ipmi_si+0x0/0x640 @ 1 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) initcall init_ipmi_si+0x0/0x640 returned -19 after 55277 usecs calling ipmi_wdog_init+0x0/0x113 @ 1 IPMI Watchdog: driver initialized initcall ipmi_wdog_init+0x0/0x113 returned 0 after 2984 usecs calling ipmi_poweroff_init+0x0/0x80 @ 1 Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. initcall ipmi_poweroff_init+0x0/0x80 returned 0 after 6202 usecs calling hangcheck_init+0x0/0xaa @ 1 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). initcall hangcheck_init+0x0/0xaa returned 0 after 10622 usecs calling init_tis+0x0/0x452 @ 1 tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255) tpm_tis tpm_tis: Unable to request irq: 255 for use tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291 tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291 tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291 initcall init_tis+0x0/0x452 returned 0 after 24608 usecs calling drm_core_init+0x0/0x12d @ 1 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x12d returned 0 after 3264 usecs calling tdfx_init+0x0/0xf @ 1 initcall tdfx_init+0x0/0xf returned 0 after 17 usecs calling mga_init+0x0/0x19 @ 1 initcall mga_init+0x0/0x19 returned 0 after 11 usecs calling sis_init+0x0/0x19 @ 1 initcall sis_init+0x0/0x19 returned 0 after 21 usecs calling savage_init+0x0/0x19 @ 1 initcall savage_init+0x0/0x19 returned 0 after 60 usecs calling via_init+0x0/0x1e @ 1 initcall via_init+0x0/0x1e returned 0 after 26 usecs calling cn_proc_init+0x0/0x34 @ 1 initcall cn_proc_init+0x0/0x34 returned 0 after 1 usecs calling serial8250_init+0x0/0x156 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A initcall serial8250_init+0x0/0x156 returned 0 after 282289 usecs calling init_serial_cs+0x0/0xf @ 1 initcall init_serial_cs+0x0/0xf returned 0 after 30 usecs calling timbuart_init+0x0/0xf @ 1 initcall timbuart_init+0x0/0xf returned 0 after 9 usecs calling brd_init+0x0/0x165 @ 1 brd: module loaded initcall brd_init+0x0/0x165 returned 0 after 2535 usecs calling cpqarray_init+0x0/0x286 @ 1 Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x286 returned -19 after 2752 usecs calling cciss_init+0x0/0x90 @ 1 HP CISS Driver (v 3.6.20) initcall cciss_init+0x0/0x90 returned 0 after 2358 usecs calling DAC960_init_module+0x0/0x48 @ 1 initcall DAC960_init_module+0x0/0x48 returned 0 after 78 usecs calling mm_init+0x0/0x140 @ 1 MM: desc_per_page = 128 initcall mm_init+0x0/0x140 returned 0 after 2152 usecs calling nbd_init+0x0/0x24e @ 1 nbd: registered device at major 43 initcall nbd_init+0x0/0x24e returned 0 after 4033 usecs calling carm_init+0x0/0x16 @ 1 initcall carm_init+0x0/0x16 returned 0 after 13 usecs calling lkdtm_module_init+0x0/0x1a1 @ 1 lkdtm: No crash points registered, enable through debugfs initcall lkdtm_module_init+0x0/0x1a1 returned 0 after 5012 usecs calling sm501_base_init+0x0/0x20 @ 1 initcall sm501_base_init+0x0/0x20 returned 0 after 24 usecs calling htcpld_core_init+0x0/0x24 @ 1 i2c-core: driver [htcpld-chip] registered initcall htcpld_core_init+0x0/0x24 returned -19 after 3692 usecs calling wm8994_i2c_init+0x0/0x31 @ 1 i2c-core: driver [wm8994] registered initcall wm8994_i2c_init+0x0/0x31 returned 0 after 3244 usecs calling adp5520_init+0x0/0x11 @ 1 i2c-core: driver [adp5520] registered initcall adp5520_init+0x0/0x11 returned 0 after 3329 usecs calling lpc_sch_init+0x0/0x16 @ 1 initcall lpc_sch_init+0x0/0x16 returned 0 after 13 usecs calling rdc321x_sb_init+0x0/0x16 @ 1 initcall rdc321x_sb_init+0x0/0x16 returned 0 after 13 usecs calling mac_hid_init+0x0/0x1c @ 1 initcall mac_hid_init+0x0/0x1c returned 0 after 5 usecs calling scsi_tgt_init+0x0/0x8f @ 1 initcall scsi_tgt_init+0x0/0x8f returned 0 after 272 usecs calling raid_init+0x0/0xf @ 1 initcall raid_init+0x0/0xf returned 0 after 13 usecs calling spi_transport_init+0x0/0x77 @ 1 initcall spi_transport_init+0x0/0x77 returned 0 after 14 usecs calling fc_transport_init+0x0/0x71 @ 1 initcall fc_transport_init+0x0/0x71 returned 0 after 26 usecs calling iscsi_transport_init+0x0/0x145 @ 1 Loading iSCSI transport class v2.0-870. initcall iscsi_transport_init+0x0/0x145 returned 0 after 3541 usecs calling sas_transport_init+0x0/0x9f @ 1 initcall sas_transport_init+0x0/0x9f returned 0 after 39 usecs calling sas_class_init+0x0/0x36 @ 1 initcall sas_class_init+0x0/0x36 returned 0 after 4 usecs calling srp_transport_init+0x0/0x33 @ 1 initcall srp_transport_init+0x0/0x33 returned 0 after 13 usecs calling libfc_init+0x0/0x3a @ 1 initcall libfc_init+0x0/0x3a returned 0 after 24 usecs calling fnic_init_module+0x0/0x1c3 @ 1 fnic: Cisco FCoE HBA Driver, ver 1.4.0.145 initcall fnic_init_module+0x0/0x1c3 returned 0 after 3789 usecs calling advansys_init+0x0/0x16 @ 1 initcall advansys_init+0x0/0x16 returned 0 after 14 usecs calling adpt_init+0x0/0xf2c @ 1 Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... initcall adpt_init+0x0/0xf2c returned -19 after 7827 usecs calling ahc_linux_init+0x0/0x5c @ 1 initcall ahc_linux_init+0x0/0x5c returned 0 after 22 usecs calling ahd_linux_init+0x0/0x6c @ 1 initcall ahd_linux_init+0x0/0x6c returned 0 after 25 usecs calling aic94xx_init+0x0/0x12e @ 1 aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded initcall aic94xx_init+0x0/0x12e returned 0 after 5379 usecs calling pm8001_init+0x0/0x4c @ 1 initcall pm8001_init+0x0/0x4c returned 0 after 14 usecs calling ips_module_init+0x0/0x3ad @ 1 initcall ips_module_init+0x0/0x3ad returned -19 after 22 usecs calling qla1280_init+0x0/0x16 @ 1 initcall qla1280_init+0x0/0x16 returned 0 after 14 usecs calling qla4xxx_module_init+0x0/0xcb @ 1 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver initcall qla4xxx_module_init+0x0/0xcb returned 0 after 5488 usecs calling lpfc_init+0x0/0xb7 @ 1 Emulex LightPulse Fibre Channel SCSI driver 8.3.12 Copyright(c) 2004-2009 Emulex. All rights reserved. initcall lpfc_init+0x0/0xb7 returned 0 after 9035 usecs calling hpsa_init+0x0/0x16 @ 1 initcall hpsa_init+0x0/0x16 returned 0 after 17 usecs calling atp870u_init+0x0/0x16 @ 1 initcall atp870u_init+0x0/0x16 returned 0 after 14 usecs calling gdth_init+0x0/0xe7 @ 1 GDT-HA: Storage RAID Controller Driver. Version: 3.05 initcall gdth_init+0x0/0xe7 returned 0 after 4692 usecs calling initio_init_driver+0x0/0x16 @ 1 initcall initio_init_driver+0x0/0x16 returned 0 after 13 usecs calling tw_init+0x0/0x2e @ 1 3ware Storage Controller device driver for Linux v1.26.02.003. initcall tw_init+0x0/0x2e returned 0 after 5445 usecs calling twa_init+0x0/0x2e @ 1 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. initcall twa_init+0x0/0x2e returned 0 after 5875 usecs calling init_nsp32+0x0/0x3e @ 1 nsp32: loading... initcall init_nsp32+0x0/0x3e returned 0 after 1642 usecs calling hptiop_module_init+0x0/0x36 @ 1 RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) initcall hptiop_module_init+0x0/0x36 returned 0 after 4604 usecs calling mvs_init+0x0/0x42 @ 1 initcall mvs_init+0x0/0x42 returned 0 after 15 usecs calling bnx2i_mod_init+0x0/0xb0 @ 1 Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, 2010) iscsi: registered transport (bnx2i) initcall bnx2i_mod_init+0x0/0xb0 returned 0 after 8607 usecs calling beiscsi_module_init+0x0/0x9c @ 1 iscsi: registered transport (be2iscsi) initcall beiscsi_module_init+0x0/0x9c returned 0 after 3427 usecs calling pmcraid_init+0x0/0x126 @ 1 initcall pmcraid_init+0x0/0x126 returned 0 after 26 usecs calling pvscsi_init+0x0/0x36 @ 1 VMware PVSCSI driver - version 1.0.1.0-k initcall pvscsi_init+0x0/0x36 returned 0 after 3587 usecs calling init_sd+0x0/0x130 @ 1 initcall init_sd+0x0/0x130 returned 0 after 28 usecs calling init_sg+0x0/0x112 @ 1 initcall init_sg+0x0/0x112 returned 0 after 21 usecs calling ahci_init+0x0/0x16 @ 1 initcall ahci_init+0x0/0x16 returned 0 after 27 usecs calling inic_init+0x0/0x16 @ 1 initcall inic_init+0x0/0x16 returned 0 after 13 usecs calling adma_ata_init+0x0/0x16 @ 1 initcall adma_ata_init+0x0/0x16 returned 0 after 12 usecs calling piix_init+0x0/0x24 @ 1 initcall piix_init+0x0/0x24 returned 0 after 17 usecs calling mv_init+0x0/0x3a @ 1 initcall mv_init+0x0/0x3a returned 0 after 25 usecs calling nv_init+0x0/0x16 @ 1 initcall nv_init+0x0/0x16 returned 0 after 17 usecs calling pdc_ata_init+0x0/0x16 @ 1 initcall pdc_ata_init+0x0/0x16 returned 0 after 15 usecs calling uli_init+0x0/0x16 @ 1 initcall uli_init+0x0/0x16 returned 0 after 13 usecs calling ali_init+0x0/0x40 @ 1 initcall ali_init+0x0/0x40 returned 0 after 16 usecs calling amd_init+0x0/0x16 @ 1 pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 initcall amd_init+0x0/0x16 returned 0 after 22046 usecs calling atiixp_init+0x0/0x16 @ 1 initcall atiixp_init+0x0/0x16 returned 0 after 14 usecs calling cs5520_init+0x0/0x16 @ 1 initcall cs5520_init+0x0/0x16 returned 0 after 13 usecs calling cs5536_init+0x0/0x16 @ 1 initcall cs5536_init+0x0/0x16 returned 0 after 13 usecs calling cy82c693_init+0x0/0x16 @ 1 initcall cy82c693_init+0x0/0x16 returned 0 after 13 usecs calling hpt36x_init+0x0/0x16 @ 1 initcall hpt36x_init+0x0/0x16 returned 0 after 18 usecs calling hpt37x_init+0x0/0x16 @ 1 initcall hpt37x_init+0x0/0x16 returned 0 after 14 usecs calling hpt3x2n_init+0x0/0x16 @ 1 initcall hpt3x2n_init+0x0/0x16 returned 0 after 14 usecs calling it8213_init+0x0/0x16 @ 1 initcall it8213_init+0x0/0x16 returned 0 after 14 usecs calling netcell_init+0x0/0x16 @ 1 initcall netcell_init+0x0/0x16 returned 0 after 16 usecs calling ns87415_init+0x0/0x16 @ 1 initcall ns87415_init+0x0/0x16 returned 0 after 14 usecs calling oldpiix_init+0x0/0x16 @ 1 initcall oldpiix_init+0x0/0x16 returned 0 after 13 usecs calling radisys_init+0x0/0x16 @ 1 initcall radisys_init+0x0/0x16 returned 0 after 14 usecs calling rdc_init+0x0/0x16 @ 1 initcall rdc_init+0x0/0x16 returned 0 after 14 usecs calling sc1200_init+0x0/0x16 @ 1 initcall sc1200_init+0x0/0x16 returned 0 after 13 usecs calling serverworks_init+0x0/0x16 @ 1 initcall serverworks_init+0x0/0x16 returned 0 after 15 usecs calling via_init+0x0/0x16 @ 1 initcall via_init+0x0/0x16 returned 0 after 15 usecs calling sl82c105_init+0x0/0x16 @ 1 initcall sl82c105_init+0x0/0x16 returned 0 after 14 usecs calling ns87410_init+0x0/0x16 @ 1 initcall ns87410_init+0x0/0x16 returned 0 after 14 usecs calling pata_platform_init+0x0/0xf @ 1 initcall pata_platform_init+0x0/0xf returned 0 after 9 usecs calling rz1000_init+0x0/0x16 @ 1 initcall rz1000_init+0x0/0x16 returned 0 after 15 usecs calling ata_generic_init+0x0/0x16 @ 1 initcall ata_generic_init+0x0/0x16 returned 0 after 15 usecs calling spi_gpio_init+0x0/0x14 @ 1 initcall spi_gpio_init+0x0/0x14 returned -19 after 15 usecs calling tle62x0_init+0x0/0xf @ 1 initcall tle62x0_init+0x0/0xf returned 0 after 9 usecs calling davicom_init+0x0/0x4d @ 1 initcall davicom_init+0x0/0x4d returned 0 after 25 usecs calling qs6612_init+0x0/0xf @ 1 initcall qs6612_init+0x0/0xf returned 0 after 7 usecs calling smsc_init+0x0/0x81 @ 1 initcall smsc_init+0x0/0x81 returned 0 after 38 usecs calling vsc82xx_init+0x0/0x33 @ 1 initcall vsc82xx_init+0x0/0x33 returned 0 after 17 usecs calling realtek_init+0x0/0xf @ 1 initcall realtek_init+0x0/0xf returned 0 after 7 usecs calling et1011c_init+0x0/0xf @ 1 initcall et1011c_init+0x0/0xf returned 0 after 7 usecs calling mdio_gpio_init+0x0/0xf @ 1 initcall mdio_gpio_init+0x0/0xf returned 0 after 9 usecs calling e1000_init_module+0x0/0x82 @ 1 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. initcall e1000_init_module+0x0/0x82 returned 0 after 9957 usecs calling e1000_init_module+0x0/0x3a @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. initcall e1000_init_module+0x0/0x3a returned 0 after 9114 usecs calling igb_init_module+0x0/0x4a @ 1 Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 Copyright (c) 2007-2009 Intel Corporation. initcall igb_init_module+0x0/0x4a returned 0 after 8942 usecs calling igbvf_init_module+0x0/0x66 @ 1 Intel(R) Virtual Function Network Driver - version 1.0.0-k0 Copyright (c) 2009 Intel Corporation. initcall igbvf_init_module+0x0/0x66 returned 0 after 8519 usecs calling ipg_init_module+0x0/0x16 @ 1 initcall ipg_init_module+0x0/0x16 returned 0 after 15 usecs calling t1_init_module+0x0/0x16 @ 1 initcall t1_init_module+0x0/0x16 returned 0 after 14 usecs calling cxgb3_init_module+0x0/0x1b @ 1 initcall cxgb3_init_module+0x0/0x1b returned 0 after 18 usecs calling cxgb4_init_module+0x0/0x50 @ 1 initcall cxgb4_init_module+0x0/0x50 returned 0 after 20 usecs calling vcan_init_module+0x0/0x34 @ 1 vcan: Virtual CAN interface driver initcall vcan_init_module+0x0/0x34 returned 0 after 3066 usecs calling can_dev_init+0x0/0x2a @ 1 CAN device driver interface initcall can_dev_init+0x0/0x2a returned 0 after 2471 usecs calling ems_usb_init+0x0/0x42 @ 1 CPC-USB kernel driver loaded usbcore: registered new interface driver ems_usb initcall ems_usb_init+0x0/0x42 returned 0 after 6818 usecs calling sja1000_init+0x0/0x1f @ 1 sja1000 CAN netdevice driver initcall sja1000_init+0x0/0x1f returned 0 after 2559 usecs calling ems_pci_init+0x0/0x16 @ 1 initcall ems_pci_init+0x0/0x16 returned 0 after 13 usecs calling kvaser_pci_init+0x0/0x16 @ 1 initcall kvaser_pci_init+0x0/0x16 returned 0 after 13 usecs calling mcp251x_can_init+0x0/0xf @ 1 initcall mcp251x_can_init+0x0/0xf returned 0 after 7 usecs calling atl1e_init_module+0x0/0x16 @ 1 initcall atl1e_init_module+0x0/0x16 returned 0 after 13 usecs calling atl1c_init_module+0x0/0x16 @ 1 initcall atl1c_init_module+0x0/0x16 returned 0 after 14 usecs calling enic_init_module+0x0/0x36 @ 1 enic: Cisco VIC Ethernet NIC Driver, ver 1.3.1.1-pp initcall enic_init_module+0x0/0x36 returned 0 after 4521 usecs calling vmxnet3_init_module+0x0/0x36 @ 1 VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI initcall vmxnet3_init_module+0x0/0x36 returned 0 after 5111 usecs calling happy_meal_probe+0x0/0x16 @ 1 initcall happy_meal_probe+0x0/0x16 returned 0 after 13 usecs calling vortex_init+0x0/0xa0 @ 1 initcall vortex_init+0x0/0xa0 returned 0 after 16 usecs calling e100_init_module+0x0/0x5b @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5b returned 0 after 8775 usecs calling tlan_probe+0x0/0xe2 @ 1 ThunderLAN driver v1.15a TLAN: 0 devices installed, PCI: 0 EISA: 0 initcall tlan_probe+0x0/0xe2 returned -19 after 5988 usecs calling smsc9420_init_module+0x0/0x38 @ 1 initcall smsc9420_init_module+0x0/0x38 returned 0 after 14 usecs calling sis900_init_module+0x0/0x16 @ 1 initcall sis900_init_module+0x0/0x16 returned 0 after 16 usecs calling r6040_init+0x0/0x16 @ 1 initcall r6040_init+0x0/0x16 returned 0 after 14 usecs calling yellowfin_init+0x0/0x16 @ 1 initcall yellowfin_init+0x0/0x16 returned 0 after 14 usecs calling acenic_init+0x0/0x16 @ 1 initcall acenic_init+0x0/0x16 returned 0 after 14 usecs calling natsemi_init_mod+0x0/0x16 @ 1 initcall natsemi_init_mod+0x0/0x16 returned 0 after 14 usecs calling fealnx_init+0x0/0x16 @ 1 initcall fealnx_init+0x0/0x16 returned 0 after 14 usecs calling tg3_init+0x0/0x16 @ 1 initcall tg3_init+0x0/0x16 returned 0 after 19 usecs calling bnx2_init+0x0/0x16 @ 1 initcall bnx2_init+0x0/0x16 returned 0 after 15 usecs calling cnic_init+0x0/0x36 @ 1 cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010) initcall cnic_init+0x0/0x36 returned 0 after 5785 usecs calling skge_init_module+0x0/0x16 @ 1 initcall skge_init_module+0x0/0x16 returned 0 after 15 usecs calling ksz884x_init_module+0x0/0x16 @ 1 initcall ksz884x_init_module+0x0/0x16 returned 0 after 14 usecs calling rhine_init+0x0/0x65 @ 1 initcall rhine_init+0x0/0x65 returned 0 after 17 usecs calling velocity_init_module+0x0/0x34 @ 1 initcall velocity_init_module+0x0/0x34 returned 0 after 14 usecs calling sundance_init+0x0/0x16 @ 1 initcall sundance_init+0x0/0x16 returned 0 after 15 usecs calling hamachi_init+0x0/0x16 @ 1 initcall hamachi_init+0x0/0x16 returned 0 after 14 usecs calling net_olddevs_init+0x0/0x84 @ 1 initcall net_olddevs_init+0x0/0x84 returned 0 after 4 usecs calling init_nic+0x0/0x16 @ 1 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr calling 1_async_port_probe+0x0/0x100 @ 78 calling 2_async_port_probe+0x0/0x100 @ 79 async_waiting @ 79 ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 ata1.00: 488397168 sectors, multi 1: LBA48 ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 ata1.00: configured for UDMA/100 async_waiting @ 78 async_continuing @ 78 after 0 usec scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 initcall 1_async_port_probe+0x0/0x100 returned 0 after 290316 usecs calling 3_sd_probe_async+0x0/0x1e0 @ 80 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) async_continuing @ 79 after 305836 usec sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk initcall 3_sd_probe_async+0x0/0x1e0 returned 0 after 108537 usecs ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 initcall init_nic+0x0/0x16 returned 0 after 537717 usecs calling ql3xxx_init_module+0x0/0x16 @ 1 initcall ql3xxx_init_module+0x0/0x16 returned 0 after 28 usecs calling ppp_init+0x0/0xe5 @ 1 PPP generic driver version 2.4.2 initcall ppp_init+0x0/0xe5 returned 0 after 3016 usecs calling ppp_sync_init+0x0/0x34 @ 1 initcall ppp_sync_init+0x0/0x34 returned 0 after 0 usecs calling deflate_init+0x0/0x34 @ 1 PPP Deflate Compression module registered initcall deflate_init+0x0/0x34 returned 0 after 3657 usecs calling ppp_mppe_init+0x0/0x128 @ 1 PPP MPPE Compression module registered initcall ppp_mppe_init+0x0/0x128 returned 0 after 3684 usecs calling slip_init+0x0/0xaa @ 1 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). SLIP linefill/keepalive option. initcall slip_init+0x0/0xaa returned 0 after 10968 usecs calling dummy_init_module+0x0/0x9c @ 1 initcall dummy_init_module+0x0/0x9c returned 0 after 67 usecs calling dfx_init+0x0/0x1b @ 1 initcall dfx_init+0x0/0x1b returned 0 after 23 usecs calling rtl8139_init_module+0x0/0x16 @ 1 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0x80d38000, 00:c0:df:03:68:5d, IRQ 11 initcall rtl8139_init_module+0x0/0x16 returned 0 after 11562 usecs calling tun_init+0x0/0x8d @ 1 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky initcall tun_init+0x0/0x8d returned 0 after 8480 usecs calling veth_init+0x0/0xf @ 1 initcall veth_init+0x0/0xf returned 0 after 0 usecs calling rio_init+0x0/0x16 @ 1 initcall rio_init+0x0/0x16 returned 0 after 20 usecs calling rtl8169_init_module+0x0/0x16 @ 1 initcall rtl8169_init_module+0x0/0x16 returned 0 after 17 usecs calling s2io_starter+0x0/0x16 @ 1 initcall s2io_starter+0x0/0x16 returned 0 after 17 usecs calling myri10ge_init_module+0x0/0x65 @ 1 myri10ge: Version 1.5.2-1.459 initcall myri10ge_init_module+0x0/0x65 returned 0 after 2659 usecs calling mlx4_init+0x0/0xc6 @ 1 initcall mlx4_init+0x0/0xc6 returned 0 after 163 usecs calling mlx4_en_init+0x0/0xf @ 1 initcall mlx4_en_init+0x0/0xf returned 0 after 0 usecs calling enc28j60_init+0x0/0x1e @ 1 initcall enc28j60_init+0x0/0x1e returned 0 after 10 usecs calling ethoc_init+0x0/0xf @ 1 initcall ethoc_init+0x0/0xf returned 0 after 13 usecs calling abyss_init+0x0/0x3f @ 1 initcall abyss_init+0x0/0x3f returned 0 after 18 usecs calling xl_pci_init+0x0/0x16 @ 1 initcall xl_pci_init+0x0/0x16 returned 0 after 16 usecs calling arcnet_init+0x0/0x57 @ 1 arcnet loaded. initcall arcnet_init+0x0/0x57 returned 0 after 1374 usecs calling arcnet_rfc1201_init+0x0/0x6a @ 1 arcnet: RFC1201 "standard" (`a') encapsulation support loaded. initcall arcnet_rfc1201_init+0x0/0x6a returned 0 after 5434 usecs calling arcnet_rfc1051_init+0x0/0x42 @ 1 arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. initcall arcnet_rfc1051_init+0x0/0x42 returned 0 after 6036 usecs calling com90xx_init+0x0/0x29 @ 1 arcnet: COM90xx chipset support S3: No ARCnet cards found. initcall com90xx_init+0x0/0x29 returned -5 after 298299 usecs initcall com90xx_init+0x0/0x29 returned with error code -5 calling com90io_init+0x0/0x488 @ 1 arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) E-mail me if you actually test this driver, please! arc%d: No autoprobe for IO mapped cards; you must specify the base address! initcall com90io_init+0x0/0x488 returned -19 after 16904 usecs calling init_fmvj18x_cs+0x0/0xf @ 1 initcall init_fmvj18x_cs+0x0/0xf returned 0 after 15 usecs calling init_smc91c92_cs+0x0/0xf @ 1 initcall init_smc91c92_cs+0x0/0xf returned 0 after 13 usecs calling init_xirc2ps_cs+0x0/0xf @ 1 initcall init_xirc2ps_cs+0x0/0xf returned 0 after 11 usecs calling init_com20020_cs+0x0/0xf @ 1 initcall init_com20020_cs+0x0/0xf returned 0 after 8 usecs calling init_ibmtr_cs+0x0/0xf @ 1 initcall init_ibmtr_cs+0x0/0xf returned 0 after 10 usecs calling pegasus_init+0x0/0x13b @ 1 pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus initcall pegasus_init+0x0/0x13b returned 0 after 10291 usecs calling usb_rtl8150_init+0x0/0x26 @ 1 rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver usbcore: registered new interface driver rtl8150 initcall usb_rtl8150_init+0x0/0x26 returned 0 after 9705 usecs calling asix_init+0x0/0x16 @ 1 usbcore: registered new interface driver asix initcall asix_init+0x0/0x16 returned 0 after 4008 usecs calling cdc_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_ether initcall cdc_init+0x0/0x16 returned 0 after 4427 usecs calling smsc75xx_init+0x0/0x16 @ 1 usbcore: registered new interface driver smsc75xx initcall smsc75xx_init+0x0/0x16 returned 0 after 4348 usecs calling plusb_init+0x0/0x16 @ 1 usbcore: registered new interface driver plusb initcall plusb_init+0x0/0x16 returned 0 after 4091 usecs calling rndis_init+0x0/0x16 @ 1 usbcore: registered new interface driver rndis_host initcall rndis_init+0x0/0x16 returned 0 after 4524 usecs calling zaurus_init+0x0/0x16 @ 1 usbcore: registered new interface driver zaurus initcall zaurus_init+0x0/0x16 returned 0 after 4177 usecs calling mcs7830_init+0x0/0x16 @ 1 usbcore: registered new interface driver MOSCHIP usb-ethernet driver initcall mcs7830_init+0x0/0x16 returned 0 after 5956 usecs calling usbnet_init+0x0/0x26 @ 1 initcall usbnet_init+0x0/0x26 returned 0 after 3 usecs calling int51x1_init+0x0/0x16 @ 1 usbcore: registered new interface driver int51x1 initcall int51x1_init+0x0/0x16 returned 0 after 4261 usecs calling sierra_net_init+0x0/0x16 @ 1 usbcore: registered new interface driver sierra_net initcall sierra_net_init+0x0/0x16 returned 0 after 4516 usecs calling airo_init_module+0x0/0xea @ 1 airo(): Probing for PCI adapters airo(): Finished probing for PCI adapters initcall airo_init_module+0x0/0xea returned 0 after 6587 usecs calling prism54_module_init+0x0/0x36 @ 1 Loaded prism54 driver, version 1.2 initcall prism54_module_init+0x0/0x36 returned 0 after 3084 usecs calling hostap_init+0x0/0x40 @ 1 initcall hostap_init+0x0/0x40 returned 0 after 4 usecs calling init_prism2_pccard+0x0/0xf @ 1 initcall init_prism2_pccard+0x0/0xf returned 0 after 13 usecs calling init_prism2_plx+0x0/0x16 @ 1 initcall init_prism2_plx+0x0/0x16 returned 0 after 18 usecs calling init_ray_cs+0x0/0xb1 @ 1 initcall init_ray_cs+0x0/0xb1 returned 0 after 16 usecs calling wl3501_init_module+0x0/0xf @ 1 initcall wl3501_init_module+0x0/0xf returned 0 after 8 usecs calling zd1201_init+0x0/0x16 @ 1 usbcore: registered new interface driver zd1201 initcall zd1201_init+0x0/0x16 returned 0 after 4170 usecs calling mkiss_init_driver+0x0/0x40 @ 1 mkiss: AX.25 Multikiss, Hans Albas PE1AYX initcall mkiss_init_driver+0x0/0x40 returned 0 after 3659 usecs calling sixpack_init_driver+0x0/0x40 @ 1 AX.25: 6pack driver, Revision: 0.3.0 initcall sixpack_init_driver+0x0/0x40 returned 0 after 3237 usecs calling yam_init_driver+0x0/0x11e @ 1 YAM driver version 0.8 by F1OAT/F6FBB initcall yam_init_driver+0x0/0x11e returned 0 after 3533 usecs calling bpq_init_driver+0x0/0x5d @ 1 AX.25: bpqether driver version 004 initcall bpq_init_driver+0x0/0x5d returned 0 after 3072 usecs calling init_baycomserfdx+0x0/0x10d @ 1 baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_fdx: version 0.10 compiled 18:18:20 Sep 3 2010 initcall init_baycomserfdx+0x0/0x10d returned 0 after 10329 usecs calling hdlcdrv_init_driver+0x0/0x23 @ 1 hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA hdlcdrv: version 0.8 compiled 18:18:20 Sep 3 2010 initcall hdlcdrv_init_driver+0x0/0x23 returned 0 after 8757 usecs calling init_netconsole+0x0/0x206 @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x206 returned 0 after 5473 usecs calling caif_ser_init+0x0/0x4f @ 1 initcall caif_ser_init+0x0/0x4f returned 0 after 5 usecs calling zatm_init_module+0x0/0x16 @ 1 initcall zatm_init_module+0x0/0x16 returned 0 after 21 usecs calling uPD98402_module_init+0x0/0x7 @ 1 initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs calling amb_module_init+0x0/0x131 @ 1 Madge ATM Ambassador driver version 1.2.4 initcall amb_module_init+0x0/0x131 returned 0 after 3676 usecs calling hrz_module_init+0x0/0xd4 @ 1 Madge ATM Horizon [Ultra] driver version 1.2.1 hrz: debug bitmap is 0 initcall hrz_module_init+0x0/0xd4 returned 0 after 6150 usecs calling ia_module_init+0x0/0x4c @ 1 initcall ia_module_init+0x0/0x4c returned 0 after 17 usecs calling idt77252_init+0x0/0x36 @ 1 idt77252_init: at 4202c290 initcall idt77252_init+0x0/0x36 returned 0 after 2407 usecs calling solos_pci_init+0x0/0x2e @ 1 Solos PCI Driver Version 0.07 initcall solos_pci_init+0x0/0x2e returned 0 after 2658 usecs calling atmtcp_init+0x0/0x11 @ 1 initcall atmtcp_init+0x0/0x11 returned 0 after 0 usecs calling i2o_iop_init+0x0/0x46 @ 1 I2O subsystem v1.325 i2o: max drivers = 8 ata2.01: configured for UDMA/33 initcall i2o_iop_init+0x0/0x46 returned 0 after 6896 usecs calling i2o_scsi_init+0x0/0x3f @ 1 I2O SCSI Peripheral OSM v1.316 initcall i2o_scsi_init+0x0/0x3f returned 0 after 2739 usecs calling fusion_init+0x0/0x116 @ 1 Fusion MPT base driver 3.04.15 Copyright (c) 1999-2008 LSI Corporation initcall fusion_init+0x0/0x116 returned 0 after 6217 usecs calling mptfc_init+0x0/0xd7 @ 1 Fusion MPT FC Host driver 3.04.15 initcall mptfc_init+0x0/0xd7 returned 0 after 3005 usecs calling mptsas_init+0x0/0xf0 @ 1 Fusion MPT SAS Host driver 3.04.15 initcall mptsas_init+0x0/0xf0 returned 0 after 3085 usecs calling mptctl_init+0x0/0x143 @ 1 Fusion MPT misc device (ioctl) driver 3.04.15 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) initcall mptctl_init+0x0/0x143 returned 0 after 11938 usecs calling pcilynx_init+0x0/0x35 @ 1 initcall pcilynx_init+0x0/0x35 returned 0 after 23 usecs calling ohci1394_init+0x0/0x16 @ 1 initcall ohci1394_init+0x0/0x16 returned 0 after 18 usecs calling video1394_init_module+0x0/0xad @ 1 video1394: Installed video1394 module initcall video1394_init_module+0x0/0xad returned 0 after 3332 usecs calling sbp2_module_init+0x0/0x80 @ 1 initcall sbp2_module_init+0x0/0x80 returned 0 after 8 usecs calling dv1394_init_module+0x0/0x8b @ 1 initcall dv1394_init_module+0x0/0x8b returned 0 after 8 usecs calling uio_init+0x0/0x7 @ 1 initcall uio_init+0x0/0x7 returned 0 after 0 usecs calling hilscher_init_module+0x0/0x16 @ 1 initcall hilscher_init_module+0x0/0x16 returned 0 after 18 usecs calling uio_pdrv_init+0x0/0xf @ 1 initcall uio_pdrv_init+0x0/0xf returned 0 after 12 usecs calling uio_pdrv_genirq_init+0x0/0xf @ 1 initcall uio_pdrv_genirq_init+0x0/0xf returned 0 after 9 usecs calling aectc_init+0x0/0x16 @ 1 initcall aectc_init+0x0/0x16 returned 0 after 22 usecs calling netx_init_module+0x0/0x16 @ 1 initcall netx_init_module+0x0/0x16 returned 0 after 18 usecs calling nonstatic_sysfs_init+0x0/0xf @ 1 initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 0 usecs calling pd6729_module_init+0x0/0x20 @ 1 initcall pd6729_module_init+0x0/0x20 returned 0 after 18 usecs calling uwb_subsys_init+0x0/0x4a @ 1 initcall uwb_subsys_init+0x0/0x4a returned 0 after 17 usecs calling hwarc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver hwa-rc initcall hwarc_driver_init+0x0/0x16 returned 0 after 4179 usecs calling i1480_dfu_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver i1480-dfu-usb initcall i1480_dfu_driver_init+0x0/0x16 returned 0 after 4777 usecs calling i1480_est_init+0x0/0x96 @ 1 initcall i1480_est_init+0x0/0x96 returned 0 after 0 usecs calling mon_init+0x0/0xe0 @ 1 initcall mon_init+0x0/0xe0 returned 0 after 65 usecs calling ehci_hcd_init+0x0/0x6c @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; please try using pci=biosirq ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 initcall ehci_hcd_init+0x0/0x6c returned 0 after 23610 usecs calling isp1362_init+0x0/0x3f @ 1 driver isp1362-hcd, 2005-04-04 initcall isp1362_init+0x0/0x3f returned 0 after 2739 usecs calling ohci_hcd_mod_init+0x0/0x70 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 initcall ohci_hcd_mod_init+0x0/0x70 returned 0 after 23263 usecs calling uhci_hcd_init+0x0/0xb3 @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xb3 returned 0 after 4958 usecs calling xhci_hcd_init+0x0/0x29 @ 1 initcall xhci_hcd_init+0x0/0x29 returned 0 after 18 usecs calling u132_hcd_init+0x0/0xb0 @ 1 driver u132_hcd built at 18:18:37 on Sep 3 2010 initcall u132_hcd_init+0x0/0xb0 returned 0 after 4334 usecs calling isp1760_init+0x0/0x44 @ 1 initcall isp1760_init+0x0/0x44 returned 0 after 31 usecs calling c67x00_init+0x0/0xf @ 1 initcall c67x00_init+0x0/0xf returned 0 after 12 usecs calling wusbcore_init+0x0/0x78 @ 1 initcall wusbcore_init+0x0/0x78 returned 0 after 55 usecs calling cbaf_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver wusb-cbaf initcall cbaf_driver_init+0x0/0x16 returned 0 after 4440 usecs calling acm_init+0x0/0xce @ 1 usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0xce returned 0 after 11327 usecs calling usblp_init+0x0/0x16 @ 1 usbcore: registered new interface driver usblp initcall usblp_init+0x0/0x16 returned 0 after 4100 usecs calling usbtmc_init+0x0/0x31 @ 1 usbcore: registered new interface driver usbtmc initcall usbtmc_init+0x0/0x31 returned 0 after 4174 usecs calling usb_mdc800_init+0x0/0x280 @ 1 usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera initcall usb_mdc800_init+0x0/0x280 returned 0 after 10374 usecs calling adu_init+0x0/0xa0 @ 1 usbcore: registered new interface driver adutux adutux adutux (see www.ontrak.net) v0.0.13 adutux is an experimental driver. Use at your own risk initcall adu_init+0x0/0xa0 returned 0 after 12679 usecs calling cypress_init+0x0/0x36 @ 1 usbcore: registered new interface driver cypress_cy7c63 initcall cypress_init+0x0/0x36 returned 0 after 4849 usecs calling emi26_init+0x0/0x16 @ 1 usbcore: registered new interface driver emi26 - firmware loader initcall emi26_init+0x0/0x16 returned 0 after 5623 usecs calling ftdi_elan_init+0x0/0x16e @ 1 driver ftdi-elan built at 18:18:35 on Sep 3 2010 async_waiting @ 79 async_continuing @ 79 after 0 usec usbcore: registered new interface driver ftdi-elan initcall ftdi_elan_init+0x0/0x16e returned 0 after 13717 usecs calling usb_idmouse_init+0x0/0x42 @ 1 idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver usbcore: registered new interface driver idmouse initcall usb_idmouse_init+0x0/0x42 returned 0 after 8942 usecs calling iowarrior_init+0x0/0x16 @ 1 usbcore: registered new interface driver iowarrior initcall iowarrior_init+0x0/0x16 returned 0 after 4428 usecs calling usb_lcd_init+0x0/0x36 @ 1 usbcore: registered new interface driver usblcd initcall usb_lcd_init+0x0/0x36 returned 0 after 4180 usecs calling usbtest_init+0x0/0x16 @ 1 usbcore: registered new interface driver usbtest initcall usbtest_init+0x0/0x16 returned 0 after 4268 usecs calling usb_sevseg_init+0x0/0x36 @ 1 usbcore: registered new interface driver usbsevseg initcall usb_sevseg_init+0x0/0x36 returned 0 after 4429 usecs calling r8a66597_udc_init+0x0/0x14 @ 1 initcall r8a66597_udc_init+0x0/0x14 returned -19 after 18 usecs calling init+0x0/0xf @ 1 initcall init+0x0/0xf returned -19 after 0 usecs calling i8042_init+0x0/0xcb @ 1 scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 scsi 1:0:1:0: Attached scsi generic sg1 type 5 initcall 2_async_port_probe+0x0/0x100 returned 0 after 2212221 usecs serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0xcb returned 0 after 27079 usecs calling serport_init+0x0/0x2f @ 1 initcall serport_init+0x0/0x2f returned 0 after 0 usecs calling pcips2_init+0x0/0x16 @ 1 initcall pcips2_init+0x0/0x16 returned 0 after 28 usecs calling altera_ps2_init+0x0/0xf @ 1 initcall altera_ps2_init+0x0/0xf returned 0 after 11 usecs calling emu_init+0x0/0x16 @ 1 initcall emu_init+0x0/0x16 returned 0 after 20 usecs calling fm801_gp_init+0x0/0x16 @ 1 initcall fm801_gp_init+0x0/0x16 returned 0 after 21 usecs calling l4_init+0x0/0x325 @ 1 initcall l4_init+0x0/0x325 returned -19 after 9 usecs calling ns558_init+0x0/0x331 @ 1 initcall ns558_init+0x0/0x331 returned -19 after 8745 usecs calling mousedev_init+0x0/0x55 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x55 returned 0 after 3878 usecs calling joydev_init+0x0/0xf @ 1 initcall joydev_init+0x0/0xf returned 0 after 0 usecs calling atkbd_init+0x0/0x20 @ 1 initcall atkbd_init+0x0/0x20 returned 0 after 16 usecs calling lkkbd_init+0x0/0x16 @ 1 initcall lkkbd_init+0x0/0x16 returned 0 after 8 usecs calling lm8323_init+0x0/0x11 @ 1 i2c-core: driver [lm8323] registered initcall lm8323_init+0x0/0x11 returned 0 after 3255 usecs calling matrix_keypad_init+0x0/0xf @ 1 initcall matrix_keypad_init+0x0/0xf returned 0 after 11 usecs calling nkbd_init+0x0/0x16 @ 1 initcall nkbd_init+0x0/0x16 returned 0 after 8 usecs calling opencores_kbd_init+0x0/0xf @ 1 initcall opencores_kbd_init+0x0/0xf returned 0 after 9 usecs calling skbd_init+0x0/0x16 @ 1 initcall skbd_init+0x0/0x16 returned 0 after 8 usecs calling sunkbd_init+0x0/0x16 @ 1 initcall sunkbd_init+0x0/0x16 returned 0 after 9 usecs calling a3d_init+0x0/0x16 @ 1 initcall a3d_init+0x0/0x16 returned 0 after 10 usecs calling adi_init+0x0/0x16 @ 1 initcall adi_init+0x0/0x16 returned 0 after 8 usecs calling analog_init+0x0/0xdb @ 1 initcall analog_init+0x0/0xdb returned 0 after 8 usecs calling grip_init+0x0/0x16 @ 1 initcall grip_init+0x0/0x16 returned 0 after 8 usecs calling joydump_init+0x0/0x16 @ 1 initcall joydump_init+0x0/0x16 returned 0 after 8 usecs calling sw_init+0x0/0x16 @ 1 initcall sw_init+0x0/0x16 returned 0 after 10 usecs calling spaceball_init+0x0/0x16 @ 1 initcall spaceball_init+0x0/0x16 returned 0 after 11 usecs calling spaceorb_init+0x0/0x16 @ 1 initcall spaceorb_init+0x0/0x16 returned 0 after 9 usecs calling stinger_init+0x0/0x16 @ 1 initcall stinger_init+0x0/0x16 returned 0 after 9 usecs calling tmdc_init+0x0/0x16 @ 1 initcall tmdc_init+0x0/0x16 returned 0 after 8 usecs calling twidjoy_init+0x0/0x16 @ 1 initcall twidjoy_init+0x0/0x16 returned 0 after 8 usecs calling usb_xpad_init+0x0/0x31 @ 1 usbcore: registered new interface driver xpad xpad: X-Box pad driver initcall usb_xpad_init+0x0/0x31 returned 0 after 6067 usecs calling usb_acecad_init+0x0/0x31 @ 1 usbcore: registered new interface driver usb_acecad acecad: v3.2:USB Acecad Flair tablet driver initcall usb_acecad_init+0x0/0x31 returned 0 after 8344 usecs calling aiptek_init+0x0/0x3d @ 1 usbcore: registered new interface driver aiptek aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen initcall aiptek_init+0x0/0x3d returned 0 after 16582 usecs calling gtco_init+0x0/0x4c @ 1 usbcore: registered new interface driver gtco GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x4c returned 0 after 6910 usecs calling kbtab_init+0x0/0x31 @ 1 usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver initcall kbtab_init+0x0/0x31 returned 0 after 8429 usecs calling i2c_smbus_init+0x0/0x11 @ 1 i2c-core: driver [smbus_alert] registered initcall i2c_smbus_init+0x0/0x11 returned 0 after 3664 usecs calling i2c_ali1535_init+0x0/0x16 @ 1 initcall i2c_ali1535_init+0x0/0x16 returned 0 after 22 usecs calling ali1563_init+0x0/0x16 @ 1 initcall ali1563_init+0x0/0x16 returned 0 after 19 usecs calling amd756_init+0x0/0x16 @ 1 initcall amd756_init+0x0/0x16 returned 0 after 20 usecs calling i2c_sch_init+0x0/0xf @ 1 initcall i2c_sch_init+0x0/0xf returned 0 after 10 usecs calling i2c_sis5595_init+0x0/0x16 @ 1 initcall i2c_sis5595_init+0x0/0x16 returned 0 after 26 usecs calling i2c_sis630_init+0x0/0x16 @ 1 initcall i2c_sis630_init+0x0/0x16 returned 0 after 20 usecs calling i2c_sis96x_init+0x0/0x16 @ 1 initcall i2c_sis96x_init+0x0/0x16 returned 0 after 19 usecs calling i2c_pca_pf_init+0x0/0xf @ 1 initcall i2c_pca_pf_init+0x0/0xf returned 0 after 10 usecs calling i2c_adap_simtec_init+0x0/0xf @ 1 initcall i2c_adap_simtec_init+0x0/0xf returned 0 after 9 usecs calling xiic_i2c_init+0x0/0xf @ 1 initcall xiic_i2c_init+0x0/0xf returned 0 after 9 usecs calling taos_init+0x0/0x16 @ 1 initcall taos_init+0x0/0x16 returned 0 after 8 usecs calling usb_i2c_tiny_usb_init+0x0/0x16 @ 1 usbcore: registered new interface driver i2c-tiny-usb initcall usb_i2c_tiny_usb_init+0x0/0x16 returned 0 after 4681 usecs calling scx200_acb_init+0x0/0x201 @ 1 scx200_acb: NatSemi SCx200 ACCESS.bus Driver initcall scx200_acb_init+0x0/0x201 returned -19 after 3926 usecs calling pps_tty_init+0x0/0x97 @ 1 PPS line discipline registered initcall pps_tty_init+0x0/0x97 returned 0 after 2730 usecs calling w1_init+0x0/0x98 @ 1 Driver for 1-wire Dallas network protocol. initcall w1_init+0x0/0x98 returned 0 after 3776 usecs calling ds_init+0x0/0x40 @ 1 usbcore: registered new interface driver DS9490R initcall ds_init+0x0/0x40 returned 0 after 4261 usecs calling w1_gpio_init+0x0/0x14 @ 1 initcall w1_gpio_init+0x0/0x14 returned -19 after 15 usecs calling w1_therm_init+0x0/0x29 @ 1 initcall w1_therm_init+0x0/0x29 returned 0 after 0 usecs calling w1_smem_init+0x0/0x33 @ 1 initcall w1_smem_init+0x0/0x33 returned 0 after 0 usecs calling w1_f2d_init+0x0/0xf @ 1 initcall w1_f2d_init+0x0/0xf returned 0 after 0 usecs calling w1_ds2760_init+0x0/0x29 @ 1 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko initcall w1_ds2760_init+0x0/0x29 returned 0 after 7299 usecs calling w1_bq27000_init+0x0/0x1d @ 1 initcall w1_bq27000_init+0x0/0x1d returned -17 after 0 usecs initcall w1_bq27000_init+0x0/0x1d returned with error code -17 calling pda_power_init+0x0/0xf @ 1 initcall pda_power_init+0x0/0xf returned 0 after 10 usecs calling wm831x_backup_init+0x0/0xf @ 1 initcall wm831x_backup_init+0x0/0xf returned 0 after 10 usecs calling wm8350_power_init+0x0/0xf @ 1 initcall wm8350_power_init+0x0/0xf returned 0 after 10 usecs calling ds2760_battery_init+0x0/0xf @ 1 initcall ds2760_battery_init+0x0/0xf returned 0 after 10 usecs calling bq27x00_battery_init+0x0/0x2c @ 1 i2c-core: driver [bq27x00-battery] registered initcall bq27x00_battery_init+0x0/0x2c returned 0 after 4007 usecs calling da903x_battery_init+0x0/0x20 @ 1 initcall da903x_battery_init+0x0/0x20 returned 0 after 12 usecs calling pcf50633_mbc_init+0x0/0xf @ 1 initcall pcf50633_mbc_init+0x0/0xf returned 0 after 10 usecs calling asb100_init+0x0/0x11 @ 1 i2c-core: driver [asb100] registered initcall asb100_init+0x0/0x11 returned 0 after 3239 usecs calling sensors_w83792d_init+0x0/0x11 @ 1 i2c-core: driver [w83792d] registered initcall sensors_w83792d_init+0x0/0x11 returned 0 after 3329 usecs calling sensors_w83793_init+0x0/0x11 @ 1 i2c-core: driver [w83793] registered initcall sensors_w83793_init+0x0/0x11 returned 0 after 3247 usecs calling sensors_w83781d_init+0x0/0x11 @ 1 i2c-core: driver [w83781d] registered initcall sensors_w83781d_init+0x0/0x11 returned 0 after 3329 usecs calling abituguru3_init+0x0/0x214 @ 1 initcall abituguru3_init+0x0/0x214 returned -19 after 0 usecs calling ad7414_init+0x0/0x11 @ 1 i2c-core: driver [ad7414] registered initcall ad7414_init+0x0/0x11 returned 0 after 3241 usecs calling init_adcxx+0x0/0xf @ 1 initcall init_adcxx+0x0/0xf returned 0 after 9 usecs calling sensors_adm1021_init+0x0/0x11 @ 1 i2c-core: driver [adm1021] registered initcall sensors_adm1021_init+0x0/0x11 returned 0 after 3326 usecs calling sensors_adm1025_init+0x0/0x11 @ 1 i2c-core: driver [adm1025] registered initcall sensors_adm1025_init+0x0/0x11 returned 0 after 3338 usecs calling sensors_adm1029_init+0x0/0x11 @ 1 i2c-core: driver [adm1029] registered initcall sensors_adm1029_init+0x0/0x11 returned 0 after 3329 usecs calling sensors_adm9240_init+0x0/0x11 @ 1 i2c-core: driver [adm9240] registered initcall sensors_adm9240_init+0x0/0x11 returned 0 after 3333 usecs calling ads7871_init+0x0/0xf @ 1 initcall ads7871_init+0x0/0xf returned 0 after 7 usecs calling sensors_adt7411_init+0x0/0x11 @ 1 i2c-core: driver [adt7411] registered initcall sensors_adt7411_init+0x0/0x11 returned 0 after 3326 usecs calling adt7462_init+0x0/0x11 @ 1 i2c-core: driver [adt7462] registered initcall adt7462_init+0x0/0x11 returned 0 after 3329 usecs calling adt7470_init+0x0/0x11 @ 1 i2c-core: driver [adt7470] registered initcall adt7470_init+0x0/0x11 returned 0 after 3331 usecs calling applesmc_init+0x0/0x4ac @ 1 applesmc: supported laptop not found! applesmc: driver init failed (ret=-19)! initcall applesmc_init+0x0/0x4ac returned -19 after 6817 usecs calling atxp1_init+0x0/0x11 @ 1 i2c-core: driver [atxp1] registered initcall atxp1_init+0x0/0x11 returned 0 after 3155 usecs calling ds1621_init+0x0/0x11 @ 1 i2c-core: driver [ds1621] registered initcall ds1621_init+0x0/0x11 returned 0 after 3246 usecs calling sensor_emc1403_init+0x0/0x11 @ 1 i2c-core: driver [emc1403] registered initcall sensor_emc1403_init+0x0/0x11 returned 0 after 3331 usecs calling f71805f_init+0x0/0x126 @ 1 initcall f71805f_init+0x0/0x126 returned -19 after 23 usecs calling i5k_amb_init+0x0/0x52 @ 1 initcall i5k_amb_init+0x0/0x52 returned 0 after 46 usecs calling k10temp_init+0x0/0x16 @ 1 initcall k10temp_init+0x0/0x16 returned 0 after 22 usecs calling lis302dl_init+0x0/0xf @ 1 initcall lis302dl_init+0x0/0xf returned 0 after 8 usecs calling lis3lv02d_init+0x0/0x11 @ 1 i2c-core: driver [lis3lv02d_i2c] registered initcall lis3lv02d_init+0x0/0x11 returned 0 after 3834 usecs calling sensors_lm63_init+0x0/0x11 @ 1 i2c-core: driver [lm63] registered initcall sensors_lm63_init+0x0/0x11 returned 0 after 3077 usecs calling init_lm70+0x0/0xf @ 1 initcall init_lm70+0x0/0xf returned 0 after 7 usecs calling sensors_lm75_init+0x0/0x11 @ 1 i2c-core: driver [lm75] registered initcall sensors_lm75_init+0x0/0x11 returned 0 after 3078 usecs calling sensors_lm77_init+0x0/0x11 @ 1 i2c-core: driver [lm77] registered initcall sensors_lm77_init+0x0/0x11 returned 0 after 3074 usecs calling sm_lm78_init+0x0/0x355 @ 1 i2c-core: driver [lm78] registered initcall sm_lm78_init+0x0/0x355 returned 0 after 3093 usecs calling sensors_lm80_init+0x0/0x11 @ 1 i2c-core: driver [lm80] registered initcall sensors_lm80_init+0x0/0x11 returned 0 after 3072 usecs calling ltc4215_init+0x0/0x11 @ 1 i2c-core: driver [ltc4215] registered initcall ltc4215_init+0x0/0x11 returned 0 after 3332 usecs calling ltc4245_init+0x0/0x11 @ 1 i2c-core: driver [ltc4245] registered initcall ltc4245_init+0x0/0x11 returned 0 after 3330 usecs calling max1111_init+0x0/0xf @ 1 initcall max1111_init+0x0/0xf returned 0 after 8 usecs calling sensors_max6650_init+0x0/0x11 @ 1 i2c-core: driver [max6650] registered initcall sensors_max6650_init+0x0/0x11 returned 0 after 3331 usecs calling sm_sis5595_init+0x0/0x16 @ 1 initcall sm_sis5595_init+0x0/0x16 returned 0 after 20 usecs calling smsc47b397_init+0x0/0x164 @ 1 initcall smsc47b397_init+0x0/0x164 returned -19 after 6 usecs calling sm_smsc47m1_init+0x0/0x253 @ 1 initcall sm_smsc47m1_init+0x0/0x253 returned -19 after 6 usecs calling amc6821_init+0x0/0x11 @ 1 i2c-core: driver [amc6821] registered initcall amc6821_init+0x0/0x11 returned 0 after 3331 usecs calling tmp401_init+0x0/0x11 @ 1 i2c-core: driver [tmp401] registered initcall tmp401_init+0x0/0x11 returned 0 after 3243 usecs calling tmp421_init+0x0/0x11 @ 1 i2c-core: driver [tmp421] registered initcall tmp421_init+0x0/0x11 returned 0 after 3245 usecs calling via_cputemp_init+0x0/0x1a6 @ 1 via_cputemp: Not a VIA CPU initcall via_cputemp_init+0x0/0x1a6 returned -19 after 2386 usecs calling sm_vt8231_init+0x0/0x16 @ 1 initcall sm_vt8231_init+0x0/0x16 returned 0 after 20 usecs calling wm831x_hwmon_init+0x0/0xf @ 1 initcall wm831x_hwmon_init+0x0/0xf returned 0 after 11 usecs calling wm8350_hwmon_init+0x0/0xf @ 1 initcall wm8350_hwmon_init+0x0/0xf returned 0 after 13 usecs calling raid0_init+0x0/0xf @ 1 md: raid0 personality registered for level 0 initcall raid0_init+0x0/0xf returned 0 after 3911 usecs calling raid_init+0x0/0xf @ 1 md: raid1 personality registered for level 1 initcall raid_init+0x0/0xf returned 0 after 3910 usecs calling raid_init+0x0/0xf @ 1 md: raid10 personality registered for level 10 initcall raid_init+0x0/0xf returned 0 after 4079 usecs calling hci_uart_init+0x0/0xcc @ 1 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized initcall hci_uart_init+0x0/0xcc returned 0 after 10044 usecs calling bpa10x_init+0x0/0x2e @ 1 Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x initcall bpa10x_init+0x0/0x2e returned 0 after 8683 usecs calling init_btuart_cs+0x0/0xf @ 1 initcall init_btuart_cs+0x0/0xf returned 0 after 10 usecs calling btsdio_init+0x0/0x27 @ 1 Bluetooth: Generic Bluetooth SDIO driver ver 0.1 initcall btsdio_init+0x0/0x27 returned 0 after 4259 usecs calling isdn_init+0x0/0x2a8 @ 1 ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2 initcall isdn_init+0x0/0x2a8 returned 0 after 5533 usecs calling divert_init+0x0/0x63 @ 1 dss1_divert module successfully installed initcall divert_init+0x0/0x63 returned 0 after 3669 usecs calling init_ladder+0x0/0xf @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0xf returned 0 after 2729 usecs calling init_menu+0x0/0xf @ 1 cpuidle: using governor menu initcall init_menu+0x0/0xf returned 0 after 2564 usecs calling mmc_test_init+0x0/0xf @ 1 initcall mmc_test_init+0x0/0xf returned 0 after 9 usecs calling wbsd_drv_init+0x0/0x7c @ 1 wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman initcall wbsd_drv_init+0x0/0x7c returned 0 after 7493 usecs calling sdricoh_drv_init+0x0/0xf @ 1 initcall sdricoh_drv_init+0x0/0xf returned 0 after 10 usecs calling via_sd_drv_init+0x0/0x26 @ 1 via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc. initcall via_sd_drv_init+0x0/0x26 returned 0 after 6307 usecs calling pca9532_init+0x0/0x11 @ 1 i2c-core: driver [pca9532] registered initcall pca9532_init+0x0/0x11 returned 0 after 3340 usecs calling lp3944_module_init+0x0/0x11 @ 1 i2c-core: driver [lp3944] registered initcall lp3944_module_init+0x0/0x11 returned 0 after 3245 usecs calling clevo_mail_led_init+0x0/0x87 @ 1 initcall clevo_mail_led_init+0x0/0x87 returned -19 after 2 usecs calling pca955x_leds_init+0x0/0x11 @ 1 i2c-core: driver [leds-pca955x] registered initcall pca955x_leds_init+0x0/0x11 returned 0 after 3751 usecs calling da903x_led_init+0x0/0xf @ 1 initcall da903x_led_init+0x0/0xf returned 0 after 11 usecs calling wm831x_status_init+0x0/0x14 @ 1 initcall wm831x_status_init+0x0/0x14 returned 0 after 11 usecs calling wm8350_led_init+0x0/0x14 @ 1 initcall wm8350_led_init+0x0/0x14 returned 0 after 11 usecs calling regulator_led_init+0x0/0xf @ 1 initcall regulator_led_init+0x0/0xf returned 0 after 10 usecs calling lt3593_led_init+0x0/0xf @ 1 initcall lt3593_led_init+0x0/0xf returned 0 after 10 usecs calling mc13783_led_init+0x0/0xf @ 1 initcall mc13783_led_init+0x0/0xf returned 0 after 10 usecs calling heartbeat_trig_init+0x0/0xf @ 1 initcall heartbeat_trig_init+0x0/0xf returned 0 after 0 usecs calling bl_trig_init+0x0/0xf @ 1 initcall bl_trig_init+0x0/0xf returned 0 after 0 usecs calling ib_core_init+0x0/0x3f @ 1 initcall ib_core_init+0x0/0x3f returned 0 after 11 usecs calling ib_mad_init_module+0x0/0xcb @ 1 initcall ib_mad_init_module+0x0/0xcb returned 0 after 5 usecs calling ib_sa_init+0x0/0x5c @ 1 initcall ib_sa_init+0x0/0x5c returned 0 after 91 usecs calling ib_cm_init+0x0/0xe9 @ 1 initcall ib_cm_init+0x0/0xe9 returned 0 after 29 usecs calling iw_cm_init+0x0/0x3e @ 1 initcall iw_cm_init+0x0/0x3e returned 0 after 14 usecs calling addr_init+0x0/0x4d @ 1 initcall addr_init+0x0/0x4d returned 0 after 14 usecs calling cma_init+0x0/0x9d @ 1 initcall cma_init+0x0/0x9d returned 0 after 16 usecs calling ib_uverbs_init+0x0/0xb9 @ 1 initcall ib_uverbs_init+0x0/0xb9 returned 0 after 10 usecs calling ib_ucm_init+0x0/0x93 @ 1 initcall ib_ucm_init+0x0/0x93 returned 0 after 0 usecs calling ucma_init+0x0/0x49 @ 1 initcall ucma_init+0x0/0x49 returned 0 after 139 usecs calling mthca_init+0x0/0x161 @ 1 initcall mthca_init+0x0/0x161 returned 0 after 49 usecs calling mlx4_ib_init+0x0/0xf @ 1 initcall mlx4_ib_init+0x0/0xf returned 0 after 0 usecs calling nes_init_module+0x0/0x105 @ 1 initcall nes_init_module+0x0/0x105 returned 0 after 52 usecs calling ipoib_init_module+0x0/0xf1 @ 1 input: AT Translated Set 2 keyboard as /class/input/input0 initcall ipoib_init_module+0x0/0xf1 returned 0 after 5265 usecs calling srp_init_module+0x0/0xd3 @ 1 initcall srp_init_module+0x0/0xd3 returned 0 after 13 usecs calling dcdrbu_init+0x0/0x106 @ 1 initcall dcdrbu_init+0x0/0x106 returned 0 after 30 usecs calling ibft_init+0x0/0x53a @ 1 No iBFT detected. initcall ibft_init+0x0/0x53a returned 0 after 1625 usecs calling ioat_init_module+0x0/0x7c @ 1 ioatdma: Intel(R) QuickData Technology Driver 4.00 initcall ioat_init_module+0x0/0x7c returned 0 after 4450 usecs calling fake_init+0x0/0x2e @ 1 ieee802154hardmac ieee802154hardmac: Added ieee802154 HardMAC hardware initcall fake_init+0x0/0x2e returned 0 after 6269 usecs calling oss_init+0x0/0x158 @ 1 initcall oss_init+0x0/0x158 returned 0 after 204 usecs calling do_init_aedsp16+0x0/0xb3d @ 1 Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 aedsp16: I/O, IRQ and DMA are mandatory initcall do_init_aedsp16+0x0/0xb3d returned -22 after 9689 usecs initcall do_init_aedsp16+0x0/0xb3d returned with error code -22 calling init_pss+0x0/0x6b0 @ 1 pss: mss_io, mss_dma, mss_irq and pss_io must be set. initcall init_pss+0x0/0x6b0 returned -22 after 4670 usecs initcall init_pss+0x0/0x6b0 returned with error code -22 calling init_ad1848+0x0/0x14f @ 1 ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 initcall init_ad1848+0x0/0x14f returned 0 after 6112 usecs calling init_mpu401+0x0/0x8c @ 1 initcall init_mpu401+0x0/0x8c returned 0 after 0 usecs calling init_pas2+0x0/0x47c @ 1 Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 I/O, IRQ, DMA and type are mandatory initcall init_pas2+0x0/0x47c returned -22 after 9274 usecs initcall init_pas2+0x0/0x47c returned with error code -22 calling sb_init+0x0/0x2cc @ 1 sb: Init: Starting Probe... sb: Error: At least io, irq, and dma must be set for legacy cards. sb: Init: Done initcall sb_init+0x0/0x2cc returned -19 after 9621 usecs calling init_uart401+0x0/0x4e @ 1 initcall init_uart401+0x0/0x4e returned 0 after 0 usecs calling init_uart6850+0x0/0x176 @ 1 uart6850: irq and io must be set. initcall init_uart6850+0x0/0x176 returned -22 after 2982 usecs initcall init_uart6850+0x0/0x176 returned with error code -22 calling init_vmidi+0x0/0x2c4 @ 1 MIDI Loopback device driver initcall init_vmidi+0x0/0x2c4 returned 0 after 2573 usecs calling flow_cache_init_global+0x0/0x113 @ 1 initcall flow_cache_init_global+0x0/0x113 returned 0 after 10 usecs calling pg_init+0x0/0x28e @ 1 pktgen 2.73: Packet Generator for packet performance testing. initcall pg_init+0x0/0x28e returned 0 after 5867 usecs calling llc_init+0x0/0x1b @ 1 initcall llc_init+0x0/0x1b returned 0 after 0 usecs calling llc2_init+0x0/0xbb @ 1 NET: Registered protocol family 26 initcall llc2_init+0x0/0xbb returned 0 after 3084 usecs calling snap_init+0x0/0x36 @ 1 initcall snap_init+0x0/0x36 returned 0 after 1 usecs calling rif_init+0x0/0x71 @ 1 initcall rif_init+0x0/0x71 returned 0 after 3 usecs calling blackhole_module_init+0x0/0xf @ 1 initcall blackhole_module_init+0x0/0xf returned 0 after 0 usecs calling police_init_module+0x0/0xf @ 1 initcall police_init_module+0x0/0xf returned 0 after 0 usecs calling mirred_init_module+0x0/0x1f @ 1 Mirror/redirect action on initcall mirred_init_module+0x0/0x1f returned 0 after 2300 usecs calling ipt_init_module+0x0/0xf @ 1 initcall ipt_init_module+0x0/0xf returned 0 after 0 usecs calling nat_init_module+0x0/0xf @ 1 initcall nat_init_module+0x0/0xf returned 0 after 0 usecs calling simp_init_module+0x0/0x2a @ 1 Simple TC action Loaded initcall simp_init_module+0x0/0x2a returned 0 after 2133 usecs calling skbedit_init_module+0x0/0xf @ 1 initcall skbedit_init_module+0x0/0xf returned 0 after 0 usecs calling cbq_module_init+0x0/0xf @ 1 initcall cbq_module_init+0x0/0xf returned 0 after 0 usecs calling gred_module_init+0x0/0xf @ 1 initcall gred_module_init+0x0/0xf returned 0 after 0 usecs calling tbf_module_init+0x0/0xf @ 1 initcall tbf_module_init+0x0/0xf returned 0 after 0 usecs calling teql_init+0x0/0xd5 @ 1 initcall teql_init+0x0/0xd5 returned 0 after 70 usecs calling prio_module_init+0x0/0xf @ 1 initcall prio_module_init+0x0/0xf returned 0 after 0 usecs calling drr_init+0x0/0xf @ 1 initcall drr_init+0x0/0xf returned 0 after 0 usecs calling init_route4+0x0/0xf @ 1 initcall init_route4+0x0/0xf returned 0 after 0 usecs calling init_fw+0x0/0xf @ 1 initcall init_fw+0x0/0xf returned 0 after 0 usecs calling init_tcindex+0x0/0xf @ 1 initcall init_tcindex+0x0/0xf returned 0 after 0 usecs calling init_basic+0x0/0xf @ 1 initcall init_basic+0x0/0xf returned 0 after 0 usecs calling nfnetlink_init+0x0/0x27 @ 1 Netfilter messages via NETLINK v0.30. initcall nfnetlink_init+0x0/0x27 returned 0 after 3324 usecs calling nfnetlink_log_init+0x0/0xc1 @ 1 initcall nfnetlink_log_init+0x0/0xc1 returned 0 after 7 usecs calling xt_init+0x0/0xb1 @ 1 initcall xt_init+0x0/0xb1 returned 0 after 0 usecs calling tcpudp_mt_init+0x0/0x14 @ 1 initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 usecs calling mark_mt_init+0x0/0x37 @ 1 initcall mark_mt_init+0x0/0x37 returned 0 after 0 usecs calling classify_tg_init+0x0/0xf @ 1 initcall classify_tg_init+0x0/0xf returned 0 after 0 usecs calling hl_tg_init+0x0/0x14 @ 1 initcall hl_tg_init+0x0/0x14 returned 0 after 0 usecs calling nflog_tg_init+0x0/0xf @ 1 initcall nflog_tg_init+0x0/0xf returned 0 after 0 usecs calling xt_rateest_tg_init+0x0/0x24 @ 1 initcall xt_rateest_tg_init+0x0/0x24 returned 0 after 0 usecs calling dccp_mt_init+0x0/0xb5 @ 1 initcall dccp_mt_init+0x0/0xb5 returned 0 after 0 usecs calling hl_mt_init+0x0/0x14 @ 1 initcall hl_mt_init+0x0/0x14 returned 0 after 0 usecs calling limit_mt_init+0x0/0xf @ 1 initcall limit_mt_init+0x0/0xf returned 0 after 0 usecs calling mac_mt_init+0x0/0xf @ 1 initcall mac_mt_init+0x0/0xf returned 0 after 0 usecs calling multiport_mt_init+0x0/0x14 @ 1 initcall multiport_mt_init+0x0/0x14 returned 0 after 0 usecs calling xt_osf_init+0x0/0x83 @ 1 initcall xt_osf_init+0x0/0x83 returned 0 after 0 usecs calling owner_mt_init+0x0/0xf @ 1 initcall owner_mt_init+0x0/0xf returned 0 after 0 usecs calling quota_mt_init+0x0/0xf @ 1 initcall quota_mt_init+0x0/0xf returned 0 after 0 usecs calling xt_rateest_mt_init+0x0/0xf @ 1 initcall xt_rateest_mt_init+0x0/0xf returned 0 after 0 usecs calling realm_mt_init+0x0/0xf @ 1 initcall realm_mt_init+0x0/0xf returned 0 after 0 usecs calling sctp_mt_init+0x0/0x14 @ 1 initcall sctp_mt_init+0x0/0x14 returned 0 after 0 usecs calling statistic_mt_init+0x0/0xf @ 1 initcall statistic_mt_init+0x0/0xf returned 0 after 0 usecs calling string_mt_init+0x0/0xf @ 1 initcall string_mt_init+0x0/0xf returned 0 after 0 usecs calling tcpmss_mt_init+0x0/0x14 @ 1 initcall tcpmss_mt_init+0x0/0x14 returned 0 after 0 usecs calling time_mt_init+0x0/0x5e @ 1 xt_time: kernel timezone is -0000 initcall time_mt_init+0x0/0x5e returned 0 after 2983 usecs calling u32_mt_init+0x0/0xf @ 1 initcall u32_mt_init+0x0/0xf returned 0 after 0 usecs calling sysctl_ipv4_init+0x0/0x71 @ 1 initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 9 usecs calling ipip_init+0x0/0x55 @ 1 IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x55 returned 0 after 2875 usecs calling ipgre_init+0x0/0x90 @ 1 GRE over IPv4 tunneling driver initcall ipgre_init+0x0/0x90 returned 0 after 2793 usecs calling init_syncookies+0x0/0x16 @ 1 initcall init_syncookies+0x0/0x16 returned 0 after 32 usecs calling ah4_init+0x0/0x66 @ 1 initcall ah4_init+0x0/0x66 returned 0 after 0 usecs calling tunnel4_init+0x0/0x31 @ 1 initcall tunnel4_init+0x0/0x31 returned 0 after 0 usecs calling xfrm4_transport_init+0x0/0x14 @ 1 initcall xfrm4_transport_init+0x0/0x14 returned 0 after 0 usecs calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1 initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs calling ipv4_netfilter_init+0x0/0x20 @ 1 initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs calling ip_tables_init+0x0/0x90 @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0x90 returned 0 after 3918 usecs calling iptable_filter_init+0x0/0x61 @ 1 initcall iptable_filter_init+0x0/0x61 returned 0 after 9 usecs calling iptable_security_init+0x0/0x40 @ 1 initcall iptable_security_init+0x0/0x40 returned 0 after 4 usecs calling addrtype_mt_init+0x0/0x14 @ 1 initcall addrtype_mt_init+0x0/0x14 returned 0 after 0 usecs calling ah_mt_init+0x0/0xf @ 1 initcall ah_mt_init+0x0/0xf returned 0 after 0 usecs calling ulog_tg_init+0x0/0xd0 @ 1 initcall ulog_tg_init+0x0/0xd0 returned 0 after 4 usecs calling arp_tables_init+0x0/0x6c @ 1 arp_tables: (C) 2002 David S. Miller initcall arp_tables_init+0x0/0x6c returned 0 after 3247 usecs calling ip_queue_init+0x0/0x124 @ 1 initcall ip_queue_init+0x0/0x124 returned 0 after 10 usecs calling inet_diag_init+0x0/0xd8 @ 1 initcall inet_diag_init+0x0/0xd8 returned 0 after 1 usecs calling tcp_diag_init+0x0/0xf @ 1 initcall tcp_diag_init+0x0/0xf returned 0 after 0 usecs calling bictcp_register+0x0/0xf @ 1 TCP bic registered initcall bictcp_register+0x0/0xf returned 0 after 1708 usecs calling hstcp_register+0x0/0xf @ 1 TCP highspeed registered initcall hstcp_register+0x0/0xf returned 0 after 2218 usecs calling hybla_register+0x0/0xf @ 1 TCP hybla registered initcall hybla_register+0x0/0xf returned 0 after 1878 usecs calling htcp_register+0x0/0xf @ 1 TCP htcp registered initcall htcp_register+0x0/0xf returned 0 after 1794 usecs calling tcp_vegas_register+0x0/0x11 @ 1 TCP vegas registered initcall tcp_vegas_register+0x0/0x11 returned 0 after 1881 usecs calling tcp_lp_register+0x0/0xf @ 1 TCP lp registered initcall tcp_lp_register+0x0/0xf returned 0 after 1628 usecs calling tcp_yeah_register+0x0/0x11 @ 1 TCP yeah registered initcall tcp_yeah_register+0x0/0x11 returned 0 after 1798 usecs calling packet_init+0x0/0x39 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x39 returned 0 after 3070 usecs calling ipsec_pfkey_init+0x0/0x6b @ 1 NET: Registered protocol family 15 initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 3067 usecs calling br_init+0x0/0x9b @ 1 initcall br_init+0x0/0x9b returned 0 after 11 usecs calling dsa_init_module+0x0/0x11 @ 1 initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs calling mv88e6131_init+0x0/0x11 @ 1 initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs calling dsa_init_module+0x0/0xf @ 1 initcall dsa_init_module+0x0/0xf returned 0 after 20 usecs calling ipx_init+0x0/0xd9 @ 1 NET: Registered protocol family 4 initcall ipx_init+0x0/0xd9 returned 0 after 3222 usecs calling atalk_init+0x0/0x7b @ 1 NET: Registered protocol family 5 initcall atalk_init+0x0/0x7b returned 0 after 2994 usecs calling lapb_init+0x0/0x7 @ 1 initcall lapb_init+0x0/0x7 returned 0 after 0 usecs calling ax25_init+0x0/0x94 @ 1 NET: Registered protocol family 3 initcall ax25_init+0x0/0x94 returned 0 after 2986 usecs calling can_init+0x0/0xcc @ 1 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 initcall can_init+0x0/0xcc returned 0 after 7845 usecs calling raw_module_init+0x0/0x36 @ 1 can: raw protocol (rev 20090105) initcall raw_module_init+0x0/0x36 returned 0 after 2894 usecs calling l2cap_init+0x0/0x127 @ 1 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized initcall l2cap_init+0x0/0x127 returned 0 after 5980 usecs calling rfcomm_init+0x0/0xe8 @ 1 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 initcall rfcomm_init+0x0/0xe8 returned 0 after 9638 usecs calling bnep_init+0x0/0x8d @ 1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast initcall bnep_init+0x0/0x8d returned 0 after 7742 usecs calling init_rpcsec_gss+0x0/0x3f @ 1 initcall init_rpcsec_gss+0x0/0x3f returned 0 after 10 usecs calling init_kerberos_module+0x0/0x2a @ 1 initcall init_kerberos_module+0x0/0x2a returned 0 after 2 usecs calling xprt_rdma_init+0x0/0xbe @ 1 RPC: Registered rdma transport module. initcall xprt_rdma_init+0x0/0xbe returned 0 after 3407 usecs calling svc_rdma_init+0x0/0x170 @ 1 initcall svc_rdma_init+0x0/0x170 returned 0 after 8 usecs calling af_rxrpc_init+0x0/0x189 @ 1 NET: Registered protocol family 33 initcall af_rxrpc_init+0x0/0x189 returned 0 after 3098 usecs calling atm_clip_init+0x0/0xa7 @ 1 initcall atm_clip_init+0x0/0xa7 returned 0 after 12 usecs calling br2684_init+0x0/0x41 @ 1 initcall br2684_init+0x0/0x41 returned 0 after 1 usecs calling pppoatm_init+0x0/0x11 @ 1 initcall pppoatm_init+0x0/0x11 returned 0 after 0 usecs calling l2tp_init+0x0/0x33 @ 1 L2TP core driver, V2.0 initcall l2tp_init+0x0/0x33 returned 0 after 2060 usecs calling phonet_init+0x0/0x74 @ 1 NET: Registered protocol family 35 initcall phonet_init+0x0/0x74 returned 0 after 3083 usecs calling pep_register+0x0/0x14 @ 1 initcall pep_register+0x0/0x14 returned 0 after 1 usecs calling sctp_init+0x0/0x6b5 @ 1 SCTP: Hash tables configured (established 65536 bind 65536) sctp_init_sock(sk: 7e948000) initcall sctp_init+0x0/0x6b5 returned 0 after 8229 usecs calling lib80211_init+0x0/0x1f @ 1 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' initcall lib80211_init+0x0/0x1f returned 0 after 8077 usecs calling lib80211_crypto_wep_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'WEP' initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 3742 usecs calling lib80211_crypto_ccmp_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'CCMP' initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 3835 usecs calling lib80211_crypto_tkip_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'TKIP' initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 3828 usecs calling tipc_init+0x0/0xbf @ 1 TIPC: Activated (version 2.0.0 compiled Sep 3 2010 18:18:22) NET: Registered protocol family 30 TIPC: Started in single node mode initcall tipc_init+0x0/0xbf returned 0 after 11508 usecs calling caif_device_init+0x0/0x72 @ 1 initcall caif_device_init+0x0/0x72 returned 0 after 9 usecs calling caif_sktinit_module+0x0/0x145 @ 1 NET: Registered protocol family 37 initcall caif_sktinit_module+0x0/0x145 returned 0 after 3099 usecs calling af_ieee802154_init+0x0/0x63 @ 1 NET: Registered protocol family 36 initcall af_ieee802154_init+0x0/0x63 returned 0 after 3070 usecs calling mcheck_debugfs_init+0x0/0x3f @ 1 initcall mcheck_debugfs_init+0x0/0x3f returned 0 after 3 usecs calling severities_debugfs_init+0x0/0x3f @ 1 initcall severities_debugfs_init+0x0/0x3f returned 0 after 1 usecs calling check_early_ioremap_leak+0x0/0x6a @ 1 initcall check_early_ioremap_leak+0x0/0x6a returned 0 after 0 usecs calling init_oops_id+0x0/0x50 @ 1 initcall init_oops_id+0x0/0x50 returned 0 after 2 usecs calling disable_boot_consoles+0x0/0x45 @ 1 initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0xc0 @ 1 initcall pm_qos_power_init+0x0/0xc0 returned 0 after 309 usecs calling clear_boot_tracer+0x0/0x2e @ 1 initcall clear_boot_tracer+0x0/0x2e returned 0 after 0 usecs calling init_ima+0x0/0x14 @ 1 tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291 IMA: No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x14 returned 0 after 9142 usecs calling random32_reseed+0x0/0x56 @ 1 initcall random32_reseed+0x0/0x56 returned 0 after 5 usecs calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 1 usecs calling pci_sysfs_init+0x0/0x44 @ 1 initcall pci_sysfs_init+0x0/0x44 returned 0 after 564 usecs calling regulator_init_complete+0x0/0x111 @ 1 initcall regulator_init_complete+0x0/0x111 returned 0 after 0 usecs calling seqgen_init+0x0/0xe @ 1 initcall seqgen_init+0x0/0xe returned 0 after 13 usecs calling scsi_complete_async_scans+0x0/0x1c0 @ 1 initcall scsi_complete_async_scans+0x0/0x1c0 returned 0 after 0 usecs calling memmap_init+0x0/0x30 @ 1 initcall memmap_init+0x0/0x30 returned 0 after 21 usecs calling dmatest_init+0x0/0x1a8 @ 1 __dma_request_channel: fail ((null)) initcall dmatest_init+0x0/0x1a8 returned 0 after 3239 usecs calling init_net_drop_monitor+0x0/0xff @ 1 Initalizing network drop monitor service initcall init_net_drop_monitor+0x0/0xff returned 0 after 3583 usecs calling tcp_congestion_default+0x0/0xf @ 1 initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs calling initialize_hashrnd+0x0/0x16 @ 1 initcall initialize_hashrnd+0x0/0x16 returned 0 after 3 usecs async_waiting @ 1 async_continuing @ 1 after 0 usec md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect async_waiting @ 1 async_continuing @ 1 after 0 usec md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (sda1): recovery required on readonly filesystem EXT3-fs (sda1): write access will be enabled during recovery EXT3-fs: barriers not enabled BUG: unable to handle kernel NULL pointer dereference at 00000340 IP: [<4102dde1>] print_context_stack+0x81/0x110 *pde = 00000000 Oops: 0000 [#1] PREEMPT last sysfs file: Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0 EIP is at print_context_stack+0x81/0x110 EAX: 00000000 EBX: 41f62d70 ECX: 00000000 EDX: 41f62000 ESI: 00000000 EDI: 41c5bc3c EBP: 41f62d54 ESP: 41f62d30 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000) Stack: 41047a83 41f63ffc 41f62d84 ffffe000 41f62000 41f62d84 41f62d70 41c5bc3c <0> 41f62000 41f62d84 4102ca48 41c5bc3c 7f9731b0 00000000 41f62d74 41f62d84 <0> 41047a83 00000000 7f9731b0 00000046 7f9731d4 41f62d9c 41033e50 00000000 Call Trace: [<41047a83>] ? enqueue_task+0x43/0x60 BUG: unable to handle kernel NULL pointer dereference at 00000340 IP: [<4102dde1>] print_context_stack+0x81/0x110 *pde = 00000000 Oops: 0000 [#2] PREEMPT last sysfs file: Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0 EIP is at print_context_stack+0x81/0x110 EAX: 00000000 EBX: 41f62d30 ECX: fffe0560 EDX: 41f62000 ESI: 00000000 EDI: 41c5b894 EBP: 41f62b18 ESP: 41f62af4 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000) Stack: 41047a83 41f63ffc 41f62b48 ffffe000 41f62000 41f62b48 41f62d30 41c5b894 <0> 41f62000 41f62b48 4102ca48 41c5b894 41de0bec 00000000 41f62b38 41f62cf4 <0> 41de0bec 00000000 00000000 41f62cf4 41de0bec 41f62b6c 4102dc3d 00000000 Call Trace: [<41047a83>] ? enqueue_task+0x43/0x60 BUG: unable to handle kernel NULL pointer dereference at 00000340 IP: [<4102dde1>] print_context_stack+0x81/0x110 *pde = 00000000 Oops: 0000 [#3] PREEMPT last sysfs file: Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0 EIP is at print_context_stack+0x81/0x110 EAX: 00000000 EBX: 41f62af4 ECX: fffe01d3 EDX: 41f62000 ESI: 00000000 EDI: 41c5b894 EBP: 41f628dc ESP: 41f628b8 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000) Stack: 41047a83 41f63ffc 41f6290c ffffe000 41f62000 41f6290c 41f62af4 41c5b894 <0> 41f62000 41f6290c 4102ca48 41c5b894 41de0bec 00000000 41f628fc 41f62ab8 <0> 41de0bec 00000000 00000000 41f62ab8 41de0bec 41f62930 4102dc3d 00000000 Call Trace: [<41047a83>] ? enqueue_task+0x43/0x60 BUG: unable to handle kernel NULL pointer dereference at 00000340 IP: [<4102dde1>] print_context_stack+0x81/0x110 *pde = 00000000 Oops: 0000 [#4] PREEMPT last sysfs file: Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0 EIP is at print_context_stack+0x81/0x110 EAX: 00000000 EBX: 41f628b8 ECX: fffdfe46 EDX: 41f62000 ESI: 00000000 EDI: 41c5b894 EBP: 41f626a0 ESP: 41f6267c DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000) Stack: 41047a83 41f63ffc 41f626d0 ffffe000 41f62000 41f626d0 41f628b8 41c5b894 <0> 41f62000 41f626d0 4102ca48 41c5b894 41de0bec 00000000 41f626c0 41f6287c <0> 41de0bec 00000000 00000000 41f6287c 41de0bec 41f626f4 4102dc3d 00000000 Call Trace: [<41047a83>] ? enqueue_task+0x43/0x60 BUG: unable to handle kernel NULL pointer dereference at 00000340 IP: [<4102dde1>] print_context_stack+0x81/0x110 *pde = 00000000 Oops: 0000 [#5] PREEMPT last sysfs file: Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0 EIP is at print_context_stack+0x81/0x110 EAX: 00000000 EBX: 41f6267c ECX: fffdfab9 EDX: 41f62000 ESI: 00000000 EDI: 41c5b894 EBP: 41f62464 ESP: 41f62440 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000) Stack: 41047a83 41f63ffc 41f62494 ffffe000 41f62000 41f62494 41f6267c 41c5b894 <0> 41f62000 41f62494 4102ca48 41c5b894 41de0bec 00000000 41f62484 41f62640 <0> 41de0bec 00000000 00000000 41f62640 41de0bec 41f624b8 4102dc3d 00000000 Call Trace: [<41047a83>] ? enqueue_task+0x43/0x60 BUG: unable to handle kernel NULL pointer dereference at 000003a0 IP: [<4102dde1>] print_context_stack+0x81/0x110 *pde = 00000000 Oops: 0000 [#6] PREEMPT last sysfs file: Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0 EIP is at print_context_stack+0x81/0x110 EAX: 00000060 EBX: 41f62440 ECX: fffdf72c EDX: 41f62000 ESI: 00000000 EDI: 41c5b894 EBP: 41f62228 ESP: 41f62204 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000) Stack: 41047a83 41f63ffc 41f62258 ffffe000 41f62000 41f62258 41f62440 41c5b894 <0> 41f62000 41f62258 4102ca48 41c5b894 41de0bec 00000000 41f62248 41f62404 <0> 41de0bec 00000000 00000000 41f62404 41de0bec 41f6227c 4102dc3d 00000000 Call Trace: [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<41047a83>] ? enqueue_task+0x43/0x60 [<41033e50>] ? save_stack_trace+0x30/0x50 [<4146ac40>] ? dma_entry_alloc+0x80/0xd0 [<4146bb33>] ? debug_dma_map_sg+0x83/0x140 [<41690881>] ? ata_qc_issue+0x161/0x310 [<4169698e>] ? ata_scsi_translate+0x7e/0x140 [<410aaa23>] ? mempool_free_slab+0x13/0x20 [<41548810>] ? scsi_done+0x0/0x70 [<41548810>] ? scsi_done+0x0/0x70 [<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0 [<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270 [<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0 [<4154f199>] ? scsi_request_fn+0x3c9/0x530 [<410b9ddc>] ? clear_bdi_congested+0xc/0x40 [<414423ba>] ? __blk_run_queue+0x3a/0x70 [<414446f4>] ? blk_run_queue+0x34/0x70 [<4154f586>] ? scsi_run_queue+0xd6/0x380 [<41548db1>] ? __scsi_put_command+0x71/0xa0 [<4154f999>] ? scsi_next_command+0x39/0x50 [<4154fec1>] ? scsi_io_completion+0x2f1/0x510 [<4154fa95>] ? scsi_device_unbusy+0x95/0xe0 [<41547dde>] ? scsi_finish_command+0x8e/0xc0 [<41550207>] ? scsi_softirq_done+0x107/0x140 [<4144989a>] ? blk_done_softirq+0x6a/0x80 [<410545ce>] ? __do_softirq+0x7e/0x1a0 [<41054550>] ? __do_softirq+0x0/0x1a0 [<4102c9af>] ? do_softirq+0x7f/0xb0 [<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<41c55423>] ? error_code+0x6b/0x70 [<4102dde1>] ? print_context_stack+0x81/0x110 [<41047a83>] ? enqueue_task+0x43/0x60 [<4102ca48>] ? dump_trace+0x68/0xd0 [<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60 [<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0 [<4102cc87>] ? show_registers+0xb7/0x1f0 [<4106e60e>] ? notify_die+0x2e/0x30 [<4102d8cb>] ? __die+0xab/0x100 [<4103dc72>] ? no_context+0xa2/0x160 [<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4106ddd1>] ? up+0x41/0x70 [<41047669>] ? sub_preempt_count+0x9/0x50 [<4103dfe0>] ? do_page_fault+0x0/0x380 [<4103de88>] ? bad_area_nosemaphore+0x18/0x20 [<4103e2af>] ? do_page_fault+0x2cf/0x380 [<4104f883>] ? vprintk+0x173/0x3c0 [<418676c0>] ? write_msg+0x0/0x110 [<4104ec15>] ? __call_console_drivers+0x45/0x60 [<41047669>] ? sub_preempt_count+0x9/0x50