linux-kernel - Re: [PATCH v2] Input: Make ADS7846 independent on regulator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 07 Sep 2010 15:23:15 +0300
From:	Igor Grinberg <grinberg@...pulab.co.il>
To:	Marek Vasut <marek.vasut@...il.com>
CC:	linux-arm-kernel@...ts.infradead.org, vapier@...too.org,
	khilman@...prootsystems.com, dmitry.torokhov@...il.com,
	linux-kernel@...r.kernel.org, pavel@....cz,
	linux-input@...r.kernel.org, eric.y.miao@...il.com,
	akpm@...ux-foundation.org
Subject: Re: [PATCH v2] Input: Make ADS7846 independent on regulator

 Seems that there are some more platforms then Sharp Zaurus
are interested in this patch.

Dmitry, Mike, Pavel,

What's the status of it?

On 07/31/10 10:09, Marek Vasut wrote:
> In case regulator was not found, ADS7846 failed to probe.
>
> This fixes a problem on some Sharp Zaurus devices, where there is no regulator
> present and the touchscreen is used.
>
> Signed-off-by: Marek Vasut <marek.vasut@...il.com>
> ---
>  drivers/input/touchscreen/ads7846.c |   38 +++++++++++++++++++---------------
>  1 files changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index a9fdf55..53b318b 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -791,7 +791,8 @@ static void ads7846_disable(struct ads7846 *ts)
>  		}
>  	}
>  
> -	regulator_disable(ts->reg);
> +	if (ts->reg)
> +		regulator_disable(ts->reg);
>  
>  	/* we know the chip's in lowpower mode since we always
>  	 * leave it that way after every request
> @@ -804,7 +805,8 @@ static void ads7846_enable(struct ads7846 *ts)
>  	if (!ts->disabled)
>  		return;
>  
> -	regulator_enable(ts->reg);
> +	if (ts->reg)
> +		regulator_enable(ts->reg);
>  
>  	ts->disabled = 0;
>  	ts->irq_disabled = 0;
> @@ -1162,16 +1164,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
>  	ts->last_msg = m;
>  
>  	ts->reg = regulator_get(&spi->dev, "vcc");
> -	if (IS_ERR(ts->reg)) {
> -		err = PTR_ERR(ts->reg);
> -		dev_err(&spi->dev, "unable to get regulator: %d\n", err);
> -		goto err_free_gpio;
> -	}
> -
> -	err = regulator_enable(ts->reg);
> -	if (err) {
> -		dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
> -		goto err_put_regulator;
> +	if (IS_ERR(ts->reg))
> +		ts->reg = NULL;
> +	else {
> +		err = regulator_enable(ts->reg);
> +		if (err) {
> +			dev_err(&spi->dev, "unable to enable regulator: %d\n",
> +				err);
> +			goto err_put_regulator;
> +		}
>  	}
>  
>  	if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
> @@ -1218,10 +1219,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
>   err_free_irq:
>  	free_irq(spi->irq, ts);
>   err_disable_regulator:
> -	regulator_disable(ts->reg);
> +	if (ts->reg)
> +		regulator_disable(ts->reg);
>   err_put_regulator:
> -	regulator_put(ts->reg);
> - err_free_gpio:
> +	if (ts->reg)
> +		regulator_put(ts->reg);
>  	if (ts->gpio_pendown != -1)
>  		gpio_free(ts->gpio_pendown);
>   err_cleanup_filter:
> @@ -1251,8 +1253,10 @@ static int __devexit ads7846_remove(struct spi_device *spi)
>  	/* suspend left the IRQ disabled */
>  	enable_irq(ts->spi->irq);
>  
> -	regulator_disable(ts->reg);
> -	regulator_put(ts->reg);
> +	if (ts->reg) {
> +		regulator_disable(ts->reg);
> +		regulator_put(ts->reg);
> +	}
>  
>  	if (ts->gpio_pendown != -1)
>  		gpio_free(ts->gpio_pendown);

-- 
Regards,
Igor.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/