linux-kernel - RE: PATA IDE is slower in newer versions of kernel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <010d01cb5769$cbca3380$635e9a80$@com>
Date:	Sat, 18 Sep 2010 13:43:40 -0600
From:	"Joshua Hintze" <joshh@...ar.com>
To:	"'Maxim Levitsky'" <maximlevitsky@...il.com>
Cc:	<linux-kernel@...r.kernel.org>, <linux-ide@...r.kernel.org>
Subject: RE: PATA IDE is slower in newer versions of kernel

Thanks,

I'm not sure what you mean by bisect, other than just the definition of the word. I am breaking this problem down adding printks etc.  I think I'm finally beginng to understand how this works :)

Josh


-----Original Message-----
From: linux-ide-owner@...r.kernel.org [mailto:linux-ide-owner@...r.kernel.org] On Behalf Of Maxim Levitsky
Sent: Saturday, September 18, 2010 1:23 PM
To: Joshua Hintze
Cc: linux-kernel@...r.kernel.org; linux-ide@...r.kernel.org
Subject: RE: PATA IDE is slower in newer versions of kernel

On Sat, 2010-09-18 at 11:12 -0600, Joshua Hintze wrote:
> Some updated information. I created a screen capture of what I am seeing. First is the logic analyzer when the newer linux kernel is writing slow to the PATA port.
> 
> http://i56.tinypic.com/oqhrug.png
> 
> Notice in the above link how there is a lot of activating and then large gaps of no activity. After about 9 mS the STOP line is strobed a few times and then DMARQ finally returns to normal operating. The link below shows the picture of an old 2.6.10 kernel where write speeds are much faster.
> 
> http://i51.tinypic.com/a9wiur.png
> 
> In the above image notice how the wait time is considerable less 100's of microseconds before the stop lines get strobed.
> 
> I'm dedicated to continue working on the problem, I just need to advice from the linux community. I've tried different I/O schedulers such as noop and anticipatory and I'm studying the ide-dma code but still lost to where this is happening.
> 
> Thanks!
> 
Maybe you can just bisect this?
Just a general advice, I don't know ide subsystem at all.

Best regards,
	Maxim Levitsky

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.851 / Virus Database: 271.1.1/3132 - Release Date: 09/18/10 00:34:00

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/