| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1285195806-11614-1-git-send-email-nab@linux-iscsi.org>
Date: Wed, 22 Sep 2010 15:50:06 -0700
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Cc: FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
Mike Christie <michaelc@...wisc.edu>,
Christoph Hellwig <hch@....de>, Hannes Reinecke <hare@...e.de>,
James Bottomley <James.Bottomley@...e.de>,
Jens Axboe <axboe@...nel.dk>,
Boaz Harrosh <bharrosh@...asas.com>,
Nicholas Bellinger <nab@...ux-iscsi.org>
Subject: [RFC v2 10/21] tcm: Add SPC-4 compliant Persistent Reservations (PR)
From: Nicholas Bellinger <nab@...ux-iscsi.org>
This patch adds exhaustive support for SPC-4 compliant persistent reservations for
target_core_mod/ConfigFS storage objects. This includes all supported PROUT/PRIN Service
Actions and feature bits including SPEC_I_PORT=1 and APTPL=1
Please see the following for more information:
http://www.linux-iscsi.org/index.php/Persistent_Reservations
Signed-off-by: Nicholas A. Bellinger <nab@...ux-iscsi.org>
---
drivers/target/target_core_pr.c | 4243 +++++++++++++++++++++++++++++++++++++++
drivers/target/target_core_pr.h | 67 +
2 files changed, 4310 insertions(+), 0 deletions(-)
create mode 100644 drivers/target/target_core_pr.c
create mode 100644 drivers/target/target_core_pr.h
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
new file mode 100644
index 0000000..141ce48
--- /dev/null
+++ b/drivers/target/target_core_pr.c
@@ -0,0 +1,4243 @@
+/*******************************************************************************
+ * Filename: target_core_pr.c
+ *
+ * This file contains SPC-3 compliant persistent reservations and
+ * legacy SPC-2 reservations with compatible reservation handling (CRH=1)
+ *
+ * Copyright (c) 2009, 2010 Rising Tide Systems
+ * Copyright (c) 2009, 2010 Linux-iSCSI.org
+ *
+ * Nicholas A. Bellinger <nab@...nel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ******************************************************************************/
+
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <asm/unaligned.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tmr.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_configfs.h>
+
+#include "target_core_hba.h"
+#include "target_core_pr.h"
+#include "target_core_ua.h"
+
+/*
+ * Used for Specify Initiator Ports Capable Bit (SPEC_I_PT)
+ */
+struct pr_transport_id_holder {
+ int dest_local_nexus;
+ struct t10_pr_registration *dest_pr_reg;
+ struct se_portal_group *dest_tpg;
+ struct se_node_acl *dest_node_acl;
+ struct se_dev_entry *dest_se_deve;
+ struct list_head dest_list;
+};
+
+int core_pr_dump_initiator_port(
+ struct t10_pr_registration *pr_reg,
+ char *buf,
+ u32 size)
+{
+ if (!(pr_reg->isid_present_at_reg))
+ return 0;
+
+ snprintf(buf, size, ",i,0x%s", &pr_reg->pr_reg_isid[0]);
+ return 1;
+}
+
+static void __core_scsi3_complete_pro_release(struct se_device *, struct se_node_acl *,
+ struct t10_pr_registration *, int);
+
+int core_scsi2_reservation_seq_non_holder(
+ struct se_cmd *cmd,
+ unsigned char *cdb,
+ u32 pr_reg_type)
+{
+ switch (cdb[0]) {
+ case INQUIRY:
+ case RELEASE:
+ case RELEASE_10:
+ return 0;
+ default:
+ return 1;
+ }
+
+ return 1;
+}
+
+int core_scsi2_reservation_check(struct se_cmd *cmd, u32 *pr_reg_type)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+ int ret;
+
+ if (!(sess))
+ return 0;
+
+ spin_lock(&dev->dev_reservation_lock);
+ if (!dev->dev_reserved_node_acl || !sess) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return 0;
+ }
+ if (dev->dev_reserved_node_acl != sess->se_node_acl) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return -1;
+ }
+ if (!(dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID)) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return 0;
+ }
+ ret = (dev->dev_res_bin_isid == sess->sess_bin_isid) ? 0 : -1;
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(core_scsi2_reservation_check);
+
+int core_scsi2_reservation_release(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+ struct se_portal_group *tpg = sess->se_tpg;
+
+ if (!(sess) || !(tpg))
+ return 0;
+
+ spin_lock(&dev->dev_reservation_lock);
+ if (!dev->dev_reserved_node_acl || !sess) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return 0;
+ }
+
+ if (dev->dev_reserved_node_acl != sess->se_node_acl) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return 0;
+ }
+ dev->dev_reserved_node_acl = NULL;
+ dev->dev_flags &= ~DF_SPC2_RESERVATIONS;
+ if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) {
+ dev->dev_res_bin_isid = 0;
+ dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID;
+ }
+ printk(KERN_INFO "SCSI-2 Released reservation for %s LUN: %u ->"
+ " MAPPED LUN: %u for %s\n", TPG_TFO(tpg)->get_fabric_name(),
+ SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun,
+ sess->se_node_acl->initiatorname);
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(core_scsi2_reservation_release);
+
+int core_scsi2_reservation_reserve(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+ struct se_portal_group *tpg = sess->se_tpg;
+
+ if ((T_TASK(cmd)->t_task_cdb[1] & 0x01) &&
+ (T_TASK(cmd)->t_task_cdb[1] & 0x02)) {
+ printk(KERN_ERR "LongIO and Obselete Bits set, returning"
+ " ILLEGAL_REQUEST\n");
+ return PYX_TRANSPORT_ILLEGAL_REQUEST;
+ }
+ /*
+ * This is currently the case for target_core_mod passthrough struct se_cmd
+ * ops
+ */
+ if (!(sess) || !(tpg))
+ return 0;
+
+ spin_lock(&dev->dev_reservation_lock);
+ if (dev->dev_reserved_node_acl &&
+ (dev->dev_reserved_node_acl != sess->se_node_acl)) {
+ printk(KERN_ERR "SCSI-2 RESERVATION CONFLIFT for %s fabric\n",
+ TPG_TFO(tpg)->get_fabric_name());
+ printk(KERN_ERR "Original reserver LUN: %u %s\n",
+ SE_LUN(cmd)->unpacked_lun,
+ dev->dev_reserved_node_acl->initiatorname);
+ printk(KERN_ERR "Current attempt - LUN: %u -> MAPPED LUN: %u"
+ " from %s \n", SE_LUN(cmd)->unpacked_lun,
+ cmd->se_deve->mapped_lun,
+ sess->se_node_acl->initiatorname);
+ spin_unlock(&dev->dev_reservation_lock);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+
+ dev->dev_reserved_node_acl = sess->se_node_acl;
+ dev->dev_flags |= DF_SPC2_RESERVATIONS;
+ if (sess->sess_bin_isid != 0) {
+ dev->dev_res_bin_isid = sess->sess_bin_isid;
+ dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID;
+ }
+ printk(KERN_INFO "SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u"
+ " for %s\n", TPG_TFO(tpg)->get_fabric_name(),
+ SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun,
+ sess->se_node_acl->initiatorname);
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(core_scsi2_reservation_reserve);
+
+static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *,
+ struct se_node_acl *, struct se_session *);
+static void core_scsi3_put_pr_reg(struct t10_pr_registration *);
+
+/*
+ * Setup in target_core_transport.c:transport_generic_cmd_sequencer()
+ * and called via struct se_cmd->transport_emulate_cdb() in TCM processing
+ * thread context.
+ */
+int core_scsi2_emulate_crh(struct se_cmd *cmd)
+{
+ struct se_session *se_sess = cmd->se_sess;
+ struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
+ struct t10_pr_registration *pr_reg;
+ struct t10_reservation_template *pr_tmpl = &su_dev->t10_reservation;
+ unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0];
+ int crh = (T10_RES(su_dev)->res_type == SPC3_PERSISTENT_RESERVATIONS);
+ int conflict = 0;
+
+ if (!(se_sess))
+ return 0;
+
+ if (!(crh))
+ goto after_crh;
+
+ pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl,
+ se_sess);
+ if (pr_reg) {
+ /*
+ * From spc4r17 5.7.3 Exceptions to SPC-2 RESERVE and RELEASE
+ * behavior
+ *
+ * A RESERVE(6) or RESERVE(10) command shall complete with GOOD
+ * status, but no reservation shall be established and the
+ * persistent reservation shall not be changed, if the command
+ * is received from a) and b) below.
+ *
+ * A RELEASE(6) or RELEASE(10) command shall complete with GOOD
+ * status, but the persistent reservation shall not be released,
+ * if the command is received from a) and b)
+ *
+ * a) An I_T nexus that is a persistent reservation holder; or
+ * b) An I_T nexus that is registered if a registrants only or
+ * all registrants type persistent reservation is present.
+ *
+ * In all other cases, a RESERVE(6) command, RESERVE(10) command,
+ * RELEASE(6) command, or RELEASE(10) command shall be processed
+ * as defined in SPC-2.
+ */
+ if (pr_reg->pr_res_holder) {
+ core_scsi3_put_pr_reg(pr_reg);
+ return 0;
+ }
+ if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
+ (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) ||
+ (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+ (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
+ core_scsi3_put_pr_reg(pr_reg);
+ return 0;
+ }
+ core_scsi3_put_pr_reg(pr_reg);
+ conflict = 1;
+ } else {
+ /*
+ * Following spc2r20 5.5.1 Reservations overview:
+ *
+ * If a logical unit has executed a PERSISTENT RESERVE OUT
+ * command with the REGISTER or the REGISTER AND IGNORE
+ * EXISTING KEY service action and is still registered by any
+ * initiator, all RESERVE commands and all RELEASE commands
+ * regardless of initiator shall conflict and shall terminate
+ * with a RESERVATION CONFLICT status.
+ */
+ spin_lock(&pr_tmpl->registration_lock);
+ conflict = (list_empty(&pr_tmpl->registration_list)) ? 0 : 1;
+ spin_unlock(&pr_tmpl->registration_lock);
+ }
+
+ if (conflict) {
+ printk(KERN_ERR "Received legacy SPC-2 RESERVE/RELEASE"
+ " while active SPC-3 registrations exist,"
+ " returning RESERVATION_CONFLICT\n");
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+
+after_crh:
+ if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10))
+ return core_scsi2_reservation_reserve(cmd);
+ else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10))
+ return core_scsi2_reservation_release(cmd);
+ else
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+}
+
+/*
+ * Begin SPC-3/SPC-4 Persistent Reservations emulation support
+ *
+ * This function is called by those initiator ports who are *NOT*
+ * the active PR reservation holder when a reservation is present.
+ */
+static int core_scsi3_pr_seq_non_holder(
+ struct se_cmd *cmd,
+ unsigned char *cdb,
+ u32 pr_reg_type)
+{
+ struct se_dev_entry *se_deve;
+ struct se_session *se_sess = SE_SESS(cmd);
+ int other_cdb = 0, ignore_reg;
+ int registered_nexus = 0, ret = 1; /* Conflict by default */
+ int all_reg = 0, reg_only = 0; /* ALL_REG, REG_ONLY */
+ int we = 0; /* Write Exclusive */
+ int legacy = 0; /* Act like a legacy device and return
+ * RESERVATION CONFLICT on some CDBs */
+ /*
+ * A legacy SPC-2 reservation is being held.
+ */
+ if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS)
+ return core_scsi2_reservation_seq_non_holder(cmd,
+ cdb, pr_reg_type);
+
+ se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+ /*
+ * Determine if the registration should be ignored due to
+ * non-matching ISIDs in core_scsi3_pr_reservation_check().
+ */
+ ignore_reg = (pr_reg_type & 0x80000000);
+ if (ignore_reg)
+ pr_reg_type &= ~0x80000000;
+
+ switch (pr_reg_type) {
+ case PR_TYPE_WRITE_EXCLUSIVE:
+ we = 1;
+ case PR_TYPE_EXCLUSIVE_ACCESS:
+ /*
+ * Some commands are only allowed for the persistent reservation
+ * holder.
+ */
+ if ((se_deve->def_pr_registered) && !(ignore_reg))
+ registered_nexus = 1;
+ break;
+ case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+ we = 1;
+ case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+ /*
+ * Some commands are only allowed for registered I_T Nexuses.
+ */
+ reg_only = 1;
+ if ((se_deve->def_pr_registered) && !(ignore_reg))
+ registered_nexus = 1;
+ break;
+ case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+ we = 1;
+ case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+ /*
+ * Each registered I_T Nexus is a reservation holder.
+ */
+ all_reg = 1;
+ if ((se_deve->def_pr_registered) && !(ignore_reg))
+ registered_nexus = 1;
+ break;
+ default:
+ return -1;
+ }
+ /*
+ * Referenced from spc4r17 table 45 for *NON* PR holder access
+ */
+ switch (cdb[0]) {
+ case SECURITY_PROTOCOL_IN:
+ if (registered_nexus)
+ return 0;
+ ret = (we) ? 0 : 1;
+ break;
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ case READ_ATTRIBUTE:
+ case READ_BUFFER:
+ case RECEIVE_DIAGNOSTIC:
+ if (legacy) {
+ ret = 1;
+ break;
+ }
+ if (registered_nexus) {
+ ret = 0;
+ break;
+ }
+ ret = (we) ? 0 : 1; /* Allowed Write Exclusive */
+ break;
+ case PERSISTENT_RESERVE_OUT:
+ /*
+ * This follows PERSISTENT_RESERVE_OUT service actions that
+ * are allowed in the presence of various reservations.
+ * See spc4r17, table 46
+ */
+ switch (cdb[1] & 0x1f) {
+ case PRO_CLEAR:
+ case PRO_PREEMPT:
+ case PRO_PREEMPT_AND_ABORT:
+ ret = (registered_nexus) ? 0 : 1;
+ break;
+ case PRO_REGISTER:
+ case PRO_REGISTER_AND_IGNORE_EXISTING_KEY:
+ ret = 0;
+ break;
+ case PRO_REGISTER_AND_MOVE:
+ case PRO_RESERVE:
+ ret = 1;
+ break;
+ case PRO_RELEASE:
+ ret = (registered_nexus) ? 0 : 1;
+ break;
+ default:
+ printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service"
+ " action: 0x%02x\n", cdb[1] & 0x1f);
+ return -1;
+ }
+ break;
+ case RELEASE:
+ case RELEASE_10:
+ /* Handled by CRH=1 in core_scsi2_emulate_crh() */
+ ret = 0;
+ break;
+ case RESERVE:
+ case RESERVE_10:
+ /* Handled by CRH=1 in core_scsi2_emulate_crh() */
+ ret = 0;
+ break;
+ case TEST_UNIT_READY:
+ ret = (legacy) ? 1 : 0; /* Conflict for legacy */
+ break;
+ case MAINTENANCE_IN:
+ switch (cdb[1] & 0x1f) {
+ case MI_MANAGEMENT_PROTOCOL_IN:
+ if (registered_nexus) {
+ ret = 0;
+ break;
+ }
+ ret = (we) ? 0 : 1; /* Allowed Write Exclusive */
+ break;
+ case MI_REPORT_SUPPORTED_OPERATION_CODES:
+ case MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS:
+ if (legacy) {
+ ret = 1;
+ break;
+ }
+ if (registered_nexus) {
+ ret = 0;
+ break;
+ }
+ ret = (we) ? 0 : 1; /* Allowed Write Exclusive */
+ break;
+ case MI_REPORT_ALIASES:
+ case MI_REPORT_IDENTIFYING_INFORMATION:
+ case MI_REPORT_PRIORITY:
+ case MI_REPORT_TARGET_PGS:
+ case MI_REPORT_TIMESTAMP:
+ ret = 0; /* Allowed */
+ break;
+ default:
+ printk(KERN_ERR "Unknown MI Service Action: 0x%02x\n",
+ (cdb[1] & 0x1f));
+ return -1;
+ }
+ break;
+ case ACCESS_CONTROL_IN:
+ case ACCESS_CONTROL_OUT:
+ case INQUIRY:
+ case LOG_SENSE:
+ case READ_MEDIA_SERIAL_NUMBER:
+ case REPORT_LUNS:
+ case REQUEST_SENSE:
+ ret = 0; /*/ Allowed CDBs */
+ break;
+ default:
+ other_cdb = 1;
+ break;
+ }
+ /*
+ * Case where the CDB is explictly allowed in the above switch
+ * statement.
+ */
+ if (!(ret) && !(other_cdb)) {
+#if 0
+ printk(KERN_INFO "Allowing explict CDB: 0x%02x for %s"
+ " reservation holder\n", cdb[0],
+ core_scsi3_pr_dump_type(pr_reg_type));
+#endif
+ return ret;
+ }
+ /*
+ * Check if write exclusive initiator ports *NOT* holding the
+ * WRITE_EXCLUSIVE_* reservation.
+ */
+ if ((we) && !(registered_nexus)) {
+ if (cmd->data_direction == DMA_TO_DEVICE) {
+ /*
+ * Conflict for write exclusive
+ */
+ printk(KERN_INFO "%s Conflict for unregistered nexus"
+ " %s CDB: 0x%02x to %s reservation\n",
+ transport_dump_cmd_direction(cmd),
+ se_sess->se_node_acl->initiatorname, cdb[0],
+ core_scsi3_pr_dump_type(pr_reg_type));
+ return 1;
+ } else {
+ /*
+ * Allow non WRITE CDBs for all Write Exclusive
+ * PR TYPEs to pass for registered and
+ * non-registered_nexuxes NOT holding the reservation.
+ *
+ * We only make noise for the unregisterd nexuses,
+ * as we expect registered non-reservation holding
+ * nexuses to issue CDBs.
+ */
+#if 0
+ if (!(registered_nexus)) {
+ printk(KERN_INFO "Allowing implict CDB: 0x%02x"
+ " for %s reservation on unregistered"
+ " nexus\n", cdb[0],
+ core_scsi3_pr_dump_type(pr_reg_type));
+ }
+#endif
+ return 0;
+ }
+ } else if ((reg_only) || (all_reg)) {
+ if (registered_nexus) {
+ /*
+ * For PR_*_REG_ONLY and PR_*_ALL_REG reservations,
+ * allow commands from registered nexuses.
+ */
+#if 0
+ printk(KERN_INFO "Allowing implict CDB: 0x%02x for %s"
+ " reservation\n", cdb[0],
+ core_scsi3_pr_dump_type(pr_reg_type));
+#endif
+ return 0;
+ }
+ }
+ printk(KERN_INFO "%s Conflict for %sregistered nexus %s CDB: 0x%2x"
+ " for %s reservation\n", transport_dump_cmd_direction(cmd),
+ (registered_nexus) ? "" : "un",
+ se_sess->se_node_acl->initiatorname, cdb[0],
+ core_scsi3_pr_dump_type(pr_reg_type));
+
+ return 1; /* Conflict by default */
+}
+
+static u32 core_scsi3_pr_generation(struct se_device *dev)
+{
+ struct se_subsystem_dev *su_dev = SU_DEV(dev);
+ u32 prg;
+ /*
+ * PRGeneration field shall contain the value of a 32-bit wrapping
+ * counter mainted by the device server.
+ *
+ * Note that this is done regardless of Active Persist across
+ * Target PowerLoss (APTPL)
+ *
+ * See spc4r17 section 6.3.12 READ_KEYS service action
+ */
+ spin_lock(&dev->dev_reservation_lock);
+ prg = T10_RES(su_dev)->pr_generation++;
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return prg;
+}
+
+static int core_scsi3_pr_reservation_check(
+ struct se_cmd *cmd,
+ u32 *pr_reg_type)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+ int ret;
+
+ if (!(sess))
+ return 0;
+ /*
+ * A legacy SPC-2 reservation is being held.
+ */
+ if (dev->dev_flags & DF_SPC2_RESERVATIONS)
+ return core_scsi2_reservation_check(cmd, pr_reg_type);
+
+ spin_lock(&dev->dev_reservation_lock);
+ if (!(dev->dev_pr_res_holder)) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return 0;
+ }
+ *pr_reg_type = dev->dev_pr_res_holder->pr_res_type;
+ cmd->pr_res_key = dev->dev_pr_res_holder->pr_res_key;
+ if (dev->dev_pr_res_holder->pr_reg_nacl != sess->se_node_acl) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return -1;
+ }
+ if (!(dev->dev_pr_res_holder->isid_present_at_reg)) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return 0;
+ }
+ ret = (dev->dev_pr_res_holder->pr_reg_bin_isid ==
+ sess->sess_bin_isid) ? 0 : -1;
+ /*
+ * Use bit in *pr_reg_type to notify ISID mismatch in
+ * core_scsi3_pr_seq_non_holder().
+ */
+ if (ret != 0)
+ *pr_reg_type |= 0x80000000;
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return ret;
+}
+
+static struct t10_pr_registration *__core_scsi3_do_alloc_registration(
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ struct se_dev_entry *deve,
+ unsigned char *isid,
+ u64 sa_res_key,
+ int all_tg_pt,
+ int aptpl)
+{
+ struct se_subsystem_dev *su_dev = SU_DEV(dev);
+ struct t10_pr_registration *pr_reg;
+
+ pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_ATOMIC);
+ if (!(pr_reg)) {
+ printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n");
+ return NULL;
+ }
+
+ pr_reg->pr_aptpl_buf = kzalloc(T10_RES(su_dev)->pr_aptpl_buf_len,
+ GFP_ATOMIC);
+ if (!(pr_reg->pr_aptpl_buf)) {
+ printk(KERN_ERR "Unable to allocate pr_reg->pr_aptpl_buf\n");
+ kmem_cache_free(t10_pr_reg_cache, pr_reg);
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&pr_reg->pr_reg_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list);
+ atomic_set(&pr_reg->pr_res_holders, 0);
+ pr_reg->pr_reg_nacl = nacl;
+ pr_reg->pr_reg_deve = deve;
+ pr_reg->pr_res_mapped_lun = deve->mapped_lun;
+ pr_reg->pr_aptpl_target_lun = deve->se_lun->unpacked_lun;
+ pr_reg->pr_res_key = sa_res_key;
+ pr_reg->pr_reg_all_tg_pt = all_tg_pt;
+ pr_reg->pr_reg_aptpl = aptpl;
+ pr_reg->pr_reg_tg_pt_lun = deve->se_lun;
+ /*
+ * If an ISID value for this SCSI Initiator Port exists,
+ * save it to the registration now.
+ */
+ if (isid != NULL) {
+ pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid);
+ snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid);
+ pr_reg->isid_present_at_reg = 1;
+ }
+
+ return pr_reg;
+}
+
+static int core_scsi3_lunacl_depend_item(struct se_dev_entry *);
+static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *);
+
+/*
+ * Function used for handling PR registrations for ALL_TG_PT=1 and ALL_TG_PT=0
+ * modes.
+ */
+static struct t10_pr_registration *__core_scsi3_alloc_registration(
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ struct se_dev_entry *deve,
+ unsigned char *isid,
+ u64 sa_res_key,
+ int all_tg_pt,
+ int aptpl)
+{
+ struct se_dev_entry *deve_tmp;
+ struct se_node_acl *nacl_tmp;
+ struct se_port *port, *port_tmp;
+ struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo;
+ struct t10_pr_registration *pr_reg, *pr_reg_atp, *pr_reg_tmp, *pr_reg_tmp_safe;
+ int ret;
+ /*
+ * Create a registration for the I_T Nexus upon which the
+ * PROUT REGISTER was received.
+ */
+ pr_reg = __core_scsi3_do_alloc_registration(dev, nacl, deve, isid,
+ sa_res_key, all_tg_pt, aptpl);
+ if (!(pr_reg))
+ return NULL;
+ /*
+ * Return pointer to pr_reg for ALL_TG_PT=0
+ */
+ if (!(all_tg_pt))
+ return pr_reg;
+ /*
+ * Create list of matching SCSI Initiator Port registrations
+ * for ALL_TG_PT=1
+ */
+ spin_lock(&dev->se_port_lock);
+ list_for_each_entry_safe(port, port_tmp, &dev->dev_sep_list, sep_list) {
+ atomic_inc(&port->sep_tg_pt_ref_cnt);
+ smp_mb__after_atomic_inc();
+ spin_unlock(&dev->se_port_lock);
+
+ spin_lock_bh(&port->sep_alua_lock);
+ list_for_each_entry(deve_tmp, &port->sep_alua_list,
+ alua_port_list) {
+ /*
+ * This pointer will be NULL for demo mode MappedLUNs
+ * that have not been make explict via a ConfigFS
+ * MappedLUN group for the SCSI Initiator Node ACL.
+ */
+ if (!(deve_tmp->se_lun_acl))
+ continue;
+
+ nacl_tmp = deve_tmp->se_lun_acl->se_lun_nacl;
+ /*
+ * Skip the matching struct se_node_acl that is allocated
+ * above..
+ */
+ if (nacl == nacl_tmp)
+ continue;
+ /*
+ * Only perform PR registrations for target ports on
+ * the same fabric module as the REGISTER w/ ALL_TG_PT=1
+ * arrived.
+ */
+ if (tfo != nacl_tmp->se_tpg->se_tpg_tfo)
+ continue;
+ /*
+ * Look for a matching Initiator Node ACL in ASCII format
+ */
+ if (strcmp(nacl->initiatorname, nacl_tmp->initiatorname))
+ continue;
+
+ atomic_inc(&deve_tmp->pr_ref_count);
+ smp_mb__after_atomic_inc();
+ spin_unlock_bh(&port->sep_alua_lock);
+ /*
+ * Grab a configfs group dependency that is released
+ * for the exception path at label out: below, or upon
+ * completion of adding ALL_TG_PT=1 registrations in
+ * __core_scsi3_add_registration()
+ */
+ ret = core_scsi3_lunacl_depend_item(deve_tmp);
+ if (ret < 0) {
+ printk(KERN_ERR "core_scsi3_lunacl_depend"
+ "_item() failed\n");
+ atomic_dec(&port->sep_tg_pt_ref_cnt);
+ smp_mb__after_atomic_dec();
+ atomic_dec(&deve_tmp->pr_ref_count);
+ smp_mb__after_atomic_dec();
+ goto out;
+ }
+ /*
+ * Located a matching SCSI Initiator Port on a different
+ * port, allocate the pr_reg_atp and attach it to the
+ * pr_reg->pr_reg_atp_list that will be processed once
+ * the original *pr_reg is processed in
+ * __core_scsi3_add_registration()
+ */
+ pr_reg_atp = __core_scsi3_do_alloc_registration(dev,
+ nacl_tmp, deve_tmp, NULL,
+ sa_res_key, all_tg_pt, aptpl);
+ if (!(pr_reg_atp)) {
+ atomic_dec(&port->sep_tg_pt_ref_cnt);
+ smp_mb__after_atomic_dec();
+ atomic_dec(&deve_tmp->pr_ref_count);
+ smp_mb__after_atomic_dec();
+ core_scsi3_lunacl_undepend_item(deve_tmp);
+ goto out;
+ }
+
+ list_add_tail(&pr_reg_atp->pr_reg_atp_mem_list,
+ &pr_reg->pr_reg_atp_list);
+ spin_lock_bh(&port->sep_alua_lock);
+ }
+ spin_unlock_bh(&port->sep_alua_lock);
+
+ spin_lock(&dev->se_port_lock);
+ atomic_dec(&port->sep_tg_pt_ref_cnt);
+ smp_mb__after_atomic_dec();
+ }
+ spin_unlock(&dev->se_port_lock);
+
+ return pr_reg;
+out:
+ list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe,
+ &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) {
+ list_del(&pr_reg_tmp->pr_reg_atp_mem_list);
+ core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
+ kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp);
+ }
+ kmem_cache_free(t10_pr_reg_cache, pr_reg);
+ return NULL;
+}
+
+int core_scsi3_alloc_aptpl_registration(
+ struct t10_reservation_template *pr_tmpl,
+ u64 sa_res_key,
+ unsigned char *i_port,
+ unsigned char *isid,
+ u32 mapped_lun,
+ unsigned char *t_port,
+ u16 tpgt,
+ u32 target_lun,
+ int res_holder,
+ int all_tg_pt,
+ u8 type)
+{
+ struct t10_pr_registration *pr_reg;
+
+ if (!(i_port) || !(t_port) || !(sa_res_key)) {
+ printk(KERN_ERR "Illegal parameters for APTPL registration\n");
+ return -1;
+ }
+
+ pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_KERNEL);
+ if (!(pr_reg)) {
+ printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n");
+ return -1;
+ }
+ pr_reg->pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, GFP_KERNEL);
+
+ INIT_LIST_HEAD(&pr_reg->pr_reg_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list);
+ INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list);
+ atomic_set(&pr_reg->pr_res_holders, 0);
+ pr_reg->pr_reg_nacl = NULL;
+ pr_reg->pr_reg_deve = NULL;
+ pr_reg->pr_res_mapped_lun = mapped_lun;
+ pr_reg->pr_aptpl_target_lun = target_lun;
+ pr_reg->pr_res_key = sa_res_key;
+ pr_reg->pr_reg_all_tg_pt = all_tg_pt;
+ pr_reg->pr_reg_aptpl = 1;
+ pr_reg->pr_reg_tg_pt_lun = NULL;
+ pr_reg->pr_res_scope = 0; /* Always LUN_SCOPE */
+ pr_reg->pr_res_type = type;
+ /*
+ * If an ISID value had been saved in APTPL metadata for this
+ * SCSI Initiator Port, restore it now.
+ */
+ if (isid != NULL) {
+ pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid);
+ snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid);
+ pr_reg->isid_present_at_reg = 1;
+ }
+ /*
+ * Copy the i_port and t_port information from caller.
+ */
+ snprintf(pr_reg->pr_iport, PR_APTPL_MAX_IPORT_LEN, "%s", i_port);
+ snprintf(pr_reg->pr_tport, PR_APTPL_MAX_TPORT_LEN, "%s", t_port);
+ pr_reg->pr_reg_tpgt = tpgt;
+ /*
+ * Set pr_res_holder from caller, the pr_reg who is the reservation
+ * holder will get it's pointer set in core_scsi3_aptpl_reserve() once
+ * the Initiator Node LUN ACL from the fabric module is created for
+ * this registration.
+ */
+ pr_reg->pr_res_holder = res_holder;
+
+ list_add_tail(&pr_reg->pr_reg_aptpl_list, &pr_tmpl->aptpl_reg_list);
+ printk(KERN_INFO "SPC-3 PR APTPL Successfully added registration%s from"
+ " metadata\n", (res_holder) ? "+reservation" : "");
+ return 0;
+}
+
+static void core_scsi3_aptpl_reserve(
+ struct se_device *dev,
+ struct se_portal_group *tpg,
+ struct se_node_acl *node_acl,
+ struct t10_pr_registration *pr_reg)
+{
+ char i_buf[PR_REG_ISID_ID_LEN];
+ int prf_isid;
+
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+
+ spin_lock(&dev->dev_reservation_lock);
+ dev->dev_pr_res_holder = pr_reg;
+ spin_unlock(&dev->dev_reservation_lock);
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: APTPL RESERVE created"
+ " new reservation holder TYPE: %s ALL_TG_PT: %d\n",
+ TPG_TFO(tpg)->get_fabric_name(),
+ core_scsi3_pr_dump_type(pr_reg->pr_res_type),
+ (pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+ printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n",
+ TPG_TFO(tpg)->get_fabric_name(), node_acl->initiatorname,
+ (prf_isid) ? &i_buf[0] : "");
+}
+
+static void __core_scsi3_add_registration(struct se_device *, struct se_node_acl *,
+ struct t10_pr_registration *, int, int);
+
+static int __core_scsi3_check_aptpl_registration(
+ struct se_device *dev,
+ struct se_portal_group *tpg,
+ struct se_lun *lun,
+ u32 target_lun,
+ struct se_node_acl *nacl,
+ struct se_dev_entry *deve)
+{
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ unsigned char i_port[PR_APTPL_MAX_IPORT_LEN];
+ unsigned char t_port[PR_APTPL_MAX_TPORT_LEN];
+ u16 tpgt;
+
+ memset(i_port, 0, PR_APTPL_MAX_IPORT_LEN);
+ memset(t_port, 0, PR_APTPL_MAX_TPORT_LEN);
+ /*
+ * Copy Initiator Port information from struct se_node_acl
+ */
+ snprintf(i_port, PR_APTPL_MAX_IPORT_LEN, "%s", nacl->initiatorname);
+ snprintf(t_port, PR_APTPL_MAX_TPORT_LEN, "%s",
+ TPG_TFO(tpg)->tpg_get_wwn(tpg));
+ tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg);
+ /*
+ * Look for the matching registrations+reservation from those
+ * created from APTPL metadata. Note that multiple registrations
+ * may exist for fabrics that use ISIDs in their SCSI Initiator Port
+ * TransportIDs.
+ */
+ spin_lock(&pr_tmpl->aptpl_reg_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list,
+ pr_reg_aptpl_list) {
+ if (!(strcmp(pr_reg->pr_iport, i_port)) &&
+ (pr_reg->pr_res_mapped_lun == deve->mapped_lun) &&
+ !(strcmp(pr_reg->pr_tport, t_port)) &&
+ (pr_reg->pr_reg_tpgt == tpgt) &&
+ (pr_reg->pr_aptpl_target_lun == target_lun)) {
+
+ pr_reg->pr_reg_nacl = nacl;
+ pr_reg->pr_reg_deve = deve;
+ pr_reg->pr_reg_tg_pt_lun = lun;
+
+ list_del(&pr_reg->pr_reg_aptpl_list);
+ spin_unlock(&pr_tmpl->aptpl_reg_lock);
+ /*
+ * At this point all of the pointers in *pr_reg will
+ * be setup, so go ahead and add the registration.
+ */
+
+ __core_scsi3_add_registration(dev, nacl, pr_reg, 0, 0);
+ /*
+ * If this registration is the reservation holder,
+ * make that happen now..
+ */
+ if (pr_reg->pr_res_holder)
+ core_scsi3_aptpl_reserve(dev, tpg,
+ nacl, pr_reg);
+ /*
+ * Reenable pr_aptpl_active to accept new metadata
+ * updates once the SCSI device is active again..
+ */
+ spin_lock(&pr_tmpl->aptpl_reg_lock);
+ pr_tmpl->pr_aptpl_active = 1;
+ }
+ }
+ spin_unlock(&pr_tmpl->aptpl_reg_lock);
+
+ return 0;
+}
+
+int core_scsi3_check_aptpl_registration(
+ struct se_device *dev,
+ struct se_portal_group *tpg,
+ struct se_lun *lun,
+ struct se_lun_acl *lun_acl)
+{
+ struct se_subsystem_dev *su_dev = SU_DEV(dev);
+ struct se_node_acl *nacl = lun_acl->se_lun_nacl;
+ struct se_dev_entry *deve = &nacl->device_list[lun_acl->mapped_lun];
+
+ if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS)
+ return 0;
+
+ return __core_scsi3_check_aptpl_registration(dev, tpg, lun,
+ lun->unpacked_lun, nacl, deve);
+}
+
+static void __core_scsi3_dump_registration(
+ struct target_core_fabric_ops *tfo,
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ struct t10_pr_registration *pr_reg,
+ int register_type)
+{
+ struct se_portal_group *se_tpg = nacl->se_tpg;
+ char i_buf[PR_REG_ISID_ID_LEN];
+ int prf_isid;
+
+ memset(&i_buf[0], 0, PR_REG_ISID_ID_LEN);
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER%s Initiator"
+ " Node: %s%s\n", tfo->get_fabric_name(), (register_type == 2) ?
+ "_AND_MOVE" : (register_type == 1) ?
+ "_AND_IGNORE_EXISTING_KEY" : "", nacl->initiatorname,
+ (prf_isid) ? i_buf : "");
+ printk(KERN_INFO "SPC-3 PR [%s] registration on Target Port: %s,0x%04x\n",
+ tfo->get_fabric_name(), tfo->tpg_get_wwn(se_tpg),
+ tfo->tpg_get_tag(se_tpg));
+ printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target"
+ " Port(s)\n", tfo->get_fabric_name(),
+ (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE",
+ TRANSPORT(dev)->name);
+ printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:"
+ " 0x%08x APTPL: %d\n", tfo->get_fabric_name(),
+ pr_reg->pr_res_key, pr_reg->pr_res_generation,
+ pr_reg->pr_reg_aptpl);
+}
+
+/*
+ * this function can be called with struct se_device->dev_reservation_lock
+ * when register_move = 1
+ */
+static void __core_scsi3_add_registration(
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ struct t10_pr_registration *pr_reg,
+ int register_type,
+ int register_move)
+{
+ struct se_subsystem_dev *su_dev = SU_DEV(dev);
+ struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo;
+ struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+
+ /*
+ * Increment PRgeneration counter for struct se_device upon a successful
+ * REGISTER, see spc4r17 section 6.3.2 READ_KEYS service action
+ *
+ * Also, when register_move = 1 for PROUT REGISTER_AND_MOVE service
+ * action, the struct se_device->dev_reservation_lock will already be held,
+ * so we do not call core_scsi3_pr_generation() which grabs the lock
+ * for the REGISTER.
+ */
+ pr_reg->pr_res_generation = (register_move) ?
+ T10_RES(su_dev)->pr_generation++ :
+ core_scsi3_pr_generation(dev);
+
+ spin_lock(&pr_tmpl->registration_lock);
+ list_add_tail(&pr_reg->pr_reg_list, &pr_tmpl->registration_list);
+ pr_reg->pr_reg_deve->def_pr_registered = 1;
+
+ __core_scsi3_dump_registration(tfo, dev, nacl, pr_reg, register_type);
+ spin_unlock(&pr_tmpl->registration_lock);
+ /*
+ * Skip extra processing for ALL_TG_PT=0 or REGISTER_AND_MOVE.
+ */
+ if (!(pr_reg->pr_reg_all_tg_pt) || (register_move))
+ return;
+ /*
+ * Walk pr_reg->pr_reg_atp_list and add registrations for ALL_TG_PT=1
+ * allocated in __core_scsi3_alloc_registration()
+ */
+ list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe,
+ &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) {
+ list_del(&pr_reg_tmp->pr_reg_atp_mem_list);
+
+ pr_reg_tmp->pr_res_generation = core_scsi3_pr_generation(dev);
+
+ spin_lock(&pr_tmpl->registration_lock);
+ list_add_tail(&pr_reg_tmp->pr_reg_list,
+ &pr_tmpl->registration_list);
+ pr_reg_tmp->pr_reg_deve->def_pr_registered = 1;
+
+ __core_scsi3_dump_registration(tfo, dev,
+ pr_reg_tmp->pr_reg_nacl, pr_reg_tmp,
+ register_type);
+ spin_unlock(&pr_tmpl->registration_lock);
+ /*
+ * Drop configfs group dependency reference from
+ * __core_scsi3_alloc_registration()
+ */
+ core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
+ }
+}
+
+static int core_scsi3_alloc_registration(
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ struct se_dev_entry *deve,
+ unsigned char *isid,
+ u64 sa_res_key,
+ int all_tg_pt,
+ int aptpl,
+ int register_type,
+ int register_move)
+{
+ struct t10_pr_registration *pr_reg;
+
+ pr_reg = __core_scsi3_alloc_registration(dev, nacl, deve, isid,
+ sa_res_key, all_tg_pt, aptpl);
+ if (!(pr_reg))
+ return -1;
+
+ __core_scsi3_add_registration(dev, nacl, pr_reg,
+ register_type, register_move);
+ return 0;
+}
+
+static struct t10_pr_registration *__core_scsi3_locate_pr_reg(
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ unsigned char *isid)
+{
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+ struct se_portal_group *tpg;
+
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+ /*
+ * First look for a matching struct se_node_acl
+ */
+ if (pr_reg->pr_reg_nacl != nacl)
+ continue;
+
+ tpg = pr_reg->pr_reg_nacl->se_tpg;
+ /*
+ * If this registration does NOT contain a fabric provided
+ * ISID, then we have found a match.
+ */
+ if (!(pr_reg->isid_present_at_reg)) {
+ /*
+ * Determine if this SCSI device server requires that
+ * SCSI Intiatior TransportID w/ ISIDs is enforced
+ * for fabric modules (iSCSI) requiring them.
+ */
+ if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) {
+ if (DEV_ATTRIB(dev)->enforce_pr_isids)
+ continue;
+ }
+ atomic_inc(&pr_reg->pr_res_holders);
+ smp_mb__after_atomic_inc();
+ spin_unlock(&pr_tmpl->registration_lock);
+ return pr_reg;
+ }
+ /*
+ * If the *pr_reg contains a fabric defined ISID for multi-value
+ * SCSI Initiator Port TransportIDs, then we expect a valid
+ * matching ISID to be provided by the local SCSI Initiator Port.
+ */
+ if (!(isid))
+ continue;
+ if (strcmp(isid, pr_reg->pr_reg_isid))
+ continue;
+
+ atomic_inc(&pr_reg->pr_res_holders);
+ smp_mb__after_atomic_inc();
+ spin_unlock(&pr_tmpl->registration_lock);
+ return pr_reg;
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+
+ return NULL;
+}
+
+static struct t10_pr_registration *core_scsi3_locate_pr_reg(
+ struct se_device *dev,
+ struct se_node_acl *nacl,
+ struct se_session *sess)
+{
+ struct se_portal_group *tpg = nacl->se_tpg;
+ unsigned char buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
+
+ if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) {
+ memset(&buf[0], 0, PR_REG_ISID_LEN);
+ TPG_TFO(tpg)->sess_get_initiator_sid(sess, &buf[0],
+ PR_REG_ISID_LEN);
+ isid_ptr = &buf[0];
+ }
+
+ return __core_scsi3_locate_pr_reg(dev, nacl, isid_ptr);
+}
+
+static void core_scsi3_put_pr_reg(struct t10_pr_registration *pr_reg)
+{
+ atomic_dec(&pr_reg->pr_res_holders);
+ smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_check_implict_release(
+ struct se_device *dev,
+ struct t10_pr_registration *pr_reg)
+{
+ struct se_node_acl *nacl = pr_reg->pr_reg_nacl;
+ struct t10_pr_registration *pr_res_holder;
+ int ret = 0;
+
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if (!(pr_res_holder)) {
+ spin_unlock(&dev->dev_reservation_lock);
+ return ret;
+ }
+ if (pr_res_holder == pr_reg) {
+ /*
+ * Perform an implict RELEASE if the registration that
+ * is being released is holding the reservation.
+ *
+ * From spc4r17, section 5.7.11.1:
+ *
+ * e) If the I_T nexus is the persistent reservation holder
+ * and the persistent reservation is not an all registrants
+ * type, then a PERSISTENT RESERVE OUT command with REGISTER
+ * service action or REGISTER AND IGNORE EXISTING KEY
+ * service action with the SERVICE ACTION RESERVATION KEY
+ * field set to zero (see 5.7.11.3).
+ */
+ __core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0);
+ ret = 1;
+ /*
+ * For 'All Registrants' reservation types, all existing
+ * registrations are still processed as reservation holders
+ * in core_scsi3_pr_seq_non_holder() after the initial
+ * reservation holder is implictly released here.
+ */
+ } else if (pr_reg->pr_reg_all_tg_pt &&
+ (!strcmp(pr_res_holder->pr_reg_nacl->initiatorname,
+ pr_reg->pr_reg_nacl->initiatorname)) &&
+ (pr_res_holder->pr_res_key == pr_reg->pr_res_key)) {
+ printk(KERN_ERR "SPC-3 PR: Unable to perform ALL_TG_PT=1"
+ " UNREGISTER while existing reservation with matching"
+ " key 0x%016Lx is present from another SCSI Initiator"
+ " Port\n", pr_reg->pr_res_key);
+ ret = -1;
+ }
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return ret;
+}
+
+/*
+ * Called with struct t10_reservation_template->registration_lock held.
+ */
+static void __core_scsi3_free_registration(
+ struct se_device *dev,
+ struct t10_pr_registration *pr_reg,
+ struct list_head *preempt_and_abort_list,
+ int dec_holders)
+{
+ struct target_core_fabric_ops *tfo =
+ pr_reg->pr_reg_nacl->se_tpg->se_tpg_tfo;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ char i_buf[PR_REG_ISID_ID_LEN];
+ int prf_isid;
+
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+
+ pr_reg->pr_reg_deve->def_pr_registered = 0;
+ pr_reg->pr_reg_deve->pr_res_key = 0;
+ list_del(&pr_reg->pr_reg_list);
+ /*
+ * Caller accessing *pr_reg using core_scsi3_locate_pr_reg(),
+ * so call core_scsi3_put_pr_reg() to decrement our reference.
+ */
+ if (dec_holders)
+ core_scsi3_put_pr_reg(pr_reg);
+ /*
+ * Wait until all reference from any other I_T nexuses for this
+ * *pr_reg have been released. Because list_del() is called above,
+ * the last core_scsi3_put_pr_reg(pr_reg) will release this reference
+ * count back to zero, and we release *pr_reg.
+ */
+ while (atomic_read(&pr_reg->pr_res_holders) != 0) {
+ spin_unlock(&pr_tmpl->registration_lock);
+ printk("SPC-3 PR [%s] waiting for pr_res_holders\n",
+ tfo->get_fabric_name());
+ cpu_relax();
+ spin_lock(&pr_tmpl->registration_lock);
+ }
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: UNREGISTER Initiator"
+ " Node: %s%s\n", tfo->get_fabric_name(),
+ pr_reg->pr_reg_nacl->initiatorname,
+ (prf_isid) ? &i_buf[0] : "");
+ printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target"
+ " Port(s)\n", tfo->get_fabric_name(),
+ (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE",
+ TRANSPORT(dev)->name);
+ printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:"
+ " 0x%08x\n", tfo->get_fabric_name(), pr_reg->pr_res_key,
+ pr_reg->pr_res_generation);
+
+ if (!(preempt_and_abort_list)) {
+ pr_reg->pr_reg_deve = NULL;
+ pr_reg->pr_reg_nacl = NULL;
+ kfree(pr_reg->pr_aptpl_buf);
+ kmem_cache_free(t10_pr_reg_cache, pr_reg);
+ return;
+ }
+ /*
+ * For PREEMPT_AND_ABORT, the list of *pr_reg in preempt_and_abort_list
+ * are released once the ABORT_TASK_SET has completed..
+ */
+ list_add_tail(&pr_reg->pr_reg_abort_list, preempt_and_abort_list);
+}
+
+void core_scsi3_free_pr_reg_from_nacl(
+ struct se_device *dev,
+ struct se_node_acl *nacl)
+{
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder;
+ /*
+ * If the passed se_node_acl matches the reservation holder,
+ * release the reservation.
+ */
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if ((pr_res_holder != NULL) &&
+ (pr_res_holder->pr_reg_nacl == nacl))
+ __core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0);
+ spin_unlock(&dev->dev_reservation_lock);
+ /*
+ * Release any registration associated with the struct se_node_acl.
+ */
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+
+ if (pr_reg->pr_reg_nacl != nacl)
+ continue;
+
+ __core_scsi3_free_registration(dev, pr_reg, NULL, 0);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+}
+
+void core_scsi3_free_all_registrations(
+ struct se_device *dev)
+{
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder;
+
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if (pr_res_holder != NULL) {
+ struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+ __core_scsi3_complete_pro_release(dev, pr_res_nacl,
+ pr_res_holder, 0);
+ }
+ spin_unlock(&dev->dev_reservation_lock);
+
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+
+ __core_scsi3_free_registration(dev, pr_reg, NULL, 0);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+
+ spin_lock(&pr_tmpl->aptpl_reg_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list,
+ pr_reg_aptpl_list) {
+ list_del(&pr_reg->pr_reg_aptpl_list);
+ kfree(pr_reg->pr_aptpl_buf);
+ kmem_cache_free(t10_pr_reg_cache, pr_reg);
+ }
+ spin_unlock(&pr_tmpl->aptpl_reg_lock);
+}
+
+static int core_scsi3_tpg_depend_item(struct se_portal_group *tpg)
+{
+ return configfs_depend_item(TPG_TFO(tpg)->tf_subsys,
+ &tpg->tpg_group.cg_item);
+}
+
+static void core_scsi3_tpg_undepend_item(struct se_portal_group *tpg)
+{
+ configfs_undepend_item(TPG_TFO(tpg)->tf_subsys,
+ &tpg->tpg_group.cg_item);
+
+ atomic_dec(&tpg->tpg_pr_ref_count);
+ smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl)
+{
+ struct se_portal_group *tpg = nacl->se_tpg;
+
+ if (nacl->dynamic_node_acl)
+ return 0;
+
+ return configfs_depend_item(TPG_TFO(tpg)->tf_subsys,
+ &nacl->acl_group.cg_item);
+}
+
+static void core_scsi3_nodeacl_undepend_item(struct se_node_acl *nacl)
+{
+ struct se_portal_group *tpg = nacl->se_tpg;
+
+ if (nacl->dynamic_node_acl) {
+ atomic_dec(&nacl->acl_pr_ref_count);
+ smp_mb__after_atomic_dec();
+ return;
+ }
+
+ configfs_undepend_item(TPG_TFO(tpg)->tf_subsys,
+ &nacl->acl_group.cg_item);
+
+ atomic_dec(&nacl->acl_pr_ref_count);
+ smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve)
+{
+ struct se_lun_acl *lun_acl = se_deve->se_lun_acl;
+ struct se_node_acl *nacl;
+ struct se_portal_group *tpg;
+ /*
+ * For nacl->dynamic_node_acl=1
+ */
+ if (!(lun_acl))
+ return 0;
+
+ nacl = lun_acl->se_lun_nacl;
+ tpg = nacl->se_tpg;
+
+ return configfs_depend_item(TPG_TFO(tpg)->tf_subsys,
+ &lun_acl->se_lun_group.cg_item);
+}
+
+static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve)
+{
+ struct se_lun_acl *lun_acl = se_deve->se_lun_acl;
+ struct se_node_acl *nacl;
+ struct se_portal_group *tpg;
+ /*
+ * For nacl->dynamic_node_acl=1
+ */
+ if (!(lun_acl)) {
+ atomic_dec(&se_deve->pr_ref_count);
+ smp_mb__after_atomic_dec();
+ return;
+ }
+ nacl = lun_acl->se_lun_nacl;
+ tpg = nacl->se_tpg;
+
+ configfs_undepend_item(TPG_TFO(tpg)->tf_subsys,
+ &lun_acl->se_lun_group.cg_item);
+
+ atomic_dec(&se_deve->pr_ref_count);
+ smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_decode_spec_i_port(
+ struct se_cmd *cmd,
+ struct se_portal_group *tpg,
+ unsigned char *l_isid,
+ u64 sa_res_key,
+ int all_tg_pt,
+ int aptpl)
+{
+ struct se_device *dev = SE_DEV(cmd);
+ struct se_port *tmp_port;
+ struct se_portal_group *dest_tpg = NULL, *tmp_tpg;
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct se_node_acl *dest_node_acl = NULL;
+ struct se_dev_entry *dest_se_deve = NULL, *local_se_deve;
+ struct t10_pr_registration *dest_pr_reg, *local_pr_reg, *pr_reg_e;
+ struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe;
+ struct list_head tid_dest_list;
+ struct pr_transport_id_holder *tidh_new, *tidh, *tidh_tmp;
+ struct target_core_fabric_ops *tmp_tf_ops;
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ unsigned char *ptr, *i_str = NULL, proto_ident, tmp_proto_ident;
+ char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN];
+ u32 tpdl, tid_len = 0;
+ int ret, dest_local_nexus, prf_isid;
+ u32 dest_rtpi = 0;
+
+ memset(dest_iport, 0, 64);
+ INIT_LIST_HEAD(&tid_dest_list);
+
+ local_se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+ /*
+ * Allocate a struct pr_transport_id_holder and setup the
+ * local_node_acl and local_se_deve pointers and add to
+ * struct list_head tid_dest_list for add registration
+ * processing in the loop of tid_dest_list below.
+ */
+ tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL);
+ if (!(tidh_new)) {
+ printk(KERN_ERR "Unable to allocate tidh_new\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ INIT_LIST_HEAD(&tidh_new->dest_list);
+ tidh_new->dest_tpg = tpg;
+ tidh_new->dest_node_acl = se_sess->se_node_acl;
+ tidh_new->dest_se_deve = local_se_deve;
+
+ local_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd),
+ se_sess->se_node_acl, local_se_deve, l_isid,
+ sa_res_key, all_tg_pt, aptpl);
+ if (!(local_pr_reg)) {
+ kfree(tidh_new);
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ tidh_new->dest_pr_reg = local_pr_reg;
+ /*
+ * The local I_T nexus does not hold any configfs dependances,
+ * so we set tid_h->dest_local_nexus=1 to prevent the
+ * configfs_undepend_item() calls in the tid_dest_list loops below.
+ */
+ tidh_new->dest_local_nexus = 1;
+ list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+ /*
+ * For a PERSISTENT RESERVE OUT specify initiator ports payload,
+ * first extract TransportID Parameter Data Length, and make sure
+ * the value matches up to the SCSI expected data transfer length.
+ */
+ tpdl = (buf[24] & 0xff) << 24;
+ tpdl |= (buf[25] & 0xff) << 16;
+ tpdl |= (buf[26] & 0xff) << 8;
+ tpdl |= buf[27] & 0xff;
+
+ if ((tpdl + 28) != cmd->data_length) {
+ printk(KERN_ERR "SPC-3 PR: Illegal tpdl: %u + 28 byte header"
+ " does not equal CDB data_length: %u\n", tpdl,
+ cmd->data_length);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ /*
+ * Start processing the received transport IDs using the
+ * receiving I_T Nexus portal's fabric dependent methods to
+ * obtain the SCSI Initiator Port/Device Identifiers.
+ */
+ ptr = &buf[28];
+
+ while (tpdl > 0) {
+ proto_ident = (ptr[0] & 0x0f);
+ dest_tpg = NULL;
+
+ spin_lock(&dev->se_port_lock);
+ list_for_each_entry(tmp_port, &dev->dev_sep_list, sep_list) {
+ tmp_tpg = tmp_port->sep_tpg;
+ if (!(tmp_tpg))
+ continue;
+ tmp_tf_ops = TPG_TFO(tmp_tpg);
+ if (!(tmp_tf_ops))
+ continue;
+ if (!(tmp_tf_ops->get_fabric_proto_ident) ||
+ !(tmp_tf_ops->tpg_parse_pr_out_transport_id))
+ continue;
+ /*
+ * Look for the matching proto_ident provided by
+ * the received TransportID
+ */
+ tmp_proto_ident = tmp_tf_ops->get_fabric_proto_ident(tmp_tpg);
+ if (tmp_proto_ident != proto_ident)
+ continue;
+ dest_rtpi = tmp_port->sep_rtpi;
+
+ i_str = tmp_tf_ops->tpg_parse_pr_out_transport_id(
+ tmp_tpg, (const char *)ptr, &tid_len,
+ &iport_ptr);
+ if (!(i_str))
+ continue;
+
+ atomic_inc(&tmp_tpg->tpg_pr_ref_count);
+ smp_mb__after_atomic_inc();
+ spin_unlock(&dev->se_port_lock);
+
+ ret = core_scsi3_tpg_depend_item(tmp_tpg);
+ if (ret != 0) {
+ printk(KERN_ERR " core_scsi3_tpg_depend_item()"
+ " for tmp_tpg\n");
+ atomic_dec(&tmp_tpg->tpg_pr_ref_count);
+ smp_mb__after_atomic_dec();
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+ /*
+ * Locate the desination initiator ACL to be registered
+ * from the decoded fabric module specific TransportID
+ * at *i_str.
+ */
+ spin_lock_bh(&tmp_tpg->acl_node_lock);
+ dest_node_acl = __core_tpg_get_initiator_node_acl(
+ tmp_tpg, i_str);
+ if (dest_node_acl) {
+ atomic_inc(&dest_node_acl->acl_pr_ref_count);
+ smp_mb__after_atomic_inc();
+ }
+ spin_unlock_bh(&tmp_tpg->acl_node_lock);
+
+ if (!(dest_node_acl)) {
+ core_scsi3_tpg_undepend_item(tmp_tpg);
+ spin_lock(&dev->se_port_lock);
+ continue;
+ }
+
+ ret = core_scsi3_nodeacl_depend_item(dest_node_acl);
+ if (ret != 0) {
+ printk(KERN_ERR "configfs_depend_item() failed"
+ " for dest_node_acl->acl_group\n");
+ atomic_dec(&dest_node_acl->acl_pr_ref_count);
+ smp_mb__after_atomic_dec();
+ core_scsi3_tpg_undepend_item(tmp_tpg);
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+
+ dest_tpg = tmp_tpg;
+ printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node:"
+ " %s Port RTPI: %hu\n",
+ TPG_TFO(dest_tpg)->get_fabric_name(),
+ dest_node_acl->initiatorname, dest_rtpi);
+
+ spin_lock(&dev->se_port_lock);
+ break;
+ }
+ spin_unlock(&dev->se_port_lock);
+
+ if (!(dest_tpg)) {
+ printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Unable to locate"
+ " dest_tpg\n");
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+#if 0
+ printk("SPC-3 PR SPEC_I_PT: Got %s data_length: %u tpdl: %u"
+ " tid_len: %d for %s + %s\n",
+ TPG_TFO(dest_tpg)->get_fabric_name(), cmd->data_length,
+ tpdl, tid_len, i_str, iport_ptr);
+#endif
+ if (tid_len > tpdl) {
+ printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Illegal tid_len:"
+ " %u for Transport ID: %s\n", tid_len, ptr);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ /*
+ * Locate the desintation struct se_dev_entry pointer for matching
+ * RELATIVE TARGET PORT IDENTIFIER on the receiving I_T Nexus
+ * Target Port.
+ */
+ dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl,
+ dest_rtpi);
+ if (!(dest_se_deve)) {
+ printk(KERN_ERR "Unable to locate %s dest_se_deve"
+ " from destination RTPI: %hu\n",
+ TPG_TFO(dest_tpg)->get_fabric_name(),
+ dest_rtpi);
+
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+
+ ret = core_scsi3_lunacl_depend_item(dest_se_deve);
+ if (ret < 0) {
+ printk(KERN_ERR "core_scsi3_lunacl_depend_item()"
+ " failed\n");
+ atomic_dec(&dest_se_deve->pr_ref_count);
+ smp_mb__after_atomic_dec();
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+#if 0
+ printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node: %s"
+ " dest_se_deve mapped_lun: %u\n",
+ TPG_TFO(dest_tpg)->get_fabric_name(),
+ dest_node_acl->initiatorname, dest_se_deve->mapped_lun);
+#endif
+ /*
+ * Skip any TransportIDs that already have a registration for
+ * this target port.
+ */
+ pr_reg_e = __core_scsi3_locate_pr_reg(dev, dest_node_acl,
+ iport_ptr);
+ if (pr_reg_e) {
+ core_scsi3_put_pr_reg(pr_reg_e);
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ ptr += tid_len;
+ tpdl -= tid_len;
+ tid_len = 0;
+ continue;
+ }
+ /*
+ * Allocate a struct pr_transport_id_holder and setup
+ * the dest_node_acl and dest_se_deve pointers for the
+ * loop below.
+ */
+ tidh_new = kzalloc(sizeof(struct pr_transport_id_holder),
+ GFP_KERNEL);
+ if (!(tidh_new)) {
+ printk(KERN_ERR "Unable to allocate tidh_new\n");
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+ INIT_LIST_HEAD(&tidh_new->dest_list);
+ tidh_new->dest_tpg = dest_tpg;
+ tidh_new->dest_node_acl = dest_node_acl;
+ tidh_new->dest_se_deve = dest_se_deve;
+
+ /*
+ * Allocate, but do NOT add the registration for the
+ * TransportID referenced SCSI Initiator port. This
+ * done because of the following from spc4r17 in section
+ * 6.14.3 wrt SPEC_I_PT:
+ *
+ * "If a registration fails for any initiator port (e.g., if th
+ * logical unit does not have enough resources available to
+ * hold the registration information), no registrations shall be
+ * made, and the command shall be terminated with
+ * CHECK CONDITION status."
+ *
+ * That means we call __core_scsi3_alloc_registration() here,
+ * and then call __core_scsi3_add_registration() in the
+ * 2nd loop which will never fail.
+ */
+ dest_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd),
+ dest_node_acl, dest_se_deve, iport_ptr,
+ sa_res_key, all_tg_pt, aptpl);
+ if (!(dest_pr_reg)) {
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ kfree(tidh_new);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ tidh_new->dest_pr_reg = dest_pr_reg;
+ list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+
+ ptr += tid_len;
+ tpdl -= tid_len;
+ tid_len = 0;
+
+ }
+ /*
+ * Go ahead and create a registrations from tid_dest_list for the
+ * SPEC_I_PT provided TransportID for the *tidh referenced dest_node_acl
+ * and dest_se_deve.
+ *
+ * The SA Reservation Key from the PROUT is set for the
+ * registration, and ALL_TG_PT is also passed. ALL_TG_PT=1
+ * means that the TransportID Initiator port will be
+ * registered on all of the target ports in the SCSI target device
+ * ALL_TG_PT=0 means the registration will only be for the
+ * SCSI target port the PROUT REGISTER with SPEC_I_PT=1
+ * was received.
+ */
+ list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) {
+ dest_tpg = tidh->dest_tpg;
+ dest_node_acl = tidh->dest_node_acl;
+ dest_se_deve = tidh->dest_se_deve;
+ dest_pr_reg = tidh->dest_pr_reg;
+ dest_local_nexus = tidh->dest_local_nexus;
+
+ list_del(&tidh->dest_list);
+ kfree(tidh);
+
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+ prf_isid = core_pr_dump_initiator_port(dest_pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+
+ __core_scsi3_add_registration(SE_DEV(cmd), dest_node_acl,
+ dest_pr_reg, 0, 0);
+
+ printk(KERN_INFO "SPC-3 PR [%s] SPEC_I_PT: Successfully"
+ " registered Transport ID for Node: %s%s Mapped LUN:"
+ " %u\n", TPG_TFO(dest_tpg)->get_fabric_name(),
+ dest_node_acl->initiatorname, (prf_isid) ?
+ &i_buf[0] : "", dest_se_deve->mapped_lun);
+
+ if (dest_local_nexus)
+ continue;
+
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ }
+
+ return 0;
+out:
+ /*
+ * For the failure case, release everything from tid_dest_list
+ * including *dest_pr_reg and the configfs dependances..
+ */
+ list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) {
+ dest_tpg = tidh->dest_tpg;
+ dest_node_acl = tidh->dest_node_acl;
+ dest_se_deve = tidh->dest_se_deve;
+ dest_pr_reg = tidh->dest_pr_reg;
+ dest_local_nexus = tidh->dest_local_nexus;
+
+ list_del(&tidh->dest_list);
+ kfree(tidh);
+ /*
+ * Release any extra ALL_TG_PT=1 registrations for
+ * the SPEC_I_PT=1 case.
+ */
+ list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe,
+ &dest_pr_reg->pr_reg_atp_list,
+ pr_reg_atp_mem_list) {
+ list_del(&pr_reg_tmp->pr_reg_atp_mem_list);
+ core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
+ kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp);
+ }
+
+ kfree(dest_pr_reg->pr_aptpl_buf);
+ kmem_cache_free(t10_pr_reg_cache, dest_pr_reg);
+
+ if (dest_local_nexus)
+ continue;
+
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_tpg);
+ }
+ return ret;
+}
+
+/*
+ * Called with struct se_device->dev_reservation_lock held
+ */
+static int __core_scsi3_update_aptpl_buf(
+ struct se_device *dev,
+ unsigned char *buf,
+ u32 pr_aptpl_buf_len,
+ int clear_aptpl_metadata)
+{
+ struct se_lun *lun;
+ struct se_portal_group *tpg;
+ struct se_subsystem_dev *su_dev = SU_DEV(dev);
+ struct t10_pr_registration *pr_reg;
+ unsigned char tmp[1024], isid_buf[32];
+ ssize_t len = 0;
+ int reg_count = 0;
+
+ memset(buf, 0, pr_aptpl_buf_len);
+ /*
+ * Called to clear metadata once APTPL has been deactivated.
+ */
+ if (clear_aptpl_metadata) {
+ snprintf(buf, pr_aptpl_buf_len,
+ "No Registrations or Reservations\n");
+ return 0;
+ }
+ /*
+ * Walk the registration list..
+ */
+ spin_lock(&T10_RES(su_dev)->registration_lock);
+ list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list,
+ pr_reg_list) {
+
+ memset(tmp, 0, 1024);
+ memset(isid_buf, 0, 32);
+ tpg = pr_reg->pr_reg_nacl->se_tpg;
+ lun = pr_reg->pr_reg_tg_pt_lun;
+ /*
+ * Write out any ISID value to APTPL metadata that was included
+ * in the original registration.
+ */
+ if (pr_reg->isid_present_at_reg)
+ snprintf(isid_buf, 32, "initiator_sid=%s\n",
+ pr_reg->pr_reg_isid);
+ /*
+ * Include special metadata if the pr_reg matches the
+ * reservation holder.
+ */
+ if (dev->dev_pr_res_holder == pr_reg) {
+ snprintf(tmp, 1024, "PR_REG_START: %d"
+ "\ninitiator_fabric=%s\n"
+ "initiator_node=%s\n%s"
+ "sa_res_key=%llu\n"
+ "res_holder=1\nres_type=%02x\n"
+ "res_scope=%02x\nres_all_tg_pt=%d\n"
+ "mapped_lun=%u\n", reg_count,
+ TPG_TFO(tpg)->get_fabric_name(),
+ pr_reg->pr_reg_nacl->initiatorname, isid_buf,
+ pr_reg->pr_res_key, pr_reg->pr_res_type,
+ pr_reg->pr_res_scope, pr_reg->pr_reg_all_tg_pt,
+ pr_reg->pr_res_mapped_lun);
+ } else {
+ snprintf(tmp, 1024, "PR_REG_START: %d\n"
+ "initiator_fabric=%s\ninitiator_node=%s\n%s"
+ "sa_res_key=%llu\nres_holder=0\n"
+ "res_all_tg_pt=%d\nmapped_lun=%u\n",
+ reg_count, TPG_TFO(tpg)->get_fabric_name(),
+ pr_reg->pr_reg_nacl->initiatorname, isid_buf,
+ pr_reg->pr_res_key, pr_reg->pr_reg_all_tg_pt,
+ pr_reg->pr_res_mapped_lun);
+ }
+
+ if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+ printk(KERN_ERR "Unable to update renaming"
+ " APTPL metadata\n");
+ spin_unlock(&T10_RES(su_dev)->registration_lock);
+ return -1;
+ }
+ len += sprintf(buf+len, "%s", tmp);
+
+ /*
+ * Include information about the associated SCSI target port.
+ */
+ snprintf(tmp, 1024, "target_fabric=%s\ntarget_node=%s\n"
+ "tpgt=%hu\nport_rtpi=%hu\ntarget_lun=%u\nPR_REG_END:"
+ " %d\n", TPG_TFO(tpg)->get_fabric_name(),
+ TPG_TFO(tpg)->tpg_get_wwn(tpg),
+ TPG_TFO(tpg)->tpg_get_tag(tpg),
+ lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count);
+
+ if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+ printk(KERN_ERR "Unable to update renaming"
+ " APTPL metadata\n");
+ spin_unlock(&T10_RES(su_dev)->registration_lock);
+ return -1;
+ }
+ len += sprintf(buf+len, "%s", tmp);
+ reg_count++;
+ }
+ spin_unlock(&T10_RES(su_dev)->registration_lock);
+
+ if (!(reg_count))
+ len += sprintf(buf+len, "No Registrations or Reservations");
+
+ return 0;
+}
+
+static int core_scsi3_update_aptpl_buf(
+ struct se_device *dev,
+ unsigned char *buf,
+ u32 pr_aptpl_buf_len,
+ int clear_aptpl_metadata)
+{
+ int ret;
+
+ spin_lock(&dev->dev_reservation_lock);
+ ret = __core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len,
+ clear_aptpl_metadata);
+ spin_unlock(&dev->dev_reservation_lock);
+
+ return ret;
+}
+
+/*
+ * Called with struct se_device->aptpl_file_mutex held
+ */
+static int __core_scsi3_write_aptpl_to_file(
+ struct se_device *dev,
+ unsigned char *buf,
+ u32 pr_aptpl_buf_len)
+{
+ struct t10_wwn *wwn = &SU_DEV(dev)->t10_wwn;
+ struct file *file;
+ struct iovec iov[1];
+ mm_segment_t old_fs;
+ int flags = O_RDWR | O_CREAT | O_TRUNC;
+ char path[512];
+ int ret;
+
+ memset(iov, 0, sizeof(struct iovec));
+ memset(path, 0, 512);
+
+ if (strlen(&wwn->unit_serial[0]) > 512) {
+ printk(KERN_ERR "WWN value for struct se_device does not fit"
+ " into path buffer\n");
+ return -1;
+ }
+
+ snprintf(path, 512, "/var/target/pr/aptpl_%s", &wwn->unit_serial[0]);
+ file = filp_open(path, flags, 0600);
+ if (IS_ERR(file) || !file || !file->f_dentry) {
+ printk(KERN_ERR "filp_open(%s) for APTPL metadata"
+ " failed\n", path);
+ return -1;
+ }
+
+ iov[0].iov_base = &buf[0];
+ if (!(pr_aptpl_buf_len))
+ iov[0].iov_len = (strlen(&buf[0]) + 1); /* Add extra for NULL */
+ else
+ iov[0].iov_len = pr_aptpl_buf_len;
+
+ old_fs = get_fs();
+ set_fs(get_ds());
+ ret = vfs_writev(file, &iov[0], 1, &file->f_pos);
+ set_fs(old_fs);
+
+ if (ret < 0) {
+ printk("Error writing APTPL metadata file: %s\n", path);
+ filp_close(file, NULL);
+ return -1;
+ }
+ filp_close(file, NULL);
+
+ return 0;
+}
+
+static int core_scsi3_update_and_write_aptpl(
+ struct se_device *dev,
+ unsigned char *in_buf,
+ u32 in_pr_aptpl_buf_len)
+{
+ unsigned char null_buf[64], *buf;
+ u32 pr_aptpl_buf_len;
+ int ret, clear_aptpl_metadata = 0;
+ /*
+ * Can be called with a NULL pointer from PROUT service action CLEAR
+ */
+ if (!(in_buf)) {
+ memset(null_buf, 0, 64);
+ buf = &null_buf[0];
+ /*
+ * This will clear the APTPL metadata to:
+ * "No Registrations or Reservations" status
+ */
+ pr_aptpl_buf_len = 64;
+ clear_aptpl_metadata = 1;
+ } else {
+ buf = in_buf;
+ pr_aptpl_buf_len = in_pr_aptpl_buf_len;
+ }
+
+ ret = core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len,
+ clear_aptpl_metadata);
+ if (ret != 0)
+ return -1;
+ /*
+ * __core_scsi3_write_aptpl_to_file() will call strlen()
+ * on the passed buf to determine pr_aptpl_buf_len.
+ */
+ ret = __core_scsi3_write_aptpl_to_file(dev, buf, 0);
+ if (ret != 0)
+ return -1;
+
+ return ret;
+}
+
+static int core_scsi3_emulate_pro_register(
+ struct se_cmd *cmd,
+ u64 res_key,
+ u64 sa_res_key,
+ int aptpl,
+ int all_tg_pt,
+ int spec_i_pt,
+ int ignore_key)
+{
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct se_device *dev = SE_DEV(cmd);
+ struct se_dev_entry *se_deve;
+ struct se_lun *se_lun = SE_LUN(cmd);
+ struct se_portal_group *se_tpg;
+ struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp, *pr_reg_e;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ /* Used for APTPL metadata w/ UNREGISTER */
+ unsigned char *pr_aptpl_buf = NULL;
+ unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
+ int pr_holder = 0, ret = 0, type;
+
+ if (!(se_sess) || !(se_lun)) {
+ printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ se_tpg = se_sess->se_tpg;
+ se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+
+ if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) {
+ memset(&isid_buf[0], 0, PR_REG_ISID_LEN);
+ TPG_TFO(se_tpg)->sess_get_initiator_sid(se_sess, &isid_buf[0],
+ PR_REG_ISID_LEN);
+ isid_ptr = &isid_buf[0];
+ }
+ /*
+ * Follow logic from spc4r17 Section 5.7.7, Register Behaviors Table 47
+ */
+ pr_reg_e = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess);
+ if (!(pr_reg_e)) {
+ if (res_key) {
+ printk(KERN_WARNING "SPC-3 PR: Reservation Key non-zero"
+ " for SA REGISTER, returning CONFLICT\n");
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * Do nothing but return GOOD status.
+ */
+ if (!(sa_res_key))
+ return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+
+ if (!(spec_i_pt)) {
+ /*
+ * Perform the Service Action REGISTER on the Initiator
+ * Port Endpoint that the PRO was received from on the
+ * Logical Unit of the SCSI device server.
+ */
+ ret = core_scsi3_alloc_registration(SE_DEV(cmd),
+ se_sess->se_node_acl, se_deve, isid_ptr,
+ sa_res_key, all_tg_pt, aptpl,
+ ignore_key, 0);
+ if (ret != 0) {
+ printk(KERN_ERR "Unable to allocate"
+ " struct t10_pr_registration\n");
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ } else {
+ /*
+ * Register both the Initiator port that received
+ * PROUT SA REGISTER + SPEC_I_PT=1 and extract SCSI
+ * TransportID from Parameter list and loop through
+ * fabric dependent parameter list while calling
+ * logic from of core_scsi3_alloc_registration() for
+ * each TransportID provided SCSI Initiator Port/Device
+ */
+ ret = core_scsi3_decode_spec_i_port(cmd, se_tpg,
+ isid_ptr, sa_res_key, all_tg_pt, aptpl);
+ if (ret != 0)
+ return ret;
+ }
+ /*
+ * Nothing left to do for the APTPL=0 case.
+ */
+ if (!(aptpl)) {
+ pr_tmpl->pr_aptpl_active = 0;
+ core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0);
+ printk("SPC-3 PR: Set APTPL Bit Deactivated for"
+ " REGISTER\n");
+ return 0;
+ }
+ /*
+ * Locate the newly allocated local I_T Nexus *pr_reg, and
+ * update the APTPL metadata information using its
+ * preallocated *pr_reg->pr_aptpl_buf.
+ */
+ pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd),
+ se_sess->se_node_acl, se_sess);
+
+ ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+ &pr_reg->pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret)) {
+ pr_tmpl->pr_aptpl_active = 1;
+ printk("SPC-3 PR: Set APTPL Bit Activated for REGISTER\n");
+ }
+
+ core_scsi3_put_pr_reg(pr_reg);
+ return ret;
+ } else {
+ /*
+ * Locate the existing *pr_reg via struct se_node_acl pointers
+ */
+ pr_reg = pr_reg_e;
+ type = pr_reg->pr_res_type;
+
+ if (!(ignore_key)) {
+ if (res_key != pr_reg->pr_res_key) {
+ printk(KERN_ERR "SPC-3 PR REGISTER: Received"
+ " res_key: 0x%016Lx does not match"
+ " existing SA REGISTER res_key:"
+ " 0x%016Lx\n", res_key,
+ pr_reg->pr_res_key);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ }
+ if (spec_i_pt) {
+ printk(KERN_ERR "SPC-3 PR UNREGISTER: SPEC_I_PT"
+ " set while sa_res_key=0\n");
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ /*
+ * An existing ALL_TG_PT=1 registration being released
+ * must also set ALL_TG_PT=1 in the incoming PROUT.
+ */
+ if (pr_reg->pr_reg_all_tg_pt && !(all_tg_pt)) {
+ printk(KERN_ERR "SPC-3 PR UNREGISTER: ALL_TG_PT=1"
+ " registration exists, but ALL_TG_PT=1 bit not"
+ " present in received PROUT\n");
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+ /*
+ * Allocate APTPL metadata buffer used for UNREGISTER ops
+ */
+ if (aptpl) {
+ pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len,
+ GFP_KERNEL);
+ if (!(pr_aptpl_buf)) {
+ printk(KERN_ERR "Unable to allocate"
+ " pr_aptpl_buf\n");
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ }
+ /*
+ * sa_res_key=0 Unregister Reservation Key for registered I_T
+ * Nexus sa_res_key=1 Change Reservation Key for registered I_T
+ * Nexus.
+ */
+ if (!(sa_res_key)) {
+ pr_holder = core_scsi3_check_implict_release(
+ SE_DEV(cmd), pr_reg);
+ if (pr_holder < 0) {
+ kfree(pr_aptpl_buf);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+
+ spin_lock(&pr_tmpl->registration_lock);
+ /*
+ * Release all ALL_TG_PT=1 for the matching SCSI Initiator Port
+ * and matching pr_res_key.
+ */
+ if (pr_reg->pr_reg_all_tg_pt) {
+ list_for_each_entry_safe(pr_reg_p, pr_reg_tmp,
+ &pr_tmpl->registration_list,
+ pr_reg_list) {
+
+ if (!(pr_reg_p->pr_reg_all_tg_pt))
+ continue;
+
+ if (pr_reg_p->pr_res_key != res_key)
+ continue;
+
+ if (pr_reg == pr_reg_p)
+ continue;
+
+ if (strcmp(pr_reg->pr_reg_nacl->initiatorname,
+ pr_reg_p->pr_reg_nacl->initiatorname))
+ continue;
+
+ __core_scsi3_free_registration(dev,
+ pr_reg_p, NULL, 0);
+ }
+ }
+ /*
+ * Release the calling I_T Nexus registration now..
+ */
+ __core_scsi3_free_registration(SE_DEV(cmd), pr_reg,
+ NULL, 1);
+ /*
+ * From spc4r17, section 5.7.11.3 Unregistering
+ *
+ * If the persistent reservation is a registrants only
+ * type, the device server shall establish a unit
+ * attention condition for the initiator port associated
+ * with every registered I_T nexus except for the I_T
+ * nexus on which the PERSISTENT RESERVE OUT command was
+ * received, with the additional sense code set to
+ * RESERVATIONS RELEASED.
+ */
+ if (pr_holder &&
+ ((type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
+ (type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY))) {
+ list_for_each_entry(pr_reg_p,
+ &pr_tmpl->registration_list,
+ pr_reg_list) {
+
+ core_scsi3_ua_allocate(
+ pr_reg_p->pr_reg_nacl,
+ pr_reg_p->pr_res_mapped_lun,
+ 0x2A,
+ ASCQ_2AH_RESERVATIONS_RELEASED);
+ }
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+
+ if (!(aptpl)) {
+ pr_tmpl->pr_aptpl_active = 0;
+ core_scsi3_update_and_write_aptpl(dev, NULL, 0);
+ printk("SPC-3 PR: Set APTPL Bit Deactivated"
+ " for UNREGISTER\n");
+ return 0;
+ }
+
+ ret = core_scsi3_update_and_write_aptpl(dev,
+ &pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret)) {
+ pr_tmpl->pr_aptpl_active = 1;
+ printk("SPC-3 PR: Set APTPL Bit Activated"
+ " for UNREGISTER\n");
+ }
+
+ kfree(pr_aptpl_buf);
+ return ret;
+ } else {
+ /*
+ * Increment PRgeneration counter for struct se_device"
+ * upon a successful REGISTER, see spc4r17 section 6.3.2
+ * READ_KEYS service action.
+ */
+ pr_reg->pr_res_generation = core_scsi3_pr_generation(
+ SE_DEV(cmd));
+ pr_reg->pr_res_key = sa_res_key;
+ printk("SPC-3 PR [%s] REGISTER%s: Changed Reservation"
+ " Key for %s to: 0x%016Lx PRgeneration:"
+ " 0x%08x\n", CMD_TFO(cmd)->get_fabric_name(),
+ (ignore_key) ? "_AND_IGNORE_EXISTING_KEY" : "",
+ pr_reg->pr_reg_nacl->initiatorname,
+ pr_reg->pr_res_key, pr_reg->pr_res_generation);
+
+ if (!(aptpl)) {
+ pr_tmpl->pr_aptpl_active = 0;
+ core_scsi3_update_and_write_aptpl(dev, NULL, 0);
+ printk("SPC-3 PR: Set APTPL Bit Deactivated"
+ " for REGISTER\n");
+ return 0;
+ }
+
+ ret = core_scsi3_update_and_write_aptpl(dev,
+ &pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret)) {
+ pr_tmpl->pr_aptpl_active = 1;
+ printk("SPC-3 PR: Set APTPL Bit Activated"
+ " for REGISTER\n");
+ }
+
+ kfree(pr_aptpl_buf);
+ core_scsi3_put_pr_reg(pr_reg);
+ }
+ }
+ return 0;
+}
+
+unsigned char *core_scsi3_pr_dump_type(int type)
+{
+ switch (type) {
+ case PR_TYPE_WRITE_EXCLUSIVE:
+ return "Write Exclusive Access";
+ case PR_TYPE_EXCLUSIVE_ACCESS:
+ return "Exclusive Access";
+ case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+ return "Write Exclusive Access, Registrants Only";
+ case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+ return "Exclusive Access, Registrants Only";
+ case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+ return "Write Exclusive Access, All Registrants";
+ case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+ return "Exclusive Access, All Registrants";
+ default:
+ break;
+ }
+
+ return "Unknown SPC-3 PR Type";
+}
+
+static int core_scsi3_pro_reserve(
+ struct se_cmd *cmd,
+ struct se_device *dev,
+ int type,
+ int scope,
+ u64 res_key)
+{
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct se_dev_entry *se_deve;
+ struct se_lun *se_lun = SE_LUN(cmd);
+ struct se_portal_group *se_tpg;
+ struct t10_pr_registration *pr_reg, *pr_res_holder;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ char i_buf[PR_REG_ISID_ID_LEN];
+ int ret, prf_isid;
+
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+
+ if (!(se_sess) || !(se_lun)) {
+ printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ se_tpg = se_sess->se_tpg;
+ se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+ /*
+ * Locate the existing *pr_reg via struct se_node_acl pointers
+ */
+ pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl,
+ se_sess);
+ if (!(pr_reg)) {
+ printk(KERN_ERR "SPC-3 PR: Unable to locate"
+ " PR_REGISTERED *pr_reg for RESERVE\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ /*
+ * From spc4r17 Section 5.7.9: Reserving:
+ *
+ * An application client creates a persistent reservation by issuing
+ * a PERSISTENT RESERVE OUT command with RESERVE service action through
+ * a registered I_T nexus with the following parameters:
+ * a) RESERVATION KEY set to the value of the reservation key that is
+ * registered with the logical unit for the I_T nexus; and
+ */
+ if (res_key != pr_reg->pr_res_key) {
+ printk(KERN_ERR "SPC-3 PR RESERVE: Received res_key: 0x%016Lx"
+ " does not match existing SA REGISTER res_key:"
+ " 0x%016Lx\n", res_key, pr_reg->pr_res_key);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * From spc4r17 Section 5.7.9: Reserving:
+ *
+ * From above:
+ * b) TYPE field and SCOPE field set to the persistent reservation
+ * being created.
+ *
+ * Only one persistent reservation is allowed at a time per logical unit
+ * and that persistent reservation has a scope of LU_SCOPE.
+ */
+ if (scope != PR_SCOPE_LU_SCOPE) {
+ printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ /*
+ * See if we have an existing PR reservation holder pointer at
+ * struct se_device->dev_pr_res_holder in the form struct t10_pr_registration
+ * *pr_res_holder.
+ */
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if ((pr_res_holder)) {
+ /*
+ * From spc4r17 Section 5.7.9: Reserving:
+ *
+ * If the device server receives a PERSISTENT RESERVE OUT
+ * command from an I_T nexus other than a persistent reservation
+ * holder (see 5.7.10) that attempts to create a persistent
+ * reservation when a persistent reservation already exists for
+ * the logical unit, then the command shall be completed with
+ * RESERVATION CONFLICT status.
+ */
+ if (pr_res_holder != pr_reg) {
+ struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+ printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from"
+ " [%s]: %s while reservation already held by"
+ " [%s]: %s, returning RESERVATION_CONFLICT\n",
+ CMD_TFO(cmd)->get_fabric_name(),
+ se_sess->se_node_acl->initiatorname,
+ TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(),
+ pr_res_holder->pr_reg_nacl->initiatorname);
+
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * From spc4r17 Section 5.7.9: Reserving:
+ *
+ * If a persistent reservation holder attempts to modify the
+ * type or scope of an existing persistent reservation, the
+ * command shall be completed with RESERVATION CONFLICT status.
+ */
+ if ((pr_res_holder->pr_res_type != type) ||
+ (pr_res_holder->pr_res_scope != scope)) {
+ struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+ printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from"
+ " [%s]: %s trying to change TYPE and/or SCOPE,"
+ " while reservation already held by [%s]: %s,"
+ " returning RESERVATION_CONFLICT\n",
+ CMD_TFO(cmd)->get_fabric_name(),
+ se_sess->se_node_acl->initiatorname,
+ TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(),
+ pr_res_holder->pr_reg_nacl->initiatorname);
+
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * From spc4r17 Section 5.7.9: Reserving:
+ *
+ * If the device server receives a PERSISTENT RESERVE OUT
+ * command with RESERVE service action where the TYPE field and
+ * the SCOPE field contain the same values as the existing type
+ * and scope from a persistent reservation holder, it shall not
+ * make any change to the existing persistent reservation and
+ * shall completethe command with GOOD status.
+ */
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+ }
+ /*
+ * Otherwise, our *pr_reg becomes the PR reservation holder for said
+ * TYPE/SCOPE. Also set the received scope and type in *pr_reg.
+ */
+ pr_reg->pr_res_scope = scope;
+ pr_reg->pr_res_type = type;
+ pr_reg->pr_res_holder = 1;
+ dev->dev_pr_res_holder = pr_reg;
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: RESERVE created new"
+ " reservation holder TYPE: %s ALL_TG_PT: %d\n",
+ CMD_TFO(cmd)->get_fabric_name(), core_scsi3_pr_dump_type(type),
+ (pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+ printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n",
+ CMD_TFO(cmd)->get_fabric_name(),
+ se_sess->se_node_acl->initiatorname,
+ (prf_isid) ? &i_buf[0] : "");
+ spin_unlock(&dev->dev_reservation_lock);
+
+ if (pr_tmpl->pr_aptpl_active) {
+ ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+ &pr_reg->pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret))
+ printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata"
+ " for RESERVE\n");
+ }
+
+ core_scsi3_put_pr_reg(pr_reg);
+ return 0;
+}
+
+static int core_scsi3_emulate_pro_reserve(
+ struct se_cmd *cmd,
+ int type,
+ int scope,
+ u64 res_key)
+{
+ struct se_device *dev = cmd->se_dev;
+ int ret = 0;
+
+ switch (type) {
+ case PR_TYPE_WRITE_EXCLUSIVE:
+ case PR_TYPE_EXCLUSIVE_ACCESS:
+ case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+ case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+ case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+ case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+ ret = core_scsi3_pro_reserve(cmd, dev, type, scope, res_key);
+ break;
+ default:
+ printk(KERN_ERR "SPC-3 PR: Unknown Service Action RESERVE Type:"
+ " 0x%02x\n", type);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ return ret;
+}
+
+/*
+ * Called with struct se_device->dev_reservation_lock held.
+ */
+static void __core_scsi3_complete_pro_release(
+ struct se_device *dev,
+ struct se_node_acl *se_nacl,
+ struct t10_pr_registration *pr_reg,
+ int explict)
+{
+ struct target_core_fabric_ops *tfo = se_nacl->se_tpg->se_tpg_tfo;
+ char i_buf[PR_REG_ISID_ID_LEN];
+ int prf_isid;
+
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+ /*
+ * Go ahead and release the current PR reservation holder.
+ */
+ dev->dev_pr_res_holder = NULL;
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: %s RELEASE cleared"
+ " reservation holder TYPE: %s ALL_TG_PT: %d\n",
+ tfo->get_fabric_name(), (explict) ? "explict" : "implict",
+ core_scsi3_pr_dump_type(pr_reg->pr_res_type),
+ (pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+ printk(KERN_INFO "SPC-3 PR [%s] RELEASE Node: %s%s\n",
+ tfo->get_fabric_name(), se_nacl->initiatorname,
+ (prf_isid) ? &i_buf[0] : "");
+ /*
+ * Clear TYPE and SCOPE for the next PROUT Service Action: RESERVE
+ */
+ pr_reg->pr_res_holder = pr_reg->pr_res_type = pr_reg->pr_res_scope = 0;
+}
+
+static int core_scsi3_emulate_pro_release(
+ struct se_cmd *cmd,
+ int type,
+ int scope,
+ u64 res_key)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct se_lun *se_lun = SE_LUN(cmd);
+ struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_res_holder;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ int ret, all_reg = 0;
+
+ if (!(se_sess) || !(se_lun)) {
+ printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ /*
+ * Locate the existing *pr_reg via struct se_node_acl pointers
+ */
+ pr_reg = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess);
+ if (!(pr_reg)) {
+ printk(KERN_ERR "SPC-3 PR: Unable to locate"
+ " PR_REGISTERED *pr_reg for RELEASE\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ /*
+ * From spc4r17 Section 5.7.11.2 Releasing:
+ *
+ * If there is no persistent reservation or in response to a persistent
+ * reservation release request from a registered I_T nexus that is not a
+ * persistent reservation holder (see 5.7.10), the device server shall
+ * do the following:
+ *
+ * a) Not release the persistent reservation, if any;
+ * b) Not remove any registrations; and
+ * c) Complete the command with GOOD status.
+ */
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if (!(pr_res_holder)) {
+ /*
+ * No persistent reservation, return GOOD status.
+ */
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+ }
+ if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+ (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))
+ all_reg = 1;
+
+ if ((all_reg == 0) && (pr_res_holder != pr_reg)) {
+ /*
+ * Non 'All Registrants' PR Type cases..
+ * Release request from a registered I_T nexus that is not a
+ * persistent reservation holder. return GOOD status.
+ */
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+ }
+ /*
+ * From spc4r17 Section 5.7.11.2 Releasing:
+ *
+ * Only the persistent reservation holder (see 5.7.10) is allowed to
+ * release a persistent reservation.
+ *
+ * An application client releases the persistent reservation by issuing
+ * a PERSISTENT RESERVE OUT command with RELEASE service action through
+ * an I_T nexus that is a persistent reservation holder with the
+ * following parameters:
+ *
+ * a) RESERVATION KEY field set to the value of the reservation key
+ * that is registered with the logical unit for the I_T nexus;
+ */
+ if (res_key != pr_reg->pr_res_key) {
+ printk(KERN_ERR "SPC-3 PR RELEASE: Received res_key: 0x%016Lx"
+ " does not match existing SA REGISTER res_key:"
+ " 0x%016Lx\n", res_key, pr_reg->pr_res_key);
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * From spc4r17 Section 5.7.11.2 Releasing and above:
+ *
+ * b) TYPE field and SCOPE field set to match the persistent
+ * reservation being released.
+ */
+ if ((pr_res_holder->pr_res_type != type) ||
+ (pr_res_holder->pr_res_scope != scope)) {
+ struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+ printk(KERN_ERR "SPC-3 PR RELEASE: Attempted to release"
+ " reservation from [%s]: %s with different TYPE "
+ "and/or SCOPE while reservation already held by"
+ " [%s]: %s, returning RESERVATION_CONFLICT\n",
+ CMD_TFO(cmd)->get_fabric_name(),
+ se_sess->se_node_acl->initiatorname,
+ TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(),
+ pr_res_holder->pr_reg_nacl->initiatorname);
+
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * In response to a persistent reservation release request from the
+ * persistent reservation holder the device server shall perform a
+ * release by doing the following as an uninterrupted series of actions:
+ * a) Release the persistent reservation;
+ * b) Not remove any registration(s);
+ * c) If the released persistent reservation is a registrants only type
+ * or all registrants type persistent reservation,
+ * the device server shall establish a unit attention condition for
+ * the initiator port associated with every regis-
+ * tered I_T nexus other than I_T nexus on which the PERSISTENT
+ * RESERVE OUT command with RELEASE service action was received,
+ * with the additional sense code set to RESERVATIONS RELEASED; and
+ * d) If the persistent reservation is of any other type, the device
+ * server shall not establish a unit attention condition.
+ */
+ __core_scsi3_complete_pro_release(dev, se_sess->se_node_acl,
+ pr_reg, 1);
+
+ spin_unlock(&dev->dev_reservation_lock);
+
+ if ((type != PR_TYPE_WRITE_EXCLUSIVE_REGONLY) &&
+ (type != PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) &&
+ (type != PR_TYPE_WRITE_EXCLUSIVE_ALLREG) &&
+ (type != PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
+ /*
+ * If no UNIT ATTENTION conditions will be established for
+ * PR_TYPE_WRITE_EXCLUSIVE or PR_TYPE_EXCLUSIVE_ACCESS
+ * go ahead and check for APTPL=1 update+write below
+ */
+ goto write_aptpl;
+ }
+
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry(pr_reg_p, &pr_tmpl->registration_list,
+ pr_reg_list) {
+ /*
+ * Do not establish a UNIT ATTENTION condition
+ * for the calling I_T Nexus
+ */
+ if (pr_reg_p == pr_reg)
+ continue;
+
+ core_scsi3_ua_allocate(pr_reg_p->pr_reg_nacl,
+ pr_reg_p->pr_res_mapped_lun,
+ 0x2A, ASCQ_2AH_RESERVATIONS_RELEASED);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+
+write_aptpl:
+ if (pr_tmpl->pr_aptpl_active) {
+ ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+ &pr_reg->pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret))
+ printk("SPC-3 PR: Updated APTPL metadata for RELEASE\n");
+ }
+
+ core_scsi3_put_pr_reg(pr_reg);
+ return 0;
+}
+
+static int core_scsi3_emulate_pro_clear(
+ struct se_cmd *cmd,
+ u64 res_key)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_node_acl *pr_reg_nacl;
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder;
+ u32 pr_res_mapped_lun = 0;
+ int calling_it_nexus = 0;
+ /*
+ * Locate the existing *pr_reg via struct se_node_acl pointers
+ */
+ pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd),
+ se_sess->se_node_acl, se_sess);
+ if (!(pr_reg_n)) {
+ printk(KERN_ERR "SPC-3 PR: Unable to locate"
+ " PR_REGISTERED *pr_reg for CLEAR\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ /*
+ * From spc4r17 section 5.7.11.6, Clearing:
+ *
+ * Any application client may release the persistent reservation and
+ * remove all registrations from a device server by issuing a
+ * PERSISTENT RESERVE OUT command with CLEAR service action through a
+ * registered I_T nexus with the following parameter:
+ *
+ * a) RESERVATION KEY field set to the value of the reservation key
+ * that is registered with the logical unit for the I_T nexus.
+ */
+ if (res_key != pr_reg_n->pr_res_key) {
+ printk(KERN_ERR "SPC-3 PR REGISTER: Received"
+ " res_key: 0x%016Lx does not match"
+ " existing SA REGISTER res_key:"
+ " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key);
+ core_scsi3_put_pr_reg(pr_reg_n);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * a) Release the persistent reservation, if any;
+ */
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if (pr_res_holder) {
+ struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+ __core_scsi3_complete_pro_release(dev, pr_res_nacl,
+ pr_res_holder, 0);
+ }
+ spin_unlock(&dev->dev_reservation_lock);
+ /*
+ * b) Remove all registration(s) (see spc4r17 5.7.7);
+ */
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+
+ calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+ pr_reg_nacl = pr_reg->pr_reg_nacl;
+ pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+ __core_scsi3_free_registration(dev, pr_reg, NULL,
+ calling_it_nexus);
+ /*
+ * e) Establish a unit attention condition for the initiator
+ * port associated with every registered I_T nexus other
+ * than the I_T nexus on which the PERSISTENT RESERVE OUT
+ * command with CLEAR service action was received, with the
+ * additional sense code set to RESERVATIONS PREEMPTED.
+ */
+ if (!(calling_it_nexus))
+ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun,
+ 0x2A, ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: CLEAR complete\n",
+ CMD_TFO(cmd)->get_fabric_name());
+
+ if (pr_tmpl->pr_aptpl_active) {
+ core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0);
+ printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata"
+ " for CLEAR\n");
+ }
+
+ core_scsi3_pr_generation(dev);
+ return 0;
+}
+
+/*
+ * Called with struct se_device->dev_reservation_lock held.
+ */
+static void __core_scsi3_complete_pro_preempt(
+ struct se_device *dev,
+ struct t10_pr_registration *pr_reg,
+ struct list_head *preempt_and_abort_list,
+ int type,
+ int scope,
+ int abort)
+{
+ struct se_node_acl *nacl = pr_reg->pr_reg_nacl;
+ struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo;
+ char i_buf[PR_REG_ISID_ID_LEN];
+ int prf_isid;
+
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+ /*
+ * Do an implict RELEASE of the existing reservation.
+ */
+ if (dev->dev_pr_res_holder)
+ __core_scsi3_complete_pro_release(dev, nacl,
+ dev->dev_pr_res_holder, 0);
+
+ dev->dev_pr_res_holder = pr_reg;
+ pr_reg->pr_res_holder = 1;
+ pr_reg->pr_res_type = type;
+ pr_reg->pr_res_scope = scope;
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: PREEMPT%s created new"
+ " reservation holder TYPE: %s ALL_TG_PT: %d\n",
+ tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "",
+ core_scsi3_pr_dump_type(type),
+ (pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+ printk(KERN_INFO "SPC-3 PR [%s] PREEMPT%s from Node: %s%s\n",
+ tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "",
+ nacl->initiatorname, (prf_isid) ? &i_buf[0] : "");
+ /*
+ * For PREEMPT_AND_ABORT, add the preempting reservation's
+ * struct t10_pr_registration to the list that will be compared
+ * against received CDBs..
+ */
+ if (preempt_and_abort_list)
+ list_add_tail(&pr_reg->pr_reg_abort_list,
+ preempt_and_abort_list);
+}
+
+static void core_scsi3_release_preempt_and_abort(
+ struct list_head *preempt_and_abort_list,
+ struct t10_pr_registration *pr_reg_holder)
+{
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list,
+ pr_reg_abort_list) {
+
+ list_del(&pr_reg->pr_reg_abort_list);
+ if (pr_reg_holder == pr_reg)
+ continue;
+ if (pr_reg->pr_res_holder) {
+ printk(KERN_WARNING "pr_reg->pr_res_holder still set\n");
+ continue;
+ }
+
+ pr_reg->pr_reg_deve = NULL;
+ pr_reg->pr_reg_nacl = NULL;
+ kfree(pr_reg->pr_aptpl_buf);
+ kmem_cache_free(t10_pr_reg_cache, pr_reg);
+ }
+}
+
+int core_scsi3_check_cdb_abort_and_preempt(
+ struct list_head *preempt_and_abort_list,
+ struct se_cmd *cmd)
+{
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list,
+ pr_reg_abort_list) {
+ if (pr_reg->pr_res_key == cmd->pr_res_key)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int core_scsi3_pro_preempt(
+ struct se_cmd *cmd,
+ int type,
+ int scope,
+ u64 res_key,
+ u64 sa_res_key,
+ int abort)
+{
+ struct se_device *dev = SE_DEV(cmd);
+ struct se_dev_entry *se_deve;
+ struct se_node_acl *pr_reg_nacl;
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct list_head preempt_and_abort_list;
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ u32 pr_res_mapped_lun = 0;
+ int all_reg = 0, calling_it_nexus = 0, released_regs = 0;
+ int prh_type = 0, prh_scope = 0, ret;
+
+ if (!(se_sess))
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+
+ se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+ pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl,
+ se_sess);
+ if (!(pr_reg_n)) {
+ printk(KERN_ERR "SPC-3 PR: Unable to locate"
+ " PR_REGISTERED *pr_reg for PREEMPT%s\n",
+ (abort) ? "_AND_ABORT" : "");
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ if (pr_reg_n->pr_res_key != res_key) {
+ core_scsi3_put_pr_reg(pr_reg_n);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ if (scope != PR_SCOPE_LU_SCOPE) {
+ printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope);
+ core_scsi3_put_pr_reg(pr_reg_n);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ INIT_LIST_HEAD(&preempt_and_abort_list);
+
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if (pr_res_holder &&
+ ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+ (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)))
+ all_reg = 1;
+
+ if (!(all_reg) && !(sa_res_key)) {
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg_n);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ /*
+ * From spc4r17, section 5.7.11.4.4 Removing Registrations:
+ *
+ * If the SERVICE ACTION RESERVATION KEY field does not identify a
+ * persistent reservation holder or there is no persistent reservation
+ * holder (i.e., there is no persistent reservation), then the device
+ * server shall perform a preempt by doing the following in an
+ * uninterrupted series of actions. (See below..)
+ */
+ if (!(pr_res_holder) || (pr_res_holder->pr_res_key != sa_res_key)) {
+ /*
+ * No existing or SA Reservation Key matching reservations..
+ *
+ * PROUT SA PREEMPT with All Registrant type reservations are
+ * allowed to be processed without a matching SA Reservation Key
+ */
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+ /*
+ * Removing of registrations in non all registrants
+ * type reservations without a matching SA reservation
+ * key.
+ *
+ * a) Remove the registrations for all I_T nexuses
+ * specified by the SERVICE ACTION RESERVATION KEY
+ * field;
+ * b) Ignore the contents of the SCOPE and TYPE fields;
+ * c) Process tasks as defined in 5.7.1; and
+ * d) Establish a unit attention condition for the
+ * initiator port associated with every I_T nexus
+ * that lost its registration other than the I_T
+ * nexus on which the PERSISTENT RESERVE OUT command
+ * was received, with the additional sense code set
+ * to REGISTRATIONS PREEMPTED.
+ */
+ if (!(all_reg)) {
+ if (pr_reg->pr_res_key != sa_res_key)
+ continue;
+
+ calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+ pr_reg_nacl = pr_reg->pr_reg_nacl;
+ pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+ __core_scsi3_free_registration(dev, pr_reg,
+ (abort) ? &preempt_and_abort_list :
+ NULL, calling_it_nexus);
+ released_regs++;
+ } else {
+ /*
+ * Case for any existing all registrants type
+ * reservation, follow logic in spc4r17 section
+ * 5.7.11.4 Preempting, Table 52 and Figure 7.
+ *
+ * For a ZERO SA Reservation key, release
+ * all other registrations and do an implict
+ * release of active persistent reservation.
+ *
+ * For a non-ZERO SA Reservation key, only
+ * release the matching reservation key from
+ * registrations.
+ */
+ if ((sa_res_key) &&
+ (pr_reg->pr_res_key != sa_res_key))
+ continue;
+
+ calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+ if (calling_it_nexus)
+ continue;
+
+ pr_reg_nacl = pr_reg->pr_reg_nacl;
+ pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+ __core_scsi3_free_registration(dev, pr_reg,
+ (abort) ? &preempt_and_abort_list :
+ NULL, 0);
+ released_regs++;
+ }
+ if (!(calling_it_nexus))
+ core_scsi3_ua_allocate(pr_reg_nacl,
+ pr_res_mapped_lun, 0x2A,
+ ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+ /*
+ * If a PERSISTENT RESERVE OUT with a PREEMPT service action or
+ * a PREEMPT AND ABORT service action sets the SERVICE ACTION
+ * RESERVATION KEY field to a value that does not match any
+ * registered reservation key, then the device server shall
+ * complete the command with RESERVATION CONFLICT status.
+ */
+ if (!(released_regs)) {
+ spin_unlock(&dev->dev_reservation_lock);
+ core_scsi3_put_pr_reg(pr_reg_n);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * For an existing all registrants type reservation
+ * with a zero SA rservation key, preempt the existing
+ * reservation with the new PR type and scope.
+ */
+ if (pr_res_holder && all_reg && !(sa_res_key)) {
+ __core_scsi3_complete_pro_preempt(dev, pr_reg_n,
+ (abort) ? &preempt_and_abort_list : NULL,
+ type, scope, abort);
+
+ if (abort)
+ core_scsi3_release_preempt_and_abort(
+ &preempt_and_abort_list, pr_reg_n);
+ }
+ spin_unlock(&dev->dev_reservation_lock);
+
+ if (pr_tmpl->pr_aptpl_active) {
+ ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+ &pr_reg_n->pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret))
+ printk(KERN_INFO "SPC-3 PR: Updated APTPL"
+ " metadata for PREEMPT%s\n", (abort) ?
+ "_AND_ABORT" : "");
+ }
+
+ core_scsi3_put_pr_reg(pr_reg_n);
+ core_scsi3_pr_generation(SE_DEV(cmd));
+ return 0;
+ }
+ /*
+ * The PREEMPTing SA reservation key matches that of the
+ * existing persistent reservation, first, we check if
+ * we are preempting our own reservation.
+ * From spc4r17, section 5.7.11.4.3 Preempting
+ * persistent reservations and registration handling
+ *
+ * If an all registrants persistent reservation is not
+ * present, it is not an error for the persistent
+ * reservation holder to preempt itself (i.e., a
+ * PERSISTENT RESERVE OUT with a PREEMPT service action
+ * or a PREEMPT AND ABORT service action with the
+ * SERVICE ACTION RESERVATION KEY value equal to the
+ * persistent reservation holder's reservation key that
+ * is received from the persistent reservation holder).
+ * In that case, the device server shall establish the
+ * new persistent reservation and maintain the
+ * registration.
+ */
+ prh_type = pr_res_holder->pr_res_type;
+ prh_scope = pr_res_holder->pr_res_scope;
+ /*
+ * If the SERVICE ACTION RESERVATION KEY field identifies a
+ * persistent reservation holder (see 5.7.10), the device
+ * server shall perform a preempt by doing the following as
+ * an uninterrupted series of actions:
+ *
+ * a) Release the persistent reservation for the holder
+ * identified by the SERVICE ACTION RESERVATION KEY field;
+ */
+ if (pr_reg_n != pr_res_holder)
+ __core_scsi3_complete_pro_release(dev,
+ pr_res_holder->pr_reg_nacl,
+ dev->dev_pr_res_holder, 0);
+ /*
+ * b) Remove the registrations for all I_T nexuses identified
+ * by the SERVICE ACTION RESERVATION KEY field, except the
+ * I_T nexus that is being used for the PERSISTENT RESERVE
+ * OUT command. If an all registrants persistent reservation
+ * is present and the SERVICE ACTION RESERVATION KEY field
+ * is set to zero, then all registrations shall be removed
+ * except for that of the I_T nexus that is being used for
+ * the PERSISTENT RESERVE OUT command;
+ */
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+
+ calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+ if (calling_it_nexus)
+ continue;
+
+ if (pr_reg->pr_res_key != sa_res_key)
+ continue;
+
+ pr_reg_nacl = pr_reg->pr_reg_nacl;
+ pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+ __core_scsi3_free_registration(dev, pr_reg,
+ (abort) ? &preempt_and_abort_list : NULL,
+ calling_it_nexus);
+ /*
+ * e) Establish a unit attention condition for the initiator
+ * port associated with every I_T nexus that lost its
+ * persistent reservation and/or registration, with the
+ * additional sense code set to REGISTRATIONS PREEMPTED;
+ */
+ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A,
+ ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+ /*
+ * c) Establish a persistent reservation for the preempting
+ * I_T nexus using the contents of the SCOPE and TYPE fields;
+ */
+ __core_scsi3_complete_pro_preempt(dev, pr_reg_n,
+ (abort) ? &preempt_and_abort_list : NULL,
+ type, scope, abort);
+ /*
+ * d) Process tasks as defined in 5.7.1;
+ * e) See above..
+ * f) If the type or scope has changed, then for every I_T nexus
+ * whose reservation key was not removed, except for the I_T
+ * nexus on which the PERSISTENT RESERVE OUT command was
+ * received, the device server shall establish a unit
+ * attention condition for the initiator port associated with
+ * that I_T nexus, with the additional sense code set to
+ * RESERVATIONS RELEASED. If the type or scope have not
+ * changed, then no unit attention condition(s) shall be
+ * established for this reason.
+ */
+ if ((prh_type != type) || (prh_scope != scope)) {
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+
+ calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+ if (calling_it_nexus)
+ continue;
+
+ core_scsi3_ua_allocate(pr_reg->pr_reg_nacl,
+ pr_reg->pr_res_mapped_lun, 0x2A,
+ ASCQ_2AH_RESERVATIONS_RELEASED);
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+ }
+ spin_unlock(&dev->dev_reservation_lock);
+ /*
+ * Call LUN_RESET logic upon list of struct t10_pr_registration,
+ * All received CDBs for the matching existing reservation and
+ * registrations undergo ABORT_TASK logic.
+ *
+ * From there, core_scsi3_release_preempt_and_abort() will
+ * release every registration in the list (which have already
+ * been removed from the primary pr_reg list), except the
+ * new persistent reservation holder, the calling Initiator Port.
+ */
+ if (abort) {
+ core_tmr_lun_reset(dev, NULL, &preempt_and_abort_list, cmd);
+ core_scsi3_release_preempt_and_abort(&preempt_and_abort_list,
+ pr_reg_n);
+ }
+
+ if (pr_tmpl->pr_aptpl_active) {
+ ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+ &pr_reg_n->pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret))
+ printk("SPC-3 PR: Updated APTPL metadata for PREEMPT"
+ "%s\n", (abort) ? "_AND_ABORT" : "");
+ }
+
+ core_scsi3_put_pr_reg(pr_reg_n);
+ core_scsi3_pr_generation(SE_DEV(cmd));
+ return 0;
+}
+
+static int core_scsi3_emulate_pro_preempt(
+ struct se_cmd *cmd,
+ int type,
+ int scope,
+ u64 res_key,
+ u64 sa_res_key,
+ int abort)
+{
+ int ret = 0;
+
+ switch (type) {
+ case PR_TYPE_WRITE_EXCLUSIVE:
+ case PR_TYPE_EXCLUSIVE_ACCESS:
+ case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+ case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+ case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+ case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+ ret = core_scsi3_pro_preempt(cmd, type, scope,
+ res_key, sa_res_key, abort);
+ break;
+ default:
+ printk(KERN_ERR "SPC-3 PR: Unknown Service Action PREEMPT%s"
+ " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ return ret;
+}
+
+
+static int core_scsi3_emulate_pro_register_and_move(
+ struct se_cmd *cmd,
+ u64 res_key,
+ u64 sa_res_key,
+ int aptpl,
+ int unreg)
+{
+ struct se_session *se_sess = SE_SESS(cmd);
+ struct se_device *dev = SE_DEV(cmd);
+ struct se_dev_entry *se_deve, *dest_se_deve = NULL;
+ struct se_lun *se_lun = SE_LUN(cmd);
+ struct se_node_acl *pr_res_nacl, *pr_reg_nacl, *dest_node_acl = NULL;
+ struct se_port *se_port;
+ struct se_portal_group *se_tpg, *dest_se_tpg = NULL;
+ struct target_core_fabric_ops *dest_tf_ops = NULL, *tf_ops;
+ struct t10_pr_registration *pr_reg, *pr_res_holder, *dest_pr_reg;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ unsigned char *initiator_str;
+ char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN];
+ u32 tid_len, tmp_tid_len;
+ int new_reg = 0, type, scope, ret, matching_iname, prf_isid;
+ unsigned short rtpi;
+ unsigned char proto_ident;
+
+ if (!(se_sess) || !(se_lun)) {
+ printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ memset(dest_iport, 0, 64);
+ memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+ se_tpg = se_sess->se_tpg;
+ tf_ops = TPG_TFO(se_tpg);
+ se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+ /*
+ * Follow logic from spc4r17 Section 5.7.8, Table 50 --
+ * Register behaviors for a REGISTER AND MOVE service action
+ *
+ * Locate the existing *pr_reg via struct se_node_acl pointers
+ */
+ pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl,
+ se_sess);
+ if (!(pr_reg)) {
+ printk(KERN_ERR "SPC-3 PR: Unable to locate PR_REGISTERED"
+ " *pr_reg for REGISTER_AND_MOVE\n");
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+ /*
+ * The provided reservation key much match the existing reservation key
+ * provided during this initiator's I_T nexus registration.
+ */
+ if (res_key != pr_reg->pr_res_key) {
+ printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received"
+ " res_key: 0x%016Lx does not match existing SA REGISTER"
+ " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+ /*
+ * The service active reservation key needs to be non zero
+ */
+ if (!(sa_res_key)) {
+ printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received zero"
+ " sa_res_key\n");
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ /*
+ * Determine the Relative Target Port Identifier where the reservation
+ * will be moved to for the TransportID containing SCSI initiator WWN
+ * information.
+ */
+ rtpi = (buf[18] & 0xff) << 8;
+ rtpi |= buf[19] & 0xff;
+ tid_len = (buf[20] & 0xff) << 24;
+ tid_len |= (buf[21] & 0xff) << 16;
+ tid_len |= (buf[22] & 0xff) << 8;
+ tid_len |= buf[23] & 0xff;
+
+ if ((tid_len + 24) != cmd->data_length) {
+ printk(KERN_ERR "SPC-3 PR: Illegal tid_len: %u + 24 byte header"
+ " does not equal CDB data_length: %u\n", tid_len,
+ cmd->data_length);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+
+ spin_lock(&dev->se_port_lock);
+ list_for_each_entry(se_port, &dev->dev_sep_list, sep_list) {
+ if (se_port->sep_rtpi != rtpi)
+ continue;
+ dest_se_tpg = se_port->sep_tpg;
+ if (!(dest_se_tpg))
+ continue;
+ dest_tf_ops = TPG_TFO(dest_se_tpg);
+ if (!(dest_tf_ops))
+ continue;
+
+ atomic_inc(&dest_se_tpg->tpg_pr_ref_count);
+ smp_mb__after_atomic_inc();
+ spin_unlock(&dev->se_port_lock);
+
+ ret = core_scsi3_tpg_depend_item(dest_se_tpg);
+ if (ret != 0) {
+ printk(KERN_ERR "core_scsi3_tpg_depend_item() failed"
+ " for dest_se_tpg\n");
+ atomic_dec(&dest_se_tpg->tpg_pr_ref_count);
+ smp_mb__after_atomic_dec();
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+ }
+
+ spin_lock(&dev->se_port_lock);
+ break;
+ }
+ spin_unlock(&dev->se_port_lock);
+
+ if (!(dest_se_tpg) || (!dest_tf_ops)) {
+ printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate"
+ " fabric ops from Relative Target Port Identifier:"
+ " %hu\n", rtpi);
+ core_scsi3_put_pr_reg(pr_reg);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ proto_ident = (buf[24] & 0x0f);
+#if 0
+ printk("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:"
+ " 0x%02x\n", proto_ident);
+#endif
+ if (proto_ident != dest_tf_ops->get_fabric_proto_ident(dest_se_tpg)) {
+ printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Received"
+ " proto_ident: 0x%02x does not match ident: 0x%02x"
+ " from fabric: %s\n", proto_ident,
+ dest_tf_ops->get_fabric_proto_ident(dest_se_tpg),
+ dest_tf_ops->get_fabric_name());
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) {
+ printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Fabric does not"
+ " containg a valid tpg_parse_pr_out_transport_id"
+ " function pointer\n");
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+ initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg,
+ (const char *)&buf[24], &tmp_tid_len, &iport_ptr);
+ if (!(initiator_str)) {
+ printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate"
+ " initiator_str from Transport ID\n");
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+
+ printk(KERN_INFO "SPC-3 PR [%s] Extracted initiator %s identifier: %s"
+ " %s\n", dest_tf_ops->get_fabric_name(), (iport_ptr != NULL) ?
+ "port" : "device", initiator_str, (iport_ptr != NULL) ?
+ iport_ptr : "");
+ /*
+ * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service
+ * action specifies a TransportID that is the same as the initiator port
+ * of the I_T nexus for the command received, then the command shall
+ * be terminated with CHECK CONDITION status, with the sense key set to
+ * ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD
+ * IN PARAMETER LIST.
+ */
+ pr_reg_nacl = pr_reg->pr_reg_nacl;
+ matching_iname = (!strcmp(initiator_str,
+ pr_reg_nacl->initiatorname)) ? 1 : 0;
+ if (!(matching_iname))
+ goto after_iport_check;
+
+ if (!(iport_ptr) || !(pr_reg->isid_present_at_reg)) {
+ printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s"
+ " matches: %s on received I_T Nexus\n", initiator_str,
+ pr_reg_nacl->initiatorname);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ if (!(strcmp(iport_ptr, pr_reg->pr_reg_isid))) {
+ printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s"
+ " matches: %s %s on received I_T Nexus\n",
+ initiator_str, iport_ptr, pr_reg_nacl->initiatorname,
+ pr_reg->pr_reg_isid);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+after_iport_check:
+ /*
+ * Locate the destination struct se_node_acl from the received Transport ID
+ */
+ spin_lock_bh(&dest_se_tpg->acl_node_lock);
+ dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg,
+ initiator_str);
+ if (dest_node_acl) {
+ atomic_inc(&dest_node_acl->acl_pr_ref_count);
+ smp_mb__after_atomic_inc();
+ }
+ spin_unlock_bh(&dest_se_tpg->acl_node_lock);
+
+ if (!(dest_node_acl)) {
+ printk(KERN_ERR "Unable to locate %s dest_node_acl for"
+ " TransportID%s\n", dest_tf_ops->get_fabric_name(),
+ initiator_str);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ ret = core_scsi3_nodeacl_depend_item(dest_node_acl);
+ if (ret != 0) {
+ printk(KERN_ERR "core_scsi3_nodeacl_depend_item() for"
+ " dest_node_acl\n");
+ atomic_dec(&dest_node_acl->acl_pr_ref_count);
+ smp_mb__after_atomic_dec();
+ dest_node_acl = NULL;
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+#if 0
+ printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Found %s dest_node_acl:"
+ " %s from TransportID\n", dest_tf_ops->get_fabric_name(),
+ dest_node_acl->initiatorname);
+#endif
+ /*
+ * Locate the struct se_dev_entry pointer for the matching RELATIVE TARGET
+ * PORT IDENTIFIER.
+ */
+ dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, rtpi);
+ if (!(dest_se_deve)) {
+ printk(KERN_ERR "Unable to locate %s dest_se_deve from RTPI:"
+ " %hu\n", dest_tf_ops->get_fabric_name(), rtpi);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+
+ ret = core_scsi3_lunacl_depend_item(dest_se_deve);
+ if (ret < 0) {
+ printk(KERN_ERR "core_scsi3_lunacl_depend_item() failed\n");
+ atomic_dec(&dest_se_deve->pr_ref_count);
+ smp_mb__after_atomic_dec();
+ dest_se_deve = NULL;
+ ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+ goto out;
+ }
+#if 0
+ printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Located %s node %s LUN"
+ " ACL for dest_se_deve->mapped_lun: %u\n",
+ dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname,
+ dest_se_deve->mapped_lun);
+#endif
+ /*
+ * A persistent reservation needs to already existing in order to
+ * successfully complete the REGISTER_AND_MOVE service action..
+ */
+ spin_lock(&dev->dev_reservation_lock);
+ pr_res_holder = dev->dev_pr_res_holder;
+ if (!(pr_res_holder)) {
+ printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: No reservation"
+ " currently held\n");
+ spin_unlock(&dev->dev_reservation_lock);
+ ret = PYX_TRANSPORT_INVALID_CDB_FIELD;
+ goto out;
+ }
+ /*
+ * The received on I_T Nexus must be the reservation holder.
+ *
+ * From spc4r17 section 5.7.8 Table 50 --
+ * Register behaviors for a REGISTER AND MOVE service action
+ */
+ if (pr_res_holder != pr_reg) {
+ printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Calling I_T"
+ " Nexus is not reservation holder\n");
+ spin_unlock(&dev->dev_reservation_lock);
+ ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+ goto out;
+ }
+ /*
+ * From spc4r17 section 5.7.8: registering and moving reservation
+ *
+ * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service
+ * action is received and the established persistent reservation is a
+ * Write Exclusive - All Registrants type or Exclusive Access -
+ * All Registrants type reservation, then the command shall be completed
+ * with RESERVATION CONFLICT status.
+ */
+ if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+ (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
+ printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Unable to move"
+ " reservation for type: %s\n",
+ core_scsi3_pr_dump_type(pr_res_holder->pr_res_type));
+ spin_unlock(&dev->dev_reservation_lock);
+ ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+ goto out;
+ }
+ pr_res_nacl = pr_res_holder->pr_reg_nacl;
+ /*
+ * b) Ignore the contents of the (received) SCOPE and TYPE fields;
+ */
+ type = pr_res_holder->pr_res_type;
+ scope = pr_res_holder->pr_res_type;
+ /*
+ * c) Associate the reservation key specified in the SERVICE ACTION
+ * RESERVATION KEY field with the I_T nexus specified as the
+ * destination of the register and move, where:
+ * A) The I_T nexus is specified by the TransportID and the
+ * RELATIVE TARGET PORT IDENTIFIER field (see 6.14.4); and
+ * B) Regardless of the TransportID format used, the association for
+ * the initiator port is based on either the initiator port name
+ * (see 3.1.71) on SCSI transport protocols where port names are
+ * required or the initiator port identifier (see 3.1.70) on SCSI
+ * transport protocols where port names are not required;
+ * d) Register the reservation key specified in the SERVICE ACTION
+ * RESERVATION KEY field;
+ * e) Retain the reservation key specified in the SERVICE ACTION
+ * RESERVATION KEY field and associated information;
+ *
+ * Also, It is not an error for a REGISTER AND MOVE service action to
+ * register an I_T nexus that is already registered with the same
+ * reservation key or a different reservation key.
+ */
+ dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl,
+ iport_ptr);
+ if (!(dest_pr_reg)) {
+ ret = core_scsi3_alloc_registration(SE_DEV(cmd),
+ dest_node_acl, dest_se_deve, iport_ptr,
+ sa_res_key, 0, aptpl, 2, 1);
+ if (ret != 0) {
+ spin_unlock(&dev->dev_reservation_lock);
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+ dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl,
+ iport_ptr);
+ new_reg = 1;
+ }
+ /*
+ * f) Release the persistent reservation for the persistent reservation
+ * holder (i.e., the I_T nexus on which the
+ */
+ __core_scsi3_complete_pro_release(dev, pr_res_nacl,
+ dev->dev_pr_res_holder, 0);
+ /*
+ * g) Move the persistent reservation to the specified I_T nexus using
+ * the same scope and type as the persistent reservation released in
+ * item f); and
+ */
+ dev->dev_pr_res_holder = dest_pr_reg;
+ dest_pr_reg->pr_res_holder = 1;
+ dest_pr_reg->pr_res_type = type;
+ pr_reg->pr_res_scope = scope;
+ prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+ PR_REG_ISID_ID_LEN);
+ /*
+ * Increment PRGeneration for existing registrations..
+ */
+ if (!(new_reg))
+ dest_pr_reg->pr_res_generation = pr_tmpl->pr_generation++;
+ spin_unlock(&dev->dev_reservation_lock);
+
+ printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER_AND_MOVE"
+ " created new reservation holder TYPE: %s on object RTPI:"
+ " %hu PRGeneration: 0x%08x\n", dest_tf_ops->get_fabric_name(),
+ core_scsi3_pr_dump_type(type), rtpi,
+ dest_pr_reg->pr_res_generation);
+ printk(KERN_INFO "SPC-3 PR Successfully moved reservation from"
+ " %s Fabric Node: %s%s -> %s Fabric Node: %s %s\n",
+ tf_ops->get_fabric_name(), pr_reg_nacl->initiatorname,
+ (prf_isid) ? &i_buf[0] : "", dest_tf_ops->get_fabric_name(),
+ dest_node_acl->initiatorname, (iport_ptr != NULL) ?
+ iport_ptr : "");
+ /*
+ * It is now safe to release configfs group dependencies for destination
+ * of Transport ID Initiator Device/Port Identifier
+ */
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_se_tpg);
+ /*
+ * h) If the UNREG bit is set to one, unregister (see 5.7.11.3) the I_T
+ * nexus on which PERSISTENT RESERVE OUT command was received.
+ */
+ if (unreg) {
+ spin_lock(&pr_tmpl->registration_lock);
+ __core_scsi3_free_registration(dev, pr_reg, NULL, 1);
+ spin_unlock(&pr_tmpl->registration_lock);
+ } else
+ core_scsi3_put_pr_reg(pr_reg);
+
+ /*
+ * Clear the APTPL metadata if APTPL has been disabled, otherwise
+ * write out the updated metadata to struct file for this SCSI device.
+ */
+ if (!(aptpl)) {
+ pr_tmpl->pr_aptpl_active = 0;
+ core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0);
+ printk("SPC-3 PR: Set APTPL Bit Deactivated for"
+ " REGISTER_AND_MOVE\n");
+ } else {
+ pr_tmpl->pr_aptpl_active = 1;
+ ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+ &dest_pr_reg->pr_aptpl_buf[0],
+ pr_tmpl->pr_aptpl_buf_len);
+ if (!(ret))
+ printk("SPC-3 PR: Set APTPL Bit Activated for"
+ " REGISTER_AND_MOVE\n");
+ }
+
+ core_scsi3_put_pr_reg(dest_pr_reg);
+ return 0;
+out:
+ if (dest_se_deve)
+ core_scsi3_lunacl_undepend_item(dest_se_deve);
+ if (dest_node_acl)
+ core_scsi3_nodeacl_undepend_item(dest_node_acl);
+ core_scsi3_tpg_undepend_item(dest_se_tpg);
+ core_scsi3_put_pr_reg(pr_reg);
+ return ret;
+}
+
+static unsigned long long core_scsi3_extract_reservation_key(unsigned char *cdb)
+{
+ unsigned int __v1, __v2;
+
+ __v1 = (cdb[0] << 24) | (cdb[1] << 16) | (cdb[2] << 8) | cdb[3];
+ __v2 = (cdb[4] << 24) | (cdb[5] << 16) | (cdb[6] << 8) | cdb[7];
+
+ return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
+}
+
+/*
+ * See spc4r17 section 6.14 Table 170
+ */
+static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
+{
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ u64 res_key, sa_res_key;
+ int sa, scope, type, aptpl;
+ int spec_i_pt = 0, all_tg_pt = 0, unreg = 0;
+ /*
+ * FIXME: A NULL struct se_session pointer means an this is not coming from
+ * a $FABRIC_MOD's nexus, but from internal passthrough ops.
+ */
+ if (!(SE_SESS(cmd)))
+ return PYX_TRANSPORT_LU_COMM_FAILURE;
+
+ if (cmd->data_length < 24) {
+ printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list"
+ " length too small: %u\n", cmd->data_length);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ /*
+ * From the PERSISTENT_RESERVE_OUT command descriptor block (CDB)
+ */
+ sa = (cdb[1] & 0x1f);
+ scope = (cdb[2] & 0xf0);
+ type = (cdb[2] & 0x0f);
+ /*
+ * From PERSISTENT_RESERVE_OUT parameter list (payload)
+ */
+ res_key = core_scsi3_extract_reservation_key(&buf[0]);
+ sa_res_key = core_scsi3_extract_reservation_key(&buf[8]);
+ /*
+ * REGISTER_AND_MOVE uses a different SA parameter list containing
+ * SCSI TransportIDs.
+ */
+ if (sa != PRO_REGISTER_AND_MOVE) {
+ spec_i_pt = (buf[20] & 0x08);
+ all_tg_pt = (buf[20] & 0x04);
+ aptpl = (buf[20] & 0x01);
+ } else {
+ aptpl = (buf[17] & 0x01);
+ unreg = (buf[17] & 0x02);
+ }
+ /*
+ * SPEC_I_PT=1 is only valid for Service action: REGISTER
+ */
+ if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER))
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ /*
+ * From spc4r17 section 6.14:
+ *
+ * If the SPEC_I_PT bit is set to zero, the service action is not
+ * REGISTER AND MOVE, and the parameter list length is not 24, then
+ * the command shall be terminated with CHECK CONDITION status, with
+ * the sense key set to ILLEGAL REQUEST, and the additional sense
+ * code set to PARAMETER LIST LENGTH ERROR.
+ */
+ if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) &&
+ (cmd->data_length != 24)) {
+ printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter"
+ " list length: %u\n", cmd->data_length);
+ return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ }
+ /*
+ * (core_scsi3_emulate_pro_* function parameters
+ * are defined by spc4r17 Table 174:
+ * PERSISTENT_RESERVE_OUT service actions and valid parameters.
+ */
+ switch (sa) {
+ case PRO_REGISTER:
+ return core_scsi3_emulate_pro_register(cmd,
+ res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0);
+ case PRO_RESERVE:
+ return core_scsi3_emulate_pro_reserve(cmd,
+ type, scope, res_key);
+ case PRO_RELEASE:
+ return core_scsi3_emulate_pro_release(cmd,
+ type, scope, res_key);
+ case PRO_CLEAR:
+ return core_scsi3_emulate_pro_clear(cmd, res_key);
+ case PRO_PREEMPT:
+ return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+ res_key, sa_res_key, 0);
+ case PRO_PREEMPT_AND_ABORT:
+ return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+ res_key, sa_res_key, 1);
+ case PRO_REGISTER_AND_IGNORE_EXISTING_KEY:
+ return core_scsi3_emulate_pro_register(cmd,
+ 0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1);
+ case PRO_REGISTER_AND_MOVE:
+ return core_scsi3_emulate_pro_register_and_move(cmd, res_key,
+ sa_res_key, aptpl, unreg);
+ default:
+ printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service"
+ " action: 0x%02x\n", cdb[1] & 0x1f);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action READ_KEYS
+ *
+ * See spc4r17 section 5.7.6.2 and section 6.13.2, Table 160
+ */
+static int core_scsi3_pri_read_keys(struct se_cmd *cmd)
+{
+ struct se_device *se_dev = SE_DEV(cmd);
+ struct se_subsystem_dev *su_dev = SU_DEV(se_dev);
+ struct t10_pr_registration *pr_reg;
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ u32 add_len = 0, off = 8;
+
+ if (cmd->data_length < 8) {
+ printk(KERN_ERR "PRIN SA READ_KEYS SCSI Data Length: %u"
+ " too small\n", cmd->data_length);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff);
+ buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff);
+ buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff);
+ buf[3] = (T10_RES(su_dev)->pr_generation & 0xff);
+
+ spin_lock(&T10_RES(su_dev)->registration_lock);
+ list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list,
+ pr_reg_list) {
+ /*
+ * Check for overflow of 8byte PRI READ_KEYS payload and
+ * next reservation key list descriptor.
+ */
+ if ((add_len + 8) > (cmd->data_length - 8))
+ break;
+
+ buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff);
+ buf[off++] = (pr_reg->pr_res_key & 0xff);
+
+ add_len += 8;
+ }
+ spin_unlock(&T10_RES(su_dev)->registration_lock);
+
+ buf[4] = ((add_len >> 24) & 0xff);
+ buf[5] = ((add_len >> 16) & 0xff);
+ buf[6] = ((add_len >> 8) & 0xff);
+ buf[7] = (add_len & 0xff);
+
+ return 0;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action READ_RESERVATION
+ *
+ * See spc4r17 section 5.7.6.3 and section 6.13.3.2 Table 161 and 162
+ */
+static int core_scsi3_pri_read_reservation(struct se_cmd *cmd)
+{
+ struct se_device *se_dev = SE_DEV(cmd);
+ struct se_subsystem_dev *su_dev = SU_DEV(se_dev);
+ struct t10_pr_registration *pr_reg;
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ u64 pr_res_key;
+ u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */
+
+ if (cmd->data_length < 8) {
+ printk(KERN_ERR "PRIN SA READ_RESERVATIONS SCSI Data Length: %u"
+ " too small\n", cmd->data_length);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff);
+ buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff);
+ buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff);
+ buf[3] = (T10_RES(su_dev)->pr_generation & 0xff);
+
+ spin_lock(&se_dev->dev_reservation_lock);
+ pr_reg = se_dev->dev_pr_res_holder;
+ if ((pr_reg)) {
+ /*
+ * Set the hardcoded Additional Length
+ */
+ buf[4] = ((add_len >> 24) & 0xff);
+ buf[5] = ((add_len >> 16) & 0xff);
+ buf[6] = ((add_len >> 8) & 0xff);
+ buf[7] = (add_len & 0xff);
+
+ if (cmd->data_length < 22) {
+ spin_unlock(&se_dev->dev_reservation_lock);
+ return 0;
+ }
+ /*
+ * Set the Reservation key.
+ *
+ * From spc4r17, section 5.7.10:
+ * A persistent reservation holder has its reservation key
+ * returned in the parameter data from a PERSISTENT
+ * RESERVE IN command with READ RESERVATION service action as
+ * follows:
+ * a) For a persistent reservation of the type Write Exclusive
+ * - All Registrants or Exclusive Access All Regitrants,
+ * the reservation key shall be set to zero; or
+ * b) For all other persistent reservation types, the
+ * reservation key shall be set to the registered
+ * reservation key for the I_T nexus that holds the
+ * persistent reservation.
+ */
+ if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+ (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))
+ pr_res_key = 0;
+ else
+ pr_res_key = pr_reg->pr_res_key;
+
+ buf[8] = ((pr_res_key >> 56) & 0xff);
+ buf[9] = ((pr_res_key >> 48) & 0xff);
+ buf[10] = ((pr_res_key >> 40) & 0xff);
+ buf[11] = ((pr_res_key >> 32) & 0xff);
+ buf[12] = ((pr_res_key >> 24) & 0xff);
+ buf[13] = ((pr_res_key >> 16) & 0xff);
+ buf[14] = ((pr_res_key >> 8) & 0xff);
+ buf[15] = (pr_res_key & 0xff);
+ /*
+ * Set the SCOPE and TYPE
+ */
+ buf[21] = (pr_reg->pr_res_scope & 0xf0) |
+ (pr_reg->pr_res_type & 0x0f);
+ }
+ spin_unlock(&se_dev->dev_reservation_lock);
+
+ return 0;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action REPORT_CAPABILITIES
+ *
+ * See spc4r17 section 6.13.4 Table 165
+ */
+static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
+{
+ struct se_device *dev = SE_DEV(cmd);
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ u16 add_len = 8; /* Hardcoded to 8. */
+
+ if (cmd->data_length < 6) {
+ printk(KERN_ERR "PRIN SA REPORT_CAPABILITIES SCSI Data Length:"
+ " %u too small\n", cmd->data_length);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ buf[0] = ((add_len << 8) & 0xff);
+ buf[1] = (add_len & 0xff);
+ buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */
+ buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */
+ buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */
+ buf[2] |= 0x01; /* PTPL_C: Persistence across Target Power Loss bit */
+ /*
+ * We are filling in the PERSISTENT RESERVATION TYPE MASK below, so
+ * set the TMV: Task Mask Valid bit.
+ */
+ buf[3] |= 0x80;
+ /*
+ * Change ALLOW COMMANDs to 0x20 or 0x40 later from Table 166
+ */
+ buf[3] |= 0x10; /* ALLOW COMMANDs field 001b */
+ /*
+ * PTPL_A: Persistence across Target Power Loss Active bit
+ */
+ if (pr_tmpl->pr_aptpl_active)
+ buf[3] |= 0x01;
+ /*
+ * Setup the PERSISTENT RESERVATION TYPE MASK from Table 167
+ */
+ buf[4] |= 0x80; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
+ buf[4] |= 0x40; /* PR_TYPE_EXCLUSIVE_ACCESS_REGONLY */
+ buf[4] |= 0x20; /* PR_TYPE_WRITE_EXCLUSIVE_REGONLY */
+ buf[4] |= 0x08; /* PR_TYPE_EXCLUSIVE_ACCESS */
+ buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */
+ buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
+
+ return 0;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action READ_FULL_STATUS
+ *
+ * See spc4r17 section 6.13.5 Table 168 and 169
+ */
+static int core_scsi3_pri_read_full_status(struct se_cmd *cmd)
+{
+ struct se_device *se_dev = SE_DEV(cmd);
+ struct se_node_acl *se_nacl;
+ struct se_subsystem_dev *su_dev = SU_DEV(se_dev);
+ struct se_portal_group *se_tpg;
+ struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+ struct t10_reservation_template *pr_tmpl = &SU_DEV(se_dev)->t10_reservation;
+ unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+ u32 add_desc_len = 0, add_len = 0, desc_len, exp_desc_len;
+ u32 off = 8; /* off into first Full Status descriptor */
+ int format_code = 0;
+
+ if (cmd->data_length < 8) {
+ printk(KERN_ERR "PRIN SA READ_FULL_STATUS SCSI Data Length: %u"
+ " too small\n", cmd->data_length);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+ buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff);
+ buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff);
+ buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff);
+ buf[3] = (T10_RES(su_dev)->pr_generation & 0xff);
+
+ spin_lock(&pr_tmpl->registration_lock);
+ list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+ &pr_tmpl->registration_list, pr_reg_list) {
+
+ se_nacl = pr_reg->pr_reg_nacl;
+ se_tpg = pr_reg->pr_reg_nacl->se_tpg;
+ add_desc_len = 0;
+ /*
+ * Determine expected length of $FABRIC_MOD specific
+ * TransportID full status descriptor..
+ */
+ exp_desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id_len(
+ se_tpg, se_nacl, pr_reg, &format_code);
+
+ if ((exp_desc_len + add_len) > cmd->data_length) {
+ printk(KERN_WARNING "SPC-3 PRIN READ_FULL_STATUS ran"
+ " out of buffer: %d\n", cmd->data_length);
+ break;
+ }
+ /*
+ * Set RESERVATION KEY
+ */
+ buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff);
+ buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff);
+ buf[off++] = (pr_reg->pr_res_key & 0xff);
+ off += 4; /* Skip Over Reserved area */
+
+ /*
+ * Set ALL_TG_PT bit if PROUT SA REGISTER had this set.
+ */
+ if (pr_reg->pr_reg_all_tg_pt)
+ buf[off] = 0x02;
+ /*
+ * The struct se_lun pointer will be present for the
+ * reservation holder for PR_HOLDER bit.
+ *
+ * Also, if this registration is the reservation
+ * holder, fill in SCOPE and TYPE in the next byte.
+ */
+ if (pr_reg->pr_res_holder) {
+ buf[off++] |= 0x01;
+ buf[off++] = (pr_reg->pr_res_scope & 0xf0) |
+ (pr_reg->pr_res_type & 0x0f);
+ } else
+ off += 2;
+
+ off += 4; /* Skip over reserved area */
+ /*
+ * From spc4r17 6.3.15:
+ *
+ * If the ALL_TG_PT bit set to zero, the RELATIVE TARGET PORT
+ * IDENTIFIER field contains the relative port identifier (see
+ * 3.1.120) of the target port that is part of the I_T nexus
+ * described by this full status descriptor. If the ALL_TG_PT
+ * bit is set to one, the contents of the RELATIVE TARGET PORT
+ * IDENTIFIER field are not defined by this standard.
+ */
+ if (!(pr_reg->pr_reg_all_tg_pt)) {
+ struct se_port *port = pr_reg->pr_reg_tg_pt_lun->lun_sep;
+
+ buf[off++] = ((port->sep_rtpi >> 8) & 0xff);
+ buf[off++] = (port->sep_rtpi & 0xff);
+ } else
+ off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */
+
+ /*
+ * Now, have the $FABRIC_MOD fill in the protocol identifier
+ */
+ desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id(se_tpg,
+ se_nacl, pr_reg, &format_code, &buf[off+4]);
+ /*
+ * Set the ADDITIONAL DESCRIPTOR LENGTH
+ */
+ buf[off++] = ((desc_len >> 24) & 0xff);
+ buf[off++] = ((desc_len >> 16) & 0xff);
+ buf[off++] = ((desc_len >> 8) & 0xff);
+ buf[off++] = (desc_len & 0xff);
+ /*
+ * Size of full desctipor header minus TransportID
+ * containing $FABRIC_MOD specific) initiator device/port
+ * WWN information.
+ *
+ * See spc4r17 Section 6.13.5 Table 169
+ */
+ add_desc_len = (24 + desc_len);
+
+ off += desc_len;
+ add_len += add_desc_len;
+ }
+ spin_unlock(&pr_tmpl->registration_lock);
+ /*
+ * Set ADDITIONAL_LENGTH
+ */
+ buf[4] = ((add_len >> 24) & 0xff);
+ buf[5] = ((add_len >> 16) & 0xff);
+ buf[6] = ((add_len >> 8) & 0xff);
+ buf[7] = (add_len & 0xff);
+
+ return 0;
+}
+
+static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb)
+{
+ switch (cdb[1] & 0x1f) {
+ case PRI_READ_KEYS:
+ return core_scsi3_pri_read_keys(cmd);
+ case PRI_READ_RESERVATION:
+ return core_scsi3_pri_read_reservation(cmd);
+ case PRI_REPORT_CAPABILITIES:
+ return core_scsi3_pri_report_capabilities(cmd);
+ case PRI_READ_FULL_STATUS:
+ return core_scsi3_pri_read_full_status(cmd);
+ default:
+ printk(KERN_ERR "Unknown PERSISTENT_RESERVE_IN service"
+ " action: 0x%02x\n", cdb[1] & 0x1f);
+ return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ }
+
+}
+
+int core_scsi3_emulate_pr(struct se_cmd *cmd)
+{
+ unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0];
+ struct se_device *dev = cmd->se_dev;
+ /*
+ * Following spc2r20 5.5.1 Reservations overview:
+ *
+ * If a logical unit has been reserved by any RESERVE command and is
+ * still reserved by any initiator, all PERSISTENT RESERVE IN and all
+ * PERSISTENT RESERVE OUT commands shall conflict regardless of
+ * initiator or service action and shall terminate with a RESERVATION
+ * CONFLICT status.
+ */
+ if (dev->dev_flags & DF_SPC2_RESERVATIONS) {
+ printk(KERN_ERR "Received PERSISTENT_RESERVE CDB while legacy"
+ " SPC-2 reservation is held, returning"
+ " RESERVATION_CONFLICT\n");
+ return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ }
+
+ return (cdb[0] == PERSISTENT_RESERVE_OUT) ?
+ core_scsi3_emulate_pr_out(cmd, cdb) :
+ core_scsi3_emulate_pr_in(cmd, cdb);
+}
+
+static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type)
+{
+ return 0;
+}
+
+static int core_pt_seq_non_holder(
+ struct se_cmd *cmd,
+ unsigned char *cdb,
+ u32 pr_reg_type)
+{
+ return 0;
+}
+
+int core_setup_reservations(struct se_device *dev, int force_pt)
+{
+ struct se_subsystem_dev *su_dev = dev->se_sub_dev;
+ struct t10_reservation_template *rest = &su_dev->t10_reservation;
+ /*
+ * If this device is from Target_Core_Mod/pSCSI, use the reservations
+ * of the Underlying SCSI hardware. In Linux/SCSI terms, this can
+ * cause a problem because libata and some SATA RAID HBAs appear
+ * under Linux/SCSI, but to emulate reservations themselves.
+ */
+ if (((TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) &&
+ !(DEV_ATTRIB(dev)->emulate_reservations)) || force_pt) {
+ rest->res_type = SPC_PASSTHROUGH;
+ rest->pr_ops.t10_reservation_check = &core_pt_reservation_check;
+ rest->pr_ops.t10_seq_non_holder = &core_pt_seq_non_holder;
+ printk(KERN_INFO "%s: Using SPC_PASSTHROUGH, no reservation"
+ " emulation\n", TRANSPORT(dev)->name);
+ return 0;
+ }
+ /*
+ * If SPC-3 or above is reported by real or emulated struct se_device,
+ * use emulated Persistent Reservations.
+ */
+ if (TRANSPORT(dev)->get_device_rev(dev) >= SCSI_3) {
+ rest->res_type = SPC3_PERSISTENT_RESERVATIONS;
+ rest->pr_ops.t10_reservation_check = &core_scsi3_pr_reservation_check;
+ rest->pr_ops.t10_seq_non_holder = &core_scsi3_pr_seq_non_holder;
+ printk(KERN_INFO "%s: Using SPC3_PERSISTENT_RESERVATIONS"
+ " emulation\n", TRANSPORT(dev)->name);
+ } else {
+ rest->res_type = SPC2_RESERVATIONS;
+ rest->pr_ops.t10_reservation_check = &core_scsi2_reservation_check;
+ rest->pr_ops.t10_seq_non_holder =
+ &core_scsi2_reservation_seq_non_holder;
+ printk(KERN_INFO "%s: Using SPC2_RESERVATIONS emulation\n",
+ TRANSPORT(dev)->name);
+ }
+
+ return 0;
+}
diff --git a/drivers/target/target_core_pr.h b/drivers/target/target_core_pr.h
new file mode 100644
index 0000000..5603bcf
--- /dev/null
+++ b/drivers/target/target_core_pr.h
@@ -0,0 +1,67 @@
+#ifndef TARGET_CORE_PR_H
+#define TARGET_CORE_PR_H
+/*
+ * PERSISTENT_RESERVE_OUT service action codes
+ *
+ * spc4r17 section 6.14.2 Table 171
+ */
+#define PRO_REGISTER 0x00
+#define PRO_RESERVE 0x01
+#define PRO_RELEASE 0x02
+#define PRO_CLEAR 0x03
+#define PRO_PREEMPT 0x04
+#define PRO_PREEMPT_AND_ABORT 0x05
+#define PRO_REGISTER_AND_IGNORE_EXISTING_KEY 0x06
+#define PRO_REGISTER_AND_MOVE 0x07
+/*
+ * PERSISTENT_RESERVE_IN service action codes
+ *
+ * spc4r17 section 6.13.1 Table 159
+ */
+#define PRI_READ_KEYS 0x00
+#define PRI_READ_RESERVATION 0x01
+#define PRI_REPORT_CAPABILITIES 0x02
+#define PRI_READ_FULL_STATUS 0x03
+/*
+ * PERSISTENT_RESERVE_ SCOPE field
+ *
+ * spc4r17 section 6.13.3.3 Table 163
+ */
+#define PR_SCOPE_LU_SCOPE 0x00
+/*
+ * PERSISTENT_RESERVE_* TYPE field
+ *
+ * spc4r17 section 6.13.3.4 Table 164
+ */
+#define PR_TYPE_WRITE_EXCLUSIVE 0x01
+#define PR_TYPE_EXCLUSIVE_ACCESS 0x03
+#define PR_TYPE_WRITE_EXCLUSIVE_REGONLY 0x05
+#define PR_TYPE_EXCLUSIVE_ACCESS_REGONLY 0x06
+#define PR_TYPE_WRITE_EXCLUSIVE_ALLREG 0x07
+#define PR_TYPE_EXCLUSIVE_ACCESS_ALLREG 0x08
+
+#define PR_APTPL_MAX_IPORT_LEN 256
+#define PR_APTPL_MAX_TPORT_LEN 256
+
+extern struct kmem_cache *t10_pr_reg_cache;
+
+extern int core_pr_dump_initiator_port(struct t10_pr_registration *,
+ char *, u32);
+extern int core_scsi2_emulate_crh(struct se_cmd *);
+extern int core_scsi3_alloc_aptpl_registration(
+ struct t10_reservation_template *, u64,
+ unsigned char *, unsigned char *, u32,
+ unsigned char *, u16, u32, int, int, u8);
+extern int core_scsi3_check_aptpl_registration(struct se_device *,
+ struct se_portal_group *, struct se_lun *,
+ struct se_lun_acl *);
+extern void core_scsi3_free_pr_reg_from_nacl(struct se_device *,
+ struct se_node_acl *);
+extern void core_scsi3_free_all_registrations(struct se_device *);
+extern unsigned char *core_scsi3_pr_dump_type(int);
+extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *,
+ struct se_cmd *);
+extern int core_scsi3_emulate_pr(struct se_cmd *);
+extern int core_setup_reservations(struct se_device *, int);
+
+#endif /* TARGET_CORE_PR_H */
--
1.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists