| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AANLkTim2UhJAhOw1qHvZ9bbctR0tNSMvE61T=sxffHxO@mail.gmail.com>
Date: Tue, 28 Sep 2010 14:58:30 +0900
From: Minkyu Kang <promsoft@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Minkyu Kang <mk7.kang@...sung.com>, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org, kyungmin.park@...sung.com,
Greg KH <greg@...ah.com>, Ben Dooks <ben-i2c@...ff.org>
Subject: Re: [PATCH] misc: adds support the FSA9480 USB Switch
Dear Andrew Morton,
On 18 September 2010 07:07, Andrew Morton <akpm@...ux-foundation.org> wrote:
> (catching up!)
>
> On Tue, 31 Aug 2010 19:28:42 +0900
> Minkyu Kang <mk7.kang@...sung.com> wrote:
>
>> The FSA9480 is a USB port accessory detector and switch.
>> This patch adds support the FSA9480 USB Switch.
>>
>
> What a strange device.
>
> Is there a data sheet available?
Hello :)
I couldn't find the fsa9480 data sheet on the web.
But I found the fsa9280 data sheet instead.
It looks very similar.
http://www.fairchildsemi.com/ds/FS/FSA9280A.pdf
>
>> +config USB_SWITCH_FSA9480
>> + tristate "FSA9480 USB Switch"
>> + depends on I2C
>> + help
>> + The FSA9480 is a USB port accessory detector and switch.
>> + The FSA9480 is fully controlled using I2C and enables USB data,
>> + stereo and mono audio, video, microphone and UART data to use
>> + a common connector port.
>
> So if I'm understanding it correctly, it's an i2c-controlled device
> which turns USB devices on and off, multiplexing them into a single USB
> port? So if I switch from "USB data" over to "microphone", the USB
> subsystem will see the "USB data" device get unplugged and will see a
> "microphone" get plugged in?
>
> Or something else. Am I even vaguely understanding this thing?
>
> It would help if the changelog were to contain a paragraph
> describing the overall behaviour of this device.
>
>>
>> ...
>>
>> +void fsa9480_set_switch(const char *buf)
>> +{
>> + struct fsa9480_usbsw *usbsw = chip;
>> + struct i2c_client *client = usbsw->client;
>> + unsigned int value;
>> + unsigned int path = 0;
>> +
>> + value = fsa9480_read_reg(client, FSA9480_REG_CTRL);
>> +
>> + if (!strncmp(buf, "VAUDIO", 6)) {
>> + path = SW_VAUDIO;
>> + value &= ~CON_MANUAL_SW;
>> + } else if (!strncmp(buf, "UART", 4)) {
>> + path = SW_UART;
>> + value &= ~CON_MANUAL_SW;
>> + } else if (!strncmp(buf, "AUDIO", 5)) {
>> + path = SW_AUDIO;
>> + value &= ~CON_MANUAL_SW;
>> + } else if (!strncmp(buf, "DHOST", 5)) {
>> + path = SW_DHOST;
>> + value &= ~CON_MANUAL_SW;
>> + } else if (!strncmp(buf, "AUTO", 4)) {
>> + path = SW_AUTO;
>> + value |= CON_MANUAL_SW;
>> + } else {
>> + printk(KERN_ERR "Wrong command\n");
>> + return;
>> + }
>> +
>> + usbsw->mansw = path;
>> + fsa9480_write_reg(client, FSA9480_REG_MANSW1, path);
>> + fsa9480_write_reg(client, FSA9480_REG_CTRL, value);
>> +}
>> +EXPORT_SYMBOL_GPL(fsa9480_set_switch);
>
> Why was this exported?
Kyungmin already explained about it.
>
>> +ssize_t fsa9480_get_switch(char *buf)
>> +{
>> + struct fsa9480_usbsw *usbsw = chip;
>> + struct i2c_client *client = usbsw->client;
>> + unsigned int value;
>> +
>> + value = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
>> +
>> + if (value == SW_VAUDIO)
>> + return sprintf(buf, "VAUDIO\n");
>> + else if (value == SW_UART)
>> + return sprintf(buf, "UART\n");
>> + else if (value == SW_AUDIO)
>> + return sprintf(buf, "AUDIO\n");
>> + else if (value == SW_DHOST)
>> + return sprintf(buf, "DHOST\n");
>> + else if (value == SW_AUTO)
>> + return sprintf(buf, "AUTO\n");
>> + else
>> + return sprintf(buf, "%x", value);
>> +}
>> +EXPORT_SYMBOL_GPL(fsa9480_get_switch);
>
> This export also has no callers?
It's for other drivers.
For example.. When USB cable is connected, PMIC driver enable the
power for each device.
But if use the manual switch, PMIC driver can't know what device is enabled.
So, this function was exported.
>
> These functions implement a userspace API. Userspace APIs are
> important. But the patch provided no documentation for that API.
> Please always fully, exhaustively document userspace APIs! For they
> are the one part of the driver which we can never change.
>
> Documenting them in a documentation file is OK. Also there's
> Documentation/ABI/. And they can be nicely described in the changelog
> too.
>
> But providing us with no description at all makes review harder and
> less effective than we'd like it to be, and results in a driver which
> is harder for our users to use.
>
> OK?
>
>> +static ssize_t fsa9480_show_status(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct fsa9480_usbsw *usbsw = dev_get_drvdata(dev);
>> + struct i2c_client *client = usbsw->client;
>> + int devid, ctrl, adc, dev1, dev2, intr,
>> + intmask1, intmask2, time1, time2, mansw1;
>> +
>> + devid = fsa9480_read_reg(client, FSA9480_REG_DEVID);
>> + ctrl = fsa9480_read_reg(client, FSA9480_REG_CTRL);
>> + adc = fsa9480_read_reg(client, FSA9480_REG_ADC);
>> + intmask1 = fsa9480_read_reg(client, FSA9480_REG_INT1_MASK);
>> + intmask2 = fsa9480_read_reg(client, FSA9480_REG_INT2_MASK);
>> + dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
>> + dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
>> + time1 = fsa9480_read_reg(client, FSA9480_REG_TIMING1);
>> + time2 = fsa9480_read_reg(client, FSA9480_REG_TIMING2);
>> + mansw1 = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
>> +
>> + fsa9480_read_irq(client, &intr);
>> +
>> + return sprintf(buf, "Device ID(%02x), CTRL(%02x)\n"
>> + "ADC(%02x), DEV_T1(%02x), DEV_T2(%02x)\n"
>> + "INT(%04x), INTMASK(%02x, %02x)\n"
>> + "TIMING(%02x, %02x), MANSW1(%02x)\n",
>> + devid, ctrl, adc, dev1, dev2, intr,
>> + intmask1, intmask2, time1, time2, mansw1);
>> +}
>
> That's will produce odd-looking output I suspect. More conventional
> would be
>
> Device ID:%02x CTRL:%02x
>
> or something like that.
>
> But that result is basically unparseable by software and a better output
> would be
>
> Device_ID: %02x
> CTRL: %02x
> ADC: %02x
>
> etc.
>
> But even that violates the sysfs one-value-per-file guideline.
>
> So this interface is problematic. It should have been discussed
> up-front in the changelog so we can all take a look at the proposal and
> have a think about it.
Yes. It's for debugging.
I'll remove some features and separate this sysfs file.
>
>>
>> ...
>>
>> +static irqreturn_t fsa9480_irq_handler(int irq, void *data)
>> +{
>> + struct fsa9480_usbsw *usbsw = data;
>> +
>> + if (!work_pending(&usbsw->work)) {
>> + disable_irq_nosync(irq);
>> + schedule_work(&usbsw->work);
>> + }
>> +
>> + return IRQ_HANDLED;
>> +}
>
> I expect that this driver can be converted to the new threaded IRQ code
> (request_threaded_irq) and it will all become simpler.
Ok, I'll convert to new IRQ code.
>
>>
>> ...
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Thanks
Minkyu Kang.
--
from. prom.
www.promsoft.net
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists