| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.OSX.2.00.1009281613260.276@localhost>
Date: Tue, 28 Sep 2010 16:22:32 +1000 (EST)
From: Finn Thain <fthain@...egraphics.com.au>
To: "Justin P. Mattock" <justinmattock@...il.com>
cc: trivial@...nel.org, linux-kernel@...r.kernel.org,
linux-wireless@...r.kernel.org, linux-usb@...r.kernel.org,
linux-scsi@...r.kernel.org, linux-fbdev@...r.kernel.org,
alsa-devel@...a-project.org, dri-devel@...ts.freedesktop.org,
linux-ide@...r.kernel.org,
"Maciej W. Rozycki" <macro@...ux-mips.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Randy Dunlap <rdunlap@...otime.net>,
Matt Turner <mattst88@...il.com>,
Dimitry Torokhov <dmitry.torokhov@...il.com>,
Mike Frysinger <vapier.adi@...il.com>
Subject: Re: [RFC v5]update broken web addresses in the kernel.
Looks good to me.
Finn
On Mon, 27 Sep 2010, Justin P. Mattock wrote:
> Below is an updated patch to fix broken web addresses in the kernel.
> Please let me know if I missed anything, and I'll go back and fix it.
> and lastly Thanks for all the help with this...
>
> Signed-off-by: Justin P. Mattock <justinmattock@...il.com>
> Cc: Maciej W. Rozycki <macro@...ux-mips.org>
> Cc: Geert Uytterhoeven <geert@...ux-m68k.org>
> Cc: Finn Thain <fthain@...egraphics.com.au>
> Cc: Randy Dunlap <rdunlap@...otime.net>
> Cc: Matt Turner <mattst88@...il.com>
> Cc: Dimitry Torokhov <dmitry.torokhov@...il.com>
> Cc: Mike Frysinger <vapier.adi@...il.com>
> Acked-by: Ben Pfaff <blp@...stanford.edu>
> Acked-by: Hans J. Koch <hjk@...utronix.de>
>
> ---
> drivers/ata/pata_it821x.c | 4 ++--
> drivers/atm/Kconfig | 2 +-
> drivers/char/agp/Kconfig | 2 +-
> drivers/char/agp/i460-agp.c | 2 +-
> drivers/char/apm-emulation.c | 4 ++--
> drivers/char/ipmi/ipmi_bt_sm.c | 2 +-
> drivers/char/ipmi/ipmi_si_intf.c | 3 +--
> drivers/char/n_r3964.c | 1 -
> drivers/char/pcmcia/Kconfig | 4 ++--
> drivers/char/tpm/Kconfig | 2 +-
> drivers/char/tpm/tpm_infineon.c | 2 +-
> drivers/edac/edac_device_sysfs.c | 2 +-
> drivers/edac/i82443bxgx_edac.c | 2 +-
> drivers/firmware/Kconfig | 4 ++--
> drivers/firmware/edd.c | 2 +-
> drivers/firmware/pcdp.h | 4 ++--
> drivers/gpu/drm/drm_modes.c | 2 +-
> drivers/hwmon/adm1025.c | 2 +-
> drivers/hwmon/adm1026.c | 2 +-
> drivers/hwmon/f75375s.c | 4 ++--
> drivers/hwmon/g760a.c | 2 +-
> drivers/hwmon/hwmon-vid.c | 2 +-
> drivers/ide/hpt366.c | 2 +-
> drivers/ide/ht6560b.c | 1 -
> drivers/infiniband/Kconfig | 4 ++--
> drivers/infiniband/hw/cxgb3/Kconfig | 2 +-
> drivers/infiniband/hw/cxgb4/Kconfig | 2 +-
> drivers/infiniband/ulp/iser/Kconfig | 2 +-
> drivers/input/joystick/gamecon.c | 3 +--
> drivers/input/misc/cm109.c | 2 +-
> drivers/input/mouse/Kconfig | 1 +
> drivers/input/mouse/touchkit_ps2.c | 4 ++--
> drivers/input/touchscreen/mk712.c | 2 +-
> drivers/isdn/i4l/isdn_audio.c | 2 +-
> drivers/macintosh/therm_adt746x.c | 6 +++---
> drivers/media/IR/keymaps/rc-manli.c | 1 -
> drivers/media/dvb/ttpci/av7110.c | 10 ++--------
> drivers/media/dvb/ttpci/av7110_av.c | 2 +-
> drivers/media/dvb/ttpci/av7110_ca.c | 2 +-
> drivers/media/dvb/ttpci/av7110_hw.c | 2 +-
> drivers/media/dvb/ttpci/av7110_v4l.c | 2 +-
> drivers/media/dvb/ttpci/budget-av.c | 2 +-
> drivers/media/dvb/ttpci/budget-ci.c | 2 +-
> drivers/media/dvb/ttpci/budget-core.c | 2 +-
> drivers/media/dvb/ttpci/budget-patch.c | 2 +-
> drivers/media/dvb/ttpci/budget.c | 2 +-
> drivers/media/radio/radio-maxiradio.c | 2 +-
> drivers/media/radio/radio-typhoon.c | 2 --
> drivers/media/video/Kconfig | 2 +-
> drivers/media/video/cafe_ccic.c | 2 +-
> drivers/media/video/cx18/cx18-cards.c | 2 +-
> drivers/media/video/cx23885/cx23885-417.c | 2 +-
> drivers/media/video/cx88/cx88-blackbird.c | 2 +-
> drivers/media/video/ivtv/ivtv-cards.c | 2 +-
> drivers/media/video/mxb.c | 2 +-
> drivers/media/video/sn9c102/sn9c102_pas202bcb.c | 1 -
> drivers/misc/Kconfig | 4 ++--
> drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
> drivers/mtd/devices/lart.c | 2 +-
> drivers/mtd/ftl.c | 2 +-
> drivers/mtd/maps/Kconfig | 4 ++--
> drivers/mtd/nand/cafe_nand.c | 2 +-
> drivers/net/Kconfig | 21 ++++++++++-----------
> drivers/net/appletalk/Kconfig | 2 +-
> drivers/net/atp.c | 2 +-
> drivers/net/epic100.c | 4 ++--
> drivers/net/hamradio/Kconfig | 2 +-
> drivers/net/ibmlana.c | 2 +-
> drivers/net/irda/donauboe.h | 2 +-
> drivers/net/pci-skeleton.c | 2 +-
> drivers/net/pcmcia/3c574_cs.c | 2 +-
> drivers/net/sc92031.c | 2 +-
> drivers/net/tlan.c | 2 +-
> drivers/net/tokenring/tms380tr.c | 2 +-
> drivers/net/tulip/Kconfig | 2 +-
> drivers/net/usb/plusb.c | 2 +-
> drivers/net/wan/Kconfig | 2 +-
> drivers/net/wireless/ath/ath5k/ath5k.h | 2 +-
> drivers/net/wireless/ath/ath5k/reg.h | 1 -
> drivers/net/wireless/p54/Kconfig | 6 +++---
> drivers/net/wireless/prism54/islpci_hotplug.c | 2 +-
> drivers/parisc/README.dino | 3 +--
> drivers/pci/quirks.c | 3 ++-
> drivers/pcmcia/yenta_socket.c | 2 +-
> drivers/pnp/pnpbios/proc.c | 1 -
> drivers/scsi/Kconfig | 9 +++++----
> drivers/serial/8250.c | 2 +-
> drivers/serial/bfin_sport_uart.c | 2 +-
> drivers/serial/bfin_sport_uart.h | 2 +-
> drivers/serial/uartlite.c | 2 +-
> drivers/staging/asus_oled/README | 2 +-
> drivers/staging/asus_oled/asus_oled.c | 2 +-
> drivers/staging/comedi/drivers/cb_pcimdas.c | 2 +-
> drivers/staging/comedi/drivers/daqboard2000.c | 4 ++--
> drivers/staging/comedi/drivers/ni_labpc.c | 2 +-
> drivers/staging/comedi/drivers/ni_mio_common.c | 2 +-
> drivers/staging/comedi/drivers/plx9080.h | 2 +-
> drivers/staging/comedi/drivers/rtd520.c | 2 +-
> drivers/staging/quickstart/quickstart.c | 3 +--
> drivers/uio/Kconfig | 6 +++---
> drivers/usb/serial/Kconfig | 4 ++--
> drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++------
> drivers/usb/serial/keyspan.c | 2 +-
> drivers/usb/serial/keyspan.h | 2 +-
> drivers/usb/serial/mct_u232.h | 9 ++++-----
> drivers/usb/storage/Kconfig | 2 +-
> drivers/video/Kconfig | 10 +++++-----
> drivers/video/arcfb.c | 1 -
> drivers/video/epson1355fb.c | 2 +-
> drivers/video/fbcvt.c | 2 +-
> drivers/video/hecubafb.c | 2 +-
> drivers/video/metronomefb.c | 2 +-
> firmware/keyspan_pda/keyspan_pda.S | 2 +-
> firmware/keyspan_pda/xircom_pgs.S | 2 +-
> fs/hostfs/hostfs.h | 7 +------
> fs/partitions/ldm.c | 2 +-
> fs/partitions/ldm.h | 2 +-
> fs/reiserfs/Kconfig | 6 ++++--
> fs/reiserfs/README | 2 +-
> include/crypto/gf128mul.h | 4 ++--
> include/linux/fdreg.h | 2 +-
> include/linux/if_infiniband.h | 2 +-
> include/linux/n_r3964.h | 1 -
> net/ax25/Kconfig | 8 ++++----
> net/ipv4/Kconfig | 4 ++--
> net/ipv4/cipso_ipv4.c | 2 +-
> net/ipv4/fib_trie.c | 2 +-
> net/ipv4/netfilter/Kconfig | 2 +-
> net/ipv4/tcp_illinois.c | 2 +-
> net/ipv4/tcp_input.c | 4 ++--
> net/ipv4/tcp_veno.c | 2 +-
> net/netfilter/nf_conntrack_proto_tcp.c | 4 ++--
> sound/oss/ac97_codec.c | 7 ++-----
> sound/pci/ens1370.c | 2 +-
> sound/pci/intel8x0.c | 2 +-
> 135 files changed, 184 insertions(+), 209 deletions(-)
>
> diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
> index bf88f71..aa0e0c5 100644
> --- a/drivers/ata/pata_it821x.c
> +++ b/drivers/ata/pata_it821x.c
> @@ -15,8 +15,8 @@
> * May be copied or modified under the terms of the GNU General Public License
> * Based in part on the ITE vendor provided SCSI driver.
> *
> - * Documentation available from
> - * http://www.ite.com.tw/pc/IT8212F_V04.pdf
> + * Documentation available from IT8212F_V04.pdf
> + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
> * Some other documents are NDA.
> *
> * The ITE8212 isn't exactly a standard IDE controller. It has two
> diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
> index be7461c..31c6010 100644
> --- a/drivers/atm/Kconfig
> +++ b/drivers/atm/Kconfig
> @@ -301,7 +301,7 @@ config ATM_IA
> control memory (128K-1KVC, 512K-4KVC), the size of the packet
> memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
> UTP155, UTP25, DS3 and E3). Go to:
> - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
> + <http://www.iphase.com/>
> for more info about the cards. Say Y (or M to compile as a module
> named iphase) here if you have one of these cards.
>
> diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
> index 4b66c69..c8ad619 100644
> --- a/drivers/char/agp/Kconfig
> +++ b/drivers/char/agp/Kconfig
> @@ -34,7 +34,7 @@ config AGP_ALI
> X on the following ALi chipsets. The supported chipsets
> include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
> For the ALi-chipset question, ALi suggests you refer to
> - <http://www.ali.com.tw/eng/support/index.shtml>.
> + <http://www.ali.com.tw/>.
>
> The M1541 chipset can do AGP 1x and 2x, but note that there is an
> acknowledged incompatibility with Matrox G200 cards. Due to
> diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
> index e763d33..75b763c 100644
> --- a/drivers/char/agp/i460-agp.c
> +++ b/drivers/char/agp/i460-agp.c
> @@ -1,7 +1,7 @@
> /*
> * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of
> * the "Intel 460GTX Chipset Software Developer's Manual":
> - * http://developer.intel.com/design/itanium/downloads/24870401s.htm
> + * http://www.intel.com/design/archives/itanium/downloads/248704.htm
> */
> /*
> * 460GX support by Chris Ahna <christopher.j.ahna@...el.com>
> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
> index 033e150..0848ca9 100644
> --- a/drivers/char/apm-emulation.c
> +++ b/drivers/char/apm-emulation.c
> @@ -7,8 +7,8 @@
> * Intel Corporation, Microsoft Corporation. Advanced Power Management
> * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
> *
> - * [This document is available from Microsoft at:
> - * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
> + * This document is available from Microsoft at:
> + * http://www.microsoft.com/whdc/archive/amp_12.mspx
> */
> #include <linux/module.h>
> #include <linux/poll.h>
> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
> index 7b98c06..3ed20e8 100644
> --- a/drivers/char/ipmi/ipmi_bt_sm.c
> +++ b/drivers/char/ipmi/ipmi_bt_sm.c
> @@ -2,7 +2,7 @@
> * ipmi_bt_sm.c
> *
> * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
> - * of the driver architecture at http://sourceforge.net/project/openipmi
> + * of the driver architecture at http://sourceforge.net/projects/openipmi
> *
> * Author: Rocky Craig <first.last@...com>
> *
> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
> index 7bd7c45..3e94c37 100644
> --- a/drivers/char/ipmi/ipmi_si_intf.c
> +++ b/drivers/char/ipmi/ipmi_si_intf.c
> @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
>
> /*
> * Defined at
> - * http://h21007.www2.hp.com/portal/download/files
> - * /unprot/hpspmi.pdf
> + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
> */
> struct SPMITable {
> s8 Signature[4];
> diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
> index a98290d..88dda0c 100644
> --- a/drivers/char/n_r3964.c
> +++ b/drivers/char/n_r3964.c
> @@ -4,7 +4,6 @@
> * Copyright by
> * Philips Automation Projects
> * Kassel (Germany)
> - * http://www.pap-philips.de
> * -----------------------------------------------------------
> * This software may be used and distributed according to the terms of
> * the GNU General Public License, incorporated herein by reference.
> diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
> index ffa0efc..6614416 100644
> --- a/drivers/char/pcmcia/Kconfig
> +++ b/drivers/char/pcmcia/Kconfig
> @@ -28,7 +28,7 @@ config CARDMAN_4000
>
> This kernel driver requires additional userspace support, either
> by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
> - or via the cm4000 backend of OpenCT (http://www.opensc.com/).
> + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).
>
> config CARDMAN_4040
> tristate "Omnikey CardMan 4040 support"
> @@ -41,7 +41,7 @@ config CARDMAN_4040
> in I/O space. To use the kernel driver, you will need either the
> PC/SC ifdhandler provided from the Omnikey homepage
> (http://www.omnikey.com/), or a current development version of OpenCT
> - (http://www.opensc.org/).
> + (http://www.opensc-project.org/opensc).
>
> config IPWIRELESS
> tristate "IPWireless 3G UMTS PCMCIA card support"
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index 4dc338f..f6595ab 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -58,6 +58,6 @@ config TCG_INFINEON
> To compile this driver as a module, choose M here; the module
> will be called tpm_infineon.
> Further information on this driver and the supported hardware
> - can be found at http://www.prosec.rub.de/tpm
> + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
>
> endif # TCG_TPM
> diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
> index f584407..76da32e 100644
> --- a/drivers/char/tpm/tpm_infineon.c
> +++ b/drivers/char/tpm/tpm_infineon.c
> @@ -7,7 +7,7 @@
> * Copyright (C) 2005, Marcel Selhorst <m.selhorst@...rix.com>
> * Sirrix AG - security technologies, http://www.sirrix.com and
> * Applied Data Security Group, Ruhr-University Bochum, Germany
> - * Project-Homepage: http://www.prosec.rub.de/tpm
> + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
> *
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of the GNU General Public License as
> diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
> index 0709681..413f0df 100644
> --- a/drivers/edac/edac_device_sysfs.c
> +++ b/drivers/edac/edac_device_sysfs.c
> @@ -1,7 +1,7 @@
> /*
> * file for managing the edac_device class of devices for EDAC
> *
> - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)
> + * (C) 2007 SoftwareBitMaker
> *
> * This file may be distributed under the terms of the
> * GNU General Public License.
> diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
> index a2fa1fe..678405a 100644
> --- a/drivers/edac/i82443bxgx_edac.c
> +++ b/drivers/edac/i82443bxgx_edac.c
> @@ -12,7 +12,7 @@
> * 440GX fix by Jason Uhlenkott <juhlenko@...mai.com>.
> *
> * Written with reference to 82443BX Host Bridge Datasheet:
> - * http://www.intel.com/design/chipsets/440/documentation.htm
> + * http://download.intel.com/design/chipsets/datashts/29063301.pdf
> * references to this document given in [].
> *
> * This module doesn't support the 440LX, but it may be possible to
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 280c9b5..32e67a1 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -73,8 +73,8 @@ config EFI_PCDP
> on how the driver discovers devices.
>
> You must also enable the appropriate drivers (serial, VGA, etc.)
> -
> - See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
> + See DIG64_HCDPv20_042804.pdf available from
> + <http://www.dig64.org/specifications/>
>
> config DELL_RBU
> tristate "BIOS update support for DELL systems via sysfs"
> diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
> index f287fe7..96c25d9 100644
> --- a/drivers/firmware/edd.c
> +++ b/drivers/firmware/edd.c
> @@ -15,7 +15,7 @@
> * made in setup.S, copied to safe structures in setup.c,
> * and presents it in sysfs.
> *
> - * Please see http://linux.dell.com/edd30/results.html for
> + * Please see http://linux.dell.com/edd/results.html for
> * the list of BIOSs which have been reported to implement EDD.
> *
> * This program is free software; you can redistribute it and/or modify
> diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
> index ce910d6..e098c6e 100644
> --- a/drivers/firmware/pcdp.h
> +++ b/drivers/firmware/pcdp.h
> @@ -1,8 +1,8 @@
> /*
> * Definitions for PCDP-defined console devices
> *
> - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
> - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
> + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.),
> + * please see <http://www.dig64.org/specifications/>
> *
> * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
> * Khalid Aziz <khalid.aziz@...com>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 949326d..58e65f9 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
> * according to the hdisplay, vdisplay, vrefresh.
> * It is based from the VESA(TM) Coordinated Video Timing Generator by
> * Graham Loveridge April 9, 2003 available at
> - * http://www.vesa.org/public/CVT/CVTd6r1.xls
> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> *
> * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
> * What I have done is to translate it by using integer calculation.
> diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
> index 251b631..60befc0 100644
> --- a/drivers/hwmon/adm1025.c
> +++ b/drivers/hwmon/adm1025.c
> @@ -12,7 +12,7 @@
> * resolution of about 0.5% of the nominal value). Temperature values are
> * reported with a 1 deg resolution and a 3 deg accuracy. Complete
> * datasheet can be obtained from Analog's website at:
> - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025
> *
> * This driver also supports the ADM1025A, which differs from the ADM1025
> * only in that it has "open-drain VID inputs while the ADM1025 has
> diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
> index 65335b2..4bf969c 100644
> --- a/drivers/hwmon/adm1026.c
> +++ b/drivers/hwmon/adm1026.c
> @@ -6,7 +6,7 @@
>
> Chip details at:
>
> - <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
> + <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026>
>
> This program is free software; you can redistribute it and/or modify
> it under the terms of the GNU General Public License as published by
> diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
> index 9638d58..95cbfb3 100644
> --- a/drivers/hwmon/f75375s.c
> +++ b/drivers/hwmon/f75375s.c
> @@ -6,10 +6,10 @@
> * Datasheets available at:
> *
> * f75375:
> - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
> + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
> *
> * f75373:
> - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
> + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
> index 1f63d1a..1d6a6fa 100644
> --- a/drivers/hwmon/g760a.c
> +++ b/drivers/hwmon/g760a.c
> @@ -5,7 +5,7 @@
> Copyright (C) 2007 Herbert Valerio Riedel <hvr@....org>
>
> Complete datasheet is available at GMT's website:
> - http://www.gmt.com.tw/datasheet/g760a.pdf
> + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
>
> This program is free software; you can redistribute it and/or modify
> it under the terms of the GNU General Public License as published by
> diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
> index bf0862a..897702d 100644
> --- a/drivers/hwmon/hwmon-vid.c
> +++ b/drivers/hwmon/hwmon-vid.c
> @@ -38,7 +38,7 @@
> * available at http://developer.intel.com/.
> *
> * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
> - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
> + * http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx
> * Table 74. VID Code Voltages
> * This corresponds to an arbitrary VRM code of 24 in the functions below.
> * These CPU models (K8 revision <= E) have 5 VID pins. See also:
> diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
> index 4516369..97d98fb 100644
> --- a/drivers/ide/hpt366.c
> +++ b/drivers/ide/hpt366.c
> @@ -12,7 +12,7 @@
> *
> *
> * HighPoint has its own drivers (open source except for the RAID part)
> - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
> + * available from http://www.highpoint-tech.com/USA_new/service_support.htm
> * This may be useful to anyone wanting to work on this driver, however do not
> * trust them too much since the code tends to become less and less meaningful
> * as the time passes... :-/
> diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
> index d81e496..808bcdc 100644
> --- a/drivers/ide/ht6560b.c
> +++ b/drivers/ide/ht6560b.c
> @@ -10,7 +10,6 @@
> * Author: Mikko Ala-Fossi <maf@....fi>
> * Jan Evert van Grootheest <j.e.van.grootheest@...way.nl>
> *
> - * Try: http://www.maf.iki.fi/~maf/ht6560b/
> */
>
> #define DRV_NAME "ht6560b"
> diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
> index 89d70de..6e35ecc 100644
> --- a/drivers/infiniband/Kconfig
> +++ b/drivers/infiniband/Kconfig
> @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD
> Userspace InfiniBand Management Datagram (MAD) support. This
> is the kernel side of the userspace MAD support, which allows
> userspace processes to send and receive MADs. You will also
> - need libibumad from <http://www.openib.org>.
> + need libibumad from <http://www.openfabrics.org/downloads/management/>.
>
> config INFINIBAND_USER_ACCESS
> tristate "InfiniBand userspace access (verbs and CM)"
> @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS
> to set up connections and directly access InfiniBand
> hardware for fast-path operations. You will also need
> libibverbs, libibcm and a hardware driver library from
> - <http://www.openib.org>.
> + <http://www.openfabrics.org/git/>.
>
> config INFINIBAND_USER_MEM
> bool
> diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig
> index 2acec3f..2b6352b 100644
> --- a/drivers/infiniband/hw/cxgb3/Kconfig
> +++ b/drivers/infiniband/hw/cxgb3/Kconfig
> @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3
> our website at <http://www.chelsio.com>.
>
> For customer support, please visit our customer support page at
> - <http://www.chelsio.com/support.htm>.
> + <http://www.chelsio.com/support.html>.
>
> Please send feedback to <linux-bugs@...lsio.com>.
>
> diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig
> index ccb85ea..6b7e6c5 100644
> --- a/drivers/infiniband/hw/cxgb4/Kconfig
> +++ b/drivers/infiniband/hw/cxgb4/Kconfig
> @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4
> our website at <http://www.chelsio.com>.
>
> For customer support, please visit our customer support page at
> - <http://www.chelsio.com/support.htm>.
> + <http://www.chelsio.com/support.html>.
>
> Please send feedback to <linux-bugs@...lsio.com>.
>
> diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
> index b411c51..d00af71 100644
> --- a/drivers/infiniband/ulp/iser/Kconfig
> +++ b/drivers/infiniband/ulp/iser/Kconfig
> @@ -9,4 +9,4 @@ config INFINIBAND_ISER
>
> The iSER protocol is defined by IETF.
> See <http://www.ietf.org/rfc/rfc5046.txt>
> - and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF>
> + and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>
> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
> index 0ffaf2c..e68e497 100644
> --- a/drivers/input/joystick/gamecon.c
> +++ b/drivers/input/joystick/gamecon.c
> @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc)
> * PSX support
> *
> * See documentation at:
> - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
> + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt
> * http://www.gamesx.com/controldata/psxcont/psxcont.htm
> - * ftp://milano.usal.es/pablo/
> *
> */
>
> diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
> index 2b0eba6..b09c7d1 100644
> --- a/drivers/input/misc/cm109.c
> +++ b/drivers/input/misc/cm109.c
> @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode)
>
> /*
> * Keymap for ATCom AU-100
> - * http://www.atcom.cn/En_products_AU100.html
> + * http://www.atcom.cn/products.html
> * http://www.packetizer.com/products/au100/
> * http://www.voip-info.org/wiki/view/AU-100
> *
> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> index c714ca2..bf5fd7f 100644
> --- a/drivers/input/mouse/Kconfig
> +++ b/drivers/input/mouse/Kconfig
> @@ -30,6 +30,7 @@ config MOUSE_PS2
> <http://w1.894.telia.com/~u89404340/touchpad/index.html>
> and a new version of GPM at:
> <http://www.geocities.com/dt_or/gpm/gpm.html>
> + <http://xorg.freedesktop.org/archive/individual/driver/>
> to take advantage of the advanced features of the touchpad.
>
> If unsure, say Y.
> diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
> index 88121c5..1fd8f5e 100644
> --- a/drivers/input/mouse/touchkit_ps2.c
> +++ b/drivers/input/mouse/touchkit_ps2.c
> @@ -21,8 +21,8 @@
> *
> * Based upon touchkitusb.c
> *
> - * Vendor documentation is available in support section of:
> - * http://www.egalax.com.tw/
> + * Vendor documentation is available at:
> + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf
> */
>
> #include <linux/kernel.h>
> diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
> index efd3aeb..36e57de 100644
> --- a/drivers/input/touchscreen/mk712.c
> +++ b/drivers/input/touchscreen/mk712.c
> @@ -17,7 +17,7 @@
> * found in Gateway AOL Connected Touchpad computers.
> *
> * Documentation for ICS MK712 can be found at:
> - * http://www.icst.com/pdf/mk712.pdf
> + * http://www.idt.com/products/getDoc.cfm?docID=18713923
> */
>
> /*
> diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c
> index 861bdf3..d501393 100644
> --- a/drivers/isdn/i4l/isdn_audio.c
> +++ b/drivers/isdn/i4l/isdn_audio.c
> @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in,
>
> /*
> * Goertzel algorithm.
> - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/
> + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/
> * for more info.
> * Result is stored into an sk_buff and queued up for later
> * evaluation.
> diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
> index d0d2213..9e3e2c5 100644
> --- a/drivers/macintosh/therm_adt746x.c
> +++ b/drivers/macintosh/therm_adt746x.c
> @@ -3,9 +3,9 @@
> *
> * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
> *
> - * Documentation from
> - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
> - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
> + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf
> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
> *
> */
>
> diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c
> index 1e9fbfa..0f590b3 100644
> --- a/drivers/media/IR/keymaps/rc-manli.c
> +++ b/drivers/media/IR/keymaps/rc-manli.c
> @@ -13,7 +13,6 @@
> #include <media/rc-map.h>
>
> /* Michael Tokarev <mjt@....msk.ru>
> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
> keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
> least, and probably other cards too.
> The "ascii-art picture" below (in comments, first row
> diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
> index a6be529..87279d9 100644
> --- a/drivers/media/dvb/ttpci/av7110.c
> +++ b/drivers/media/dvb/ttpci/av7110.c
> @@ -26,7 +26,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
>
> @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110)
> /* Budgetpatch note:
> * Original hardware design by Roberto Deza:
> * There is a DVB_Wiki at
> - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
> - * where is described this 'DVB TT Budget Patch', on Card Modding:
> - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
> - * On the short description there is also a link to a external file,
> - * with more details:
> - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
> - *
> + * http://www.linuxtv.org/
> * New software triggering design by Emard that works on
> * original Roberto Deza's hardware:
> *
> diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
> index 13efba9..878da6a 100644
> --- a/drivers/media/dvb/ttpci/av7110_av.c
> +++ b/drivers/media/dvb/ttpci/av7110_av.c
> @@ -25,7 +25,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include <linux/types.h>
> diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
> index 4eba35a..7564c26 100644
> --- a/drivers/media/dvb/ttpci/av7110_ca.c
> +++ b/drivers/media/dvb/ttpci/av7110_ca.c
> @@ -25,7 +25,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include <linux/kernel.h>
> diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
> index e162691..f1cbfe5 100644
> --- a/drivers/media/dvb/ttpci/av7110_hw.c
> +++ b/drivers/media/dvb/ttpci/av7110_hw.c
> @@ -22,7 +22,7 @@
> * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> /* for debugging ARM communication: */
> diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
> index 8986d96..ac20c5b 100644
> --- a/drivers/media/dvb/ttpci/av7110_v4l.c
> +++ b/drivers/media/dvb/ttpci/av7110_v4l.c
> @@ -22,7 +22,7 @@
> * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include <linux/kernel.h>
> diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
> index 983672a..97afc01 100644
> --- a/drivers/media/dvb/ttpci/budget-av.c
> +++ b/drivers/media/dvb/ttpci/budget-av.c
> @@ -30,7 +30,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include "budget.h"
> diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
> index 13ac9e3..a9c2c32 100644
> --- a/drivers/media/dvb/ttpci/budget-ci.c
> +++ b/drivers/media/dvb/ttpci/budget-ci.c
> @@ -26,7 +26,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include <linux/module.h>
> diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
> index ba18e56..0546613 100644
> --- a/drivers/media/dvb/ttpci/budget-core.c
> +++ b/drivers/media/dvb/ttpci/budget-core.c
> @@ -31,7 +31,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
>
> diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
> index 9c92f9d..5798355 100644
> --- a/drivers/media/dvb/ttpci/budget-patch.c
> +++ b/drivers/media/dvb/ttpci/budget-patch.c
> @@ -27,7 +27,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include "av7110.h"
> diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
> index 874a10a..d238fb9 100644
> --- a/drivers/media/dvb/ttpci/budget.c
> +++ b/drivers/media/dvb/ttpci/budget.c
> @@ -31,7 +31,7 @@
> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
> *
> *
> - * the project's page is at http://www.linuxtv.org/dvb/
> + * the project's page is at http://www.linuxtv.org/
> */
>
> #include "budget.h"
> diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
> index 4349213..255d40d 100644
> --- a/drivers/media/radio/radio-maxiradio.c
> +++ b/drivers/media/radio/radio-maxiradio.c
> @@ -13,7 +13,7 @@
> * anybody does please mail me.
> *
> * For the pdf file see:
> - * http://www.semiconductors.philips.com/pip/TEA5757H/V1
> + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
> *
> *
> * CHANGES:
> diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
> index 0343928..a5363ed 100644
> --- a/drivers/media/radio/radio-typhoon.c
> +++ b/drivers/media/radio/radio-typhoon.c
> @@ -1,8 +1,6 @@
> /* Typhoon Radio Card driver for radio support
> * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@....de>
> *
> - * Card manufacturer:
> - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
> *
> * Notes on the hardware
> *
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index f6e4d04..d000522 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -978,7 +978,7 @@ config USB_STKWEBCAM
> Supported devices are typically found in some Asus laptops,
> with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
> may be supported by the stk11xx driver, from which this is
> - derived, see http://stk11xx.sourceforge.net
> + derived, see <http://sourceforge.net/projects/syntekdriver/>
>
> To compile this driver as a module, choose M here: the
> module will be called stkwebcam.
> diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
> index be35e69..9536f1a 100644
> --- a/drivers/media/video/cafe_ccic.c
> +++ b/drivers/media/video/cafe_ccic.c
> @@ -4,7 +4,7 @@
> * sensor.
> *
> * The data sheet for this device can be found at:
> - * http://www.marvell.com/products/pcconn/88ALP01.jsp
> + * http://www.marvell.com/products/pc_connectivity/88alp01/
> *
> * Copyright 2006 One Laptop Per Child Association, Inc.
> * Copyright 2006-7 Jonathan Corbet <corbet@....net>
> diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
> index 6b805af..fe10909 100644
> --- a/drivers/media/video/cx18/cx18-cards.c
> +++ b/drivers/media/video/cx18/cx18-cards.c
> @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
> .tv = { 0x61, 0x60, I2C_CLIENT_END },
> };
>
> -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
> +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
> This keeps the PCI ID database up to date. Note that the entries
> must be added under vendor 0x4444 (Conexant) as subsystem IDs.
> New vendor IDs should still be added to the vendor ID list. */
> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
> index abd64e8..53a6782 100644
> --- a/drivers/media/video/cx23885/cx23885-417.c
> +++ b/drivers/media/video/cx23885/cx23885-417.c
> @@ -7,7 +7,7 @@
> * (c) 2008 Steven Toth <stoth@...uxtv.org>
> * - CX23885/7/8 support
> *
> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
> index e46e1ce..660b2a9 100644
> --- a/drivers/media/video/cx88/cx88-blackbird.c
> +++ b/drivers/media/video/cx88/cx88-blackbird.c
> @@ -9,7 +9,7 @@
> * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@...radead.org>
> * - video_ioctl2 conversion
> *
> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
> index ca1fd32..87afbbe 100644
> --- a/drivers/media/video/ivtv/ivtv-cards.c
> +++ b/drivers/media/video/ivtv/ivtv-cards.c
> @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = {
>
> /********************** card configuration *******************************/
>
> -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
> +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
> This keeps the PCI ID database up to date. Note that the entries
> must be added under vendor 0x4444 (Conexant) as subsystem IDs.
> New vendor IDs should still be added to the vendor ID list. */
> diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
> index ef0c817..b1dbcf1 100644
> --- a/drivers/media/video/mxb.c
> +++ b/drivers/media/video/mxb.c
> @@ -3,7 +3,7 @@
>
> Copyright (C) 1998-2006 Michael Hunold <michael@...u.de>
>
> - Visit http://www.mihu.de/linux/saa7146/mxb/
> + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
> for further details about this card.
>
> This program is free software; you can redistribute it and/or modify
> diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> index 2782f94..2e86fdc 100644
> --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
> @@ -4,7 +4,6 @@
> * *
> * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio *
> * <medaglia@...l.org.br> *
> - * http://cadu.homelinux.com:8080/ *
> * *
> * Support for SN9C103, DAC Magnitude, exposure and green gain controls *
> * added by Luca Risolia <luca.risolia@...dio.unibo.it> *
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index b743312..3b28933 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -112,8 +112,8 @@ config IBM_ASM
>
> WARNING: This software may not be supported or function
> correctly on your IBM server. Please consult the IBM ServerProven
> - website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
> - information on the specific driver level and support statement
> + website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
> + for information on the specific driver level and support statement
> for your IBM server.
>
> config PHANTOM
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
> index 3e6c47b..ba29d2f 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
>
> /*
> * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
> - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
> - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
> + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19
> + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
> * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
> */
> if (extp->MajorVersion != '1' ||
> diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
> index f4359fe..caf6041 100644
> --- a/drivers/mtd/devices/lart.c
> +++ b/drivers/mtd/devices/lart.c
> @@ -17,7 +17,7 @@
> * - January 2000
> *
> * [2] MTD internal API documentation
> - * - http://www.linux-mtd.infradead.org/tech/
> + * - http://www.linux-mtd.infradead.org/
> *
> * Limitations:
> *
> diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
> index 4d6a64c..037b399 100644
> --- a/drivers/mtd/ftl.c
> +++ b/drivers/mtd/ftl.c
> @@ -51,7 +51,7 @@
>
> Use of the FTL format for non-PCMCIA applications may be an
> infringement of these patents. For additional information,
> - contact M-Systems (http://www.m-sys.com) directly.
> + contact M-Systems directly. M-Systems since acquired by Sandisk.
>
> ======================================================================*/
> #include <linux/mtd/blktrans.h>
> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
> index 701d942..9622126 100644
> --- a/drivers/mtd/maps/Kconfig
> +++ b/drivers/mtd/maps/Kconfig
> @@ -172,7 +172,7 @@ config MTD_OCTAGON
> This provides a 'mapping' driver which supports the way in which
> the flash chips are connected in the Octagon-5066 Single Board
> Computer. More information on the board is available at
> - <http://www.octagonsystems.com/CPUpages/5066.html>.
> + <http://www.octagonsystems.com/products/5066.aspx>.
>
> config MTD_VMAX
> tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
> @@ -284,7 +284,7 @@ config MTD_TQM8XXL
> chips, currently uses AMD one. This 'mapping' driver supports
> that arrangement, allowing the CFI probe and command set driver
> code to communicate with the chips on the TQM8xxL board. More at
> - <http://www.denx.de/embedded-ppc-en.html>.
> + <http://www.denx.de/wiki/PPCEmbedded/>.
>
> config MTD_RPXLITE
> tristate "CFI Flash device mapped on RPX Lite or CLLF"
> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
> index db1dfc5..e06c898 100644
> --- a/drivers/mtd/nand/cafe_nand.c
> +++ b/drivers/mtd/nand/cafe_nand.c
> @@ -2,7 +2,7 @@
> * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
> *
> * The data sheet for this device can be found at:
> - * http://www.marvell.com/products/pcconn/88ALP01.jsp
> + * http://wiki.laptop.org/go/Datasheets
> *
> * Copyright © 2006 Red Hat, Inc.
> * Copyright © 2006 David Woodhouse <dwmw2@...radead.org>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 2cc81a5..5b66842 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -921,7 +921,7 @@ config SMC91X
> including the SMC91C94 and the SMC91C111. Say Y if you want it
> compiled into the kernel, and read the file
> <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
> - available from <http://www.linuxdoc.org/docs.html#howto>.
> + available from <http://www.tldp.org/docs.html#howto>.
>
> This driver is also available as a module ( = code which can be
> inserted in and removed from the running kernel whenever you want).
> @@ -1031,7 +1031,7 @@ config SMC911X
> including the new LAN9115, LAN9116, LAN9117, and LAN9118.
> Say Y if you want it compiled into the kernel,
> and read the Ethernet-HOWTO, available from
> - <http://www.linuxdoc.org/docs.html#howto>.
> + <http://www.tldp.org/docs.html#howto>.
>
> This driver is also available as a module. The module will be
> called smc911x. If you want to compile it as a module, say M
> @@ -1513,7 +1513,7 @@ config E100
>
> For the latest Intel PRO/100 network driver for Linux, see:
>
> - <http://appsr.intel.com/scripts-df/support_intel.asp>
> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
>
> More specific information on configuring the driver is in
> <file:Documentation/networking/e100.txt>.
> @@ -1539,9 +1539,8 @@ config FEALNX
> select CRC32
> select MII
> help
> - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
> - cards. Specifications and data at
> - <http://www.myson.com.hk/mtd/datasheet/>.
> + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
> + cards. <http://www.myson.com.tw/>
>
> config NATSEMI
> tristate "National Semiconductor DP8381x series PCI Ethernet support"
> @@ -1715,7 +1714,7 @@ config SMSC9420
> This is a driver for SMSC's LAN9420 PCI ethernet adapter.
> Say Y if you want it compiled into the kernel,
> and read the Ethernet-HOWTO, available from
> - <http://www.linuxdoc.org/docs.html#howto>.
> + <http://www.tldp.org/docs.html#howto>.
>
> This driver is also available as a module. The module will be
> called smsc9420. If you want to compile it as a module, say M
> @@ -2550,7 +2549,7 @@ config CHELSIO_T1
> our website at <http://www.chelsio.com>.
>
> For customer support, please visit our customer support page at
> - <http://www.chelsio.com/support.htm>.
> + <http://www.chelsio.com/support.html>.
>
> Please send feedback to <linux-bugs@...lsio.com>.
>
> @@ -2582,7 +2581,7 @@ config CHELSIO_T3
> our website at <http://www.chelsio.com>.
>
> For customer support, please visit our customer support page at
> - <http://www.chelsio.com/support.htm>.
> + <http://www.chelsio.com/support.html>.
>
> Please send feedback to <linux-bugs@...lsio.com>.
>
> @@ -2607,7 +2606,7 @@ config CHELSIO_T4
> our website at <http://www.chelsio.com>.
>
> For customer support, please visit our customer support page at
> - <http://www.chelsio.com/support.htm>.
> + <http://www.chelsio.com/support.html>.
>
> Please send feedback to <linux-bugs@...lsio.com>.
>
> @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF
> our website at <http://www.chelsio.com>.
>
> For customer support, please visit our customer support page at
> - <http://www.chelsio.com/support.htm>.
> + <http://www.chelsio.com/support.html>.
>
> Please send feedback to <linux-bugs@...lsio.com>.
>
> diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
> index 0a0e0cd..f5a8916 100644
> --- a/drivers/net/appletalk/Kconfig
> +++ b/drivers/net/appletalk/Kconfig
> @@ -18,7 +18,7 @@ config ATALK
>
> General information about how to connect Linux, Windows machines and
> Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
> - NET-3-HOWTO, available from
> + NET3-4-HOWTO, available from
> <http://www.tldp.org/docs.html#howto>, contains valuable
> information as well.
>
> diff --git a/drivers/net/atp.c b/drivers/net/atp.c
> index bd2f9d3..0eee044 100644
> --- a/drivers/net/atp.c
> +++ b/drivers/net/atp.c
> @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */
>
> In 1997 Realtek made available the documentation for the second generation
> RTL8012 chip, which has lead to several driver improvements.
> - http://www.realtek.com.tw/cn/cn.html
> + http://www.realtek.com.tw/
>
> Theory of Operation
>
> diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
> index 57c8ac0..c6e2571 100644
> --- a/drivers/net/epic100.c
> +++ b/drivers/net/epic100.c
> @@ -131,8 +131,8 @@ IIIa. Ring buffers
>
> IVb. References
>
> -http://www.smsc.com/main/tools/discontinued/83c171.pdf
> -http://www.smsc.com/main/tools/discontinued/83c175.pdf
> +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
> +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
> http://scyld.com/expert/NWay.html
> http://www.national.com/pf/DP/DP83840A.html
>
> diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
> index 62d5d5c..95dbcfd 100644
> --- a/drivers/net/hamradio/Kconfig
> +++ b/drivers/net/hamradio/Kconfig
> @@ -73,7 +73,7 @@ config DMASCC
> certain parameters, such as channel access timing, clock mode, and
> DMA channel. This is accomplished with a small utility program,
> dmascc_cfg, available at
> - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
> + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
> get at least version 1.27 of dmascc_cfg, as older versions will not
> work with the current driver.
>
> diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
> index 294ccfb..8de3273 100644
> --- a/drivers/net/ibmlana.c
> +++ b/drivers/net/ibmlana.c
> @@ -23,7 +23,7 @@ paper sources:
> 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
> Document Number SC30-3661-00' by IBM for info on the adapter itself
>
> - Also see http://www.natsemi.com/
> + Also see http://www.national.com/analog
>
> special acknowledgements to:
> - Bob Eager for helping me out with documentation from IBM
> diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
> index 36c3060..4dc39e5 100644
> --- a/drivers/net/irda/donauboe.h
> +++ b/drivers/net/irda/donauboe.h
> @@ -54,7 +54,7 @@
> /* anyone who has. HOWEVER the chip bears a striking resemblence */
> /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
> /* the documentation for this is freely available at */
> -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
> +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
> /* The mapping between the registers in that document and the */
> /* Registers in the 701 oboe chip are as follows */
>
> diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
> index 56f3fc4..627b619 100644
> --- a/drivers/net/pci-skeleton.c
> +++ b/drivers/net/pci-skeleton.c
> @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer.
>
> IVb. References
>
> -http://www.realtek.com.tw/cn/cn.html
> +http://www.realtek.com.tw/
> http://www.scyld.com/expert/NWay.html
>
> IVc. Errata
> diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
> index c683f77..e092679 100644
> --- a/drivers/net/pcmcia/3c574_cs.c
> +++ b/drivers/net/pcmcia/3c574_cs.c
> @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
> V. References
>
> http://www.scyld.com/expert/NWay.html
> -http://www.national.com/pf/DP/DP83840.html
> +http://www.national.com/opf/DP/DP83840A.html
>
> Thanks to Terry Murphy of 3Com for providing development information for
> earlier 3Com products.
> diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
> index 8c4067a..12fb560 100644
> --- a/drivers/net/sc92031.c
> +++ b/drivers/net/sc92031.c
> @@ -15,7 +15,7 @@
> * Rewritten for 2.6 by Cesar Eduardo Barros
> *
> * A datasheet for this chip can be found at
> - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
> + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf
> */
>
> /* Note about set_mac_address: I don't know how to change the hardware
> diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
> index ccee3ed..ef000b2 100644
> --- a/drivers/net/tlan.c
> +++ b/drivers/net/tlan.c
> @@ -78,7 +78,7 @@
> * - Updated tlan.txt accordingly.
> * - Adjusted minimum/maximum frame length.
> * - There is now a TLAN website up at
> - * http://tlan.kernel.dk
> + * http://hp.sourceforge.net/
> *
> * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
> * reports PHY information when used with Donald
> diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
> index 435ef7d..ccc16d6 100644
> --- a/drivers/net/tokenring/tms380tr.c
> +++ b/drivers/net/tokenring/tms380tr.c
> @@ -5,7 +5,7 @@
> * Originally sktr.c: Written 1997 by Christoph Goos
> *
> * A fine result of the Linux Systems Network Architecture Project.
> - * http://www.linux-sna.org
> + * http://www.vanheusden.com/sna/
> *
> * This software may be used and distributed according to the terms
> * of the GNU General Public License, incorporated herein by reference.
> diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
> index 516713f..14c02e1 100644
> --- a/drivers/net/tulip/Kconfig
> +++ b/drivers/net/tulip/Kconfig
> @@ -151,7 +151,7 @@ config ULI526X
> select CRC32
> ---help---
> This driver is for ULi M5261/M5263 10/100M Ethernet Controller
> - (<http://www.uli.com.tw/>).
> + (<http://www.nvidia.com/page/uli_drivers.html>).
>
> To compile this driver as a module, choose M here. The module will
> be called uli526x.
> diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
> index 08555f8..08ad269 100644
> --- a/drivers/net/usb/plusb.c
> +++ b/drivers/net/usb/plusb.c
> @@ -32,7 +32,7 @@
>
>
> /*
> - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
> + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
> *
> * The protocol and handshaking used here should be bug-compatible
> * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
> diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
> index d08ce6a..423eb26 100644
> --- a/drivers/net/wan/Kconfig
> +++ b/drivers/net/wan/Kconfig
> @@ -409,7 +409,7 @@ config CYCLADES_SYNC
> tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
> depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
> ---help---
> - Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an
> + Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an
> intelligent multiprotocol WAN adapter with data transfer rates up to
> 512 Kbps. These cards support the X.25 and SNA related protocols.
>
> diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
> index ea6362a..97659a0 100644
> --- a/drivers/net/wireless/ath/ath5k/ath5k.h
> +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
> @@ -351,7 +351,7 @@ struct ath5k_srev_name {
> /*
> * Some of this information is based on Documentation from:
> *
> - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
> + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
> *
> * Modulation for Atheros' eXtended Range - range enhancing extension that is
> * supposed to double the distance an Atheros client device can keep a
> diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
> index 55b4ac6..69a9b34 100644
> --- a/drivers/net/wireless/ath/ath5k/reg.h
> +++ b/drivers/net/wireless/ath/ath5k/reg.h
> @@ -26,7 +26,6 @@
> * Atheros presentations and papers like these:
> *
> * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
> - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
> *
> * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
> *
> diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
> index b0342a5..8e82379 100644
> --- a/drivers/net/wireless/p54/Kconfig
> +++ b/drivers/net/wireless/p54/Kconfig
> @@ -8,7 +8,7 @@ config P54_COMMON
> also need to be enabled in order to support any devices.
>
> These devices require softmac firmware which can be found at
> - http://prism54.org/
> + <http://wireless.kernel.org/en/users/Drivers/p54>
>
> If you choose to build a module, it'll be called p54common.
>
> @@ -20,7 +20,7 @@ config P54_USB
> This driver is for USB isl38xx based wireless cards.
>
> These devices require softmac firmware which can be found at
> - http://prism54.org/
> + <http://wireless.kernel.org/en/users/Drivers/p54>
>
> If you choose to build a module, it'll be called p54usb.
>
> @@ -34,7 +34,7 @@ config P54_PCI
> supported by the fullmac driver/firmware.
>
> This driver requires softmac firmware which can be found at
> - http://prism54.org/
> + <http://wireless.kernel.org/en/users/Drivers/p54>
>
> If you choose to build a module, it'll be called p54pci.
>
> diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
> index dc14420..b5e64d7 100644
> --- a/drivers/net/wireless/prism54/islpci_hotplug.c
> +++ b/drivers/net/wireless/prism54/islpci_hotplug.c
> @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
> /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
> * driver_data
> * If you have an update for this please contact prism54-devel@...sm54.org
> - * The latest list can be found at http://prism54.org/supported_cards.php */
> + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
> static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
> /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
> {
> diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino
> index 097324f..1627426 100644
> --- a/drivers/parisc/README.dino
> +++ b/drivers/parisc/README.dino
> @@ -10,8 +10,7 @@
> ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
> ** not affected."
> **
> -** REVISIT: "go/pci_defect" link below is stale.
> -** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/>
> +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443
> **
> ** Product First Good Serial Number
> ** C200/C240 (US) US67350000
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 89ed181..dcc333f 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir
> * VIA Apollo KT133 needs PCI latency patch
> * Made according to a windows driver based patch by George E. Breese
> * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
> + * and http://www.georgebreese.com/net/software/#PCI
> * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
> * the info on which Mr Breese based his work.
> *
> @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge)
> /*
> * Common misconfiguration of the MediaGX/Geode PCI master that will
> * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
> - * datasheets found at http://www.national.com/ds/GX for info on what
> + * datasheets found at http://www.national.com/analog for info on what
> * these bits do. <christer@...nigel.se>
> */
> static void quirk_mediagx_master(struct pci_dev *dev)
> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
> index 414d9a6..91a7225 100644
> --- a/drivers/pcmcia/yenta_socket.c
> +++ b/drivers/pcmcia/yenta_socket.c
> @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket)
> * invisible during PCI scans because of a misconfigured subordinate number
> * of the parent brige - some BIOSes seem to be too lazy to set it right.
> * Does the fixup carefully by checking how far it can go without conflicts.
> - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
> + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
> */
> static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
> {
> diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c
> index 2d8ac43..bc89f39 100644
> --- a/drivers/pnp/pnpbios/proc.c
> +++ b/drivers/pnp/pnpbios/proc.c
> @@ -11,7 +11,6 @@
> *
> * The .../escd file is utilized by the lsescd utility written by
> * Gunther Mayer.
> - * http://home.t-online.de/home/gunther.mayer/lsescd
> *
> * The .../legacy_device_resources file is not used yet.
> *
> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> index bbf91ae..03453d4 100644
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -116,7 +116,7 @@ config CHR_DEV_OSST
> <http://www.tldp.org/docs.html#howto> and
> <file:Documentation/scsi/osst.txt> in the kernel source.
> More info on the OnStream driver may be found on
> - <http://linux1.onstream.nl/test/>
> + <http://sourceforge.net/projects/osst/>
> Please also have a look at the standard st docu, as most of it
> applies to osst as well.
>
> @@ -156,9 +156,9 @@ config CHR_DEV_SG
> directly, so you need some additional software which knows how to
> talk to these devices using the SCSI protocol:
>
> - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
> + For scanners, look at SANE (<http://www.sane-project.org/>). For CD
> writer software look at Cdrtools
> - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
> + (<http://cdrecord.berlios.de/private/cdrecord.html>)
> and for burning a "disk at once": CDRDAO
> (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
> quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
> @@ -950,6 +950,7 @@ config SCSI_IPS
> ---help---
> This is support for the IBM ServeRAID hardware RAID controllers.
> See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
> + and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
> for more information. If this driver does not work correctly
> without modification please contact the author by email at
> <ipslinux@...ptec.com>.
> @@ -1609,7 +1610,7 @@ config SCSI_DEBUG
> host adapter with one dummy SCSI disk. Each dummy disk uses kernel
> RAM as storage (i.e. it is a ramdisk). To save space when multiple
> dummy disks are simulated, they share the same kernel RAM for
> - their storage. See <http://www.torque.net/sg/sdebug.html> for more
> + their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more
> information. This driver is primarily of use to those testing the
> SCSI and block subsystems. If unsure, say N.
>
> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
> index 24110f6..131c95f 100644
> --- a/drivers/serial/8250.c
> +++ b/drivers/serial/8250.c
> @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
> /*
> * Exar ST16C2550 "A2" devices incorrectly detect as
> * having an EFR, and report an ID of 0x0201. See
> - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
> + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
> */
> if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
> return 1;
> diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
> index 5318dd3..feb62a8 100644
> --- a/drivers/serial/bfin_sport_uart.c
> +++ b/drivers/serial/bfin_sport_uart.c
> @@ -10,7 +10,7 @@
>
> /*
> * This driver and the hardware supported are in term of EE-191 of ADI.
> - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
> + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
> * This application note describe how to implement a UART on a Sharc DSP,
> * but this driver is implemented on Blackfin Processor.
> * Transmit Frame Sync is not used by this driver to transfer data out.
> diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
> index 9ce253e..6d06ce1 100644
> --- a/drivers/serial/bfin_sport_uart.h
> +++ b/drivers/serial/bfin_sport_uart.h
> @@ -10,7 +10,7 @@
>
> /*
> * This driver and the hardware supported are in term of EE-191 of ADI.
> - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
> + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
> * This application note describe how to implement a UART on a Sharc DSP,
> * but this driver is implemented on Blackfin Processor.
> * Transmit Frame Sync is not used by this driver to transfer data out.
> diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
> index 9b03d7b..3fa2e16 100644
> --- a/drivers/serial/uartlite.c
> +++ b/drivers/serial/uartlite.c
> @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
> * Register definitions
> *
> * For register details see datasheet:
> - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
> + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
> */
>
> #define ULITE_RX 0x00
> diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
> index 96b9717..0d82a6d 100644
> --- a/drivers/staging/asus_oled/README
> +++ b/drivers/staging/asus_oled/README
> @@ -2,7 +2,7 @@
> Driver for Asus OLED display present in some Asus laptops.
>
> The code of this driver is based on 'asusoled' program taken from
> - https://launchpad.net/asusoled/. I just wanted to have a simple
> + <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple
> kernel driver for controlling this device, but I didn't know how
> to do that. Now I know ;) Also, that program can not be used
> with usbhid loaded, which means no USB mouse/keyboard while
> diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
> index 5b279fb..8c95d8c 100644
> --- a/drivers/staging/asus_oled/asus_oled.c
> +++ b/drivers/staging/asus_oled/asus_oled.c
> @@ -24,7 +24,7 @@
> *
> *
> * Asus OLED support is based on asusoled program taken from
> - * https://launchpad.net/asusoled/.
> + * <http://lapsus.berlios.de/asus_oled.html>.
> *
> *
> */
> diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
> index ced346a..78b1410 100644
> --- a/drivers/staging/comedi/drivers/cb_pcimdas.c
> +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
> @@ -37,7 +37,7 @@ Configuration Options:
> Developed from cb_pcidas and skel by Richard Bytheway (mocelet@...s.org).
> Only supports DIO, AO and simple AI in it's present form.
> No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
> -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
> +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
> */
>
> #include "../comedidev.h"
> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
> index 6af6c83..82be77d 100644
> --- a/drivers/staging/comedi/drivers/daqboard2000.c
> +++ b/drivers/staging/comedi/drivers/daqboard2000.c
> @@ -50,8 +50,8 @@ Configuration options:
> With some help from our swedish distributor, we got the Windows sourcecode
> for the card, and here are the findings so far.
>
> - 1. A good document that describes the PCI interface chip is found at:
> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
> + 1. A good document that describes the PCI interface chip is 9080db-106.pdf
> + available from http://www.plxtech.com/products/io/pci9080
>
> 2. The initialization done so far is:
> a. program the FPGA (windows code sans a lot of error messages)
> diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
> index 3acf7e6..1411dd8 100644
> --- a/drivers/staging/comedi/drivers/ni_labpc.c
> +++ b/drivers/staging/comedi/drivers/ni_labpc.c
> @@ -37,7 +37,7 @@ boards has not
> yet been added to the driver, mainly due to the fact that
> I don't know the device id numbers. If you have one
> of these boards,
> -please file a bug report at https://bugs.comedi.org/
> +please file a bug report at http://comedi.org/
> so I can get the necessary information from you.
>
> The 1200 series boards have onboard calibration dacs for correcting
> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
> index bd16f91..986ef67 100644
> --- a/drivers/staging/comedi/drivers/ni_mio_common.c
> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
> @@ -34,7 +34,7 @@
> 340747b.pdf AT-MIO E series Register Level Programmer Manual
> 341079b.pdf PCI E Series RLPM
> 340934b.pdf DAQ-STC reference manual
> - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
> + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/)
> release_ni611x.pdf
> release_ni67xx.pdf
> Other possibly relevant info:
> diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
> index 485d63f..0d254a1 100644
> --- a/drivers/staging/comedi/drivers/plx9080.h
> +++ b/drivers/staging/comedi/drivers/plx9080.h
> @@ -13,7 +13,7 @@
> *
> ********************************************************************
> *
> - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
> + * Copyright (C) 1999 RG Studio s.c.
> * Written by Krzysztof Halasa <khc@...tudio.com.pl>
> *
> * Portions (C) SBE Inc., used by permission.
> diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
> index 0367d2b..a49a7c5 100644
> --- a/drivers/staging/comedi/drivers/rtd520.c
> +++ b/drivers/staging/comedi/drivers/rtd520.c
> @@ -59,7 +59,7 @@ Configuration options:
> Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf
> Example source: http://www.rtdusa.com/examples/dm/dm7520.zip
> Call them and ask for the register level manual.
> - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm
> + PCI chip: http://www.plxtech.com/products/io/pci9080
>
> Notes:
> This board is memory mapped. There is some IO stuff, but it isn't needed.
> diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
> index 6612247..ba8f670 100644
> --- a/drivers/staging/quickstart/quickstart.c
> +++ b/drivers/staging/quickstart/quickstart.c
> @@ -5,8 +5,7 @@
> * Copyright (C) 2007-2010 Angelo Arrifano <miknix@...il.com>
> *
> * Information gathered from disassebled dsdt and from here:
> - * "http://download.microsoft.com/download/9/c/5/
> - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
> + * <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> index 1da73ec..bb44079 100644
> --- a/drivers/uio/Kconfig
> +++ b/drivers/uio/Kconfig
> @@ -17,9 +17,9 @@ config UIO_CIF
> depends on PCI
> help
> Driver for Hilscher CIF DeviceNet and Profibus cards. This
> - driver requires a userspace component that handles all of the
> - heavy lifting and can be found at:
> - http://www.osadl.org/projects/downloads/UIO/user/cif-*
> + driver requires a userspace component called cif that handles
> + all of the heavy lifting and can be found at:
> + <http://www.osadl.org/projects/downloads/UIO/user/>
>
> To compile this driver as a module, choose M here: the module
> will be called uio_cif.
> diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
> index 916b2b6..b71e309 100644
> --- a/drivers/usb/serial/Kconfig
> +++ b/drivers/usb/serial/Kconfig
> @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR
> help
> Say Y here if you want to connect to your HandSpring Visor, Palm
> m500 or m505 through its USB docking station. See
> - <http://usbvisor.sourceforge.net/> for more information on using this
> + <http://usbvisor.sourceforge.net/index.php3> for more information on using this
> driver.
>
> To compile this driver as a module, choose M here: the
> @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN
> and was developed with their support. You must also include
> firmware to support your particular device(s).
>
> - See <http://misc.nu/hugh/keyspan.html> for more information.
> + See <http://blemings.org/hugh/keyspan.html> for more information.
>
> To compile this driver as a module, choose M here: the
> module will be called keyspan.
> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
> index 15a4583..28c640d 100644
> --- a/drivers/usb/serial/ftdi_sio_ids.h
> +++ b/drivers/usb/serial/ftdi_sio_ids.h
> @@ -46,7 +46,7 @@
> #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
>
> /* OOCDlink by Joern Kaipf <joernk@....de>
> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
> + * (http://www.joernonline.de/) */
> #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
>
> /* Luminary Micro Stellaris Boards, VID = FTDI_VID */
> @@ -335,7 +335,7 @@
> #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
>
> /* ACT Solutions HomePro ZWave interface
> - (http://www.act-solutions.com/HomePro.htm) */
> + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
> #define FTDI_ACTZWAVE_PID 0xF2D0
>
> /*
> @@ -366,7 +366,7 @@
> #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
>
> /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
> -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
> +/* http://www.usbuirt.com/ */
> #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
>
> /* CCS Inc. ICDU/ICDU40 product ID -
> @@ -395,7 +395,7 @@
> */
> #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
>
> -/* Inside Accesso contactless reader (http://www.insidefr.com) */
> +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
> #define INSIDE_ACCESSO 0xFAD0
>
> /*
> @@ -634,14 +634,14 @@
>
> /*
> * JETI SPECTROMETER SPECBOS 1201
> - * http://www.jeti.com/products/sys/scb/scb1201.php
> + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
> */
> #define JETI_VID 0x0c6c
> #define JETI_SPC1201_PID 0x04b2
>
> /*
> * FTDI USB UART chips used in construction projects from the
> - * Elektor Electronics magazine (http://elektor-electronics.co.uk)
> + * Elektor Electronics magazine (http://www.elektor.com/)
> */
> #define ELEKTOR_VID 0x0C7D
> #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
> diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
> index 297163c..0791778 100644
> --- a/drivers/usb/serial/keyspan.c
> +++ b/drivers/usb/serial/keyspan.c
> @@ -9,7 +9,7 @@
> the Free Software Foundation; either version 2 of the License, or
> (at your option) any later version.
>
> - See http://misc.nu/hugh/keyspan.html for more information.
> + See http://blemings.org/hugh/keyspan.html for more information.
>
> Code in this driver inspired by and in a number of places taken
> from Brian Warner's original Keyspan-PDA driver.
> diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
> index bf3297d..2d8baf6 100644
> --- a/drivers/usb/serial/keyspan.h
> +++ b/drivers/usb/serial/keyspan.h
> @@ -9,7 +9,7 @@
> the Free Software Foundation; either version 2 of the License, or
> (at your option) any later version.
>
> - See http://misc.nu/hugh/keyspan.html for more information.
> + See http://blemings.org/hugh/keyspan.html for more information.
>
> Code in this driver inspired by and in a number of places taken
> from Brian Warner's original Keyspan-PDA driver.
> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
> index 3a3f5e6..d325bb8 100644
> --- a/drivers/usb/serial/mct_u232.h
> +++ b/drivers/usb/serial/mct_u232.h
> @@ -10,10 +10,9 @@
> *
> * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
> * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
> - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
> - * information. The properties of this device are listed at the end of this
> - * file. This device is available from various distributors. I know Hana,
> - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
> + * for further information. The properties of this device are listed at the end
> + * of this file. This device was used in the Dlink DSB-S25.
> *
> * All of the information about the device was acquired by using SniffUSB
> * on Windows98. The technical details of the reverse engineering are
> @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
> * embedded UART. Exhaustive documentation for these is available at:
> *
> * http://www.semiconductors.philips.com/pip/p87c52ubaa
> - * http://www.semiconductors.philips.com/pip/pdiusbd12
> + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf
> *
> * Thanks to Julian Highfield for the pointer to the Philips database.
> *
> diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
> index 8a372ba..b356e15 100644
> --- a/drivers/usb/storage/Kconfig
> +++ b/drivers/usb/storage/Kconfig
> @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB
> depends on USB_STORAGE
> help
> Support for certain Datafab CompactFlash readers.
> - Datafab has a web page at <http://www.datafabusa.com/>.
> + Datafab has a web page at <http://www.datafab.com/>.
>
> If this driver is compiled as a module, it will be named ums-datafab.
>
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 8b31fdf..dc06ff1 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -49,7 +49,7 @@ menuconfig FB
> You need an utility program called fbset to make full use of frame
> buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
> and the Framebuffer-HOWTO at
> - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
> + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
> information.
>
> Say Y here and to the driver for your graphics board below if you
> @@ -955,7 +955,7 @@ config FB_EPSON1355
> Build in support for the SED1355 Epson Research Embedded RAMDAC
> LCD/CRT Controller (since redesignated as the S1D13505) as a
> framebuffer. Product specs at
> - <http://www.erd.epson.com/vdc/html/products.htm>.
> + <http://vdc.epson.com/>.
>
> config FB_S1D13XXX
> tristate "Epson S1D13XXX framebuffer support"
> @@ -966,7 +966,7 @@ config FB_S1D13XXX
> help
> Support for S1D13XXX framebuffer device family (currently only
> working with S1D13806). Product specs at
> - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
> + <http://vdc.epson.com/>
>
> config FB_ATMEL
> tristate "AT91/AT32 LCD Controller support"
> @@ -1323,7 +1323,7 @@ config FB_RADEON
> don't need to choose this to run the Radeon in plain VGA mode.
>
> There is a product page at
> - http://apps.ati.com/ATIcompare/
> + http://products.amd.com/en-us/GraphicCardResult.aspx
>
> config FB_RADEON_I2C
> bool "DDC/I2C for ATI Radeon support"
> @@ -1395,7 +1395,7 @@ config FB_ATY_CT
> Say Y here to support use of ATI's 64-bit Rage boards (or other
> boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
> framebuffer device. The ATI product support page for these boards
> - is at <http://support.ati.com/products/pc/mach64/>.
> + is at <http://support.ati.com/products/pc/mach64/mach64.html>.
>
> config FB_ATY_GENERIC_LCD
> bool "Mach64 generic LCD support (EXPERIMENTAL)"
> diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
> index f3d7440..3ec4923 100644
> --- a/drivers/video/arcfb.c
> +++ b/drivers/video/arcfb.c
> @@ -2,7 +2,6 @@
> * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
> *
> * Copyright (C) 2005, Jaya Kumar <jayalk@...works.biz>
> - * http://www.intworks.biz/arclcd
> *
> * This file is subject to the terms and conditions of the GNU General Public
> * License. See the file COPYING in the main directory of this archive for
> diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
> index db9713b..a268cbf 100644
> --- a/drivers/video/epson1355fb.c
> +++ b/drivers/video/epson1355fb.c
> @@ -4,7 +4,7 @@
> * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
> * (previously known as SED1355)
> *
> - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html
> + * Cf. http://vdc.epson.com/
> *
> *
> * Copyright (C) Hewlett-Packard Company. All rights reserved.
> diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c
> index 7293eac..7cb715d 100644
> --- a/drivers/video/fbcvt.c
> +++ b/drivers/video/fbcvt.c
> @@ -5,7 +5,7 @@
> *
> * Based from the VESA(TM) Coordinated Video Timing Generator by
> * Graham Loveridge April 9, 2003 available at
> - * http://www.vesa.org/public/CVT/CVTd6r1.xls
> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> *
> * This file is subject to the terms and conditions of the GNU General Public
> * License. See the file COPYING in the main directory of this archive
> diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
> index c77bcc6..e225c00 100644
> --- a/drivers/video/hecubafb.c
> +++ b/drivers/video/hecubafb.c
> @@ -10,7 +10,7 @@
> *
> * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
> * This work was possible because of apollo display code from E-Ink's website
> - * http://support.eink.com/community
> + * http://eink.com/
> * All information used to write this code is from public material made
> * available by E-Ink on its support site. Some commands such as 0xA4
> * were found by looping through cmd=0x00 thru 0xFF and supplying random
> diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
> index 9b3d6e4..63ed3b7 100644
> --- a/drivers/video/metronomefb.c
> +++ b/drivers/video/metronomefb.c
> @@ -10,7 +10,7 @@
> * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
> *
> * This work was made possible by help and equipment support from E-Ink
> - * Corporation. http://support.eink.com/community
> + * Corporation. http://www.eink.com/
> *
> * This driver is written to be used with the Metronome display controller.
> * It is intended to be architecture independent. A board specific driver
> diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S
> index 418fe69..f3acc19 100644
> --- a/firmware/keyspan_pda/keyspan_pda.S
> +++ b/firmware/keyspan_pda/keyspan_pda.S
> @@ -74,7 +74,7 @@
> * recognizes the new device ID and glues it to the real serial driver code.
> *
> * USEFUL DOCS:
> - * EzUSB Technical Reference Manual: <http://www.anchorchips.com>
> + * EzUSB Technical Reference Manual: <http://www.cypress.com/>
> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
> * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
> * use totally different registers!
> diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S
> index 05d99dd..0b79bbf 100644
> --- a/firmware/keyspan_pda/xircom_pgs.S
> +++ b/firmware/keyspan_pda/xircom_pgs.S
> @@ -74,7 +74,7 @@
> * recognizes the new device ID and glues it to the real serial driver code.
> *
> * USEFUL DOCS:
> - * EzUSB Technical Reference Manual: <http://www.anchorchips.com>
> + * EzUSB Technical Reference Manual: <http://www.cypress.com/>
> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
> * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
> * use totally different registers!
> diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
> index 6bbd75c..7c232c1 100644
> --- a/fs/hostfs/hostfs.h
> +++ b/fs/hostfs/hostfs.h
> @@ -28,12 +28,7 @@
> * #define ATTR_KILL_SUID 2048
> * #define ATTR_KILL_SGID 4096
> *
> - * and this is because they were added in 2.5 development in this patch:
> - *
> - * http://linux.bkbits.net:8080/linux-2.5/
> - * cset@...f4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html
> - * |src/.|src/include|src/include/linux|related/include/linux/fs.h
> - *
> + * and this is because they were added in 2.5 development.
> * Actually, they are not needed by most ->setattr() methods - they are set by
> * callers of notify_change() to notify that the setuid/setgid bits must be
> * dropped.
> diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
> index 5bf8a04..789c625 100644
> --- a/fs/partitions/ldm.c
> +++ b/fs/partitions/ldm.c
> @@ -5,7 +5,7 @@
> * Copyright (c) 2001-2007 Anton Altaparmakov
> * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@...ia.com>
> *
> - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
> + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
> *
> * This program is free software; you can redistribute it and/or modify it under
> * the terms of the GNU General Public License as published by the Free Software
> diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
> index d1fb50b..374242c 100644
> --- a/fs/partitions/ldm.h
> +++ b/fs/partitions/ldm.h
> @@ -5,7 +5,7 @@
> * Copyright (c) 2001-2007 Anton Altaparmakov
> * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@...ia.com>
> *
> - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
> + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License as published by the Free
> diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
> index 513f431..7cd4666 100644
> --- a/fs/reiserfs/Kconfig
> +++ b/fs/reiserfs/Kconfig
> @@ -10,7 +10,8 @@ config REISERFS_FS
>
> In general, ReiserFS is as fast as ext2, but is very efficient with
> large directories and small files. Additional patches are needed
> - for NFS and quotas, please see <http://www.namesys.com/> for links.
> + for NFS and quotas, please see
> + <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links.
>
> It is more easily extended to have features currently found in
> database and keyword search systems than block allocation based file
> @@ -18,7 +19,8 @@ config REISERFS_FS
> plugins consistent with our motto ``It takes more than a license to
> make source code open.''
>
> - Read <http://www.namesys.com/> to learn more about reiserfs.
> + Read <https://reiser4.wiki.kernel.org/index.php/Main_Page>
> + to learn more about reiserfs.
>
> Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
>
> diff --git a/fs/reiserfs/README b/fs/reiserfs/README
> index 14e8c9d..e2f7a26 100644
> --- a/fs/reiserfs/README
> +++ b/fs/reiserfs/README
> @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.)
> [END LICENSING]
>
> Reiserfs is a file system based on balanced tree algorithms, which is
> -described at http://devlinux.com/namesys.
> +described at https://reiser4.wiki.kernel.org/index.php/Main_Page
>
> Stop reading here. Go there, then return.
>
> diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
> index 4086b8e..da2530e 100644
> --- a/include/crypto/gf128mul.h
> +++ b/include/crypto/gf128mul.h
> @@ -54,8 +54,8 @@
>
> /* Comment by Rik:
> *
> - * For some background on GF(2^128) see for example: http://-
> - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
> + * For some background on GF(2^128) see for example:
> + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
> *
> * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
> * be mapped to computer memory in a variety of ways. Let's examine
> diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
> index c2eeb63..61ce641 100644
> --- a/include/linux/fdreg.h
> +++ b/include/linux/fdreg.h
> @@ -89,7 +89,7 @@
> /* the following commands are new in the 82078. They are not used in the
> * floppy driver, except the first three. These commands may be useful for apps
> * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
> - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
> + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
>
> #define FD_PARTID 0x18 /* part id ("extended" version cmd) */
> #define FD_SAVE 0x2e /* save fdc regs for later restore */
> diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
> index 3e659ec..7d95847 100644
> --- a/include/linux/if_infiniband.h
> +++ b/include/linux/if_infiniband.h
> @@ -5,7 +5,7 @@
> * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
> * license, available in the LICENSE.TXT file accompanying this
> * software. These details are also available at
> - * <http://openib.org/license.html>.
> + * <http://www.openfabrics.org/software_license.htm>.
> *
> * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
> index de24af7..54b8e0d 100644
> --- a/include/linux/n_r3964.h
> +++ b/include/linux/n_r3964.h
> @@ -4,7 +4,6 @@
> * Copyright by
> * Philips Automation Projects
> * Kassel (Germany)
> - * http://www.pap-philips.de
> * -----------------------------------------------------------
> * This software may be used and distributed according to the terms of
> * the GNU General Public License, incorporated herein by reference.
> diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
> index 2a72aa9..705e53e 100644
> --- a/net/ax25/Kconfig
> +++ b/net/ax25/Kconfig
> @@ -7,7 +7,7 @@ menuconfig HAMRADIO
> bool "Amateur Radio support"
> help
> If you want to connect your Linux box to an amateur radio, answer Y
> - here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>
> + here. You want to read <http://www.tapr.org/>
> and more specifically about AX.25 on Linux
> <http://www.linux-ax25.org/>.
>
> @@ -42,7 +42,7 @@ config AX25
> check out the file <file:Documentation/networking/ax25.txt> in the
> kernel source. More information about digital amateur radio in
> general is on the WWW at
> - <http://www.tapr.org/tapr/html/pkthome.html>.
> + <http://www.tapr.org/>.
>
> To compile this driver as a module, choose M here: the
> module will be called ax25.
> @@ -89,7 +89,7 @@ config NETROM
> <http://www.linux-ax25.org>. You also might want to check out the
> file <file:Documentation/networking/ax25.txt>. More information about
> digital amateur radio in general is on the WWW at
> - <http://www.tapr.org/tapr/html/pkthome.html>.
> + <http://www.tapr.org/>.
>
> To compile this driver as a module, choose M here: the
> module will be called netrom.
> @@ -108,7 +108,7 @@ config ROSE
> <http://www.linux-ax25.org>. You also might want to check out the
> file <file:Documentation/networking/ax25.txt>. More information about
> digital amateur radio in general is on the WWW at
> - <http://www.tapr.org/tapr/html/pkthome.html>.
> + <http://www.tapr.org/>.
>
> To compile this driver as a module, choose M here: the
> module will be called rose.
> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
> index 571f895..4123d5b 100644
> --- a/net/ipv4/Kconfig
> +++ b/net/ipv4/Kconfig
> @@ -84,7 +84,7 @@ config IP_FIB_TRIE
>
> An experimental study of compression methods for dynamic tries
> Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
> - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
> + <http://www.csc.kth.se/~snilsson/software/dyntrie2/>
>
> endchoice
>
> @@ -555,7 +555,7 @@ config TCP_CONG_VENO
> distinguishing to circumvent the difficult judgment of the packet loss
> type. TCP Veno cuts down less congestion window in response to random
> loss packets.
> - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
> + See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
>
> config TCP_CONG_YEAH
> tristate "YeAH TCP"
> diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
> index 3a92a76..094e150 100644
> --- a/net/ipv4/cipso_ipv4.c
> +++ b/net/ipv4/cipso_ipv4.c
> @@ -9,7 +9,7 @@
> *
> * The CIPSO draft specification can be found in the kernel's Documentation
> * directory as well as the following URL:
> - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
> + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt
> * The FIPS-188 specification can be found at the following URL:
> * http://www.itl.nist.gov/fipspubs/fip188.htm
> *
> diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
> index 4a8e370..d9818c5 100644
> --- a/net/ipv4/fib_trie.c
> +++ b/net/ipv4/fib_trie.c
> @@ -16,7 +16,7 @@
> *
> * An experimental study of compression methods for dynamic tries
> * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
> - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
> + * http://www.csc.kth.se/~snilsson/software/dyntrie2/
> *
> *
> * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
> diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
> index 1833bdb..d048275 100644
> --- a/net/ipv4/netfilter/Kconfig
> +++ b/net/ipv4/netfilter/Kconfig
> @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
> which can only be viewed through syslog.
>
> The appropriate userspace logging daemon (ulogd) may be obtained from
> - <http://www.gnumonks.org/projects/ulogd/>
> + <http://www.netfilter.org/projects/ulogd/index.html>
>
> To compile it as a module, choose M here. If unsure, say N.
>
> diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
> index 1eba160..00ca688 100644
> --- a/net/ipv4/tcp_illinois.c
> +++ b/net/ipv4/tcp_illinois.c
> @@ -6,7 +6,7 @@
> * The algorithm is described in:
> * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
> * for High-Speed Networks"
> - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf
> + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf
> *
> * Implemented from description in paper and ns-2 simulation.
> * Copyright (C) 2007 Stephen Hemminger <shemminger@...ux-foundation.org>
> diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
> index e663b78..bccce34 100644
> --- a/net/ipv4/tcp_input.c
> +++ b/net/ipv4/tcp_input.c
> @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss);
> *
> * The algorithm for RTT estimation w/o timestamps is based on
> * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.
> - * <http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps>
> + * <http://public.lanl.gov/radiant/pubs.html#DRS>
> *
> * More detail on this code can be found at
> - * <http://www.psc.edu/~jheffner/senior_thesis.ps>,
> + * <http://staff.psc.edu/jheffner/>,
> * though this reference is out of date. A new paper
> * is pending.
> */
> diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
> index b612acf..38bc0b5 100644
> --- a/net/ipv4/tcp_veno.c
> +++ b/net/ipv4/tcp_veno.c
> @@ -6,7 +6,7 @@
> * "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks."
> * IEEE Journal on Selected Areas in Communication,
> * Feb. 2003.
> - * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
> + * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
> */
>
> #include <linux/mm.h>
> diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
> index c4c885d..3fb2b73 100644
> --- a/net/netfilter/nf_conntrack_proto_tcp.c
> +++ b/net/netfilter/nf_conntrack_proto_tcp.c
> @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph)
> /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering
> in IP Filter' by Guido van Rooij.
>
> - http://www.nluug.nl/events/sane2000/papers.html
> - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz
> + http://www.sane.nl/events/sane2000/papers.html
> + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/
>
> The boundaries and the conditions are changed according to RFC793:
> the packet must intersect the window (i.e. segments may be
> diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
> index 456a1b4..854c303 100644
> --- a/sound/oss/ac97_codec.c
> +++ b/sound/oss/ac97_codec.c
> @@ -21,11 +21,8 @@
> *
> **************************************************************************
> *
> - * The Intel Audio Codec '97 specification is available at the Intel
> - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
> - *
> - * The specification itself is currently available at:
> - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
> + * The Intel Audio Codec '97 specification is available at:
> + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
> *
> **************************************************************************
> *
> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
> index c7fba53..537cfba 100644
> --- a/sound/pci/ens1370.c
> +++ b/sound/pci/ens1370.c
> @@ -22,7 +22,7 @@
> /* Power-Management-Code ( CONFIG_PM )
> * for ens1371 only ( FIXME )
> * derived from cs4281.c, atiixp.c and via82xx.c
> - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
> + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
> * by Kurt J. Bosch
> */
>
> diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
> index 4677492..400f9eb 100644
> --- a/sound/pci/intel8x0.c
> +++ b/sound/pci/intel8x0.c
> @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich
> * Intel 82443MX running a 100MHz processor system bus has a hardware bug,
> * which aborts PCI busmaster for audio transfer. A workaround is to set
> * the pages as non-cached. For details, see the errata in
> - * http://www.intel.com/design/chipsets/specupdt/245051.htm
> + * http://download.intel.com/design/chipsets/specupdt/24505108.pdf
> */
> static void fill_nocache(void *buf, int size, int nocache)
> {
>
Powered by blists - more mailing lists