| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0B9F1C5B86169C4EA9D042C251022E49105CEE87D0@SAFEX1MAIL3.st.com>
Date: Wed, 29 Sep 2010 19:08:38 +0200
From: Christophe Henri RICARD <christophe-h.ricard@...com>
To: James Morris <jmorris@...ei.org>
Cc: Rajiv Andrade <srajiv@...ux.vnet.ibm.com>,
Joe Perches <joe@...ches.com>,
Marcel Selhorst <m.selhorst@...rix.com>,
Debora Velarde <debora@...ux.vnet.ibm.com>,
"tpmdd-devel@...ts.sourceforge.net"
<tpmdd-devel@...ts.sourceforge.net>,
LKML <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 2/2] drivers/char/tpm/tpm_stm_st19_i2c.c: Add missing
break and neatening
Hi James, Rajiv,
The last one includes all the patches and some comments cleaning.
Let me know if you need some information's or have some improvements I have to do.
Thanks
Christophe
-----Original Message-----
From: James Morris [mailto:jmorris@...ei.org]
Sent: Thursday, September 23, 2010 6:39 PM
To: Christophe Henri RICARD
Cc: Rajiv Andrade; Joe Perches; Marcel Selhorst; Debora Velarde; tpmdd-devel@...ts.sourceforge.net; LKML
Subject: RE: [PATCH 2/2] drivers/char/tpm/tpm_stm_st19_i2c.c: Add missing break and neatening
Which patches need to be applied to the tree?
Rajiv: can you please send them to me as plain text inline, against my
-next tree, with your signoffs?
On Fri, 17 Sep 2010, Christophe Henri RICARD wrote:
> Rajiv,
> Please find in attached file a full patch (driver + Joe Perches observations/patches + comments update).
> This patch has been tested.
>
> Thanks
> Christophe
>
> -----Original Message-----
> From: Rajiv Andrade [mailto:srajiv@...ux.vnet.ibm.com]
> Sent: Tuesday, September 14, 2010 12:11 PM
> To: Joe Perches
> Cc: Christophe Henri RICARD; Marcel Selhorst; Debora Velarde; James Morris; tpmdd-devel@...ts.sourceforge.net; LKML
> Subject: Re: [PATCH 2/2] drivers/char/tpm/tpm_stm_st19_i2c.c: Add missing break and neatening
>
> Chris, did you have the chance to test it against this specific TPM?
> Despite this, the patch looks pretty good, thanks Joe.
>
> Acked-by: Rajiv Andrade <srajiv@...ux.vnet.ibm.com>
>
> On Fri, 2010-09-03 at 16:29 -0700, Joe Perches wrote:
> > Add missing break in wait_until_good_shape
> > Use init; while (test) loops not for(init;test;)
> > Calculate bytes to transfer using if and min_t not multiple ?:
> > Miscellaneous function whitespace aliging
> >
> > Signed-off-by: Joe Perches <joe@...ches.com>
> > ---
> > drivers/char/tpm/tpm_stm_st19_i2c.c | 158 +++++++++++++++++++----------------
> > 1 files changed, 85 insertions(+), 73 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_stm_st19_i2c.c b/drivers/char/tpm/tpm_stm_st19_i2c.c
> > index cdf2eb3..4b1ed05 100644
> > --- a/drivers/char/tpm/tpm_stm_st19_i2c.c
> > +++ b/drivers/char/tpm/tpm_stm_st19_i2c.c
> > @@ -158,8 +158,10 @@ static int wait_until_good_shape(void)
> > else if (!signal_pending(current)) {
> > ret = schedule_timeout(time);
> > wait_time += time;
> > - } else
> > + } else {
> > ret = -ERESTARTSYS;
> > + break;
> > + }
> > } while (1);
> > finish_wait(&queue, &__wait);
> >
> > @@ -204,10 +206,10 @@ static int wait_event_interruptible_on_gpio(wait_queue_head_t queue,
> > else if (wait_time >= timeout)
> > break;
> > else if (!signal_pending(current)) {
> > - ret =
> > - schedule_timeout(msecs_to_jiffies
> > - (TICK_GPIO_SPOOLING));
> > - wait_time += msecs_to_jiffies(TICK_GPIO_SPOOLING);
> > + int time = msecs_to_jiffies(TICK_GPIO_SPOOLING);
> > +
> > + ret = schedule_timeout(time);
> > + wait_time += time;
> > } else {
> > ret = -ERESTARTSYS;
> > break;
> > @@ -286,9 +288,9 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
> > /* sending data (data_avail_pin hight) */
> > /* If data are available, we read the data */
> > init_waitqueue_head(&pin_infos->write_queue);
> > - pin = wait_event_interruptible_on_gpio(pin_infos->write_queue,
> > - tpm_calc_ordinal_duration
> > - (chip, ordinal));
> > + pin = wait_event_interruptible_on_gpio(
> > + pin_infos->write_queue,
> > + tpm_calc_ordinal_duration(chip, ordinal));
> > if (pin < 0) {
> > ret = pin;
> > goto end;
> > @@ -297,25 +299,30 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
> > client->flags = I2C_M_RD;
> >
> > size = TPM_HEADER_SIZE;
> > - for (i = 0; pin == DATA_ON && i < size;) {
> > - ret = i2c_master_recv(client,
> > - pin_infos->tpm_i2c_buffer[1],
> > - (i == 0) ? TPM_HEADER_SIZE :
> > - count - i > TPM_I2C_BLOCK_SIZE ?
> > - TPM_I2C_BLOCK_SIZE : count - i);
> > + i = 0;
> > + while (i < size && pin == DATA_ON) {
> > + int bytes;
> > +
> > + if (i == 0)
> > + bytes = TPM_HEADER_SIZE;
> > + else
> > + bytes = min_t(int, count - i, TPM_I2C_BLOCK_SIZE);
> > +
> > + ret = i2c_master_recv(client, pin_infos->tpm_i2c_buffer[1],
> > + bytes);
> > if (ret < 0)
> > goto end;
> > - if (i == 0)
> > - size =
> > - responseSize(pin_infos->tpm_i2c_buffer[1], count);
> > - (i == 0) ? (i += TPM_HEADER_SIZE) : (i += TPM_I2C_BLOCK_SIZE);
> > + if (i == 0) {
> > + size = responseSize(pin_infos->tpm_i2c_buffer[1],
> > + count);
> > + i += TPM_HEADER_SIZE;
> > + } else
> > + i += TPM_I2C_BLOCK_SIZE;
> >
> > if (i < size)
> > - pin =
> > - wait_event_interruptible_on_gpio(pin_infos->
> > - write_queue,
> > - msecs_to_jiffies
> > - (TPM_I2C_SHORT));
> > + pin = wait_event_interruptible_on_gpio(
> > + pin_infos->write_queue,
> > + msecs_to_jiffies(TPM_I2C_SHORT));
> > }
> >
> > pin = wait_event_interruptible_on_gpio(pin_infos->write_queue,
> > @@ -325,36 +332,41 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
> > client->flags = 0;
> >
> > size = TPM_HEADER_SIZE;
> > - for (i = 0; i < size && pin == COMMAND_ON;) {
> > - memcpy(pin_infos->tpm_i2c_buffer[0], buf + i,
> > - (i == 0) ? TPM_HEADER_SIZE : count - i >
> > - TPM_I2C_BLOCK_SIZE ? TPM_I2C_BLOCK_SIZE : count - i);
> > + i = 0;
> > + while (i < size && pin == COMMAND_ON) {
> > + int bytes;
> > +
> > + if (i == 0)
> > + bytes = TPM_HEADER_SIZE;
> > + else
> > + bytes = min_t(int, count - i, TPM_I2C_BLOCK_SIZE);
> > +
> > + memcpy(pin_infos->tpm_i2c_buffer[0], buf + i, bytes);
> >
> > if (i == 0) {
> > size = responseSize(buf, count);
> > - size = (size < count ? size : count);
> > + size = size < count ? size : count;
> > }
> > - ret =
> > - i2c_master_send(client,
> > - pin_infos->tpm_i2c_buffer[0],
> > - count >= TPM_HEADER_SIZE ? (i ==
> > - 0) ?
> > - TPM_HEADER_SIZE : count - i >
> > - TPM_I2C_BLOCK_SIZE ? TPM_I2C_BLOCK_SIZE :
> > - count - i : count);
> > +
> > + if (count < TPM_HEADER_SIZE)
> > + bytes = count;
> > +
> > + ret = i2c_master_send(client, pin_infos->tpm_i2c_buffer[0],
> > + bytes);
> > if (ret < 0) {
> > pr_info("Failed to send data\n");
> > goto end;
> > }
> >
> > - (i == 0) ? (i += TPM_HEADER_SIZE) : (i += TPM_I2C_BLOCK_SIZE);
> > + if (i == 0)
> > + i += TPM_HEADER_SIZE;
> > + else
> > + i += TPM_I2C_BLOCK_SIZE;
> > /* Wait for AcceptCmd signal hight */
> > if (i < size)
> > - pin =
> > - wait_event_interruptible_on_gpio(pin_infos->
> > - write_queue,
> > - msecs_to_jiffies
> > - (TPM_I2C_SHORT));
> > + pin = wait_event_interruptible_on_gpio(
> > + pin_infos->write_queue,
> > + msecs_to_jiffies(TPM_I2C_SHORT));
> >
> > if (pin != COMMAND_ON) {
> > pr_info("Failed to read gpio pin (AcceptCmd)\n");
> > @@ -362,6 +374,7 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
> > goto end;
> > }
> > }
> > +
> > if (i == 0) {
> > pr_info("Failed to read gpio pin (AcceptCmd)\n");
> > ret = -EIO;
> > @@ -412,49 +425,48 @@ static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
> >
> > /* Spool on the good gpio as long as pin GPIO 3 not HIGHT */
> > init_waitqueue_head(&chip->vendor.read_queue);
> > - pin = wait_event_interruptible_on_gpio(chip->vendor.read_queue,
> > - tpm_calc_ordinal_duration
> > - (chip, TPM_I2C_ORDINAL_LONG));
> > + pin = wait_event_interruptible_on_gpio(
> > + chip->vendor.read_queue,
> > + tpm_calc_ordinal_duration(chip, TPM_I2C_ORDINAL_LONG));
> >
> > size = TPM_HEADER_SIZE;
> > - for (i = 0; i < size && pin == DATA_ON;) {
> > - ret =
> > - i2c_master_recv(client,
> > - pin_infos->tpm_i2c_buffer[1],
> > - (count >= TPM_HEADER_SIZE ? i ==
> > - 0 ? TPM_HEADER_SIZE : (size - i) >
> > - TPM_I2C_BLOCK_SIZE ? TPM_I2C_BLOCK_SIZE :
> > - size - i : count));
> > + i = 0;
> > + while (i < size && pin == DATA_ON) {
> > + int bytes;
> > +
> > + if (count < TPM_HEADER_SIZE)
> > + bytes = count;
> > + else if (i == 0)
> > + bytes = TPM_HEADER_SIZE;
> > + else
> > + bytes = min_t(int, size - i, TPM_I2C_BLOCK_SIZE);
> > +
> > + ret = i2c_master_recv(client, pin_infos->tpm_i2c_buffer[1],
> > + bytes);
> > if (ret < 0) {
> > pr_info("Failed to read gpio pin (DataAvailable)\n");
> > goto end;
> > }
> >
> > - if (buf != NULL) {
> > - memcpy(buf + i, pin_infos->tpm_i2c_buffer[1],
> > - (count >= TPM_HEADER_SIZE ? i == 0 ?
> > - TPM_HEADER_SIZE : (size - i) >
> > - TPM_I2C_BLOCK_SIZE ? TPM_I2C_BLOCK_SIZE : size -
> > - i : count));
> > -
> > - if (i == 0) {
> > - size = responseSize(buf, size);
> > - if (size > count)
> > - size = count;
> > - }
> > - } else {
> > + if (!buf) {
> > pr_info("read buffer is NULL\n");
> > goto end;
> > }
> >
> > - (i == 0) ? (i += TPM_HEADER_SIZE) : (i += TPM_I2C_BLOCK_SIZE);
> > + memcpy(buf + i, pin_infos->tpm_i2c_buffer[1], size);
> > +
> > + if (i == 0) {
> > + size = responseSize(buf, size);
> > + if (size > count)
> > + size = count;
> > + i += TPM_HEADER_SIZE;
> > + } else
> > + i += TPM_I2C_BLOCK_SIZE;
> >
> > if (i < size)
> > - pin =
> > - wait_event_interruptible_on_gpio(chip->vendor.
> > - read_queue,
> > - msecs_to_jiffies
> > - (TPM_I2C_SHORT));
> > + pin = wait_event_interruptible_on_gpio(
> > + chip->vendor.read_queue,
> > + msecs_to_jiffies(TPM_I2C_SHORT));
> > }
> >
> > if (i == 0) {
> > @@ -532,7 +544,7 @@ static ssize_t tpm_st19_i2c_ioctl(struct inode *inode, struct file *file,
> > return -ENOSYS;
> > case TPMIOC_TRANSMIT:
> > if (copy_from_user(pin_infos->tpm_i2c_buffer[0],
> > - (const char *)arg, TPM_HEADER_SIZE))
> > + (const char *)arg, TPM_HEADER_SIZE))
> > return -EFAULT;
> > in_size = responseSize(pin_infos->tpm_i2c_buffer[0],
> > TPM_HEADER_SIZE);
>
>
>
--
James Morris
<jmorris@...ei.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists